English dropdown-ico

Manual Quatech QSC(LP)-100

37 pages 0.45 mb
Download

Go to site of 37

Summary
  • Quatech QSC(LP)-100 - page 1

    QSC(LP)-100 Four Channel Low Profile RS-232 Asynchronous Communications Adapte r for PCI bus User's Manual QUATECH, INC. TEL: (330) 655-9000 5675 Hudson Industrial Parkway FAX: (330) 655-9010 Hudson, Ohio 44236 http://www.quatech.com ...

  • Quatech QSC(LP)-100 - page 2

    WARRANTY INFORMATION Quatech, Inc. warrants the QSC(LP)-100 to be free of defects for five (5) years from the date of purchase. Quatech, Inc. will repair or replace any board that fails to perform under normal operating conditions and in accordance with the procedures outlined in this document during the warranty period. Any damage that results fro ...

  • Quatech QSC(LP)-100 - page 3

     2006, Quatech, Inc. NOTICE The information contained in this document cannot be reproduced in any form without the written consent of Quatech, Inc. Likewise, any software programs that might accompany this document can be used only in accordance with any license agreement(s) between the purchaser and Quatech, Inc. Quatech, Inc. reserves the rig ...

  • Quatech QSC(LP)-100 - page 4

    Declaration of Conformity Manufacturer's Name: Quatech Inc. Manufacturer's Address: 5675 Hudson Industrial Parkway Hudson, Ohio 44236 (USA) Application of Council Directive: 89/336/EEC Standards to which Conformity is Declared: * EN50081-1 (EN55022, EN60555-2, EN60555-3) * EN50082-1 (IEC 801-2, IEC 801-3, & IEC 801-4) Type of Equipmen ...

  • Quatech QSC(LP)-100 - page 5

    38 10 Troubleshooting ................................. 36 9 Specifications ...................................... 35 8 PCI Resource Map ............................... 33 7 External Connections ............................ 31 6.3.1 QTPCI.EXE ..................................... 30 6.3 DOS and other operating systems ................... 30 6.2 OS/ ...

  • Quatech QSC(LP)-100 - page 6

    1 General Information The Quatech, Inc. QSC(LP)-100 provides four RS-232 asynchronous serial communication interfaces for Low Profile I BM-compatible personal computer systems using the PCI expansion bus. The QSC(LP)-100 uses Quatech's new Enhanced Serial Adapter design. Legacy serial port data rates are limited to a maximum of 115,200 bits pe ...

  • Quatech QSC(LP)-100 - page 7

    2 Hardware Configuration The QSC(LP)-100 is automatically configured at boot time by the computer's BIOS or operating system. There are no required switches or jumpers to set for installation. This chapter lists a number of optional jumper settings that control various hardware features. Jumpers J2-J5 are grouped together at the end of the boa ...

  • Quatech QSC(LP)-100 - page 8

    2.3 Force High-Speed UART Clock (X2, X4, or X8, J3-J5) These jumpers force an increase of the UART input clock frequency by a factor of two, four, or eight. This feature can allow legacy software to use baud rates above 115,200 bits per second. It is also useful if the serial port device driver does not directly support setting the higher baud rate ...

  • Quatech QSC(LP)-100 - page 9

    3 Hardware Installation 1. Turn off the power of the computer system in which the QSC(LP)-100 is to be installed. 2. Remove the system cover according to the instructions provided by the computer manufacturer. 3. Make any desired optional jumper setting changes. 4. Install the QSC(LP)-100 in any empty PCI expansion slot. The board should be secured ...

  • Quatech QSC(LP)-100 - page 10

    4 Address Map and Special Registers This chapter explains how the four UARTs and special registers are addressed, as well as the layout of those registers. This material will be of interest to programmers writing driver software for the QSC(LP)-100. 4.1 Base Address and Interrupt Level (IRQ) The base address and IRQ used by the QSC(LP)-100 are dete ...

  • Quatech QSC(LP)-100 - page 11

    4.2 Enabling the Special Registers The QSC(LP)-100 contains two unique registers, an Interrupt Status Register and an Options Register. These registers are enabled when the SPAD jumper (J6) is removed (factory default). They replace the UART Scratchpad Register on accesses to register address 7. The Interrupt Status Register and Options Register ar ...

  • Quatech QSC(LP)-100 - page 12

    4.4 Options Register The Options Register allows software to identify the QSC(LP)-100 as a Quatech Enhanced Serial Adapter. It also allows software to set the UART clock rate multiplier. Figure 9 shows the structure of the Options Register. The powerup default of the Options Register is all bits zero. Clock rate multiplier bit 0 RR0 0 Clock rate mu ...

  • Quatech QSC(LP)-100 - page 13

    4.4.2 Clock Rate Multiplier A standard RS-232 serial port operates at a clock speed of 1.8432 MHz. In order to achieve higher data rates, Quatech Enhanced Serial Adapters can operate at two times, four times or even eight times this standard clock speed. This is controlled by the clock rate multiplier bits in the Options Register. Software can dete ...

