-
Casio IT-700/70 - page 1
8 5 2 7 4 1 0 9 6 3 Fn – CLR Getting Started with the Pocket PC T erminal (Hardware Manual) P User documentation consists of two manuals: Pocket PC User ’ s Guide and Getting Started with the Pocket PC T erminal . Be sure to read this Getting Started Manual first. Be sure to read the Safety Precautions contained in this Getting Started Manual t ...
-
Casio IT-700/70 - page 2
• Microsoft, W indows, and W indo ws NT are either re gistered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Pentium is a registered trademark of Intel Corporation. • CompactFlash is a registered trademark of SanDisk Corporation. • Datalight is a registered trademark of Datalight, Inc. • ...
-
Casio IT-700/70 - page 3
1 W arning Caution Danger Safety Precautions Congratulations upon your selection of this CASIO Product. Be sure to read the following Safety Precautions before trying to use it for the f irst time. Markings and Symbols The following ar e the meanings of the markings and symbols used in these Safety Precautions. This symbol indicates information tha ...
-
Casio IT-700/70 - page 4
2 W arning Foreign Objects • Should any foreign matter get into the Pock et PC T er minal, immediately turn off the po wer and contact your or iginal dealer or an authorized CASIO service provider . Continued use creates the danger of fire and electric shock. Dropping and Damage • Should you drop the Pocket PC T erminal and damage it, immediate ...
-
Casio IT-700/70 - page 5
3 Caution LCD Screen • Ne ver apply strong pressure to the screen or subject it to strong impact. Doing so can crack the screen or LCD panel glass, which can cause the danger of personal injury . • Should the LCD panel glass break, ne ver touch the liquid inside. Doing so can cause skin inflammation. – Should liquid from the LCD panel acciden ...
-
Casio IT-700/70 - page 6
4 Danger • Nev er pierce the battery pack with nails, hit it with a hammer , or step on it. Doing so can create the danger of battery pack heat emission, explosion, and fir e . • Nev er try to take apart the battery pack or modify it in any w ay . Doing so creates the danger of battery pack heat emission, explosion, and fire. • Use only the s ...
-
Casio IT-700/70 - page 7
5 Caution • Should fluid from the battery pack accidentally get onto clothing or your skin, immediately rinse it of f with clean tap water . Prolonged contact with battery pack fluid can cause skin irritation. • K eep the battery pack out of the reach of small children. Do not let small children remov e the battery pack from the charger unit or ...
-
Casio IT-700/70 - page 8
6 Caution • Nev er throw the battery , subject it to strong impact. Do not allow the batter y to get wet with water . Doing so can create the danger of battery leakage, heat emission, rupture, and fire. • Do not leav e the battery in locations subject to strong direct sunlight or in high temperature locations such as in a car . Doing so can cre ...
-
Casio IT-700/70 - page 9
7 Caution • Ne ver pull on the po wer cord when unplugging it. Doing so can damage the cord and create the danger of fire and electric shock. (Al ways hold onto the plug when unplugging it from the wall outlet.) • Ne ver touch the plug while your hands are wet. Doing so can create the danger of electric shock. • Be sure to unplug the po wer c ...
-
Casio IT-700/70 - page 10
8 Operating Precautions The Pocket PC T erminal is a precision digital instrument. Incorrect operation and rough handling can cause data storage problems and other malfunction. Be sure to read the following precautions to ensure proper operation. • Charge the battery pack as soon as possible when the y start to become weak. Continued use while po ...
-
Casio IT-700/70 - page 11
9 CASIO ELECTRONICS CO., LTD. Unit 6, 1000 North Circular Road London NW2 7JD, U.K. Please keep all information for future reference. GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pur suant ...
-
Casio IT-700/70 - page 12
10 The follo wing details are declared in the 15-country EU Union and 4-country EFT A Union. Product description / Intended use EU /EFT A member states intended f or use EU : Austria, Belgium, Denmark, Finland, France, Germany , Greece, Ireland, Italy , Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom EFT A : Switzerland, Icelan ...
