-
Raymarine L365 - page 1
Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. ...
-
Raymarine L365 - page 2
FishFinder L365 Instr uction Manual Raymarine ...
-
Raymarine L365 - page 3
iv Contents Echo sounding – How it works (inside front cov er) FishFinder L365 – Features and functions i For inf ormation and ser vice ii 1 Introduction 1 About the FishFinder L365 1 System Components 2 Standard Equipment 2 Standard T ransducers 2 Optional Accessories 2 2 Installation 4 About the T r ansducer 4 Selecting the Correct T ype of T ...
-
Raymarine L365 - page 4
v FishFinder Page 29 Choosing a F requency 34 Fish Indications 35 Bottom Indications 36 P erfo r mance Modes 37 Zoom Page 38 A-Scope (Bottom Cove rage) Page 40 Digital Page 42 Sidelooker P age 43 4 Setup Instructions 47 The Setup Menu 47 Range Setting 48 Sensitivity Setting 49 Char t Speed Setting 50 Zoom Setting 52 Frequency Setting 53 Resetting t ...
-
Raymarine L365 - page 5
vi List of Figures Figur e Pa ge Unit in Use Inside front cover Front P anel i 1-1 T ypical Installation 1 2-1 T ransducer T ypes 5 2-2 Assembling the T ransducer Bracket 6 2-3 T ransducer Mounted on T r ansom 7 2-4 T ransducer Bracket, Side View 7 2-5 Correct Mounting Position 8 2-6 Mounting the T ransducer 8 2-7 Installing the Sidelooker T ransdu ...
-
Raymarine L365 - page 6
1 1 – Intr oduction About the FishFinder L365 The FishFinder L365 is a system that uses sound waves (“sonar”) to detect fish and show the bottom of a lake or sea. The system includes a transducer and a displa y unit, connected by a cabl e. The tr ansducer sends high-frequency sound wa ves do wn into the water . These sounds strike fish, the b ...
-
Raymarine L365 - page 7
2 Introduction System Components The FishFinder L365 consists of a compact display unit connected to a transducer . The tr ansducer is attached to the boat and extends into the wa te r. Standard Equipment When you unpack your FishFinder L365, you should find the following standard equipment in the carton. If any items are missing, please notify y o ...
-
Raymarine L365 - page 8
3 Description P ar t N o. Sidelooker tr ansom-mount transducer M78930 Sidelooker transducer f or trolling motor mounting. Companion with M78928 downlooker depth/temp transducer , with 12 ft. (3.6 m) cable and hardware M78929 Extension for transducer cable (15 ft, 5 m) M99-140 Extension for transducer cable, for Sidelooker transducer (15 ft, 5 m) M9 ...
-
Raymarine L365 - page 9
4 2 – Installation The installation process has f our par ts: • Mounting the transducer • Mounting the display unit • Connecting the cables for the transducer and power supply • Calibrating the display unit About the T ransducer Se veral diff erent kinds of transducers can be used with this unit. The transom-mount style, used most often, ...
-
Raymarine L365 - page 10
5 M78898 Transom-mount transducer M78923 Thru-hull transducer M99-142 Fairing for thru-hull transducer M78946 In-hull transducer M78930 Sidelooker transducer for transom mount M78929 Sidelooker transducer for trolling motor Installation Fig. 2-1 T r ansducer T ypes Selecting the Cor r ect T ype of T ransducer Before you begin the installation, doub ...
-
Raymarine L365 - page 11
6 Use a trolling motor transducer if – . . . you want to attach the tr ansducer to a trolling motor . (Not recom- mended for deep-water operations.) Use a Sidelooker transducer if – . . . you need a w ay of searching for fish on either side of the boat. This type of transducer is attached to the bracket of the transom-mount transducer or to the ...
-
Raymarine L365 - page 12
7 Fig. 2-3 T r ansducer Mounted on T ransom Installation T ransducer in released position 10" (254 mm) Allow a clearance of at least 10 inches (254 mm) Fig. 2-4 T ransducer Bra cket, Side View propeller from damaging the transducer when it is turned. After installation, check the clearance by turning the wheel so the propeller swings to ward t ...
