English dropdown-ico

Manual ZyXEL Communications EES-1024AF

99 pages 7.21 mb
Download

Go to site of 99

Summary
  • ZyXEL Communications EES-1024AF - page 1

    EES-1024AF Intelligent Ethernet Switch December 2002 User’s Guide ...

  • ZyXEL Communications EES-1024AF - page 2

    EES-1024AF Intelligent Ethernet Switch ii Copyright Copyright Copyright © 2002 by ZyXEL Co mmunications Corporation The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any m eans, electronic, mechanical, magnetic, ...

  • ZyXEL Communications EES-1024AF - page 3

    EES-1024AF Intelligent Ethernet Switch ZyXEL Limited Warranty iii ZyXEL Limited W arranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and upon proof of purchase, should the product ...

  • ZyXEL Communications EES-1024AF - page 4

    EES-1024AF Intelligent Ethernet Switch iv Interference S tatements and W arnings Interference Statements and Warnings FCC Interference St atement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference r ...

  • ZyXEL Communications EES-1024AF - page 5

    EES-1024AF Intelligent Ethernet Switch Customer Support v Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways: Cont acting Customer Support When you contact your customer support representa tive, have the following information ...

  • ZyXEL Communications EES-1024AF - page 6

    ...

  • ZyXEL Communications EES-1024AF - page 7

    EES-1024AF Intelligent Ethernet Switch T able of Contents vii T able of Content s Copyright .................................................................................................................................................................... ii ZyXEL Limited Warranty ................................................................... ...

  • ZyXEL Communications EES-1024AF - page 8

    EES-1024AF Intelligent Ethernet Switch viii T able of Contents 4.2 Establishing the Console Port Connection ................................................................................... ................... 4-1 4.2.1 Initia l Screen ........................................................................................................... .... ...

  • ZyXEL Communications EES-1024AF - page 9

    EES-1024AF Intelligent Ethernet Switch T able of Contents ix 7.12 Port Mirror (Sniffer) ..................................................................................................... ............................... 7-13 7.13 IP Config ............................................................................................................ ...

  • ZyXEL Communications EES-1024AF - page 10

    ...

  • ZyXEL Communications EES-1024AF - page 11

    EES-1024AF Intelligent Ethernet Switch List of Figures xi List of Figures Figure 1-1 Backbone Application ................................................................................................ ............................. 1-4 Figure 1-2 Bridging Application ................................................................................. ...

  • ZyXEL Communications EES-1024AF - page 12

    EES-1024AF Intelligent Ethernet Switch xii List of Figures Figure 7-2 W eb Configurator - Statistics ....................................................................................... ............................ 7-2 Figure 7-3 W eb Configurator - VLAN ............................................................................................ ...

  • ZyXEL Communications EES-1024AF - page 13

    EES-1024AF Intelligent Ethernet Switch List of T ables xiii List of T ables T able 2-1 The LED Descriptions................................................................................................. .............................. 2-2 T able 3-1 EM1024A-8TP LED Description........................................................................ ...

  • ZyXEL Communications EES-1024AF - page 14

    ...

  • ZyXEL Communications EES-1024AF - page 15

    EES-1024AF Intelligent Ethernet Switch List of Diagrams xv List of Diagrams Diagram 1 Internet Explorer 5.0 ..................................................................................................................................A Diagram 2 IE5.0- Internet Options............................................................................. ...

  • ZyXEL Communications EES-1024AF - page 16

    ...

  • ZyXEL Communications EES-1024AF - page 17

    EES-1024AF Intelligent Ethernet Switch Preface xvii Preface Congratulations on your purchase of the EES Series of Intelligent Ethernet Switches. This preface introduces you to the EES Series and discusses the organization and conventions of this User’s Guide. It also provides information on other related documentation. About The EES Series The EE ...

  • ZyXEL Communications EES-1024AF - page 18

    ...

  • ZyXEL Communications EES-1024AF - page 19

    Getting Ready I Part I: Getting Ready This part acquaint s you with the features and applications of the EES-1024AF Intelligent Ethernet Switch, instructs you how to make the hardware connections, understand the front panel LEDs and introduces the SMT (System Management T erminal). ...

