English dropdown-ico

Manual Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852

16 pages 0.24 mb
Download

Go to site of 16

Summary
  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 1

    INSTRUCTION MANUAL 3 H.P . Single-Stage Dust Collector (Model 50-852, thr ee phase) (Model 50-853, single phase) P ART NO. 902108 - 06-27-02 Copyright © 2002 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Cana ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 2

    2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedures ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the product. Using the machine with r espect and caution will considerably lessen the possibility of personal injury . However , if normal safety precauti ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 3

    3 ADDITIONAL SAFETY RULES FOR DUST COLLECTORS WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJURY . 1. DO NOT OPERA TE THIS MACHINE until it is assembled and installed according to the instructions. 2. OBT AIN ADVICE FROM YOUR SUPERVISOR, instructor , or another qualified person if you are not familiar with the operation ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 4

    4 UNP ACKING AND CLEANING Carefully unpack the tool and all loose items fr om the shipping container(s). Remove the protective coating fr om all unpainted surfaces. This coating may be removed with a soft cloth moistened wi th ke r osene (do not use acetone, gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 5

    5 Fig. 5 Fig. 6 Fig. 7 Fig. 8 ASSEMBLING CASTER ASSEMBLIES TO BASE Align the holes in caster assembly (A) Fig. 5, with four holes in support stand (B) located on the underside of base (C). Place a lockwasher (E) Fig. 5 onto a hex head screw (D), insert the hex head scr ew through the caster (A), and thread into hole in base (B). Repeat this pr oces ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 6

    6 Fig. 9 Fig. 10 Fig. 11 Fig. 12 4. Apply a bead of silicone sealant around flange of chute (F) Fig. 9. Align holes in ten-hole gasket (G) Fig. 9, with mounting holes in blower flange (F) and press gasket onto flange as shown. 5. Align mounting holes in dust chute (H) Fig. 10, with gasket (G), assembled in STEP 4. Place a lockwasher onto a hex head ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 7

    7 Fig. 13 Fig. 14 Fig. 15 Fig. 17 7. Apply a bead of silicone sealant around flange of chute (H) Fig. 14. Align holes in eight-hole gasket (K) Fig. 14, with mounting holes in chute (H) and press gasket (K) onto flange as shown. 8. Align mounting holes in left hand drum (N) Fig. 15, with gasket (K), assembled in STEP 7. Place a lockwasher onto a hex ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 8

    8 Fig. 18 Fig. 19 Fig. 21 Fig. 20 11. Align two mounting holes in the top of drum support arm (T) Fig. 18, with two pre-drilled holes in drum (N) and fasten drum support arm (T) to drum (N). Place a lockwasher then a flat washer onto the hex head screw , insert the hex head screw thr ough the hole in upper drum support and drum and thread a hex nut ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 9

    9 Fig. 22 Fig. 23 Fig. 24 Fig. 25 ASSEMBLING FIL TER AND DUST COLLECTION BAGS TO DRUM 1. Hook the loop on the top of filter bag (A) Fig. 22, onto filter bag support rod (B) as shown. 2. Assemble extension rod (C) Fig. 23, into the end of filter bag support rod (B). Raise support rods (B) and (C), with filter bag (A) attached and place end of extens ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 10

    10 Fig. 26 Fig. 28 4. Pull up on each retaining clip (A) Fig. 26, and insert the dust collection bag (B) underneath each retaining clip to hold the dust collection bag in place. 5. Place the locking clamp (C) Fig. 26 around dust collection bag and dust collector drum and lock in place. NOTE: Make certain locking clamp is positioned in the channel o ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 11

    11 Fig. 29 Fig. 30 Fig. 31 ASSEMBLING DUST INT AKE POR T TO BLOWER AND MOTOR ASSEMBL Y MAKE CERT AIN THE DUST COLLECTOR IS DISCONNECTED FROM THE POWER SOURCE . 1. Align the four holes in the dust intake port (A) Fig. 29, with the mounting holes in the lip of flange (B) of blower assembly and fasten with four sheet metal screws (C). 2. Fig. 30, illu ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 12

    12 Fig. 32 Fig. 33 Fig. 34 Fig. 35 MODEL 50-853 SINGLE PHASE INST ALLA TION Y our dust collector is supplied with a motor and controller; however , it is not supplied with a power cord and plug. 1. T o connect the dust collector to a power system, remove contr oller cover (A) Fig. 34. 2. Bring the single phase power line through the access hole (B) ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 13

    13 OPERA TING CONTROLS ON/OFF SWITCH (Model 50-852) The “on/off” switch is located on the side of the motor stand. T o tur n the dust collector “ON”, push button (A) Fig. 36. T o tur n the dust collector “OFF”, push button (B). Fig. 36 Fig. 37 ON/OFF SWITCH (Model 50-853) The “on/off” switch is located on the side of the motor stand ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 14

    14 NOTES ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 15

    15 Printed in U.S.A. P AR TS, SERVICE OR WARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standards and ar e serviced by a network of Porter -Cable · Delta Factory Service Centers and Delta Authorized Service Stations. T o obtain additional information regar ding your Delta quality product or to obtain part ...

  • Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - page 16

    The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’ s Saw ® , Contractor’ s Saw ® , Contractor’ s Saw II™, Delta ® , DEL T ACRAFT ® , DEL T AGRAM™, Delta Series 2000™, DURA TRONIC™, Emc²™, FLEX ® , Flying Chips? ...

Manufacturer Delta Category Dust Collector

Documents that we receive from a manufacturer of a Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 can be divided into several groups. They are, among others:
- Delta technical drawings
- 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 manuals
- Delta product data sheets
- information booklets
- or energy labels Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852
All of them are important, but the most important information from the point of view of use of the device are in the user manual Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852, service manual, brief instructions and user manuals Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852.

Similar manuals

A complete manual for the device Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852.

A complete Delta manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852, that we can find in the current document
3. Tips how to use the basic functions of the device Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 - which should help us in our first steps of using Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852?

Use the form below

If you did not solve your problem by using a manual Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852, ask a question using the form below. If a user had a similar problem with Delta 3 H.P. SINGLE-STAGE DUST COLLECTOR 50-852 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)