English dropdown-ico

Manual Enterasys X-Pedition XSR CLI

684 pages 6.2 mb
Download

Go to site of 684

Summary
  • Enterasys X-Pedition XSR CLI - page 1

    X-Pedition ™ Security Router XSR CLI Reference Guide Ve r s i o n 7 . 6 P/N 9033842-07 ...

  • Enterasys X-Pedition XSR CLI - page 2

    ...

  • Enterasys X-Pedition XSR CLI - page 3

    -i Notice Enterasys Networks reserves the right to ma ke changes in specificatio ns and other informat ion contained in this document and its W eb site without prior notice. The read er should in all cases cons ult Enterasys Networks to determi ne whether any such changes have been made. The hardwar e, firmwar e, or software described in th is docu ...

  • Enterasys X-Pedition XSR CLI - page 4

    0 Enterasys Networks, Inc. FIRMW ARE LICENSE AGREEMENT BEFORE  OPENING  OR  UTILIZIN G  THE  ENCL OSED  PRODUCT , CAREFULL Y  READ  THIS  LICENSE  AGREEMENT . This  document  is  an  agreemen t  (“ Agreemen t”)  between  the  end  user  (“Y ou”)  and  Enterasys  Networks, ...

  • Enterasys X-Pedition XSR CLI - page 5

    i 4) EXPOR T  RESTRICTIONS. Yo u  understand  that  Enteras ys  and  its  Affiliates  are  subject  to  regula tion  by  agencies  of  the  U.S.  Gov ernment,  including  the  U.S.  Departme nt  of  Commerce,  which  prohibit  export  or  diversion  of  certai ...

  • Enterasys X-Pedition XSR CLI - page 6

    ii 9) OWNERSHIP . This  is  a  license  agreement  and  not  an  agreement  for  sale.  Yo u  acknowledge  and  agree  that  the  Program  constitutes  trade  secrets  and/or  copyrighted  mat erial  of  Enterasys  and/or  it s  suppliers.  Yo u  agree  to ...

  • Enterasys X-Pedition XSR CLI - page 7

    v Contents Preface Chapter 1: Network Management Observing Syntax and Conv entions ................ ................ ................... ................ ................. .......... ............ ..... 1-1 Network Management Commands ............... ................ ................... ................ ................ ................. ...... .... ...

  • Enterasys X-Pedition XSR CLI - page 8

    vi ARP Commands .... ................ ................ ................ ................ ................. ................ ............. ............ ........... 5-149 Other IP Commands .... ................ ................. ................ ................ ................ ................ ........ .................. .... 5-151 IP Clear and Sho ...

  • Enterasys X-Pedition XSR CLI - page 9

    vii QoS Show Commands ................ ................. ................ ................ ................ ................... ......... ................ 12-105 Chapter 13: Configuring ADSL Observing Syntax and Conv entions ................ ................ ................... ................ ................. .......... ............ . 13-83 ADSL ...

  • Enterasys X-Pedition XSR CLI - page 10

    viii ...

  • Enterasys X-Pedition XSR CLI - page 11

    XSR User’s Guid e ix Preface This  guide  describes  the  Command  Line  Interface  (CLI)  commands  needed  to  mount,  connect,  power ‐ up,  and  maintain  an  XSR  from  Enterasys  Netw orks. This  guide  is  written  for  administrators  who  wan t  to  ...

  • Enterasys X-Pedition XSR CLI - page 12

    x Conventions Used in This Guide The  following  conventions  are  used  in  this  guide: Getting Help For  additional  support  related  to  the  XSR,  contact  Enterasys  Netw orks  using  one  of  the  following  methods: Caution: Contains information essential to avoid damage to ...

  • Enterasys X-Pedition XSR CLI - page 13

    XSR User’s Guid e xi Before  contacting  Ente rasys  Networks  for  technical  support,  have  the  fol lowing  information  ready: •Y o u r  Enterasys  Networks  service  contract  number •A  description  of  the  failure •A  description  of  any  action(s)  already ...

  • Enterasys X-Pedition XSR CLI - page 14

    xii ...

  • Enterasys X-Pedition XSR CLI - page 15

    XSR CLI Reference Guide 1-1 1 Network Management Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. Network Management C ommands This  chapter  includes  the  following  subsets  of  network  management  comm ...

  • Enterasys X-Pedition XSR CLI - page 16

    General Network Management Commands 1-2 Network Management General Network Management Commands banner This  command  cr eates  a  login  banner  at  the  XSR’ s  CLI  prompt.  Te x t  is  entered  one  line  at  time  and  should  not  exceed  80  characters  per  line. ? ...

  • Enterasys X-Pedition XSR CLI - page 17

    General Network Management Commands XSR CLI Reference Guide 1-3 crypto key dsa This  command  generates  the  Digital  Signature  Algorithm  (DSA)  type  host  key  pair  (pri va te  and  public)  as  we ll  as  displays  the  public  key .  A  unique  set  of  host  k ...

  • Enterasys X-Pedition XSR CLI - page 18

    General Network Management Commands 1-4 Network Management Example XSR#disable enable This  command  jumps  to  Privileged  EXEC  mode. Synt ax enable Mode EXEC:  XSR> Example XSR>enable end This  command  terminates  configuration  mode. Synt ax end Mode Any  configuration Example XSR(config)#end exit This ...

  • Enterasys X-Pedition XSR CLI - page 19

    General Network Management Commands XSR CLI Reference Guide 1-5 help This  command  retrieves  he lp  at  any  Mode. Synt ax help Mode All Example XSR#help ip http port This  command  changes  the  HTTP  (Hyper  Te x t  Tr a n s f e r  Protocol)  port  where  incoming  HTTP  (W eb)  sessio ...

  • Enterasys X-Pedition XSR CLI - page 20

    General Network Management Commands 1-6 Network Management Synt ax ip http server [ enable | disable ] Synt ax of the “no” Form The  no  form  of  this  command  disables  the  HTTP  serv er: no ip http server Mode Global  configuration:  XSR(config)# Default Disable Examples XSR(config)#ip http server enable XS ...

  • Enterasys X-Pedition XSR CLI - page 21

    General Network Management Commands XSR CLI Reference Guide 1-7 •P o r t  number  22 Example XSR(config)#ip ssh server enable ip telnet port This  command  changes  the  Te l n e t  port  where  incoming  Te l n e t  sessions  connect  to. Synt ax ip telnet port { port_number | default } Mode Global  conf ...

  • Enterasys X-Pedition XSR CLI - page 22

    General Network Management Commands 1-8 Network Management Mode Global  configuration:  XSR(config)# Default Enabled Examples XSR(config)#ip telnet server enable XSR(config)#no ip telnet server ping This  network  connectivity  command,  whi ch  applies  to  IP  pin g  only ,  sends  fiv e  echo  request ...

  • Enterasys X-Pedition XSR CLI - page 23

    General Network Management Commands XSR CLI Reference Guide 1-9 Reply from 192.168.27.165: 10ms Reply from 192.168.27.165: 10ms Reply from 192.168.27.165: 10ms Reply from 192.168.27.165: 10ms Packets: Sent = 5, Received = 5, Los t = 0 The  following  example  shows  the  destination  lost  afte r  three  pings: XSR>pin ...

  • Enterasys X-Pedition XSR CLI - page 24

    General Network Management Commands 1-10 Network Management Mode Global  configuration:  XSR(config)# Default s •P r i v i l e g e  level  0:  all  statistics  ( show )  commands  with  low ‐ level  security  su ch  as  show version , show clock ,  etc. •P r i v i l e g e  levels  1  throu ...

  • Enterasys X-Pedition XSR CLI - page 25

    General Network Management Commands XSR CLI Reference Guide 1-11 session-timeout This  command  sets  the  interv al  for  closing  a  connection  when  there  is  no  input.  If  the  keyw ord  console,  ssh,  or  Te l n e t  is  used,  the  timeout  becomes  the  def ...

  • Enterasys X-Pedition XSR CLI - page 26

    General Network Management Commands 1-12 Network Management •W i d t h :  132  characters •0  means  no  limit Example XSR#terminal width 40 XSR#terminal length 40 traceroute This  command  gathers  information  regarding  the  route  that  IP  datag rams  follow  to  a  specified  destin ...

  • Enterasys X-Pedition XSR CLI - page 27

    General Network Management Commands XSR CLI Reference Guide 1-13 username This  command  adds  a  user ,  privileg e  level,  passw ord,  and  encryption  type  for  those  accessing  the  XSR.  Assigni ng  privilege  lev e ls  lets  you  control  which  users  can  mana ge ...

  • Enterasys X-Pedition XSR CLI - page 28

    General Show Commands 1-14 Network Management Mode Global  configuration:  XSR(config)# Default s •U s e r n a m e :  admin • P assword:  ““  (null  or  zero  length  string) •N e w  user  level:  0  unless  expli citly  set •P r i v i l e g e  for  special  user  admin :  15 ? ...

  • Enterasys X-Pedition XSR CLI - page 29

    General Show Commands XSR CLI Reference Guide 1-15 Sample Output The  following  output  display s  public  key: XSR(config)#crypto key dsa show ---- BEGIN SSH2 PUBLIC KEY ---- Subject: root Comment: "1024-bit dsa, administrato r@Robo1, Mon Mar 03 2003 05:06:16 " AAAAB3NzaC1kc3MAAACBAIgwEkVM26GpC9L+ cu9HnXps8S6Qlrhp7mwGudUY ...

  • Enterasys X-Pedition XSR CLI - page 30

    snmp-server Commands 1-16 Network Management Sample Output The  following  is  output  from  the  ip telnet  command: XSR#show ip telnet TELNET Information: Telnet Server: Enabled Telnet Port: 23 Active Telnet Sessions: 1 snmp-server Commands This  command  set  configures  the  SNMP  agent  on  the  ...

  • Enterasys X-Pedition XSR CLI - page 31

    snmp-server Commands XSR CLI Reference Guide 1-17 Yo u  can  download  Enterasys  MIBs  fr om  the  following  We b  site: http://www .enterasys.com/support/mibs/ Enterasys  Configuration  Management This  MIB  allows  an  SNMP  management  entity  to  upload  and  download  executab ...

  • Enterasys X-Pedition XSR CLI - page 32

    snmp-server Commands 1-18 Network Management snmp-server community This  command  allows  a  community  string  to  access  MIBs  in  the  XSR. Synt ax snmp-server community community-stri ng [ view view-name ][ ro | rw ] [ access-list - num ]  Synt ax of the “no” Form The  no  form  of  this  ...

  • Enterasys X-Pedition XSR CLI - page 33

    snmp-server Commands XSR CLI Reference Guide 1-19 Synt ax of the “no” Form The  no  form  of  this  command  offers  no  contact  information: no snmp-server contact Mode Global  configuration:  XSR(config)# Default Null  string Example XSR(config)#snmp-server contact Larr yCurtis@enterasys.com XSR(config)#sn ...

  • Enterasys X-Pedition XSR CLI - page 34

    snmp-server Commands 1-20 Network Management Synt ax of the “no” Form The  no  form  of  this  command  disables  the  sending  of  specified  traps: no snmp-server enable traps [[ snmp [ authentication ]] entity | frame-relay ] Mode Global  configuration:  XSR(config)# Default Disabled Examples To  ena ...

  • Enterasys X-Pedition XSR CLI - page 35

    snmp-server Commands XSR CLI Reference Guide 1-21 Mode Global  configuration:  XSR(config)# Example The  following  example  specifies  the  Engine  ID: XSR(config)#snmp-server engineID loc al 00020AF100 results  in  an  engine  ID  of  0x800015F80500020A F100 snmp-server group This  command  configur ...

  • Enterasys X-Pedition XSR CLI - page 36

    snmp-server Commands 1-22 Network Management snmp-server host This  command  specifies  host  parameters  of  the  SNMP  serv er;  it  adds  a  new  man agement  station  to  send  traps  to.  If  the  address  already  exists,  the  command  will  update  the  s ...

  • Enterasys X-Pedition XSR CLI - page 37

    snmp-server Commands XSR CLI Reference Guide 1-23 Example The  following  examples  illustrate  an  SNMP  host  with  trap  on  and  off : XSR(config)#snmp-server host 192.168 .1.10 traps trapsOn XSR(config)#no snmp-server host 192. 168.2.11 Sample Output The  following  are  three  sample  outputs ? ...

  • Enterasys X-Pedition XSR CLI - page 38

    snmp-server Commands 1-24 Network Management Example This  example  shows  an  inform  with  1  retry ,  a  5 ‐ second  timeout  and  a  10  pending  val u e : XSR(config)#snmp-server informs retr ies 1 timeout 5 pending 10 snmp-server location This  command  specifies  the  location  of ...

  • Enterasys X-Pedition XSR CLI - page 39

    snmp-server Commands XSR CLI Reference Guide 1-25 Default 0  traps  (unlimited) Example The  following  example  sets  the  traps  permitted  to  1000: XSR(config)#snmp-server max-traps-pe r-window 1000 snmp-server min-trap-sp acing This  command  sets  the  interv al  betw een  successiv e  SNMP ? ...

  • Enterasys X-Pedition XSR CLI - page 40

    snmp-server Commands 1-26 Network Management Synt ax of the “no” Form The  no  form  sets  the  maximum  allow ed  incoming  and  outgoing  packetsize  to  the  default: no snmp-server packetsize Mode Global  configuration:  XSR(config)# Default 1,500  bytes Example The  following  example ? ...

  • Enterasys X-Pedition XSR CLI - page 41

    snmp-server Commands XSR CLI Reference Guide 1-27 Synt ax snmp-server set entityMIB { entPhysic alAlias | entPhysicalAssetID } host < strin g > Synt ax of the “no” Form The  no  command  sets  the  PhysicalAlias  or  PhysicalAssetID  in  the  Entity  MIB  as  an  empty  string: no snmp-server s ...

  • Enterasys X-Pedition XSR CLI - page 42

    snmp-server Commands 1-28 Network Management snmp-server t f t p-server-list This  command  specifies  an  Access  Control  List  (A CL)  to  limit  TF TP  serv ers’  access  during  SNMP  downloads. Synt ax snmp-server tftp-server-list access- list-num Synt ax of the “no” Form The  no  form ...

  • Enterasys X-Pedition XSR CLI - page 43

    snmp-server Commands XSR CLI Reference Guide 1-29 snmp-server trap-timeout This  command  specifies  the  interval  traps  in  the  retransmission  queue  are  retried  if  no  route  exists  to  the  host  that  SNMP  traps  will  to  be  sent  to. Synt ax snmp-server tr ...

  • Enterasys X-Pedition XSR CLI - page 44

    snmp-server Commands 1-30 Network Management Synt ax of the “no” Form Use  the  no  form  of  this  command  to  remov e  a  user: no  snmp-server user username group name { v1 | v2c | v3 } Mode Global  configuration:  XSR(config)# Example The  example  below  configures  ljc  of  the  ...

  • Enterasys X-Pedition XSR CLI - page 45

    snmp-server Commands XSR CLI Reference Guide 1-31 Mode Global  configuration:  XSR(config)# Examples The  following  example  creates  a  view  of  all  objec ts  on  the  XSR: XSR(config)#snmp-server view v3view internet included The  following  example  creates  a  view  of  all  obje ...

  • Enterasys X-Pedition XSR CLI - page 46

    snmp-server Commands 1-32 Network Management at 1.3. 6.1.2. 1.3 atEntry 1.3.6 .1.2.1 .3.1.1 ip 1.3. 6.1.2. 1.4 ipAddrEn try 1.3.6.1 .2.1.4.20 .1 ipRouteEnt ry 1.3.6. 1.2.1.4. 21.1 ipNetT oMedi aEntry 1. 3.6.1.2.1 .4.22.1 icmp 1.3. 6.1.2. 1.5 tcp 1.3.6.1 .2.1.6 tcpConnEntry 1.3.6.1.2.1. 6.13.1 udp 1.3.6 .1.2.1.7 udpEntry 1.3. 6.1.2. 1.7.5.1 egp 1.3. ...

  • Enterasys X-Pedition XSR CLI - page 47

    snmp-server Commands XSR CLI Reference Guide 1-33 snmp-server window-time This  command  specifies  the  length,  in  seconds,  of  the  moving  window  used  to  count  the  number  of  traps  sent. Synt ax snmp-server window-time time Synt ax of the “no” Form The  no  form  of  ...

  • Enterasys X-Pedition XSR CLI - page 48

    SNMP Show Commands 1-34 Network Management SNMP Show Commands show snmp This  command  information  about  the  SNMP  server . Synt ax show snmp [ location ] Mode Privileged  EXEC:  XSR# Sample Output The  following  is  sample  output  from  the  command: XSRtop(config)#show snmp Chassis serial#: 000001 ...

  • Enterasys X-Pedition XSR CLI - page 49

    SNMP Show Commands XSR CLI Reference Guide 1-35 0 Silent drops 0 Proxy drops The  example  below  shows  output  with  the  location  option  entered: XSR#show snmp location Haverhill Mass. show snmp engineID This  command  displays  the  identification  of  the  local  SNMP  engine. Synt ax sho ...

  • Enterasys X-Pedition XSR CLI - page 50

    SNMP Show Commands 1-36 Network Management grouname: nm security model: v3 auth readview: v1default wirteview: nmMIBIIview notifyview: nmMIBIIview The  following  is  sample  output  from  the  command: XSR#show snmp group groupname: v3RWGroup security model: v3 readview: v3view writeView: v3view notifyview: <no notifyview s ...

  • Enterasys X-Pedition XSR CLI - page 51

    SLA Agent Commands XSR CLI Reference Guide 1-37 User name: authprivUser group: v3RWGroup Engine ID: 800015f8030001f423e691 storage-type: nonvolatile active Parameter Description show snmp view This  command  displays  information  on  each  SNMP  view  in  the  gro up  username  table. Synt ax show snmp view Mode ...

  • Enterasys X-Pedition XSR CLI - page 52

    SLA Agent Commands 1-38 Network Management Synt ax aggregate-period period Synt ax of the “no” Form The  no  form  of  this  command  returns  to  the  default  va l u e : aggregate-period period Mode RTR  Echo  configuration:  XSR(config-rtr-echo- xx )# Default 600  seconds Example The  following ? ...

  • Enterasys X-Pedition XSR CLI - page 53

    SLA Agent Commands XSR CLI Reference Guide 1-39 Example This  example  sets  the  buckets ‐ of ‐ history  val u e  to  5  records: XSR(config-rtr-echo-1)#buckets-of-hi story-kept 5 frequency This  command  specifies  how  frequently  to  send  a  Response  Time  Reporter  (RTR)  probe. ...

  • Enterasys X-Pedition XSR CLI - page 54

    SLA Agent Commands 1-40 Network Management Mode RTR  Echo  configuration:  XSR(config-rtr-echo- xx )# Example The  following  example  creates  an  RTR  map: XSR(config-rtr-echo-57)#map "network in Peoria" owner This  command  binds  a  Response  Time  Reporter  (RTR)  owner  (administ ...

  • Enterasys X-Pedition XSR CLI - page 55

    SLA Agent Commands XSR CLI Reference Guide 1-41 Mode RTR  Echo  configuration:  XSR(config-rtr-echo- xx )# Default Pa y l o a d  size :  12  bytes Example The  following  example  limits  the  RTR  payload  size  to  32  bytes: XSR(config-rtr-echo-57)#request-data -size 32 ta g This  command  sp ...

  • Enterasys X-Pedition XSR CLI - page 56

    SLA Agent Commands 1-42 Network Management Synt ax of the “no” Form The  no  form  of  this  command  returns  to  the  default  va l u e : no timeout Mode RTR  Echo  configuration:  XSR(config-rtr-echo- xx )# Default 5000  milliseconds Example The  following  example  resets  the  RTR ? ...

  • Enterasys X-Pedition XSR CLI - page 57

    RTR-mode Commands XSR CLI Reference Guide 1-43 RTR-mode Commands rtr This  command  creates  a  Response  Time  Reporter  (RTR)  entry .  The  following  are  sub ‐ commands: • rtr owner  registers  the  RTR  administrator .  Go  to  page  1 ‐ 43  for  the  command  descr ...

  • Enterasys X-Pedition XSR CLI - page 58

    RTR-mode Commands 1-44 Network Management Default Quota:  700 Example The  following  example  registers  the  RTR  owner: XSR(config)#rtr owner operator1 192.168.57.5 email larrycurtis@enterays.com quota 1000 rtr schedule This  command  schedules  an  Response  Time  Re porter  (RTR)  entry . Synt ax rt ...

  • Enterasys X-Pedition XSR CLI - page 59

    RTR Show Commands XSR CLI Reference Guide 1-45 RTR Show Commands show rtr operation-st ate This  command  displays  the  current  operational  state  of  the  Response  Time  Reporter  (RTR). Synt ax show rtr operation-state [ operation- id ] Mode EXEC  configuration: XSR> Sample Output The  following ? ...

  • Enterasys X-Pedition XSR CLI - page 60

    RTR Show Commands 1-46 Network Management Status of Entry (SNMP RowStatus): ac tive Protocol Type: ipIcmpEcho Target Address: 192.168.57.3 Source Address: 192.168.57.43 Request Size (data portion): 12 Life (seconds): 5000 Next Scheduled Start Time: Start Tim e already passed Number of History Buckets kept: 15 show rtr history This  command  d ...

  • Enterasys X-Pedition XSR CLI - page 61

    XSR CLI Reference Guide 2-55 2 Configuring T1/E1 and T3/E3 Subsystems Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. T1/E1 & T3/E3 Commands The  following  commands  define  T1/E1  /T3/E3  subsys tem  funct ...

  • Enterasys X-Pedition XSR CLI - page 62

    T1/E1 & T3/E3 Commands 2-56 Configuring T1/E1 and T3/E3 Subsystems cablelength For T3 controllers only This  command  specifies  the  distance  of  cabling  from  the  XSR  to  the  network  equipment  for  a  T3  NIM  card  only . Synt ax cablelength feet Synt ax of the “no” Form The ...

  • Enterasys X-Pedition XSR CLI - page 63

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-57 the  received  sig nals.  This  feature  is  provided  by  placing  a  transmit  attenuator  in  the  data  path.  This  attenuation  is  selectable  from  0 ,  ‐ 7.5 ,  ‐ 15 ,  or  ‐ 22.5  dB . Synt ax cablele ...

  • Enterasys X-Pedition XSR CLI - page 64

    T1/E1 & T3/E3 Commands 2-58 Configuring T1/E1 and T3/E3 Subsystems Synt ax cablelength short  { 133 | 266 | 399 | 533 | 655 } Synt ax of the “no” form The  no  form  of  this  command  returns  the  val u e  to  the  default  setting: no cablelength short Default s 133  feet Mode Controller  conf ...

  • Enterasys X-Pedition XSR CLI - page 65

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-59 Synt ax of the “no” Form Use  the  no  form  of  the  command  to  remov e  a  channel  group: no channel-group number Default s Speed:  64  kbps  for  both  T1  and  E1  controlle rs. Mode Controller  configuration:  XSR(confi ...

  • Enterasys X-Pedition XSR CLI - page 66

    T1/E1 & T3/E3 Commands 2-60 Configuring T1/E1 and T3/E3 Subsystems Default Line Mode Controller  configuration:  XSR(config-controller < xx >)# Examples The  following  example  configures  the  T1  controller  on  NIM  1 ,  port  0  (f irst  port),  with  ESF  framing,  B8ZS  li ...

  • Enterasys X-Pedition XSR CLI - page 67

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-61 Synt ax of the “no” Form The  no  form  of  this  command  deletes  the  defined  controller: no controller { t1 | e1 | t3 | e3 }{ slot/card/port } no controller { t1 | e1 | t3 | e3 }{ card/port } Mode Global  configuration:  XSR(config)# Next Mode Controll ...

  • Enterasys X-Pedition XSR CLI - page 68

    T1/E1 & T3/E3 Commands 2-62 Configuring T1/E1 and T3/E3 Subsystems Synt ax crc { 16 | 32 } Synt ax of the “‘no” Form The  no  form  of  this  command  returns  to  the  default  setting: no crc Default 16 Mode Interface  configuration:  XSR(config-if< xx >)# Example This  example  enables ? ...

  • Enterasys X-Pedition XSR CLI - page 69

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-63 XSR(config)#controller t1 1/0 XSR(config-controller<T1-1/0>)#frami ng esf XSR(config-controller<T1-1/0>)#linec ode b8zs XSR(config-controller<T1-1/0>)#clock source line XSR(config-controller<T1-1/0>)#descr iption “Acme’s T1” The  following  example  descr ...

  • Enterasys X-Pedition XSR CLI - page 70

    T1/E1 & T3/E3 Commands 2-64 Configuring T1/E1 and T3/E3 Subsystems XSR(config-controller<T3-1/2/0>)#fra ming m13 XSR(config-controller<T3-1/2/0>)#cab lelength 250 XSR(config-controller<T3-1/2/0>)#dsu mode adtran dsu bandwid th For T3 controllers only This  command  specifies  the  peak  allowable  bandwidth ? ...

  • Enterasys X-Pedition XSR CLI - page 71

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-65 Mode Controller  configuration: XSR(config-controller xx )# Default •T 3 :  44,210  kbps  (full ‐ rate) •E 3 :  34,099.5  kbps  (full ‐ rate) Example The  following  example  configures  the  T3  controller  in  slot  1 ,  card  2 ? ...

  • Enterasys X-Pedition XSR CLI - page 72

    T1/E1 & T3/E3 Commands 2-66 Configuring T1/E1 and T3/E3 Subsystems equipment For T3/E3 controllers only This  command  configures  the  T3/E3  controller  as  network  or  customer  equipment  and  operates  according  to  the  T1.403  ANSI  standard,  allowing  equipment  configure ...

  • Enterasys X-Pedition XSR CLI - page 73

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-67 Synt ax framing { sf | esf } ( T1 ) framing { crc4 | no-crc4 } ( E1 ) framing { c-bit | m13 } ( T3 ) framing { g751 | bypass } ( E3 ) Synt ax of the “no” Form Return  to  the  defaul t  framing  setting  by  using  the  no  form: no framing Default s •T 1 : ...

  • Enterasys X-Pedition XSR CLI - page 74

    T1/E1 & T3/E3 Commands 2-68 Configuring T1/E1 and T3/E3 Subsystems interface serial This  command  configures  the  Seria l  interface  automatically  created  by  the  controller  command  in  conjunction  with  T1/E1  and  T3/E3  NIM  operations.  The  T3  module  offers  ...

  • Enterasys X-Pedition XSR CLI - page 75

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-69 Example The  following  example  configures  the  E3  controller  in  slot  1 ,  card  2  with  line  source  clocking  and  international  bits  of  0  and  0 : XSR(config)#controller e3 1/2/0 XSR(config-controller<E3-1/2/0& ...

  • Enterasys X-Pedition XSR CLI - page 76

    T1/E1 & T3/E3 Commands 2-70 Configuring T1/E1 and T3/E3 Subsystems Synt ax linecode { ami | b8zs | hdb3 } Synt ax of the “no” Form Return  to  the  defaul t  linecode  setting  by  using  the  no  form: no linecode Default s •T 1  line:  B8ZS •E 1  line:  HDB3 Mode Controller  configuration: ...

  • Enterasys X-Pedition XSR CLI - page 77

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-71 Synt ax of the “no” Form no loopback Default Disabled Mode Controller  configuration:  XSR(config-controller < xx >)# Examples The  following  example  init iates  a  local  loopback  test: XSR(config)#controller t1 1/0 XSR(config-controller<T1-1/0>)# ...

  • Enterasys X-Pedition XSR CLI - page 78

    T1/E1 & T3/E3 Commands 2-72 Configuring T1/E1 and T3/E3 Subsystems Mode Controller  configuration:  XSR(config-controller xx )# Default 1 Example The  following  example  configures  the  E3  controller  in  slot  1 ,  card  2  with  line  sou rce  clocking  and  a  national  reserv ...

  • Enterasys X-Pedition XSR CLI - page 79

    T1/E1 & T3/E3 Commands XSR CLI Reference Guide 2-73 Example The  following  example  configures  the  T3  controller  in  slot  1 ,  car d  2  with  line  source  clocking,  M13  framing,  in  unchannelized  mode,  cablelength  of  250 ,  DSU  interoperability  mode ? ...

  • Enterasys X-Pedition XSR CLI - page 80

    T1/E1 and T3/E3 Clear and Show Commands 2-74 Configuring T1/E1 and T3/E3 Subsystems Examples The  following  example  disables  a  T1  controller: XSR(config)#controller t1 1/0 XSR(config-controller<T1-1/0>)#shutd own The  following  example  re ‐ ena bles  a  T3  controller: XSR(config)#controller t3 1/2 ...

  • Enterasys X-Pedition XSR CLI - page 81

    T1/E1 and T3/E3 Clear and Show Commands XSR CLI Reference Guide 2-75 show controllers This  command  displays  the  status  and  statistics  for  any  controller .  The  T1/E1,  T3/E3,  and  AT M  subsystems  track  var i o u s  status  and  statist ical  parameters,  including  t ...

  • Enterasys X-Pedition XSR CLI - page 82

    T1/E1 and T3/E3 Clear and Show Commands 2-76 Configuring T1/E1 and T3/E3 Subsystems 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 Rx ABCD * * * * * * F F 0 * F F F F F F F F F F F F F F Channel 1: Timeslots 1,2,3,4,5,6,7,8,9, 10 64kbps Base rate Channel 2: Timeslots 12,13 56kbps Base rate Data in current interval (502 second s elapsed): 0 Line Co ...

  • Enterasys X-Pedition XSR CLI - page 83

    T1/E1 and T3/E3 Clear and Show Commands XSR CLI Reference Guide 2-77 Latest II I II IV No Code No Code No Code No Code Alarms Detected: LOS LOF TxAIS RxAIS TxRA I RxRAI LOOP PayLd X X X 24 Hour Statistics cleared: MAY 04 2 2:33:47 Current time: MAY 04 22:34:13 Interval LVC PCV CCV PES PSES SE FS UAS LES CES CSES Total 4352 0 0 2 2 2 2 2 2 2 Current ...

  • Enterasys X-Pedition XSR CLI - page 84

    T1/E1 and T3/E3 Clear and Show Commands 2-78 Configuring T1/E1 and T3/E3 Subsystems Rx  ABCD  *  *  *  *  *  *  F  F  0  *  F  F  F  F  F  F  F  F  F  F  F  F  F  F Time  slot  that  bypasses  between  port  0  and  1  carry  Channel  Associa ...

  • Enterasys X-Pedition XSR CLI - page 85

    T1/E1 and T3/E3 Clear and Show Commands XSR CLI Reference Guide 2-79 FE AC  code  rece iv e d  Displays  the  last  4  FEAC  codes  or  commands  that  wer e  received.  Applicable  for  C ‐ bit  parity  framing  only ,  per  ANSI  T1.105 ‐ 1995.  This  field  are  in ...

  • Enterasys X-Pedition XSR CLI - page 86

    Drop and Insert Commands 2-80 Configuring T1/E1 and T3/E3 Subsystems Drop and Insert Commands These  commands  effect  the  operation  of  the  T1/E1  Drop  and  Insert  NI M. drop-and-insert-group This  command,  which  takes  no  parameters,  instructs  the  T1  controller  to  off ...

  • Enterasys X-Pedition XSR CLI - page 87

    Drop and Insert Commands XSR CLI Reference Guide 2-81 Mode Controller  configuration:  XSR(config-controller < xx >)# Default cas Example This  configuration  instructs  the  XSR  to  terminate  timeslots  1,  2,  3,  4,  5,  6  and  7  of  controller  T1  0/1/ 0  into  a ? ...

  • Enterasys X-Pedition XSR CLI - page 88

    Drop and Insert Commands 2-82 Configuring T1/E1 and T3/E3 Subsystems Applique type is Fractional T1. Loopback is set as none. Cablelength long and short 0. Framing is esf, Line Encoding is b8z s, Clock Source is line. Description: None Alarms Detected: None Rx 0signal level -0.0DB (Accuracy:+/-3DB) Bypass time slots table ( * data tim e slots on s/ ...

  • Enterasys X-Pedition XSR CLI - page 89

    XSR CLI Reference Guide 3-83 3 Configuring the XSR Plat form Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  in  the  following  table. Plat form Commands The  following  sets  of  commands  define  the  platform  subsystem ? ...

