English dropdown-ico

Manual BOXLIGHT Matinee 1HD

52 pages 0.89 mb
Download

Go to site of 52

Summary
  • BOXLIGHT Matinee 1HD - page 1

    Matinee 1HD HOME THEA TER PR OJECT OR USER'S GUIDE ...

  • BOXLIGHT Matinee 1HD - page 2

    2 T able of Contents T able of Contents 2 P ar t Names and Functions 9 Video Input 24 Computer Input / (RGB Scart 21-Pin Video Input) 31 Setting 42 Appendix 44 T o the Owner 3 Feature and Design 8 Front 9 Bottom 10 Back 10 Terminal 11 Top Controls and Indicators 12 Remote Control 13 Remote Control Batteries Installation 14 Operating Range 14 Input ...

  • BOXLIGHT Matinee 1HD - page 3

    3 C AU TI O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT ...

  • BOXLIGHT Matinee 1HD - page 4

    4 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m ...

  • BOXLIGHT Matinee 1HD - page 5

    5 Safety Instructions CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to ...

  • BOXLIGHT Matinee 1HD - page 6

    6 Compliance The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. A C P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has ...

  • BOXLIGHT Matinee 1HD - page 7

    7 Compliance This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized ...

  • BOXLIGHT Matinee 1HD - page 8

    8 Feature and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and comp ...

  • BOXLIGHT Matinee 1HD - page 9

    9 Part Names and Functions Front PROJECTION LENS FRONT COVER INFRARED REMOTE RECEIVER TOP CONTROLS AND INDICATORS AIR INTAKE VENTS EXHAUST VENTS FOCUS RING ZOOM LEVER LENS SHIFT RING (LEFT/RIGHT) LENS SHIFT RING (UP/DOWN) CA UTION This projector is equipped with Cooling Fans for protection from overheating. Pay attention to the following to ensure ...

  • BOXLIGHT Matinee 1HD - page 10

    10 Part Names and Functions Bottom Back CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable objects near these vents. ● Keep front grills at least 3’(1m) away from any objects, especially heat-sensitive objects. ● Do not touch this ...

  • BOXLIGHT Matinee 1HD - page 11

    11 Part Names and Functions Connect the S-VIDEO output from video equipment to this jack. (Refer to page 17.) S-VIDEO INPUT JACK Connect the computer output to this jack. (Refer to page 18.) COMPUTER INPUT TERMINAL * SERVICE PORT JACK This jack is used to service the projector. Connect the composite video output from video equipment to VIDEO jack. ...

  • BOXLIGHT Matinee 1HD - page 12

    12 W ARNING TEMP . LAMP REPLACE READ Y LAMP MENU INPUT ON-OFF SELECT Part Names and Functions Used to open or close the on-screen menu. (p22) MENU BUTTON READY INDICATOR SELECT BUTTON POWER ON–OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT BUTTONS LAMP REPLACE INDICATOR Lights green when the projector is ready to be turned o ...

  • BOXLIGHT Matinee 1HD - page 13

    13 ON-OFF KEYSTONE MENU SCREEN AUT O PC ADJ. AU TO NO SHOW IMA GE INPUT LIGHT SELECT 1 2 3 4 IMA GE AUT O VIDEO S-VIDEO COMPO COMPONENT VIDEO Part Names and Functions AUTO PC ADJ. BUTTON Used to operate Auto PC Adjustment function. (p34) IMAGE BUTTON Used to select image level. (p27, 38) Used to select input source. (p24, 31) POWER ON-OFF BUTTON Us ...

  • BOXLIGHT Matinee 1HD - page 14

    14 Part Names and Functions To insure safe operation, please observe the following precautions: ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture, or heat. ● Do no ...

  • BOXLIGHT Matinee 1HD - page 15

    15 Installation P ositioning the Projector Tilting the Pr ojector Picture tilt and projection angle can be adjusted by rotating the Adjustable feet. Projection angle can be adjusted up to 11.8 degrees with the Adjustable feet. Lift the front of the projector and pull the Feet lock latches on both sides of the projector. 1 ADJUSTABLE FEET FEET LOCK ...

  • BOXLIGHT Matinee 1HD - page 16

    16 Installation The Projection lens can be moved up and down with manual lens shift function. This function makes it easy to provide a projected image where you want. U/D ratio can be adjusted from 10 : 0 ~ 0 : 10 (refer to the figures below). Mo ving the Lens UPPERMOST LENS SHIFT RING (LEFT/RIGHT) Turn the lens shift ring (left/right) left/right t ...