-
Casio IT-700/70 - page 13
11 Change or modifications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Properly shielded and grounded cables and connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits. A C adaptor with ferrite core must be used ...
-
Casio IT-700/70 - page 14
12 Contents Safety Precautions ............................................................................................ 1 Markings and Symbols ........................................................................................... 1 Precautions During Use ...................................................................................... ...
-
Casio IT-700/70 - page 15
13 Installing the Hand Strap ................................................................................ 30 I T -700/70 Specification s .................................................................................. 31 Using the Optical Communication Unit (I T -760IOE ) ..................................... 33 General Guide ................ ...
-
Casio IT-700/70 - page 16
14 Computer System Requirements Following are the minimum computer system requirements for installing and using the applications contained on the bundled Microsoft ® CD-ROM. System Requirements The minimum desktop PC system requirements for installing and running Microsoft ActiveSync 3.1 are as follows: • Microsoft W indows 2000, Microsoft W ind ...
-
Casio IT-700/70 - page 17
15 Important • Notebook computers equipped with an infrared port and modem may not be configured so the COM port is the default serial interface. In this case, you need to change the COM port configuration so the COM port is used as the default serial interface. • Even if you are using a desktop PC, check its COM port numbers before installing ...
-
Casio IT-700/70 - page 18
16 System Diagram 8 5 2 7 4 1 0 9 6 3 Fn – CLR Pocket PC T erminal IT -700M30E IT -700M30RC IT -70M30E IT -70M30RC Option List (Non-U.S. Market Models) Optical Communication Unit IT -760IOE Optical Communication Unit AC Adaptor DT -825ADP-G DT -825ADP-U Battery Pack DT -5023BA T (Standard Battery Pack) DT -5024LBA T (Large-capacity Battery Pack) ...
-
Casio IT-700/70 - page 19
17 IT -700/70 Series Options (U.S. Market Models) Optical Communication Unit IT -760IOE Optical Communication Unit AC Adaptor DT -825ADP-U Battery Pack DT -5023BA T (Standard Battery Pack) DT -5024LBA T (Large-capacity Battery Pack) Dual Charger DT -5022CHG Dual Charger AC Adaptor MPC-577ADP Pocket PC T erminal Charger IT -769CHGE CompactFlash Card ...
-
Casio IT-700/70 - page 20
18 General Guide Left Back Right 1 Indicator 1 2 Indicator 2 3 LCD/T ouch Screen 4 Program Key 5 Action Key 6 Up Key Flashes in accordance with application software configuration. Flashes or lights to indicate arrival of the alarm time, data warning, etc. Shows characters, operation indicators, etc. Pock et PC T erminal operations and data input ar ...
-
Casio IT-700/70 - page 21
19 7 Down Key 8 IR Port 9 Power Key 10 Numeric Keypad 1 1 Fn Key 12 Minus Key 13 CLR Key 14 Decimal Point Key 15 Execute Key 16 Microphone 17 Speaker 18 Headphones Jack 19 Serial Interface 20 Stylus 21 CompactFlash Card Slot 0 22 Hand Strap Hook 23 Battery Pack Cover Release 24 Battery Pack Cover 25 Backup Battery Holder 26 CompactFlash Card Slot 1 ...
-
Casio IT-700/70 - page 22
20 Setting Up the Pocket PC T erminal Aligning the T ouch Screen Y ou should align the T ouch Screen whenever you feel its response is not what it should be, or when the wrong function is performed when you tap the T ouch Screen. 1. Press the Fn ke y and then press “ 4 ” to display the T ouch Screen alignment screen. • Alternati vely , you co ...
-
Casio IT-700/70 - page 23
21 Configuring the Auto Dimmer (IT -700M30E/M30RC) The auto dimmer helps to conserve battery power by dimming the screen whenever you do not perform any Pock et PC T er minal operation for a preset amount of time. Use the following procedure to configure auto dimmer settings. 1. T ap the on-screen [Start]. 2. T ap [Settings], [System] tab, [Brightn ...