  • Quatech QSC(LP)-100 - page 14

    5 Windows Configurations 5.1 Windows Mille nnium 1. After inserting the QSC(LP)- 100 for the first time the "Add New Hardware Wizard" will begin. Select "Search for the best driver for your device.". Check the "Removable media" and "Specify location" box. Click the "Next" button. 2. Window will loca ...

  • Quatech QSC(LP)-100 - page 15

    5.2 Windows 2000 1. After inserting a QSC(LP)-100 for the first time, the "Add New Hardware Wizard will appear at start up. C lick the "OK" button. 2. The following dialog box will appear. I nsert the Quatech COM CD (shipped with the device). Click the "OK" button. 3. The following dialog box will display the appropriate IN ...

  • Quatech QSC(LP)-100 - page 16

    5.3 Windows 98 1. After inserting a QSC(LP)-100 for the first time, the "Add New Hardware Wizard will appear at start up. C lick the "Next" button. 2. Select "Search for the best driver for you r device". Click the "Next" button. 3. On the next dialog, select the " CD-ROM DRIVE " check box. Insert the Qu ...

  • Quatech QSC(LP)-100 - page 17

    4. The following dialog box will display the appropriate INF file on the diskette in the drive. Click the "Next" button. 5. Window will copy the INF file from the diskette and display a final dialog indication that the process is complete. Click the "Finish" button. 5.4 Windows 95 Windows 95 maintains a registry of all known har ...

  • Quatech QSC(LP)-100 - page 18

    2. Select the radio button for "Driver from disk provided by hardware manufacturer." Click the "OK" button to continue. 3. An "Install From Disk" dialog box should pop up. Insert the disk with the Quatech INF files on it, select the correct drive letter, and click the "OK" button. Windows 95 automatically bro ...

  • Quatech QSC(LP)-100 - page 19

    The following instructions provide step-by-step instructions on viewing resources used by the QSC(LP)-100 in Windows using the "Device Manager" utility. Select Start|Help from within Windows for additional information on this utility. 1. Double click the "System" icon inside the Control Panel folder. This opens up the System Pro ...

  • Quatech QSC(LP)-100 - page 20

    Figure 12--- Windows Device Manager 6. The QSC(LP)-100 serial ports are also listed under the group Ports ( COM and LPT). Windows 95 does not assign COM1-COM4 to ports addressed at nonstandard locations. The QSC(LP)-100 ports will be enumerated starting with COM5 (or higher) even if lower logical numbers are available. 7. Select any of the Quatech ...

  • Quatech QSC(LP)-100 - page 21

    Figure 13--- Windows Device Manager 9. Use the Logical COM Port names to access the serial ports on your QSC(LP)-100 through your software applications. Note: The Logical COM Port name is assigned to your ports by Windows . This name is required by a Windows application when accessing a particular p ort. QSC(LP)-100 User's Manual 21 ...

  • Quatech QSC(LP)-100 - page 22

    5.6.1 Changing Resource Settings with Device Manager 1. Start the Windows 95/98/ME Device Manager . 2. Double click on the hardware class Multi-Port Serial Adapters to list hardware devices in the class. 3. The QSC(LP)-100 “parent device” belongs to this hardware class. The full device name for the QSC(LP)-100 is Quatech QSC(LP)-100: Four-Port ...

  • Quatech QSC(LP)-100 - page 23

    4. Open the Properties dialog for the QSC(LP)-100 device, then click the Resources tab to view the Input/Output Range and Interrupt Request resource allocations. Do not change these settings without specific instructions from a Quatech Technical Support Specialist. To exit without saving changes, click the “cancel” button. 5. Open the Propertie ...

  • Quatech QSC(LP)-100 - page 24

    The X2 clock mode locks the ports hardware clock at double the standard rate. The baud rate the port runs at will always be double the rate requested by the applications. This mode is useful 230,400 X2 The X1 clock mode mimics a standard COM port. The hardware drivers lock the clock to the standard rate. The port will run at the baud rate requested ...

  • Quatech QSC(LP)-100 - page 25

    The X8 clock mode locks the ports hardware clock at eight times the standard rate. The baud rate the port runs at will always be eight times the rate requested by the application. This mode is useful for legacy applications which cannot request baud rates over 115.200. 921,600 X8 The X4 clock mode locks the ports hardware clock at four times the st ...

  • Quatech QSC(LP)-100 - page 26

    8. Click the "Port Settings" tab and then click the "Advanced" button. The QSC(LP)-100 driver will display a custom Advanced Port Settings control, which allows the ports UART compatibility mode and FIFO threshold levels to be configured. The threshold values of full-scale for the transmit buffer and ¾-scale for the receive buf ...

  • Quatech QSC(LP)-100 - page 27

    QSC(LP)-100 User's Manual 27 ...

