English dropdown-ico

Manual abit IP35 PRO XE

88 pages Not applicable
Download

Go to site of 88

Summary
  • abit IP35 PRO XE - page 1

    Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IP35 Pro Motherboard Socket 775 User’s Manual About this Manual: This user’s manual contains a ll the information you may need for setti ng up this motherboard. To read the us er’s manual of PDF format (readable by Adobe Reader ), place the “Driver & Utility CD” ...

  • abit IP35 PRO XE - page 2

    ii IP35 Pro IP35 Pro User’s Manual English + Multilingual QIG P/N: 4310-0000-89 Rev. 2.00, May 2007 Copyri g ht and Warranty Notice The information in this document is sub j ect to chan g e without not ice and d oes not repres ent a commitment on pa rt of the ven dor, who a ssumes no lia bility or responsi bility for any errors that may appear in ...

  • abit IP35 PRO XE - page 3

    Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IP35 Pro iii Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specif ications ............................................................................... 1-1 1.2 Motherbo ard Layout ......................................... ...

  • abit IP35 PRO XE - page 4

    iv IP35 Pro 3. Driver & Utility ................................................................. 3-1 3.1 CD-ROM AUTORUN ...................................................................... 3-1 3.2 Intel Chipset Software Installation Utility ....................................... 3-2 3.3 Intel Matrix St orage Manager ........................ ...

  • abit IP35 PRO XE - page 5

    Hardware Setup IP35 Pro 1-1 1. Hardware Setup 1.1 Specifications CPU • LGA775 Socket for Intel process or of: Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo, & Pentium Extreme Edition / Pentium Dual Core / Pentium D / Pentium 4. • Supports FSB 1333MHz Chipset • Intel P35 / ICH9R Memory • 4x 240-pin DIMM slot s support maximum memory ...

  • abit IP35 PRO XE - page 6

    1-2 IP35 Pro 1.2 Motherboard Layout ...

  • abit IP35 PRO XE - page 7

    Hardware Setup IP35 Pro 1-3 1.3 Choosing a Computer Chassis • Choose a chassi s big enough to in stall thi s motherboard. • As some features fo r this motherboard are impl emented by cablin g connectors on the motherboard to ind icators and switche s or buttons on the cha ssis, make sure your chassi s supports all the features required. • I f ...

  • abit IP35 PRO XE - page 8

    1-4 IP35 Pro 1.5 Checking Jumper Settings • For a 2-pin jumper, pl ug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN • For 3-pin jumper, pin 1~2 or pin 2~3 c an be shorted by pl ugging the jumper c ap in. Pin 1~2 SH ...

  • abit IP35 PRO XE - page 9

    Hardware Setup IP35 Pro 1-5 CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Ne vertheless, this backup battery exhausts after some five years. Once the error message like “ CMOS BATTERY HAS FAILED ” or “ CMOS checksum error ” displays ...

  • abit IP35 PRO XE - page 10

    1-6 IP35 Pro 1.6 Connecting Chassis Components 1.6.1 Power Connectors These connectors provide the connection from an ATX12V power supply. As the pl ugs from the power supply fit in only one orientation, find the correct one and p ush firmly down into these foolproof-designed connectors. For a fully configured system, we recommend that you use a po ...

  • abit IP35 PRO XE - page 11

    Hardware Setup IP35 Pro 1-7 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LE D indicators on the chassis front panel. Watch the power LED pin pos ition and orient ation. The mark “+” ali g n to the pin in the fi g ure below stands for positive polarity for the LED connection. Please pay atte ...

  • abit IP35 PRO XE - page 12

    1-8 IP35 Pro 1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidental scratch of a tiny surface-mount co mponent may seriously damage the motherboard. ※ In order to protect the contact pins, pl ease pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch t ...

  • abit IP35 PRO XE - page 13

    Hardware Setup IP35 Pro 1-9 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever while g ently pressing down the lo ...

  • abit IP35 PRO XE - page 14

    1-10 IP35 Pro 1.7.2 DDR2 Memory Slots To reach the performance of Dual Channel DDR2, the following rules must be obeyed: • For a 2-DIMM dual-channel installation: Populate DIMM modules of the same type and size on slots [ DIMM1 ]+[ DIMM3 ], or slots [ DIMM2 ]+[ DIMM4 ]. • For a 4-DIMM dual-channel installation: Populate 2 DIMM modules of the sa ...