-
Raymarine L365 - page 13
8 12 3 Inser t screws 1 and 3 1/4" from the bottom of slots, and screw 2 1/4" from the top of the slot to allow room f or adjustment. Correct alignment If screws are inserted this wa y , it won ’ t be possible to mak e the height adjustment. Incorrect alignment Fig. 2-6 Mounting the T ransducer Fig. 2-5 Correct Mounting P osition V er t ...
-
Raymarine L365 - page 14
9 • The brac ket has a quic k-release mechanism. This ma y reduce damage by allowing the transducer to flip up if it hits any debris or the bottom. See Fig. 2-4. Allow enough clear ance abov e the transducer so that it can swing upw ard completely . This is about 10" (254 mm) measured from the bottom of the transom. • If considering the Si ...
-
Raymarine L365 - page 15
10 Installation 6. Attach the brac ket to the hull using the panhead scre ws with flat washers. Before you tighten the screws, apply a good-quality marine sealant to the pilot holes. This will protect the hull from water penetr a- tion. Do not tighten the screws completely yet. 7. Move the bracket up or down so that the leading edge of the trans- d ...
-
Raymarine L365 - page 16
11 Installation 5. Run the Sidelook er cable beside the depth cable f or the transom- mount transducer . Installation Notes – Thr u-Hull T r ansducer Detailed instructions for this installation will be included with the trans- ducer . In this section, we will note just a few important points. 1. Earlier we listed three general rules for placing t ...
-
Raymarine L365 - page 17
12 f ai ring block must be ab le to resist the drag of the water against the hull, and must also be completely waterproof. 6. If the hull of the boat has a core-type hull, you will need to follow some special mounting procedures. The core mater ial must be protected from any water which may leak from the inside of the boat. (If the core material is ...
-
Raymarine L365 - page 18
13 Fig. 2-8 Installing the Sidelook e r T ransducer on a T rolling Motor Installation Notes – T rolling Motor T r ansducer Both Downlooker and Sidelook er transducers may be installed on a trolling motor . See Fig. 2-8. Detailed instructions for these installations will be included with the transducer(s). The Downlook er transducer is mounted on ...
-
Raymarine L365 - page 19
14 Fig. 2-9 Installation on Bra cket Installa tion Notes – T r ansducer for Speed and T emper a tur e Only This type of transducer may be used with a thru-hull transducer which reads depth only . The speed/temperature transducer is attached to the transom of the boat. Detailed instructions for this installation will be included with the transduce ...
-
Raymarine L365 - page 20
15 Fig. 2-10 Dimensions Installation Hole 3/16" (5 mm) 3-29/32"(99 mm) 4-7/32"(107 mm) 63/64" (25 mm) 1-13/32" (36 mm) Countersink 3/8" (10 mm) 5-7/32" (133 mm) 5-9/32" (134 mm) 6-3/4" (172 mm) 4-9/32" (109 mm) 1-3/4" (44 mm) 2-23/32" (69 mm) 2-25/32" (70 mm) 2-21/32" (67 mm) ...
-
Raymarine L365 - page 21
16 4. Slide the displa y unit back into the brac ket. 5. Adjust the display unit f or the best viewing angle . Y ou can tur n the display from side to side, and tilt it up or down. Dismounting the Display Unit See Fig. 2-9. T o release the display from the brack et, press and hold down the left and right sides. Y ou will hear an audible “ clic k, ...
-
Raymarine L365 - page 22
17 Installation 4. Drill the two small holes for the threaded studs as sho wn on the mounting template. Use a 7/32" (5.5 mm) drill bit. 5. Remove the template and draw straight lines between the 1/2" holes. Cut along each of the lines with a small saw . 6. Separate the displa y unit from the mounting brack et. (See Fig. 2-12.) Press the l ...
-
Raymarine L365 - page 23
18 Cable feed-thru cap Cable clamp 1" (25 mm) Hull projections Fiberglass: 1/4" (6mm) Aluminum: 1/2" (13 mm) Fig. 2-13 Installing Cab l e on T ransom Installing the T ransducer Ca ble A 20 foot length of cab le, with the connector attached, is supplied with the transducer . During the installation, do not cut the transducer cab le or ...
-
Raymarine L365 - page 24
19 keep the tr ansducer cable aw ay from the antenna and po wer cables for VHF or FM radios. It is also helpful to keep the transducer cable away from the FishFinder power cable. If it is necessary to run the transducer cable across any wires, make the crossing at a right angle. 3. Be careful not to tear the cable jacket when passing it through bul ...