  • ZyXEL Communications EES-1024AF - page 20

    ...

  • ZyXEL Communications EES-1024AF - page 21

    EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-1 The EES-1024AF Intelligent Switch is desi gned to provide your network with Ethernet, Fast Ethernet, Gigabit Ethernet connectivity over twisted pair and fiber optic cab ling. Two expansion sl ots on the front panel of the switch further add to the flexibility of your network sy ...

  • ZyXEL Communications EES-1024AF - page 22

    EES-1024AF Intelligent Ethernet Switch 1-2 Getting to Know the EES 1024 • IGMP and Sniffer (Port Mirr oring) supported • Port Priority - 802 .1p & TOS (Type of Service) supported • Static Address Table for manual address addition • Broadcast Storm Filter function supported • Firmware upgradeable through TFTP 1.3 Package Content s Comp ...

  • ZyXEL Communications EES-1024AF - page 23

    EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-3 1.4.3 SNMP Network Management Simple Network Management Protocol is a protocol u sed for exchanging management information between network devices. SNMP is a member of the TCP/IP protoc ol suite. This switch supports SNMP agent functionality, which allows a manager station to m ...

  • ZyXEL Communications EES-1024AF - page 24

    EES-1024AF Intelligent Ethernet Switch 1-4 Getting to Know the EES 1024 Figure 1-1 Backbone Application 1.5.2 Bridging Example For enterprise networks where large data broadcasts are c onstantly processed, the switch is an ideal solution for department users to connect to the corporate backbone. Used as segment switch, the switch can alleviate user ...

  • ZyXEL Communications EES-1024AF - page 25

    EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-5 Figure 1-2 Bridging Application Full-duplex mode operation only applies to point-to-point access (for example, when attaching the switch to a workstation, server, or another switch). When connecting to hubs, use a standard cascaded connection set for half-duplex operation. 1.5. ...

  • ZyXEL Communications EES-1024AF - page 26

    EES-1024AF Intelligent Ethernet Switch 1-6 Getting to Know the EES 1024 Figure 1-3 High Performance Switched Workgroup Application 1.5.4 IEEE 802.1Q VLAN Application The switch supports up to 4095 tag-based IEEE 802.1Q-compatible virtual LAN (VLANs). T ag-based VLAN Workgroup You can group the switch ports into broadcast domains by assigning them t ...

  • ZyXEL Communications EES-1024AF - page 27

    EES-1024AF Intelligent Ethernet Switch Getting to Know the EES 1024 1-7 Figure 1-4 VLAN Workgroup Application Shared Server The switch’s compliance to the IEEE802 .1Q tagging VLAN standard allows ports to exist in multiple VLANs for shared resources, such as servers, printers, or Switch-to-S witch connections. It is also possible to have resource ...

  • ZyXEL Communications EES-1024AF - page 28

    EES-1024AF Intelligent Ethernet Switch 1-8 Getting to Know the EES 1024 Figure 1-5 Shared Server In this example, stations in different VLANs share resources. As a result, VLAN 1 and VLAN 2 can access VLAN 3 for printing. All VLAN port members of VLAN3 can see the broadcasts from ports configured in VLAN3. ...

  • ZyXEL Communications EES-1024AF - page 29

    EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-1 This section describes the hardware of the EES-1024AF Intelligent Switch, and gives a functional overview of the switch. 2.1 Hardware Description 2.1.1 The Front Panel The front panel of the switch consists of 24 auto-sensing 10/100Mb ps Ethernet RJ-45 ports, two optional expansion slo ...

  • ZyXEL Communications EES-1024AF - page 30

    EES-1024AF Intelligent Ethernet Switch 2-2 Hardware Connections Console Port Console management can be done through the Conso le Port. It requires a direct connection between the switch and a computer via a RS-232 cable. LED Indicators All LED indicators are located on the front panel of the sw itch. They provide a real-time indication of system an ...

