English dropdown-ico

Manual Emerson P/N 400361-00

152 pages 2.58 mb
Download

Go to site of 152

Summary
  • Emerson P/N 400361-00 - page 1

    User Guide P/N 40 0361-0 0 Revision: A1 Date: July 3, 2 003 © Cont rol Tech niques Drives , Inc. 2003 SM-EZM otion Module ...

  • Emerson P/N 400361-00 - page 2

    ...

  • Emerson P/N 400361-00 - page 3

    Information furn ished by Control Techniques Drives Inc. (Control Techniques) is believed to be accurate and reliable. However, no responsib ility is assumed by C ontrol Tech niques for its use . Control Techniques r eserves t he right to change th e design or oper ation of the equi pment described herein and any associated m otion product s withou ...

  • Emerson P/N 400361-00 - page 4

    ii © Control Techniques Drives, Inc. 2003 All rights reserved. Part Number: Revisi on: A1 Date: July 2003 Printed in United States of America Information in this docum ent is subject to change without notice, No part if this document may be reprod uced or transmitted in any form or by any means, electr onic or mechanical, for any purpos e, without ...

  • Emerson P/N 400361-00 - page 5

    iii Customer Support Control Techniques 12005 Tech nology Dr ive Eden Prairie, Minnes ota 55344-3620 U.S.A. Telephon e: (952) 995 -8000 or (8 00) 397-3 786 It is Contro l Techniques’ goal to ensure y our greatest poss ible satisfaction with the operation of our products. We are dedicated to providing fast, friendly, and accura te assistance. Th a ...

  • Emerson P/N 400361-00 - page 6

    iv Customer Servic e (Sales ) (952) 995- 8000 or (8 00) 39 7-3786 Email: customer.service@ emersonct.com Authorized Control Tech niques distributors may place orders directly with o ur Customer Service department. Contact the Customer Service department at th is number for the d istributor nearest you . Document Conventions Manual convent ions have ...

  • Emerson P/N 400361-00 - page 7

    v Safety Instructions General Wa rning Failure to follow safe installation guidelines can cause death or serious injur y. The voltages used in the pro duct can cause severe electric shock and/ or burn s and could be lethal. Extreme care is necessary at all times when working with or adjacen t to the product. The installation must compl y with all r ...

  • Emerson P/N 400361-00 - page 8

    vi ...

  • Emerson P/N 400361-00 - page 9

    SM-EZMOTIO N Module M anual www .emersonct.co m vii Safe ty Considerations Safety Information The SM-E ZMOTIO N modul e and its associ ated driv e are intend ed as c omponents for pr ofession al inco rporati on in to complete equip ment or system s. If i nstalled inco rrectl y the drive m ay presen t a safety hazard. The drive uses hi gh volta ges ...

  • Emerson P/N 400361-00 - page 10

    viii www.emersonct.com SM-E Z Motion Module Refe rence are isolate d from human con tact by at leas t one laye r of insulati on rated fo r use at the appl ied AC su pply volta ge. ...

  • Emerson P/N 400361-00 - page 11

    ix Customer Suppo rt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Document Convention s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson P/N 400361-00 - page 12

    x SM-EZM otio n Module T echnical Manual 5.2 Jog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 5.3 Home. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson P/N 400361-00 - page 13

    xi 7.6 Create Us er Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 3 7.6.1 Prog ram View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Emerson P/N 400361-00 - page 14

    xii SM-EZM otio n Module T echnical Manual 1 1 Parameter Descr iptions 85 12 Drive Pa rameters Used by SM-EZMotion Module 1 1 1 12.1 Desc ription. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 12.2 Ch art. . . . . . . . . . . . ...

  • Emerson P/N 400361-00 - page 15

    Introducti on www .emers onct.com 1 1 Introduction 1.1 Introduct ion Modern v ariabl e speed drive s uch as the Un idrive SP offer a mult itude of built-i n featu res su ch as ramp contr ol, s peed control , PID Lo ops, and e ven sim ple posi tion c ontrol. However, the base d rive’s fu nction ality is to o limite d for many appl icat ions. Wh en ...

  • Emerson P/N 400361-00 - page 16

    2 www .emerson ct.com SM-EZM o tion M odule User Gu ide • P r o g r a m m i n g PowerTool s Pro will ru n on Windows 98, NT , 2000, and XP oper ating systems. ...

  • Emerson P/N 400361-00 - page 17

    Installatio n www .emersonc t.com 3 2 Installation This sec tion o f the ma nual will cover basic i nstallat ion informat ion. 2.1 Mechanical Installatio n Please refer to the Instal lation Sheet that comes with the SM-EZMo tion mo dule fo r detail s on ins talling t he modu le into the Un idri ve SP. 2.2 Slot Selection The SM-E ZMotion module may ...

  • Emerson P/N 400361-00 - page 18

    4 www .emerson ct.com SM-EZM o tion M odule User Gu ide Figure 3: Motor Feedback to Unidri ve SP Connection Diagram I/O Co nnector 1 I/O Co nnector 2 I/O Co nnector 4 L1 L2 L3 U V W 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GREEN BROWN BLUE ORANGE BLACK YELLOW WHT/GRY GRY/W HT WHT/BRN BRN/W HT RED/OR G ORG/RE D RED/BL U Encod er Feedback 15 pi n D- sub o ...

  • Emerson P/N 400361-00 - page 19

    Installation www . emerson ct.com 5 2.6 Simple Servo Motor Phasing Test When con necting a non- standard servo motor to th e Unidrive S P, it is necess ary to know the wir ing configur ation of t he motor . At t imes, all of the necess ary wiring d ocumentat ion for c onnectin g the mo tor is n ot readily a vailabl e from th e moto r manufac turer. ...

  • Emerson P/N 400361-00 - page 20

    6 www .emerson ct.com SM-EZM o tion M odule User Gu ide ...

  • Emerson P/N 400361-00 - page 21

    PowerT ools Pro Config uration S oftware www .emersonct.c om 7 3 Powe rTools Pro Configuration Software 3.1 Introduct ion PowerT ools Pr o is the software used to confi gure hardwar e type, setup parameter s, I/O func tionality , motion profiles, user pr ograms, and net works fo r the SM-EZMo tion mo dule. Po werTools Pro c an also b e used as a di ...

  • Emerson P/N 400361-00 - page 22

    8 www .emerson ct.com SM-EZM o tion M odule User Gu ide • On the menu bar, c lick a menu n ame to dis play a lis t of options . On th e menu , either click an optio n or use the DOWN ARROW to mo ve down the lis t, and then press ENTE R. • Press AL T and press the unde rlined letter in the menu nam e. Then press the underlin ed letter in the opt ...

  • Emerson P/N 400361-00 - page 23

    PowerT ools Pro Configur ation Softwa re www .eme rsonct .com 9 Figu re 9: Edit Menu 3.3.1.2.1 Undo Selecti ng Undo will undo the la st ch ange ma de to a u ser program. Up to the last ten ch anges made can be undo ne. 3.3.1.2.2 Cut Selecti ng Cut wi ll remo ve the highlig hted text fr om a u ser program. T o hig hlight tex t in a pr ogram, pl ace ...

  • Emerson P/N 400361-00 - page 24

    10 www .emersonct.c om SM-EZM otion Module User Gu ide Figure 10: Device Menu 3.3.1.3.1 Change Address Selecti ng Chan ge Addre ss from the Device m enu al lows the user to change the Mod bus node address of a drive / module sy stem. T he user mu st be onlin e with the device fo r Change Add ress to be avail able. Th e user will be prompt ed for th ...