  • Enterasys X-Pedition XSR CLI - page 90

    Clock Commands 3-84 Configuring the XSR Platform Clock Commands clock set This  command  sets  the  current  time  of  the  Real  Time  Clock  chip  (software  module  clock).  After  resetting  the  XSR,  you  must  manually  set  the  clock. Synt ax clock set hh:mm:ss wday md ...

  • Enterasys X-Pedition XSR CLI - page 91

    Crypto Key Commands XSR CLI Reference Guide 3-85 Crypto Key Commands crypto key master generate This  command  generates  a  random  master  encryption  key .  When  the  command  is  entered,  you  are  prompted  to  identify  the  previous  master  key .  If  yo u  success fu ...

  • Enterasys X-Pedition XSR CLI - page 92

    Other Platform Commands 3-86 Configuring the XSR Platform crypto key master specify This  command  allows  you  to  speci fy  a  master  encryption  key .  When  entered ,  the  command  first  prompts  you  to  identify  the  pr evious  ma ster  key .  If  you  cannot  i ...

  • Enterasys X-Pedition XSR CLI - page 93

    Other Platform Commands XSR CLI Reference Guide 3-87 Example XSR(config)#cpu-utilization debug processor This  command  defines  a  method  to  force  forw arding  engine  jobs  to  a  specific  CPU  or  allows  the  jobs  to  float  between  av ailable  CPUs. Synt ax debug processor ...

  • Enterasys X-Pedition XSR CLI - page 94

    Other Platform Commands 3-88 Configuring the XSR Platform Example XSR#hostname XSR-1800 XSR-1800# logging This  command  enables/disables  message  logging  at  va r y i n g  severity  leve ls  for  specified  destinations.  Refer  to  Appendix  A  in  the  XSR  User ’s  Guide  for ? ...

  • Enterasys X-Pedition XSR CLI - page 95

    Other Platform Commands XSR CLI Reference Guide 3-89 Synt ax of the “no” Form Use  the  no  form  of  this  command  to  di sable  the  earlier  configured  se rvice: no logging [console | buffered | mon itor | snmp | A.B.C.D | file | ti mestamp] Mode Global  Configuration:  XSR(config)# Default s •F ...

  • Enterasys X-Pedition XSR CLI - page 96

    Other Platform Commands 3-90 Configuring the XSR Platform Examples This  example  sets  logging  at  High  for  the  console  wi th  a  local  ti mestamp: XSR#logging console high timestamp l ocal The  following  example  sets  a  Low  logging  level  for  all  destinations  with ...

  • Enterasys X-Pedition XSR CLI - page 97

    SNTP Commands XSR CLI Reference Guide 3-91 Mode Global  configuration:  XSR(config)# Examples The  following  example  selects  a  5 ‐ minute  auto  inst all: XSR(config)#netload The  following  example  selects  a  persistent  auto  inst all: XSR(config)#netload persistent SNTP Commands sntp-client ...

  • Enterasys X-Pedition XSR CLI - page 98

    SNTP Commands 3-92 Configuring the XSR Platform sntp-client poll-interval This  command  configures  the  interval  th e  SNTP  client  wa i ts ,  when  synchronized,  before  sending  another  time  request  to  an  SNTP  serv er .  The  poll ‐ interval  is  applied  continu ...

  • Enterasys X-Pedition XSR CLI - page 99

    SNTP Commands XSR CLI Reference Guide 3-93 no sntp-server This  command  disables  the  SNTP  server . Synt ax no sntp-server Mode Global  configuration:  XSR(config)# show sntp This  command  displays  the  current  status  of  the  SNTP  server . Synt ax show sntp Output XSR>show sntp SNTP server ...

  • Enterasys X-Pedition XSR CLI - page 100

    Platform Clear and Show Commands 3-94 Configuring the XSR Platform Nominal  freq  is  xxxxx  Hz ,  actual  freq  is  xxxx  Hz,  precision  is  2**16 Reference  time  is  12345678.12345678  (01:01:01 .123  EDT  Mon  Jan  1  2004) Clock  offset  is  1.1234  msec,  root  ...

  • Enterasys X-Pedition XSR CLI - page 101

    Platform Clear and Show Commands XSR CLI Reference Guide 3-95 clear logging This  command  deletes  all  messages  from  the  logging  buffer  in  RAM. Synt ax clear logging Mode Privileged  EXEC:  XSR# Example XSR#clear logging show buffers This  command  displays  platform  memory  statistics  ...

  • Enterasys X-Pedition XSR CLI - page 102

    Platform Clear and Show Commands 3-96 Configuring the XSR Platform Memory Block Allocation: Memory Options enabled: None. ------------------------------------ --------------------------------- Size Number Number Avg.S ize Max.Size Number of Size Carved Carved In Use In Use Request Requests Upgrade ------------------------------------ -------------- ...

  • Enterasys X-Pedition XSR CLI - page 103

    Platform Clear and Show Commands XSR CLI Reference Guide 3-97 show buffers i/o This  command  displays  summary  I/O  (data  buffers,  frame  elements)  memory  usage  statistics.  Allocations  are  based  on  the  hardwa re  present  in  the  XSR. Synt ax show buffers i/o Mode Privileg ...

  • Enterasys X-Pedition XSR CLI - page 104

    Platform Clear and Show Commands 3-98 Configuring the XSR Platform Parameter Descriptions show buffers malloc This  command  displays  summary  Malloc  (tables,  configuration  structure)  area  memory  statistics.  Synt ax show buffers malloc Mode Privileged  EXEC  configuration:  XSR# Common  Buffer ? ...

  • Enterasys X-Pedition XSR CLI - page 105

    Platform Clear and Show Commands XSR CLI Reference Guide 3-99 Sample Output Memory Block Allocation: Memory Options enabled: None. ------------------------------------ ------------------------------ Size Number Number Avg.Size Max.Size Number of Size Carved Carved In Use In Use Request Requests Upgrade ------------------------------------ --------- ...

  • Enterasys X-Pedition XSR CLI - page 106

    Platform Clear and Show Commands 3-100 Configuring the XSR Platform show cpu-utilization This  command  tracks  current  use  of  va r i o us  CPU  processes  as  a  percentage  of  tota l  CPU  usage  for  the  last  five  second,  one  minute,  and  fiv e ‐ minute  inter ...

  • Enterasys X-Pedition XSR CLI - page 107

    Platform Clear and Show Commands XSR CLI Reference Guide 3-101 show fault-report This  command  displays  the  fault  report  captured  when  the  XSR  experiences  a  system  problem.  It  contains  information  that  pinpoints  the  cause  of  the  software  fai lure.  Thi ...

  • Enterasys X-Pedition XSR CLI - page 108

    Platform Clear and Show Commands 3-102 Configuring the XSR Platform Sample Output The  following  is  sample  output  from  an  XSR ‐ 3020  router: Fault Report captured in node Router Name on Sept 22, 2001 at 3:30:5 9pm Fault: Data TLB Miss Processor up-time = 1234 hours 59 mi nutes 59 seconds Processor = PowerPC 405 GP E ...

  • Enterasys X-Pedition XSR CLI - page 109

    Platform Clear and Show Commands XSR CLI Reference Guide 3-103 004276be 12345678 12345678 12345678 12345678 12345678 12345678 12345 678 004276ce 12345678 12345678 12345678 12345678 12345678 12345678 12345 678 004276de 12345678 12345678 12345678 12345678 12345678 12345678 12345 678 etc. for all tasks End of fault report. When  the  XSR  is ...

  • Enterasys X-Pedition XSR CLI - page 110

    Platform Clear and Show Commands 3-104 Configuring the XSR Platform Synt ax show logging Mode EXEC  or  Privileged  EXEC:  XSR> or XSR# Example XSR>show logging file Sample Output The  following  example  displays  the  logging  file  information: XSR#show logging file History of logging to file cflash:lo ggen ...

  • Enterasys X-Pedition XSR CLI - page 111

    Platform Clear and Show Commands XSR CLI Reference Guide 3-105 Mode Privileged  EXEC:  XSR# Sample Output XSR#show sntp Server IP:192.168.27.88 Poll Interval: 512 Sntp Requested: 1 Last Synced: 17:00:34-UTC-Sunday,26- JAN-2003 Current Time: 10:53:01-UTC-Monday,27 -JAN-2003 show version This  command  displays  current  XSR  har ...

  • Enterasys X-Pedition XSR CLI - page 112

    Platform Clear and Show Commands 3-106 Configuring the XSR Platform Software: Version 5.5.1.3, Built May 16 20 03, 14:31:56 CLI revision 1.5 Software file is “xsr1800.fls” w ith VPN; with Firewall XSR-1800 uptime is 33 days, 10 h ours, 44 minutes. The  following  example  displays  output  from  an  XSR ‐ 3150: XSR#show v ...

  • Enterasys X-Pedition XSR CLI - page 113

    File System Commands XSR CLI Reference Guide 3-107 Example XSR#show whoami Sample Output XSR#show whoami Comm Server “Enterasys”, current lin e at 9600bps. File System Commands The  XSR  employs  an  MS ‐ DOS ‐ compatible  file  system  in  Flash  memory .  The  following  commands  are  av ailable. ...

  • Enterasys X-Pedition XSR CLI - page 114

    File System Commands 3-108 Configuring the XSR Platform XSR(config)#rename VPN_XSR1800.fls x sr1800.fls Rename flash:VPN_xsr1800.fls to flas h:xsr1800.fls(y/n) ? y renaming file flash:VPN_xsr1800.fls -> flash:xsr1800.fls XSR# The  following  example  renames  the  firmw are  file  as  part  of  an  F TP/TF TP  ...

  • Enterasys X-Pedition XSR CLI - page 115

    File System Commands XSR CLI Reference Guide 3-109 XSR#copy running-config startup-conf ig . Mode Privileged  EXEC:  XSR# Examples XSR#copy tftp://192.168.27.1/root/en terasys-sw flash: Save Configuration to TFTP Server Save  the startup-config  fi le  on  a  TF TP  serv er  over  the  netw ork.  Enter: XSR#copy ...

  • Enterasys X-Pedition XSR CLI - page 116

    File System Commands 3-110 Configuring the XSR Platform Configuration Load This  example  loads  startu p ‐ config  via  the  netw ork  from  a  TF TP  server .  The  XSR  does  not  load  the  configuration  from  the  netw ork  automat ically . XSR#copy tftp:TFTP1/tftpfiles/tftpim a ...

  • Enterasys X-Pedition XSR CLI - page 117

    File System Commands XSR CLI Reference Guide 3-111 Mode Privileged  EXEC:  XSR# Example XSR#copy startup-config tftp://192.1 68.1.100/cfg.txt Sample Output XSR#copy startup-config tftp://192.1 68.1.100/abc.cfg Copy 'startup-config' from Flash to server as 'abc.cfg'(y/n) ? y Upload to server done File size: 2997 bytes delet ...

  • Enterasys X-Pedition XSR CLI - page 118

    File System Commands 3-112 Configuring the XSR Platform Mode Privileged  EXEC:  XSR# Default flash: unless  you  change  the  default  using  the  cd  command. Example XSR#dir flash: Sample Output The  following  is  sample  output  from  an  XSR  1800  Series  router: XSR#dir flash: Listi ...

  • Enterasys X-Pedition XSR CLI - page 119

    File System Commands XSR CLI Reference Guide 3-113 Default •F o r m a t :  ASCII •D i r e c t o r y :  current  directory Examples XSR#more /ascii flash:startup-config XSR#more flash:startup-config Sample Output In  ASCII  format  ( /ascii ): Controller t1 1/0 Clock source line primary Framing esf In  Binary  format  ...

  • Enterasys X-Pedition XSR CLI - page 120

    File System Commands 3-114 Configuring the XSR Platform which  is  specified  in  the  flash:boot ‐ config  file.  Although  you  cannot  configure  the  secondary  EOS  file,  if  you  wish  to  rename  it,  use  the  boot system command.  Be  aw are  that  if  t ...

  • Enterasys X-Pedition XSR CLI - page 121

    File System Commands XSR CLI Reference Guide 3-115 Examples The  following  example  immediately  cold  restarts  the  XSR: XSR#reload cold The  following  example  warm  upgrades  the  new  image  from  the  primary  OS  file  in  the  flash:  directory  and  tests  it ? ...

  • Enterasys X-Pedition XSR CLI - page 122

    File System Commands 3-116 Configuring the XSR Platform Example XSR#rename cflash:xsr3000.fls.5512 flash:xsr3000.fls show hostname This  command  displays  the  name  you  specified  for  the  XSR. Synt ax show hostname Mode EXEC:  XSR> Example XSR#show hostname Sample Output XSR#show hostname Local hostname is XSR ...

  • Enterasys X-Pedition XSR CLI - page 123

    File System Commands XSR CLI Reference Guide 3-117 XSR#show reload No reload is scheduled No EOS fallback Parameter Description show running-config This  command  displays  the  router ’ s  running  configuration  as  a  sequence  of  CLI  commands  segmented  by  module.  The  XSR  gathers ? ...

  • Enterasys X-Pedition XSR CLI - page 124

    File System Commands 3-118 Configuring the XSR Platform session-timeout console 35000 session-timeout telnet 35000 session-timeout ssh 35000 !T1E1 controller t1 0/2/0 clock source internal no shutdown !IKE crypto isakmp proposal try1 authentication pre-share encryption aes hash md5 group 5 lifetime 40000 crypto isakmp peer 2.2.2.2 255.255.2 55.255 ...

  • Enterasys X-Pedition XSR CLI - page 125

    File System Commands XSR CLI Reference Guide 3-119 !OSPF router ospf 1 network 30.1.1.0 0.0.0.255 area 0.0. 0.0 network 20.1.1.0 0.0.0.255 area 0.0. 0.0 !RIP router rip !SNMP snmp-server community public rw snmp-server enable !AAA aaa group ii dns server primary 0.0.0.0 dns server secondary 0.0.0.0 wins server primary 0.0.0.0 wins server secondary ...

  • Enterasys X-Pedition XSR CLI - page 126

    File System Commands 3-120 Configuring the XSR Platform verify This  command  veri fi es  a  packed  softw are  image  file.  The  file  name  must  end  in  *.fls .  If  the  directory  name  is  not  specified,  the  current  directory  is  used. Synt ax XSR#verify [fla ...

  • Enterasys X-Pedition XSR CLI - page 127

    Bootrom Monitor Mode Commands XSR CLI Reference Guide 3-121 Bootrom Monitor Mode Commands Bootrom  monitor  mode  offers  special  user  access  for  Flash:/CompactFlash:  file  operations  and  on  occasions  when  the  XSR  lacks  va l i d  software  or  runs  abnormally .  Ente ...

  • Enterasys X-Pedition XSR CLI - page 128

    Bootrom Monitor Mode Commands 3-122 Configuring the XSR Platform If  the  Bootrom  password  is  lost  on  the  XSR  1800  Series,  you  can  restore  it  by  pressing  the  Default  button.  Be  aw are  that  when  pressed,  the  Default  button  erases  all  ...

  • Enterasys X-Pedition XSR CLI - page 129

    Bootrom Monitor Mode Commands XSR CLI Reference Guide 3-123 da This  command  displays  system  date  and  time  with  this  sample  output: XSR-1800: da Date: Thursday, 29-MAY-2003. Time: 10:14:07 del This  command  removes  a  fi le  from  flash:  or  cflash:  memory . df This  command ? ...

  • Enterasys X-Pedition XSR CLI - page 130

    Bootrom Monitor Mode Commands 3-124 Configuring the XSR Platform dt This  command  sets  system  time  using  th e  syntax  hh mm ss .  For  example: XSR:dt 11 59 59 ff This  command  formats  the  Flash  file  system.  We  recommend  you  fi rst  save  any .dat , .ce rt , .cfg ,  ...

  • Enterasys X-Pedition XSR CLI - page 131

    Bootrom Monitor Mode Commands XSR CLI Reference Guide 3-125 Remote Host IP address (192.168.1.10 ) : Remote file path (c:) : Use TFTP (no) : Ftp userid (anonymous) : Ftp password () : Local target name (robo1) : Autoboot (yes) : Quick boot (no) : Permanently save the network paramet ers? (y/n) ns This  command  saves  a  file  over ...

  • Enterasys X-Pedition XSR CLI - page 132

    Bootrom Monitor Mode Commands 3-126 Configuring the XSR Platform gp= 8219b1e0 sp= 85febb90 s8= 00000000 ra= 82 0e9178 par1= ffffffff par2= 85febaf8 par3= ffffffff par4= 82 0e9b10 cause= 80000014 cntxt= ffffffff fpcsr= d3800000 badva= 08 112233 divLo= 00000000 divHi= 00000000 causeR= ffffffff fpcsr= 82 0e9170 BadVAddr=08112233 PP - Crashed Task Stac ...

  • Enterasys X-Pedition XSR CLI - page 133

    Bootrom Monitor Mode Commands XSR CLI Reference Guide 3-127 RAM: 512MB without interleave Memory Bus at 120MHz, CASL at 2.0 Bootrom Flash: 4MB Filesystem Flash: 8MB CompactFlash not present Real Time Clock I/O on Motherboard: GigabitEthernet 1 2 3 Encryption Hardware: not present Slot 0 card 1: Empty Slot 0 card 2: Empty System up for 9 days, 3 hou ...

  • Enterasys X-Pedition XSR CLI - page 134

    Bootrom Monitor Mode Commands 3-128 Configuring the XSR Platform ...

  • Enterasys X-Pedition XSR CLI - page 135

    XSR CLI Reference Guide 4-83 4 Configuring Hardware Controllers Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  in  the  following  table. Hardware Controller Commands The  following  command  sets  allow  you  to  define  sy ...

  • Enterasys X-Pedition XSR CLI - page 136

    Hardware Controller Comman ds 4-84 Configuring Hardware Controllers Synt ax clock rate bps Synt ax of the “no” Form no clock rate Mode Interface  configuration:  XSR(config-if<S x >)# Default 9600 Example XSR(config-if<S1/0>)#clock rate 1920 0 dat abit s This  command  sets  the  number  of  data  bits  ...

  • Enterasys X-Pedition XSR CLI - page 137

    Hardware Controller Commands XSR CLI Reference Guide 4-85 description This  command  sets  the  description  text  for  an  interface.  The  description  wil l  appear  in  the  ifDescription  (interface  description)  var i a bl e  of  the  MIB. Synt ax description < text > Mode ...

  • Enterasys X-Pedition XSR CLI - page 138

    Hardware Controller Comman ds 4-86 Configuring Hardware Controllers Synt ax of the “no” Form no duplex Default auto Mode Interface  configuration:  XSR(config-if<F x >)# Example XSR(config-if<F1/0>)#duplex full XSR(config-if<F1/0>)#speed 100 loopback This  command  forces  the  port  into  internal  ...

  • Enterasys X-Pedition XSR CLI - page 139

    Hardware Controller Commands XSR CLI Reference Guide 4-87 media-type This  command  sets  the  media ‐ type  appropriate  to  the  cable  type  that  the  interface  is  connected  to. Synt ax media-type {RS232 | RS422 | RS449 | RS530A | V35 | X21} Mode Interface  configuration:  XSR(config-if< ...

  • Enterasys X-Pedition XSR CLI - page 140

    Hardware Controller Comman ds 4-88 Configuring Hardware Controllers pa r i t y This  command  configur es  th e  parity  on  a  serial  inter face.  It  is  val i d  and  ta kes  effect  only  when  the  interface  is  in  Asynchronous  mode. Synt ax parity { even | mark | none | odd ...

  • Enterasys X-Pedition XSR CLI - page 141

    Hardware Controller Commands XSR CLI Reference Guide 4-89 Mode Interface  configuration:  XSR(config-if<Sx>)# Default Sync Example XSR(config-if<S1/0>)#physical-layer async shut down This  command  disables  an  interface.  When  th e  interface  is  created,  it  is  disabl ed  by  defaul ...

  • Enterasys X-Pedition XSR CLI - page 142

    Hardware Controller Comman ds 4-90 Configuring Hardware Controllers • Speed  cannot  be  changed  in  loopback  mode. •W h e n  connecting  an  auto  setting  on  an  XSR  to  a  forced  setting  on  another  router ,  the  forced  setting  must  be  set  to  ha ...

  • Enterasys X-Pedition XSR CLI - page 143

    Hardware Controller Commands XSR CLI Reference Guide 4-91 Mode Interface  configuration:  XSR(config-if<S x >)# Default 1 Example The  following  example  sets  2  stopbits  on  Serial  port  1/0 : XSR(config-if<S1/0>)#stopbits 2 vlan This  command  configures  a  Vi rt u a l  LAN  (VLA ...

  • Enterasys X-Pedition XSR CLI - page 144

    Hardware Controller Clear and Show Commands 4-92 Configuring Hardware Controllers Hardware Controller Clear and Show Commands clear counters fastethernet This  command  clears  MIB ‐ II  counters  for  the  FastEther net  interface.  The  counters  cleared  include: •i f I n O c t e t s •i f I n U c a s t P ...

  • Enterasys X-Pedition XSR CLI - page 145

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-93 Mode Privileged  EXEC:  XSR# Example The  following  example  clears  the  MIB ‐ II  counters  on  GigabitEthernet  port  3 ,  sub ‐ interface  2 : XSR#clear counters gigabitethernet 3 .2 clear interface fastethernet This  comma ...

  • Enterasys X-Pedition XSR CLI - page 146

    Hardware Controller Clear and Show Commands 4-94 Configuring Hardware Controllers Example The  following  example  resets  GigabitEthernet  port  1 ,  sub ‐ interface  5 : XSR#clear counters gigabitethernet 1 .5 clear counters serial This  command  clears  serial  interface  counters.  The  counters ? ...

  • Enterasys X-Pedition XSR CLI - page 147

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-95 Synt ax clear interface serial [ card / port ] Mode Privileged  EXEC:  XSR# Example XSR#clear interface serial 1/0 show controllers fastethernet This  command  displays  detailed  FastEthernet  controller  data  for  a  port.  This  inter ...

  • Enterasys X-Pedition XSR CLI - page 148

    Hardware Controller Clear and Show Commands 4-96 Configuring Hardware Controllers dataLen 0x00000000, status 0 x00001300, buffer 0x00000000 dataLen 0x00000000, status 0 x00001300, buffer 0x00000000 dataLen 0x00000000, status 0 x00001300, buffer 0x00000000 dataLen 0x00000000, status 0 x00001300, buffer 0x00000000 [...] RX RING ENTRIES: The ring star ...

  • Enterasys X-Pedition XSR CLI - page 149

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-97 datalen 0x00000000, status 0 x00000000, buffer 0x80000000 datalen 0x00000000, status 0 x00000000, buffer 0x80000000 datalen 0x00000000, status 0 x00000000, buffer 0x80000000 datalen 0x00000000, status 0 x00000000, buffer 0x80000000 datalen 0x00000000, status 0 x00000000, buffe ...

  • Enterasys X-Pedition XSR CLI - page 150

    Hardware Controller Clear and Show Commands 4-98 Configuring Hardware Controllers Packet Processor Tx Scheduler Stats: 0 Packet driver Tx OK 0 Packet driver not Tx: MUX END_ERR_BLOCK 0 Packet driver not Tx: MUX ERROR 0 Packet driver not Tx: Unkn own Msg from MUX The unit number is 50331656. The interrupt number is 26. The DSR poll count is 800 ms. ...

  • Enterasys X-Pedition XSR CLI - page 151

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-99 Mode Privileged  EXEC  or  Global  configuration:  XSR# or  XSR(config)# Sample Output The  following  example  displays  output  by  the  command: XSR(config)#show interface bri 1/0 ********** Serial Interface Stats ********** D-Serial 1 ...

  • Enterasys X-Pedition XSR CLI - page 152

    Hardware Controller Clear and Show Commands 4-100 Configuring Hardware Contr ollers show interface dialer This  command  displays  information  about  th e  Dialer  interf ace. Synt ax show interface dialer [ number ] Mode Privileged  EXEC  or  Global  configuration:  XSR# or  XSR(config)# Sample Output The ? ...

  • Enterasys X-Pedition XSR CLI - page 153

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-101 Internet address is 54.54.54.1, subn et mask is 255.255.255.0 Secondar y Internet address is 57.57.57.1, subn et mask is 255.255.255.0 Secondar y Internet address is 58.58.58.1, subn et mask is 255.255.255.0 Secondar y The name of this device is Eth1. The physical link is cur ...

  • Enterasys X-Pedition XSR CLI - page 154

    Hardware Controller Clear and Show Commands 4-102 Configuring Hardware Contr ollers The Name of the Access Concentrator is c3600-1 The Session Id is 0x0005 The MAC Address of the Access Concen trator is 0x00:30:85:20:47:62 The MTU is 1492 Other Interface Statistics: ifOperStatus 1 ifInOctets 119439 ifOutOctets 119256 Configured VLANs: VLAN Id 1400 ...

  • Enterasys X-Pedition XSR CLI - page 155

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-103 ifLastChange 00:00:0 0 ifInOctets 0 ifInUcastPkts 0 ifInNUcastPkts 0 ifInDiscards 0 ifInErrors 0 ifInUnknownProtos 0 ifOutOctets 0 ifOutUcastPkts 0 ifOutNUcastPkts 0 ifOutDiscards 0 ifOutErrors 0 ifOutQLen 256 show interface loopback This  command  displays  informat ...

  • Enterasys X-Pedition XSR CLI - page 156

    Hardware Controller Clear and Show Commands 4-104 Configuring Hardware Contr ollers XSR#show interface multilink 8 ********** Multilink Interface Stats ********** Multilink 8 is Admin Down Internet address is not assigned LCP State: CLOSED Multilink State: CLOSED Max Fragment delay is 10 ms MLPPP Bundle Info: Control Object state is Admin Down / Op ...

  • Enterasys X-Pedition XSR CLI - page 157

    Hardware Controller Clear and Show Commands XSR CLI Reference Guide 4-105 Sent: 0 octets, 0 unicast packets, 0 discards, 0 errors. MTU is 1500 bytes. Proxy ARP is enabled. Helper address is not set. Directed broadcast is enabled. Outgoing access list is not set. Inbound access list is not set. IP Policy Based Routing is not enabl ed. The  follow ...

  • Enterasys X-Pedition XSR CLI - page 158

    Hardware Controller Clear and Show Commands 4-106 Configuring Hardware Contr ollers ifindex 0 ifType 22 ifAdminStatus 1 ifOperStatus 1 ifLastChange 00:00:2 5 ifInOctets 1500 ifInUcastPkts 100 ifInNUcastPkts 0 ifInDiscards 0 ifInErrors 0 ifInUnknownProtos 0 ifOutOctets 2134 ifOutUcastPkts 14 ifOutNUcastPkts 0 ifOutDiscards 0 ifOutErrors 0 ifOutQLen ...

  • Enterasys X-Pedition XSR CLI - page 159

    XSR CLI Reference Guide 5-83 5 Configuring the Internet Protocol Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  below . IP Commands The  following  command  sets  define  IP  functionality  on  the  XSR  including: • “OSPF  Comman ...

  • Enterasys X-Pedition XSR CLI - page 160

    OSPF Commands 5-84 Configuring the Internet Protocol • “VRRP  Clear  and  Show  Commands”  on  page 5 ‐ 197. OSPF Commands area authentication This  command  enables/disables  authenticati on  for  an  OSPF  area. Synt ax area area-id authentication [ message -digest ] Synt ax of the “no” Form The ...

  • Enterasys X-Pedition XSR CLI - page 161

    OSPF Commands XSR CLI Reference Guide 5-85 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  cost  va l u e  from  the  summary  route  that  is  sent  by  default  in to  the  stub  area  identified  by  the  ar ea ‐ id : no area area-id defa ...

  • Enterasys X-Pedition XSR CLI - page 162

    OSPF Commands 5-86 Configuring the Internet Protocol Default No  NSSA  defined Example The  following  example  configures  area  10  as  a  NSSA  area: XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip address 172.16 .10.5 255.255.255.252 XSR(config)#router ospf 1 XSR(config-router)#network 172.16.10 ...

  • Enterasys X-Pedition XSR CLI - page 163

    OSPF Commands XSR CLI Reference Guide 5-87 Mode Router  configuration:  XSR(config-router)# Examples This  example  sets  the  address  range  used  by  this  router  for  summarized  routes  learned  at  the  boundary  of  area  0.0.0.0 ,  as  172.16.0.0/16 : XSR(config)#interfac ...

  • Enterasys X-Pedition XSR CLI - page 164

    OSPF Commands 5-88 Configuring the Internet Protocol XSR(config)#router ospf XSR(config)#network 172.16.152.0 0.0 .0.0 area 10 XSR(config)#area 10 stub area virtual-link This  command  defines  an  OSPF  virtual  link,  which  represents  a  logical  connection  betw een  the  backbone  and  a  non ...

  • Enterasys X-Pedition XSR CLI - page 165

    OSPF Commands XSR CLI Reference Guide 5-89 The  no  form  of  this  command  removes  the  virtual  li nk : no area area-id virtual-link router-id [ authenticati on [ message-digest | null ]] [ hello - interval seconds ] [ retransmit -interval seconds ] [ transmit-delay second s ] [ dead-interval seconds ] [ authenticat i ...

  • Enterasys X-Pedition XSR CLI - page 166

    OSPF Commands 5-90 Configuring the Internet Protocol Figure 5-1 Area V irtual Link Example auto-virtual-link This  command  automatically  creates  virtual  links .  Refer  to  the  area-virtual-link  command  for  more  related  information. Synt ax auto-virtual-link Synt ax This  command’ s  no ? ...

  • Enterasys X-Pedition XSR CLI - page 167

    OSPF Commands XSR CLI Reference Guide 5-91 Default s •L i m i t : ‐ 1 •E x i t  External  Interv al:  0 • W arning  Level:  0 Mode OSPF  Router  configuration:  XSR(config-router)# Examples The  following  example  configures  param eters  for  Ty p e  5  external  LSA  database  o ...

  • Enterasys X-Pedition XSR CLI - page 168

    OSPF Commands 5-92 Configuring the Internet Protocol Synt ax distance ospf { intra | inter | ext } weight Synt ax of the “no” Form The  no  command  resets  the  administrative  distance  to  the  default  va l u e  for  the  particular  type  of  routes.  If  no  type  of  routes ? ...

  • Enterasys X-Pedition XSR CLI - page 169

    OSPF Commands XSR CLI Reference Guide 5-93 Example This  example  sets  the  administrativ e  distance  for  OSPF  external  routes  to  65 .  Note  that  you  can  do  so  only  if  both  intra  and  inter  OSPF  distances  are  less  than  65,  otherwise  ...

  • Enterasys X-Pedition XSR CLI - page 170

    OSPF Commands 5-94 Configuring the Internet Protocol ip osp f cost This  command  sets  the  cost  of  sending  a  pack et  on  a  interface.  Each  router  interface  that  participates  in  OSPF  routing  is  assigned  a  def ault  cost.  Thi s  command  ov erwrites ...

  • Enterasys X-Pedition XSR CLI - page 171

    OSPF Commands XSR CLI Reference Guide 5-95 Default Four  times  the  val u e  of  the  seconds  parameter  defined  in  the  ospf hello-interval  command. Example The  following  example  sets  the  dead  interv al  to  20  for  FastEthernet  port  2: XSR(config)#interface fast ...

  • Enterasys X-Pedition XSR CLI - page 172

    OSPF Commands 5-96 Configuring the Internet Protocol ip osp f message-digest-key This  command  enables/disables  OSPF  MD5  authentication  on  an  interface  to  val i d a t e  OSPF  routing  updates  between  neighboring  routers. Synt ax ip ospf message-digest-key keyid md5 key Synt ax of the “n ...

  • Enterasys X-Pedition XSR CLI - page 173

    OSPF Commands XSR CLI Reference Guide 5-97 Mode Interface  configuration:  XSR(config-if< xx ># Example The  following  example  imposes  OSPF  passive  on  Fast  Ethernet  interface  1: XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip ospf passive ip osp f poll-interval This  command  ...

  • Enterasys X-Pedition XSR CLI - page 174

    OSPF Commands 5-98 Configuring the Internet Protocol Mode Interface  configuration:  XSR(config-if< xx >)# Default 1 Example The  following  example  sets  OSPF  priority  to  20  for  FastEthernet  port  1: XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip address 172.16 .16.1 255.255.255 ...