  • ZyXEL Communications EES-1024AF - page 31

    EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-3 Figure 2-3 The Rear Panel of the switch Power On After all network cables are connected, plug the power cord into the power socket on the back panel and the other end into a power outlet. Turn the power on using the pow er Switch on the back panel. The switch uses a universal power sup ...

  • ZyXEL Communications EES-1024AF - page 32

    EES-1024AF Intelligent Ethernet Switch 2-4 Hardware Connections Step 4. Remove the adhesive backing from the supplied rubbe r feet. Step 5. Attach the rubber feet to each corner on the botto m of the EES-1024AF. These rubber feet help protect the EES-1024AF from shock or vibration and en sure space between devices when stacking. Figure 2-4 Attachin ...

  • ZyXEL Communications EES-1024AF - page 33

    EES-1024AF Intelligent Ethernet Switch Hardware Connections 2-5 Figure 2-6 Mount the switch in an EIA standard 19-inch Rack ...

  • ZyXEL Communications EES-1024AF - page 34

    ...

  • ZyXEL Communications EES-1024AF - page 35

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-1 3.1 Introduction 1 With the EES switch’s two expansion slots, you can use optional modules that allow your EES switch to provide 10/100 Mbps and 1000 Mb ps connections to other compatible netw ork devices. The optional m odules are designed to expand your network a ...

  • ZyXEL Communications EES-1024AF - page 36

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-2 Optional Modules • Supports store-and-forward switching • Supports non-blocking and full wire speed forwarding rate • 4K-entry MAC address table • 100M, LK/ACT, FD/COL LEDs • Supports SNMP management Front Panel LEDs There are three types of LEDs for each RJ-45 port. Table ...

  • ZyXEL Communications EES-1024AF - page 37

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-3 • 128Kb memory buffer sharing • Supports store-and-forward switching • Supports half-duplex and full-duplex m odes at 10/100 Mbps on MII interface • 1000M, 100M, LK/ACT and FD/COL LEDs Front Panel LEDs There are four LEDs for the RJ-45 port. Table 3-2 EM1024A ...

  • ZyXEL Communications EES-1024AF - page 38

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-4 Optional Modules 3.4.2 EM1024A-4FX-SC: 4-Port 100Base-FX (Multi-mode) Intelligent Fiber Module Figure 3-4 EM1024A-4FX-SC Front Panel Features • Two/Four 100Mbps fiber ports (SC connectors) • 5MB memory buffer • 12K-entry MAC address table • Supports store-and-forward switchin ...

  • ZyXEL Communications EES-1024AF - page 39

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-5 3.4.4 EM1024A-4FX-SC-30: 4-Port 100Base-FX (Single-mode) Intelligent Fiber Module Figure 3-6 EM1024A-4FX-SC-30 Front Panel Features • Two/Four 100Mbps fiber ports (SC connectors) • 5MB memory buffer • 12K-entry MAC address table • Supports store-and-forward p ...

  • ZyXEL Communications EES-1024AF - page 40

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-6 Optional Modules 3.5 Gigabit 1000Base-X Intelligent Fiber Module Series 3.5.1 EM1024A-SX-SC: Gigabit 1000Base-SX Intelligent Module Figure 3-7 EM1024A-SX-SC Front Panel Features • One auto-negotiating 1000Mbps fiber port (SC connectors) • 4K MAC address table • Supports store-a ...

  • ZyXEL Communications EES-1024AF - page 41

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Optional Modules 3-7 • LK, ACT, FD and COL LEDs • Supports connection distance of up to 10 kilom eters (usi ng 9/125um Single-m ode fiber) via fiber optic cable. • Support SNMP management Front Panel LEDs There are four LED indicators for the fiber port. Table 3-4 Gigabit 1000Base ...

  • ZyXEL Communications EES-1024AF - page 42

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide 3-8 Optional Modules Figure 3-10 Inserting the optional module Never force, bend or twist the optional modules into the expansion slots. Step 6. Turn on the switch. The switch automatically detects the installed optional module. Connect any necessary network cables to the optional module ...

  • ZyXEL Communications EES-1024AF - page 43

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-1 This chapter introduces the basics of SMT. 4.1 Connecting to the Console Port The Console configuration (out of band) allows you to set your switch to enable a user at a rem ote console terminal to communicate with the switch as if the console terminal were direct ...