-
Raymarine L365 - page 25
20 Installing the T ransducer Cab le – Installation with Separate Speed and T emperature Sensors 1. Optional depth - only and speed - and temperature - only transducers are av ailable for the FishFinder L365. In this optional configuration the separate tr ansducers are connected via a “ Y ” type receptacle cable located on the optional speed- ...
-
Raymarine L365 - page 26
21 2. The 5-foot po wer cable (1.5 m) supplied with the displa y unit should reach the source of DC pow er. On a small boat, connect the power leads directly to the main battery isolation switch or breake r. On a larger boat, route the power leads to the DC power distribution panel. 3. It is ve r y impor tant that you connect the power leads correc ...
-
Raymarine L365 - page 27
22 in spite of the longer wire distance. F or runs of 20 to 35 feet (6 to 10.6 m), use #14 A WG. If you e xtend the power wiring, be sure all electrical connections are solid and durable. Soldering is the best way to make these connec- tions. Insulate all connections using heat-shrink tubing or electrical tape. Y ou ma y also use cr imp connectors ...
-
Raymarine L365 - page 28
23 3. If the display unit is reading high or low , you can correct f or this using the entry for “ Speed Cal. ” (T o reach Speed Cal, go to the System Setup display . This is descr ibed in Section 4.) The entr y for Speed Cal is a percentage. An entry of “ 100 ” equals 100%, meaning that there is no correction. If the display unit is produc ...
-
Raymarine L365 - page 29
24 3 – Operating Instr uctions In this section of the manual, w e will explain how to operate the unit. (Setup instructions are included in the next section.) Below is a drawing of the display unit. Controls on Display Unit The FishFinder is designed to be easy to use while the boat is moving. Y ou can steady your hand b y gr ipping the right sid ...
-
Raymarine L365 - page 30
25 Operating Instructions the display will sa y “ Po wer ing Off. ” If you hold the b utton f or more than 3 seconds, the displa y unit will switch off . Page control pad Up and down arrows – ( < and V ) During setup – Use these controls to call up a choice or move to the next line on a menu. If the Zoom display is turned on – If the m ...
-
Raymarine L365 - page 31
26 This unit has a memory for some of the settings – range, sensitivity , zoom, and frequency . (W e will explain these in a moment.) When you tur n off the powe r , any changes y ou make to these settings will be sa ved. Y ou can return all of the settings to the factory default values, and reset the trip log to zero . T o reset the unit, tur n ...
-
Raymarine L365 - page 32
27 Fig. 3-3 Selecting Display P ages Zoom page A-Scope page Sidelooker page Digital page FishFinder page Lamp/Contrast menu Return to FishFinder page Note: This will appear only if the Sidelooker feature is turned on. Operating Instructions ...
-
Raymarine L365 - page 33
28 Adjust contrast Y ou can also adjust the “ contr ast ” of the displa y . This is a measure of how light or dark the display appears. Use the V control to mov e from the line f or “ Lamp On/Off ” to the line fo r “ Contrast. ” Use the < or > controls to adjust the contrast. (The FishFinder unit has a feature which adjusts the co ...
-
Raymarine L365 - page 34
29 FishFinder Page A moment after you first turn on the display unit, the Lamp/Contrast menu disappears. The unit then automatically switches to the FishFinder page. Figure 3-4 shows a typical display . (The FishFinder page is also called the “ char t ” or “ bottom graph ” display .) As time passes, this displa y scrolls from right to left. ...
-
Raymarine L365 - page 35
30 Some of these echoes indicate fish, and others show the bottom. As ne w echoes are receiv ed, the FishFinder “dra ws” a g raph of the bottom. The bottom g raph helps you to tell whether the bottom is rising or falling. It also allo ws you to identify the shape or “structure” of the bottom. This can indicate a reef or shipwreck. Notice th ...
-
Raymarine L365 - page 36
31 Auto z oom on (Z) The “ zoom ” can be used to magnify the image from a small section of the water below the boat. (This is used with the Zoom displa y , which we will describe in a moment.) When the auto zoom feature is on, the FishFinder automatically moves the zoom window up or down to track the bottom. Fish symbol on When the FishFinder s ...