  • Emerson P/N 400361-00 - page 25

    PowerT ools Pro Con figurati on Software www .emerson ct.com 1 1 Figur e 12: Modbus Setu p Window On the Modbus Setup win dow, the user can configure the maximum node a ddress they wish to poll fo r when uploadin g dev ices or f lash upg radin g devic es. Powe rTools Pro wil l not chec k to see if any devic es with no de address es high er than the ...

  • Emerson P/N 400361-00 - page 26

    12 www .emersonct.c om SM-EZM otion Module User Gu ide 3.3.1.5.1 Watch Window Selecti ng Watch Window will la unch a diagnos tics tool that allows th e user t o view the curren t valu e of mu ltiple SM-EZMo tion pa ramet ers while o nline with the module. For more informat ion on the Wat ch Windo w, refer to Section 11 - Diag nostics of thi s manua ...

  • Emerson P/N 400361-00 - page 27

    Po we rT o ol s Pr o Con f igu r at io n Sof t wa re w ww.eme rs o nc t. co m 1 3 Navigation Tr ee to rem ove it from the display . If the Hierarchy is not v isibl e, selec t Show Navi gation Tree t o make it a ppear aga in. 3.3.1.7 Window Figure 19 shows the Wind ow Menu as se lected fr om the PowerT ools Pr o Menu Bar. Figur e 19: Window Me nu 3. ...

  • Emerson P/N 400361-00 - page 28

    14 www .emersonct.c om SM-EZM otion Module User Gu ide 3.3.2 . 5 Upload Same as Device > Upload fr om the Menu Bar . Select ing Upload will scan the Modbu s network for av ailable nod es, and then up load th e speci fied no de addres s configur ations. Upl oad is only av ailable if a co nfigur ation is not alre ady open. 3.3.2.6 Download Same as ...

  • Emerson P/N 400361-00 - page 29

    Po we rT o ol s Pr o Con f igu r at io n Sof t wa re w ww.eme rs o nc t. co m 1 5 3.3.2.1 5 Clear Errors Same as Device > Reset Er rors fr om the M enu Bar. Selecti ng Reset E rrors wi ll clea r any acti ve errors. I f the faul t cond iti on sti ll ex ists, the er ror ma y reac tiva te immed iately a fter clea ring it. 3.3.2.16 Watch Window Same ...

  • Emerson P/N 400361-00 - page 30

    16 www .emersonct.c om SM-EZM otion Module User Gu ide “-“sym bol next t o the gr ouping. Do ing s o will hi de all of t he branche s within that group . Natural p rogressi on throug h the hier archy, s tarting a t the top, and wor king tow ards the bottom w ill step the user through the entire co nfigurati on. The Hi erarch y starts at the top ...

  • Emerson P/N 400361-00 - page 31

    Communic ations www .emerso nct.com 17 4 Communications 4.1 Commun ications Protoco l PowerT ools Pr o commun icate s with the SM-E ZMotion module us ing 3 2-bit Mod bus RTU p rotocol. 4.2 Connectin g the PC to the SM-EZMotion Module The SM-EZ Motion comm unica tes with the PC through the Unidrive S P's commu nicat ions por t. An RS-23 2 to RS ...

  • Emerson P/N 400361-00 - page 32

    18 www .emer sonct.com SM-EZMo tion Mo dule User Guide Figure 24: Memory Storage i n the SM-EZMo tion Module 4.4.1 Uploading Uploading is th e process of readi ng the con figur ation stored i n the SM- EZMoti on modu le and lo ading that data into a fil e on the PC. Arrow B on Fig ure 24 ab ove represent s a st andar d Upload. T o upload a con figu ...

  • Emerson P/N 400361-00 - page 33

    Communic ations www .emerso nct.com 19 valu es into th e user configu ratio n (Firs t Arrow H followed by Arrow A, but d ata from H is not st ored in P owerTools Pro file) . The tabl e below s hows an ex ample of h ow these th ree option s work: 4.4.4 Updating to RAM The Updat e to RAM button can be us ed to send chan ges to the SM-EZMotio n module ...

  • Emerson P/N 400361-00 - page 34

    20 www .emer sonct.com SM-EZMo tion Mo dule User Guide Figure 28: PowerTools Pro Oper ation Preferences Windo w Following is a d escripti on of ea ch of the pr eferenc e settings: 4.4.5.1 Download Group 4.4.5.1.1 Ignore saving f ile on Ptools/Drive revision conversion On a downl oad PowerTo ols Pro f irst che cks the rev ision of the SM-E ZMotion m ...

  • Emerson P/N 400361-00 - page 35

    Communic ations www .emerso nct.com 21 4.4.5.3.2 Always bypass NVM upload When up loading a co nfigurati on, Powe rTools Pro uploa ds from a Non -User NVM lo cation, s o the d ata upload ed onl y matches exactly what wa s last do wnloaded. By sele cting this radio bu tton, the p arameter va lues in the Save to NVM list wil l NOT b e uplo aded. 4.4. ...

  • Emerson P/N 400361-00 - page 36

    22 www .emer sonct.com SM-EZMo tion Mo dule User Guide ...

  • Emerson P/N 400361-00 - page 37

    How Motion Works www .emersonc t.com 23 5 How Motion Works 5.1 Introduct ion The SM-E ZMotion module offers f our differe nt motio n object types . These four type s are Jo g, Home, I ndex, a nd Gear. All motio n objects run on wh at is called a Prof ile. Only on e moti on object can r un on a Profil e at a ti me. For applica tions that nee d to ru ...

  • Emerson P/N 400361-00 - page 38

    24 www .emersonct.c om SM-EZM otion Module User Gu ide Figure 34: Ho me to Marker Profile (Specified Offset) 5.3.2 Ho me to Sensor The Home to Sensor p rofile a cts much l ike the Hom e to Marker pr ofile, b ut instea d of us ing th e Encode r Marker as a reference, an ex ternal sensor mounted to the machi ne is used as the referenc e. In a Home t ...

  • Emerson P/N 400361-00 - page 39

    How Motion Works www .emersonc t.com 25 Figu re 37: H ome to Sens or t hen Ma rker Prof ile (Calculated Offset) Figu re 38: H ome to Sens or t hen Ma rker Prof ile Specified Offset) 5.3.4 If On Sensor Options In a Home to Sens or, or Home t o Sensor then Mar ker profile special conditi ons mus t be crea ted to ha ndle t he situatio n when the E xte ...

  • Emerson P/N 400361-00 - page 40

    26 www .emersonct.c om SM-EZM otion Module User Gu ide position . After completi ng an Ab solute Index, the motor will always b e in the s ame po sition r egardle ss of the start ing position of the m otor. The d irectio n that t he motor m oves during a n Absolu te Index i s dep endant upon its p osition when the i ndex is initiat ed. If an Abs ol ...

  • Emerson P/N 400361-00 - page 41

    How Motion Works www .emersonc t.com 27 Figure 47: Registration to Sensor Profile (Offset < 0) 5.4.4 Rotary Plus Index A Rotary Plus Index is used when R otary Ro llover is a ctive. The Rotary Plus Inde x is si milar to an Absol ute Inde x, but it is for ced to go in the positiv e direc tion to get to it s programme d posi tion. Th e progra mmed ...

  • Emerson P/N 400361-00 - page 42

    28 www .emersonct.c om SM-EZM otion Module User Gu ide Figure 50: Timed Index Profile In some ca ses, a n index time is c alculat ed base d on othe r paramete rs in a user prog ram. To avo id poss ible machin e damage, the user c an spe cify ma ximum v alues for accel , velo city, and decel . There fore, when the SM -EZMo tion firmware c alculat es ...

  • Emerson P/N 400361-00 - page 43

    How Motion Works www .emersonc t.com 29 profile ar e as foll ows: Followe r Dis tance Uni ts / V eloci ty Time scal e. And un its of ac celera tion for a real time mo ve are Foll D istan ce Unit s / Velo cit y Times cale / Accel T imescal e. A few e xamples of t hese u nits a re as li sted bel ow. Base d on these u nits, we see that v elocit y and ...