  • ZyXEL Communications EES-1024AF - page 44

    EES-1024AF Intelligent Ethernet Switch 4-2 Introducing the SMT Figure 4-2 Parameter settings of communication parameters in Hyper Terminal Table 4-1 Field Values for Hyper Terminal in Windows FIELD VALUE Baud Rate 9600 bps Data Bits 8 Parity none Stop Bit 1 Control flow None 4.2.1 Initial Screen At the prompt, type go and press [ENTER] to display t ...

  • ZyXEL Communications EES-1024AF - page 45

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-3 4.3 Navigating the SMT Interface The SMT (System Management Terminal) is the interface you use to manage your switch through the Console port or Telnet. Several operations that you should be familiar with before you attem pt to modify the configuration are listed ...

  • ZyXEL Communications EES-1024AF - page 46

    EES-1024AF Intelligent Ethernet Switch 4-4 Introducing the SMT Table 4-3 SMT Main Menu Summary # MENU TITLE DESCRIPTION 4 Spanning Tree Protocol Use this menu to enable or disable the Spanning Tree Protocol and show the port status. 5 Broadcast Storm Filter Use this menu to enabl e or disable the Broadcast Storm filters. 6 IGMP Use this menu to ena ...

  • ZyXEL Communications EES-1024AF - page 47

    EES-1024AF Intelligent Ethernet Switch Optional Modules Guide Introducing the SMT 4-5 The SMT will return to the Device Settings screen. You should see your new user name and the password will be shown as “********”. 4.4.2 Enable Console Login ZyXEL strongly recommend that you enable the console login feature for security. Step 1. In the Device ...

  • ZyXEL Communications EES-1024AF - page 48

    EES-1024AF Intelligent Ethernet Switch 4-6 Introducing the SMT Figure 4-7 SMT – Save Current Settings 4.5.2 Reboot Y our EES-1024AF Follow the steps to reboot the switch. Rebooting will make all new settings take effect. Step 1. Enter “r” from the SMT main menu. Step 2. Enter “y’” at the prompt to continue the reboot pro cess. Otherwise ...

  • ZyXEL Communications EES-1024AF - page 49

    Getting S tarted II Part II: Getting Started This part shows you how to configure the basic setup using the SMT menus and introduces you to the Web Configurator . ...

  • ZyXEL Communications EES-1024AF - page 50

    ...

  • ZyXEL Communications EES-1024AF - page 51

    EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-1 This chapter shows you basic config uration using the SMT. 5.1 Ethernet Port Settings Ethernet port connections can be in half-duplex or full - duplex mode. The Ethernet port must use the same speed or duplex mode setting as the peer Ethernet port in order to connect. Enter 2 fr ...

  • ZyXEL Communications EES-1024AF - page 52

    EES-1024AF Intelligent Ethernet Switch 5-2 General Setup Using the SMT Table 5-1 Port Settings Fields # FIELD DESCRIPTION EXAMPLE 5 VLAN Tagged The VLAN ID will be tagged to the transmitted packets through the port. No 6 Default VLAN ID Select this option to set the default VLAN ID. You can select from 1 to 4095. 1 7 Note This option allows you to ...

  • ZyXEL Communications EES-1024AF - page 53

    EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-3 Figure 5-3 SMT - Spanning Tree Protocol with Port Status 5.4 Broadcast S torm Filter Follow the steps to enable or disable the broadcast storm filter. Step 1. Enter 5 from the main menu to bring up the Broadcast Storm Filter page. Step 2. Enter 1 to enable or 2 to diable the fil ...

  • ZyXEL Communications EES-1024AF - page 54

    EES-1024AF Intelligent Ethernet Switch 5-4 General Setup Using the SMT Figure 5-5 SMT - IGMP 5.6 Setting the VLAN Mode Follow the steps to set the VLAN mode. Step 1. Enter “v” from the main menu to open the VLAN Mode page. Step 2. Enter one of the two modes at the prompt. Figure 5-6 SMT - VLAN Mode 5.7 Setting the VLAN for CPU To set the VLAN f ...