-
Casio IT-700/70 - page 24
22 Using IR Data Communication Infrared (IR) data communication can be used to pass data between two Pocket PC T erminals, etc. When performing IR data communication, make sure the IR port of the Pocket PC T erminal and the other unit are directly in line with each other . The IR data communication range is 0 (direct contact) to 1 meter (25cm for 4 ...
-
Casio IT-700/70 - page 25
23 Power Requirements The Pocket PC T erminal has a dual power supply , with a main battery to provide po wer for normal Pocket PC T erminal operations, and a memory backup battery to provide the power to retain memory contents. The main battery is a rechargeable battery pack, which is av ailab le in one of two different types; a Standard Rechar g ...
-
Casio IT-700/70 - page 26
24 T o replace the Standard Battery Pack 1. Make sure that Pocket PC T erminal po wer is turned off. If power is on, press the Po wer key to turn it of f. 2. T urn the Pocket PC T erminal ov er . 3. Slide the battery pack cover release to the [FREE] position, and then remove the cov er . 4. Remove the battery pack as shown in the illustration. 5. T ...
-
Casio IT-700/70 - page 27
25 T o replace a Large-capacity Battery Pack Y ou must use the special large-capacity battery pack co ver whene ver you are using a large-capacity battery pack to po wer the Pocket PC T erminal. For information about removing and installing the lar ge-capacity battery pack cover , see st e ps 4 and 6 under “ T o replace the Standard Batte r y P a ...
-
Casio IT-700/70 - page 28
26 W arning Make sure that the plus (+) and minus sides of the backup battery are facing correctly when you place it onto the backup battery holder . Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equi valent type recommended by the manufacturer . Dispose of used batteries according to the manufacture ...
-
Casio IT-700/70 - page 29
27 The reset operation performs a process that is similar to that performed when you restart your computer . Any unsa ved inputs or edits remaining w hen you reset the Pocket PC T erminal are lost, but settings and data stored in memory are retained. Perform the reset operation whenev er you find that the Pock et PC T erminal does not operate norma ...
-
Casio IT-700/70 - page 30
28 Full Reset (Memory Initialization) Performing a full reset clears all data stored in Pocket PC T er minal memory (RAM) and returns all settings to their initial factory defaults. Y ou should perform a full reset in the following cases. • When you want to delete all memory (RAM) contents initialize the Pocket PC T erminal • If you forget your ...
-
Casio IT-700/70 - page 31
29 3. Press the Action key again. • This performs the full reset the deletes all memory in Pocket PC T erminal memory (RAM). • Pressing the Action key again displays the start screen. Now perform the required Poc ket PC T erminal configuration settings described in the Read This First . ...
-
Casio IT-700/70 - page 32
30 Installing the Hand Strap The hand strap protects against dropping the Pocket PC T erminal when carrying it around. Important Use the following procedure to install the hand strap on the Pock et PC T erminal. 1. Pass both ends of the hand strap through the hand strap loops on the back of the Pocket PC T erminal. 2. Fold the two ends of the hand ...
-
Casio IT-700/70 - page 33
31 IT -700/70 Specifications Model: IT -700M30E, IT -700M30RC, IT -70M30E, IT -70M30RC CPU: VR4122 Memory: RAM 32MB Flash ROM 16MB (FlashFX built in) OS: Microsoft ® W indo ws ® CE V ersion 3.0 Display: IT -700: 240 × 320 dots IT -700: TFT Color LCD (65,536 colors) IT -70: 240 × 320 dots IT -70: FSTN LCD, monochrome with 4 grayscales Serial Por ...