-
Raymarine L365 - page 37
32 W ater temperature This entry shows the current water temperature at the surface of the water . (The reading for water temperature can be helpful for finding fish. A par ticular type of fish will often prefer water in a narrow temperature range.) From the System Setup display , you can turn this item off or change the units used for this display ...
-
Raymarine L365 - page 38
33 Buzzer symbol This symbol shows whether any of the alarms will use the buzze r . There are three kinds of alarms: shallow , deep, and fish. If one of these alarms is set, it will always present a flashing symbol on the display . The Buzz er symbol shows whether the alarms will also use the buzzer . If the Buzzer setting in the System Setup displ ...
-
Raymarine L365 - page 39
34 Before w e explain the other pages, there are some general things y ou should know about the operation of the FishFinder . Choosing a F requency W e said that the FishFinder uses sound wa ves to “ see ” through the water under the boat. The “ frequency ” is a measure of how f ast the sound w aves change or “ vibrate. ” The FishFinder ...
-
Raymarine L365 - page 40
35 Fish Indications Even using adv anced sonar technology , it is sometimes hard to detect a fish in the water . The body of a fish is just a little more dense than the surrounding water . There is really nothing very solid for the sound wa ves to bounce off of. The FishFinder L365 is very good at telling the difference between a fish and the surro ...
-
Raymarine L365 - page 41
36 Operating Instructions A shallow arch or horizontal line is generated when the boat is moving slowly or stopped. An arch-shaped image indicates a fish. This indicates a group of small fish. This shows a fish detected in sidelooker mode. When the boat is moving very fast, a fish appears as a single vertical line. The same fish appears differently ...
-
Raymarine L365 - page 42
37 Hard (Sand) Rocks Soft (Mud) Fig. 3-6 Bottom Conditions Operating Instructions Notice that the low er layer of the bottom is sho wn as a solid display . This indicates a weaker echo. Sometimes this means that the upper layer of the bottom is soft. Some of the sound waves may reach through this lay er, and ma y be reflected by a more solid la yer ...
-
Raymarine L365 - page 43
38 Zoom Page Operating Instructions T op of zoom area Zoom display (magnified) Normal display Bottom of zoom area Zoom magnification Line indicates zoom area Fig. 3-7 Zoom P age The Zoom page giv es you a wa y of enlarging or magnifying a par t of the display area. See Fig. 3-7. (The “ zoomed ” display is actually larger only in the ve r tical ...
-
Raymarine L365 - page 44
39 Zoom magnification This indicates the amount of “ zoom ” or magnification. Y ou alwa ys set the amount of zoom manually , using one of the functions on the Setup display . Y ou can choose an x2 view (double the normal display size), x4, x6 or x8 in the series of setup screens. See Section 4. Y ou must also select the area or “ window ” o ...
-
Raymarine L365 - page 45
40 Operating Instructions A-Scope image (real time image) Fish indication A-Scope display Normal display Bottom coverage Fig. 3-8 A-Scope P age A-Scope (Bottom Co v er age) P a ge On the FishFinder display the bottom graph is “ drawn ” after the FishFinder receiv es sev eral echoes . This has the effect of sho wing a record of the bottom contou ...
-
Raymarine L365 - page 46
41 A-Scope image This shows the beam of sound waves extending down from the boat, and spreading as it mov es through the water . Any fish or objects which are positioned under the boat will appear on the display . This is a “ real time ” display , so you can see the fish symbols moving as the fish swim under the boat. Bottom coverage This shows ...
-
Raymarine L365 - page 47
42 Digital Page Depth Speed Distance/log W ater temperature Alarms Fig. 3-9 Digital P age Operating Instructions Press The Digital page presents some useful inf o rmation in large numbers on the displa y . See Fig. 3-9. This displa y is useful when you are tra veling, b ut not looking for fish or checking the appear ance of the bottom. There are fo ...
-
Raymarine L365 - page 48
43 Sidelooker P age This f eature will only work if an optional Sidelooker transducer has been installed, and if the Sidelooker feature has been turned on in the System Setup Menu. The Sidelooker f eature is very helpful for cer tain kinds of fishing. It allows you to check for underwater structure along the sides of a stream or r iv er, under the ...
-
Raymarine L365 - page 49
44 Boat symbol Depth below boat Centerline Fish echo mark Log/distance Fig. 3-11 Sidelook e r P age The Sidelooker P age, lik e the FishFinder Page, displa ys a graph or char t. The scrolling ve r tical dashed line represents the centerline of the boat. As new Sidelooker echoes are received, the new information appears at the top of the displa y , ...