  • Enterasys X-Pedition XSR CLI - page 175

    OSPF Commands XSR CLI Reference Guide 5-99 ip osp f transmit-delay This  command  sets  the  interv al  required  to  trans mit  a  link  state  update  packet  on  this  interface. Synt ax ip ospf transmit-delay seconds Synt ax of the “no” Form The  no  form  of  this  command  set ...

  • Enterasys X-Pedition XSR CLI - page 176

    OSPF Commands 5-100 Configuring the Internet Protocol Mode Router  configuration:  XSR(config-router)# Default s • Disabled •C o s t s :  LAN ‐ 10,  Serial ‐ 64 Example In  this  example ,  three  routers  are  configured  to  run  OSPF .  Router  R1  and  R3  are  interna ...

  • Enterasys X-Pedition XSR CLI - page 177

    OSPF Commands XSR CLI Reference Guide 5-101 Synt ax of the “no” Form The  no  form  of  this  command  cancels  the  redistribution  of  routes: no redistribute from_protocol [ metric metric value ] Mode Router  configuration:  XSR(config-router)# Default Disabled Examples This  example  redistributes ? ...

  • Enterasys X-Pedition XSR CLI - page 178

    OSPF Commands 5-102 Configuring the Internet Protocol Next Mode Router  configuration:  XSR(config-router)# Default OSPF  disabled Example The  following  example  enables  OSPF  routing: XSR(config)#router ospf 2 XSR(config-router)# summary address This  command  summarizes  locally ‐ sourced  (Ty p e ‐ 5) ? ...

  • Enterasys X-Pedition XSR CLI - page 179

    OSPF Commands XSR CLI Reference Guide 5-103 Synt ax of the “no” Form The  no  form  of  this  command  removes  summary  addressing  on  the  XSR: no summary-address < ip-address >< ip-mask > Mode Router  configuration:  XSR(config-router)# Example The  following  example  produce  ...

  • Enterasys X-Pedition XSR CLI - page 180

    OSPF Debug and Show Commands 5-104 Configuring the Internet Protocol OSPF Debug and Show Commands debug ip osp f dr This  command  debugs  OSPF  des ignated  router  events.  As  wi th  al l  XSR  debug  command s,  it  is  set  to  privilege  leve l  15  by  default. Synt ax debug ip o ...

  • Enterasys X-Pedition XSR CLI - page 181

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-105 Synt ax of the “no” Form The  no  form  of  this  command  returns  the  debug  function  to  the  default: no debug ip ospf packet Mode EXEC  configuration:  XSR> Examples The  following  example  displays  a  transmitted  ...

  • Enterasys X-Pedition XSR CLI - page 182

    OSPF Debug and Show Commands 5-106 Configuring the Internet Protocol debug ip osp f lsas This  command  debugs  OSPF  Link  State  Advertisem ents  (LS As).  As  with  all  XSR  debug  commands,  it  is  set  to  privilege  lev el  15  by  default. Synt ax debug ip ospf lsas Synt ax ...

  • Enterasys X-Pedition XSR CLI - page 183

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-107 OSPF: Tx LSA. external, age:017a opt :20 id:13.0.0.0 rid:10.0.0.1 seq: 80000088 chk:807a l:36 from GigabitEthernet 2 The  following  example  displays  a  receiv ed  LSA  acknowledgement: OSPF: Rx Ack. external, nbr:10.0.0.1 age:017b opt:20 id:13.0.0.0 rid: 10.0.0.1 seq ...

  • Enterasys X-Pedition XSR CLI - page 184

    OSPF Debug and Show Commands 5-108 Configuring the Internet Protocol Synt ax debug ip ospf nbr Synt ax of the “no” Form The  no  form  of  this  command  returns  the  debug  function  to  the  default: no debug ip ospf nbr Mode EXEC  configuration:  XSR> Examples The  following  example  di ...

  • Enterasys X-Pedition XSR CLI - page 185

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-109 show ip osp f This  command,  when  any  debugging  type  is  enabled,  displays  output  about  the  following  types  of  OSPF  information:  designated  router  events,  neighbor  events,  Link  State  Adv ertisement ...

  • Enterasys X-Pedition XSR CLI - page 186

    OSPF Debug and Show Commands 5-110 Configuring the Internet Protocol show ip osp f border-routers This  command  displays  information  about  OSPF  internal  route  table  entries  to  ABRs  and  ASBRs. Synt ax show ip ospf border-routers Mode EXEC  or  Global  configuration: XSR> or XSR(config)# ...

  • Enterasys X-Pedition XSR CLI - page 187

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-111 show ip osp f dat abase This  command  displays  the  link  state  (LS)  database. Synt ax show ip ospf database show ip ospf database router [ link-s tate-id ] show ip ospf database network [ link- state-id ] show ip ospf database summary [ link- state-id ] show ip osp ...

  • Enterasys X-Pedition XSR CLI - page 188

    OSPF Debug and Show Commands 5-112 Configuring the Internet Protocol No Parameter XSR>show ip ospf database OSPF Router with ID(10.1.2.1) Displaying Net Link States (Area 0.0.0.0) LinkID ADV Router Age Seq# Checksum 10.1.1.1 10.0.0.1 0x1 0x80000001 0x61c610.5.6.1 10.1.2.1 0x0 0x80000001 0x927c Displaying Router Link States (Area 0.0.0.0) LinkID ...

  • Enterasys X-Pedition XSR CLI - page 189

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-113 (Link Data) Router Interface addr ess: 0.0.0.0 Number of TOS metrics: 0 TOS 0 Metrics: 64 Network Parameter XSR>show ip ospf database network OSPF Router with ID (192.168.44.2) Net Link States (Area 0.0.0.0) Routing Bit Set on this LSA LS age: 332 Options: (No TOS-capability, DC) LS Type ...

  • Enterasys X-Pedition XSR CLI - page 190

    OSPF Debug and Show Commands 5-114 Configuring the Internet Protocol Link State ID: 172.15.0.0 (summary N etwork Number) Advertising Router: 192.168.44.2 LS Seq. number: 80000006 Checksum: 0x5ACD Length: 28 Network Mask: /0 TOS: 0 Metric: 16777215 External Parameter Response XSR>show ip ospf database external OSPF Router with ID (192.168.44.2) T ...

  • Enterasys X-Pedition XSR CLI - page 191

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-115 Forward Address: 192.168.33.2 External Route Tag: 0 Dat abase-summary Parameter Re sponse XSR>show ip ospf data database-summa ry OSPF Router with ID (192.168.44.1) AreaID Router Network S-Net S-ASBR Type-7 Subtotal Delete Manage 0.0.0.0 2 0 2 0 N/A 4 0 0 2 203 04 91 1 AS External 0 0 0 ...

  • Enterasys X-Pedition XSR CLI - page 192

    OSPF Debug and Show Commands 5-116 Configuring the Internet Protocol For Network Parameter For Summary Parameter Display T ype  of  rou te r Ty p e  of  OSPF  route r ‐ internal,  ABR,  and  ASBR. Number  of  links To t a l  individual  links  inside  this  LS  record. Link  connected  t ...

  • Enterasys X-Pedition XSR CLI - page 193

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-117 For ASB-summary Parameter Display For External Parameter LS  T ype Summary  links  (network)  for  summary  LS  record. Link  State  ID IP  address  of  the  summarized  network. Advertising  Router Orig inating  router  ID. LS  Seq.  ...

  • Enterasys X-Pedition XSR CLI - page 194

    OSPF Debug and Show Commands 5-118 Configuring the Internet Protocol For NSSA-external Parameter For Dat abase-summary Parameter Length Length  of  the  LS  record  in  bytes. Network  mask Mask  of  the  network. Metric  type OSPF  type  1  or  2  metric. TO S 0  due  to  non  support  ...

  • Enterasys X-Pedition XSR CLI - page 195

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-119 show ip osp f interface This  command  displays  interface  OSPF ‐ related  information,  including  network  type,  priority ,  cost,  hello,  interv al,  dead  interval. Synt ax show ip ospf interface [ type ][ number ] Mode EXEC  or  Glob ...

  • Enterasys X-Pedition XSR CLI - page 196

    OSPF Debug and Show Commands 5-120 Configuring the Internet Protocol show ip osp f neighbor This  command  displays  the  state  of  communication  betw een  this  router  and  it s  neighbor  routers. Synt ax show ip ospf neighbor [ type number ] [ neighbor-id ] [ d etail ] Mode EXEC  or  Global  con ...

  • Enterasys X-Pedition XSR CLI - page 197

    OSPF Debug and Show Commands XSR CLI Reference Guide 5-121 Sample Output The  following  are  sample  responses: XSR#show ip ospf neighbor ID Pri State Dead Intvl Address Address 10.7.7.1 1 FULL 40 10.5.6.1 FastEthernet6 10.0.0.1 1 FULL 40 10.1.1.1 FastEthernet3 XSR#show ip ospf neighbor detail Neighbor 10.7.7.1 interface address 10.5.6 ...

  • Enterasys X-Pedition XSR CLI - page 198

    OSPF Debug and Show Commands 5-122 Configuring the Internet Protocol Sample Output The  following  is  sample  output: XSR>show ip ospf virtual-links Virtual Link OSPF_VLI to router 192. 168.22.1 is up Run as demand circuit. DoNotAge LSA not allowed (Number o f Dcbitless LSA is 2). Transit area 4, via interface Seri al1, Cost of usin ...

  • Enterasys X-Pedition XSR CLI - page 199

    RIP Commands XSR CLI Reference Guide 5-123 RIP Commands dist ance (RIP) This  command  defines  administrative  distances  (route  prefe rence)  in  the  RIP  domain.  The  RIP  default  ranks  higher  than  all  other  routed  di stances. If  sever al  routes  to  the  same ...

  • Enterasys X-Pedition XSR CLI - page 200

    RIP Commands 5-124 Configuring the Internet Protocol Mode Router  configuration:  XSR(config-router)# Example The  following  example  sets  the  RIP  administrative  distance  to  85 : XSR(config)#router rip XSR(config-router)#distance 85 distribute-list This  RIP  command  filters  netw orks  receiv ...

  • Enterasys X-Pedition XSR CLI - page 201

    RIP Commands XSR CLI Reference Guide 5-125 ip rip authentication This  command  sets  or  deletes  the  single  authentication  key  used  for  RIP  authentication  on  the  interface.  Authentication  can  be  used  only  if  a  key  exis ts.  Deleting  an  existing ? ...

  • Enterasys X-Pedition XSR CLI - page 202

    RIP Commands 5-126 Configuring the Internet Protocol FastEthernet  port  2  is  instructed  to  be  totally  passive  (no  adve rtising  on  it,  no  sending  of  triggered  updates,  and  no  receiving  of  updates). Serial  1  is  allow ed  to  re ceive  both  ...

  • Enterasys X-Pedition XSR CLI - page 203

    RIP Commands XSR CLI Reference Guide 5-127 Mode Interface  configuration:  XSR(config-if< xx >)# Default No  authentication  mode  specified. Examples This  example  sets  text  authentication  mode  and  the  key  XenObhobe  for  use  on  FastEthernet  1: XSR(config)#interface fastethe ...

  • Enterasys X-Pedition XSR CLI - page 204

    RIP Commands 5-128 Configuring the Internet Protocol Default Allows  RIP  to  respond  to  a  triggered  update. Example This  example  prevents  RIP  from  responding  to  a  request  for  tri ggered  updates  on  F 1 : XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip rip ...

  • Enterasys X-Pedition XSR CLI - page 205

    RIP Commands XSR CLI Reference Guide 5-129 Figure 5-3 Offs et Example ip rip receive version This  command  sets  RIP  v1  or  v2  for  update  packets  receiv ed  on  the  port. Synt ax ip rip receive version [ 1 ] [ 2 ] Synt ax of the “no” Form The  no  form  of  this  command  restores ...

  • Enterasys X-Pedition XSR CLI - page 206

    RIP Commands 5-130 Configuring the Internet Protocol ip rip send version This  command  sets  RIP  v1  or  v2  for  update  packets  sent  on  the  interface. Synt ax ip rip send version { 1 | 2 | r1compatible } Synt ax of the “no” Form The  no  form  restore s  the  ver s io n  of  up ...

  • Enterasys X-Pedition XSR CLI - page 207

    RIP Commands XSR CLI Reference Guide 5-131 Default IP  split ‐ horizon Example The  following  command  sets  split  horizon  for  packets  to  be  transmitted  by  RIP  on  interfac e  1 : XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip split-horizon neighbor This  command  d ...

  • Enterasys X-Pedition XSR CLI - page 208

    RIP Commands 5-132 Configuring the Internet Protocol network This  command  attaches  a  ne twork  of  directly  connected  networks  to  a  RI P  routing  process. Synt ax network netAddress Synt ax of the “no” Form The  no  form  of  this  command  disables  RIP  on  the  sp ...

  • Enterasys X-Pedition XSR CLI - page 209

    RIP Commands XSR CLI Reference Guide 5-133 Example This  example  sets  F2  as  a  passiv e  interface.  No  RIP  updates  will  be  transmitted  on  F2 : XSR(config-router)#passive-interface fastethernet 2 receive-interface This  command  allows  RIP  to  receiv e  update  packets ? ...

  • Enterasys X-Pedition XSR CLI - page 210

    RIP Commands 5-134 Configuring the Internet Protocol Synt ax of the “no” Form The  no  form  of  this  command  cancels  the  redistribution  of  routes: no redistribute from_protocol [ metric metric value ] Mode Router  configuration:  XSR(config-router)# Default Disabled Examples This  example  redist ...

  • Enterasys X-Pedition XSR CLI - page 211

    RIP Commands XSR CLI Reference Guide 5-135 Example XSR(config)#router rip XSR(config-router)# timers This  command  configures  RIP  timers. Synt ax timers basic [ update | invalid | flu sh ] Synt ax of the “no” Form The  no  form  of  this  command  resets  the  timers  to  the  defa ult  val u e ...

  • Enterasys X-Pedition XSR CLI - page 212

    RIP Show Commands 5-136 Configuring the Internet Protocol RIP Show Commands show ip rip This  command  displays  configuration  data  and  stati stics  global  to  all  ports. Synt ax show ip rip [ interface | database ] Mode EXEC  or  Global  configuration: XSR> or XSR(config)# Sample Output The  follow ...

  • Enterasys X-Pedition XSR CLI - page 213

    RTP Header Compression Commands XSR CLI Reference Guide 5-137 Routing Source Information: 192.168.28.0/24 via: 192.168.29.22 cost:2 age:16 FastEthernet2 1.1.1.1/32 via: 192.168.29.22 cost:2 age:16 FastEthernet2 10.0.0.0/32 via: 201.1.1.0 cost:2 age: - Serial2/0:1.1 The  following  is  sample  output  with  the  interface  op ...

  • Enterasys X-Pedition XSR CLI - page 214

    RTP Header Compression Commands 5-138 Configuring the Internet Protocol UDP  payload  must  be  less  than  500  bytes Pa c k e t  must  not  be  fragmented The  destination  port  of  the  packet  must  be  within  user  configured  port  range  (there  is  no  restri ...

  • Enterasys X-Pedition XSR CLI - page 215

    RTP Header Compression Commands XSR CLI Reference Guide 5-139 Mode Interface  configuration:  XSR(config-if<xx>)# This  command  is  applicable  only  on  serial  interface  with  PPP  encapsulation.  Note:  The  XSR  currently  does  not  block  this  command  on ʺ interfa ...

  • Enterasys X-Pedition XSR CLI - page 216

    RTP Header Compression Commands 5-140 Configuring the Internet Protocol Mode Interface  configuration:  XSR(config-if<xx>)# This  command  is  applicable  only  on  serial  interface  with  PPP  encapsulation.  Note:  The  XSR  currently  does  not  block  this  command  on  ...

  • Enterasys X-Pedition XSR CLI - page 217

    RTP Header Compression Commands XSR CLI Reference Guide 5-141 show ip rtp header compression interface serial This  command  displays  the  RT P  header  compression  statistics  for  the  specif ic  PPP  serial  interface. Note:  The  existing  command  “show  ppp  interface  serial” ...

  • Enterasys X-Pedition XSR CLI - page 218

    Triggered on Demand RIP Commands 5-142 Configuring the Internet Protocol T riggered on Demand RIP Commands The  following  commands  are  subsets  of  triggered  RIP  functionality: • ip rip max-retransmissions -  Specifies  the  maximum  number  of  retransmissions.  Refer  to  page  190  ...

  • Enterasys X-Pedition XSR CLI - page 219

    Triggered on Demand RIP Commands XSR CLI Reference Guide 5-143 • ip rip triggered-on-demand ‐ Enables  the  functionality  on  the  specified  interface.  Refer  to  page  192  for  the  command  definition. ip rip max-retransmissions This  command  sets  the  maximum  number  of ...

  • Enterasys X-Pedition XSR CLI - page 220

    Triggered on Demand RIP Commands 5-144 Configuring the Internet Protocol Synt ax of the “no” Form The  no  command  resets  maximum  retransmissions  to  the  default: no ip rip polling interval Mode Interface  configuration:  XSR(config-if< xx >)# Default 30  seconds Example The  following  example ...

  • Enterasys X-Pedition XSR CLI - page 221

    Policy-Based Routing Commands XSR CLI Reference Guide 5-145 Synt ax of the “no” Form The  no  form  of  this  command  disables  triggered  RIP  on  the  interface: no ip rip triggered-on-demand Mode Interface  configuration:  XSR(config-if< xx >)# Default Disabled Example The  following  examp ...

  • Enterasys X-Pedition XSR CLI - page 222

    Policy-Based Routing Commands 5-146 Configuring the Internet Protocol Examples The  following  example  enables  PBR  on  interface  FastEthernet  2 : XSR(config-if<F2>)#ip policy The  following  example  enables  PBR  on  interface  Di aler  57: XSR(config-if<D57>)#ip policy route-map pbr ...

  • Enterasys X-Pedition XSR CLI - page 223

    Policy-Based Routing Commands XSR CLI Reference Guide 5-147 match ip address This  command  associates  the  PBR  policy  with  a  configured  Access  Control  List  (ACL). Synt ax match ip address access-number Synt ax of the “no” Form The  no  command  deletes  the  specified  ACL  matc ...

  • Enterasys X-Pedition XSR CLI - page 224

    PBR Clear and Show Commands 5-148 Configuring the Internet Protocol set interface This  command  specifies  an  XSR  interface  as  the  forw arding  port  for  Po l i c y  Based  Routing. Synt ax set interface interface-num Synt ax of the “no” Form The  no  command  deletes  the  specified ...

  • Enterasys X-Pedition XSR CLI - page 225

    ARP Commands XSR CLI Reference Guide 5-149 XSR>show ip pbr-cache Source Destination Age(sec) IP Prot TCP/UDP Port ICMP Code 192.168.1.1 192.168.27.1 109 1 8 192.168.1.1 192.168.27.33 70 255 192.168.1.1 192.168.27.33 50 6 (23, 23) Parameter Descriptions show route-map pbr This  command  displays  the  Po l i c y  Map  Ta b l e ? ...

  • Enterasys X-Pedition XSR CLI - page 226

    ARP Commands 5-150 Configuring the Internet Protocol Synt ax arp ip-address hardware-address Synt ax of the “no” Form The  no  form  of  this  command  deletes  the  specified  permanent  ARP  entry: no arp ip-address hardware-address Mode Global  configuration:  XSR(config)# Default No  permanent  A ...

  • Enterasys X-Pedition XSR CLI - page 227

    Other IP Commands XSR CLI Reference Guide 5-151 Example This  example  adds  a  permanent  ARP  entry  for  the  IP  addr ess  130.2.3.1  and  sets  the  timeout  at  5  hours  (18,000  seconds)  as  shown  in  Figure 5 ‐ 4 : XSR(config)#arp 130.2.3.1 0003.4712. 7a99 XSR(conf ...

  • Enterasys X-Pedition XSR CLI - page 228

    Other IP Commands 5-152 Configuring the Internet Protocol Mode Interface  configuration: XSR(config-if< xx >)# Examples The  following  CIDR  exam ple  sets  IP  address  192.168.1.1  with  a  mask  of  /24  on  interface  F1 . XSR(config)# interface FastEthernet 1 XSR(config-if)# ip address 192 ...

  • Enterasys X-Pedition XSR CLI - page 229

    Other IP Commands XSR CLI Reference Guide 5-153 Mode Global  configuration:  XSR(config)# Example In  the  following  example,  as  shown  in  Figu re 5 ‐ 5 ,  Router  1  sets  two  candidates  for  the  def ault  route:  network  199.15.2.0  and  198.15.2.0 . XSR(config)#ip defaul ...

  • Enterasys X-Pedition XSR CLI - page 230

    Other IP Commands 5-154 Configuring the Internet Protocol Mode Interface  configuration: XSR(config-if< xx >)# Default Enabled Example The  following  example  denies  ICMP  broadcasts  on  port  FastEthernet  1: XSR(config)#access-list 100 deny ICM P any any XSR(config)#interface fastethernet 1 XSR(config-if< ...

  • Enterasys X-Pedition XSR CLI - page 231

    Other IP Commands XSR CLI Reference Guide 5-155 ip domain This  command  identifies  th e  domain  to  which  the  XSR  belongs.  If  the  command  is  reissued,  it  is  considered  an  update  of  the  domain  name  and  will  overwrite  the  old  val u e ? ...

  • Enterasys X-Pedition XSR CLI - page 232

    Other IP Commands 5-156 Configuring the Internet Protocol Parameters Synt ax of the “no” Form The  no  form  of  the  command  disables  equal ‐ cost  mu lti ‐ path: no ip equal-cost multi-path Mode Global  configuration:  XSR(config)# Default Disabled Example The  following  example  enables  equal ...

  • Enterasys X-Pedition XSR CLI - page 233

    Other IP Commands XSR CLI Reference Guide 5-157 Synt ax of the “no” Form The  no  form  of  this  command  removes  a  UDP  port  or  UDP  protocol.  If  the  UDP  protocol  is  removed,  UDP  forw arding  is  disabled. no ip forward-protocol { udp [ port ]} Mode Global  confi ...

  • Enterasys X-Pedition XSR CLI - page 234

    Other IP Commands 5-158 Configuring the Internet Protocol DHCP Relay Functionality The  DHCP  Relay  functionality  is  applied  with  the  help  of  IP  broadc ast  forw arding.  A  typical  situation,  as  shown  in  Figure 5 ‐ 7 ,  occurs  when  a  Host  re quest s  an ...

  • Enterasys X-Pedition XSR CLI - page 235

    Other IP Commands XSR CLI Reference Guide 5-159 XSR(config)#ip forward-protocol udp XSR(config)#interface fastethernet 1 XSR(config-if<F1>)#ip helper-address 192.168.1.255 XSR(config)#interface fastethernet 2 XSR(config-if<F2)#ip helper-address 192.24.1.255 ip host This  command  defines  a  static  host  name ‐ to ‐ ...

  • Enterasys X-Pedition XSR CLI - page 236

    Other IP Commands 5-160 Configuring the Internet Protocol Synt ax ip irdp [ multicast | holdtime seconds | advertinterval seconds | preference number ] Synt ax of the “no” Form The  no  form  of  this  command  disables  the  IRDP  command: no ip irdp Default s •M u l t i c a s t :  broadcast  address •H o l ...

  • Enterasys X-Pedition XSR CLI - page 237

    Other IP Commands XSR CLI Reference Guide 5-161 Mode Interface  configuration: XSR(config-if< xx >)# Default 1500 Example The  following  example  sets  the  MTU  size  to  1200  for  interface  Serial  1/0: XSR(config-if<S1/0>)#ip mtu 1200 ip proxy-arp This  command  enables/disables  Pro ...

  • Enterasys X-Pedition XSR CLI - page 238

    Other IP Commands 5-162 Configuring the Internet Protocol Synt ax ip proxy-dns enable Synt ax of the “no” Form The  no  form  of  this  command  disables  Proxy  DNS: no ip proxy-dns enable Mode Global  configuration:  XSR(config)# Default Disabled ip proxy-dns name server This  command  specifies  up  ...

  • Enterasys X-Pedition XSR CLI - page 239

    Other IP Commands XSR CLI Reference Guide 5-163 Synt ax of the “no” Form The  no  form  of  this  command  negates  IP  redirection: no ip redirects Default Enabled Mode Global  configuration:  XSR(config)# Example In  the  following  example,  IP  redirection  is  disabled : XSR(config)#no ip ...

  • Enterasys X-Pedition XSR CLI - page 240

    Other IP Commands 5-164 Configuring the Internet Protocol Mode Global  configuration:  XSR(config)# Examples This  example,  shown  in  Figure 5 ‐ 8 ,  sets  2  static  routes  to  netw orks  192.1.2.0  and  193.62.5.0  through  gateway  192.31.7.65 .  Note  that  the  distance  ...

  • Enterasys X-Pedition XSR CLI - page 241

    Other IP Commands XSR CLI Reference Guide 5-165 ip tcp adjust-mss This  command  sets  the  Maximum  Segment  Size  (MSS)  for  TCP  SYN  (synchronize)  packets.  When  the  XSR  terminates  PPP oE  traffi c,  a  PC  connected  to  the  FastEthernet  interface  may  ha ...

  • Enterasys X-Pedition XSR CLI - page 242

    Other IP Commands 5-166 Configuring the Internet Protocol ip telnet server This  command  enables  or  disable s  Te l n e t  service  to  the  XSR.  If  the  o ptional  parameter  is  not  supplied,  the  Te l n e t  server  is  enabled.  Since  the  Te l n e t  server  ...

  • Enterasys X-Pedition XSR CLI - page 243

    Other IP Commands XSR CLI Reference Guide 5-167 Synt ax ip unnumbered [ type number ] Synt ax of the “no” Form The  no  form  of  this  command  disables  the  unnumbered  interface: no ip unnumbered Mode Interface  configuration: XSR(config-if< xx >)# Default Disabled Example In  this  example ,  Se ...

  • Enterasys X-Pedition XSR CLI - page 244

    IP Clear and Show Commands 5-168 Configuring the Internet Protocol Example The  following  example  configures  a  router  identifier: XSR(config)#ip router-id 1.2.3.4 IP Clear and Show Commands clear arp-cache This  command  deletes  all  nonstatic  entries  from  the  ARP  cache. Synt ax clear arp-cach ...

  • Enterasys X-Pedition XSR CLI - page 245

    IP Clear and Show Commands XSR CLI Reference Guide 5-169 clear ip traffic-counters This  command  clears  all  IP  related  counters  (IP ,  ICMP ,  ARP ,  UDP ,  TCP ,  RIP ,  OSPF)  displayed  by  the  show ip traffic  command. Synt ax clear ip traffic-counters Mode  Privileged  EXEC: ? ...

  • Enterasys X-Pedition XSR CLI - page 246

    IP Clear and Show Commands 5-170 Configuring the Internet Protocol Internet 134.141.235.137 1 00b0.d07f.0cab ARPA FastEthernet1 Internet 134.141.235.150 0 00b0.d02c.06d2 ARPA FastEthernet1 Internet 134.141.235.155 2 00b0.d02c.077e ARPA FastEthernet1 Internet 134.141.235.124 17 00b0.d06d.b6ca ARPA FastEthernet1 Internet 58.58.58.1 - 0001.f4cc.dd02 A ...

  • Enterasys X-Pedition XSR CLI - page 247

    IP Clear and Show Commands XSR CLI Reference Guide 5-171 Sample Output The following is sample output from the command: XSR>show ip interface Dialer 0 is Admin Up Internet address is 1.1.1.1/24 Last change: 11:14 AM Rcvd: 10245 octets, 1231 unicast packets, 0 discards, 3 errors, 4 unknown prot ocol Sent: 11232 octets, 1132 unicast packets, 0 dis ...

  • Enterasys X-Pedition XSR CLI - page 248

    IP Clear and Show Commands 5-172 Configuring the Internet Protocol Internet address is 58.58.58.1, sub net mask is 255.255.255.0 Seconda ry Rcvd: 515027 octets, 3306 unicast p ackets, 0 discards, 0 errors, 0 unkno wn protocol. Sent: 363256 octets, 2472 unicast p ackets, 0 discards, 0 errors. MTU is 1500 bytes. Helper address is not set. Directed br ...

  • Enterasys X-Pedition XSR CLI - page 249

    IP Clear and Show Commands XSR CLI Reference Guide 5-173 show ip ird p This  command  displays  ICMP  router  discov ery  settings. Synt ax show ip irdp Configuration Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  is  sample  output: XSR>show ip irdp FastEth ...

  • Enterasys X-Pedition XSR CLI - page 250

    IP Clear and Show Commands 5-174 Configuring the Internet Protocol Sample Output The  following  is  sample  output  from  the  command: XSR>show ip proxy-dns cache Name Age(sec) www.enterasys.com 100 www.test.com 10 Parameter Description show ip route This  command  displays  information  about  th e  Rout ...

  • Enterasys X-Pedition XSR CLI - page 251

    IP Clear and Show Commands XSR CLI Reference Guide 5-175 Sample Output The  following  is  sample  output.  Note  the  route  costs  as  indicate d  within  brackets. XSR>show ip route Codes: C-connected, S-static, R-RIP, O-OSPF, IA-OSPF interarea N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 ...

  • Enterasys X-Pedition XSR CLI - page 252

    IP Clear and Show Commands 5-176 Configuring the Internet Protocol show ip st atic dat abase This  command  displays  static  route  information  including  the  destination  IP  address ,  gat eway  IP  address,  and  administrative  distance . Synt ax show ip static database [ A.B.C.D. A. B.C.D./mas ...

  • Enterasys X-Pedition XSR CLI - page 253

    IP Clear and Show Commands XSR CLI Reference Guide 5-177 show ip traffic This  command  displays  general  IP  protocols  statistics. Synt ax show ip traffic Mode EXEC  or  Global  configuration: XSR> or XSR(config)# Sample Output The  following  is  sample  output: XSR>show ip traffic IP statistics: Rcv ...

  • Enterasys X-Pedition XSR CLI - page 254

    IP Clear and Show Commands 5-178 Configuring the Internet Protocol 0 link state updates, 0 link state a cks Sent: 0 total ARP statistics: Rcvd: 87441 requests, 5 replies Sent: 3 requests, 36 replies (0 proxy) Parameter Description show resources This  command  displays  the  allow a ble  number  of  resource  entries  cre ...

  • Enterasys X-Pedition XSR CLI - page 255

    IP Clear and Show Commands XSR CLI Reference Guide 5-179 Max Unresolved ARP Requests| 0| 384| 0| 0 Routing Table Size| 3| 352| 1056| 0 Number of Static Routes| 2| 96| 192| 0 Number of Secondary IP| 0| 576| 0| 0 Number of Virtual IP| 0| 1344| 0| 0 IP Helper Addresses| 0| 96| 0| 0 UDP Broadcast Fwd Entries| 7| 96| 672| 0 OSPF LSA type 1| 2| 9408| 188 ...

  • Enterasys X-Pedition XSR CLI - page 256

    IP Clear and Show Commands 5-180 Configuring the Internet Protocol Parameter Description show tcp This  command  displays  TCP  statistics. Synt ax show tcp { connections | general } Configuration Mode EXEC  or  Global  configuration: XSR> or XSR(config)# Sample Output The  following  are  sample  responses: Conn ...

  • Enterasys X-Pedition XSR CLI - page 257

    IP Clear and Show Commands XSR CLI Reference Guide 5-181 4 transitions from LISTEN to SYN-RCV D 2 transitions from SYN-SENT or SYN-R CVD to CLOSED 2 transitions from ESTABLISHED or CL OSE-WAIT to CLOSE Parameter Description Connection st ate - Possible stat es for a TCP connection: telnet ip_address This  command  supports  Te l n e t t i ...

  • Enterasys X-Pedition XSR CLI - page 258

    Network Address Translation Commands 5-182 Configuring the Internet Protocol Default Standard  Te l n e t  port  23.  If  the  port  is  not  pro vided,  the  client  wi ll  try  to  connect  to  port  23  on  the  remote  serv er . Example The  following  example  connects ...

  • Enterasys X-Pedition XSR CLI - page 259

    Network Address Translation Commands XSR CLI Reference Guide 5-183 The  following  example  clears  a  specific  UDP  entry  from  the  NAPT  table: XSR#clear  ip  nat  translation  fastEthernet  1  17  200.2.233.1  1220  192.168.27.95  1220 1  NAP T  entries  or  NA T  m ...

