English dropdown-ico

Manual Hobart ML - 104481

12 pages 1.24 mb
Download

Go to site of 12

Summary
  • Hobart ML - 104481 - page 1

    701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com I N S T R U C T I O N S FORM 18815 Rev. A (12-99) D330 MIXER D330 MIXERS ML - 104481 ...

  • Hobart ML - 104481 - page 2

    – 2 – © HOBART CORPORATION, 1994 MODEL D330 MIXER ...

  • Hobart ML - 104481 - page 3

    – 3 – Installation, Operation, and Care of MODEL D330 MIXERS SA VE THESE INSTRUCTIONS GENERAL The D330 Mixer is a medium duty 30 quart mixer which develops 1 1 / 4 horsepower and features a timer, thermal overload protection, and a #12 attachment hub as standard equipment. A variety of agitators are available for the 30 quart bowl. A special 20 ...

  • Hobart ML - 104481 - page 4

    – 4 – ELECTRICAL CONNECTION WARNING : ELECTRICAL AND GROUNDING CONNECTION MUST COMPLY WITH THE APPLICABLE PORTION OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT. A hole for 3 ⁄ 4 " tra ...

  • Hobart ML - 104481 - page 5

    – 5 – Start Button Stop Button Timer Gear Shift Lever PL-40142-1 PL-40174-1 Controls Bowl Lift Handle Apron Bowl Handle Bowl Clamp Bowl Support Attachment Hub Bowl Guard Agitator Bowl Drip Cup Alignment Pin OPERA TION WARNING : MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION, DO NOT USE WITHOUT INTERLOCKED GUARD ...

  • Hobart ML - 104481 - page 6

    – 6 – PROGRAMMABLE TIMER CONTROLLER (when equipped) At Idle, the timer display [ – – : – – ] shows that no time has been set (Fig. 4). Fig. 4 Timer Keys Programming Function (if the mixer is not mixing). P1 Contains up to four preset times. Displays each preset time sequentially. P2 Contains up to four additional preset times. Displays ...

  • Hobart ML - 104481 - page 7

    – 7 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued Using the Preset Keys, P1 or P2, to set the Mixing Time . . . Each preset key has four time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. The chart below shows the default settings; the next page ...

  • Hobart ML - 104481 - page 8

    – 8 – PROGRAMMABLE TIMER CONTROLLER (when equipped) continued To Revise the Preset Mixing Times contained in P1 or P2 . . . Each preset key has four preset time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. Beginning from the Idle display [ – – : – ? ...

  • Hobart ML - 104481 - page 9

    – 9 – CHANGING SPEEDS The GEAR SHIFT LEVER is used to change speeds. Always stop the mixer before changing speeds. To change speeds, push the STOP button, move the gear shift lever to the desired speed, and restart the mixer by pushing the START button. NOTE : If you do not stop the mixer to change speeds, it will automatically shut itself off ...

  • Hobart ML - 104481 - page 10

    – 10 – PL-40071-1 Wire Cage Rotated Left Latch Ridge On Drip Cup Rear Retainer Splash Guard Wire Cage Front-Center Position Front-Center Retainer Centering Ramp Black Release Knob Centering Pin Bowl Guard (Fig. 5) The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator. To rotate ...

  • Hobart ML - 104481 - page 11

    – 11 – Attachments To install an attachment, loosen the attachment hub thumb screw and remove the plug. Insert the attachment into the attachment hub, making certain that the square shank of the attachment is in the square driver of the mixer. Secure the attachment by tightening the thumb screw. Move the gear shift lever to the desired speed. W ...

  • Hobart ML - 104481 - page 12

    – 12 – PL-40172-1 Bowl Lift Slideways FORM 18815 Rev. A (12-99) PRINTED IN U.S.A. SERVICE If service is needed on this equipment, contact your local Hobart Service Office. Bowl Lift The bowl lift mechanism should be lubricated twice a year. Remove the screw and access cover from the rear of the pedestal. Lightly coat moving parts with Lubriplat ...

Manufacturer Hobart Category Mixer

Documents that we receive from a manufacturer of a Hobart ML - 104481 can be divided into several groups. They are, among others:
- Hobart technical drawings
- ML - 104481 manuals
- Hobart product data sheets
- information booklets
- or energy labels Hobart ML - 104481
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hobart ML - 104481.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hobart ML - 104481, service manual, brief instructions and user manuals Hobart ML - 104481. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hobart ML - 104481.

Similar manuals

A complete manual for the device Hobart ML - 104481, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hobart ML - 104481 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hobart ML - 104481.

A complete Hobart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hobart ML - 104481 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hobart ML - 104481, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hobart ML - 104481, that we can find in the current document
3. Tips how to use the basic functions of the device Hobart ML - 104481 - which should help us in our first steps of using Hobart ML - 104481
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hobart ML - 104481
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hobart ML - 104481 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hobart ML - 104481?

Use the form below

If you did not solve your problem by using a manual Hobart ML - 104481, ask a question using the form below. If a user had a similar problem with Hobart ML - 104481 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)