  • Quatech QSC(LP)-100 - page 28

    6 Other Operating Systems Device drivers for Windows NT and OS/2 are also available for the QSC(LP)-100. The board can be used under DOS and other operating systems as well in many circumstances. The software described below can be downloaded from the Quatech web site if it did not come with the board. 6.1 Windows NT The Windows NT device driver is ...

  • Quatech QSC(LP)-100 - page 29

    6.3.1 QTPCI.EXE Quatech's "QTPCI" utility supplies the information required when modifying the serial port settings of the application. This program should be run from real DOS, not in a Windows DOS box. Figure 14 shows the Basic Mode display for the QSC(LP)-100 after the "Q" key has been pressed. In this example, the QSC(L ...

  • Quatech QSC(LP)-100 - page 30

    Figure 15 shows the Expert Mode display for the QSC(LP)-100 after the "Q" key has been pressed. The information from the Basic Mode display is presented along with more details such as the Vendor and Device IDs, PCI Class Code, size of memory and I/O regions, etc. Pressing the "N" key will show similar information for all non-Qu ...

  • Quatech QSC(LP)-100 - page 31

    7 External Connections RS-232-C devices are classified by their function as either Data Terminal Equipment (DTE) or Data Communication Equipment (DCE). Generally, data terminal equipment is defined as the communication source and data communication equipment is defined as the device that provides a communication channel between two DTE-type devices ...

  • Quatech QSC(LP)-100 - page 32

    The QSC(LP)-100 is a DTE device which connects to peripheral equipment through a single female D- 44 connector, or using the adapter cable, four male D-9 connectors. The standard serial port connections are listed in Figure 18. 5 30 5 26 5 8 5 19 GND 9 18 9 22 9 25 9 29 RI 1 33 1 37 1 41 1 44 DCD 6 16 6 20 6 23 6 27 DSR 4 17 4 21 4 24 4 28 DTR 8 32 ...

  • Quatech QSC(LP)-100 - page 33

    8 PCI Resource Map Listed below are the PCI resources used by the QSC(LP)-100. Such information may be of use to customers writing their own device drivers or other custom software. A detailed description of the QSC(LP)-100's UARTs is available on the Quatech web site. (all numbers in hex) PCI Vendor ID: 0x135C Quatech, Inc. PCI Device ID: 0x0 ...

  • Quatech QSC(LP)-100 - page 34

    9 Specifications Bus interface: PCI, 32-bit bus, Universal Voltage Signaling IBM -compatible computers Dimensions: approx. 5.0" x 3.7" Serial ports Controller: 16550 with 16-byte FIFOs Interface: One female D- 44 connector Four male D-9 connectors using adapter cable Transceivers: ICL3245CA High-level output: +5V min Low-level output: -5V ...

  • Quatech QSC(LP)-100 - page 35

    4800 4300 3300 1570 800 115.2 2000 1630 1100 900 330 230.4 1100 900 670 430 100 460.8 470 430 300 100 N/A 921.6 25% trans time 20% trans time 15% trans time 10% trans time 4% trans time Maximum Load (pF) Data Rate (kbaud) Note 1: The signal transition time ratio is defined as the percentage of the unit interval or bit time (the inverse of the data ...

  • Quatech QSC(LP)-100 - page 36

    10 Troubleshooting Listed here are some common problems and frequent causes of those problems. If the information here does not provide a solution, contact Quatech technical support. Any unauthorized repairs or modifications will void the QSC(LP)-100's warranty. Computer will not boot up. 1. Is the QSC(LP)-100 properly inserted? Remove the car ...

  • Quatech QSC(LP)-100 - page 37

    QSC(LP)-100 User's Manual Revision 1.12 November 2006 P/N: 940-0180-112 QSC(LP)-100 User's Manual i ...

Manufacturer Quatech Category Switch

Documents that we receive from a manufacturer of a Quatech QSC(LP)-100 can be divided into several groups. They are, among others:
- Quatech technical drawings
- QSC(LP)-100 manuals
- Quatech product data sheets
- information booklets
- or energy labels Quatech QSC(LP)-100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Quatech QSC(LP)-100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Quatech QSC(LP)-100, service manual, brief instructions and user manuals Quatech QSC(LP)-100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Quatech QSC(LP)-100.

Similar manuals

A complete manual for the device Quatech QSC(LP)-100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Quatech QSC(LP)-100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Quatech QSC(LP)-100.

A complete Quatech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Quatech QSC(LP)-100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Quatech QSC(LP)-100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Quatech QSC(LP)-100, that we can find in the current document
3. Tips how to use the basic functions of the device Quatech QSC(LP)-100 - which should help us in our first steps of using Quatech QSC(LP)-100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Quatech QSC(LP)-100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Quatech QSC(LP)-100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Quatech QSC(LP)-100?

Use the form below

If you did not solve your problem by using a manual Quatech QSC(LP)-100, ask a question using the form below. If a user had a similar problem with Quatech QSC(LP)-100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)