  • abit IP35 PRO XE - page 15

    Hardware Setup IP35 Pro 1-11 1.7.3 PCI Express X16 Add-on Slots (Install Graphics Card) This motherboard prov ides dual PCI Express X 16 sl ots for one or two graphics cards installation of graphics cards that comply with PCI Express specifications. One PCI Express graphics card installation: Insert your PCI Express grap hics card into slot [ PCIEX ...

  • abit IP35 PRO XE - page 16

    1-12 IP35 Pro 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 3 4-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the floppy disk drives connector. Gener ...

  • abit IP35 PRO XE - page 17

    Hardware Setup IP35 Pro 1-13 1.8.2 Serial ATA Connectors Each SATA connector serves as one single channe l to connect one SATA device b y SATA cable. To connect SATA device: 1. Attach either en d of the s ignal cable to the SATA connector on motherboard. Attach the other end to the SATA device. 2. Attach the SATA power cable to the SATA device and ...

  • abit IP35 PRO XE - page 18

    1-14 IP35 Pro 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x addi tional US B 2.0 ports by c onnecting brack et or cable to the rear I/O panel or the front-mounted USB ports of your chassis. Pin Pin Assignment Pin Pin Assignment 1 5VDUAL 2 5VDUAL 3 Data0 - 4 Data1 - 5 Data0 + 6 Data1 + 7 Ground 8 Ground 10 NC ※ Make sure the connec ...

  • abit IP35 PRO XE - page 19

    Hardware Setup IP35 Pro 1-15 1.8.5 Internal Audio Connector This connector connects to the audio output of internal CD-ROM drive or add-on card . 1.8.6 Front Panel Audio Connection Header This header provides the front pane l connection for HD (High Definition) Audio, yet for AC’97 Audio CODEC connection, you must carefully check the pin assignme ...

  • abit IP35 PRO XE - page 20

    1-16 IP35 Pro Driver Configuration for AC’97 audio connection: The audio driver is originally configured to sup port HD Audio. For AC’97 audio connection, you may: 1. Right-click the “Realtek HD Audio Manager” icon in system tray. 2. Click “Audio I/O” tab, and then click “Connector Settings”. 3. Click “ Disabled front panel jack d ...

  • abit IP35 PRO XE - page 21

    Hardware Setup IP35 Pro 1-17 1.8.7 S/PDIF Output Connection Header This header provides the S/PDIF output connection to your add-on HDMI VGA card. Pin Pin Assignment 1 VCC (5V) 2 x 3 S/PDIF Out 4 Ground 1.8.8 PCI and PCI Express X1 Slots Install PCI Express X1 cards into slot “PCIE1”. Install PCI cards into slots “PCI1”, “PCI2”, and /or ...

  • abit IP35 PRO XE - page 22

    1-18 IP35 Pro 1.8.9 Guru Panel Connection Header This header is reserved for connecting abit ’s exclusive Guru Panel. For more information, please refer to the included Guru Panel Installation Guide. ...

  • abit IP35 PRO XE - page 23

    Hardware Setup IP35 Pro 1-19 1.9 Onboard Indicators and Buttons 1.9.1 POST Code Displayer This is an LED device to display the “ POST ” Code, the acronym for P ower O n S elf T est. The computer will execute the POST action whenever you power on the com puter. The POST process is controlled by the BIOS. It is used to d etect the status of the c ...

  • abit IP35 PRO XE - page 24

    1-20 IP35 Pro 1.9.2 Power Source Indicators • 3VSB: This LED lights up when the pow er su pply is connected with power source. • VCC: This LED lights up when the system p ower is on. 1.9.3 Onboard Buttons • PWRSW1: Push this bu tton to power on the system. • RESET1: Push this button to reset the system. ...

  • abit IP35 PRO XE - page 25

    Hardware Setup IP35 Pro 1-21 1.10 Connecting Rear Panel I/O Devices The rear I/O part of this mo therboard provides the f ollowing I/O ports : • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • EZ-CCMOS1: This switch enables clearing the CMOS memory w ithout uncovering the system chassis. To clear the CMOS memory by EZ- ...

  • abit IP35 PRO XE - page 26

    1-22 IP35 Pro ...