  • ZyXEL Communications EES-1024AF - page 55

    EES-1024AF Intelligent Ethernet Switch General Setup Using the SMT 5-5 5.8 Configure Secure IP Addresses When the secure IP for Telnet or HTTP is enabled, only tho se IP address(es) specified in this screen will be able to Telnet to the switch or login using th e Web Configurator. You can specify up to 4 IP addresses. If either secure IP feature is ...

  • ZyXEL Communications EES-1024AF - page 56

    ...

  • ZyXEL Communications EES-1024AF - page 57

    EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-1 This section introduces the configuration and functions of the Web Configurator. 6.1 Introduction The embedded Web Configurator offers advanced managem ent features and a llows you to manage the switch from anywhere on the network through a standard browser such as Microsoft Inte ...

  • ZyXEL Communications EES-1024AF - page 58

    EES-1024AF Intelligent Ethernet Switch 6-2 Using the Web Configurator 6.3 Navigating the W eb Configurator 6.3.1 T ask Bar The task bar displays at the left of all web pages provides a consistent way to access all program functions. Figure 6-2 Web Configurator - Navigation Bar 6.3.2 The W eb Configurator Front Panel Display The Web Configurator dis ...

  • ZyXEL Communications EES-1024AF - page 59

    EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-3 Figure 6-3 Web Configurator - Front Panel A yellow “X” indicates a port is disabled. To view port information, click on the ports to open the Ports page. See 7.1 Port Management for information on config uring the ports. 6.3.3 Commonly Used Buttons The table describes the act ...

  • ZyXEL Communications EES-1024AF - page 60

    EES-1024AF Intelligent Ethernet Switch 6-4 Using the Web Configurator Figure 6-4 Web Configurator - Home Table 6-3 Home Page Field Description FIELD DESCRIPTION EXAMPLE System Name Displays the descriptive name for identification purposes. EES 1024AF System Location The physical loca tion of the switch. somewhere System Contact The name of the pers ...

  • ZyXEL Communications EES-1024AF - page 61

    EES-1024AF Intelligent Ethernet Switch Using the Web Configurator 6-5 6.5 Modules Modules page shows the modules that have been insta lled into the switch. There are fixed 24x 10/100 Base-TX ports in Module 0, and another 2 slot ( m odule 1 and m odule 2 ) used for expansion. In the following example, 1- port Gigabit 1000Base-SX Fiber Module is ins ...

  • ZyXEL Communications EES-1024AF - page 62

    ...

  • ZyXEL Communications EES-1024AF - page 63

    Advanced Applications and Management III Part III: Advanced Applications and Management This part shows you how to use the advanc ed features of the W eb Configurator . ...

  • ZyXEL Communications EES-1024AF - page 64

    ...

  • ZyXEL Communications EES-1024AF - page 65

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-1 7.1 Port Management Inside the Ports page, you can enable or disable, configure sp eed and duplex, and assign VLAN ID to each port. The Port Management table shows the port status of all ports. You can also change some properties of all ports in this table. Figure 7-1 Web Configurat ...

  • ZyXEL Communications EES-1024AF - page 66

    EES-1024AF Intelligent Ethernet Switch 7-2 Advanced Web Management Table 7-1 Port Management Field Description FIELDS DESCRIPTION Flow Control When this option is selected, the sw itch sends a PAUSE message to the device to pause the transmission when the buffer in the switch is full. This works only for devices in Full duplex mode. Back Pressure W ...

  • ZyXEL Communications EES-1024AF - page 67

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-3 Table 7-2 The Statistics Field Description FIELD DESCRIPTION Bytes RX The total bytes received from that port Bytes TX The total bytes sent from that port Frames RX The total packets receives from that port (of all sizes) Broadcast RX The total broadcast packets rece ived from that ...

  • ZyXEL Communications EES-1024AF - page 68

    EES-1024AF Intelligent Ethernet Switch 7-4 Advanced Web Management 7.3 VLAN ( V irtual LAN ) A VLAN ( Virtual LAN ) is a group of switching ports designated by the switch as belonging to the same broadcast domain. This feature allows the workgroup to be define d on the basis of their logical location instead of their physical location, and this doe ...