  • Emerson P/N 400361-00 - page 44

    30 www .emersonct.c om SM-EZM otion Module User Gu ide Figure 52 : Two Indexes 200 Ve l o c i t y Tim e Index 0 Profile 0 -100 Ve l o c i t y Ti m e Index 1 Profile 1 200 Ve l o c i t y Tim e Index 0 p lus Index 1 Summed Profile 100 Index 1 Initiate Index 0 Initiate ...

  • Emerson P/N 400361-00 - page 45

    How I/O Works www .emersonct .com 31 6 How I/O Works 6.1 I/O Scan When use d to activ ate S M-EZMotio n functio ns, the Unidrive S P and SM -EZMo tion mo dule I/O a re scanned every trajectory u pdate. If the Uni drive SP I /O is used to trigger fun ctions i n the bas e drive itself (i.e . Thresho ld Detector s, Progr ammable Logic , Binary S um, e ...

  • Emerson P/N 400361-00 - page 46

    32 www .emer sonct.com SM-EZMo tion Mo dule User Guide ...

  • Emerson P/N 400361-00 - page 47

    Configur ing an Appl ication www .emersonct.c om 33 7 Configuring an Application 7.1 Introduct ion All appl ication s using SM-E ZMotion modul es are configur ed usin g Power Tools Pro co nfigurati on so ftware. For spec ific que stions o n PowerT ools P ro opera tion, please refe r to S ection 3 of this manual. The hie rarchy in Power Tools give s ...

  • Emerson P/N 400361-00 - page 48

    34 www .emersonct.c om SM-EZM otion Module User Gu ide 7.2.2.2 SM-EZMotion Module View If SM-EZM otion is sele cted in the Slot # Module c ombo box, the r emainder of the view sh ould be bl ank. The hierarch y autom atica lly updates to show th at an SM-EZM otio n module is popula ted in th at specif ic sl ot, see Figure 55 . Figur e 55: Slot # Vie ...

  • Emerson P/N 400361-00 - page 49

    Configur ing an Appl ication www .emersonct.c om 35 7.2. 2.6 SM-Dev iceNet Module V iew If Device Net is selecte d in th e Slot # Module c ombo box, the remai nder of t he view should have con figurati on paramete rs to def ine the pr operties of the DeviceNet device and netw ork. The h ierarchy should a utomati cally update to s how tha t a Devi c ...

  • Emerson P/N 400361-00 - page 50

    36 www .emersonct.c om SM-EZM otion Module User Gu ide side of t he vie w. The v alues display ed ar e only t he val ues at the time the "G et Menu V alues" button wa s selec ted. The values are NO T conti nuously updating. Control But ton Get Menu Values Pressing the G et Menu Va lues control button wi ll caus e PowerT ools Pr o to read ...

  • Emerson P/N 400361-00 - page 51

    Configur ing an Appl ication www .emersonct.c om 37 7.3.1 Setup View The Setu p view al lows the u ser to s etup var ious paramete rs related to how t he overa ll system operates . Figure 65 shows an examp le of the S etup view . Figu re 65: Se tup Vie w Name This is a 12-cha racter alpha/ numeric user-co nfigured name for this axi s. Enter the nam ...

  • Emerson P/N 400361-00 - page 52

    38 www .emersonct.c om SM-EZM otion Module User Gu ide Distance Units Nam e This is a 10- characte r nam e for th e dis tance user u nits you want to u se in yo ur ap plicatio n Decimal Places The numb er of dec imal places set in this par ameter determin es the number o f digits a fter the d ecima l poin t used in a ll dista nce and p osition p ar ...

  • Emerson P/N 400361-00 - page 53

    Configur ing an Appl ication www .emersonct.c om 39 synchron ized m otion thr oughou t the softwar e. Usi ng a high number of d ecimal pl aces will i mprove p osition res olution, but will a lso lim it the max imum position . You can selec t from zero to s ix decim al places of pr ogrammi ng resoluti on. Master Distance Units Scaling The scal ing f ...

  • Emerson P/N 400361-00 - page 54

    40 www .emersonct.c om SM-EZM otion Module User Gu ide 7.3.4 Position View The Po sition V iew a llows th e use r to co nfigure paramete rs related to posi tion con trol of th e SM- EZ Moti on module. Figure 68 shows a sampl e of the Positio n view. Figure 68: P osition View Define Home Po sition This is t he value t o which the pos ition comm and ...

  • Emerson P/N 400361-00 - page 55

    Configur ing an Appl ication www .emersonct.c om 41 software. If an absolute ind ex is used with a non-zero rotary rollover point, the SM-EZ Motion will ca lcula te the sho rtest path to its dest inatio n and m ove i n the requ ired directi on. To force the mot or to ru n a cert ain di rection , use the Rotary Plus or Ro tary Min us type o f indexe ...

  • Emerson P/N 400361-00 - page 56

    42 www .emersonct.c om SM-EZM otion Module User Gu ide Feedhold Decel/Accel When the Fee dhold desti nation is activ ated, the mo tor will decelerate to a s top in the t ime sp ecified by the Feedhol dDecelTim e paramet er. Wh en feedh old is clea red, the mot or will acc elerate back to speed in the sam e specifi ed perio d of tim e. Feedhol d is ...

  • Emerson P/N 400361-00 - page 57

    Configur ing an Appl ication www .emersonct.c om 43 setting the ban dwidth too high can result in ringing (audi ble ringing ) in the v elocit y loop. The units for Veloci ty Loop Bandwidth are Hz. Position Loo p Response The Posi tion Loop Res ponse dir ectly i mpacts the s tiffnes s of the po sition lo op. Pos ition Loop Respo nse is effectiv ely ...

  • Emerson P/N 400361-00 - page 58

    44 www .emersonct.c om SM-EZM otion Module User Gu ide Power Up The Powe r Up box contai ns infor matio n related to the lifetime of the Un idrive SP and S M-EZM otion modu le. Following are th e paramet ers liste d in the Power Up informat ion box : Module Power Up C ount Module P ower Up Cou nt is a curre nt value of how many times the SM-EZ Moti ...

  • Emerson P/N 400361-00 - page 59

    Configur ing an Appl ication www .emersonct.c om 45 Codes, please ref er to th e Unid rive SP Us ers G uide or Unidrive S P Advan ced Users Guide. No te that t his trip code is no t the same as the Trip Co de or Error Code with in a solutions modul e. For ex ample, if a n error oc curs in a SM-EZMo tion m odule locat ed in Sl ot 1, th e Trip Log wi ...

  • Emerson P/N 400361-00 - page 60

    46 www .emersonct.c om SM-EZM otion Module User Gu ide range be gins a t an absol ute posi tion of zero and ends at the R otar yRoll overPo sn. For examp le, in a rotary applica tion a P LS co uld be se tup with an OnPosn of 90 d egrees a nd an OffP osn o f 100 degrees . If the R otaryRollover Posn i s set to 3 60 degree s the PLS wo uld come on at ...

  • Emerson P/N 400361-00 - page 61

    Configur ing an Appl ication www .emersonct.c om 47 Capture Sources and Destin ations Figure 77 shows a b lock di agram of the Captu re objec t Figure 77 : Captu re Object Sources CaptureTr iggered - The Captur eTrigger ed sign al is read-only and i ndicates that th e Capture c omponent was activate d, and t hat data has been captured . CaptureTr i ...

  • Emerson P/N 400361-00 - page 62

    48 www .emersonct.c om SM-EZM otion Module User Gu ide time th ey activat e even when a cap ture o bject is not configur ed. If any of thes e Sources are ass igned to a destinati on, the ca pture d data may be use d by the destination function. The Des tinatio ns that can use the auto matical ly captu red data are as follow s: • Index.#.In itiate ...