  • Enterasys X-Pedition XSR CLI - page 260

    Network Address Translation Commands 5-184 Configuring the Internet Protocol Next Mode IP  Local  P ool  configuration:  XSR(ip-local-pool) # Example The  following  example  creates  local  IP  address  pool  marketing ,  which  contains  all  IP  addr esses  in  the  range  203.5 7.99 ...

  • Enterasys X-Pedition XSR CLI - page 261

    Network Address Translation Commands XSR CLI Reference Guide 5-185 Synt ax ip nat pool name Synt ax of the “no” Form The  no  command  removes  one  or  more  ad dresses  from  the  NA T  pool: no ip nat pool name Mode Global  configuration:  XSR(config)# Example The  following  example  configure ...

  • Enterasys X-Pedition XSR CLI - page 262

    Network Address Translation Commands 5-186 Configuring the Internet Protocol XSR(config)#ip nat service list 1 ft p tcp port 2021 XSR(config)#access-list 1 permit 10. 1.1.1 This  example  sets  non ‐ standard  port  2021  and  standard  port  21  for  FT P .  Be  aware  that  if  the  FT P  se ...

  • Enterasys X-Pedition XSR CLI - page 263

    Network Address Translation Commands XSR CLI Reference Guide 5-187 ip nat source int f-st atic (interface mode) This  command  configures  a  single  static  translation  entry  in  the  Network  Ad dress  T ranslation  (NA T)  table.  Interface  static  NA T  is  similar  to  global ? ...

  • Enterasys X-Pedition XSR CLI - page 264

    Network Address Translation Commands 5-188 Configuring the Internet Protocol Synt ax of the “no” Form The  no  form  of  the  command  removes  a  single  static  translation  entry: no ip nat source static local-ip glo bal-ip Mode Global  configuration:  XSR(config)# Example The  following  example ...

  • Enterasys X-Pedition XSR CLI - page 265

    Network Address Translation Commands XSR CLI Reference Guide 5-189 Default s •T i m e o u t :  180  seconds  (3  minutes) •U D P ‐ timeout:  300  seconds  (5  min utes) •T C P ‐ timeout:  86,400  seconds  (24  hours) •I C M P ‐ timeout:  60  seconds Example The  example  below  times ...

  • Enterasys X-Pedition XSR CLI - page 266

    Network Address Translation Commands 5-190 Configuring the Internet Protocol NAPT using address: 10.10.10.2 Num translations: 8 ------------------------------------ --- Pro Private Host NAT Addr External Host Idle (Local IP Addr) (Global IP Addr) UDP 192.168.50.90:1024 10.10.10. 2:20002 10.10.10.15:3664 24 UDP 192.168.50.90:1024 10.10.10. 2:20001 1 ...

  • Enterasys X-Pedition XSR CLI - page 267

    Virtual Router Redundancy Protocol Commands XSR CLI Reference Guide 5-191 V irtual Router Redundan cy Protocol Commands vrrp <group> adver-int This  command  configures  the  interval  betw een  successive  advertisements  sent  by  the  master  VR  in  a  virtual  group.  Advertisements  ...

  • Enterasys X-Pedition XSR CLI - page 268

    Virtual Router Redundancy Protocol Commands 5-192 Configuring the Internet Protocol message  is  accepted  and  if  not,  it  is  discarded.  All  routers  within  the  group  must  share  the  same  authentication  string.  Synt ax vrrp group authentication string Synt ax of the “no” ...

  • Enterasys X-Pedition XSR CLI - page 269

    Virtual Router Redundancy Protocol Commands XSR CLI Reference Guide 5-193 Synt ax vrrp group ip ipaddress Synt ax of the “no” Form The  no  form  of  this  command  removes  the  virtual  IP  address  on  a  port: no vrrp group ip ipaddress Default s •N o  VR  configured •G r o u p :  1 Mode I ...

  • Enterasys X-Pedition XSR CLI - page 270

    Virtual Router Redundancy Protocol Commands 5-194 Configuring the Internet Protocol Default s • Disabled ‐ the  VR  master  will  not  respond  to  an  ICMP  echo  request  sent  to  the  virtual  IP  address  if  it  is  not  the  physical  owner . •I f  no  gro ...

  • Enterasys X-Pedition XSR CLI - page 271

    Virtual Router Redundancy Protocol Commands XSR CLI Reference Guide 5-195 Mode Interface  configuration:  XSR(config-if< xx >)# Examples The  following  example  enables  preempt  for  virtual  router  group  1  with  a  2 ‐ second  de lay  set  on  F1 : XSR(config)#interface fastetherne ...

  • Enterasys X-Pedition XSR CLI - page 272

    Virtual Router Redundancy Protocol Commands 5-196 Configuring the Internet Protocol vrrp <group> track This  command  allows  a  Vir t u a l  Router  (VR)  to  track  another  interface  (FastEthernet,  Serial,  Dialer  or  Multilink  P PP)  or  one  or  moe  routes  on  the ...

  • Enterasys X-Pedition XSR CLI - page 273

    VRRP Clear and Show Commands XSR CLI Reference Guide 5-197 XSR(config)#interface fastethernet 1 XSR(config-if)#vrrp 2 track serial 1/0 This  example  disables  the  track ing  of  interface  Serial  1/0  by  interface  F1  on  VR  2 : XSR(config-if)#no vrrp 2 track VRRP Clear and Show Commands clear vrrp-co ...

  • Enterasys X-Pedition XSR CLI - page 274

    VRRP Clear and Show Commands 5-198 Configuring the Internet Protocol Mode EXEC:  XSR> Sample Output The  following  sample  output  displays  configuration  data  for  all  virtual  routers  on  this  router: XSR#show vrrp Ethernet Interface: 1 Group ID: 1 State: backup Preempt: Preempt Enabled Priority: ...

  • Enterasys X-Pedition XSR CLI - page 275

    VRRP Clear and Show Commands XSR CLI Reference Guide 5-199 InvalidTypePktsRcvd: 0 UnknownAuthType: 0 AuthTypeErrors: 10 AuthFailures: 0 show vrrp interface This  command  displays  all  the  virtual  routers  and  the ir  status  on  a  specified  interface. Synt ax show vrrp interface < interface > Mode ...

  • Enterasys X-Pedition XSR CLI - page 276

    VRRP Clear and Show Commands 5-200 Configuring the Internet Protocol show vrrp summary This  command  displays  VRRP  summary  information  on  this  router . Synt ax show vrrp summary Mode EXEC:  XSR> Sample Output The  following  sample  output  displays  VRRP  summary  data  on  the  XS ...

  • Enterasys X-Pedition XSR CLI - page 277

    VRRP Clear and Show Commands XSR CLI Reference Guide 5-201 Maximum number of virtual addresses per VR: 11 Number of virtual IP address in use: Fast Ethernet 1 Fast Ethernet 2 F ast Ethernet 3 VR1 1 1 1 VR3 1 VR2 1 ------------------------------------ ------------------------ ...

  • Enterasys X-Pedition XSR CLI - page 278

    VRRP Clear and Show Commands 5-202 Configuring the Internet Protocol ...

  • Enterasys X-Pedition XSR CLI - page 279

    XSR CLI Reference Guide 6-83 6 Configuring the Border Gateway Protocol Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  below . BGP Configuration Commands The  following  command  subsets  define  BGP  functionality  on  the  XSR, ? ...

  • Enterasys X-Pedition XSR CLI - page 280

    BGP Configuration Commands 6-84 Configuring the Border Gateway Pr otocol •N e t w o r k s •N e i g h b o r  parameters • Routing  policies Synt ax router bgp autonomous-system Synt ax of the “no” Form The  no  form  of  this  command  sets  the  default  parameter ‐ disabled: no router bgp autonomo ...

  • Enterasys X-Pedition XSR CLI - page 281

    BGP Configuration Commands XSR CLI Reference Guide 6-85 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  aggregate  entry  from  the  table: no aggregate-address address mask Mode Router  configuration:  XSR(config-router)# Default Disabled Example The  following  example ? ...

  • Enterasys X-Pedition XSR CLI - page 282

    BGP Configuration Commands 6-86 Configuring the Border Gateway Pr otocol Mode Router  configuration:  XSR(config-router)# Default Enabled Example The  following  example  configures  summarization  in  BGP  process  100 : XSR(config)#router bgp 100 XSR(config-router)#auto-summary bgp always-comp are-med This  comman ...

  • Enterasys X-Pedition XSR CLI - page 283

    BGP Configuration Commands XSR CLI Reference Guide 6-87 bgp bestp ath med missing-as-worst This  command  specifies  that  a  route  with  a  MED  is  alw ays  considered  better  tha n  a  route  without  a  MED  by  causing  the  missing  MED  attribute  to  have  a ...

  • Enterasys X-Pedition XSR CLI - page 284

    BGP Configuration Commands 6-88 Configuring the Border Gateway Pr otocol Example This  example  first  disables  the  default  reflection  setting  on  this  router  then  restores  the  default: XSR(config)#router bgp 100 XSR(config-router)#no bgp client-to- client reflection XSR(config-router)#bgp client- ...

  • Enterasys X-Pedition XSR CLI - page 285

    BGP Configuration Commands XSR CLI Reference Guide 6-89 Synt ax bgp confederation identifier autonom ous-system Synt ax of the “no” Form The  no  form  of  this  command  removes  the  confederation  id entifier: no bgp confederation identifier Mode Router  configuration:  XSR(config-router)# Example The  fol ...

  • Enterasys X-Pedition XSR CLI - page 286

    BGP Configuration Commands 6-90 Configuring the Border Gateway Pr otocol bgp dampening This  command  enables  BGP  route  dampening  to  minimize  propagation  of  flapping  routes  (repeatedly  available/unav ailable)  across  the  netw ork.  Each  time  a  route  flaps,  a  pen ...

  • Enterasys X-Pedition XSR CLI - page 287

    BGP Configuration Commands XSR CLI Reference Guide 6-91 bgp default local-preference This  command  changes  the  default  local  preference  val u e .  The  path  with  the  highest  local  preference  va l u e  is  preferred  over  competing  paths  to  the  same  destination ...

  • Enterasys X-Pedition XSR CLI - page 288

    BGP Configuration Commands 6-92 Configuring the Border Gateway Pr otocol Default s •E x t e r n a l :  20 • Internal:  200 Mode Router  configuration:  XSR(config-router)# Example This  example  sets  BGP  external  and  internal  administrati ve  distances  to  50  and  150,  respective ly: XS ...

  • Enterasys X-Pedition XSR CLI - page 289

    BGP Configuration Commands XSR CLI Reference Guide 6-93 Example The  following  example  sets  the  neighbor  adverti sement ‐ interv al  va l ue  within  BGP  process  100 .  Note  that  the  neighbor remote-as command  must  be  executed  before  this  command  can  be  ent ...

  • Enterasys X-Pedition XSR CLI - page 290

    BGP Configuration Commands 6-94 Configuring the Border Gateway Pr otocol neighbor distribute-list This  command  distributes  the  information  specified  in  an  access ‐ list  to  a  BGP  neighbor .  Before  entering  this  command,  a  neighbor  or  peer  group  must  be  ...

  • Enterasys X-Pedition XSR CLI - page 291

    BGP Configuration Commands XSR CLI Reference Guide 6-95 neighbor ebgp-multihop This  command  connects  the  BGP  neighbors  on  networks  that  are  not  directly ‐ connected  to  the  network  of  the  router  that  this  command  is  entered  on.  Before  entering  t ...

  • Enterasys X-Pedition XSR CLI - page 292

    BGP Configuration Commands 6-96 Configuring the Border Gateway Pr otocol Synt ax of the “no” Form The  no  form  of  this  command  removes  the  specified  neighbor: no neighbor { ip-address | peer-group -name } filter-list filter-list Mode Router  configuration:  XSR(config-router)# Example This  example ? ...

  • Enterasys X-Pedition XSR CLI - page 293

    BGP Configuration Commands XSR CLI Reference Guide 6-97 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  specified  neighbor: no neighbor { ip-address | peer-group -name } maximum-prefix value [ threshold ] [ warning-only ] Mode Router  configuration:  XSR(config-router)# Default s •N o ...

  • Enterasys X-Pedition XSR CLI - page 294

    BGP Configuration Commands 6-98 Configuring the Border Gateway Pr otocol Example The  following  example  sets  the  router  at  192.168.1.1  as  the  next  hop: XSR(config)#router bgp 100 XSR(config-router)#neighbor 192.168. 1.1 remote-as 101 XSR(config-router)#neighbor 192.168.1.1 next-hop-sel f neighbor p assword ...

  • Enterasys X-Pedition XSR CLI - page 295

    BGP Configuration Commands XSR CLI Reference Guide 6-99 neighbor peer-group This  command  creates  a  BGP  peer  group  and  assigns  a  BGP  neighbor  to  a  peer  group. Synt ax neighbor { ip-address | peer-group-na me } peer-group [ peer-group-name ] Synt ax of the “no” Form The  no  form ? ...

  • Enterasys X-Pedition XSR CLI - page 296

    BGP Configuration Commands 6-100 Configuring the Border Gateway Protocol Mode Router  configuration:  XSR(config-router)# Example The  following  example  configures  two  neighbors.  Neighbor  192.168.1.1  is  an  external  neighbor  since  the  AS  number  of  101  dif fers  from  ...

  • Enterasys X-Pedition XSR CLI - page 297

    BGP Configuration Commands XSR CLI Reference Guide 6-101 neighbor route-reflector-client This  command  establishes  the  router  that  this  command  wa s  entered  on  as  a  BGP  route  reflector .  This  command  also  identifies  the  specif ied  neighbor  router  as  t ...

  • Enterasys X-Pedition XSR CLI - page 298

    BGP Configuration Commands 6-102 Configuring the Border Gateway Protocol Example The  following  example  sets  a  neighbor ’ s  community: XSR(config)#router bgp 100 XSR(config-router)#neighbor 192.168. 1.1 remote-as 101 XSR(config-router)#neighbor 192.168.1.1 send-communi ty neighbor shut down This  command  disables  ...

  • Enterasys X-Pedition XSR CLI - page 299

    BGP Configuration Commands XSR CLI Reference Guide 6-103 Synt ax of the “no” Form The  no  form  of  this  command  returns  to  the  command  default: no neighbor { ip-address | peer-group -name } soft-reconfiguration inbound Mode Router  configuration:  XSR(config-router)# Default No  soft  reconfigur ...

  • Enterasys X-Pedition XSR CLI - page 300

    BGP Configuration Commands 6-104 Configuring the Border Gateway Protocol Mode Router  configuration:  XSR(config-router)# Example This  example  sets  the  peer  keep ‐ aliv e  to  10  seconds  and,  subsequently ,  the  hold ‐ time  to  30  seconds: XSR(config)#router bgp 100 XSR(config-router ...

  • Enterasys X-Pedition XSR CLI - page 301

    BGP Configuration Commands XSR CLI Reference Guide 6-105 neighbor weight This  command  specifies  a  we ig ht  va l ue  for  a  connection  to  a  neighbor  or  a  BGP  peer  group.  Synt ax neighbor { ip-address | peer-group-na me } weight value Synt ax of the “no” Form The  no  form ? ...

  • Enterasys X-Pedition XSR CLI - page 302

    BGP Configuration Commands 6-106 Configuring the Border Gateway Protocol Synt ax of the “no” Form The  no  form  of  this  command  removes  the  configured  filter  li st: no ip as-path access-list access-lis t-number Mode Global  configuration:  XSR(config)# Example The  following  example  configu ...

  • Enterasys X-Pedition XSR CLI - page 303

    BGP Configuration Commands XSR CLI Reference Guide 6-107 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  commmunity  list  number: no community-list community-list-num ber Mode Global  configuration:  XSR(config)# Example This  example  configures  IP  community  list ? ...

  • Enterasys X-Pedition XSR CLI - page 304

    BGP Configuration Commands 6-108 Configuring the Border Gateway Protocol Synt ax of the “no” Form The  no  form  removes  the  network  from  the  routing  table: no network network-number [ mask netw ork-mask ] Mode Router  configuration:  XSR(config-router)# Example The  following  example  configures ...

  • Enterasys X-Pedition XSR CLI - page 305

    BGP Configuration Commands XSR CLI Reference Guide 6-109 Mode Router  configuration:  XSR(config-router)# Default Redistribution  is  not  enabled. Example The  following  example  redistributes  static  routes  into  BGP: XSR(config)#router bgp 100 XSR(config-router)#redistribute stat ic synchronization This  ...

  • Enterasys X-Pedition XSR CLI - page 306

    Route Map Commands 6-110 Configuring the Border Gateway Protocol Synt ax timers bgp keep-alive Synt ax of the “no” Form The  no  form  of  this  command  deletes  the  timers  valu e : no timers bgp Mode Router  configuration:  XSR(config-router)# Default s •K e e p a l i v e  timer:  30  seconds •H ...

  • Enterasys X-Pedition XSR CLI - page 307

    Route Map Commands XSR CLI Reference Guide 6-111 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  patch  li st  number: no match as-path path-list-number Mode Route ‐ map  configuration:  XSR(config-route-map)# Example This  example  sets  the  match  as ‐ path  i ...

  • Enterasys X-Pedition XSR CLI - page 308

    Route Map Commands 6-112 Configuring the Border Gateway Protocol Mode Route ‐ map  configuration:  XSRA(config-route-map)# Default No  match  based  on  community  list Example The  following  example  configures  the  match  community  va l u e  in  the  context  of  configuring  a  ...

  • Enterasys X-Pedition XSR CLI - page 309

    Route Map Commands XSR CLI Reference Guide 6-113 Mode Route ‐ map  configuration:  XSR(config-route-map)# Example The  following  example  sets  the  match  metric  to  300 : XSR(config)#route-map 1 permit 1 XSR(config-route-map)#match metric 300 match ip address This  command  match es  IP  address es ? ...

  • Enterasys X-Pedition XSR CLI - page 310

    BGP Set Commands 6-114 Configuring the Border Gateway Protocol Synt ax match ip next-hop access-list-number Synt ax of the “no” Form The  no  form  of  this  command  removes  the  match  next  hop  va l u e : no match ip next-hop access-list-num ber Mode Route ‐ map  configuration:  XSR(config-route-map ...

  • Enterasys X-Pedition XSR CLI - page 311

    BGP Set Commands XSR CLI Reference Guide 6-115 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  AS  path  va lu e : no set as-path Mode Route ‐ map  configuration:  XSR(config-route-map)# Example The  following  example  configures  the  as ‐ path  va l u e  in ...

  • Enterasys X-Pedition XSR CLI - page 312

    BGP Set Commands 6-116 Configuring the Border Gateway Protocol Synt ax of the “no” Form The  no  form  of  this  command  removes  the  se t  community  val u e : no set community Mode Route ‐ map  configuration:  XSR(config-route-map)# Example The  fol lowing  example  configures  the  set ? ...

  • Enterasys X-Pedition XSR CLI - page 313

    BGP Set Commands XSR CLI Reference Guide 6-117 •T h e  XSR  penalizes  a  route  marked  as  unstable  with  a  va l u e  of  1024  each  time  it  fails.  If  penalties  accrue  beyond  the  suppress  threshold  you  set,  the  route  is  no  longer  adv ...

  • Enterasys X-Pedition XSR CLI - page 314

    BGP Set Commands 6-118 Configuring the Border Gateway Protocol XSR(config)#router bgp 100 XSR(config)#bgp dampening route-map 1 set ip next-hop This  command  specifies  where  to  output  packets  that  pass  a  match  clause  of  a  route  map  for  policy  routing.  It  modifies  the ...

  • Enterasys X-Pedition XSR CLI - page 315

    BGP Set Commands XSR CLI Reference Guide 6-119 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  lo cal  preference  val u e: no set local-preference value Mode Route ‐ map  configuration:  XSR(config-route-map)# Default Preference  val u e :  100. Example The  following  ...

  • Enterasys X-Pedition XSR CLI - page 316

    BGP Set Commands 6-120 Configuring the Border Gateway Protocol Mode Route ‐ map  configuration:  XSR(config-route-map)# Default The  dynamically ‐ learned  metric  valu e . Example The  following  example  displays  how  the  set  metric  command  is  used  to  update  the  val u e  of ...

  • Enterasys X-Pedition XSR CLI - page 317

    BGP Set Commands XSR CLI Reference Guide 6-121 Mode Route ‐ map  configuration:  Router(config-route-map)# Default The  default  val ue  for  this  command  is  the  de fault  val u e  for  the  origin  code.  The  default  val u e  for  the  origin  code  is  incomplete  ...

  • Enterasys X-Pedition XSR CLI - page 318

    BGP Clear and Show Commands 6-122 Configuring the Border Gateway Protocol Example The  following  example  configures  the  weig ht  parameter  in  the  context  of  configuring  route  map  1  and  applying  it  to  updates  arriving  from  tw o  remote  neighbors: XSR(config) ...

  • Enterasys X-Pedition XSR CLI - page 319

    BGP Clear and Show Commands XSR CLI Reference Guide 6-123 Synt ax clear ip bgp {* | address | peer-gro up peer-group-name } [ soft [ in | out ]]} Mode Privileged  EXEC:  XSR# Examples This  example  displays  all  BGP  connections  and  neighbors  cleared  by  means  of  a  hard  rese t,  the  m ...

  • Enterasys X-Pedition XSR CLI - page 320

    BGP Clear and Show Commands 6-124 Configuring the Border Gateway Protocol show ip bgp This  command  displays  entries  in  the  BGP  routing  table. Synt ax show ip bgp [ network ][ network - mask ][ longer - prefixes ] Mode EXEC  configuration:  XSR> Examples The  following  is  sample  output  from ...

  • Enterasys X-Pedition XSR CLI - page 321

    BGP Clear and Show Commands XSR CLI Reference Guide 6-125 Display Parameters The  following  is  sample  output  from  the  command: XSR#show ip bgp 55.5.5.0/24 BGP routing table entry for 55.5.5.0 255.255.255.0 Paths: (2 available, learned over EB GP) AS Path 200, Aggregator 500 1.2.3.4 Next Hop 52.52.52.3 from 52.52.52.3 (52. ...

  • Enterasys X-Pedition XSR CLI - page 322

    BGP Clear and Show Commands 6-126 Configuring the Border Gateway Protocol XSR#show ip bgp community 400 Local router ID is 1.1.1.4 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? = incomplete Network Next Hop Metric LocPrf Weight Path *> 192.4.4.0/24 192.168.72.1 00 0 100 100 300 ? *> 192.1.1.0/2 ...

  • Enterasys X-Pedition XSR CLI - page 323

    BGP Clear and Show Commands XSR CLI Reference Guide 6-127 Synt ax show ip bgp dampened-paths Mode EXEC  configuration:  XSR> Example The  following  is  sample  output  from  the  command: XSR#show ip bgp dampened-paths Local router ID is 1.1.1.4 Status codes: s suppressed, * valid, > best, i - internal Origin codes ...

  • Enterasys X-Pedition XSR CLI - page 324

    BGP Clear and Show Commands 6-128 Configuring the Border Gateway Protocol show ip bgp inconsistent-as This  command  displays  routes  that  have  incomplete  originating  ASs. Synt ax show ip bgp inconsistent-as Mode EXEC  configuration:  XSR> Example The  following  is  sample  output  from  the ...

  • Enterasys X-Pedition XSR CLI - page 325

    BGP Clear and Show Commands XSR CLI Reference Guide 6-129 Hold time is 90, keepalive interval is 30 seconds Neighbor capabilities: Route Refresh: advertised & recei ved Address family IPv4 Unicast: adve rtised & received Received 11 messages, 1 notificatio ns Sent 10 messages, 1 notifications, 0 in queue Route Refresh request: received 0 s ...

  • Enterasys X-Pedition XSR CLI - page 326

    BGP Clear and Show Commands 6-130 Configuring the Border Gateway Protocol show ip bgp peer-group This  command  displays  information  about  th e  BGP  peer  group  belonging  to  the  router  that  this  command  is  entered  on. Synt ax show ip bgp peer-group [ peer-group-n ame ][ summary ] M ...

  • Enterasys X-Pedition XSR CLI - page 327

    BGP Clear and Show Commands XSR CLI Reference Guide 6-131 Local router ID is 1.1.1.4 Status codes: s suppressed, * valid, > best, i - internal Origin codes: i - IGP, e - EGP, ? = incomplete Network Next Hop Metric LocPrf Weight Path *> 192.4.4.0/24 192.168.72.1 00 0 100 100 300 ? *> 192.1.1.0/24 192.168.72.1 00 0 100 100 300 ? *> 66.6.6 ...

  • Enterasys X-Pedition XSR CLI - page 328

    BGP Debug Commands 6-132 Configuring the Border Gateway Protocol show route-map This  command  displays  configured  route  maps  and  information  about  policy  maps  that  are  referenced. Synt ax show route-map [ map-number ] Mode EXEC  configuration:  XSR> Example The  following  is  sam ...

  • Enterasys X-Pedition XSR CLI - page 329

    BGP Debug Commands XSR CLI Reference Guide 6-133 Synt ax of the “no” Form The  no  form  of  this  command  disables  debugging  output: no debug ip bgp [ events | updates ] Mode EXEC  configuration:  XSR> Default BGP  debugging  is  di sabled. Examples The  following  is  sample  output  ...

  • Enterasys X-Pedition XSR CLI - page 330

    BGP Debug Commands 6-134 Configuring the Border Gateway Protocol Display Parameters show ip traffic This  command  display  BGP  statistics  among  other  IP  data. Synt ax show ip traffic Mode EXEC  configuration:  XSR> Example The  following  sample  outputdisp lays  only  BGP ‐ specific  data: ...

  • Enterasys X-Pedition XSR CLI - page 331

    XSR CLI Reference Guide 7-83 7 Configuring IP Multicast Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  below . IGMP and Generic Multicast Commands The  following  command  sets  define  IP  Multicast  functionality  on  the  XS ...

  • Enterasys X-Pedition XSR CLI - page 332

    Observing Syntax and Conventions 7-84 Configuring IP Multicast Synt ax The  no  form  of  the  command  disables  the  multicast  service: no ip multicast-routing Mode Global  configuration:  XSR(config)# Default Disabled Example In  the  following  example,  multicast  service  is  ena bled  ...

  • Enterasys X-Pedition XSR CLI - page 333

    Observing Syntax and Conventions XSR CLI Reference Guide 7-85 ip igmp join This  command  manua lly  joins  a  multicast  group  to  a  local  interface. Synt ax ip igmp join-group group-address Synt ax of the “no” Form The  no  form  of  this  command  cancels  membership  in  a  grou ...

  • Enterasys X-Pedition XSR CLI - page 334

    Observing Syntax and Conventions 7-86 Configuring IP Multicast ip igmp last-member-query-interval This  command  sets  the  frequency  at  which  IGMP  group ‐ specific  host  query  messages  ar e  sent. Synt ax ip igmp last-member-query-interval interval Synt ax of the “no” Form The  no  form  ...

  • Enterasys X-Pedition XSR CLI - page 335

    Observing Syntax and Conventions XSR CLI Reference Guide 7-87 Example This  example  changes  the  frequency  which  IGMP  host ‐ query  messages  are  sent  to  3  minutes: XSR(config-if<F1>)#ip igmp query-int erval 180 ip igmp query-max-response-time This  command  configures  the  maximu ...

  • Enterasys X-Pedition XSR CLI - page 336

    Observing Syntax and Conventions 7-88 Configuring IP Multicast Mode Interface  configuration:  XSR(config-if<xx>)# Default Tw o  times  the  query  interv al Example The  following  example  sets  the  XSR  to  wa i t  30  seconds  from  the  time  it  received  the  last  q ...

  • Enterasys X-Pedition XSR CLI - page 337

    PIM Commands XSR CLI Reference Guide 7-89 PIM Commands ip pim sp arse-mode This  command  enables  Protocol  Independent  Multicast  (PIM)  Spa rse  Mode  (SM)  on  a  local  interface. Synt ax ip pim sparse-mode Synt ax of the “no” Form The  no  form  of  this  command  disables  PIM ...

  • Enterasys X-Pedition XSR CLI - page 338

    PIM Commands 7-90 Configuring IP Multicast Example The  following  example  sets  interface  F1  as  the  PIM  domain  border: XSR(config-if<F1>)#ip pim bsr-border ip pim bsr-candidate This  command  enables  the  XSR  to  announce  its  candidacy  as  a  BootStrap  Router  ...

  • Enterasys X-Pedition XSR CLI - page 339

    PIM Commands XSR CLI Reference Guide 7-91 ip pim dr-priority This  command  sets  the  priority  for  which  a  router  is  elected  as  the  Designated  Router  (DR). Synt ax ip pim dr-priority priority-value Synt ax of the “no” Form The  no  form  of  this  command  disables  t ...

  • Enterasys X-Pedition XSR CLI - page 340

    PIM Commands 7-92 Configuring IP Multicast Default 60  seconds Example The  following  example  changes  the  PIM ‐ SM  message  interv al  to  120  seconds: XSR(config-if<F1>)#ip pim message-in terval 120 ip pim query-interval This  command  sets  the  frequency  of  Protocol  Independe ...

  • Enterasys X-Pedition XSR CLI - page 341

    PIM Commands XSR CLI Reference Guide 7-93 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  static  RP  configuration: no ip pim rp-address rp-address Mode Global  configuration:  XSR(config)# Example This  example  configures  the  RP  used  by  the  multicast ? ...

  • Enterasys X-Pedition XSR CLI - page 342

    PIM Commands 7-94 Configuring IP Multicast ip pim regcksum wholep acket This  command  changes  the  register  checksum  calculation  to  the  industry  standard. Synt ax ip pim RegCksum wholepacket Synt ax of the “no” Form The  no  command  removes  the  stati c  RP  configuration: no ip pim R ...

  • Enterasys X-Pedition XSR CLI - page 343

    IGMP Clear and Show Commands XSR CLI Reference Guide 7-95 Default The  threshold  is  0 Example The  following  example  sets  the  source  tree  switching  threshold  to  4  kbps: XSR(config)#ip pim spt-threshold 4 IGMP Clear and Show Commands clear ip mroute This  command  deletes  entries  fr ...

  • Enterasys X-Pedition XSR CLI - page 344

    IGMP Clear and Show Commands 7-96 Configuring IP Multicast State: Dynamic Mode: Include Current version: V3 Group IP: 232.1.1.1 Reporter IP: 3.3.3.199 V1MEM exist timer: 0 V2MEM exist timer: 0 Member expire timer: 256 Source IP: 6.6.6.10 (Forward state: YES, Timer:260) Parameters in the Response show ip igmp interface This  command  displays ...

  • Enterasys X-Pedition XSR CLI - page 345

    IGMP Clear and Show Commands XSR CLI Reference Guide 7-97 IGMP state: Enabled Multicast ttl threshold: 0 Current query Interval: 125 Last Member Interval: 1 Querier timeout: 255 Max Response Timeout: 10 Current robust value: 2 Querier IP: 1.1.1.2 (Self) Query sending timer: 124 Group configured: None ---------------------------------- ------------- ...

  • Enterasys X-Pedition XSR CLI - page 346

    IGMP Clear and Show Commands 7-98 Configuring IP Multicast show ip mroute This  command  displays  entries  in  the  IP  multicast  routing  table. Synt ax show ip mroute [][ source-address ][ su mmary ] Mode EXEC  configuration:  XSR> Example The  following  example  displays  sample  responses: X ...

  • Enterasys X-Pedition XSR CLI - page 347

    IGMP Clear and Show Commands XSR CLI Reference Guide 7-99 Parameters in the Response show ip pim bsr This  command  displays  Bootstrap  Router  (BSR)  ver s io n  2  information. Synt ax show ip pim bsr Mode EXEC  configuration:  XSR> Flags Provides  information  about  following  entries: • D ‐? ...

  • Enterasys X-Pedition XSR CLI - page 348

    IGMP Clear and Show Commands 7-100 Configuring IP Multicast Example The  following  example  displays  sample  responses: XSR>#show ip pim bsr PIMv2 Bootstrap information This system is the Elected Bootstrap Router (BSR) BSR address: 192.168.27.1 Uptime: 04:37:46, BSR Priority: 4, Hash mask length: 30 Next bootstrap message in 00: ...