  • ZyXEL Communications EES-1024AF - page 69

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-5 >> Click this button to display the next two VLANs << Click this button to display the previous two VLANs >>| Click this button to display the last two VLANs |<< Click this button to display the first two VLANs Enter the VLAN index in the VLAN field then clic ...

  • ZyXEL Communications EES-1024AF - page 70

    EES-1024AF Intelligent Ethernet Switch 7-6 Advanced Web Management 7.5 STP (S panning T ree Protocol) Spanning tree is a link management protocol that pro vi des path redundancy while preventing undesirable loops in the network. For Layer 2 Ethernet network to function properl y, only one active path must exist between two stations. The spanning-tr ...

  • ZyXEL Communications EES-1024AF - page 71

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-7 Table 7-4 STP Fields Descriptions FIELD DESCRIPTION The Current Spanning Tree Root describes the unique root switch information for the instance of spanning tree. MAC Address The MAC address of the root switch. Root Max Age The amount of time (in seconds) the protocol information re ...

  • ZyXEL Communications EES-1024AF - page 72

    EES-1024AF Intelligent Ethernet Switch 7-8 Advanced Web Management 7.6 Port Security When a computer accesses a port on the switch, the MAC a ddress of that computer is entered in the MAC address table of that port. Port Security allows you to restrict the number of MAC addresses residing in a port. For ex ample, if a dummy extension hub is attache ...

  • ZyXEL Communications EES-1024AF - page 73

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-9 7.7 Port Priority – 802.1p There are two priority queues ( high and low ) on each port. Each port arbitrates between two transmit queues (high and low priority). The arbitration uses weighted round-r obin between the high and low priority queues, and you can adjust this weight. 7. ...

  • ZyXEL Communications EES-1024AF - page 74

    EES-1024AF Intelligent Ethernet Switch 7-10 Advanced Web Management port. Please check the corresponding mapping checkbox to assi gn a high priorit y or uncheck that to assign a low priority. The old 48310 and 48 320 modules do not support this fun ction. Figure 7-8 Web Configurator - Port Priority (IPv4 Type of Service) 7.9 IGMP (IP Multicast) Mul ...

  • ZyXEL Communications EES-1024AF - page 75

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-1 1 Figure 7-9 Web Configurator - IGMP 7.10 S tatic Address You can lock a certain MAC address ( associated with a host, ) to a certain port. Once the MAC address is locked to a specific port, this MAC address will not receive any packets if it is moved to another port. Static address ...

  • ZyXEL Communications EES-1024AF - page 76

    EES-1024AF Intelligent Ethernet Switch 7-12 Advanced Web Management Figure 7-10 Web Configurator - Static Address 7.11 Broadcast S torm Filter Storm filter avoids flooded data packets. This feature pr events the bursts of broadcast traffic. Excessive broadcast packets ( Broadcast Storms ) can be filtered out by enabling the Broadcast Storm Filterin ...

  • ZyXEL Communications EES-1024AF - page 77

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-13 Figure 7-11 Web Configurator -Broadcast Storm Filter 7.12 Port Mirror (Snif fer) Port Mirror (Sniffer) mirrors traffic (all frames) from a speci fic resource port to a target port. This helps tracking down network errors or erroneous packet transfers without interrupting the flow o ...

  • ZyXEL Communications EES-1024AF - page 78

    EES-1024AF Intelligent Ethernet Switch 7-14 Advanced Web Management Figure 7-12 Web Configurator - Port Mirroring 7.13 IP Config You can change the IP address, subnet mask and default gateway of the ma naged node. You can also modify the fields from the RS232 console. Enter the IP address, subne t mask and default gateway in the corresponding field ...

  • ZyXEL Communications EES-1024AF - page 79

    EES-1024AF Intelligent Ethernet Switch Advanced Web Management 7-15 Figure 7-13 Web Configurator - IP Config 7.14 SNMP You can manage the switch using a third-party SNMP ( Simple Network Managem ent Protocol ) agent. The community strings control the access rights to the SNMP agent. Type the system name, system location and system contact in the co ...