  • Emerson P/N 400361-00 - page 63

    Configur ing an Appl ication www .emersonct.c om 49 Figu re 80: Q ueue Blo ck Diag ram Sources Queue E xit - This s ource act ivates when t he Comp arator Select p arameter is gre ater to or e qual to the su m of the data enter ed int o the queue, and the queue offset. Queue Em pty - Th is sour ce is ac tive if n o data is stored in the queue. It w ...

  • Emerson P/N 400361-00 - page 64

    50 www .emersonct.c om SM-EZM otion Module User Gu ide Adding and Delet ing Variables The defa ult num ber of va riables is ten. To add mo re user variab les, cl ick on the up arrow n ext to the "N umber o f User Variabl es" sp inner box o n the User Variab les v iew. The maximum number o f user variable s is 256. Only th e last va riable ...

  • Emerson P/N 400361-00 - page 65

    Configur ing an Appl ication www .emersonct.c om 51 than ha ving to ac cess them indiv idually . In th e SM-EZMo tion mo dule it i s poss ible to ac cess 32 Us er Bits in a sin gle pa rameter. This par ameter is name d BitRegis ter.#.Va lue. B ecaus e some of the 32 Us er Bits may be us ed by the progra m, and sho uld not be mod ified from the n et ...

  • Emerson P/N 400361-00 - page 66

    52 www .emersonct.c om SM-EZM otion Module User Gu ide that parti cula r bit will b e passed throu gh when written. Each add itiona l group of 32 Us er Bits tha t are a dded, a new Mask parameter will app ear for that g roup. M ask 0 will control the mask for Us er Bits 0 through 3 1. Mask 1 will control the mask for Bits 3 2 through 63. Th is sequ ...

  • Emerson P/N 400361-00 - page 67

    Configur ing an Appl ication www .emersonct.c om 53 which So urce has been assigne d to it. Destinati ons can als o be dragge d from ri ght to left, ov er to Source s. Assign Button Method Click o n both th e Source and D estinat ion that a re to b e assigne d to each other. Once bo th are hig hligh ted, the Assign but ton in the lowe r left c orne ...

  • Emerson P/N 400361-00 - page 68

    54 www .emersonct.c om SM-EZM otion Module User Gu ide 7.4.2 SP I/O Setup View Figure 88: Drive I/O Setup View 7.4.3 EZ Moti on I/O Setu p View Figure 89 : Module I/O Setup Vi ew 7.4.4 Selector View The Selec tor View al lows the user to configur e the Sel ector object. The sele ctor us es a bina ry to deci mal conv ersion, which requi res fewer I/ ...

  • Emerson P/N 400361-00 - page 69

    Configur ing an Appl ication www .emersonct.c om 55 dir ect r esul t of th e numb er of Selec t lin es. T he fo rmul a is as follow s: # of Se lection outputs = 2n (wh ere n is the num ber of Select i nputs ) The max imum numb er of Select l ines is eight . Once you h ave de termined how ma ny se lect lin es you want, the as signmen ts to thes e Se ...

  • Emerson P/N 400361-00 - page 70

    56 www .emersonct.c om SM-EZM otion Module User Gu ide Jog Name This is a desc riptiv e chara cter stri ng whic h can be assigne d to the specifi c jog. Giving a name to a jog can make the m otion setup eas ier to fo llow. Time Base This li st box allo ws the use r to selec t the time bas e for the individ ual jog. The options are R ealtime a nd Sy ...

  • Emerson P/N 400361-00 - page 71

    Configur ing an Appl ication www .emersonct.c om 57 Figu re 94: J og A ctiva te Figure 95 : Jog Select U sage If the Jog directi on is r eversed, th e Jog.# .Decel v alue will be used to de celerat e the moto r to zero spe ed and the n the Jog.#. Accel wil l be used to accel erate to the new (op posite sign) velocit y. Note The Jog destinations can ...

  • Emerson P/N 400361-00 - page 72

    58 www .emersonct.c om SM-EZM otion Module User Gu ide home refe rence. Acceleration Averag e Accelerati on rate used dur ing the home. Unit s are specifi ed on t he User Un its View . Deceleration This is the average Dece leratio n rate used at the end of the Home mo ve in us er units . If on sensor... Group These rad io buttons determi ne how th ...

  • Emerson P/N 400361-00 - page 73

    Configur ing an Appl ication www .emersonct.c om 59 Destinations Home.#.I nitiate - The Ho me.#.Init iate desti nation is used to initiate the hom e funct ion. The Home is i nitiated o n the rising ed ge of this function. The dev ice will not initi ate a Home if th ere is an Inde x, Jog, o r Prog ram in progres s, or if the Sto p desti nation is ac ...

  • Emerson P/N 400361-00 - page 74

    60 www .emersonct.c om SM-EZM otion Module User Gu ide the SM-E Z Motio n module wi ll au tomatical ly calcu late th e necessar y velocity , accel , and decel in order to achie ve the program med dist ance in th e speci fied ti me. Note A user pro gram cannot comp ound into a Timed Index, or compound o ut of a Timed Index. All inde x typ es can be ...

  • Emerson P/N 400361-00 - page 75

    Configur ing an Appl ication www .emersonct.c om 61 PLS h as On an d Off poin ts ju st like a globa l PLS, bu t the On and Off po ints are spe cified as an in crem ental distanc e from the s tart of th e index, instea d of absol ute pos itions. Each index ha s its own On an d Off poin ts, an d the Index. #.PLSSta tus is on ly update d when I ndex# ...

  • Emerson P/N 400361-00 - page 76

    62 www .emersonct.c om SM-EZM otion Module User Gu ide If a regis tration sen sor is seen outs ide of t his windo w (not between the Window Start and W indo wEnd posi tions) th en it will b e ignore d. Window E nd This param eter defines the end of the Registr ation Sens or Valid W indow rel ative t o start pos itio n of this in dex. Thi s is an un ...

  • Emerson P/N 400361-00 - page 77

    Configur ing an Appl ication www .emersonct.c om 63 active w ill not pre vent Pro fileLimi ted from a ctivati ng. Index. #.Initiate - The I ndex.# .Initiate d estin ation is used to initiate the s pecific index. T he Index is in itiated on the rising edge of this function. An Inde x cannot be initia ted if there is an Hom e, Jog, or Progr am in pr ...

  • Emerson P/N 400361-00 - page 78

    64 www .emersonct.c om SM-EZM otion Module User Gu ide Figure 101: Progra m View For detail s on t he Program View or how to c reate a program , see Secti on 7 - How User Program s Work in this manual. ...

  • Emerson P/N 400361-00 - page 79

    How User Pro grams Work www .emersonct.c om 65 8 How Use r Programs Work 8.1 Program Wind ow Comp onents There ar e 5 major compo nents to th e Progr am View o r programmi ng wind ow. Thes e componen ts are th e Program Paramet ers, Progr am Too lbar, Ins tructio n List, Red Dot Error Bar , and th e Code Wind ow. Figure 1 02 poin ts out th e compon ...

  • Emerson P/N 400361-00 - page 80

    66 www .emersonct.c om SM-EZM otion Module User Gu ide 8.2.4 Run Anytime Enable The SM-E Z Motion progra mming environ ment has b een designed to automati cally stop a ll user prog rams whe n a fault occu rs (regardl ess of what typ e of fault), or when the drive is disab led. Some appli cations requir e the abil ity to run a progr am as s oon as a ...