-
Casio IT-700/70 - page 34
32 Approximate Battery Life: Main Battery: DT -5023B A T 5 hours (IT -700M30E)*; 3.5 hours (IT -700M30RC)**; 10 hours (IT -70M30E)*, 5 hours (IT -70M30RC)** DT -5024LB A T 10 hours (IT -700M30E)*; 7 hours (IT -700M30RC)**; 20 hours (IT -70M30E)*; 10 hours (IT -70M30RC)** Backup Battery: Four days when no power is supplied by main battery (When usin ...
-
Casio IT-700/70 - page 35
33 Using the Optical Communication Unit (IT -760IOE) The Optical Communication Unit (IT -760IOE) provides a serial interface (RS-232C) connection between a Pocket PC T erminal and computer for downloading and uploading system data, files, etc. It can also be used to char ge the battery pack loaded in the Pocket PC T erminal. The Optical Communicati ...
-
Casio IT-700/70 - page 36
34 1 RS-232C Interface 2 RS-422 Interf ace (C-IN) 3 RS-422 Interface (C-OUT) 4 A C Adaptor Jack 5 Hook 6 Connection Detector 7 Power Contacts 8 System Operation Indicator 9 Communication Status Indicator 10 Charge Indicator 1 1 Power Indicator 12 IR Interface 13 Power Switch 14 Base 15 DIP Switches 16 W all Hook Holes For uploading and downloading ...
-
Casio IT-700/70 - page 37
35 Optical Communication Unit Power Requirements Use the AC adaptor that comes with the Optical Comm unication Unit to power it. Be sure to connect the AC ada ptor to the Optical Communication Unit before starting a data communication operation with a Pocket PC T erminal. Power is supplied to the Pocket PC T erminal from the Optical Communication U ...
-
Casio IT-700/70 - page 38
36 Caution ■ Make sur e you char ge the battery pack in a location where the temperature is within the allo wable range for char ging. • The allo wable range for charging the battery pack is sho wn belo w . Charging in a location where the temperature is outside this range can lower battery pack performance and service life, and can also lead t ...
-
Casio IT-700/70 - page 39
37 DIP Switch Settings The DIP switches are location on the back of the Optical Communication Unit. Y ou can control the basic configuration of the Optical Communication Unit by turning the DIP switches on and off in v arious combinations. Important Use only the settings shown above. Other settings other than those noted above are for special maint ...
-
Casio IT-700/70 - page 40
38 W all Mounting the Optical Communication Unit Y ou can use the W all Mount Unit that comes with the Optical Communication Unit to configure it for wall mounting. 1. Attach the terminal support to the Optical Communication Unit. 2. Secure the terminal support in place with the two screws. 3. Remov e the two scre ws holding the hook in place. Next ...
-
Casio IT-700/70 - page 41
39 5. Press in on the sides of the base at the four locations indicated by arrows in the illustration to disengage the base tabs, and then remov e the base from the Optical Communication Unit. 6. Holding the base against the wall where you plan to af fix it use a pencil or pen to mark the locations of each wall hook (spacer + scre w). Make sure the ...
-
Casio IT-700/70 - page 42
40 9. Hook the holes of the Optical Communication Unit base onto the wall hooks and slide the Optical Communication Unit do wn to secure it. Important Be sure to periodically check wall mounted Optical Communication Units for looseness and tighten the scre ws whenev er necessary . Daisy Chaining Multiple Optical Communication Units (IT -760IOE) Y o ...
-
Casio IT-700/70 - page 43
41 Optical Communication Unit (IT -760IOE) Specifications Model: IT -760IOE IR port: Interface: IrD A V er .1.0 Standar d Synchronization: Asynchronous Data Rate: 38,400, 115,200bps RS-232C: Synchronization: Asynchronous Data Rate: 2,400 to 115,200bps RS-422: Synchronization: Asynchronous Data Rate: 9,600 to 115,200bps Power Supply: Output: DC5V 1A ...