  • Enterasys X-Pedition XSR CLI - page 349

    IGMP Clear and Show Commands XSR CLI Reference Guide 7-101 Parameter Descriptions show ip pim neighbor This  command  displays  discov ered  Protocol  Independent  Multicast  (PIM)  neighbors. Synt ax show ip pim neighbor [ type number ] Mode EXEC  configuration:  XSR> Example The  following  example  shows ...

  • Enterasys X-Pedition XSR CLI - page 350

    IGMP Clear and Show Commands 7-102 Configuring IP Multicast show ip pim rp This  command  displays  the  activ e  rende zvous  points  (RPs)  that  are  cached  with  associated  multicast  routing  entries. Synt ax show ip pim rp [ group-address | mapp ing ] Mode EXEC  configuration:  XSR> Exam ...

  • Enterasys X-Pedition XSR CLI - page 351

    IGMP Clear and Show Commands XSR CLI Reference Guide 7-103 Example The  following  example  displays  sample  responses: XSR>show ip pim rp-hash 239.1.1.1 RP 192.168.27.12 Parameter Descriptions RP Address  of  the  RP  for  the  group  specified  (239.1.1.1). ...

  • Enterasys X-Pedition XSR CLI - page 352

    IGMP Clear and Show Commands 7-104 Configuring IP Multicast ...

  • Enterasys X-Pedition XSR CLI - page 353

    XSR CLI Reference Guide 8-83 8 Configuring the Point-to-Point Protocol Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. PPP Commands This  chapter  defines  Po i n t ‐ to ‐ Po i n t  Protocol  (PPP)  service  ...

  • Enterasys X-Pedition XSR CLI - page 354

    PPP Commands 8-84 Configuring the Point-to-Point Protocol encap sulation ppp This  command  sets  the  Poi n t ‐ to ‐ Po i n t  Protocol  (PPP)  as  the  encapsulation  method  used  by  a  ser ial  port.  To  use  PPP  encapsulation,  the  XSR  must  be  configured  wit ...

  • Enterasys X-Pedition XSR CLI - page 355

    PPP Commands XSR CLI Reference Guide 8-85 Synt ax interface type slot_num card_num por t_num sub-interface_num Slots,  cards,  ports,  and  sub ‐ interfaces  ar e  expressed  as  follows  on  the  CLI: Synt ax of the “no” Form The  no  command  deletes  the  interface: no interface serial port_n ...

  • Enterasys X-Pedition XSR CLI - page 356

    PPP Commands 8-86 Configuring the Point-to-Point Protocol XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#encapsulation p pp XSR(config-if<S1/0>)#no shutdown The  following  example  selects  c hannel  group  12  of  the  T1/E1  port1  on  the  second  NIM  card  so  that  late ...

  • Enterasys X-Pedition XSR CLI - page 357

    PPP Commands XSR CLI Reference Guide 8-87 Synt ax of the “no” Form The  no  form  of  this  command  disable  PPP  authentication: no ppp authentication Default Not  enabled Mode Interface  configuration:  XSR(config-if< xx >)# Example 1 Figure 8 ‐ 1  shows  two  routers,  Site  A  and ...

  • Enterasys X-Pedition XSR CLI - page 358

    PPP Commands 8-88 Configuring the Point-to-Point Protocol Example 2 Figure 8 ‐ 2  shows  two  router s,  Site  A  and  Site  B,  and  only  one  peer  configured  to  do  authentication  (using  chap)  with  only  Site  B  issuing  the  challenge.  The  configuration ...

  • Enterasys X-Pedition XSR CLI - page 359

    PPP Commands XSR CLI Reference Guide 8-89 Synt ax of the “no” Form The  no  form  of  this  command  disables  either  function: no ppp chap { hostname | refuse | password } Mode Interface  configuration:  XSR(config-if< xx >)# Examples The  f ollowing  example  creates  the  alternate  CHAP ...

  • Enterasys X-Pedition XSR CLI - page 360

    PPP Commands 8-90 Configuring the Point-to-Point Protocol Example The  following  example  sets  Serial  interface  1/0  to  have  keepaliv e  configured  at  8 ‐ second  interv als: XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#encapsulation p pp XSR(config-if<S1/0>)#no shutdown XSR(conf ...

  • Enterasys X-Pedition XSR CLI - page 361

    PPP Commands XSR CLI Reference Guide 8-91 Synt ax ppp lcp max-failure number Synt ax of the “no” Form The  no  command  resets  the  counter  to  the  def ault  val u e : no ppp lcp max-failure Default 5 Mode Serial,  Dialer  or  Fast/GigabitEthernet  Su b ‐ interface  configuration:  XSR(config-if ...

  • Enterasys X-Pedition XSR CLI - page 362

    PPP Commands 8-92 Configuring the Point-to-Point Protocol Mode Serial,  Dialer  and  Fast/GigabitEthernet  Sub ‐ interface  configuration:  XSR(con fig-if< xx >)# Example The  following  example  sets  the  terminate ‐ request  counter  at  10  requests  on  Dialer  interface  57 : ...

  • Enterasys X-Pedition XSR CLI - page 363

    PPP Commands XSR CLI Reference Guide 8-93 Synt ax ppp pap sent-username [ username ] pas sword [ password ] Synt ax of the “no” Form Use  the  no  form  of  this  command  to  del ete  the  username  and  password: no pap sent-username Default No  username  or  password Mode Interface  configurati ...

  • Enterasys X-Pedition XSR CLI - page 364

    PPP Commands 8-94 Configuring the Point-to-Point Protocol Synt ax ppp peer default ip address { ip addr ess } Synt ax of the “no” Form Use  the  no  form  of  this  command  to  remov e  the  IP  address: no ppp peer default ip address Mode Interface  configuration:  XSR(config-if< xx >)# Examples Th ...

  • Enterasys X-Pedition XSR CLI - page 365

    PPP Commands XSR CLI Reference Guide 8-95 Synt ax of the “no” Form Use  the  no  form  of  this  command  to  di sable  LQM: no ppp quality Default Disabled Mode Interface  configuration:  XSR(config-if< xx >)# Example The  following  example  enables  LQM  on  Serial  interfac e  2 ...

  • Enterasys X-Pedition XSR CLI - page 366

    PPP Commands 8-96 Configuring the Point-to-Point Protocol XSR(config-if<S1>)#ppp timeout retry 20 username This  command  adds  or  modifies  a  user  who  can  manage  the  XSR. This  command  specifies  the  password  to  be  used  in  the  PPP  Challenge  H andshake  A ...

  • Enterasys X-Pedition XSR CLI - page 367

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-97 Example The  following  example  enables  CHAP  on  serial  interface  1/0  and  defines  a  passw o rd  for  local  server  Bob  and  remote  serve r  John : XSR(config)#hostname Bob XSR(config)#interface serial 1/0 XSR(confi ...

  • Enterasys X-Pedition XSR CLI - page 368

    PPP Debug, Clear and Show Commands 8-98 Configuring the Point-to-Point Protocol XSR#debug ppp packet serial 2/0:0 li mit 10 lcp bacp bap Sample Output The  following  debugging  output  displays  all  PPP  control  packets: May 21, 2003: 13:00:00 Rx 20 bytes L CP CONFIG_REQ: MRU: 1500 Magic Number: 12345678 (0xBC614E) May 21 ...

  • Enterasys X-Pedition XSR CLI - page 369

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-99 Synt ax of the “no” Form The  no  form  of  this  command  removes  PPP  de bugging  on  the  interface: no ppp debug packet Default Limit:  100  packets Mode Interface  configuration:  XSR(config-if<xx>)# Example This  example ...

  • Enterasys X-Pedition XSR CLI - page 370

    PPP Debug, Clear and Show Commands 8-100 Configuring the Point-to-Point Protocol XSR#show ppp interface ********** PPP Stats ********** Serial 1/0:0: PPP is Admin Up / Oper Up / Link Speed: 64000 LCP Current State: OPENED IPCP Current State: OPENED Multilink Current State: OPENED LCP STATS Total Rcv Pck: 0 Total Rcv Control Pck: 0 Total Rcv Data Pc ...

  • Enterasys X-Pedition XSR CLI - page 371

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-101 Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  output  is  displayed  fo r  Serial  and  Multilink  interfaces: XSR#show ppp Serial 1/0 PPP State: LCP State: OPENED IPCP State: OPEN ED Multilink Stat ...

  • Enterasys X-Pedition XSR CLI - page 372

    PPP Debug, Clear and Show Commands 8-102 Configuring the Point-to-Point Protocol Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  output  is  produced  by  this  command: Serial 1/0 is Admin Up / Oper Up Internet address is 25.25.25.3, subn et mask is 255.255.255.0 LCP St ...

  • Enterasys X-Pedition XSR CLI - page 373

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-103 Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  output  display s  with  a  PPP  connection  established  (PPP  quality  has  not  been  enabled  on  the  interface  so  ...

  • Enterasys X-Pedition XSR CLI - page 374

    PPP Debug, Clear and Show Commands 8-104 Configuring the Point-to-Point Protocol Serial 1/0:0 Serial 1/0:3 Serial 1/0:7 Serial 1/0:13 Serial 1/0:10 Serial 1/0:1 Serial 1/0:25 Serial 1/0:11 Serial 1/0:24 Serial 1/0:12 Serial 1/0:5 Serial 1/0:16 Serial 1/0:14 Serial 1/0:29 The  following  displays  output  with  PPP  quality  ena ...

  • Enterasys X-Pedition XSR CLI - page 375

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-105 Quality: good InGoodOctets : 26600 LocalPeriod: 100000 RemotePeriod: 100 000 OutLQRs:1000InLQRs: 1000 LCP Configuration: LCP CONFIGURATION InitialMRU: 1500 MagicNumber: true FcsSize: 16 LQR CONFIGURATION Period: 10 sec Status: Disabled Output Parameters Summary For  PPP  link ? ...

  • Enterasys X-Pedition XSR CLI - page 376

    PPP Debug, Clear and Show Commands 8-106 Configuring the Point-to-Point Protocol RemoteT oLocalProtocolCompression LocalMRU RemoteMRU ReceiveFcsSize T ransmitFcsSize LQR St atus and St atistics This  section  displays  LQR  parameters  display ed  for  the  local  PPP  entity .  Va l u e s  are  display ed  ...

  • Enterasys X-Pedition XSR CLI - page 377

    PPP Debug, Clear and Show Commands XSR CLI Reference Guide 8-107 OutLQRs LCP Configuration This  section  describes  LCP  configuration  data  display ed  for  a  PPP  Link. InitialMRU MagicNumber FcsSize LQR Configuration This  section  describes  LQR  configuration  data  displayed  for  a  ...

  • Enterasys X-Pedition XSR CLI - page 378

    Multilink PPP Commands 8-108 Configuring the Point-to-Point Protocol St atus Multilink PPP Commands interface multilink This  command  names  the  multilink  group  and  creates  a  logic  interface  for  this  multilink  group.  Only  the  PPP  multilink  group  is  supported  curre ...

  • Enterasys X-Pedition XSR CLI - page 379

    Multilink PPP Commands XSR CLI Reference Guide 8-109 XSR(config-if<S1/1>)#multilink-group 2 XSR(config-if<S1/1>)#encapsulation p pp XSR(config-if<S1/1>)#ppp multilink XSR(config-if<S1/1>)#no shutdown multilink max-links This  command  sets  the  maximum  number  of  links  allowed  in  this  ...

  • Enterasys X-Pedition XSR CLI - page 380

    Multilink PPP Commands 8-110 Configuring the Point-to-Point Protocol Default 1 Mode Dialer  Interface  configuration:  XSR(con fig-if< xx >)# Examples The  following  example  sets  the  minimum  multil ink  limit  to  6  on  the  terminating  dialer  interface: XSR(config)#interface dialer 4 ...

  • Enterasys X-Pedition XSR CLI - page 381

    Multilink PPP Commands XSR CLI Reference Guide 8-111 XSR(config-if<D57>)#ppp bap call acc ept ppp bap callback This  command  sets  enables  Bandwidth  Allocation  Protocol  (BAP)  callback  parameters  on  a  dialer  interface  to  set  up  Bandwidth ‐ on ‐ Demand  (BoD).  It  p ...

  • Enterasys X-Pedition XSR CLI - page 382

    Multilink PPP Commands 8-112 Configuring the Point-to-Point Protocol Synt ax ppp bap number { default phone-number } Synt ax of the “no” Form The  no  command  removes  a  BAP  phone  number: no ppp bap number { default phone-number } Mode Dialer  Interface  configuration:  XSR(con fig-if<D x >)# Example The ...

  • Enterasys X-Pedition XSR CLI - page 383

    Multilink PPP Commands XSR CLI Reference Guide 8-113 Example The  following  example  resets  the  BAP  pending  timeout  on  Dialer  port  1: XSR(config)#interface dialer 1 XSR(config-if<D1>)#ppp bap timeout p ending 60 ppp multilink This  command  enables  Multilink  PPP  on  an  XSR  ...

  • Enterasys X-Pedition XSR CLI - page 384

    Multilink PPP Commands 8-114 Configuring the Point-to-Point Protocol Default Disabled Mode Dialer  or  Serial  Interface  configuration:  XSR(config -if<D/S xx >)# Examples The  following  example  configures  a  dialer  for  Multilink  PPP .  It  does  not  show  the  configuration  ...

  • Enterasys X-Pedition XSR CLI - page 385

    Multilink PPP Commands XSR CLI Reference Guide 8-115 Mode Dialer ,  Multilink,  BRI  Interface,  and  Controller  configuration:  XSR(c onfig-if< xx >) and XSR(config-controller<T/E xx >) Default Hostname Example The  following  example  sets  the  PPP  multilink  endpoint  va l u e  over ...

  • Enterasys X-Pedition XSR CLI - page 386

    Multilink PPP Commands 8-116 Configuring the Point-to-Point Protocol entered,  no  maximum  fragment  size  will  be  set  and  the  fragment  size  will  only  be  decided  with  the  load  balance.  Synt ax ppp multilink fragment-delay value Synt ax of the “no” Form The  no  fo ...

  • Enterasys X-Pedition XSR CLI - page 387

    Multilink PPP Commands XSR CLI Reference Guide 8-117 ppp multilink fragment disable This  command  disables  fragmentation  over  a  bundle  PPP  connection,  supporting  Multilink  and  Dialer  interfaces. Synt ax ppp multilink fragment disable Synt ax of the “no” Form The  no  form  of  this ...

  • Enterasys X-Pedition XSR CLI - page 388

    Multilink PPP Commands 8-118 Configuring the Point-to-Point Protocol Group Num: 1 LCP State: OPENED IPCP State: OPENED Multilink State: OPENED Multi-Class State: OPENED Multilink header format is LONG SEQ NUM Class suspendable level is 5 tx clas ses and 5 rcv classes Fragmentation is disabled Bundle Size: 2 Class Level Tx: 5 Rx: 5 Max Load Threshol ...

  • Enterasys X-Pedition XSR CLI - page 389

    Multilink PPP Commands XSR CLI Reference Guide 8-119 Synt ax of the “no” Form The  no  form  of  this  command  removes  the  PP P  multilink  group: no multilink-group Default Disabled  with  no  s pecific  multilink  group  assigned Mode Interface  configuration:  XSR(config-if< xx > ...

  • Enterasys X-Pedition XSR CLI - page 390

    Multilink PPP Commands 8-120 Configuring the Point-to-Point Protocol Synt ax multilink load-threshold number ( 1-2 55 ) Default 255 Mode Dialer  Interface  configuration:  XSR(con fig-if< xx >)# Example The  following  example  sets  the  multilink  PPP  load  threshold  to  250  on  the  termin ...

  • Enterasys X-Pedition XSR CLI - page 391

    Multilink PPP Commands XSR CLI Reference Guide 8-121 Example The  following  example  enables  the  multi ‐ class  MLPPP  option: XSR(config-if<D57>)#ppp multilink mu lti-class ...

  • Enterasys X-Pedition XSR CLI - page 392

    Multilink Show Commands 8-122 Configuring the Point-to-Point Protocol Multilink Show Commands show interface multilink This  command  displays  multil ink  interface  statistics  including  MLPPP  status  for  both  the  bundle  and  the  member  link. Synt ax show interface multilink [ number ] Mode ...

  • Enterasys X-Pedition XSR CLI - page 393

    Multilink Show Commands XSR CLI Reference Guide 8-123 PPP Multilink St atus LCP St ate IPCP St ate Multilink St ate Multi-Class St ate Bundle Size Class Level Tx/Rx Max Load Threshold Bundle Tx/Rx Load A vg No Of Pck in Rx Buf Q Lowest link S peed Range INITIAL/  ST ARTING/  CLOSED/  STOPPED/  CLOSING/  STOPPING/  REQSENT/  ACK ...

  • Enterasys X-Pedition XSR CLI - page 394

    Multilink Show Commands 8-124 Configuring the Point-to-Point Protocol Max Fragment Size High Pri Member link is Serial 1/00 PPP Multilink Bundle St atistics Rx St ats Tx St ats Range Not  defined. Description Ma ximum  fragment  size  ov er  the  member  links. Range Not  defined. Description Hig hest  speed  link  ...

  • Enterasys X-Pedition XSR CLI - page 395

    Multilink Show Commands XSR CLI Reference Guide 8-125 show ppp interface multilink/dialer This  command  displays  PPP  status,  statistics  and  configurat ion  data  for  interfaces  running  PP P . Synt ax show ppp interface [ interface type / n umber ][ option type ] Mode EXEC:  XSR> Sample Output The ? ...

  • Enterasys X-Pedition XSR CLI - page 396

    Multilink Show Commands 8-126 Configuring the Point-to-Point Protocol Invalid Proto: 0 Wrong Proto: 0 Padding Error: 0 Invalid Cls#: 0 Error to CP: 0 No Lower Lyr: 0 No Upper Lyr: 0 Others: 0 Tx Stats Total: 0 Data: 0 Control: 0 Null: 0 Discard: Pck Too Long: 0 No Lower Lyr: 0 EnQueue Full: 0 Others: 0 The  following  is  is  sample  ...

  • Enterasys X-Pedition XSR CLI - page 397

    Multilink Show Commands XSR CLI Reference Guide 8-127 Pck Too Long: 0 Invalid Proto: 0 Wrong Proto: 0 Padding Error: 0 Invalid Cls#: 0 Error to CP: 0 No Lower Lyr: 0 No Upper Lyr: 0 Others: 0 Tx Stats Total: 0 Data: 0 Control: 0 Null: 0 Discard: Pck Too Long: 0 No Lower Lyr: 0 EnQueue Full: 0 Others: 0 Refer  to  the  show interface multil ...

  • Enterasys X-Pedition XSR CLI - page 398

    Multilink Show Commands 8-128 Configuring the Point-to-Point Protocol Max Fragment delay is 10 ms Max Fragment Size is 256 bytes Class 0 1 2 3 4 QoSCls# -1 0 1 2 3 ExpctSeq# 1 1 1 1 1 LastFwdSeq# 0 0 0 0 0 LastM# 0 0 0 0 0 maxFListSize 0 0 0 0 0 FragListSize 0 0 0 0 0 TxSeq# 1 1 1 1 1 TxBufferSize 0 0 0 0 0 Rx Load Average 0 0 0 0 0 Max 0 0 0 0 0 M ...

  • Enterasys X-Pedition XSR CLI - page 399

    Multilink Show Commands XSR CLI Reference Guide 8-129 ExpctSeq# LastFwdSeq# LastM# MaxFListSize FragListSize TxSeq# TxBufferSize Tx/Rx Load A verage/Max/Min Description Equivalent  QoS  class,  • -1: fair class. • 0: low priority class. • 1: normal priority class. • 2: medium priority cla ss. • 3: high priority class. Range ‐ 1 ...

  • Enterasys X-Pedition XSR CLI - page 400

    Multilink Show Commands 8-130 Configuring the Point-to-Point Protocol Rx St ats Tx St ats show ppp interface multilink/dialer memberlink This  command  displays  general  me mber  link  statistics  under  MLPPP  or  specific  member  link  statistics  if  specified. Synt ax show ppp interface multilink & ...

  • Enterasys X-Pedition XSR CLI - page 401

    Multilink Show Commands XSR CLI Reference Guide 8-131 IPCP State: OPENED Multilink State: OPENED Multi-Class State: OPENED Multilink header format is LONG SEQ NUM Class suspendable level is 5 tx clas ses and 5 rcv classes Serial 1/0:0 Tx: Total 0 Discard 0(0/0) Rx: Total 0 Discard 0 PPP Multilink Member Link Paremeter Descriptions The  detail ? ...

  • Enterasys X-Pedition XSR CLI - page 402

    Multilink Show Commands 8-132 Configuring the Point-to-Point Protocol ********** MLPPP Member Link MultiCl assStats ********** Multilink 1: MLPPP is Admin Up / Ope r Up Group Num: 1 LCP State: OPENED IPCP State: OPENED Multilink State: OPENED Multi-Class State: OPENED Multilink header format is LONG SEQ NUM Class suspendable level is 5 tx clas ses ...

  • Enterasys X-Pedition XSR CLI - page 403

    Multilink Show Commands XSR CLI Reference Guide 8-133 Rx St ats Tx St ats show ppp interface dialer x mlpppgroup x bap This  command  displays  BAP  multilink  bundle  statistics  of  a  specific  bundle  under  the  dialer  interface.  Yo u  can  view  individual  multilink  bundles  w ...

  • Enterasys X-Pedition XSR CLI - page 404

    Multilink Show Commands 8-134 Configuring the Point-to-Point Protocol BACP State: OPENED Multilink State: OPENED Multi-Class State: OPENED Multilink header format is LONG SEQ NUM Class suspendable level is 5 tx clas ses and 5 Max Fragment delay is 10 ms Bundle Size: 20 Class Level Tx: 5 Rx: 5 Max Load Threshold: 100 Bundle Tx Load Avg: 0 Bundle Rx ...

  • Enterasys X-Pedition XSR CLI - page 405

    Multilink Show Commands XSR CLI Reference Guide 8-135 Rcv Call-ReqAck: 19 Rcv CallBack-Req: 0 Rcv CallBack-ReqAck: 0 Rcv LinkDrop-Req: 0 Rcv LinkDrop-ReqAck: 0 Tx Call-Req: 20 Tx Call-ReqAck: 0 Tx CallBack-Req: 0 Tx CallBack-ReqAck: 0 Tx LinkDrop-Req: 0 Tx LinkDrop-ReqAck: 0 Discriminators Local Remote Serial 3/2/0:26 0 1 Serial 3/2/0:30 1 3 Serial ...

  • Enterasys X-Pedition XSR CLI - page 406

    Multilink Show Commands 8-136 Configuring the Point-to-Point Protocol ...

  • Enterasys X-Pedition XSR CLI - page 407

    XSR CLI Reference Guide 9-83 9 Configuring Frame Relay Observing Synt ax and Conventions CLI  command  syntax  and  conventions  use  the  notation  described  below . Frame Relay Commands This  chapter  descri bes  the  configurable  features  of  the  Frame  Relay  interface  for  the ...

  • Enterasys X-Pedition XSR CLI - page 408

    Frame Relay Commands 9-84 Configuring Frame Relay Synt ax encapsulation frame-relay Synt ax of the “no” Form Disable  Frame  Relay  encapsulation  on  the  interface  with  the  no  form: no encapsulation frame-relay Mode Interface  configuration:  XSR(config-if< xx >)# Example This  example  sets ...

  • Enterasys X-Pedition XSR CLI - page 409

    Frame Relay Commands XSR CLI Reference Guide 9-85 Synt ax of the “no” Form The  no  form  removes  the  association  of  the  map  class  to  the  interface  or  sub ‐ interface: no frame-relay class name Mode Interface  configuration:  XSR(config-if< xx >)# Example The  following  c ...

  • Enterasys X-Pedition XSR CLI - page 410

    Frame Relay Commands 9-86 Configuring Frame Relay Once  chosen  as  static,  no  inv erse  ARP  will  be  sent  out  by  default.  A  free  inver se  ARP  reque st  (similar  to  above)  can  be  requested  by  this  command. Once  chosen  as  static,  thi s ? ...

  • Enterasys X-Pedition XSR CLI - page 411

    Frame Relay Commands XSR CLI Reference Guide 9-87 Next Mode Frame  Relay  DLCI  configuration:  XSR(config- fr-dlci<xx>)# Examples The  following  example  maps  DLCIs  16  and  18  on  serial  sub ‐ interface  1/0.1  to  the  specified  IP  addresses,  supporting  bootp  ...

  • Enterasys X-Pedition XSR CLI - page 412

    Frame Relay Commands 9-88 Configuring Frame Relay XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#no shutdown XSR(config-if<S1/0>)#encapsulation f rame-relay XSR(config-if<S1/0>)#frame-relay int f-type dte XSR(config-if<S1/0>)#frame-relay lmi -type ansi The  following  example  configures  Serial  interf ...

  • Enterasys X-Pedition XSR CLI - page 413

    Frame Relay Commands XSR CLI Reference Guide 9-89 frame-relay lmi-n391d te This  command  sets  the  full  status ‐ polling  interv al  when  the  Digital  Te r m i n a l  Equipment  (DTE)  interface  is  configured  to  set  the  full  status  message ‐ polling  interval. Synt a ...

  • Enterasys X-Pedition XSR CLI - page 414

    Frame Relay Commands 9-90 Configuring Frame Relay Default 3 Mode Interface  configuration:  XSR(config-if< xx >)# Example This  example  sets  the  LMI  failur e  threshold  to  5  for  the  DCE  devi ce: XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#encapsulation f rame-relay XSR(config ...

  • Enterasys X-Pedition XSR CLI - page 415

    Frame Relay Commands XSR CLI Reference Guide 9-91 frame-relay lmi-t392dce This  command  sets  polling  veri f ic at io n  timer  on  a  Data  Communications  Equipment  (DCE)  interface.  The  timer  marks  the  duration  that  the  DCE  expects  to  receive  a  Status  ...

  • Enterasys X-Pedition XSR CLI - page 416

    Frame Relay Commands 9-92 Configuring Frame Relay Mode Interface  configuration:  XSR(config-if< xx >)# Example This  example  sets  the  LMI  failur e  threshold  to  5  for  the  DCE  devi ce: XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#encapsulation f rame-relay XSR(config-if<S1/ ...

  • Enterasys X-Pedition XSR CLI - page 417

    Frame Relay Commands XSR CLI Reference Guide 9-93 frame-relay lmi-type This  command  configures  the  Local  Management  Interface  (LMI)  type  on  a  per ‐ interface  basis. Synt ax frame-relay lmi-type { ilmi | ansi | q933a | auto | none } Synt ax of the “no” Form Use  the  no  command  to ? ...

  • Enterasys X-Pedition XSR CLI - page 418

    Frame Relay Commands 9-94 Configuring Frame Relay Synt ax of the “no” Form The  no  command  disables  the  use  of  map ‐ class  parameters: no frame-relay traffic-shaping Default Disable Mode Interface  configuration:  XSR(config-if< xx >)# Example This  example  enables  both  traffic  sha ...

  • Enterasys X-Pedition XSR CLI - page 419

    Frame Relay Map Class Commands XSR CLI Reference Guide 9-95 Synt ax of the “no” Form The  no  command  deletes  the  interface: no interface serial port_num interface_num Mode Global  configuration:  XSR(config)# Examples This  example  selects  interface  serial  1/0  and  sets  Frame  Relay  ...

  • Enterasys X-Pedition XSR CLI - page 420

    Frame Relay Map Class Commands 9-96 Configuring Frame Relay Mode Vi rt u a l  Circuit  configuration:  XSR(config -fr-dlci)# Example The  first  three  commands  in  the  following  example  set  up  Serial  sub ‐ interface  1/0.1  with  associated  DLCI  16 .  The  last  two  c ...

  • Enterasys X-Pedition XSR CLI - page 421

    Frame Relay Map Class Commands XSR CLI Reference Guide 9-97 Synt ax frame-relay bc out bits Synt ax of the “no” Form The  no  command  resets  the  committed  burst  size  to  its  default  valu e : no frame-relay bc out Mode Map  Class  configuration:  XSR(config-map-class)# Default 7000  bits Examp ...

  • Enterasys X-Pedition XSR CLI - page 422

    Frame Relay Map Class Commands 9-98 Configuring Frame Relay Example This  example  adds  map  class  slowlink  with  Be  of  10000  and  Bc  of  6000  bits: XSR(config)#map-class frame-relay sl owlink XSR(config-map-class<slowlink>)#fram e-relay be out 10000 XSR(config-map-class<slowlink>)#fram ...

  • Enterasys X-Pedition XSR CLI - page 423

    Frame Relay Map Class Commands XSR CLI Reference Guide 9-99 frame-relay fragment This  command  specifies  the  FRF .12  end ‐ to ‐ end  fragment  si ze  for  a  Frame  Relay  map ‐ class.  Fragment  size  is  defined  in  bytes.  It  specifies  the  number  of  payload ? ...

  • Enterasys X-Pedition XSR CLI - page 424

    Frame Relay Map Class Commands 9-100 Configuring Frame Relay Synt ax of the “no” Form no map-class [ frame-relay | dialer ] map-class-name Mode Global  configuration:  XSR(config)# Next Mode FR  Map ‐ Class  configuration:  XSR(config-map-class)# Example This  example  defines  frame  relay  map ‐ class  nor ...

  • Enterasys X-Pedition XSR CLI - page 425

    Frame Relay Map Class Commands XSR CLI Reference Guide 9-101 Example The  following  example  specifies  HighPriori ty  as  the  policy  for  the  class  map: XSR(config-map-class)#service-policy out HighPriority shut down This  command  disables  an  interface  or  sub ‐ interface.  A  sub ...

  • Enterasys X-Pedition XSR CLI - page 426

    Frame Relay Clear and Show Commands 9-102 Configuring Frame Relay Examples This  example  selects  sub ‐ interface  Serial  1/0.5  on  a  serial  interface: XSR(config)#interface serial 1/0 XSR(config-if<S1/0>)#encapsulation f rame-relay XSR(config-if<S1/0>)#no shutdown XSR(config-if<S1/0>)#interface s ...

  • Enterasys X-Pedition XSR CLI - page 427

    Frame Relay Clear and Show Commands XSR CLI Reference Guide 9-103 Mode EXEC:  XSR> Examples The  following  example  clears  all  Frame  Relay  Inve rse  ARP  entries: XSR(config)#clear frame-relay inarp This  example  clears  all  Frame  Relay  Inv erse  ARP  entries  for  Interface ? ...

  • Enterasys X-Pedition XSR CLI - page 428

    Frame Relay Clear and Show Commands 9-104 Configuring Frame Relay XSR(config)#show frame-relay fragmen t interface serial 2/0.1 960 Frame Relay End-to-End Fragmentation Detailed Statistics Serial 2/0.1 DLCI = 960 Fragment Size = 53 Incoming Traffic Outgoing Traffic Fragmented pkts = 0 Fragmented pkts = 0 Fragmented bytes = 0 Fragmented bytes = 0 As ...

  • Enterasys X-Pedition XSR CLI - page 429

    Frame Relay Clear and Show Commands XSR CLI Reference Guide 9-105 show frame-relay lmi This  command  displays  Local  Management  Interface  (LMI)  st atistics.  Enter  the  command  without  arguments  to  obtain  statistics  about  all  Frame  Relay  interfaces. Synt ax show frame-relay ...

  • Enterasys X-Pedition XSR CLI - page 430

    Frame Relay Clear and Show Commands 9-106 Configuring Frame Relay Parameter Descriptions show frame-relay map This  command  displays  data  from  current  fr ame ‐ relay  map  entries. Synt ax show frame-relay map Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following ? ...

  • Enterasys X-Pedition XSR CLI - page 431

    Frame Relay Clear and Show Commands XSR CLI Reference Guide 9-107 The  following  example  displays  a  point ‐ to ‐ point  Frame  Relay  map: XSR#show frame-relay map Frame Relay Map Statistics (Serial 2 /0) Serial 2/0.3 dlci 981 (0x3D5, 0x F450) Remote Addr. P2P, gratuitous-inverse-arp, bootp, static ip 2.2.2.3 Paramet ...