  • BOXLIGHT Matinee 1HD - page 17

    17 Installation Video Source (example) Video Cassette Recorder Video Disc Player Video Cable (RCA x 1) S-VIDEO Cable Terminals of the Projector NOTE When selecting the video input with the "AUTO" on the remote control or through menu operation, the projector selects connection in the following order: 1st Y-Pb/Cb-Pr/Cr 2nd S-VIDEO 3rd VIDE ...

  • BOXLIGHT Matinee 1HD - page 18

    18 Installation ON 1 DIP ON OFF 2 3 4 5 6 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 3 4 5 6 OFF OFF ON ON ON ON 21" MODE (1152 x 870) IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) VGA Cable ✽ Monitor Output Desk ...

  • BOXLIGHT Matinee 1HD - page 19

    19 T urning On the Projector Connect the projector's AC Power Cord into an AC outlet, and open the front cover. Turn the MAIN ON/OFF switch on. The LAMP indicator lights red, and the READY indicator lights green. The READY indicator does not light green with the front cover closed. Press the POWER ON-OFF button on the top control or on the rem ...

  • BOXLIGHT Matinee 1HD - page 20

    20 Basic Operation Zoom Adjustment Focus Adjustment Move the ZOOM LEVER upward to make the image larger. Move the ZOOM LEVER downward to make the image smaller. Rotate the FOCUS RING to adjust the image focus. FOCUS RING WIDE TELE ZOOM LEVER ...

  • BOXLIGHT Matinee 1HD - page 21

    21 Basic Operation Ke ystone Adjustment 1 Press the KEYSTONE ▲ / ▼ button on the remote control or select the Keystone in the Setting menu. (Refer to page 42.) The Keystone dialog box appears. 2 Correct keystone distortion by pressing the KEYSTONE ▲ / ▼ button or the POINT UP/DOWN button. Press the KEYSTONE ▲ button or the POINT UP button ...

  • BOXLIGHT Matinee 1HD - page 22

    22 Basic Operation On-Screen Menu MENU POINT RIGHT BUTTON ITEM Display the on-screen menu by pressing the MENU button on the top control or the remote control. A main menu appears. 1 Main menu Select an item by pressing the POINT UP/DOWN button, and activate the item that you have selected by the , , or button. Select a menu from the main menu by p ...

  • BOXLIGHT Matinee 1HD - page 23

    23 Basic Operation Contents of Menus VIDEO MENUS COMPUTER MENUS INPUT SOURCE SELECTION: select input source either Video [Auto, Video, S-Video, (Y-Pb/Cb-Pr/Cr)] or Computer. (Refer to page 24, 25.) VIDEO SYSTEM SELECTION: select Video system from AUTO, PAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N, 1080i, 1035i, 720p, 575p, 480p, 575i, 480i. (Refer to p ...

  • BOXLIGHT Matinee 1HD - page 24

    24 V ideo Input Input Sour ce Selection (Direct Operation) You can select Video input or Computer input with the INPUT button. (The input source that was selected last is selected when the projector is turned on.) If the projector cannot reproduce proper video source, select correct input source through menu operation on the next page. INPUT button ...

  • BOXLIGHT Matinee 1HD - page 25

    25 Video Input Input Sour ce Selection (Menu Operation) Press the MENU button, and the main menu appears. Select the Input Source Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Choose Video with the POINT UP/DOWN button and press the POINT RIGHT button. The source selection menu appears. 1 ...

  • BOXLIGHT Matinee 1HD - page 26

    26 Video input Video System Selection menu (VIDEO / S-VIDEO) Press the MENU button, and the main menu appears. Select the Video System Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Choose the system that you want to select with the POINT UP/DOWN button, and then press the SELECT button to ...

  • BOXLIGHT Matinee 1HD - page 27

    27 Video Input Image Level Selection (Men u Operation) Press the MENU button, and the main menu appears. Select the Image Level Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the level that you want to set with the POINT UP/DOWN button, and then press the SELECT button to activa ...

  • BOXLIGHT Matinee 1HD - page 28

    28 Video Input Press the MENU button, and the main menu appears. Select the Image Level Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the item that you want to adjust with the POINT UP/DOWN button, and then press the POINT LEFT/RIGHT button to adjust each item. The items displ ...