-
Casio IT-700/70 - page 44
42 Using the Pocket PC T erminal Charger Y ou can use the optional Pocket PC T erminal Charger (IT -769CHGE) to charge the Pocket PC T erminal battery pack. The Pocket PC T erminal Charger comes with a W all Mount Unit that you can use to configure the char ger for wall mounting. • The term “Charger Unit” in this section refers to the optiona ...
-
Casio IT-700/70 - page 45
43 1 A C Adaptor Jack 2 Hook 3 Connection Detector 4 Power Contacts 5 Charge Indicator 6 Power Indicator 7 Power Switch 8 Base 9 W all Hook Holes For connection of the A C adaptor Secures the Pocket PC T erminal in place when on a wall- mounted Pocket PC T erminal Charger . Detects whether the Pocket PC T erminal is correctly mounted onto the Optic ...
-
Casio IT-700/70 - page 46
44 Charger Unit Power Requirements Use the AC adaptor tha t comes with the Charger Unit to po wer it. Using the Charger Unit 1. Plug the A C adaptor into a wall outlet. 2. After confirming that the Char ger Unit is turned of f, plug the AC adaptor cord into the A C adaptor jack on the top of the Charger Unit. 3. T urn on the Char ger Unit. • The ...
-
Casio IT-700/70 - page 47
45 Charge Indicator Lit Red: Charging Flashing Red: Battery pack abnormality Lit Green: Charging finished Important • Make sure you perform char ging within the allowab le charging temperature range, which is 0 ° C to 40 ° C (32 to 104 ° F). Char ging outside this range can lead to leaking of the battery pack and overheating. It can also lead ...
-
Casio IT-700/70 - page 48
46 Pocket PC T erminal Charger (IT -769CHGE) Specifications Power Supply: Output DC5V 1.0A Charging System: Fixed v oltage (with voltage control) Approximate Charge T ime: 4 hours (Standard Battery Pack); 8 hours (Large- capacity Battery Pack) Power Requirements: Special AC Adaptor (DT -825ADP) Consumption Current (T erminal Off): Appr oximately 80 ...
-
Casio IT-700/70 - page 49
47 Using the Dual Charger The optionally av ailable Dual Charg er (DT -5022CHG) lets you charge tw o battery packs. In this configuration, char ging of the second battery pack starts after charging of the first battery pack is complete. General Guide To p Bottom Side 1 Charge Indicator 2 A C Adaptor Jack 3 Dual Charger Connection T erminal 4 Connec ...
-
Casio IT-700/70 - page 50
48 Using the Dual Charger 1. Plug the optionally av aila ble special AC ada ptor into a wall outlet. 2. Plug the A C adaptor cord into the AC adaptor jack of the Dual Char ger . 3. Mount a Rechargeable Battery P ack onto the Dual Charger , making sure the battery pack’ s terminals are oriented correctly . • The charge indicator on the Dual Char ...
-
Casio IT-700/70 - page 51
49 Daisy Chaining Dual Charger Units Y ou can use the following procedure to daisy chain up to three Dual Char ger units and power them with a single A C adaptor . 1. Remove the connector co ver s of Dual Charger units as required. 2. Connect the connection terminals of the Dual Charger units. 3. Install the connection attachment to the bottoms of ...
-
Casio IT-700/70 - page 52
50 Dual Charger (DT -5022CHG) Specifications Model: DT -5022CHG Charging System: Fixed voltage (with voltage control) Approximate Charge T ime: 2.5 hours (1 Standard Battery Pack); 5 hours (1 Large-capacity Battery P ack); 5 hours (2 Standard Battery Packs); 10 hours (2 Lar ge-capacity Battery Packs) Power Requirements: Special A C Adaptor (MPC-577 ...
-
Casio IT-700/70 - page 53
51 Using a CompactFlash Card The Pocket PC T erminal supports use of the CompactFlash T ype I card and T ype II card (3.3V). The follo wing describes how to load and replace a CompactFlash card . Important Y ou must remov e the Slot 0 card cover when using a laser scanner or another type of card whose use makes it impossible to close the card co ve ...
