English dropdown-ico

Manual CDA HG6310

24 pages Not applicable
Download

Go to site of 24

Summary
  • CDA HG6310 - page 1

    Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu hg6300 , hg6310 & hg6320 Gas Hobs Manual for Installation, Use and Maintenance ...

  • CDA HG6310 - page 2

    2 Important The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that we reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appliance is not designed to be used by people (includi ...

  • CDA HG6310 - page 3

    3 safety (L VD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109 . IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection ...

  • CDA HG6310 - page 4

    4 • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e. g. heating rooms) should be considered incorrect and potentially dangerous. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance. ...

  • CDA HG6310 - page 5

    5 Using Y our Hob Fig. 1 Gas burners: Gas flow to the burners is controlled by the control knobs (5, 6, 7 and 8 on the diagrams on pages 6 & 7). There are 3 positions shown on the control panel. T urning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function ...

  • CDA HG6310 - page 6

    6 g hg6300 Fig. 2 hg6310 Fig. 3 3 3 3 3 2 1 4 4 5 6 7 8 5 6 7 8 ...

  • CDA HG6310 - page 7

    7 K ey to Figs 2, 3 & 4 Gas burners: 1. T riple burner 3.5k W 2. R apid burner 3. 0k W 3. Semi-Rapid burner 1. 75k W 4. Auxiliary burner 1. 0k W Control panel: 5. Front left burner control knob 6. Back left burner control knob 7 . Back right burner control knob 8. Front right burner control knob These appliances are class 3 hg6320 Fig. 4 3 1 4 ...

  • CDA HG6310 - page 8

    8 Igniting the Burners The hob is fitted with a flame failure device. Flame failure devices operate by shutting o the supply of gas to the burner in the event that the flame is extinguished accidentally . T o ignite the burners, follow these instructions: 1. Lightly press the control knob down and turn the knob anticlockwise to the maximum po ...

  • CDA HG6310 - page 9

    9 Fig. 6 Ecient Use of Y our Hob The hob is equipped with burners of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most ecient use of the hob is shown below , where the pan and burner are correctl ...

  • CDA HG6310 - page 10

    10 Correct Use of the Optional W ok P an Adaptor (hg6310 & hg6320 only) The wok pan adaptor is a special stand that is designed to be fitted over the triple ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the triple ring burner as shown in Fig.5. IMPORT ...

  • CDA HG6310 - page 11

    11 Care and Maintenence As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Stainless steel can be eectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine ...

  • CDA HG6310 - page 12

    12 T otal rated gas input : 7 .5kW (hg6300) 8. 0kW (hg6310 & hg6320) Mains electrical voltage: 230 – 240V ac, 50Hz T otal rated electrical consumption: <1W If Y our Hob is Not W orking 1. Check that the mains supply has not been switched o . 2. Check that the fuse in the spur has not blown. 3. Ensure that the burner components are not e ...

  • CDA HG6310 - page 13

    13 Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y B Y A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSE SPUR OUTLET AND PROTECTED B Y A 3A FUSE. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T ...

  • CDA HG6310 - page 14

    14 Gas Supply R equirements IMPORT ANT : THIS APPLIANCE SHOULD BE FITTED B Y A GAS SAFE REGIS TERED FITTER OR OTHER SUIT ABL Y QU ALIFIED PERSON. •  ThisinstallationmustcomplywiththeGasSafety(installationand use) R egulations 1984. •  ThisapplianceiscategoryII2H3+andisdesigned ...

  • CDA HG6310 - page 15

    15 Room V olume (m 3 ) 5 6 to 10 6 to 11 11 or more Air V ent Required (cm 2 ) 100 50 No permanent vent required if a door opens to the outside None required V entilation All rooms require a window or equivalent (e.g. a door) which can be opened. Some rooms require a permanent vent in addition to a win- dow (see below). This unit must not be used i ...

  • CDA HG6310 - page 16

    16 Natural Gas to LPG Conversion This hob can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar , or butane operation at a nominal inlet pressure of 28/30mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). Instructions to t replacement injectors: 1. Di ...

  • CDA HG6310 - page 17

    17 LPG to Natural Gas Conversion This hob can be converted from propane operation at a nominal inlet pressure of 37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural gas at 20mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). R equired: •7mmAFnutspin ...

  • CDA HG6310 - page 18

    18 Fitting the Hob Unpacking the hob: T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 150mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 100mm if the adjacent surface is resistant to ...

  • CDA HG6310 - page 19

    19 Fig. 11 15mm V entilation slot > 30mm withstanding temperatures 65°C above ambient or greater (typically 80-90°C). •  If there is no oven to be built in below the hob it is recommended that, an isolation shelf should be fitted to protect the user from high temperatures. If the hob is to be installed above a working drawer , then a ...

  • CDA HG6310 - page 20

    20 2. Position the hob seal, as shown in the diagram below (Fig. 14), ensur - ing that the ends meet without overlapping. Do not use silicone type sealant. 3. Secure the hob to the worktop using the fixing brackets and screws supplied, as shown in the following diagram (Fig. 15). R emove any ex cess sealant after tightening the brackets. 400mm 750 ...

  • CDA HG6310 - page 21

    21 NO TES: ...

  • CDA HG6310 - page 22

    22 NO TES: ...

  • CDA HG6310 - page 23

    23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice. NO TES: ...

  • CDA HG6310 - page 24

    Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu © CDA 2014 ...

Manufacturer CDA Category Stove

Documents that we receive from a manufacturer of a CDA HG6310 can be divided into several groups. They are, among others:
- CDA technical drawings
- HG6310 manuals
- CDA product data sheets
- information booklets
- or energy labels CDA HG6310
All of them are important, but the most important information from the point of view of use of the device are in the user manual CDA HG6310.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals CDA HG6310, service manual, brief instructions and user manuals CDA HG6310. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product CDA HG6310.

Similar manuals

A complete manual for the device CDA HG6310, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use CDA HG6310 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of CDA HG6310.

A complete CDA manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual CDA HG6310 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the CDA HG6310, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the CDA HG6310, that we can find in the current document
3. Tips how to use the basic functions of the device CDA HG6310 - which should help us in our first steps of using CDA HG6310
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with CDA HG6310
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of CDA HG6310 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning CDA HG6310?

Use the form below

If you did not solve your problem by using a manual CDA HG6310, ask a question using the form below. If a user had a similar problem with CDA HG6310 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)