-
Raymarine L365 - page 50
45 feature is on, the y will be indicated by solid fish symbols . (Y ou can turn the Fish Symbol f eature on or off from the System Setup Menu. See Section 4.) Underwater objects such as submerged tree stumps or rocks can also be detected by the Sidelook er transducer . These objects usually appear as thick er ver tical targets. The Sidelook er sou ...
-
Raymarine L365 - page 51
46 The units used here are chosen using the entr y for Depth Units in the System Setup Menu. If you have selected feet (FT) or fathoms (F A), the distance shown here will be measured in feet. If you have selected meters (M), the distance shown here will be in meters. Bottom/Shore Indication This indicates the area where the transducer beam is start ...
-
Raymarine L365 - page 52
47 4 – Setup Instr uctions The Setup Menu Press the Setup button to enter the Setup Men u. T o move from one display to another , press the V and < arrows of the P age control pad. T o return to the nor mal display , press CLEAR . See Fig. 4-1. This means that you can reach these displa ys quickly , mak e a change, then return to the normal di ...
-
Raymarine L365 - page 53
48 Range Setting Fig. 4-2 Range Settings Setup Instructions If you press SETUP once, the first menu item allo ws you to set the range. See Fig. 4-2. The range sets the maximum depth the unit will be able to see . Use the < and > arrows of the Page control pad to select A uto or Manual range. (If you press SETUP while you are looking at the Si ...
-
Raymarine L365 - page 54
49 Sensitivity Setting Setup Instructions Fig. 4-3 Sensitivity Setting The sensitivity adjusts the ability of the unit to tell the differences betw een echoes of diff erent strengths. In general, the sensitivity should be as high as possible, to detect the fish and show the detail on the bottom. How- ev er, if the sensitivity is too high, the unit ...
-
Raymarine L365 - page 55
50 then use the < and > arrows of the P age control pad to fine- tune the setting. When the FishFinder is turned off, then on again, the Auto sensitivity setting returns to the nor mal default setting.) Man ual sensitivity Y ou can also set the sensitivity manually . If the amount of background noise changes, the FishFinder will not adjust fo ...
-
Raymarine L365 - page 56
51 Figure 4-4 shows ho w the char t speed setting affects the display . In both cases, the unit is sho wing the same section of the bottom. Using a f aster chart speed, the display has more space on the display to sho w this section, so it can include more detail. Using a slower char t speed, this same info r mation is display ed in a smaller horiz ...
-
Raymarine L365 - page 57
52 Zoom Setting Fig. 4-6 Zoom Settings Setup Instructions The “ Zoom ” feature allows y ou to enlarge or magnify a section of the nor mal display . This lets y ou see a “ window ” of the echosounder view in detail. The Zoom window may be set for f our different lev els of magnifica- tion. Y ou can choose settings for x2, x4, x6 or x8 magnif ...
-
Raymarine L365 - page 58
53 display , and you are looking at the Zoom displa y itself. Y ou can manually mov e the Zoom area up or down b y pressing the < and V arrows of the P age control page. The location of the zoom area is shown b y the dark ver tical line at the ve r y r ight-hand edge of the displa y . If you are done with your setup changes , press the CLEAR but ...
-
Raymarine L365 - page 59
54 • 50 kHz dual frequency – The unit will use both frequencies, but the image on the display will be generated using the information from the wider 50 kHz beam. If you are using one of the dual frequency choices, some of the fish may be re vealed by one beam, b ut not the other . If a fish is detected by the narrow 200 kHz beam, the symbol for ...
-
Raymarine L365 - page 60
55 System Setup Display Y ou can reach the System Setup displa y at any time by pressing the Setup button twice . This means that y ou can reach this display , make a change, then return to the nor mal display quic kly . See Fig. 4-9. Figure 4-10 shows the items in this display . Fig. 4-9 Reaching the System Setup Display Fig. 4-10 System Setup Dis ...
-
Raymarine L365 - page 61
56 T o change one of the items, use the < and V arrows of the P age control pad to mo ve up or down in the displa y . This will highlight an area on the displa y where the unit is ready to make a change. (This is lik e the “ cursor ” on a computer .) Once you ha ve mo ved to the correct line , press the < or > arrows of the P age contr ...