-
Casio IT-700/70 - page 54
52 Loading a Card into Slot 1 Slot 1 is mainly intended for use as a memory expansion slot. Since y ou have to remo ve the main battery (battery pack) in order to load or remove a card from Slot 1, you should use it for a card you plan to leav e loaded in the Pocket PC T erminal for long periods. Use Slot 0 for cards that require frequent replaceme ...
-
Casio IT-700/70 - page 55
53 7. Replace the Slot 1 cov er . • Do not push the special tape all the way into the slot. Leave the end sticking out so you can use it the next time you need to remove the card from the slot. 8. Reload the main battery (battery pack), replace the battery pack cov er , and slide the battery pack cover release back to the [LOCK] position. When yo ...
-
Casio IT-700/70 - page 56
54 Using a Laser Scanner Installing an optional Laser Scanner Card (DT -5057CBCR) into the Pocket PC T erminal provides you with the ability to read v arious types of bar codes. General Guide Important • Do not touch the bar code reader with your fingers or allo w it to become scratched or damaged. Dirt or scratches on the bar code reader can cau ...
-
Casio IT-700/70 - page 57
55 Installing the Laser Scanner Card 1. Remove the Slot 0 card co ver . W ith the card cov er opened part way , carefully raise it so the cov er’ s hooks come out of the holes in the Pocket PC T erminal, and then remove the co ver . 2. Insert the Laser Scanner Card into the Pocket PC T erminal. 3. Use the silver scre ws to secur e the Laser Scann ...
-
Casio IT-700/70 - page 58
56 5. Install the screw co vers a sho wn in the illustration. • T o remo ve the scre w cov ers, insert a flat blade screwdri ver a t the locations indicated by arrows in the illustration. Reading Bar Codes CASIO provides a library of functions to control the laser scanner . Software de velopers can use these functions to incorporate bar code lase ...
-
Casio IT-700/70 - page 59
57 Important • If you hav e a problem reading a bar code, try changing the angle of the label or Pocket PC T erminal, or the distance between them. • The laser scanner can read bar codes from a distance of 60 to 420 mm under the conditions described belo w . Required Reading Conditions: Ambient Illumination: 500 to 900 lux (fluorescent lighting ...
-
Casio IT-700/70 - page 60
58 Margin Margin Correct Correct Correct Wrong Wrong W rong Bar Code Scanning Positions Locate the bar code reader close to the bar code when the bar code is small. For lar ger bar codes, move the bar code reader fur ther away so the beam can co ver the entire bar code. W arning • Nev er allo w the laser beam to shine directly into your eyes or t ...
-
Casio IT-700/70 - page 61
59 Laser Scanner Card Specifications Model: DT -5057CBCR Readable Bar Codes: J AN, EAN, UPC, NW -7, CODE39, ITF , CODE93, CODE128, MSI, IA T A, Industrial 2 of 5 Readable Distance: 60 to 420mm (with protectiv e cover installed) Interface: CompactFlash Card T ype II (3.3V) Consumption Current: Approximately 140mA Operating T emperature: – 5 to 50 ...
-
Casio IT-700/70 - page 62
60 Using a Rechargeable Battery Pack T wo types Recharg eable Battery Packs are a vailable. Y ou can select the type you need to suit the amount of time you need to run the Pocket PC T erminal, and the operating en vironment (options, etc.) When using the Large-capacity Rechar geable Battery Pack, you must change the battery pack cov er to the larg ...
-
Casio IT-700/70 - page 63
CASIO COMPUTER CO., L TD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan Printed on recycled paper . PN410346-002 MO0101-003002C Printed in Japan ...
Do you have a question concerning Casio IT-700/70?
Use the form below
If you did not solve your problem by using a manual Casio IT-700/70, ask a question using the form below. If a user had a similar problem with Casio IT-700/70 it is likely that he will want to share the way to solve it.