  • Emerson P/N 400361-00 - page 81

    How User Pro grams Work www .emersonct.c om 67 delete onl y a sing le boo kmark, place the cu rsor on the line for which y ou wish to d elete th e bookmark , and cli ck on the Book Mar k icon . 8.3.9 Red Dot He lp If a user program c ontain s an error, th e rea ltime progr am parser wi ll detect it, and place a r ed do t next to th e line of code w ...

  • Emerson P/N 400361-00 - page 82

    68 www .emersonct.c om SM-EZM otion Module User Gu ide 8.4 Program Instruction List Figur e 105: Program Inst ruction L ist 8.4.1 Program Flow Instructions 8.4.1.1 If/Then/EndIf This is a progra m flow con trol instruc tion use d to sele ctively run a s ection of code o nly i f a log ical tes t conditio n is true. I f the tes t evalua tes to tru e ...

  • Emerson P/N 400361-00 - page 83

    How User Pro grams Work www .emersonct.c om 69 valid r ange fo r the num bers prov ided i s 0 to 214 7483647 . Example: For Count = 1 to 5 Index.1.Initiate Dwell For Time 1.000 'seconds Next Example: For Count = 1 To 10 Wait For ModuleInput.1 = ON Index.0.Initiate Wait For Index.AnyCommandComplete EZOutput.1=ON Wait For Time 1.000 'second ...

  • Emerson P/N 400361-00 - page 84

    70 www .emersonct.c om SM-EZM otion Module User Gu ide picks up where i t left o ff in the pr ogram t hat calle d it. This is often u sed wh en a se ction of code i s use d in mult iple places in a prog ram. By moving t he code to another program an d then call ing th at program , the to tal num ber of program lines c an be reduced . This can also ...

  • Emerson P/N 400361-00 - page 85

    How User Pro grams Work www .emersonct.c om 71 GoTo RunIndex2: 'Go to RunIndex2 label EndIf RunIndex1: Index.1.Initiate GoTo EndLoop: RunIndex2: Index.2.Initiate EndLoop: Wait For Index.AnyCommandComplete Loop See the La bel: i nstruct ion for ad ditio nal examp les. 8.4.2 Motion Instructions 8.4.2.1 Dwell For Time This m otion in struc tion i ...

  • Emerson P/N 400361-00 - page 86

    72 www .emersonct.c om SM-EZM otion Module User Gu ide (Index.0 .Initia te or Inde x.0.Com poundIniti ate), not the index it self, determ ines whet her or n ot the i ndex will execute a decelerati on ramp. F or examp le, Index.0 can be used multi ple times in mul tiple prog rams. It can be in itiate d at differ ent times using the Index. 0.Initiate ...

  • Emerson P/N 400361-00 - page 87

    How User Pro grams Work www .emersonct.c om 73 Example: Gear.Initiate Wait for EZInput.2=ON Gear.Stop This ins tructio n shou ld not be used within a loop in the us er program. If th e Gear.Ini tiate ins truction is proc essed whi le gearing is acti ve, the pr ogram wl l hang on this i nstruc tion. 8.4.2.1 2 Profile.ProfileStop Profil e.Profil eSto ...

  • Emerson P/N 400361-00 - page 88

    74 www .emersonct.c om SM-EZM otion Module User Gu ide PowerTool s Pr o into "Re d Dot Hel p Mode ". Whil e in thi s mode, t he mouse p ointer s hould hav e a red a nd yel low question mark ne xt to it. After goin g into Red D ot Help Mode, sim ply clic k on th e line of th e prog ram that ha s a red dot next to it. S ome desc ription of ...

  • Emerson P/N 400361-00 - page 89

    How User Pro grams Work www .emersonct.c om 75 Figur e 107: Time Sl icing Dia gram In Figure 107, the Update R ate repres ents the T rajector y Update R ate that the user selects on the Setup vi ew. The first rout ine to b e proce ssed in the upda te is the control loop upda te. Next , all m essages will be handle d. If no message has been sent fro ...

  • Emerson P/N 400361-00 - page 90

    76 www .emersonct.c om SM-EZM otion Module User Gu ide (tasks ) are bloc ked. Figure 109: Multita sking Flow Cha rt t = 0 Contr ol Loop Update Messa ge(s) W aiti ng? End Of Updat e? Ta s k Blocked? Proc ess Messag e(s) Proc ess Ta s k Switch to Next T ask Switch to Next T ask Ye s No Ye s No No Ye s ...

  • Emerson P/N 400361-00 - page 91

    S tarting and S topping M otion www .emerson ct.com 77 9 Starting and Stopping Motion 9.1 Starting Moti on All of the mo tion typ es des cribed in “ How Mot ion Work s” on page 23 can be i nitiat ed using multiple methods . The two differen t method s are from assi gnment s, and fro m user programs . The f ollowing section details how eac h of ...

  • Emerson P/N 400361-00 - page 92

    78 www .emer sonct.com SM-EZMo tion Mo dule User Guide an edge-s ensitiv e assig nment mean ing that the home will start on the risi ng edg e of the Source signa l. If the Home.#. Initiate Des tinat ion is he ld ac tive, the H ome wil l not initi ate agai n until t he nex t rising ed ge. 9.1.1.5 Index.#.Initia te The Index.# .Initia te Destina tion ...

  • Emerson P/N 400361-00 - page 93

    S tart ing and S topping Motion www .emersonc t.com 7 9 Example 1 : Index.0.CompoundInitiate 'Dist=10, Vel=100, Accel=100, Decel=100 Index.1.CompoundInitiate 'Dist=20, Vel=500, Accel=5000, Decel=5000 Index.2.Initiate 'Dist=30, Vel=1000, Accel=10000, Decel=10000 Figure 11 1: Compound In dex Example 1 Example 2 : Index.2.CmpoundInitiat ...

  • Emerson P/N 400361-00 - page 94

    80 www .emer sonct.com SM-EZMo tion Mo dule User Guide It is imp ortant to u ndersta nd that w hen co mpounding indexes togethe r, the ac celera tion an d dece leration will override the ind ex dist ance. Fi gure 112 above shows the scenar io where the fina l inde x in the c ompoun d strin g has a short dis tance and a slow acc elerati on ramp. Ind ...

  • Emerson P/N 400361-00 - page 95

    S tart ing and S topping Motion www .emersonc t.com 8 1 On Prof ile.1 mod ifier mu st be a dded to the Jog.S top comma nd. If this in structi on is us ed while ge ar mot ion is no t active, it will be i gnored, a nd the pro gram wil l move to the next instruc tion. 9.2.2.2 Gear.St op The Gear .Stop com mand i s used to stop g earing m otion that is ...

  • Emerson P/N 400361-00 - page 96

    82 www .emer sonct.com SM-EZMo tion Mo dule User Guide ...

  • Emerson P/N 400361-00 - page 97

    S tarting and S topping P rograms www .emersonct.c om 83 10 Starting and Stopping Programs 10.1 Starting Programs The use r can in itiate progra ms usin g multipl e differe nt methods. T he fo llowing sec tion d escribes how progra ms can be in itiate d from As signme nts, from Prog rams, an d from Pow erTool s Pro wh ile onli ne with the syst em. ...

  • Emerson P/N 400361-00 - page 98

    84 www .emersonct.c om SM- EZ Motion Modul e User Guide again. 10.2.3.2 Stop All - Pr ogram Toolbar Motion and Progr ams can also be s topped fr om the Progra m Toolb ar usin g the St op All icon. T his ic on is li ke an edge s ensitiv e function that wi ll not pr event moti on or program s from b eing ini tiated a gain. ...

  • Emerson P/N 400361-00 - page 99

    Paramet er Descripti ons www .emerso nct.com 85 11 Parameter Descriptions This sec tion l ists all p rogramm able a nd feed back paramete rs avai lable. T he param eters ar e li sted alphabeti cally b y variable name ( shown in i talics be low the on screen n ame) a nd give a de scrip tion. Ran ge is dyn amic and depend s on Us er Unit scaling . Th ...