  • abit IP35 PRO XE - page 27

    BIOS Setup IP35 Pro 2-1 2. BIOS Setup This motherboard provides a p rogrammable EE PROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a pr ogram that deals with the basic level of communication bet ween processor and peripherals. Use the BIOS Setup program onl y when installing motherboard, reconfiguring system , ...

  • abit IP35 PRO XE - page 28

    2-2 IP35 Pro 2.1 μ Guru ™ Utility There are two setup menus in this μ Guru utility. You may switch between these two by clicking the left or right arrow key on keyboard: 2.1.1 OC Guru μ Guru Utility v1.01C OC Guru Genuine Intel(R) CPU 3.60GHz Item Help ► Frequency : 3672MHz CPU Operating Speed 3600(200) X - External Clock 204MHz X - Multipli ...

  • abit IP35 PRO XE - page 29

    BIOS Setup IP35 Pro 2-3 - Multiplier Factor This item displays the multiplier factor for the CPU you installed. - Estimated New CPU Clock This item displays an es timated CPU processor speed . - DRAM Speed (CPU:DRAM) This item determines the DRAM frequency. Voltages Control This option allows you to switch between the de fault and user-defined volt ...

  • abit IP35 PRO XE - page 30

    2-4 IP35 Pro - CPU GTLREF 0&2 / CPU GTLREF 1&3 These items select the percentage ratio of CPU VTT voltage for each group of the CPU GTL reference voltage. Power Cycle Statistics Click <Enter> key to enter its submenu: μ Guru Utility v1.01C OC Guru Power Cycle Statistics PC Up Time 0 Hours Item Help ►► PC Up Time Total 119 Hours P ...

  • abit IP35 PRO XE - page 31

    BIOS Setup IP35 Pro 2-5  Temperature Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Temperature Monitoring Reading Shutdown Enable Shutdown Temp. Beep Enable Beep Temp. (*)CPU Temperature 60 ° C/140 ° F (*) 85 ° /185 ° F (*) 75 ° C/167 ° F (*)System Temperature 35 ° C/95 ° F ( ) 65 ° ° C/149 ° ...

  • abit IP35 PRO XE - page 32

    2-6 IP35 Pro  Voltage Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Voltage Monitoring Reading Shutdown Enable Beep Enable High Limit Low Limit (*)CPU Core Voltage 1.25 V (*) (*) 1.60 V 0.00 V (*)DDR2 Voltage 1.80 V ( ) (*) 2.15 V 1.45 V (*)DDR2 VTT Voltage 0.89 V ( ) (*) 1.05 V 0.70 V (*)CPU VTT 1.2V Vo ...

  • abit IP35 PRO XE - page 33

    BIOS Setup IP35 Pro 2-7  Fan Speed Monitoring Click <Enter> key to enter its submenu: μ Guru Utility v1.01C ABIT EQ Fan Speed Monitoring Reading Shutdown Enable Beep Enable Low Limit (*)CPU FAN Speed 2440 RPM (*) (*) 300 RPM ( )SYS FAN Speed N/A ( ) ( ) 300 RPM ( )AUX1 FAN Speed N/A ( ) ( ) 300 RPM ( )AUX2 FAN Speed N/A ( ) ( ) 300 RPM ( ...

  • abit IP35 PRO XE - page 34

    2-8 IP35 Pro  FanEQ Control μ Guru Utility v1.01C ABIT EQ FanEQ Control ► 1st FanEQ Group Press Enter Item Help ►► ► 2nd FanEQ Group Press Enter  :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit  1st FanEQ Group Click <Enter> key to enter its submenu (1st FanEQ Group): μ Guru Utility v1.01C ABIT EQ 1st FanEQ Gr ...

  • abit IP35 PRO XE - page 35

    BIOS Setup IP35 Pro 2-9 - Control Temperature High/Low These items set the high and low temperature limit that you want to do the fan speed control. - Fan PWM Duty Cycle High/Low These items set the high and low limit of PWM d uty cycle that you want to provide the fan with. - DC Fan Voltage High/Low These items set the high and low voltage limit t ...

  • abit IP35 PRO XE - page 36

    2-10 IP35 Pro 2.2 Standard CMOS Features Phoenix – AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Fri, May 11 2007 Item Help Time (hh:mm:ss) 12 : 34 : 56 ► SATA Channel 1 None ► SATA Channel 3 None ► SATA Channel 2 None ► SATA Channel 4 None ► SATA Channel 5 None ► SATA Channel 6 None Drive A 1.44M, 3.5 in. Drive ...

