English dropdown-ico

Manual Canon 8469B009

174 pages 3 mb
Download

Go to site of 174

Summary
  • Canon 8469B009 - page 1

    Wi-Fi Function Instruction Manual E INSTRUCTION MANUAL EOS 70D (W) C OP Y ...

  • Canon 8469B009 - page 2

    2 This camera’s wireless LAN functions let you perform a range of tasks wirelessly , from sending images to Web services and other cameras to controlling the camer a remotely , simply by connecting to a Wi-Fi ® network or other devi ce supporting this camer a’s wireless LAN function s. What You Can Do Us ing the Wireless LAN Functions (1) Tran ...

  • Canon 8469B009 - page 3

    3 What You Can Do Using the Wireless LAN Functions (1) z T ransfer images betwee n cameras (p.19) T ransfer images between this camera and other Canon cameras with built-in wireless LAN functions. (2) q Connect to a smartphone (p.31, 75) View saved images or operate the camera from your smartphone. Install the dedicated application “EOS Remote” ...

  • Canon 8469B009 - page 4

    4 Wi-Fi Function Flowchart z T ransfer images between cameras q Connect to a smartphone Set up another Canon camera with built-in wireless LAN functions Install EOS Remote on a smartphone Connect the cameras directly via a wireless LAN • Camera access point mode* 1 • Infrastructure mode* 2 Transfer images between cameras • View images on the ...

  • Canon 8469B009 - page 5

    5 Wi-Fi Function Flowchart *1 Camera access point mode: A simple wireless LAN mode where a came ra and smartphone, or a camera and printer can be directly connected via a wireless LAN. *2 Infrastructure mode: A wireless LAN mode that connects to each Wi-Fi device via a wireless LAN access point. In this mode, communication to a distant Wi-Fi device ...

  • Canon 8469B009 - page 6

    6 In this manual, the term “wireless LAN” is used as a general term for Wi-Fi and Canon’s original wire less communication functions. The term “access point” indicates wireless LAN termin als (wireless LAN access points or wireless LAN adapters) that relay wireless LAN connection. Brackets [ ] indicate buttons or icon names or other softw ...

  • Canon 8469B009 - page 7

    7 Chapters Introduction 2 Basic Settings for Wireless LAN Functions 11 T ransferring Images Between Cameras 19 Connecting to a Smartphone - 1 31 Printing Images Using a Wi-Fi Printer - 1 45 Using a Wi-Fi Wireless LAN Access Point 55 Connecting to a Smartphone - 2 75 Printing Images Using a Wi-Fi Printer - 2 87 Remote Operation Using EOS Utility 93 ...

  • Canon 8469B009 - page 8

    8 2 1 3 4 Introduction 2 What You Can Do Using the Wireless LAN Functions ..................... 2 Wi-Fi Function Flowchart .... .............................................................. 4 Conventions Used in This Manual ........... ......................................... 6 Chapters ................. ........................................ . ...

  • Canon 8469B009 - page 9

    9 Contents 5 6 7 8 9 Using a Wi-Fi Wireless LAN Access Point 55 Checking the Type of Access Point ....... ............................... .......... 56 Easy Connection via WPS (PBC Mode) ..... ..................... ............... 57 Easy Connection via WPS (PIN Mode) ..... ..................... ................. 62 Manual Connection by Searching N ...

  • Canon 8469B009 - page 10

    Contents 10 12 10 11 13 14 Manual Connection by Searching Netw orks ................ ................ 115 Sending Images to a Web Service ....... ........................................ 120 Reconnecting ........... .................................................................... 126 Registering Multiple Connection Setti ngs .................. ...

  • Canon 8469B009 - page 11

    11 Basic Settings for Wireless LAN Functions This chapter describes settin gs necessary for using the camera’s wireless LAN functions. C OP Y ...

  • Canon 8469B009 - page 12

    12 First, set the camera’s nickname. When the camera is connected to another device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname for your camera. 1 Select [Wi-Fi]. Under the [ 5 3 ] tab, select [ Wi-Fi ], then press < 0 >. 2 Select [Enable]. Press the < V > key to select [ Enable ], then ...

  • Canon 8469B009 - page 13

    13 Registering a Nickname 4 Enter a nickname. For instructions on entering characters, see “Virtual Keyboard Operation” on the next page. Up to 16 characters can be entered. 5 Finish. When you are finished, press the < M > button. Select [ OK ] on the confirmation screen, then press < 0 >. The nickname is registered, and the [ Wi- F ...

  • Canon 8469B009 - page 14

    Registering a Nickname 14 Switching to other input areas T o switch between top and bottom input areas, press the < Q > button. Moving the cursor T o move the cursor , press the < U > key in the top area. Entering text In the bottom input area, press the < V > or < U > key to select characters and press < 0 > to enter ...

  • Canon 8469B009 - page 15

    15 When you want to prioritize wireless LAN functions, do not operate the shutter button, Mode Dial, or playback button. Otherwise, shooting or playback operation may be prioritized and wireless LAN functions may be terminated during the process. Also, the connection may be terminated when the LCD monitor is closed facing inward. When [ Wi-Fi ] in ...

  • Canon 8469B009 - page 16

    Basic Operation and Settings 16 Settings and connection status for [ Wi-Fi ] under the [ 5 3 ] tab can be checked on the camera’s LCD monitor and LCD panel. [Wi-Fi] Settings and Connection Status Wi-Fi connection status Wi-Fi function Wi-Fi function LCD monitor LCD panel Wi-Fi function Wi-Fi connection status W i-Fi function When [Wi-Fi] is set t ...