  • Emerson P/N 400361-00 - page 100

    86 www .emer sonct.com SM-EZMo tion Mo dule User Guide the corr espondi ng bit location of BitRegi ster.#.V alue (b y setting th e bit locati on to 1) o r to clear the curren t data in BitRegis ter.#.Va lue ( by settin g the bit l ocation t o 0). Unidrive S P Braking Resistor O verload Ac cumulator BrakeOverloadAccumulator This p arameter give s an ...

  • Emerson P/N 400361-00 - page 101

    Parame ter Descripti ons www .emersonc t.com 87 units, at the time whe n Captur eTrigge red activa ted. Captured M aster Po sition Homed Captured.#.CapturedMasterPosHomed On the ris ing edge o f the Cap ture Activ ate event , the master a xis posit ion is captur ed (in c ounts). The c aptured counts val ue is then conver ted into M aster Di stance ...

  • Emerson P/N 400361-00 - page 102

    88 www .emer sonct.com SM-EZMo tion Mo dule User Guide Accele rating, A t Veloc ity, and De celerat ing. Deceler ating follows t he acc elerati ng segme nt and th e At V eloci ty segme nt. When i ndexe s are c ompound ed to cr eate a complex motio n profil e, only the las t index may contain a decelerati ng segme nt. Define Home DefineHome This de ...

  • Emerson P/N 400361-00 - page 103

    Parame ter Descripti ons www .emersonc t.com 89 conside red activ e in the SM- EZMotion fi rmware. Onc e the input h as been ac tive for th e deboun ce time , a rising ed ge on the inp ut will oc cur in the SM -EZMotion modul e. This paramete r can be found o n the EZM otion I /O Setup view. EZInput Force EZInput.#.Force The dig ital inpu ts on th ...

  • Emerson P/N 400361-00 - page 104

    90 www .emer sonct.com SM-EZMo tion Mo dule User Guide FeedRate Override fea ture. Whe n Feed Rate Deacti vate is enable d, FeedRate Ove rride will be di sabl ed and all index or home m otion wil l operate at its pr ogramme d veloc ity. When Fe edRate De activat e is dis abled, Feed Rate Override wi ll be ena bled, a nd ind ex and hom e motion i s ...

  • Emerson P/N 400361-00 - page 105

    Parame ter Descripti ons www .emersonc t.com 91 Gear.De cel func tions o nly w hen the fo llower is ram ping its speed dow n after the gea ring functi on has tur ned off. Gear Dece l Enable Gear.Dece lEnable Gear.Decel Enable i s a Desti nation tha t when i t is "on" allows a gear to run a s pecifie d dece l ramp af ter the gearing comman ...

  • Emerson P/N 400361-00 - page 106

    92 www .emer sonct.com SM-EZMo tion Mo dule User Guide Home Initiate Home.#.Initiate When a ctivated , this des tination will initiate t he spe cified home. H ome will n ot initia te if an index, j og, program , or stop is curren tly ac tive. Home Limit Distance Home.#.LimitDist This p arameter pl aces an upper limit on the incr ementa l distanc e ...

  • Emerson P/N 400361-00 - page 107

    Parame ter Descripti ons www .emersonc t.com 93 Index Profile Limited Index.ProfileLimited For timed indexes , if the values for Max. Velocit y, Max. Accele ration an d Max. Dec elerati on are s uch that th e distanc e cannot b e cover ed in the s pecifie d time, the Index. ProfileL imited fl ag wil l activ ate when the index is initiated . The Ind ...

  • Emerson P/N 400361-00 - page 108

    94 www .emer sonct.com SM-EZMo tion Mo dule User Guide Ind ex In itia te Index.#.Initiate The Inde x.#.Ini tiate d estinatio n is us ed to in itiate the specifi c inde x. The Index is initi ated on the rising edge o f this function. An Inde x cannot be initia ted if there is an Home , Jog , or Prog ram in prog ress , or if t he St op destinati on o ...

  • Emerson P/N 400361-00 - page 109

    Parame ter Descripti ons www .emersonc t.com 95 registrat ion poi nt for regi stra tion type index es. Index Time Base Index.#.TimeBa se The time base selects either re altime , which al lows velo cities, acceler ation and decel eration to be ba sed on real time, or sync hronized, whi ch allows for an extern al synchr onizati on signa l. Index Time ...

  • Emerson P/N 400361-00 - page 110

    96 www .emer sonct.com SM-EZMo tion Mo dule User Guide Jog.#. MinusActi vate o r Jog.#.P lusAct ivate in struct ions, and using the Jo g.Stop w ill caus e the motor to decel erate to a stop a t the Jog.# .Decel r ate for the jog th at is act ive. Jog Acceleration Jog.#.A ccel This p arameter is the aver age a ccelerati on ramp fo r the specifi c jo ...

  • Emerson P/N 400361-00 - page 111

    Parame ter Descripti ons www .emersonc t.com 97 Master A xis Feed back Se lector MasterAx is.SpeedF eedbackS elector The Mas terAxis.Spe ed Fe edback S elector pa ramete r determin es whe re the fee dback de vice for the ma ster signal is con nected to. E arly rel ease s of the SM-EZ Motio n module on ly supp ort a val ue of Slo ts 1, 2, or 3 (an d ...

  • Emerson P/N 400361-00 - page 112

    98 www .emer sonct.com SM-EZMo tion Mo dule User Guide is not be tween the On and O ff positi ons, and inactiv e whenever the axis is between the two pos itio ns. However, the PLS.# .Status will not turn o n until i t reaches th e OnPosn the firs t time. PLS On Point PLS.# .OnPosn PLS.# .Status wi ll be ac tive wh en the sel ected so urce position ...

  • Emerson P/N 400361-00 - page 113

    Parame ter Descripti ons www .emersonc t.com 99 SM-EZMotion Power Up Count PowerUpCount Power Up Count is the current value of ho w many times the SM-EZMo tion mo dule h as been po wered up. Each time power is cycled to the sy stem, thi s number incremen ts by one. This paramete r is store d in the SM- EZMoti on module, and is n ot reset if the mod ...

  • Emerson P/N 400361-00 - page 114

    100 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Program Any Complete Program.AnyComplet e This sou rce is act ivated when any program ends normal ly. If a pro gram end s due to a fault or the stop desti nation , this source does not act ivate. Dea ctivates wh en any program is initi ated. Pro gra m Init iate Program.#.Init iate Wh ...

  • Emerson P/N 400361-00 - page 115

    Paramet er Descriptio ns www .emer sonct.com 101 the queue a nd re main inac tive unti l all da ta has bee n removed from the queue. Queue Ex it Queu e.# .Queu eExi t This even t activat es when the source p arame ter is eq ual to the Queue Exit Positio n. Queue E xit deac tivates when the Queue Rem ove i nstruct ion is p roce ssed. Queue Ex it Pos ...

  • Emerson P/N 400361-00 - page 116

    102 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Error Cod e for the s pecific e rror. This paramete r can be seen w hile o nline wit h Power Tools Pro EZ on the Errors view. For detail s on t he specific error c ode, refe r to the us er guide for the partic ular option mod ule. Slot 2 Error St atus Slot2. ErrorS tatus If the Unidr ...

  • Emerson P/N 400361-00 - page 117

    Paramet er Descriptio ns www .emer sonct.com 103 the Un idrive SP slots. The X in “ SlotX” def ines t he slot nu mber that the SM-Univ ersal Encoder P lus option module ha s been fitted in. For exampl e, if th e Univ ersal Enco der Plu s modu le is i n slot 2, th e paramet er wou ld be name d: Slot2. Enco derSimu lation Source . The SM-U nivers ...