  • BOXLIGHT Matinee 1HD - page 29

    29 Video Input Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.) Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter. (From 0 to 63.) Contrast Brightness Press the POINT LEFT button or the POINT RIGHT button to obtain better balance of ...

  • BOXLIGHT Matinee 1HD - page 30

    30 Video Input This projector has a picture screen resize function, which enables you to display the desirable image size. NOTE : The Screen Size Adjustment cannot be operated when “ 720p, ” “ 1035i, ” or “ 1080i ” is selected in the Video System Selection menu (p26). Provides an image to fit screen size (16 : 9 aspect ratio) by expandi ...

  • BOXLIGHT Matinee 1HD - page 31

    31 Computer Input / (RGB Scart 21-Pin Video Input) Input Sour ce Selection (Menu Operation) Press the MENU button, and the main menu appears. Select the Input Source Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. Choose Computer with the POINT UP/DOWN button and press the POINT RIGHT butto ...

  • BOXLIGHT Matinee 1HD - page 32

    32 Computer Input This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA in most cases (refer to “ Compatible Computer System ” on the next page). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special settings. The projector ...

  • BOXLIGHT Matinee 1HD - page 33

    33 Computer Input Compatible Computer System Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 7 ...

  • BOXLIGHT Matinee 1HD - page 34

    34 Computer Input Computer Adjustment (A uto) (Menu Operation) The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. The Auto PC Adjustment function can be operated as follows. Press the MENU button, and the main menu appears. Select the Computer Adjustment m ...

  • BOXLIGHT Matinee 1HD - page 35

    35 Computer Input Computer Adjustment (Manual) This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi- Scan system of this projector. If this happens, the projector ...

  • BOXLIGHT Matinee 1HD - page 36

    36 Computer Input To store adjustment data. To clear adjustment data. Choose one of the positions from the Mode 1 to 5 where you want to store with the POINT UP/DOWN button, and press the SELECT button. Select "Yes" with the SELECT button and close the menu by pressing the SELECT button at the Quit. 4 Adjust an image as necessary to elimi ...

  • BOXLIGHT Matinee 1HD - page 37

    37 Computer Input Adjustment of horizontal area displayed by the projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image. Display area H Adjustment of vertical area displayed by the projector. Press the POINT LEFT/RIGHT button to decrease/increase value to match the resolution of image. Display area ...

  • BOXLIGHT Matinee 1HD - page 38

    38 Computer Input Image Level Selection (Men u Operation) Press the MENU button, and the main menu appears. Select the Image Level Selection menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the level that you want to set with the POINT UP/DOWN button, and then press the SELECT button to act ...

  • BOXLIGHT Matinee 1HD - page 39

    39 Computer Input Press the MENU button, and the main menu appears. Select the Image Level Adjustment menu with the POINT UP/DOWN button, and then press the POINT RIGHT button to enter the sub-menu. 1 2 Choose the item that you want to adjust with the POINT UP/DOWN button, and then press the POINT LEFT/RIGHT button to adjust each item. The items di ...

  • BOXLIGHT Matinee 1HD - page 40

    40 Computer Input Press the POINT LEFT button to decrease contrast and the POINT RIGHT button to increase contrast. (From 0 to 63.) Press the POINT LEFT button to adjust image darker and the POINT RIGHT button to adjust image brighter. (From 0 to 63.) Contrast Brightness Press the POINT LEFT button or the POINT RIGHT button to obtain better balance ...

  • BOXLIGHT Matinee 1HD - page 41

    41 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. When Digital zoom is selected, the on-screen menu disappears and the message “ D.Zoom ” is displayed. Press the SELECT button to expand the image. And press the POINT UP/DOWN/LEFT/RIGHT button(s) to pan the image. The pa ...

  • BOXLIGHT Matinee 1HD - page 42

    42 SETTING Keystone When the image is distorted vertically, select the Keystone. The on- screen menu disappears and the Keystone dialog box is displayed. Correct keystone distortion by pressing the POINT UP/DOWN button. Refer to Keystone Adjustment on page 21. Language Language is selectable from English, German, French, Italian, Spanish, Portugues ...

  • BOXLIGHT Matinee 1HD - page 43

    43 Setting This function turns the Projection lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the lamp lifetime. (This projector is shipped with this function ON.) This function operates as follows; Power management This function is used to reset the Lam ...