  • Enterasys X-Pedition XSR CLI - page 432

    Frame Relay Clear and Show Commands 9-108 Configuring Frame Relay PVC Statistics for Serial 2/0:1.1 (F rame Relay DTE) LMI = NONE DLCI = 16 PVC Status = UP INPUT: Pkt/Sec = 0 Packets = 17941 Bytes = 20018904 Drop Pkts = 0 BECN pkts = 0 FECN pkts = 0 DE pkts = 0 OUTPUT: Pkt/Sec = 2 Packets = 17942 Bytes = 20018904 Drop Pkts = 0 BECN pkts = 0 FECN pk ...

  • Enterasys X-Pedition XSR CLI - page 433

    Frame Relay Clear and Show Commands XSR CLI Reference Guide 9-109 show frame-relay traffic This  command  displays  global  Frame  Relay  statistics  since  the  last  reload. Synt ax show frame-relay traffic Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output XSR#show frame-relay ...

  • Enterasys X-Pedition XSR CLI - page 434

    Frame Relay Clear and Show Commands 9-110 Configuring Frame Relay Serial 1/0, CIR= 64000, Bc=8000, B E= 9000, fragment=53 Adaptive Shaping: Disabled, Servic e Policy: Voice # FR Ports = 1, # FR sub-Interfaces = 3, # DLCIs = 7 show interface serial The  following  statistics  are  added  to  the  command  if  the  port ...

  • Enterasys X-Pedition XSR CLI - page 435

    Frame Relay Clear and Show Commands XSR CLI Reference Guide 9-111 The card is 2. The channel is 0. The current MTU is 1506. The device is in polling mode, and i s active. The last driver error is (null). The physical-layer is HDLC-SYNC, the TX, RX clock source is external. The device uses CRC-16 for Tx. The device uses CRC-16 for Rx. The type of en ...

  • Enterasys X-Pedition XSR CLI - page 436

    Frame Relay Clear and Show Commands 9-112 Configuring Frame Relay ...

  • Enterasys X-Pedition XSR CLI - page 437

    XSR CLI Reference Guide 10-83 10 Configuring the Dialer Interface This  chapter  descri bes  commands  for  the  dialer ,  dial er  backup,  and  Dial ‐ on ‐ Demand/Bandwidth ‐ on ‐ Demand  services. Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the ...

  • Enterasys X-Pedition XSR CLI - page 438

    Dialer Interface Commands 10-84 Configuring the Dialer Interface •T h e  dialer string  command  must  be  set  to  the  dialer  interface  that  owns  the  dialer  pool  where  the  dialer  DTR  serial  interface  is  added. •T h e  serial  interface  must  be  co ...

  • Enterasys X-Pedition XSR CLI - page 439

    Dialer Interface Commands XSR CLI Reference Guide 10-85 Mode Interface  configuration:  XSR(config-if< xx >)# Example The  following  example  shows  dialer  interface  0  assigned  to  dialer  pool  6. XSR(config)#interface dialer 0 XSR(config-if<D1>)#dialer pool 6 XSR(config-if<D1>)#no shut ...

  • Enterasys X-Pedition XSR CLI - page 440

    Dialer Interface Commands 10-86 Configuring the Dialer Interface dialer string This  command  creates  a  string  used  to  place  a  call  a  destination  or  subnet.  Ty p i c a l l y ,  it  is  the  telephone  number  needed  for  dialing. Synt ax dialer string dial-string [ class ...

  • Enterasys X-Pedition XSR CLI - page 441

    Dialer Interface Commands XSR CLI Reference Guide 10-87 Example The  following  example  specifies  a  wai t  time  of  90  seconds  for  the  carrier  signal  on  serial  port  1/0: XSR(config-if<S1/0>)#dialer wait-for-carrier -time 90 dialer wait-for-carrier-time (m ap-class dialer configur ...

  • Enterasys X-Pedition XSR CLI - page 442

    Dialer Interface Commands 10-88 Configuring the Dialer Interface This  mode  of  operation  of  the  dial er  interface  is  called  spoofing  and  it  is  the  default  mode  for  this  interface.  Spoofing  mode  changes  to  non ‐ spoofing  mode  when  the  f o ...

  • Enterasys X-Pedition XSR CLI - page 443

    Dialer Interface Commands XSR CLI Reference Guide 10-89 XSR(config-if<D3>)#dialer-group 7 XSR(config-if<D3>)#access-list 101 permit ip 0.0.0.0 255.255.255.255 255.255.255.255 0.0.0.0 XSR(config)#dialer-list 7 protocol i p list 101 map-class dialer This  command  defines  the  dial  string ʹ s  characteristics  and ...

  • Enterasys X-Pedition XSR CLI - page 444

    Dialer Interface Clear and Show Commands 10-90 Configuring the Dialer Interface Synt ax of the “no” Form The  no  form  of  this  command  removes  the  modem ‐ ini t ‐ string: no modem-init-string Mode Map ‐ Class  Dialer  configuration:  XSR(config-map-c lass< xx >)# Example The  foll owing  ...

  • Enterasys X-Pedition XSR CLI - page 445

    Dialer Interface Clear and Show Commands XSR CLI Reference Guide 10-91 Example XSR#show dialer 1 Sample Output The  following  is  sample  output  from  the  show dialer command  for  a  dial er  interface: #show dialer 5 Dialer5 Dialer state is: UP Wait for carrier default: 60, defaul t retry: 3 Dial String Success ...

  • Enterasys X-Pedition XSR CLI - page 446

    Dialer Interface Clear and Show Commands 10-92 Configuring the Dialer Interface Phone numbers: <2400:12> Connection speed/type: <64k>/<On De mand> Dialer maps configured on Interface <Dialer2>: Next hop IP address: <20.20.20.2> Phone numbers: <2400> Connection speed/type: <not set>/<O n Demand> show d ...

  • Enterasys X-Pedition XSR CLI - page 447

    Dial Backup Commands XSR CLI Reference Guide 10-93 Dial Backup Commands The  following  set  of  commands  defines  a  backup  dial  line. backup This  command  set  backup  functionality  on  Serial,  Ethernet  or  sub ‐ interfaces.  Yo u  can  also  specify  a  delay  be ...

  • Enterasys X-Pedition XSR CLI - page 448

    Dial Backup Commands 10-94 Configuring the Dialer Interface backup interface dialer This  command  designates  a  Serial  or  Fast/GigabitEthernet/GigabitEthernet  int erface  or  sub ‐ interface  as  a  backup  dialer  interface. Synt ax backup interface dialer number Synt ax of the “no” Form no back ...

  • Enterasys X-Pedition XSR CLI - page 449

    Dial Backup Commands XSR CLI Reference Guide 10-95 XSR(config)#interface fastethernet 2 XSR(config-if<F2>)#no shutdown XSR(config)#interface fastethernet 2 .1 XSR(config-if>)#backup interface dia ler 57 XSR(config-if>)#encapsulation ppp XSR(config-if>)#ip address negotiate d XSR(config-if>)#ip mtu 1492 XSR(config-if>)#no shutdo ...

  • Enterasys X-Pedition XSR CLI - page 450

    DOD/BOD Commands 10-96 Configuring the Dialer Interface show interface dialer This  command  displays  general  information  for  a  dialer  interface. Synt ax show interface dialer number Mode Privileged  EXEC:  XSR# Sample Output The  example  below  displays  output  from  the  show interface di ...

  • Enterasys X-Pedition XSR CLI - page 451

    DOD/BOD Commands XSR CLI Reference Guide 10-97 Synt ax dialer-group group-number Synt ax of the ‘no’ Form Use  the  no  form  of  this  command  to  remov e  an  interface  from  the  specified  di aler  access  group: no dialer-group Mode Dialer  Interface  configuration:  XSR(con fig-if ...

  • Enterasys X-Pedition XSR CLI - page 452

    DOD/BOD Commands 10-98 Configuring the Dialer Interface Example The  following  example  maps  ACL  1350  to  dialer  li st  57: XSR(config) #access-list 57 permit ip 0.0.0.0 255.2 55.255.255 25 5.255.255.25 5 0.0.0.0 XSR(config)#dialer-list 57 protocol ip list 1350 dialer called This  command  maps  incomi ng ? ...

  • Enterasys X-Pedition XSR CLI - page 453

    DOD/BOD Commands XSR CLI Reference Guide 10-99 Synt ax of the “no” Form The  no  form  of  this  command  disables  the  feature: no dialer caller number Mode Dialer  Interface  configuration:  XSR(con fig-if<D x >)# Example The  following  example  configures  the  dialer  caller  num ...

  • Enterasys X-Pedition XSR CLI - page 454

    DOD/BOD Commands 10-100 Configuring the Dia ler Interface XSR(config)#interface dialer 1 XSR(config-if<D1>)#dialer idle-timeo ut 300 The  following  example  disables  the  idle ‐ timeout: XSR(config-if<D1>)#dialer idle-timeo ut 0 dialer map This  command  configures  a  Dialer  or  Integrated  Serv ...

  • Enterasys X-Pedition XSR CLI - page 455

    DOD/BOD Commands XSR CLI Reference Guide 10-101 Example The  following  example  configures  a  next  hop  IP  address,  SPC,  hostname  and  line  speed  for  map  class  AcmeMap : XSR(config)#dialer map 1 XSR(config-if<D 1 >)#dialer map ip 192 .168.57.9 class AcmeMap name AcmeHost spc speed ...

  • Enterasys X-Pedition XSR CLI - page 456

    DOD/BOD Commands 10-102 Configuring the Dia ler Interface Mode Interface  configuration:  XSR(config-if< xx >)# Default s •A t t e m p t :  1  (no  redial) •I n t e r v a l :  10  seconds •R e ‐ enable:  5  seconds Example Assuming  you  have  configured  Serial  interfaces  1/0 ,  1/1, ...

  • Enterasys X-Pedition XSR CLI - page 457

    Dialer Watch Commands XSR CLI Reference Guide 10-103 Dialer W a tch Commands dialer watch-group This  command  enables  Dialer  Wa t c h  backup  on  a  dial er  interface  with  up  to  16  wat c h ‐ groups. Synt ax dialer watch-group group-number Synt ax of the “no” Form Use  the  no  form ...

  • Enterasys X-Pedition XSR CLI - page 458

    Dialer Watch Commands 10-104 Configuring the Dia ler Interface Synt ax of the “no” Form Use  the  no  form  of  this  command  to  di sable  this  feature: no dialer watch-list group-number [ delay route-check initial initial-delay ][ delay connect connect-delay ][ delay disconn ect disconnect-delay ][ ip ip-addres ...

  • Enterasys X-Pedition XSR CLI - page 459

    Dialer Watch Commands XSR CLI Reference Guide 10-105 dial string: 3200, success: 0, fail : 0 Dialer pool 1 stats: member: Serial 1/3:0, available B-channels: 30, serial p orts: 0 Watch-group stats: watch-group 1, rt cnt 1, trigg cnt 1, state is UP, delays: init 10, connect 3, discon nect 3, time range 10:15 11:15 timer expires in 18h:32m:28s watch- ...

  • Enterasys X-Pedition XSR CLI - page 460

    Dialer Watch Commands 10-106 Configuring the Dia ler Interface ...

  • Enterasys X-Pedition XSR CLI - page 461

    Book Title goes here 11-83 11 ISDN BRI and PRI Commands Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. ISDN Commands The  following  set  of  commands  allows  you  to  configure  BRI/PRI  functionalit ...

  • Enterasys X-Pedition XSR CLI - page 462

    ISDN Commands 11-84 ISDN BRI and PRI Commands Synt ax of the “no” Form no interface bri board/slot Mode Global  configuration:  XSR(config)# Next Mode BRI  Interface  configuration:  XSR(config- if<BRI- xx >)# Example The  following  example  acquires  BRI  B ‐ channel  1  interface  mode: XSR(conf ...

  • Enterasys X-Pedition XSR CLI - page 463

    ISDN Commands Book Title goes here 11-85 Synt ax of the “no” Form Use  the  no  form  of  this  command  to  remov e  the  ve r if ic a ti on  request: no isdn answer1 [ called-party-number ][ :subaddress ] Default No  ver i fi ca t io n  of  either  number Mode BRI  Interface  configuration: ? ...

  • Enterasys X-Pedition XSR CLI - page 464

    ISDN Commands 11-86 ISDN BRI and PRI Commands Example The  following  example  sets  the  T1  controller  to  make  call  selections  in  ascending  order: XSR(config)#controller t1 1/0/0 XSR(config-controller<T1-1/0:0>)#des cription “T1 at Acme” XSR(config-controller<T1-1/0:0>)#fra ming esf XS ...

  • Enterasys X-Pedition XSR CLI - page 465

    ISDN Commands Book Title goes here 11-87 A  PRI  or  BRI  port  can  hav e  only  one  ISDN  calling ‐ number  entry .  For  ISDN  PRI,  this  command  is  intended  for  us e  when  the  network  offers  better  pricing  on  calls  in  which  devi ces ? ...

  • Enterasys X-Pedition XSR CLI - page 466

    ISDN Commands 11-88 ISDN BRI and PRI Commands Example The  following  example  sets  up  a  test  call  on  channel  24  on  BRI  port  1/1: XSR#isdn disconnect 1/1 24 <186>Jul 28 22:49:51 10.10.10.20 ISD N: No Channel Available For Test Call isdn spid1, isdn spid2 (BRI) This  command  specifies ...

  • Enterasys X-Pedition XSR CLI - page 467

    ISDN Commands Book Title goes here 11-89 Synt ax isdn switch-type switch-type { basic-dms100 | basic-ni1 | basic-ntt | basic-net3 | primary-net5 | primary-ni2 | primary-5ess | primary- dms100 | primary-ntt } BRI Switch T ypes: PRI Switch T ypes: Synt ax of the “no” Form The  no  form  of  this  command  deletes  the  thr ...

  • Enterasys X-Pedition XSR CLI - page 468

    ISDN Commands 11-90 ISDN BRI and PRI Commands Example The  following  example  selects  a  switch  typ e  on  the  BRI  1/1  interface: XSR(config)#interface bri 1/1 XSR(config-if<BRI-1/1>)#isdn switch- type basic-net3 leased-line bri This  command  sets  up  an  ISDN  BRI  port  for ? ...

  • Enterasys X-Pedition XSR CLI - page 469

    ISDN Commands Book Title goes here 11-91 Examples The  following  example  configures  two  data  streams  on  leas ed ‐ line  BRI  interface  1/1  at  56  kbps  with  PPP  encapsulation: XSR(config)#interface bri 1/1 XSR(config-if<BRI-1/1>)#leased-line 56 XSR(config)#interface bri 1/1:1 XS ...

  • Enterasys X-Pedition XSR CLI - page 470

    ISDN Debug and Show Commands 11-92 ISDN BRI and PRI Commands shut down (BRI) This  command  forces  all  data  calls  to  be  disconnected  and  signals  all  intern al  XSR  resources  that  the  port  is  not  available. Synt ax shutdown [ board / slot / port ] Synt ax of the “no” Fo ...

  • Enterasys X-Pedition XSR CLI - page 471

    ISDN Debug and Show Commands Book Title goes here 11-93 Synt ax of the “no” Form The  no  form  of  this  command  removes  ISDN  message  tracing.  Yo u  may  choose  to  issue  the  command  with  all  or  no  parameters  selected. no  debug  isdn  slot / card / por t ...

  • Enterasys X-Pedition XSR CLI - page 472

    ISDN Debug and Show Commands 11-94 ISDN BRI and PRI Commands Packet Processor Tx Scheduler Stats: 0 Packet driver Tx OK 0 Packet driver not Tx: MUX END_ERR_BLOCK 0 Packet driver not Tx: MUX ERROR 0 Packet driver not Tx: Unkn own Msg from MUX The unit number is 167772177. The interrupt number is 27. General: SCC 4 parm ram = 0xa0290f00 , reg = 0xa02 ...

  • Enterasys X-Pedition XSR CLI - page 473

    ISDN Debug and Show Commands Book Title goes here 11-95 •P R I ‐ show interface serial 2/1:0 - 14 ,  16-30  for  E1  B  channels Use  the  following  table  for  refere nce. Synt ax (PRI) show interface bri [ card / port ]:[ chan nel number ] Synt ax (BRI) show interface bri [ card / port ]:[ chan nel number ...

  • Enterasys X-Pedition XSR CLI - page 474

    ISDN Debug and Show Commands 11-96 ISDN BRI and PRI Commands Standard  output  of  the  command  follows  but  is  not  displayed  here. The  following  output  is  displayed  fo r  the  BRI  interface  2/1: XSR#sh interface bri 2/1 ********** Serial Interface Stats ********** D-Serial 2/1:0 ...

  • Enterasys X-Pedition XSR CLI - page 475

    ISDN Debug and Show Commands Book Title goes here 11-97 show isdn history This  command  displays  past  ISDN  actions  on  the  XSR. Synt ax show isdn history [ board / slot / port ] Mode Privileged  EXEC  or  Global  configuration:  XSR# or  XSR(config)# Sample Output The  following  output  disp ...

  • Enterasys X-Pedition XSR CLI - page 476

    ISDN Debug and Show Commands 11-98 ISDN BRI and PRI Commands show isdn active This  command  displays  current  call  information  of  all  BRI  or  PRI  ports,  or  only  the  selected  port  specified  by  board/slot/port  identifier . Synt ax show isdn active [ board / slot / port ] Mod ...

  • Enterasys X-Pedition XSR CLI - page 477

    ISDN Debug and Show Commands Book Title goes here 11-99 show isdn service This  command  displays  the  service  status  of  all  or  selected  ISDN  ports . Synt ax show isdn service [ board / slot / port ] Mode Privileged  EXEC  or  Global  configuration:  XSR# or  XSR(config)# Parameter Descript ...

  • Enterasys X-Pedition XSR CLI - page 478

    ISDN Debug and Show Commands 11-100 ISDN BRI and PRI Commands 20 CONNECTED 21 CONNECTED 22 CON NECTED 23 CONNECTED 24 CONNEC TED 25 CONNECTED 26 CONNECTED 27 CON NECTED 28 CONNECTED 29 CONNEC TED 30 CONNECTED ...

  • Enterasys X-Pedition XSR CLI - page 479

    XSR CLI Reference Guide 12-83 12 Configuring Quality of Service Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. QoS Commands The  following  set  of  commands  configure  Quality  of  Service  (QoS)  va ...

  • Enterasys X-Pedition XSR CLI - page 480

    Policy-Map Commands 12-84 Configuring Quality of Service service-policy This  command  attaches  a  policy  map  to  an  output  or  input  interface.  Yo u  can  attach  a  single  policy  map  to  one  or  more  interfaces. Synt ax service-policy [ input | output ] poli cy-map-n ...

  • Enterasys X-Pedition XSR CLI - page 481

    Policy-Map Commands XSR CLI Reference Guide 12-85 • random-detect exponential-weighting- constant ‐ Configures  the  WRED  exponential  wei gh t  fact or  for  the  av erage  queue  size  calculation.Refer  to  page  12 ‐ 95  for  the  command  definition. • random-detect precedenc ...

  • Enterasys X-Pedition XSR CLI - page 482

    Policy-Map Commands 12-86 Configuring Quality of Service Example These  commands  create  class ‐ map  class1  and  define  its  match  criteria: XSR(config)#class-map class1 XSR(config-cmap<class1>)#match acces s-group 136 These  commands  create  the  policy  map  which  is  defined  t ...

  • Enterasys X-Pedition XSR CLI - page 483

    Policy-Map Commands XSR CLI Reference Guide 12-87 Synt ax of the “no” Form Remove  the  bandwidth  sp ecified  for  a  class  by  using  the  no  for m  of  this  command: no bandwidth Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c< xx> )# Example The  following  ...

  • Enterasys X-Pedition XSR CLI - page 484

    Policy-Map Commands 12-88 Configuring Quality of Service Synt ax of the “no” Form The  no  form  of  this  command  removes  a  class  from  the  policy  map: no class { class-name } Mode Po l i c y ‐ Map  configuration:  XSR(config-pmap< xx> )# Next Mode Po l i c y ‐ Map  Class  configu ...

  • Enterasys X-Pedition XSR CLI - page 485

    Policy-Map Commands XSR CLI Reference Guide 12-89 police This  command  configures  traffic  policing. Synt ax police bps [ burst-normal ][ burst-max ][ conform-action action ][ exceed-action action ][ violate-action action ] Synt ax of the “no” Form T raffic  policing  is  remo ved  by  using  the  no  form ...

  • Enterasys X-Pedition XSR CLI - page 486

    Policy-Map Commands 12-90 Configuring Quality of Service Example The  following  example  defines  a  traffic  class  using  the  class-map command  and  match  criteria  from  the  traffic  class  with  the  T raffic  Po l ic i n g  configurat ion,  which  is  configured  i ...

  • Enterasys X-Pedition XSR CLI - page 487

    Policy-Map Commands XSR CLI Reference Guide 12-91 Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c-< xx> )# Example The  following  example  configures  two  PQs  fo r  the  policy  map  policy57 ,  with  a  high  priority  lev el ,  guaranteed  bandwidth  of  ...

  • Enterasys X-Pedition XSR CLI - page 488

    Policy-Map Commands 12-92 Configuring Quality of Service XSR(config)#policy-map policy75 XSR(config-pmap<policy75>)#class acl 203 XSR(config-pmap-c<acl203>)#bandwidth percent 35 XSR(config-pmap-c<acl203>)#queue-lim it 50 random-detect (RED) This  command  configures  RED  for  a  policy  map. This  command ...

  • Enterasys X-Pedition XSR CLI - page 489

    Policy-Map Commands XSR CLI Reference Guide 12-93 random-detect (WRED) This  command  configures  and  enables  We i g h t e d  Random  Early  Detect  (WRED)  for  the  class.  WRED  is  a  congestion  avoidance  mechan ism  that  slows  traffic  by  randomly  dropping  pack ...

  • Enterasys X-Pedition XSR CLI - page 490

    Policy-Map Commands 12-94 Configuring Quality of Service Synt ax random-detect dscp dscp-value min-th res max-thres [ mark-prob ] Synt ax of the “no” Form The  no  form  reverts  WRED  parameters  to  the  default  for  a  DSCP  va l u e : no random-detect Mode Po l i c y ‐ Map  Class  configuration: ...

  • Enterasys X-Pedition XSR CLI - page 491

    Policy-Map Commands XSR CLI Reference Guide 12-95 Examples The  following  example  enables  WRED  with  a  minimum  threshold  for  DSCP  af21  of  24  and  maximum  threshold  of  40 .  The  dropping  probability  is  1/4th .  All  other  DSCPs  hav e  default  ...

  • Enterasys X-Pedition XSR CLI - page 492

    Policy-Map Commands 12-96 Configuring Quality of Service Synt ax of the “no” Form The  no  form  of  this  command  sets  the  constant  to  the  default  va l u e  of  9: no random-detect exponential-weighting-constant Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c-< xx&g ...

  • Enterasys X-Pedition XSR CLI - page 493

    Policy-Map Commands XSR CLI Reference Guide 12-97 Default s • Disabled •M a r k ‐ prob:  10 Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c-< xx> )# Examples The  following  example  enables  WR ED  with  a  minimum  IP  precedence  threshold  of  24  and  maximum ? ...

  • Enterasys X-Pedition XSR CLI - page 494

    Policy-Map Commands 12-98 Configuring Quality of Service Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c-< xx> )# Example The  following  example  configures  policy ‐ map  setCosT o4  that  matches  input  priority  val u e  range  from  5  to  7  and  sets  t ...

  • Enterasys X-Pedition XSR CLI - page 495

    Policy-Map Commands XSR CLI Reference Guide 12-99 Synt ax of the “no” Form The  no  form  of  this  command  removes  a  previously  set  IP  DSCP: no set ip dscp Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c- xx )# Example In  the  following  example,  the  IP  DSC ...

  • Enterasys X-Pedition XSR CLI - page 496

    Policy-Map Commands 12-100 Configuring Quality of Service Mode Po l i c y ‐ Map  Class  configuration:  XSR(config-pmap-c- xx )# Example The  following  example  sets  the  IP  Precedence  bit  to  7  for  packets  that  satisfy  the  match  criteria  of  the  class  map  cal ...

  • Enterasys X-Pedition XSR CLI - page 497

    Class-map Commands XSR CLI Reference Guide 12-101 Class-map Commands class-map This  command  creates  a  class  map  for  matching  packets  to  a  specified  class.  Use  it  to  specify  the  name  of  the  class  for  which  you  wa n t  to  create  or  modif ...

  • Enterasys X-Pedition XSR CLI - page 498

    Class-map Commands 12-102 Configuring Quality of Service XSR(config)#class-map class57 XSR(config-cmap<class57>)#match acce ss-group 136 XSR(config)#policy-map policy99 XSR(config-pmap<policy99>)#class cla ss57 XSR(config-pmap-c<class57>)#bandwidt h percent 10 XSR(config-pmap-c<class57>)#queue-li mit 40 XSR(config-pmap<po ...

  • Enterasys X-Pedition XSR CLI - page 499

    Class-map Commands XSR CLI Reference Guide 12-103 match cos This  command  identifies  a  specific  IEEE  802.1  priority  va l ue  as  a  match  criterion.  Up  to  8  priority  va l u e s  can  be  matched  in  one  match  statement.  For  example,  if  you  wa ...

  • Enterasys X-Pedition XSR CLI - page 500

    Class-map Commands 12-104 Configuring Quality of Service Synt ax match ip dscp ip-dscp-value [ ip-dscp -value ][ ip-dscp-value ] [ ip-dscp-value ] [ ip- dscp-value ][ ip-dscp-value ][ ip-dscp-value ][ ip-dscp-va lue ] Synt ax of the “no” Form To  remove  a  specif ic  IP  DSCP  va l u e  from  a  class  map,  us ...

  • Enterasys X-Pedition XSR CLI - page 501

    QoS Show Commands XSR CLI Reference Guide 12-105 Synt ax of the “no” Form Use  the  no  form  of  this  command  to  remov e  IP  precedence  va l ue s  from  a  class  map: no match ip precedence ip-precedence -value [ ip-precedence-value ] [ ip-preceden ce- value ][ ip-precedence-value ][ ip-prece ...

  • Enterasys X-Pedition XSR CLI - page 502

    QoS Show Commands 12-106 Configuring Quality of Service Class map c3 Match access-group 103 Class map c2 Match ip precedence 2 Class map c1 Match ip dscp 32 show policy-map This  command  displays  the  configur ation  of  all  classes  for  a  specified  se rvice  policy  map  or  all  classes  fo ...

  • Enterasys X-Pedition XSR CLI - page 503

    QoS Show Commands XSR CLI Reference Guide 12-107 show policy-map interface This  command  shows  the  configuration  of  all  service  policies  applied  on  an  interface  or  Frame  Relay  Data ‐ link  Connection  Identifier  (DLCI) .  It  displays  the  configuration  for ...

  • Enterasys X-Pedition XSR CLI - page 504

    QoS Show Commands 12-108 Configuring Quality of Service XSR(config)#map-class frame-relay fo o XSR(config-map-class<foo>)#frame-rel ay cir out 100000 XSR(config-map-class<foo>)#frame-rel ay bc out 10000 XSR(config-map-class<foo>)#service-p olicy output mypolicy XSR(config-map-class<foo>)#service p olicy input mypolicy XSR#sh ...

  • Enterasys X-Pedition XSR CLI - page 505

    QoS Show Commands XSR CLI Reference Guide 12-109 show random-detect interface This  command  displays  data  about  Random  Early  Detection  (RED). Synt ax show random-detect interface [ interf ace-type interface-number ] Mode EXEC:  XSR> or XSR(config)# Sample Output The  following  commands  configure  p ...

  • Enterasys X-Pedition XSR CLI - page 506

    QoS Show Commands 12-110 Configuring Quality of Service DSCP min-th max-th mark-prob tail drop early drop 0 2 5 20 0 0 1 2 5 20 0 0 2 2 5 20 0 0 3 2 5 20 0 0 4 2 5 20 0 0 5 2 5 20 0 0 6 2 5 20 0 0 7 2 5 20 0 0 8 2 5 20 0 0 9 2 5 20 0 0 10 2 5 20 0 0 11 2 5 20 0 0 12 2 5 20 0 0 13 2 5 20 0 0 14 2 5 20 0 0 15 2 5 20 0 0 16 2 5 20 0 0 17 2 5 20 0 0 18 ...

  • Enterasys X-Pedition XSR CLI - page 507

    QoS Show Commands XSR CLI Reference Guide 12-111 49 2 5 20 0 0 50 2 5 20 0 0 51 2 5 20 0 0 52 2 5 20 0 0 53 2 5 20 0 0 54 2 5 20 0 0 55 2 5 20 0 0 56 2 5 20 0 0 57 2 5 20 0 0 58 2 5 20 0 0 59 2 5 20 0 0 60 2 5 20 0 0 61 2 5 20 0 0 62 2 5 20 0 0 63 2 5 20 0 0 Exponential weighting consta nt: 9 Parameter Descriptions show shape interface This  com ...

  • Enterasys X-Pedition XSR CLI - page 508

    QoS Show Commands 12-112 Configuring Quality of Service Sample Output This  following  commands  configure  shape  information  for  each  class.  In  the  following  example  policy ‐ map  shape  is  configured  as  follows: XSR(config)#policy-map Shape XSR(config-pmap<Shape>)#class d32 ...

  • Enterasys X-Pedition XSR CLI - page 509

    XSR CLI Reference Guide 13-83 13 Configuring ADSL Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  below . ADSL Configuration Commands The  following  command  sets  define  ADSL  functionality  on  the  XSR  including: • “CM ...

  • Enterasys X-Pedition XSR CLI - page 510

    CMV Commands 13-84 Configuring ADSL Synt ax cmv append command-ID offset value Mode AT M  Interface  configuration:  XSR(config-if<ATM xx >)# Example The  following  example  adds  the  CMV  DOP T  1  with  a  hex  va l u e : XSR(config-if<ATM0/1/1>)#cmv append DOPT 1 0x306090c0 cmv clear This ? ...

  • Enterasys X-Pedition XSR CLI - page 511

    CMV Commands XSR CLI Reference Guide 13-85 Synt ax cmv cr command-ID offset Mode AT M  Interface  configuration:  XSR(config-if<ATM xx >)# Example The  following  example  reads  CMV  ST A T  0  from  the  DSP: XSR(config-if<ATM0/1/1>)#cmv cr STAT 0 cmv cw This  command  writes  a  Command ...

  • Enterasys X-Pedition XSR CLI - page 512

    CMV Commands 13-86 Configuring ADSL Synt ax cmv delete command-ID offset [value] Mode AT M  Interface  configuration:  XSR(config-if<ATM xx >)# Example The  following  example  deletes  CMV  OP TN2 ,  from  the  retaining  list: XSR(config-if<ATM0/1/1>)#cmv delete OPTN 2 cmv print This  command  ...

  • Enterasys X-Pedition XSR CLI - page 513

    Other ADSL Commands XSR CLI Reference Guide 13-87 Synt ax cmv save file-name Mode AT M  Interface  configuration:  XSR(config-if<ATM xx >)# Example The  following  example  saves  the  CMV  training  list  to  file  ret ra i n ‐ list : XSR(config-if<ATM0/1/1>)#cmv save re train-list Save complete ...

  • Enterasys X-Pedition XSR CLI - page 514

    Other ADSL Commands 13-88 Configuring ADSL interface atm This  command  creates  an  AT M  interface  object  and  its  associ ated  device  driv er  which  downloads  the  specified  firmware  file  to  th e  on ‐ board  DSP .  Depending  on  the  size  of  the  ...

  • Enterasys X-Pedition XSR CLI - page 515

    Other ADSL Commands XSR CLI Reference Guide 13-89 • backup ‐ configures  and  enables  a  backup  interface  for  the  AT M  sub ‐ interface.  Refer  to  page  13 ‐ 90  for  the  command  description. • crypto ‐ enables  and  configures  VPN  parameters  on ? ...

  • Enterasys X-Pedition XSR CLI - page 516

    Other ADSL Commands 13-90 Configuring ADSL Default s • Backup :  Disabled • VPN :  Disabled • Description :  Set  to  the  empty  string • Encapsulation :  None • IP :  Not  configured • PPP :  Not  configured • OA M  procedures :  Disabled • AT M  PVC  VPI/VCI :  Set ? ...