  • ZyXEL Communications EES-1024AF - page 80

    EES-1024AF Intelligent Ethernet Switch 7-16 Advanced Web Management Figure 7-14 Web Configurator - SNMP ...

  • ZyXEL Communications EES-1024AF - page 81

    EES-1024AF Intelligent Ethernet Switch Configuration and Firmware Maintenance 8-1 This chapter shows you how to save, reboot, reset and upgrade new firmware to the switch using the Web Configurator. 8.1 Save and Reboot 8.1.1 Save You can save current settings by selecting Current Settings then clicking Apply next to the checkbox. You should reboot ...

  • ZyXEL Communications EES-1024AF - page 82

    EES-1024AF Intelligent Ethernet Switch 8-2 Configuration and Firmware Maintenance Figure 8-1 Web Configurator - Save & Reboot 8.3 Upgrade Follow the steps below to upgrade the firm ware of the managed unit using the Web Configurator. Step 1. Download the latest firmware from ZyXEL website ( http://www.zyxel.com ). Step 2. Enter the password in ...

  • ZyXEL Communications EES-1024AF - page 83

    EES-1024AF Intelligent Ethernet Switch Configuration and Firmware Maintenance 8-3 Figure 8-2 Web Configurator - Upgrade Do NOT shut down the switch if you can't upgrade your new firmware successfully. Try the upgrade process again. Contact local customer support if any problem occurred. ...

  • ZyXEL Communications EES-1024AF - page 84

    ...

  • ZyXEL Communications EES-1024AF - page 85

    Additional Information IV Part IV: Additional Information This part cont ains the troubleshooting, the appendices and the index. ...

  • ZyXEL Communications EES-1024AF - page 86

    ...

  • ZyXEL Communications EES-1024AF - page 87

    EES-1024AF Intelligent Ethernet Switch T roubleshooting 9-1 9.1 Console Port I cannot access the switch using the Console Port. Table 9-1 Troubleshooting Console Port STEPS CORRECTIVE ACTION 1 Check to see if the switch is connected to your comput er using the RS-232 cable. 2 Check to see if the communications program is configured correctly. Set t ...

  • ZyXEL Communications EES-1024AF - page 88

    EES-1024AF Intelligent Ethernet Switch 9-2 T roubleshooting The Web Configurator does not show properly in Internet Explorer. Table 9-4 Troubleshooting Internet Explorer STEPS CORRECTIVE ACTION 1 Make sure you are using Internet Explorer 4.0 or Netscap e Communicator 4.x and later versions. 2 Make sure the Java applet feature is turned on. See the ...

  • ZyXEL Communications EES-1024AF - page 89

    EES-1024AF Intelligent Ethernet Switch Microsoft Internet Explorer Setup A Appendix A Microsof t Internet Explorer 5.0 Setup This appendix shows you how to enable Java applet secur ity option in Internet Explorer 5. If the pages of the web configurator does not display properl y in Internet Explorer, follo w the s teps below to enable the Java appl ...

  • ZyXEL Communications EES-1024AF - page 90

    EES-1024AF Intelligent Ethernet Switch B Microsoft Internet Explorer Setup Diagram 3 IE5.0- Add Trusted Site IP Address Step 8. In the Internet Options window, click Custom Level . Step 9. Scroll down to the Microsoft VM option. Under Java Permissions select Custom . Then click the Java Custom Settings button that displays. Diagram 4 IE5.0 – Secu ...

  • ZyXEL Communications EES-1024AF - page 91

    EES-1024AF Intelligent Ethernet Switch Microsoft Internet Explorer Setup C Diagram 5 IE5.0 – Edit Permissions Step 12. Click Yes to change the security settings then click OK to close all settings windows. Diagram 6 IE5.0 – Internet Security Change Verification ...

  • ZyXEL Communications EES-1024AF - page 92

    ...