  • BOXLIGHT Matinee 1HD - page 44

    44 Appendix Lamp Replacement When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through Boxlight at 1-800-762-5757 or 360-779-7901. ● Model No. of y our projec ...

  • BOXLIGHT Matinee 1HD - page 45

    45 Appendix Lamp Replace Counter Be sure to reset the Lamp Replace Counter after the Lamp assembly is replaced. After the Lamp Replace Counter is reset, the LAMP REPLACE indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter before the Projection lamp is replaced. Turn on the projector and press the MENU button. The main menu appear ...

  • BOXLIGHT Matinee 1HD - page 46

    46 Appendix Cleaning the Pr ojection Lens Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, close the front cover. 1 3 Lightly wipe the Projection lens with a cleaning clot ...

  • BOXLIGHT Matinee 1HD - page 47

    47 Appendix Before calling your dealer or service center for assistance, check the following: • Make sure you have connected the projector to video equipment or your computer as described on page 17 and 18. • Check cable connection. Verify that all video, computer, and power cord are properly connected. • Verify that all power is switched on. ...

  • BOXLIGHT Matinee 1HD - page 48

    48 Appendix If the problem still persists after following all operating instructions, contact the dealer where you purchased the projector or the service center. Give the model number and explain the difficulty. We will advise you how to obtain service. LAMP The projector is OFF. READY The projector is READY to be turned on. WARNING TEMP. (page 46) ...

  • BOXLIGHT Matinee 1HD - page 49

    49 Appendix 0.7" Wide TFT Active Matrix type, 3 panels Multi-media Projector 7.5lbs (3.4 kg) 13.11" x 4.27" x 9.70" (333mm x 108.5mm x 246.5mm) (not including Adjustable Feet) 964 x 544 dots 1,573,248 (964 x 544 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz Adjustable from 30 ? ...

  • BOXLIGHT Matinee 1HD - page 50

    50 Appendix WARNING TEMP . LAMP LAMP REPLACE READ Y LAMP LAMP MENU INPUT ON-OFF SELECT Unit : inch (mm) 13.11 (333) 9.70 (246.5) 4.27 (108.5) 11.8 ˚ (Max.) Dimensions ...

  • BOXLIGHT Matinee 1HD - page 51

    51 Appendix Configuration of T erminals COMPUTER INPUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 No Connect Horiz. sync. Ground (Vert.sync.) Sense 1 Sense 0 Vert. sync. Reserved 9 13 10 12 11 14 15 ...

  • BOXLIGHT Matinee 1HD - page 52

    Printed in Japan Part No. 610 304 4927 (1AA6P1P3782-- M4JE) LIMITED W ARRANTY BOXLIGHT Corporation ( “ BOXLIGHT ” ) warrants that each Matinee 1HD ( “ the Product ” ) sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only to the first person or entity tha ...

Manufacturer BOXLIGHT Category Projector

Documents that we receive from a manufacturer of a BOXLIGHT Matinee 1HD can be divided into several groups. They are, among others:
- BOXLIGHT technical drawings
- Matinee 1HD manuals
- BOXLIGHT product data sheets
- information booklets
- or energy labels BOXLIGHT Matinee 1HD
All of them are important, but the most important information from the point of view of use of the device are in the user manual BOXLIGHT Matinee 1HD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals BOXLIGHT Matinee 1HD, service manual, brief instructions and user manuals BOXLIGHT Matinee 1HD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product BOXLIGHT Matinee 1HD.

Similar manuals

A complete manual for the device BOXLIGHT Matinee 1HD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use BOXLIGHT Matinee 1HD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of BOXLIGHT Matinee 1HD.

A complete BOXLIGHT manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual BOXLIGHT Matinee 1HD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the BOXLIGHT Matinee 1HD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the BOXLIGHT Matinee 1HD, that we can find in the current document
3. Tips how to use the basic functions of the device BOXLIGHT Matinee 1HD - which should help us in our first steps of using BOXLIGHT Matinee 1HD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with BOXLIGHT Matinee 1HD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of BOXLIGHT Matinee 1HD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning BOXLIGHT Matinee 1HD?

Use the form below

If you did not solve your problem by using a manual BOXLIGHT Matinee 1HD, ask a question using the form below. If a user had a similar problem with BOXLIGHT Matinee 1HD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)