  • abit IP35 PRO XE - page 37

    BIOS Setup IP35 Pro 2-11 HDD Auto-Detection This item allows you to detect t he parameters of hard drives by pressing <Enter> key. The parameters will be shown on the screen autom atically. SATA Channel 1 ~ SATA Channel 6 When set to [Auto], the BIOS will automatically check what kind of SAT A hard drive you are using. If you want to define y ...

  • abit IP35 PRO XE - page 38

    2-12 IP35 Pro [All, But Keyboard]: The system-b oot will stop for all errors except a keyboard error. [All, But Diskette]: The system-boot will stop for all errors except a diskette error. [All, But Disk/Key]: The system-boot will stop for all errors excep t a diskette or keyboard error. Base Memory This item displays the amount of base m emory ins ...

  • abit IP35 PRO XE - page 39

    BIOS Setup IP35 Pro 2-13 2.3 Advanced BIOS Features Phoenix – AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU L3 Cache Enabled Item Help ► CPU Feature Press Enter ► Hard Disk Boot Priority Press Enter Hyper-Threading Technology Enabled Quick Power On Self Test Enabled First Boot Device Floppy Second Boot Device Hard Disk Third Boot De ...

  • abit IP35 PRO XE - page 40

    2-14 IP35 Pro Leave this item at its default [Disabled] settings for OS like Wind ows XP. C1E Function This item appears only for certain processors with the C1E (Enhanced Halt State) Function. When set to [Enabled], the processor will further reduce the total p ower consumption. Execute Disable Bit This item appears only for certain processors wit ...

  • abit IP35 PRO XE - page 41

    BIOS Setup IP35 Pro 2-15 Boot Up Floppy Seek When set to [Enabled], the BIOS will check whether the flopp y disk drive is installed or not. Boot Up NumLock Status This item determines the default state of the numeric keypad at system booting up. [On]: The numeric keypad functions as number keys. [Off]: The numeric keypad functions as arrow keys. Se ...

  • abit IP35 PRO XE - page 42

    2-16 IP35 Pro 2.4 Advanced Chipset Features Phoenix – AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectable By SPD Item Help x - CAS Latency Time (tCL) Auto x - RAS# to CAS# Dealay (tRCD) Auto x - RAS# Precharge (tRP) Auto x - Precharge Delay (tRAS) Auto x - Refresh Cycle Time (tRFC) Auto x - Write Recovery Time (tWR) Auto ...

  • abit IP35 PRO XE - page 43

    BIOS Setup IP35 Pro 2-17 2.5 Integrated Peripherals Phoenix – AwardBIOS CMOS Setup Utility Integrated Peripherals ► OnChip SATA Device Press Enter Item Help ► OnChip PCI Device Press Enter ► Onboard PCI Device Press Enter Onboard FDC Controller Enabled  :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Pre ...

  • abit IP35 PRO XE - page 44

    2-18 IP35 Pro  O nChip PCI Device Click <Enter> key to enter its submenu: Phoenix – AwardBIOS CMOS Setup Utility OnChip PCI Device OnChip Audio Controller Enabled Item Help ► USB Device Setting Press Enter  :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Op ...

  • abit IP35 PRO XE - page 45

    BIOS Setup IP35 Pro 2-19 [High Speed]: All USB devices operate on high-speed mode. [Full/Low Speed]: All USB devices operate on full/low-speed mod e. - USB Keyboard Support Via Select [ BIOS ] for the legacy operat ing system (suc h as DOS) that does not support USB keyboard. - USB Mouse Support Via Select [ BIOS ] for the legacy operat ing system ...

  • abit IP35 PRO XE - page 46

    2-20 IP35 Pro Options: [IDE], [RAID], [AHCI].  Back to Integrated Peripherals Setup Menu Onboard FDC Controller This option enabl es or disables the floppy di sk control ler. ...