  • Enterasys X-Pedition XSR CLI - page 517

    Other ADSL Commands XSR CLI Reference Guide 13-91 Default Disabled  by  default.  When  enabled,  all  operational  parameters  must  be  specified .  Example The  following  example  configures  a  sub ‐ interface  backup  with  a  Dialer  ID  of  1,  delay  of  20  ...

  • Enterasys X-Pedition XSR CLI - page 518

    Other ADSL Commands 13-92 Configuring ADSL XSR(config-if<ATM0/1/0.1>)#crypto ez ipsec XSR(config-if<ATM0/1/0.1>)#crypto ip sec df-bit copy XSR(config-if<ATM0/1/0.1>)#crypto ma p ets-vpn description This  command  adds  a  description  string  to  an  existing  AT M  sub ‐ interface.  This  com ...

  • Enterasys X-Pedition XSR CLI - page 519

    Other ADSL Commands XSR CLI Reference Guide 13-93 Synt ax of the “no” Form The  no  form  of  this  command  removes  any  form  of  encapsulation,  effectiv ely  disabling  the  sub ‐ interface: no encapsulation Mode AT M  Sub ‐ Interface  configuration:  XSR(config-if<ATM xx.x >)# D ...

  • Enterasys X-Pedition XSR CLI - page 520

    Other ADSL Commands 13-94 Configuring ADSL Synt ax ip address { ip-address / subnet-mask | negotiated } Synt ax of the “no” Form The  no  form  of  this  command  returns  this  parameter  to  its  def ault  setting: no ip address Mode AT M  Sub ‐ Interface  configuration:  XSR(config-if<ATM xx. ...

  • Enterasys X-Pedition XSR CLI - page 521

    Other ADSL Commands XSR CLI Reference Guide 13-95 oam-pvc This  command  enables  end ‐ to ‐ end  F5  (circuit)  OAM  cell  procedures  for  AT M  P ermanent  Vir t u a l  Circuit  (PVC)  management.  OAM  cells  and  how  they  are  used  are  as  follows: • Alarm  ...

  • Enterasys X-Pedition XSR CLI - page 522

    Other ADSL Commands 13-96 Configuring ADSL Example The  following  example  sets  the  OAM  frequency  to  20  seconds: XSR(config-if<ATM0/1/0.1>)#oam-pvc m anage 20 oam retry This  command  configures  parame ters  related  to  OAM  cell  handling  for  AT M  VC  management.  ...

  • Enterasys X-Pedition XSR CLI - page 523

    Other ADSL Commands XSR CLI Reference Guide 13-97 Synt ax pvc vpi/vci Synt ax of the “no” Form The  no  form  of  this  command  returns  this  parameter  to  its  def ault  setting: no pvc Mode AT M  Sub ‐ Interface  configuration:  XSR(config-if<ATM x / x / x . x >)# Default VPI/VCI  def ...

  • Enterasys X-Pedition XSR CLI - page 524

    Other ADSL Commands 13-98 Configuring ADSL no shut down This  command  sets  the  AT M  interface  to  the  administrative  Up  state  and  enables  the  line  for  operation.  Data  traffi c  cannot  flow  until  at  least  one  associated  sub ‐ interface  is  s ...

  • Enterasys X-Pedition XSR CLI - page 525

    PPP Configuration Commands XSR CLI Reference Guide 13-99 PPP Configuration Commands This  section  lists  the  subset  of  PPP  configuration  commands  that  apply  when  an  AT M  sub ‐ interface  is  configured  for  PPP o A  or  PPP oE  encapsulation. ppp chap This  command  ...

  • Enterasys X-Pedition XSR CLI - page 526

    PPP Configuration Commands 13-100 Configuring ADSL Synt ax of the “no” Form The  no  form  of  this  command  returns  this  parameter  to  its  def ault  setting: no ppp keepalive Mode AT M  Sub ‐ Interface  configuration:  XSR(config-if<ATM x / x / x . x >)# Default s • Disabled •K e e ...

  • Enterasys X-Pedition XSR CLI - page 527

    PPP Configuration Commands XSR CLI Reference Guide 13-101 Example The  following  example  sets  LCP  parameters: XSR(config-if<ATM0/1/0.1>)#ppp lcp m ax-configure 5 max-failure 5 max- terminate 2 XSR(config-if<ATM0/1/0.1>)# ppp max-bad-auth This  command  configures  the  maximum  number  of  authent ...

  • Enterasys X-Pedition XSR CLI - page 528

    PPP Configuration Commands 13-102 Configuring ADSL Synt ax of the “no” Form The  no  form  of  this  command  returns  this  parameter  to  its  def ault  setting: no ppp pap Mode AT M  Sub ‐ Interface  configuration:  XSR(config-if<ATM x / x / x . x >)# Default PA P  is  disabled Examp ...

  • Enterasys X-Pedition XSR CLI - page 529

    ATM Clear and Show Commands XSR CLI Reference Guide 13-103 ppp timeout retry This  command  sets  the  maximum  time  to  wai t  for  a  response  during  PPP  negotiation.  It  requires  a  properly  configured  AT M  sub ‐ interface  sp ecifying  encapsu lation  type  PPP o ...

  • Enterasys X-Pedition XSR CLI - page 530

    ATM Clear and Show Commands 13-104 Configuring ADSL Example The  following  example  clears  the  AT M  counters: XSR#clear counters atm show controllers atm This  command  displays  inter nal  hardw are  config uration  and  operational  interface  details  regarding:  receiv e  (Rx)  and ? ...

  • Enterasys X-Pedition XSR CLI - page 531

    ATM Clear and Show Commands XSR CLI Reference Guide 13-105 The  following  is  sample  output  when  a  sub ‐ interface  is  specified: XSR#show controllers atm 1/0.1 ********** ATM Sub-Interface Stats * ********* ATM 1/0.1 Packet Processor Tx Scheduler Stats: 952 Packet driver Tx OK 0 Packet driver not Tx: MUX END_ERR_ ...

  • Enterasys X-Pedition XSR CLI - page 532

    ATM Clear and Show Commands 13-106 Configuring ADSL Parameters in the Sub-Interface Response Packet Processor Tx Scheduler St ats A TM Sub-interface S t atistic Counters: DSP Image File : CFlash:adsl.fls Name  of  the  file  containing  the  DSP  image. DSP Image Rev.: 43e2ea93 V endor ʹ s  revision  of  the  DSP ? ...

  • Enterasys X-Pedition XSR CLI - page 533

    ATM Clear and Show Commands XSR CLI Reference Guide 13-107 show interface atm This  command  displays  the  running  configuration  and  st atistical  details  for  an  AT M  interface.  Statistics  supported  by  the  ADSL  interface  are  har dwa re  dependent.  General  categor ...

  • Enterasys X-Pedition XSR CLI - page 534

    ATM Clear and Show Commands 13-108 Configuring ADSL Examples The  following  is  sample  output  when  an  interface  is  sp ecified: XSR#show interface atm 1/0 ********** ATM Interface Stats ***** ***** ATM 1/0 is Admin Up / Oper Up The name of this device is adsl Administrative State is ENABLED Operational State is UP O ...

  • Enterasys X-Pedition XSR CLI - page 535

    ATM Clear and Show Commands XSR CLI Reference Guide 13-109 The logical link is currently Up The Name of the Access Concentrator is ENTERASY-CDDU1S The Session Id is 0x000b The MAC Address of the Access Concen trator is 0x00:60:f9:11:01:08 The MTU is 1492 The name of this device is adsl-0 Administrative state is ENABLED Operational State is UP Circu ...

  • Enterasys X-Pedition XSR CLI - page 536

    ATM Clear and Show Commands 13-110 Configuring ADSL Parameters in the Sub-Interface Response The  last  section  contains  the  MIB2  interface  table  as  described  in  RFC ‐ 1213. General info : MIB2  interface  table  entries  as  described  in  RFC ‐ 1213  including  AIS  F4 ...

  • Enterasys X-Pedition XSR CLI - page 537

    XSR CLI Reference Guide 14-83 14 Configuring the VPN Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. VPN Commands The  following  command  subsets  configure  the  Vir t u a l  Priv ate  Network  suite  ...

  • Enterasys X-Pedition XSR CLI - page 538

    PKI commands 14-84 Configuring the VPN • “Crypto  Map  Mode  Commands”  on  pag e 14 ‐ 110. • “Crypto  T ransform  Mode  Commands”  on  page 14 ‐ 115. • “Crypto  Show  Commands”  on  page 14 ‐ 118. • “Interface  CLI  Commands”  on  page 14 ‐ 121. • “Interface ...

  • Enterasys X-Pedition XSR CLI - page 539

    CA Identity Mode Commands XSR CLI Reference Guide 14-85 Synt ax of the “no” Form Use  the  no  form  to  delete  all  identity  information  and  certificates  associated  with  the  CA: no crypto ca identity name Mode Global  configuration:  XSR(config)# Next Mode Certificate  Authority  ...

  • Enterasys X-Pedition XSR CLI - page 540

    CA Identity Mode Commands 14-86 Configuring the VPN Mode Certificate  Authority  Identity  configuration:  XSR(ca-identity)# Example The  following  example  sets  the  CRL  to  be  retrieved  for  fi ve  hours: XSR(config)#crypto ca identity ACMEc a XSR(ca-identify)crl frequency 300 enrollment http-p ...

  • Enterasys X-Pedition XSR CLI - page 541

    CA Identity Mode Commands XSR CLI Reference Guide 14-87 Synt ax of the “no” Form The  no  form  of  this  command  resets  the  va l u e  to  the  default: no enrollment retry count Default 3 Mode Certificate  Authority  Identity  configuration:  XSR(ca-identity)# Example The  following  exampl ...

  • Enterasys X-Pedition XSR CLI - page 542

    CA Identity Mode Commands 14-88 Configuring the VPN XSR(config)#crypto ca identity ACMEc a XSR(ca-identity)#enrollment url http://ca_server XSR(ca-identity)#enrollment retry pe riod 5 enrollment url This  command  sets  the  Uniform  Resource  Locator  (URL)  of  the  Certificate  Authority  (CA).  If  the ...

  • Enterasys X-Pedition XSR CLI - page 543

    CA Identity Mode Commands XSR CLI Reference Guide 14-89 Synt ax crypto ca enroll name Synt ax of the “no” Form The  no  form  of  this  command  cancels  a  current  enrollment  request: no crypto ca enroll name Mode Global  configuration:  XSR(config)# Sample Output The  following  script  displays ...

  • Enterasys X-Pedition XSR CLI - page 544

    Other Certificate Comman ds 14-90 Configuring the VPN show crypto ca identity This  command  displays  data  about  enrolled  Certificate  Authorities  (CA). Synt ax show crypto ca identity Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  output  display s  ...

  • Enterasys X-Pedition XSR CLI - page 545

    Other Certificate Commands XSR CLI Reference Guide 14-91 Mode Global  configuration:  XSR(config)# Sample Output The  following  script  prompts  yo u  to  accept  the  certificate. XSR#crypto ca authenticate ACMEca Certificate has the following attrib utes: Fingerprint: 0123 4567 89AB CDEF 012 3 Do you accept this ...

  • Enterasys X-Pedition XSR CLI - page 546

    Other Certificate Comman ds 14-92 Configuring the VPN crypto ca crl request This  command  downloads  a  new  Certificate  Rev ocation  List  (CRL)  from  the  specified  Certificate  Authority  (CA),  updating  the  CRL. Synt ax crypto ca crl request name Mode Global  configuration:  XSR(con ...

  • Enterasys X-Pedition XSR CLI - page 547

    Other Certificate Commands XSR CLI Reference Guide 14-93 Issuer: C=US, O=sml, CN= ldapca Valid From: 2002 Aug 20th, 1 8:26:01 GMT Valid To: 2002 Aug 20th, 2 0:01:01 GMT Issuing CDP: ldap://ldapca.sml.com/CN=ldapca( 6),CN=ldapca,CN=CDP,CN=Publ ic%20Key%20Services,CN=Services,CN=C onfiguration,DC=sml,DC=com?certif icateRevoc ationList?base?objectclas ...

  • Enterasys X-Pedition XSR CLI - page 548

    IKE Security Protocol Commands 14-94 Configuring the VPN The  following  is  sample  output  from  the  command  when  the  CA  supports  an  RA.  In  thi s  example,  CA  and  RA  certificates  wer e  requested  ear lier  by  the  crypto ca authenticate  command. XSR& ...

  • Enterasys X-Pedition XSR CLI - page 549

    ISAKMP Protocol Policy Mode Commands XSR CLI Reference Guide 14-95 ISAKMP Protocol Policy Mode Commands crypto isakmp proposal This  command  de fines  an  IKE  proposal  (policy) ‐ a  set  of  parameters  used  during  IKE  negotiation.  It  invokes  ISAKMP  protocol  poli cy  config ...

  • Enterasys X-Pedition XSR CLI - page 550

    ISAKMP Protocol Policy Mode Commands 14-96 Configuring the VPN Next Mode ISAKMP  protocol  proposal  configuration:  XSR(config-isakmp)# Example The  following  example  configures  two  policies  for  the  peer: XSR(config)#crypto isakmp proposal 5 7 XSR(config-isakmp)#hash md5 XSR(config-isakmp)#authentication ...

  • Enterasys X-Pedition XSR CLI - page 551

    ISAKMP Protocol Policy Mode Commands XSR CLI Reference Guide 14-97 encryption This  command  sets  the  encryption  algorithm  used  in  an  IKE  proposal  (policy). Synt ax encryption { des | 3des | aes } Synt ax of the “no” Form The  no  form  of  this  commands  resets  the  algorithm ...

  • Enterasys X-Pedition XSR CLI - page 552

    ISAKMP Protocol Policy Mode Commands 14-98 Configuring the VPN Synt ax of the “no” Form The  no  form  of  this  command  resets  the  va l u e  to  the  default: no group Default Group  2 Mode ISAKMP  protocol  policy  configuration:  XSR(config-isakmp)# Example The  following  example  ...

  • Enterasys X-Pedition XSR CLI - page 553

    Remote Peer ISAKMP Protocol Policy Mode Commands XSR CLI Reference Guide 14-99 lifetime This  command  specifies  the  lifetime  of  an  IKE  Se curity  Association  (SA)  for  a  giv en  IKE  proposal  (policy). Synt ax lifetime seconds Synt ax of the “no” Form The  no  form  of  this ...

  • Enterasys X-Pedition XSR CLI - page 554

    Remote Peer ISAKMP Protocol Policy Mode Commands 14-100 Configuring the VPN Synt ax crypto isakmp peer_address subnet-ma sk Synt ax The  no  form  of  this  command  removes  policies  from  a  re mote  peer: no crypto isakmp peer peer_address s ubnet-mask Mode Global  configuration:  XSR(config)# Next Mode Re ...

  • Enterasys X-Pedition XSR CLI - page 555

    Remote Peer ISAKMP Protocol Policy Mode Commands XSR CLI Reference Guide 14-101 Default Disabled Mode Remote  P eer  ISAKMP  protocol  policy  configuration:  XSR(config-isakmp-peer)# Example The  following  example  configures  the  IKE  IP  address  assignment  mode  to  client : XSR(config)#cryp ...

  • Enterasys X-Pedition XSR CLI - page 556

    Remote Peer ISAKMP Protocol Policy Mode Commands 14-102 Configuring the VPN XSR(config-isakmp-peer)#exchange-mod e main nat-traversal The  command  sets  the  IKE  and  IPSec  NA T  (Network  Add ress  T ranslation)  trav ersal  mode  used  when  communicating  with  remote  peers  matching ? ...

  • Enterasys X-Pedition XSR CLI - page 557

    Remote Peer ISAKMP Protocol Policy Mode Commands XSR CLI Reference Guide 14-103 Synt ax of the “no” Form The  no  form  of  this  command  removes  policies  from  the  peer: no proposal Mode Remote  P eer  ISAKMP  protocol  policy  configuration:  XSR(config-isakmp-peer)# Example The  followin ...

  • Enterasys X-Pedition XSR CLI - page 558

    Remote Peer Show Commands 14-104 Configuring the VPN Remote Peer Show Commands show crypto isakmp peer This  command  displays  attributes  for  each  ISAKMP  peer .  IKE ʹ s  first  config uration  der ives  from  the  IP  address  of  the  remote  peer .  ISAKMP  peers  created ? ...

  • Enterasys X-Pedition XSR CLI - page 559

    Remote Peer Show Commands XSR CLI Reference Guide 14-105 show crypto isakmp proposal This  command  lists  attributes  for  each  Internet  Key  Exchange  (IKE)  proposal.  ISAKMP  proposals  created  with  EZ ‐ IPSec  are  ma rked  with  an  asterisk  (*)  in  the  show  ...

  • Enterasys X-Pedition XSR CLI - page 560

    IPSec Commands 14-106 Configuring the VPN Parameters Descriptions Main Mode Exchange Aggressive Mode Exchange Quick Mode Exchange IPSec Commands This  section  describes  commands  that  configure  the  IPSec  protocol  which  pr ovides  anti ‐ replay  protection  as  wel l  as  da ta  authentica ...

  • Enterasys X-Pedition XSR CLI - page 561

    IPSec Commands XSR CLI Reference Guide 14-107 Synt ax access-list acl-number { deny | permit } protocol [ source_addr source_mask [ eq port ] destination_addr destination_mask [ eq port ] Synt ax of the “no” Form The  no  form  of  this  command  removes  the  access  list: no access-list acl-number { deny | permit } ...

  • Enterasys X-Pedition XSR CLI - page 562

    IPSec Clear and Show Commands 14-108 Configuring the VPN IPSec Clear and Show Commands clear crypto sa This  command  deletes  IPSec  Securi ty  Associations  (SAs )  as  follows: •I f  the  SAs  wer e  established  via  IKE,  they  are  delete d  and  future  IPSec  traffic  wi ll ...

  • Enterasys X-Pedition XSR CLI - page 563

    IPSec Clear and Show Commands XSR CLI Reference Guide 14-109 Default If  an  access  list  number  is  not  specified,  all  access  lists  are  shown. Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Examples The  following  example  displays  configured  access  list ...

  • Enterasys X-Pedition XSR CLI - page 564

    Crypto Map Mode Commands 14-110 Configuring the VPN Sample Output The  following  output  display s  when  a  master  key  is  generated: XSR(config)#crypto key master genera te New key is 8573 4583 3994 2ff5 183b 4bdf fe92 dbc1 1132 ffe0 f8d9 3759 A  script  displays  when  a  master  key  is  spe ...

  • Enterasys X-Pedition XSR CLI - page 565

    Crypto Map Mode Commands XSR CLI Reference Guide 14-111 Crypto Map Rules A  crypto  map  is  a  collection  of  rules,  each  with  a  different  seq ‐ num  but  the  same  map ‐ name .  So,  for  a  given  interface,  yo u  can  have  certain  traffic  forw arded ...

  • Enterasys X-Pedition XSR CLI - page 566

    Crypto Map Mode Commands 14-112 Configuring the VPN Synt ax of the “no” Form Use  the  no  form  to  remov e  the  ACL  from  a  crypto  map  entry: no match address [ access-list-id ] Default No  access  lists  are  matche d  to  th e  crypto  map  entry . Mode Crypto  Map  c ...

  • Enterasys X-Pedition XSR CLI - page 567

    Crypto Map Mode Commands XSR CLI Reference Guide 14-113 Mode Crypto  Map  configuration:  XSR( config-crypto-m)# Example This  example  defines  a  tr ansform ‐ set  and  changes  the  mode  to  transport  mode.  The  mode  val ue  only  applies  to  IP  traffic  with  source ...

  • Enterasys X-Pedition XSR CLI - page 568

    Crypto Map Mode Commands 14-114 Configuring the VPN set security-association level per-host This  command  specifies  that  separate  IPSec  Security  Associati ons  (SAs)  should  be  requested  for  each  source/destination  host  pair . Synt ax set security-association level per-h ost Synt ax of th ...

  • Enterasys X-Pedition XSR CLI - page 569

    Crypto Transform Mode Commands XSR CLI Reference Guide 14-115 Example This  example  defines  tw o  transform ‐ sets,  specifying  both  ca n  be  used  within  a  crypto  map  entry .  When  traffic  matches  ACL  101 ,  the  SA  can  use  either  transform ‐ set  my ...

  • Enterasys X-Pedition XSR CLI - page 570

    Crypto Transform Mode Commands 14-116 Configuring the VPN Mode of the “no” Form The  no  form  of  the  command  deletes  a  transfor m ‐ set: no crypto ipsec transform-set transf orm-set-name Mode Global  configuration:  XSR(config)# Next Mode Crypto  Tr a n s f o r m  configuration: XSR(cfg-crypto-tran)# ...

  • Enterasys X-Pedition XSR CLI - page 571

    Crypto Transform Mode Commands XSR CLI Reference Guide 14-117 Mode Crypto  Tr a n s f o r m  configuration:  XSR(cfg-crypto- tran)# Example This  example  selects  PFS  group  2  whe never  a  new  SA  is  negotiated  for  crypto  map  ACMEmap : XSR(config)#crypto map ACMEmap 7 ips ec-isakmp ...

  • Enterasys X-Pedition XSR CLI - page 572

    Crypto Show Commands 14-118 Configuring the VPN Crypto Show Commands show crypto ip sec sa This  command  displays  current  Security  Associations  (SAs)  settings. Synt ax show crypto ipsec sa [ map map-name | address ] Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following ...

  • Enterasys X-Pedition XSR CLI - page 573

    Crypto Show Commands XSR CLI Reference Guide 14-119 show crypto ip sec transform-set This  command  displays  configured  transform ‐ sets.  IPSe c  transform ‐ sets  created  with  EZ ‐ IPSec  configuration  are  marked  with  an  asterisk  (*)  in  the  show  output.  These  ...

  • Enterasys X-Pedition XSR CLI - page 574

    Crypto Show Commands 14-120 Configuring the VPN show crypto map This  command  displays  the  crypto  map  configuration.  IPSec  crypto  maps  created  with  EZ ‐ IPSec  configuration  are  marked  with  an  asterisk  (* )  in  the  leftmost  column  of  the  show  ...

  • Enterasys X-Pedition XSR CLI - page 575

    Interface CLI Commands XSR CLI Reference Guide 14-121 Interface CLI Commands crypto map This  command  applies  a  previously  defined  crypto  map  to  an  interf ace.  It  is  governe d  by  the  following  rules: •A  crypto  map  must  be  assi gned  to  an  interface ? ...

  • Enterasys X-Pedition XSR CLI - page 576

    Interface VPN Commands 14-122 Configuring the VPN crypto ezip sec This  command  creates  a  suite  of  IPSec  policies,  sorted  by  cryptograp hic  strength,  that  are  offered  to  the  remote  security  gateway .  The  gatew ay  selects  one  of  these  policies  ...

  • Enterasys X-Pedition XSR CLI - page 577

    Interface VPN Commands XSR CLI Reference Guide 14-123 • ip multicast-redirect - Native  IPSec  tunnels  attached  to  VPN  interfaces  will  not  easily  forward  multicast  traffic  multicast  packet  redirection  to  the  unicast  address  of  the  remote  tunnel  endpoint. ...

  • Enterasys X-Pedition XSR CLI - page 578

    Interface VPN Commands 14-124 Configuring the VPN A  mul ti ‐ point  interface  accepts  many  inbound  tunnels  and  is  used  when  the  XSR  is  configured  as  a  remote  access  VPN  gatew ay . Synt ax interface vpn { number }{ point-to-poin t | multi-point } Synt ax of the “no” ...

  • Enterasys X-Pedition XSR CLI - page 579

    Interface VPN Commands XSR CLI Reference Guide 14-125 Mode VPN  Interface  configuration:  XSR(config ‐ if<xx>)# Example The  following  example  configures  VPN  interface  1  with  an  IP  address,  and  TOS  copy  enabled.  It  also  sets  a  peer  IP  address,  G ...

  • Enterasys X-Pedition XSR CLI - page 580

    Interface VPN Commands 14-126 Configuring the VPN ip address negotiated This  command  marks  the  VPN  interface  to  dynamically  get  its  IP  address  via  the  tunnel  protocol.  PPTP  and  L2TP  protocols  use  PPP  IPCP  and  IPSec/IKE  uses  the  Mode  Confi ...

  • Enterasys X-Pedition XSR CLI - page 581

    Tunnel Commands XSR CLI Reference Guide 14-127 Mode  Internet  Protocol  Interface  configuration:  XSR( config-int<vpn>)# Example This  example  redirects  multicas t  traffic  to  the  remote  tunnel  server: XSR(config)#interface vpn 57 multi-p oint XSR(config-int<vpn>)#ip multicast-re direct ...

  • Enterasys X-Pedition XSR CLI - page 582

    Tunnel Commands 14-128 Configuring the VPN • set protocol - Defines  the  VPN  tunneling  protocol  used  when  the  tunnel  is  created:  client  mode  or  network  ext ension  mode.  Refer  to  page  14 ‐ 130  for  the  command  definition. • set user -  Username  ...

  • Enterasys X-Pedition XSR CLI - page 583

    Tunnel Commands XSR CLI Reference Guide 14-129 Mode Tu n n e l  configuration:  XSR(config-tms-tunnel)# Example The  following  example  enables  the  tu nnel  ACME_VPN: XSR(config)#interface vpn 57 multi-p oint XSR(config-int<vpn>)#tunnel ACME_VPN XSR#(config-tms-tunnel)#set active set heartbeat This  command  c ...

  • Enterasys X-Pedition XSR CLI - page 584

    Tunnel Commands 14-130 Configuring the VPN set peer This  command  specifies  the  physical  IP  address  of  the  remote  VPN  gatew ay . Synt ax set peer ip-address Synt ax of the “no” Form no set peer ip-address Mode Tu n n e l  configuration:  XSR#(config-tms-tunnel)# Example The  following  exam ...

  • Enterasys X-Pedition XSR CLI - page 585

    Tunnel Commands XSR CLI Reference Guide 14-131 Mode Tu n n e l  configuration:  XSR#(config-tms-tunnel)# Default IPSec Examples The  following  example  sets  the  IPSec  tunnel  protocol  in  client  mode: XSR(config)#interface vpn 29 point-t o-point XSR(config-int<vpn>)#tunnel ACME_VPN XSR#(config-tms-tun ...

  • Enterasys X-Pedition XSR CLI - page 586

    Tunnel Clear and Show Commands 14-132 Configuring the VPN T unnel Clear and Show Commands clear tunnel This  command  terminates  a  non ‐ GRE  tunnel  associated  wi th  a  user  or  tunnel  ID.  T unnels  will  re ‐ establish  themselves  if  set  to  do  so  unless  the ...

  • Enterasys X-Pedition XSR CLI - page 587

    Tunnel Clear and Show Commands XSR CLI Reference Guide 14-133 User: xsrclient Tunnel ID: 40000001 VPN Interface: VPN1 Group: xsrgroup Connect Time: 11/05/2003, 23:39 Protocol: L2TP Authentication Method: MS-CHAPv2 Packets In/Out: 0000000088/0000000027 Errors In/Out: 0000000000/0000000000 Discards In/Out: 0000000000/0000000000 The  following  ...

  • Enterasys X-Pedition XSR CLI - page 588

    Additional Tunnel Termination Commands 14-134 Configuring the VPN Additional T unnel T ermination Commands ip local pool This  command  configures  a  local  pool  of  IP  addresses  for  when  a  remote  peer  connects  to  a  point ‐ to ‐ multipoint  interface  or  for  use  by ...

  • Enterasys X-Pedition XSR CLI - page 589

    Additional Tunnel Termination Commands XSR CLI Reference Guide 14-135 exclude This  sub ‐ command  bars  the  use  of  a  range  of  IP  addresses  fr om  an  earlier  created  IP  pool. Synt ax exclude { ip address } { number } Synt ax of the “no” Form The  no  form  of  this  co ...

  • Enterasys X-Pedition XSR CLI - page 590

    Additional Tunnel Termination Commands 14-136 Configuring the VPN show ip local pool This  command  displays  statistics  for  any  define d  IP  address  pools. Synt ax show ip local pool [ name ] Mode Privileged  EXEC:  XSR# Sample Output This  output  displays  when  the  command  is  specifi ...

  • Enterasys X-Pedition XSR CLI - page 591

    DF Bit Commands XSR CLI Reference Guide 14-137 10.120.122.22 10.120.122.24 10.120.122.25 10.120.122.26 10.120.122.28 10.120.122.31 10.120.122.32 Inuse addresses: 10.120.122.10 10.120.122.21 10.120.122.23 10.120.122.27 10.120.122.29 10.120.122.30 10.120.122.34 Excluded addresses: Reserved addresses: 10.120.122.0 10.120.122.4 Parameter Description DF ...

  • Enterasys X-Pedition XSR CLI - page 592

    DF Bit Commands 14-138 Configuring the VPN Default s • Disabled • Copy  setting Mode Global  configuration:  XSR(config)# Example The  following  example  clears  the  DF  bit  on  all  interfaces: XSR(config)#crypto ipsec df-bit clea r crypto ip sec df-bit (Interface configuration) This  command  sets ...

  • Enterasys X-Pedition XSR CLI - page 593

    XSR CLI Reference Guide 15-83 15 Configuring DHCP Observing Synt ax and Conventions The  CLI  command  syntax  and  conventions  use  the  notation  described  in  the  following  table. DHCP Commands The  following  commands  configure  the  Dynami c  Host  Configurat ion  Protocol  ...

  • Enterasys X-Pedition XSR CLI - page 594

    DHCP Commands 15-84 Configuring DHCP Synt ax of the “no” Form Use  the  no  form  of  this  command  to  del ete  the  boot  image  name: no bootfile Mode Any  of  the  following  command  modes  are  av ailable: DHCP  pool  configuration:  XSR(config-dhcp-pool )# DHCP  host ? ...

  • Enterasys X-Pedition XSR CLI - page 595

    DHCP Commands XSR CLI Reference Guide 15-85 Example The  following  example  specifies  string  clientclass1  that  will  be  the  name  of  the  client  class: XSR(config-dhcp-pool)#client-class c c1 client-identifier This  command  specifies  the  unique  identifier  (i n  dotted  ...

  • Enterasys X-Pedition XSR CLI - page 596

    DHCP Commands 15-86 Configuring DHCP Example The  following  example  specifies  the  client  identifier  for  MAC  address  00.01f4.0127.10  in  dotted  hexadecimal  notation: XSR(config-dhcp)#client-identifier 0 100.01f4.0127.10 The  following  example  specifies  the  client  identifier ...

  • Enterasys X-Pedition XSR CLI - page 597

    DHCP Commands XSR CLI Reference Guide 15-87 debug ip dhcp server This  command  enables  DHCP  server  de bugging.  Thi s  command  should  be  used  for  troubleshooting  purposes  only . Synt ax debug ip dhcp server { events | packe ts | linkages } Synt ax of the “no” Form Use  no  form  of ? ...

  • Enterasys X-Pedition XSR CLI - page 598

    DHCP Commands 15-88 Configuring DHCP Mode Any  of  the  following  command  modes  are  av ailable: DHCP  pool  configuration:  XSR(config-dhcp-pool )# DHCP  host  configuration:  XSR(config-dhcp-host)# DHCP  client  class  configuration:  XSR(config-dhcp-clas s)# Example The  following  exam ...

  • Enterasys X-Pedition XSR CLI - page 599

    DHCP Commands XSR CLI Reference Guide 15-89 Example The  following  example  specifies  1 1.12.1.99  as  the  IP  address  of  the  DNS  serv er  of  a  client  in  the  subnet: XSR(config-dhcp-pool)#dns-server 11. 12.1.99 The  following  example  specif ies  1 1.12.1.99  as  t ...

  • Enterasys X-Pedition XSR CLI - page 600

    DHCP Commands 15-90 Configuring DHCP The  following  example  specifies  enterasys.com  as  the  domain  name  of  any  client  in  the  client ‐ class  engineering : XSR(config-dhcp-pool)#client-class e ngineering XSR(config-dhcp-class)#domain-name e nterasys.com hardware-address This  command  ...

  • Enterasys X-Pedition XSR CLI - page 601

    DHCP Commands XSR CLI Reference Guide 15-91 Examples The  following  example  specifies  the  hardw are  address  for  the  DHCP  client  host  to  be  of  Ethernet  type  with  MAC  address  0001.f401.2710 : XSR(config-dhcp-pool)#hardware-addre ss 0001.f401.2710 ethernet The  following ...