-
Raymarine L365 - page 62
57 transducer , use this line of the display to turn on the Sidelooker mode. Speed Cal This unit can detect and display the speed of the boat through the water . It also uses the speed infor mation to calculate the distance trav eled (the “log” ). The item for Speed Cal allows you to adjust the speed reading to make it match your actual speed t ...
-
Raymarine L365 - page 63
58 When the shallow alarm is set, the letter “S” will appear in the lower left-hand corner of the normal displays. If you move into shallow water and trigger the alarm, the letter “S” will begin to flash, and the buzzer will sound. Press the CLEAR button to silence the buzz er . The letter “S” will continue to flash until you mo ve into ...
-
Raymarine L365 - page 64
59 silence the buzzer f or the current alarm condition . The “S” or “D” symbol will continue to flash as long as the alarm condition is still present. If the alarm condition occurs again, the buzzer will sound again. (For example, this would happen if, after a shallow alarm you mov e into deep water , then retur n to shallow w a ter .) Y ou ...
-
Raymarine L365 - page 65
60 T emp Units This item sets the units used by the temperature displa y . Y ou can choose F ahrenheit degrees ( ° F) or Celsius degrees (° C). Use the < and > controls to make your choice. Speed A s peed indication appears on all of the nor mal displa ys. If you do not want to see this item, y ou can tur n it off using this line of the Sys ...
-
Raymarine L365 - page 66
61 Setup Instructions Fig. 4-11 Sidelook e r Range Settings Next, press the > arrow of the P age control pad until you see the Sidelooker page. The next job is to set up the range, sensitivity , and char t speed f or the Sidelooker feature. While the unit is displaying the Sidelooker page, press the SETUP button once . The setup menu for the Sid ...
-
Raymarine L365 - page 67
62 This menu item allows you to set the sensitivity for the Sidelooker feature only . (This will not change the sensitivity setting f or the other display pages.) Choose A uto or Manual sensitivity . If you choose Manual sensitivity , use the < and > arrows of the P age control pad to adjust the sensitivity . At this point, you can press the ...
-
Raymarine L365 - page 68
63 Default Settings When the FishFinder is new , it uses a number of preset “ def ault ” settings. Here is a list: Function De f ault - US model Default - Eur ope model Range Au to A uto Sensitivity Aut o Au to Char t Speed 3 (fast) 3 (fast) Zoom Auto/x4 Auto/x4 F requency Dual 200 kHz Dual 200 kHz Simulator O f f O f f Fish symbols O n O n Whi ...
-
Raymarine L365 - page 69
64 5 – Maintenance and T r oubleshooting P eriodically check the displa y unit, cable, and tr ansducer . Be sure all components are free of corrosion and are securely mounted. Check all cables for signs of chafing or abrasion. Be sure all of the connections to the boat ’ s DC power and g round system are clean and tight. Cleaning Instructions A ...
-
Raymarine L365 - page 70
65 the factory defaults. See the def ault settings on page 63. 2. If the power wiring includes a fuse, it ma y be bl own. Also chec k the circuit breaker or main battery switch. 3. Y ou may hav e rev ersed the pow er connections. Follow the DC po wer lines all the wa y back to the batter y . The red wire should connect to the positive terminal (+) ...
-
Raymarine L365 - page 71
66 4. The tr ansducer cable ma y be damaged. Check f or any point where the wiring may be pinched or bent. Look for signs that water has gotten into the cable. If the tr ansducer cable is damaged, the transducer and cab le should be replaced as a unit. Contact Ra ymar ine for instructions. The display unit does not see the bottom or fish – 1. Be ...
-
Raymarine L365 - page 72
67 The FishFinder does not display fish ar ches – 1. Be sure the Fish Symbol feature is turned off. See the instructions f or the System Setup display . 2. The FishFinder will not display arches unless the boat is moving. If the boat is stopped, fish will appear on the display as straight lines. 3. The transducer may not be aimed straight down. I ...
-
Raymarine L365 - page 73
68 The speed or log readings are wrong – 1. The paddle wheel on the transducer may be fouled. Clean the parts as described in the section on “Cleaning Instructions.” 2. Check the speed calibration. Use the item for “Speed Cal” on the System Setup display . See the instr uctions in Section 2. Ser vicing a T hr u-Hull T r ansducer If your b ...
