-
Atek electronic Super MiniTM - page 1
User’s Manual for Super Mini ™ Optical Mouse ...
-
Atek electronic Super MiniTM - page 2
TABLE OF CONTENTS Introduction 2 Important Safety & Health Information 3 Features & Specifications 4 Compatibil ity & System Requirements 5 Installation 6 Troubleshooting 8 Service & Support 10 One Year Limited Warranty 11 Regulatory Information 13 Purchase Record & Contact Information 14 1 ...
-
Atek electronic Super MiniTM - page 3
INTRODUCTION Thank you for purchasing an Atek Super Mini™ Optical Mouse. Please also try other Atek laptop accessories, inc luding Tote - Remote ® remote controls for laptop presentations and replacement PCMCIA dongles and cables for PC cards. If you have difficulty installing or using your Super Mini™ Optical Mouse, please first contact your ...
-
Atek electronic Super MiniTM - page 4
IMPORTANT SAFETY & HEALTH INFORMATION WARNING : Do not shine the optical sensor on the bottom of the mouse into your eyes! Frequent use of a computer mouse may cause physical injury. If you feel any pain, discomfort, numbness, tingling, aching, cram ping, stiffness or swelling in your hands, wrists, arms, shoulders, neck, back, or fingers, you ...
-
Atek electronic Super MiniTM - page 5
FEATURES & SPECIFICATIONS • Atek’s optical technology records approximately 1,500 motions per second, providing smoother, more precise operation than traditional computer mouse technology. With an optical mou se, your cursor generally will not stick, skip, or jump. • Your Super Mini™ Optical Mouse can be used on almost any relatively fl ...
-
Atek electronic Super MiniTM - page 6
COMPATIBILITY & SYSTEM REQUIREMENTS The Atek Super Mini™ Optical Mouse comes with a USB connector and a USB - PS/2 adapter. You can use the Super Mini™ Optical Mouse with Windows XP ®, Windows 2000®, Windows NT ® , Windows Me®, Windows 98®, Windows 95 ® , Window s CE®, Macintosh® 8.6 or later , and Linux ® , operating systems, with ...
-
Atek electronic Super MiniTM - page 7
INSTALLATION • If you are using the USB port, it is not necessary to turn off your computer before plugging the mouse into the USB port on your computer or into a U SB hub. If you are using the PS/2 port, you must first shut down your operating system and turn off your computer before plugging the mouse into the PS/2 port on your computer. Also m ...
-
Atek electronic Super MiniTM - page 8
• If you want to use the USB connector but the USB port on your computer is already occupied, you can use the mouse with most USB hub s. W hen using a hub, if the mouse sometimes does not work, try unplugging and plugging back in the mouse and/or the hub . • Make sure your workspace is “ergonomically” correct as per the Important Safety &am ...
-
Atek electronic Super MiniTM - page 9
TROUBLESHOOTING If your Super Mini ™ Optical Mouse does not work, it is important to determine whether the problem is the mouse or the computer. Always try the mouse on another computer before concluding that the mouse is “defective”. Mouse Not Det ected • Make sure your computer ports are properly set up (for example, not disabled). Check ...
-
Atek electronic Super MiniTM - page 10
Cursor Does Not Move At All • The mouse may not have been detected by your computer (see “Mouse Not Detected” above). • The o ptical sensor may be blocked (see “Cursor Jumps or Sticks” below). • You may be using the mouse on an incompatible surface. Make sure you are not using your mouse on a transparent surface like glass or a reflec ...
-
Atek electronic Super MiniTM - page 11
SERVICE & SUPPORT If you have difficulty installing or using your Super Mini ™ Optical Mouse, please first read the Troublesho oting section of this User’s Manual on Page 8 and check our website at www.atek.com for updated support information. It is also always a good idea to contact your computer dealer or manufacturer for assistance , esp ...
-
Atek electronic Super MiniTM - page 12
ONE YEAR LIMITED WARRANTY Please register your new S uper Mini™ Optical Mouse online using our warranty registration form at: www.atek.com The following limited warranty applies only to the United States and Canada: Warranty : Atek , Inc. warrants this Atek product to the original purchaser to be free from relevant defects in material and workman ...
-
Atek electronic Super MiniTM - page 13
product after 1) you call us to obtain a Return Merchandise Authorization (RMA) number, 2) you return it to us freight prepai d at the address listed in this User’s Manual, 3) we have determined that it contains relevant defects in material or workmansh ip at the time of purchase , and 4) you have provided a receipt as proof of purchase date. The ...
-
Atek electronic Super MiniTM - page 14
REGULATORY INFORMATION FCC Statement This product has been tested and found to comply with Part 15 of the FCC Rules. Operat ion is subject to the following conditions: it may not cause harmful interference and must accept any interference received, inc luding interference that may cause undesired operation. Canada Statement This Class B digital app ...
-
Atek electronic Super MiniTM - page 15
PURCHASE RECORD & CONTACT INFORMATION Models: ACC - MS15000 / MS102 / MS103 Serial #: _______________ Place of Purchase: _____ _________________________ Date of Purchase: _______________ PLEASE SAVE YOUR RECEIPT AS PROOF OF PU R CHASE DATE FOR WARRANTY PURPOSES. Atek , Inc. 2911 Tech Center Dr. Santa Ana , CA 927 05 Tel: 714 - 258 - 01 00 1 - 8 ...
-
Atek electronic Super MiniTM - page 16
Super Mini Optical Mouse User’s Manual Rev. 4 ...
Do you have a question concerning Atek electronic Super MiniTM?
Use the form below
If you did not solve your problem by using a manual Atek electronic Super MiniTM, ask a question using the form below. If a user had a similar problem with Atek electronic Super MiniTM it is likely that he will want to share the way to solve it.