  • Enterasys X-Pedition XSR CLI - page 602

    DHCP Commands 15-92 Configuring DHCP Next Mode When  this  command  is  specified  from  either  DHCP  pool  configuration  mode  or  DHCP  class  configuration  sub ‐ mode,  the  CL I  acquires  DHCP  host  config uration  mode.  When  specified  from  DHCP  host ? ...

  • Enterasys X-Pedition XSR CLI - page 603

    DHCP Commands XSR CLI Reference Guide 15-93 Default DCHP  Client  is  not  active  on  an  interface Mode Interface  configuration:  XSR(config-if< xx >)# Example The  following  example  enables  DHCP  Client: XSR(config)#interface FastEthernet1 XSR(config-if< F1 >)#ip address dhcp ip dhcp ping ...

  • Enterasys X-Pedition XSR CLI - page 604

    DHCP Commands 15-94 Configuring DHCP Synt ax ip dhcp ping timeout milliseconds Synt ax of the “no” Form Use  the  no  form  of  this  command  to  restor e  the  ping  timeout  default: no ip dhcp ping timeout Default 500  milliseconds Mode Global  configuration:  XSR(config)# Example The  followi ...

  • Enterasys X-Pedition XSR CLI - page 605

    DHCP Commands XSR CLI Reference Guide 15-95 Mode Global  configuration:  XSR(config)# Next Mode DHCP  pool  configuration:  XSR(config-dhcp-pool )# Example The  following  example  adds  IP  local  pool  sales  with  specified  subnetworks  and  defines  sales  as  the  name  of  ...

  • Enterasys X-Pedition XSR CLI - page 606

    DHCP Commands 15-96 Configuring DHCP ip local pool This  command,  when  issued  multipl y ,  configures  a  local  pool  of  IP  addre sses  to  be  used  for  a  DHCP  Server  pool  ran ge.  Use  it  in  conjunction  with  the  no  form  of  to  create ? ...

  • Enterasys X-Pedition XSR CLI - page 607

    DHCP Commands XSR CLI Reference Guide 15-97 exclude This  sub ‐ command  of  ip local pool  bars  the  use  of  a  range  of  IP  address es  from  an  earlier  created  IP  pool. Synt ax exclude { ip address }{ number } Synt ax of the “no” Form The  no  form  exempts  the  ...

  • Enterasys X-Pedition XSR CLI - page 608

    DHCP Commands 15-98 Configuring DHCP lease This  command  configures  the  duration  of  the  lease  for  an  IP  address  that  a  DHCP  server  assigns  to  a  DHCP  client.  The  lease  time  set  is  the  system  de fault  val u e  which  ove rrides  ...

  • Enterasys X-Pedition XSR CLI - page 609

    DHCP Commands XSR CLI Reference Guide 15-99 netbios-name- server This  command  configures  NetBIOS  W indows  Internet  Naming  Service  (WINS)  name  servers  that  are  av ailable  to  Microsoft  DHCP  clients.  Depending  on  the  client  configuration  inheritance,  the ? ...

  • Enterasys X-Pedition XSR CLI - page 610

    DHCP Commands 15-100 Configuring DHCP netbios-node-type This  command  configures  the  NetBIOS  node  type  for  Microsoft  DHCP  clients.  Depending  on  the  client  configuration  inheritance,  the  command  should  be  used  in  proper  mode.  If  it  is  speci ...

  • Enterasys X-Pedition XSR CLI - page 611

    DHCP Commands XSR CLI Reference Guide 15-101 next-server This  command  specifies  the  server  from  whi ch  the  initial  boot  file  will  be  loaded.  The  server  can  be  designated  either  by  IP  address  or  hostname. Synt ax next-server server [ hostname | ip_ad dres ...

  • Enterasys X-Pedition XSR CLI - page 612

    DHCP Commands 15-102 Configuring DHCP Synt ax of the “no” Form Use  the  no  form  of  this  command  to  remov e  the  options: no option code [ instance number ] Default Default  instance  number:  0 Mode Any  of  the  following  command  modes  are  av ailable: DHCP  pool  con ...

  • Enterasys X-Pedition XSR CLI - page 613

    DHCP Commands XSR CLI Reference Guide 15-103 5 Name Server BOOTP/IP address list - IEN 1 16 name serve rs availab le to a c lient. List in order of preference . Length: 4-octet minimum; multiples of 4 6 * Domain Name Server Basic, MS DHCP Client/ IP address list - List of Domain Name System (STD 13, RFC-1035) name serve rs available to a client. Li ...

  • Enterasys X-Pedition XSR CLI - page 614

    DHCP Commands 15-104 Configuring DHCP 20 Non-Local Source Routing Host IP/ Boolean (hex) false S pecifies whether a cli ent will config ure its IP layer to allow forwarding of datagrams with non-local source routes. Length: 1 octet V alues: 0=disabl e; 1=enable 21 Policy Filter Host IP/ Alternating IP address/ mask - Policy filters for non-local so ...

  • Enterasys X-Pedition XSR CLI - page 615

    DHCP Commands XSR CLI Reference Guide 15-105 32 Router Solicitation Address Interface/ IP address - Address to which a client should send router solicitation requests. Length: 4 octets 33 S tatic Route Interface/ IP address pai rs - S tatic routes that a client will install in its routing cache. If mu ltiple routes to the same destination are speci ...

  • Enterasys X-Pedition XSR CLI - page 616

    DHCP Commands 15-106 Configuring DHCP 44 * NetBIOS over TCP/ IP Name Server WINS/ NetBIOS, MS DHCP Client/ IP address list - RFC-1001/1002 NBNS name servers listed by preference. Length: 4-octet minimum; multiples of 4 CLI command: netbios-name-server 45 NetBIOS over TCP/ IP Datagram Distribution Server WINS/ NetBIOS /IP address list - NBDD name se ...

  • Enterasys X-Pedition XSR CLI - page 617

    DHCP Commands XSR CLI Reference Guide 15-107 53 DHCP Message Ty p e - - Conveys the type of DHCP message . The default is 1 (DHCPDISCOVER). 1=DHCPDISCOVER 2=DHCPOFFER 3=DHCPREQUEST 4=DHCPDECLINE 5=DHCP ACK 6=DHCPNAK 7=DHCPRELEASE 8=DHCPINFORM Length: 1 octet 54 Server Identifier IP address - Used in DHCPOFFER and DHCPREQUEST messages, and may optio ...

  • Enterasys X-Pedition XSR CLI - page 618

    DHCP Commands 15-108 Configuring DHCP 61 * Client- Identifier Basic/S tring - A DHCP client’s unique identifier . DHCP servers use this value to in dex their database of address bindings. This value is expected to be unique for all clients in an administrative domain. Length: 2-octet minimum CLI command: ip address dhcp 64 NIS+ Domain Servers/ AS ...

  • Enterasys X-Pedition XSR CLI - page 619

    DHCP Commands XSR CLI Reference Guide 15-109 Examples The  following  example  configures  DHCP  option  33,  which  specifies  static  routes  that  the  client  should  install  in  it s  routing  cache.  If  multiple  routes  to  the  same  d estination  are  set ...

  • Enterasys X-Pedition XSR CLI - page 620

    DHCP Commands 15-110 Configuring DHCP The  following  example  configures  DHCP  option  36,  which  specifies  Ethernet  encapsulation  Ve r s i o n  2  (RFC ‐ 894)  or  IEEE  802.3  for  DHCP  clients.  Ve r s i o n  2  encapsulation  is  set  in  this  example: XS ...

  • Enterasys X-Pedition XSR CLI - page 621

    DHCP Clear and Show Commands XSR CLI Reference Guide 15-111 service dhcp This  command  enables  DHCP  server  functionality  to  respond  to  client  requests.  Al though  DHCP  server  is  enabled  by  default  on  all  XSR  interfaces,  you  can  optionally  enable  or ...

  • Enterasys X-Pedition XSR CLI - page 622

    DHCP Clear and Show Commands 15-112 Configuring DHCP Example The  example  below  deletes  address  binding  18.12.22.99  from  a  DHCP  server  bi ndings  database: XSR#clear ip dhcp binding 18.12.22.9 9 clear ip dhcp server st atistics This  command  resets  all  DHCP  se rver  counters.  A ...

  • Enterasys X-Pedition XSR CLI - page 623

    DHCP Clear and Show Commands XSR CLI Reference Guide 15-113 Parameter Descriptions show interface This  command  displays  DHCP  interface’ s  IP  address  and  subnet  mask.  When  negotiating,  the  interface  will  indicate ʺ Internet  address  is  not  assi gned ʺ . Synt ax show in ...

  • Enterasys X-Pedition XSR CLI - page 624

    DHCP Clear and Show Commands 15-114 Configuring DHCP show ip dhcp binding This  command  displays  activ e  address  bindings  on  the  DHCP  serve r .  If  the  address  is  not  specified,  all  address  bindings  are  shown .  Otherwise,  only  the  binding  for  the ? ...

  • Enterasys X-Pedition XSR CLI - page 625

    DHCP Clear and Show Commands XSR CLI Reference Guide 15-115 11.1.0.253 0002.2ab4.4b01 JUL 19 2003 05:07PM Automatic Y The  following  example  the  displays  lease  expiration  of  DHCP  client  11.1.0.253  in  local  time: XSR#show ip dhcp binding local 11.1. 0.253 IP address Hardware address Lease expiration ...

  • Enterasys X-Pedition XSR CLI - page 626

    DHCP Clear and Show Commands 15-116 Configuring DHCP Message Sent BOOTREPLY 12 DHCPOFFER 19 DHCPACK 17 DHCPNAK 6 Parameter Descriptions Memory  usage Sum  of  bytes  of  RAM  allocated  by  the  DHCP  server . Address  pools Sum  of  configured  address  pools  in  the  DHCP  database. Databa ...

  • Enterasys X-Pedition XSR CLI - page 627

    XSR CLI Reference Guide 16-83 16 Configuring Security Observing Synt ax and Conventions The  CLI  Syntax  and  conv entions  use  the  notation  descri bed  in  the  following  table. The  following  set  of  commands  allows  you  to  define  security  features  for  the  X ...

  • Enterasys X-Pedition XSR CLI - page 628

    General Security Commands 16-84 Configuring Security General Security Commands access-list (extended) This  command  defines  an  extended  IP  Access  List  (ACL)  by  number  ranging  from  100  to  199.  Yo u  can  restri ct  or  allow  the  following  traffi c: •I P  (Any ...

  • Enterasys X-Pedition XSR CLI - page 629

    General Security Commands XSR CLI Reference Guide 16-85 Additional Synt ax The access-list  command  also  provides  the  move  option,  expressed  in  the  following  syntax: access-list list-number move destina tion src1 [ src2 ] Synt ax of the “no” Form The  no  form  of  this  command  remo ...

  • Enterasys X-Pedition XSR CLI - page 630

    General Security Commands 16-86 Configuring Security Mode Global  configuration:  XSR(config)# Default No  access  list  defined  (that  is,  all  access  permitted) Examples The  following  example  denies  access  only  for  ICMP  packets  coming  from  hosts  on  the  three ...

  • Enterasys X-Pedition XSR CLI - page 631

    General Security Commands XSR CLI Reference Guide 16-87 Synt ax access-list list# [[{ insert | replace | move }] [{ ent ry# destination source1 [ source2 ]]}{ deny | permit }{log} { src IpAddr [ srcWildCardBits ]| host srcIpAddr | any } Synt ax of the “no” Form The  no  form  of  this  command  removes  the  def ined  ...

  • Enterasys X-Pedition XSR CLI - page 632

    General Security Commands 16-88 Configuring Security Examples The  following  example  allows  access  only  to  those  hosts  on  the  three  specified  networks.  The  wildcard  bits  apply  to  the  host  portions  of  the  netw ork  addr esses.  An y  host  wi t ...

  • Enterasys X-Pedition XSR CLI - page 633

    General Security Commands XSR CLI Reference Guide 16-89 Synt ax of the “no” Form Threshold  logging  is  disabled  with  the  no  form  of  this  command : no access-list log-update-threshold Mode Global  configuration:  XSR(config)# Default Disabled Example The  following  example  enables  alarm ...

  • Enterasys X-Pedition XSR CLI - page 634

    General Security Commands 16-90 Configuring Security Example The  example  below  enables  protection  from  land  attack  and  large  ICMP  packets.  Synflood  protection  wil l  trigger  for  more  than  7  sessions.  Protection  against  large  ICMP  packets  will  ...

  • Enterasys X-Pedition XSR CLI - page 635

    Security Clear and Show Commands XSR CLI Reference Guide 16-91 Security Clear and Show Commands clear host dos-counters This  command  clears  all  host  security  statistics. Synt ax clear hostdos-counters Mode  Privileged  EXEC:  XSR# show access-list s This  command  displays  configured  IP  access  ...

  • Enterasys X-Pedition XSR CLI - page 636

    Security Clear and Show Commands 16-92 Configuring Security show access-list log-up date-threshold This  command  displays  ACL  log  information.  It  is  processed  as  follows: •A  packet  with  a  fresh  source  IP  address  on  the  ACL  group  is  reported  immediately ...

  • Enterasys X-Pedition XSR CLI - page 637

    AAA Commands XSR CLI Reference Guide 16-93 IP packet with Multicast/broadcast s ource address Always enabled No attacks Syn flood attack mitigation Always enabled 100 attacks Fragmented ICMP traffic Enabled 38 attacks Large ICMP packets Enabled;Size 1024 42 attacks Ping-of-Death attack Always enabled No attack Filter TCP traffic with Syn and Fin bi ...

  • Enterasys X-Pedition XSR CLI - page 638

    AAA Usergroup Commands 16-94 Configuring Security Mode Global  configuration:  XSR(config)# Examples The  following  example  configures  the  Te l n e t  sub ‐ system  to  use  the  AAA  sub ‐ system: XSR(config)#aaa client telnet The  following  example  configures  the  SSH  sub ‐ sy ...

  • Enterasys X-Pedition XSR CLI - page 639

    AAA Usergroup Commands XSR CLI Reference Guide 16-95 Example The  following  example  adds  the  usergroup  headquarter s: XSR(config)#aaa group headquarters XSR(aaa-group)# dns server This  command  sets  the  address  of  DNS  servers.  These  addresses  are  give n  to  connecting  clie ...

  • Enterasys X-Pedition XSR CLI - page 640

    AAA Usergroup Commands 16-96 Configuring Security Synt ax of the “no” Form The  no  form  unlinks  a  pool  of  addresses  from  a  group  of  us ers: no ip pool pool-name Mode Usergroup  configuration:  XSR(aaa-group)# Example The  following  example  adds  the  IP  pool  denver : ...

  • Enterasys X-Pedition XSR CLI - page 641

    AAA User Commands XSR CLI Reference Guide 16-97 wins server This  command  sets  the  WINS  serv er  address  which  is  give n  to  connecting  clients  during  connection  time. Synt ax wins server [ primary | secondary ] ip -address Synt ax of the “no” Form The  no  form  of  this  ...

  • Enterasys X-Pedition XSR CLI - page 642

    AAA User Commands 16-98 Configuring Security Synt ax aaa user user-name Synt ax of the “no” Form The  no  form  of  this  command  deletes  the  user  profile: no aaa user user-name Mode Global  configuration:  XSR(config)# Next Mode Username  configuration:  XSR(aaa-user)# Example The  following  ex ...

  • Enterasys X-Pedition XSR CLI - page 643

    AAA User Commands XSR CLI Reference Guide 16-99 ip address This  command  specifies  the  IP  address  to  be  assigned  to  the  remote  user .  If  an  IP  address  is  not  specified,  it  is  taken  from  the  pool  associ ated  with  the  user ʹ s  group ...

  • Enterasys X-Pedition XSR CLI - page 644

    AAA User Commands 16-100 Configuring Security Example The  following  example  sets  the  password  williams  for  user  ted : XSR(config)#aaa user ted XSR(aaa-user)#password williams policy This  command  configures  the  user ʹ s  policy  or  authorized  list  of  services,  and  it ...

  • Enterasys X-Pedition XSR CLI - page 645

    AAA Method Commands XSR CLI Reference Guide 16-101 privilege This  command  configures  the  privilege  level  of  a  user .  It  is  available  from  both  AAA  User  and  AAA  Group  configuration  modes.  Compare  this  command  with  the  Interface  mode  privil ...

  • Enterasys X-Pedition XSR CLI - page 646

    AAA Method Commands 16-102 Configuring Security • client ‐ Configures  the  default  AAA  method  (plug ‐ in)  for  each  client  service.  Refer  to page  16 ‐ 106  for  the  command  definition. • enable - Enables  the  current  AAA  server  for  RADIUS.  Refer ? ...

  • Enterasys X-Pedition XSR CLI - page 647

    AAA Method Commands XSR CLI Reference Guide 16-103 acct-port This  command  specifies  the  UDP  port  for  accounting  requests  and  uses  the  RADIUS  method  only . Synt ax acct-port port-number Synt ax of the “no” Form The  no  form  of  this  command  resets  to  the  de ...

  • Enterasys X-Pedition XSR CLI - page 648

    AAA Method Commands 16-104 Configuring Security Mode AAA  Method  configuration:  XSR(aaa-method-radius)# Example The  following  example  sets  number9  as  the  RADIUS  server  host ‐ name: XSR(config)#aaa method radius ias de fault XSR(aaa-method-radius)#address host- name number9 attempt s This  command ...

  • Enterasys X-Pedition XSR CLI - page 649

    AAA Method Commands XSR CLI Reference Guide 16-105 Synt ax auth-port port-number Synt ax of the “no” Form The  no  form  of  this  command  resets  to  the  default  port  number ‐ 1645: no auth-port Default The  default  authorization  port  numbe r  is  1645. Mode AAA  Method  c ...

  • Enterasys X-Pedition XSR CLI - page 650

    AAA Method Commands 16-106 Configuring Security client This  command  configures  the  default  AAA  me thod  (plug ‐ in)  for  each  client  service.  If  a  client  service  is  not  registered  by  thi s  command,  requests  from  that  service  will  fall  thr ...

  • Enterasys X-Pedition XSR CLI - page 651

    AAA Method Commands XSR CLI Reference Guide 16-107 Default Enabled Mode AAA  Method  configuration:  XSR(aaa-method-radius)# Example The  following  example  enables  the  RADIUS  serv er: XSR(config)#aaa method radius sbr de fault XSR(aaa-method-radius)#enable group This  command  specifies  the  group  ad ...

  • Enterasys X-Pedition XSR CLI - page 652

    AAA Method Commands 16-108 Configuring Security hash enable This  command  enables  the  hash  for  the  plugin  and  is  used  for  the  RADIUS  method  only .  The  sub ‐ command  may  be  a  plugin ‐ type  dependent  command. Synt ax hash enable Synt ax of the “no” Form ...

  • Enterasys X-Pedition XSR CLI - page 653

    AAA Method Commands XSR CLI Reference Guide 16-109 Example The  following  example  resets  the  RADIUS  key  val u e  to  1234qwerty : XSR(config)#aaa method radius defaul t XSR(aaa-method-radius)#key 1234qwert y qtimeout This  command  specifies  the  interval  a  ti meout  request  is  allow ...

  • Enterasys X-Pedition XSR CLI - page 654

    AAA Method Commands 16-110 Configuring Security Default 3 Mode AAA  Method  configuration:  XSR(aaa-method- xx )# Example The  following  example  lengthens  the  retransmit  va l ue  to  5 : XSR(config)#aaa method radius defaul t XSR(aaa-method-radius)#retransmit 5 timeout This  command  specifies  the  ...

  • Enterasys X-Pedition XSR CLI - page 655

    AAA Per-Interface Commands XSR CLI Reference Guide 16-111 AAA Per-Interface Commands aaa-method This  command  is  executed  at  the  Interface  Mode. This  command  specifies  the  name  of  the  AAA  method  yo u  will  use  for  authentication  requests  originating  from  t ...

  • Enterasys X-Pedition XSR CLI - page 656

    AAA Debug and Show Commands 16-112 Configuring Security Synt ax of the “no” Form The  no  form  of  this  command  removes  the  us er/group/interface  re striction: no aaa privilege Mode Interface  configuration:  XSR(config-if<xx># Default Privilege level: 15' Example This  example  resets  ...

  • Enterasys X-Pedition XSR CLI - page 657

    AAA Debug and Show Commands XSR CLI Reference Guide 16-113 AAuthenticatePlugin::queue (alg == 0 xf) groupplugin Reply: Pool = authpool IRMauthorizeMsg::clientLogon [test] The  following  is  a  debug  authentication  message  showing  the  Local  method  failed  with  MSCHAP : Local::queue(test) AAuthenticateP ...

  • Enterasys X-Pedition XSR CLI - page 658

    AAA Debug and Show Commands 16-114 Configuring Security IP Address is: 0.0.0.0 IP Mask is: 0.0.0.0 Primary DNS server is: 0.0.0.0 Secondary DNS server is: 0.0.0.0 Primary WINS server is: 0.0.0.0 Secondary WINS server is: 0.0.0.0 IP pool for the group is: PPTP encryption is 128 bit Access Policy is: firewall Privilege Level is: 0 show aaa user This ...

  • Enterasys X-Pedition XSR CLI - page 659

    Firewall Feature Set Commands XSR CLI Reference Guide 16-115 Default If  the  method ‐ name  is  not  set,  all  methods  and  method  attributes  display . Mode EXEC  or  Global  configuration:  XS R> or XSR(config)# Sample Output The  following  output  is  displayed  by  enterin ...

  • Enterasys X-Pedition XSR CLI - page 660

    Firewall Feature Set Commands 16-116 Configuring Security Synt ax of the “no” Form The  no  form  sets  either  the  timeout  or  Auth  port  to  its  default  va l u e : no ip firewall auth { timeout # | por t # } Default s •T i m e o u t :  1800  seconds • Authentication  port:  3000 Mode ...

  • Enterasys X-Pedition XSR CLI - page 661

    Firewall Feature Set Commands XSR CLI Reference Guide 16-117 Default Disabled  globally Mode Global  or  Interface  configuration:  XSR(config)# or XSR(conf ig-if< xx >)# Example The  following  example  enables  the  fi rewall  globally: XSR(config)#ip firewall enable ip firewall filter This  command  d ...

  • Enterasys X-Pedition XSR CLI - page 662

    Firewall Feature Set Commands 16-118 Configuring Security Default s Deny  all Mode Global  configuration:  XSR(config)# Example The  following  example  permits  any  remote  host  to  run  a  PPTP  tunnel  to  a  server  on  the  internal  network: XSR(config)#ip firewall network pptp ...

  • Enterasys X-Pedition XSR CLI - page 663

    Firewall Feature Set Commands XSR CLI Reference Guide 16-119 Synt ax ip firewall java { all, none, selected network_name } ip firewall activex { all, none, selected network_name } Synt ax of the “no” Form The  no  form  of  this  command  disables  Java  or  ActiveX: no ip firewall java/activex { all , no ne , selecte ...

  • Enterasys X-Pedition XSR CLI - page 664

    Firewall Feature Set Commands 16-120 Configuring Security Synt ax of the “no” Form The  no  form  of  this  command  cancels  a  scheduled  load  and  unlocks  the  firew all  config  CLI: XSR(config)#no ip firewall load dela y Mode Global  configuration:  XSR(config)# Examples The  followin ...

  • Enterasys X-Pedition XSR CLI - page 665

    Firewall Feature Set Commands XSR CLI Reference Guide 16-121 Synt ax ip firewall logging event-threshold 0-7 Synt ax of the “no” Form The  no  form  of  this  command  sets  firew all  logging  to  the  default  va l u e : no ip firewall logging event-thresho ld Default Leve l  3 ‐ All  denies ? ...

  • Enterasys X-Pedition XSR CLI - page 666

    Firewall Feature Set Commands 16-122 Configuring Security Also,  all  firewall  object  names  including  pre ‐ defined  objects  such  as  ANY_EXTERNAL  and  user ‐ defined  object  names  are  case ‐ sensitiv e. Synt ax ip firewall network name { A.B.C.D mask A.B.C.D | A.B .C.D A.B.C.D }{ inte ...

  • Enterasys X-Pedition XSR CLI - page 667

    Firewall Feature Set Commands XSR CLI Reference Guide 16-123 objects  such  as  ANY_EXTERNAL  and  user ‐ defined  object  names  are  case ‐ sensitive.  Refer  to  the  ip firewall policy command  for  applicable  policy  and  gating  rule  limit s. Synt ax ip firewall network-group n ...

  • Enterasys X-Pedition XSR CLI - page 668

    Firewall Feature Set Commands 16-124 Configuring Security Synt ax ip firewall policy policy_name src_net_name dst_net_name se rv_name { allow | allow- log | allow-auth group_name | reject | log | url-b | url-w | cls name ... name }[ before policy_name | after pol icy_name | first ] [ bidirectional ] Synt ax of the “no” Form The  no  form ...

  • Enterasys X-Pedition XSR CLI - page 669

    Firewall Feature Set Commands XSR CLI Reference Guide 16-125 Example The  f ollowing  policy  allows  FT P  access  to  a  host.  Be  aw are  that  the  host’ s  source  IP  address  will  be  authenticated  against  the  group  sales ‐ group . XSR(config)#ip firewall network ...

  • Enterasys X-Pedition XSR CLI - page 670

    Firewall Feature Set Commands 16-126 Configuring Security Synt ax of the “no” Form The  no  form  of  this  command  sets  the  default  RP C  timeout  val u e : no ip firewall rpc timeout Default 5  seconds Mode Global  configuration:  XSR(config)# Example The  following  example  resets  t ...

  • Enterasys X-Pedition XSR CLI - page 671

    Firewall Feature Set Commands XSR CLI Reference Guide 16-127 Synt ax of the “no” Form The  no  form  of  this  command  disables  the  selected  ser vice: no ip firewall service name Mode Global  configuration:  XSR(config)# Example The  following  example  defines  the  FT P  service  (alth ...

  • Enterasys X-Pedition XSR CLI - page 672

    Firewall Feature Set Commands 16-128 Configuring Security ip firewall tcp/ud p timeout This  command  resets  the  idle  timeout  interval  for  Firew all  sessions  applying  TCP  or  UDP  pa cket  inspection.  If  the  Firewall  session  is  idle  for  the  spe cified  per ...

  • Enterasys X-Pedition XSR CLI - page 673

    Firewall Interface Commands XSR CLI Reference Guide 16-129 Examples The  following  examples  configure  va li d  inputs: ip firewall url-load-black-list blac klist.txt ip firewall url-load-black-list flas h:blacklist.txt ip firewall url-load-white-list cfla sh:whitelist.txt Firewall Interface Commands ip firewall disable This  co ...

  • Enterasys X-Pedition XSR CLI - page 674

    Firewall Interface Commands 16-130 Configuring Security Example The  following  example  disables  the  firewa ll  on  FastEthernet  port  2  only: XSR(config-if<F2>)#ip firewall disab le ip firewall ip-broadcast This  command  allows  incoming/outgoing  IP  packets  through  the  firew al ...

  • Enterasys X-Pedition XSR CLI - page 675

    Firewall Interface Commands XSR CLI Reference Guide 16-131 no ip firewall ip-multicast { in | ou t | both } Default Multicast  packets  are  not  allowed  inbound  and  outbound. Mode Interface  configuration:  XSR(config-if<xx>)# Example The  following  example  permits  multicast  packets  in  ...

  • Enterasys X-Pedition XSR CLI - page 676

    Firewall Interface Commands 16-132 Configuring Security no ip firewall ip-options {loose-sou rce-route | strict-source-route | record- route | time-stamp | other | all} {i n | out | both} Default IP  options  are  not  allow ed  inbound  and  outbound. Mode Interface  configuration:  XSR(config-if<xx>)# Example The ...

  • Enterasys X-Pedition XSR CLI - page 677

    Firewall Show Commands XSR CLI Reference Guide 16-133 Example The  following  example  blocks  the  host  when  the  sy nc  packets  exceed  1000  packets  per  second: XSR(config-if<F2>)#ip firewall sync- attack-protect block-host thresho ld 1000 Firewall Show Commands show ip firewall config Since ? ...

  • Enterasys X-Pedition XSR CLI - page 678

    Firewall Show Commands 16-134 Configuring Security Ip firewall policy dmz private SMTP allow ! ! Policies: between dmz and external ! Ip firewall policy ANY_EXTERNAL dmz HTTP allow Ip firewall policy dmz ANY_EXTERNAL HTTP allow Ip firewall policy ANY_EXTERNAL dmz SMTP allow Ip firewall policy dmz ANY_EXTERNAL SMTP allow ! ! Policy: Allow any from p ...

  • Enterasys X-Pedition XSR CLI - page 679

    Firewall Show Commands XSR CLI Reference Guide 16-135 Mode EXEC or Privileged EXEC Mode: XSR> or XSR# Sample Output The  following  output  display s  Filter Source Destination Protocol ICMP Bi/Log Name Network Network Name/Number Type noICMP dmz private ICMP N/A Y/N show ip firewall network This  static  counter  shows  ...

  • Enterasys X-Pedition XSR CLI - page 680

    Firewall Show Commands 16-136 Configuring Security Sample Output The  output  below  displays  netw ork  objects  for  the  Private ‐ network  and  Partner ‐ networks  groups.  Note  that  only  member  obje cts  names  are  shown. Yo u  can  enter  the  show ip firewall netwo ...

  • Enterasys X-Pedition XSR CLI - page 681

    Firewall Show Commands XSR CLI Reference Guide 16-137 Mode EXEC or Privileged EXEC Mode: XSR> or XSR# Sample Output The  following  output  display s  firew all  service  group  data: Name Service objects all-my-tcp-services my-ftp my-telnet show ip firewall policy This  static  counter  displays  all  policy ...

  • Enterasys X-Pedition XSR CLI - page 682

    Firewall Show Commands 16-138 Configuring Security Mode EXEC or Privileged EXEC Mode: XSR> or XSR# Default If  no  options  are  specified  all  sessions  are  display ed. Sample Output The  following  sample  output  displays  current  firew all  sessions: XSR#show ip firewall sessions icmp Source Ad ...

  • Enterasys X-Pedition XSR CLI - page 683

    Firewall Show Commands XSR CLI Reference Guide 16-139 Sample Output The  following  sample  output  displays  summary  statistics: Overall Firewall Status: Enabled Protected Interfaces: FastEthernet2 Unprotected Interfaces: FastEthernet1 Session Information ------------------------------------ -------------------- active peak bloc ...

  • Enterasys X-Pedition XSR CLI - page 684

    Firewall Show Commands 16-140 Configuring Security Mode EXEC or Privileged EXEC Mode: XSR> or XSR# Example The  following  is  sample  output  from  the  command: show ip firewall urLlist Black URLs from File: blacklist.tx t 1. www.cisco.com 2. www.playboy.com 3. readme.eml 4. amber.cl White URLs from File: NOT LOADED Redire ...

Manufacturer Enterasys Category Router

Documents that we receive from a manufacturer of a Enterasys X-Pedition XSR CLI can be divided into several groups. They are, among others:
- Enterasys technical drawings
- X-Pedition XSR CLI manuals
- Enterasys product data sheets
- information booklets
- or energy labels Enterasys X-Pedition XSR CLI
All of them are important, but the most important information from the point of view of use of the device are in the user manual Enterasys X-Pedition XSR CLI.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Enterasys X-Pedition XSR CLI, service manual, brief instructions and user manuals Enterasys X-Pedition XSR CLI. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Enterasys X-Pedition XSR CLI.

Similar manuals

A complete manual for the device Enterasys X-Pedition XSR CLI, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Enterasys X-Pedition XSR CLI by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Enterasys X-Pedition XSR CLI.

A complete Enterasys manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Enterasys X-Pedition XSR CLI - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Enterasys X-Pedition XSR CLI, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Enterasys X-Pedition XSR CLI, that we can find in the current document
3. Tips how to use the basic functions of the device Enterasys X-Pedition XSR CLI - which should help us in our first steps of using Enterasys X-Pedition XSR CLI
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Enterasys X-Pedition XSR CLI
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Enterasys X-Pedition XSR CLI in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Enterasys X-Pedition XSR CLI?

Use the form below

If you did not solve your problem by using a manual Enterasys X-Pedition XSR CLI, ask a question using the form below. If a user had a similar problem with Enterasys X-Pedition XSR CLI it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)