  • abit IP35 PRO XE - page 47

    BIOS Setup IP35 Pro 2-21 2.6 Power Management Setup Phoenix – AwardBIOS CMOS Setup Utility Power Management Setup ACPI Suspend Type S3(Suspend-To-RAM) Item Help - Resume by USB from S3 Enabled Power Button Function Instant-Off Wake Up by WAKE# of PCIe Disabled Wake Up by PME# of PCI Disabled Wake Up by Onboard LAN1 Disabled Wake Up by Onboard LAN ...

  • abit IP35 PRO XE - page 48

    2-22 IP35 Pro Resume by Alarm When set to [ Enabled ], you can set the date and time you would like the Soft-Off PC to power-on in the “ Date (of Month) Alarm ” and “ Time (hh:mm:ss) Alarm ” items. However, if the system is being accessed by incoming calls or the netw ork (Resume On Ring/LAN) prior to the date and time set in these items, t ...

  • abit IP35 PRO XE - page 49

    BIOS Setup IP35 Pro 2-23 [Power On]: When power returns after an AC powe r failure, the system’s power will be powered on automati cally. [Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurred. If the system’s power is off when AC power failure occurs, it ...

  • abit IP35 PRO XE - page 50

    2-24 IP35 Pro 2.8 Load Fail-Safe Defaults This option loads the BIOS default values for the most stab le, minimal-performance system operations. 2.9 Load Optimized Defaults This option loads the BIOS default values that are factory settings for op timal-performance system operations. 2.10 Set Password This option protects the BIOS configuration or ...

  • abit IP35 PRO XE - page 51

    Driver & Utility IP35 Pro 3-1 3. Driver & Utility The “Driver-&-Utility CD” that came packed with this m otherboard contains drivers, utilities and software applications required for its ba sic and advanced features. 3.1 CD-ROM AUTORUN To run the CD-ROM automatically: 1. Place the “Driver-&-Utility CD” into the CD-ROM drive ...

  • abit IP35 PRO XE - page 52

    3-2 IP35 Pro 3.2 Intel Chipset Software Installation Utility To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ Intel Chipset Software Installation Utility ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 3.3 Intel Matrix Storage Manager This ...

  • abit IP35 PRO XE - page 53

    Driver & Utility IP35 Pro 3-3 3.4 Audio Driver To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ Audio Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 4. After restarting the system, right-click the Sound Manager icon located at ...

  • abit IP35 PRO XE - page 54

    3-4 IP35 Pro 3.5 LAN Driver To install this program: 1. Click on the [ Drivers ] tab in the installation menu screen. 2. Click the [ LAN Driver ] item. The installation screen appears. 3. Follow the prompts on the screen to complete installation. 3.6 JMicron SATA Driver This driver provides functionality for the onboard SATA RAID Controller. ※ Th ...

  • abit IP35 PRO XE - page 55

    Driver & Utility IP35 Pro 3-5 3.8 abit μ Guru The μ Guru Utility combined with the optional Guru Panel allow s you to access and select system performance of your sy stem while playin g games, listening mus ic, browsing Internet or office applications in full screen with no need to stop or close the running application. To install this utilit ...

  • abit IP35 PRO XE - page 56

    3-6 IP35 Pro 3.9 SATA RAID Driver (for Windows Vista) The Raid Driver needed when installing Windows Vista operating system is located at the following path of your CD-ROM drive after p lacing the “Driver-&-Utility CD” into it: For a RAID configuration connected among “SATA1 ~ SATA6” connectors: For Vista 32bit  CD-ROM Drive:Drivers ...

  • abit IP35 PRO XE - page 57

    Multilingual QIG IP35 Pro 4-1 4. Multilingual Quick Installation Guide 4.1 Français//Guide d'Installation Rapide Ce “Guide d’Installation rapi de ” contient seulement l information de base dont vous pouvez avoir besoin lors de l’installation de votre c arte mère abit. Pour des opérations plus avancées, vous devez vous reporter à l ...

  • abit IP35 PRO XE - page 58

    4-2 IP35 Pro 4.2 Deutsch//Kurze Installationsanleitung Diese “Kurze Installationsan leitung” enthält nur die grundlegenden Har dwareinformat ionen, die Sie zur Installation Ihres abit-Motherboards be nötigen. Details finden Sie im ausführ lichen Handbuch. Vorsichtsmaßna hmen beim Einrichte n der Hardwar e • Vor Installation des Motherboar ...