  • Emerson P/N 400361-00 - page 118

    104 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide (pins 2 , 3, and 4 ) are co nfigured as Inpu ts or Ou tputs u sing PowerTool s Pro E Z softwa re. The Sl otX.IO.#.D irectio n paramete r is used t o configu re whe ther the I/ O point acts as a digital input or digital output. Valid ent ries for th is paramete r are selI nput or selO ...

  • Emerson P/N 400361-00 - page 119

    Paramet er Descriptio ns www .emer sonct.com 105 add a lev el of pro tection from exceedi ng the machines travel li mits. The Softw areTra velL imitMinu sAct ive source (output fu nction) is active when the SoftwareT ravelLi mitMi nusPosn is reac hed or e xcee ded. Motion is halte d using t he Travel Limit Decel when ever a hardwar e or soft ware t ...

  • Emerson P/N 400361-00 - page 120

    106 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Bit 13 = Pa ra mete r 10. 14D ire ction Run nin g Bit 12 = Paramete r 10.1 3Direct ion Comm anded Bit 11 = Paramete r 10.12B raking Resistor A larm Bit 10 = Paramete r 10.11B raking IGBT Activ e Bit 9 = P arame ter 10.10 Regener ating Bit 8 = P arameter 10.09D rive Outp ut Is At Cu r ...

  • Emerson P/N 400361-00 - page 121

    Paramet er Descriptio ns www .emer sonct.com 107 SPIO Name SPIO.#.N ame Each digital I /O point o n the Un idrive SP c an be g iven a name. Th e name can be us ed in a us er prog ram to reference a speci fic I/O p oint. The name c an be up to 12 alphanume ric ch aracter s, but mu st begi n with a non-nume ric ch aracter. SPIO State SPIO.#.Out The f ...

  • Emerson P/N 400361-00 - page 122

    108 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Unidrive SP Pow er Up Time – Yrs.Days SPPower UpTimeY earsDa ys The Drive Po wer Up Time is the ti me elapsed s ince power has been cycled to the Un idrive SP. Th e format fo r this paramete r is Ye ars.Day s and Hour s.Minute s. Thes e valu es must be us ed in comb inati on to fin ...

  • Emerson P/N 400361-00 - page 123

    Paramet er Descriptio ns www .emer sonct.com 109 12kHz, an d 14kH z. SM-EZMotion T otal Power Up T ime TotalPowerUpTime Total Power Up Time is t he total el apsed tim e that th e SM-EZM otio n module h as bee n powered up (sin ce re set by the fac tory). The units for the parame ter are Hour s with a resoluti on of 0. 1 Hours. Th is pa rameter is s ...

  • Emerson P/N 400361-00 - page 124

    1 10 www .eme rsonct.co m SM-EZM otion Module User Guid e V elocity Loop Bandwid th VelocityLoopBandwidth The Velocity Loop Ban dwidth param eter is the theoretic al bandwidth of the vel ocity contr oller (how fast the sys tem can res pond to chan ge in ve loci ty comman d). The v alue of this param eter d epends he avily o n the cor rect va lues f ...

  • Emerson P/N 400361-00 - page 125

    Dr iv e Pa ra m et er s U se d b y S M- EZ Mo t ion M odu l e www . eme rs o nc t. co m 1 1 1 12 Drive Parameters Used by SM-EZMotion Module 12.1 Description The Unid rive S P is co nfigured using a datab ase of paramete rs. The pa ramete rs are gr ouped ac cording to functiona lity. Ea ch functi on gro up is given a Menu#. Each paramete r in the d ...

  • Emerson P/N 400361-00 - page 126

    1 12 www .eme rsonct.co m SM-EZM otion Module User Guid e Menu 1 Menu 2 Menu 3 Menu 4 Menu 5 Menu 6 Menu 7 Menu 8 Men u 9 Menu 10 M enu 11 Speed Ref. Ramps Fdbk Setup Cur rent Control Moto r Control Sequencer Analog I /O Digital I/O Logic / Mot. Pot Sta tus / Tri ps General Drv Setup 8.0 1 1 10. 01 1 2.0 2 2 3.02 5 8.0 2 1 10. 02 1 8.0 3 1 4.04 1 8 ...

  • Emerson P/N 400361-00 - page 127

    Dr iv e Pa ra m et er s U se d b y S M- EZ Mo ti on Mo du l e www .e me rs on ct .c o m 1 1 3 Menu 12 Menu 13 Menu 14 Menu 15 Menu 16 Menu 17 Menu 18 Menu 19 Menu 20 Menu 21 Threshold / Var Slct r Posn Cont rol User PID Controller Option Modu le 1 Option Mo dule 2 Option Mo d ul e 3 User Vars 1 U ser Vars 2 User Var s 3 2nd Motor Setup 18. 31 6 19. ...

  • Emerson P/N 400361-00 - page 128

    1 14 www .eme rsonct.co m SM-EZM otion Module User Guid e Notes: 1.The SM -EZMot ion modul e reads this par ameter fo r display purp oses in PowerT ools Pr o Soft ware. Pr imary use is f or diagn ostics. 2. These p arameter s are se t to a sp ecific val ue every time the system is po wered up. Th is para meter must n ot be changed, or the system ma ...

  • Emerson P/N 400361-00 - page 129

    Dr iv e Pa ra m et er s U se d b y S M- EZ Mo ti on Mo du l e www .e me rs on ct .c o m 1 1 5 Example : x.13 – EZOutput.1.Statu s This par ameter s hows the s tatus of di gital O utput #1 on t he SM-EZMo tion mo dule. A v alue of 1 indicates that th e Output is active. A valu e of 0 indi cates tha t the Outp ut is inactiv e. This equate s Pin # 6 ...

  • Emerson P/N 400361-00 - page 130

    1 16 www .eme rsonct.co m SM-EZM otion Module User Guid e Example s: x.48 = 11 023 wou ld signi fy that us er prog rams are curren tly runn ing on Tas k 2 and Task 1, and that a Ind ex is running on Profi le 1 whil e a Jog is run ning on Profil e 0. x.48 = 104 would sign ify tha t a user prog ram is runn ing on Task 0 and Geari ng motion i s runnin ...

  • Emerson P/N 400361-00 - page 131

    Diagnostic s www .emerso nct.com 1 17 13 Diagnostics There are ma ny differe nt tools ava ilable to the user to help diagnose prob lems or errors i n the Un idrive SP and SM-EZMo tion mo dule. T he most commo n tools used ar e the Error Codes, An alog Out puts, a nd Power Tools Pro utilitie s such a s the Watc h Window, Fault Vi ew, Status Bar, and ...

  • Emerson P/N 400361-00 - page 132

    1 18 www .eme rsonct.co m SM-EZM otion Module User Guid e 104 Y F ollowing Error Amount of following error exceeded following error limit set in PowerT oo ls Pro softwar e. Increase Following Error Limit in PowerT ools Pro configuration. Increase V elocity Loop Bandwid th and/or Position Loop Bandwidth in PowerT ools Pro configuration. Lower A ccel ...

  • Emerson P/N 400361-00 - page 133

    Diagnostic s www .emerso nct.com 1 19 135 Y Program Error - Math Addition Overflow Math addition operation in user program has re sulted in an over flow of the resultant p arameter V erify that the sum of all the operands in addition formulas will not result in a value in the following range: -2 31 < SUM < 2 31 -1 136 Y Program Error - Math D ...

  • Emerson P/N 400361-00 - page 134

    120 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide 13.2 Analog Outp uts The Unid rive SP h as two Ana log Outpu ts that ca n be configur ed to repr esent any base drive pa rameter (00.00 - 21.51). The defaul t configu ration fo r the tw o drive analog outputs ar e Speed Feedb ack (3.02) and Act ive Curren t (4.02). Usi ng this meth o ...