  • ZyXEL Communications EES-1024AF - page 93

    EES-1024AF Intelligent Ethernet Switch Product S pecifica t ions E Appendix B Product S pecifications This section provides the specifications of EES-1024AF Intelligent Switch and optional modules. Diagram 7 General Product Specifications Standards • IEEE802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE802.3u 100BASE-TX Fast Ethernet (twiste ...

  • ZyXEL Communications EES-1024AF - page 94

    EES-1024AF Intelligent Ethernet Switch F Product S pecifications Diagram 7 General Product Specifications Full/Half Duplex • Full/half duplex for 10/100Mbps speed s • Full duplex only for Gigabit speed Media Interface Exchange All ports MDI-II/MDI-X auto-adjustment Diagram 8 Performance and Management Specifications Back plane 12Gbps Packet For ...

  • ZyXEL Communications EES-1024AF - page 95

    EES-1024AF Intelligent Ethernet Switch Product S pecifica t ions G Diagram 8 Performance and Management Specifications • VLAN MIBs (RFC 2674)(Future Upgrade) • ZyXEL Private MIB Console Port DB-9 RS-232 Diagram 9 Physical and Environmental Specifications Ventilation Main switch: 2 DC fans Weight Main switch: 4.3Kg Optional module: 220 ~ 280g LE ...

  • ZyXEL Communications EES-1024AF - page 96

    EES-1024AF Intelligent Ethernet Switch H Product S pecifications Diagram 10 Optional Modules Specifications 10/100Base T module EM1024A-8TP 8 x 10/100 RJ-45, with Auto MDI/MDI- X 100m 100FX module EM1024A-2FX-SC 2 x 100FX(SC, multi-mode) 2km EM1024A-2FX-SC-30 2 x 100FX(SC, single-mode) 30km EM1024A-4FX-SC 4 x 100FX(S C, multi-mode) 2km EM1024A-4FX- ...

  • ZyXEL Communications EES-1024AF - page 97

    EES-1024AF Intelligent Ethernet Switch Index I Index A Address Table................................................................. 5-2 Auto MDI/MDIX ........................................................... 2-1 auto-sensi ng.................................................................... 2-1 B Broadcast Storm Filter........................ ...

  • ZyXEL Communications EES-1024AF - page 98

    EES-1024AF Intelligent Ethernet Switch J Index J Jabber ............................................................................. 7-3 M MAC address ............................................................... 7-11 MAC Address ................................................................ 6- 4 Management Inform ation Base (MIB) ............ ...

  • ZyXEL Communications EES-1024AF - page 99

    EES-1024AF Intelligent Ethernet Switch Index K T Telnet.............................................................................. 9-1 TOS ..................................................... See Type Of Service Troubleshooting Console Port............................................................... 9-1 Internet Explorer .................... ...

Manufacturer ZyXEL Communications Category Switch

Documents that we receive from a manufacturer of a ZyXEL Communications EES-1024AF can be divided into several groups. They are, among others:
- ZyXEL Communications technical drawings
- EES-1024AF manuals
- ZyXEL Communications product data sheets
- information booklets
- or energy labels ZyXEL Communications EES-1024AF
All of them are important, but the most important information from the point of view of use of the device are in the user manual ZyXEL Communications EES-1024AF.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ZyXEL Communications EES-1024AF, service manual, brief instructions and user manuals ZyXEL Communications EES-1024AF. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ZyXEL Communications EES-1024AF.

Similar manuals

A complete manual for the device ZyXEL Communications EES-1024AF, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ZyXEL Communications EES-1024AF by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ZyXEL Communications EES-1024AF.

A complete ZyXEL Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ZyXEL Communications EES-1024AF - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ZyXEL Communications EES-1024AF, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ZyXEL Communications EES-1024AF, that we can find in the current document
3. Tips how to use the basic functions of the device ZyXEL Communications EES-1024AF - which should help us in our first steps of using ZyXEL Communications EES-1024AF
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ZyXEL Communications EES-1024AF
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ZyXEL Communications EES-1024AF in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ZyXEL Communications EES-1024AF?

Use the form below

If you did not solve your problem by using a manual ZyXEL Communications EES-1024AF, ask a question using the form below. If a user had a similar problem with ZyXEL Communications EES-1024AF it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)