  • abit IP35 PRO XE - page 59

    Multilingual QIG IP35 Pro 4-3 4.3 Italiano//Guida all’installazione rapida Questa “Guida all’ins tallazione rapida ” contiene solame nte le informazioni di b ase sull’hardware necessarie all’installazione de lla scheda ma dre abit. Fare r iferimento alla versione completa della guida per ese guire le operazioni avanzate. Precauzioni sul ...

  • abit IP35 PRO XE - page 60

    4-4 IP35 Pro 4.4 Español//Guía rápida de instalación Esta “Guía de insta lación rápida” contie ne solamente la información b ásica sobre el hard ware que puede n ecesitar durante la instalación de la pl aca base abit. Para conocer el funcionamien to avanzado, es n ecesario consultar l a versión completa. Precauciones duran te la conf ...

  • abit IP35 PRO XE - page 61

    Multilingual QIG IP35 Pro 4-5 4.5 Português//Guia de instalação rápida Este “Guia de instal ação rápida” cont ém apenas informação essenci al sobre o hardw are e necessária à instalação da sua p laca princip al abit. Para mais informações, terá de co nsultar a versão in tegral deste guia. Normas de segurança a ter em conta du ...

  • abit IP35 PRO XE - page 62

    4-6 IP35 Pro 4.6 Русский // Краткое руководство по установке В “ Кратком руководстве по установке ” содержится только основная информация о техническом обеспечении , которая вам может понадобиться ...

  • abit IP35 PRO XE - page 63

    Multilingual QIG IP35 Pro 4-7 4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaig aldusjuhen d” sisaldab ai nult abit-emaplaadi p aigaldamiseks vajal ikku riistvaraalast põhiteavet. Edasijõudnud kasuta miseks tuleb teil ikkagi pöörduda täisversiooni poole. Ettevaatusabinõud riist vara paigaldamisel • Enne emaplaadi paigaldamist võ i üm ...

  • abit IP35 PRO XE - page 64

    4-8 IP35 Pro 4.8 Latviski// Ā tr ā s instal ē šanas instrukcija Š ī “ Ā tr ā s instal ē šanas instrukcij a” ietver tikai pamata nor ā des iek ā rtai, kas nepieciešamas, instal ē jot abit m ā tesplati. Piln ī g ā kai darb ī bai nepieci ešams ieg ū t instrukcijas pap lašin ā to variantu. Piesardz ī bas pas ā kumi iek ā rt ...

  • abit IP35 PRO XE - page 65

    Multilingual QIG IP35 Pro 4-9 4.9 Lietuvi ų //Trumpas instaliavimo vadovas Šiame “Trumpame instali avimo vadove” pateikta tik esmin ė informacija apie technin ę į rang ą , kurios jums gali pr ireikti instaliuojant pagrindin ę plok št ę abit. Papildom ų opera cij ų aprašym ą rasite pilno je vadovo versijo je. Atsargumo pr iemon ė s ...

  • abit IP35 PRO XE - page 66

    4-10 IP35 Pro 4.10 Polski//Instrukcja szybkiej instalacji Ta “Instrukcja szybki ej instalacji” zaw iera tylko podstawowe informac je dotycz ą ce sprz ę tu, wymaga ne podczas instala cji p ł yty g ł ównej abit. Przy zaawansowanych operacjach, ni ezb ę dne b ę dzie skorzysta nie z kompletnej wer sji instrukcji. Ś rodki bezpiecze ń stwa p ...

  • abit IP35 PRO XE - page 67

    Multilingual QIG IP35 Pro 4-11 4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmu tató” csak azt az alapvet ő hardver információ t tartalmazza, amely az abit al aplap telepítéséhez szükséges. Az el ő rehaladott ü zemeltetéshez, továbbra is a teljes útmu tatót kell használni a. Hardver beállítási óvintéz ...

  • abit IP35 PRO XE - page 68

    4-12 IP35 Pro 4.12 Türkçe//H ı zl ı Kurulum K ı lavuzu Bu “H ı zl ı Kurulum K ı lavuzu”, abit an akart ı n ı z ı takman ı zda gerekebilecek sadece temel donan ı m bilgisini içermekt edir. İ leri i ş lemler iç in daha geni ş olan tam versiyonuna ba ş vurman ı z gerekecektir. Donan ı m Kurmada Al ı nacak Önl emler • Anaka ...