-
Raymarine L365 - page 74
69 For technical suppor t Please call 1-800-539-5539, extension 244 4 or (603) 881-5200, e xtension 24 44. The Ra ymarine F ax n umber is 1-603-634-4756. Our T echnical Suppor t Specialists are av ailable to ans we r questions about installing, operating, and troubleshooting all Ra ymar ine products. Ques- tions may be addressed directly to our T e ...
-
Raymarine L365 - page 75
70 Raymarine in Eur ope In Europe , suppor t, ser vice, and accessories are av ailable from: Ra ymar ine Limited Anchorage P ark, P or tsmouth Hampshire PO3, 5TD , England T el : +44 (0) 23 9269 3611 F ax: +44 (0) 23 9269 4642 T echnical support is available via the Internet. Questions may be sent directly to this address: techsupport@ra ymar ine . ...
-
Raymarine L365 - page 76
71 Maintenance and T roub leshooting ...
-
Raymarine L365 - page 77
72 6 – Specifica tions General Information Display panel FSTN high-contrast LCD Panel dimensions 3.6" H (61 mm) x 2.4" W (91 mm) No. of dots 240 x 64 LCD contrast Adjustable, with temperature compensation Backlight LCD panel, on/off Operating modes FishFinder mode (standard mode) Zoom mode A-Scope mode Digital mode Sidelooker mode Keys ...
-
Raymarine L365 - page 78
73 FishFinder Functions Range A uto or manual FT (f eet) 5 10 20 30 50 80 100 150 250 400 600 10 00 1500 2000 F A (fathoms) 2 3 5 10 15 20 25 30 50 80 100 150 200 350 M (meters) 2 5 10 15 20 25 30 50 80 120 200 300 500 650 Zoom size x2, x4, x6, x8 Chart speed F reeze, slow , medium, fast White line On/ Off Alarms Shallow , deep, fish Reset distance ...
-
Raymarine L365 - page 79
74 Connector Diagr ams Specifications 12 1 2 3 4 5 6 7 8 9 Pin 1 Ground (-) Pin 2 12V DC (+) DC power connector Pin 1 Depth TX+ Pin 2 Depth TX- Pin 3 L Select Pin 4 Temp Pin 5 R Select Pin 6 Speed signal/voltage + Pin 7 Shield ground Pin 8 +12V (sidelooker) Pin 9 L/R receive Transducer connector (Connectors viewed looking toward rear of display uni ...
-
Raymarine L365 - page 80
75 Glossar y of T er m s Glossar y Aft : Near or tow ard the rear par t of the boat (nautical ter m). Bac kground noise: F alse or meaningless echo returns produced by bubbles, water turbulence, or debris Bow: The front of the boat (nautical ter m). Cavitation: Air bu b bles in the water which aff ect the readings of a transducer . These are normal ...
-
Raymarine L365 - page 81
76 Knot: One nautical mile per hour (1.15 statute miles per hour). LCD: “ Liquid Crystal Displa y ” - A technology used to produce flat-panel displays. Nautical mile: 6076 feet Port: Left side of the boat, when facing the bow (nautical term). PVDF: “ Poly Vinylidene Fluoride ” – A unique polymer plastic that has the ability to conv er t s ...
-
Raymarine L365 - page 82
Limited W ar r anty Certificate Raymarine warrants each new Light Marine/Dealer Distributor Product to be of good materials and workmanship, and will repair or exchange any parts proven to be defective in material and workmanship under normal use for a period of 2 years/24 months from date of sale to end user, except as provided below . Defects wil ...
-
Raymarine L365 - page 83
Factory Service Centers United States of America UK, Europe, Middle East, F ar East Raym ari ne ,I nc. Raymarine Ltd 22 Cotton Road, Unit D Anchorage park, Portsmouth Nashua, NH 03063-4219 USA PO3 5TD , England T elephone: +1 603 881 5200 T elephone: +44 (0)23 9269 3611 F ax: +1 603 864 4756 F ax: +44 (0)23 9269 4642 www .raymarine.com www .raymari ...
Do you have a question concerning Raymarine L365?
Use the form below
If you did not solve your problem by using a manual Raymarine L365, ask a question using the form below. If a user had a similar problem with Raymarine L365 it is likely that he will want to share the way to solve it.