  • Emerson P/N 400361-00 - page 135

    Diagnosti cs www .emers onct.com 121 Figur e 114: Watch Window Example To setu p the Wat ch W indow, se lect To ols > W atch Window from the P owerTools Pro me nu bar. If not online with th e module, Wa tch Wi ndow will be a gr eyed- out choice on the menu. U pon se lecting W atch Wi ndow, th e Sele ct Driv e Paramet ers wind ow will ap pear. Th ...

  • Emerson P/N 400361-00 - page 136

    122 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Figur e 116: SM-EZMotion Error Po p-Up Win dow The Erro rs View al so conta ins a T rip Log th at lists the 10 most recen t drive trips. Trip 0 is li sted as th e most r ecent fault with a Trip Time in Years. Days and H ours.Mi nutes format. A long with t he Trip Cod e, the Tr ip Lo ...

  • Emerson P/N 400361-00 - page 137

    Diagnosti cs www .emers onct.com 123 Figu re 119 : St atus O nlin e Tab Many of th e view s in Po werToo ls Pr o have Onli ne tab that contain p arameter s rela ted to th at View whe n onli ne with the driv e. 13.4 Clearing SLX.dF trip after installing SM-EZMo tion module After inst alling a SM -EZMotion module fo r the first time, the Unidrive S P ...

  • Emerson P/N 400361-00 - page 138

    124 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide ...

  • Emerson P/N 400361-00 - page 139

    Creating a Custom Motor File www .emerso nct.com 125 14 Creating a Custom Motor File PowerT ools Pr o EZ s oftware ob tains the name s and paramete rs of al l motors in the Motor T ype list box fro m various M otor Data D efinit ion Files ( .DDF file ex tension) . The list o f defaul t (or stan dard) mo tors is au tomatic ally loaded du ring the Po ...

  • Emerson P/N 400361-00 - page 140

    126 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Motor Defi nition Section The moto r defini tions section contai ns the na mes an d paramete rs of on e or mor e user defined motor s. The or der of the p arameters in the motor defi nition mu st mat ch the example in Figu re 120. The motor p arame ters do no t define wit h whic h dr ...

  • Emerson P/N 400361-00 - page 141

    Creating a Custom Motor File www .emerso nct.com 127 maxOperatingSpeed Specifi es the max imum ope ratin g speed of the moto r. It is used by the driv e to limit the Vel ocit y Command. Th e valid range for th is pa rameter is 0.0 to 40,000.0 RPM. thermalTimeC onstant Specifi es the T hermal T ime Cons tant of the motor. This paramete r is used by ...

  • Emerson P/N 400361-00 - page 142

    128 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide ...

  • Emerson P/N 400361-00 - page 143

    Glossary www .emers onct.com 129 15 Glossary µs Microsec ond, wh ich is 0.00000 1 second s. A Amps. Amplifier Serv o Drive . ARMS Amps Roo t Mean S quared (R MS). Axis The full system to cont rol in a single motor sha ft. A single SM-EZMo tion mo dule wi th Unidri ve SP Dri ve can denote an axis. AWG Americ an Wir e Gaug e. Baud Rate The numb er o ...

  • Emerson P/N 400361-00 - page 144

    130 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide Global Where Am I PowerTool s feat ure that i ndica tes whic h line of w hich user prog ram is e xecutin g. Home Routine The home provid es mot ion in app lica tions in which the axis mu st prec isely a lign w ith so me part of a mac hine. Hysteresis For a syste m with an a nalog inp ...

  • Emerson P/N 400361-00 - page 145

    Glossary www . emerson ct.com 131 Views. PC Person al Compute r. PE Protect ive Ea rth. PID Propor tional- Integral- Deriva tive. An acrony m that describe s the com pensat ion stru cture th at can be used in many clos ed-lo op systems . PLC Progra mmable Lo gic Co ntrolle r. Also known as a program mable contr oller, these dev ices are use d for m ...

  • Emerson P/N 400361-00 - page 146

    132 w ww . eme rs on c t. co m SM -E ZM otion Mod ule User Gu ide ...

  • Emerson P/N 400361-00 - page 147

    Index www .eme rsonct.com 133 A Abso lute In dex, 25 AbsolutePositio nValid, 85 Accelerating, 85 AccelType, 85 AccelUnits.Decimal, 85 AccelUnits.TimeScale, 85 Assign ments View, 52 AtVel, 85 B Bit.B #, 85 Bi tRegi ster .#. Val ue, 85 BitRegister.#.Valu eMask, 85 BrakeOverloadAccu mulator, 86 BrakeResistorAlarm, 86 BusVoltage , 86 C Captur e View, 4 ...

  • Emerson P/N 400361-00 - page 148

    134 ww w .em e rs on ct. c om S M -EZ Moti on Mo dule Us er G uide Gear.Activate, 90 Gear.AtVel, 90 Gear.Com mandComplet e, 90 Gear.Command InProgrees, 90 Gear.Decel, 90 Gear.DecelEnable, 91 Gear.Decelerating, 91 Gear.RecoveryDist , 91 Gearing, 28 Gearing View, 63 H Hardware.S lotXModuleType, 91 Home to Marker, 2 3 Home to S ensor, 24 Home to Senso ...

  • Emerson P/N 400361-00 - page 149

    Index www .eme rsonct.com 135 M Master Po sition Filt er Samp les, 39 Master Units Setup View, 38 MasterAxis .MasterEncRevCo unt, 96 MasterAxis.MasterEncR evPosition, 96 MasterAxis.SpeedFeedbackSelector, 9 7 ModuleSeri alNumber, 97 ModuleTempe rature, 97 Mot ion Ti meba se, 28 Moti onStop , 9 7 MotorType, 9 7 N Name, 97 O OverloadAccumulator, 97 P ...

  • Emerson P/N 400361-00 - page 150

    136 ww w .em e rs on ct. c om S M -EZ Moti on Mo dule Us er G uide SlotX .En coder Simul ati onNu merat or, 102 SlotX.Enco derSimulation Source, 102 SlotX.Enco derSupplyV oltage, 10 3 SlotX.Enco derType, 103 SlotX.In put.#.In , 103 SlotX.In put.#.Name, 103 SlotX.IO.# .Direction, 103 SlotX.IO .#.In, 10 4 SlotX.IO.#.Name, 104 SlotX.IO.#.Out, 104 Slot ...

  • Emerson P/N 400361-00 - page 151

    ...

  • Emerson P/N 400361-00 - page 152

    Since 1979 , the “Motion Mad e Easy” products, designed and manufactured in Minnesota U.S.A., are renowned in the motion control industry for their ease of use, reli ability and hi gh performa nce. For mor e informati on about Co ntrol Tec hni ques “Motion Made Easy” products and services, call (800) 397-3786 or contact our website at www.e ...

Manufacturer Emerson Category Computer Hardware

Documents that we receive from a manufacturer of a Emerson P/N 400361-00 can be divided into several groups. They are, among others:
- Emerson technical drawings
- P/N 400361-00 manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson P/N 400361-00
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson P/N 400361-00.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson P/N 400361-00, service manual, brief instructions and user manuals Emerson P/N 400361-00. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson P/N 400361-00.

Similar manuals

A complete manual for the device Emerson P/N 400361-00, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson P/N 400361-00 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson P/N 400361-00.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson P/N 400361-00 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson P/N 400361-00, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson P/N 400361-00, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson P/N 400361-00 - which should help us in our first steps of using Emerson P/N 400361-00
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson P/N 400361-00
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson P/N 400361-00 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson P/N 400361-00?

Use the form below

If you did not solve your problem by using a manual Emerson P/N 400361-00, ask a question using the form below. If a user had a similar problem with Emerson P/N 400361-00 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)