  • abit IP35 PRO XE - page 69

    Multilingual QIG IP35 Pro 4-13 4.13 ﺔﻴﺑﺮﻌﻟا ﺔﻐﻠﻟا // ﻊﻳﺮﺴﻟا ﺐﻴآﺮﺘﻟا ﻞﻴﻟد ...

  • abit IP35 PRO XE - page 70

    4-14 IP35 Pro 4.14 ﯽﺳرﺎﻓ // ﻊﻳﺮﺳ ﺐﺼﻧ ﯼﺎﻤﻨهار ...

  • abit IP35 PRO XE - page 71

    Multilingual QIG IP35 Pro 4-15 4.15 日本語 // クイックインストールガイド この「クイックインストールガイド」には、abit マ ザーボードを取り付けるときに必要となるハードウ ェアの基本情報のみが含まれています。詳細な操作 については、その完全版を参照してく? ...

  • abit IP35 PRO XE - page 72

    4-16 IP35 Pro 4.16 한국어 / / 빠른 설치 가이드 본 “ 빠른 설치 가이드 ” 는 빅빔 abit 메인보드 설치에 필요한 중요한 하드웨어 정보만을 포함하고 있습니다 . 보다 상세한 정보 및 과정은 사용자 설명서를 참고하시기 바랍니다 . 하드웨어 설치시 주의사항 • 메인보드 ...

  • abit IP35 PRO XE - page 73

    Multilingual QIG IP35 Pro 4-17 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas “Panduan Pemasangan Ringkas” ini hanya mengandungi maklumat perkakasan asas ya ng anda mungk in perlu semasa memasang papan induk abit anda. Untuk pengendalian lanjuta n, anda perlu rujuk k e versi lengkapnya. Langkah Berjaga-j aga bagi Penyed iaan Perkakasan • Se ...

  • abit IP35 PRO XE - page 74

    4-18 IP35 Pro 4.18 ไทย // คู่มื อการต ิ ดต ั้ งอย ่ างย ่อ ข้ อม ู ลทางเทคน ิ คของอ ุ ปกรณ ์ที่ ปรากฎใน “ คู่มื อการ ติ ดต ั้ งอย ่ างย ่อ ” นี้ เป ็ นเพ ? ...

  • abit IP35 PRO XE - page 75

    Multilingual QIG IP35 Pro 4-19 4.19 繁體中文 4.19.1 規格 處理器 • LGA775 插座支援 Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo 以及 Pentium Extreme Edition / Pentium Dual Core / Pentium D / Pentium 4 的 Intel 處 理器 • 支援 1333MHz 前端匯流排 晶片組 • Intel P35 / ICH9R 記憶體 • 4 條 240 針腳 DIMM 插? ...

  • abit IP35 PRO XE - page 76

    4-20 IP35 Pro 4.19.2 快速安裝略說 本「快速安裝略說」僅包含安裝 abi t 主機板時所需的 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 手冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔 掉電源插頭。 • 從抗靜電袋中取出機板前? ...

  • abit IP35 PRO XE - page 77

    Multilingual QIG IP35 Pro 4-21 4.20 简体中文 4.20.1 规格 处理器 • LGA775 插座支持 Core 2 Extreme Edition / Core 2 Quad / Core 2 Duo 以及 Pentium Extreme Edition / Pentium Dual Core / Pentium D / Pentium 4 的 Intel 处 理器 • 支持 1333MHz 前端总线 芯片组 • Intel P35 / ICH9R 内存 • 4 条 240 针脚 DIMM 插槽支? ...

  • abit IP35 PRO XE - page 78

    4-22 IP35 Pro 4.20.2 快速安装略说 本“快速安装略说”仅包含基本的硬件信息，供您在 安装 abit 主板时进行参考。如需了解高级操作，仍请 参阅其完整的手册版本。 硬件设置注意事项 • 在安装主板或更改任何设置前，务必关闭电源并从 交流插座上拔掉电源线。 • ? ...

  • abit IP35 PRO XE - page 79

    Appendix IP35 Pro 5-1 5. Appendix 5.1 POST Code Definitions 5.1.1 AWARD POST Code Definitions POST (hex) Description CF Test CMOS R/W functionality C0 Early chipset initialization: -Disable shadow RAM -Disable L2 cache (socket 7 or below) -Program basic chipset registers C1 Detect memory -Auto-detection of DRAM size, type and ECC -Auto-detection of ...

  • abit IP35 PRO XE - page 80

    5-2 IP35 Pro 26 1. If Early_In it_Onboa rd_Generator is not defined Onboar d clock generator initialization. Disable respective clock resour ce to empty PCI & DIMM slots. 2. Init onboard PWM 3. Init onboard H/W monitor devices 27 Initialize INT 09 buffer 29 1. Program CPU internal MTRR (P6 & PII) for 0-640K memory address. 2. Initialize the ...

  • abit IP35 PRO XE - page 81

    Appendix IP35 Pro 5-3 76 (Optional Feature) Enter AWDFLASH.EXE if: -AWDFLASH is found in floppy drive -ALT+F2 is pressed 77 Detect serial ports & parallel ports. 7A Detect & install co-processor 7C Init HDD write protect 7F Switch back to text mode if full screen logo is supported -If errors occur, report errors & wait for keys -If no e ...

  • abit IP35 PRO XE - page 82

    5-4 IP35 Pro 5.1.2 AC2005 POST Code Definitions POST (hex) Description Power On Sequence 8.1. Start power on sequence 8.2. Enable ATX power supply 8.3. ATX power supply ready 8.4. DDR voltage ready 8.5. Setup PWM for CPU core voltage 8.6. Assert PWM for CPU core voltage 8.7. Check CPU core voltage 8.8. CPU core voltage ready 8.9. Initial clock gene ...

  • abit IP35 PRO XE - page 83

    Appendix IP35 Pro 5-5 5.2 Troubleshooting (How to Get Technical Support?) 5.2.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes, we highly recommend that you clear the CM OS before installi ng a new motherboard. Please move the CMOS jumper from its default 1-2 position to 2-3 for a ...

  • abit IP35 PRO XE - page 84

    5-6 IP35 Pro Q: How to get a quick response for my request on technical support? A: P lease carry out a simple troubl eshooting befo re sending “ Technical Support Form ”: System boot-up fails after the system had been assembled: Check the motherboard’s supporting sp ecifications first to see if all the key components attached in your system ...

  • abit IP35 PRO XE - page 85

    Appendix IP35 Pro 5-7 • Memory configuration: Type in the memory configuration in BIOS setting . Example: Memory Timing: 2.5-3-3- 7 @533MHz • Graphics information: Note Graphics card’s brand, model and driver versio n • Graphics card: Type in the brand and model name o f your graphics c ard. Example: ATI RADEON X850 XT PE • Graphics drive ...

  • abit IP35 PRO XE - page 86

    5-8 IP35 Pro 5.2.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply watt age: Storage devices: Optical devices: Other devices: Operating system: Problem descripti on: ...

  • abit IP35 PRO XE - page 87

    Appendix IP35 Pro 5-9 5.2.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. 6F, No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit.com.tw Marketing: market@abit.com.tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U.S. ...

  • abit IP35 PRO XE - page 88

    P/N: 4310-0000-89 Rev. 2.00 http://www.abit.com.tw ...

Manufacturer abit Category Motherboard

Documents that we receive from a manufacturer of a abit IP35 PRO XE can be divided into several groups. They are, among others:
- abit technical drawings
- IP35 PRO XE manuals
- abit product data sheets
- information booklets
- or energy labels abit IP35 PRO XE
All of them are important, but the most important information from the point of view of use of the device are in the user manual abit IP35 PRO XE.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals abit IP35 PRO XE, service manual, brief instructions and user manuals abit IP35 PRO XE. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product abit IP35 PRO XE.

Similar manuals

A complete manual for the device abit IP35 PRO XE, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use abit IP35 PRO XE by users. Manuals are usually written by a technical writer, but in a language understandable to all users of abit IP35 PRO XE.

A complete abit manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual abit IP35 PRO XE - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the abit IP35 PRO XE, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the abit IP35 PRO XE, that we can find in the current document
3. Tips how to use the basic functions of the device abit IP35 PRO XE - which should help us in our first steps of using abit IP35 PRO XE
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with abit IP35 PRO XE
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of abit IP35 PRO XE in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning abit IP35 PRO XE?

Use the form below

If you did not solve your problem by using a manual abit IP35 PRO XE, ask a question using the form below. If a user had a similar problem with abit IP35 PRO XE it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)