  • Canon 8469B009 - page 17

    17 Basic Operation and Settings Y ou can operate wireless LAN functi ons by touching the screen as well. For details, refer to “Using the T ouc h Screen” in the Camera Instruction Manual. Touch Control Connecting with an Interface Cable When [ 5 3: Wi-Fi ] is set to [ Enable ], interface cable connection is disabled. Set it to [ Disable ] to co ...

  • Canon 8469B009 - page 18

    18 MEMO C OP Y ...

  • Canon 8469B009 - page 19

    19 Transferring Images Between Cameras Images can be transferred between Canon cameras via the built-in wireless LAN functions. Wireless connection is possible for Canon cameras with built-in wireless LAN functions marketed in 2012 or later . Note that the camera cannot be connected to Canon camcorders, even if they have built-in wire less LAN func ...

  • Canon 8469B009 - page 20

    20 Register the target camera to c onnect to via a wireless LAN. The camera can be connected to only one camera at a time. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Press the < V > or < U > key to select [ z ] (T ransfer imgs between cameras), then pres ...

  • Canon 8469B009 - page 21

    21 Selecting the Connection Destination 4 Select the images to send. Select images on t he camera sending the images (p.22). Do not operate the camera receiving the images. Note that GPS information is not displa yed on the camera’s playback screen even if GPS information is appended to the received image. Shooting locations can be viewed on a vi ...

  • Canon 8469B009 - page 22

    22 Selected images are sent one by one. 1 Select an image to send. Press the < U > key to select an image to send, then press < 0 >. Y ou can also press the < I > button to select an image in the index display . T o return to the single-image display , press the < u > button. 2 Select [Send img shown]. T o select a size at w ...

  • Canon 8469B009 - page 23

    23 Sending Images Multiple images can be selected and sent. 1 Press < 0 >. 2 Select [Send selected]. T o select a size at which to send the images, select [ Resize image ] and press < 0 >. Press the < U > key to select [ Send selected ], then press < 0 >. 3 Select the images to send. Press the < U > key to select the i ...

  • Canon 8469B009 - page 24

    Sending Images 24 4 Reduce the image size. Set it if necessary . For the setting procedures, see the next page. 5 Send the image s. Press the < V > key to select [ Send ], then press < 0 > to send the images. X The transfer progress screen is displayed. T o send another image, repeat steps 1 to 5. 6 T erminate connection . Press the < ...

  • Canon 8469B009 - page 25

    25 Sending Images When [ Send selected ] is selected, the confirmation screen for sending images also lets you select the size at which to send them. 1 Select [Resize images to send]. On the confirmation screen for sending images, press the < V > key to select [ Resize images to send ], then press < 0 >. 2 Select the image size. Press t ...

  • Canon 8469B009 - page 26

    26 The camera can reconnect to anot her camera for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press ...

  • Canon 8469B009 - page 27

    27 Y ou can register up to three camera connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. ...

  • Canon 8469B009 - page 28

    28 The names displayed for reconnection settings can be changed after the settings are completed. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Select [Review/change settings]. Select [ Review/chang ...

  • Canon 8469B009 - page 29

    29 Changing Setting Names 5 Change the setting name. Change the name of the setting using the virtual keyboard (p.14). Up to 30 characters can be entered. When you are finished, press the < M > button. Select [ OK ] on the confirmation screen and press < 0 > to complete the change. C OP Y ...

  • Canon 8469B009 - page 30

    30 MEMO C OP Y ...

  • Canon 8469B009 - page 31

    31 Connecting to a Smartphone - 1 Connecting the camera to a smartphone lets you use the smartphone to view , ma nage, and receive images stored in the camera. Y ou ca n also use the smartphone to perform remote shooting. Note that movie shooting is disabled. C OP Y ...

  • Canon 8469B009 - page 32

    32 T o communicate with a smartphone, the camera needs to be connected to the smartphone using the dedicated application EOS Remote. EOS Remote can be downloaded fr om the App S tore or Google Play . Install EOS Remote on t he smartphone and then perform the procedures to establish the connection. T o use EOS Remote, a smartphone on which iOS or An ...

  • Canon 8469B009 - page 33

    33 The camera and smartphone can be directly connected via a wireless LAN. Because the camera acts as an access point, no other access point is necessary , so you can establish commu nications easily even when you are out. T o establish connection, operatio ns on the smartphone are required. For details, refer to the sm artphone instruction manual. ...

  • Canon 8469B009 - page 34

    Using Camera Access Point Mode to Establish a Connection 34 5 Connect the smartphone to the camera. On the Wi-Fi settings menu of the smartphone, select the SSID (network name) displayed on the camera’s LCD monitor . For the password, enter the encryption key displayed on the camera’s LCD monitor . X The next screen may be automatically display ...

  • Canon 8469B009 - page 35

    35 Using Camera Access Point Mode to Establish a Connection 9 Connect to the cam era. When pairing is completed, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. T o specify viewable images (p.40), press the < B > button. 10 Perform further settings. T o finish settings in this stage, pr ...

  • Canon 8469B009 - page 36

    Using Camera Access Point Mode to Establish a Connection 36 If you have selected [ Manual connection ] in step 4 on page 33, set [ SSID ], [ Channel setting ], and [ Encryption settings ] on each screen displayed. 1 Enter an SSID. Enter any character using the virtual keyboard (p.14). When you are finished, press the < M > button. 2 Select [A ...

  • Canon 8469B009 - page 37

    37 Y ou can use a smartphone with EOS Remote installed to view images stored in the camera and shoot remotely . The main functions of EOS Remote are described below . T ouch the screen to learn the operation procedures. [Camera Image Viewing] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operat ...

  • Canon 8469B009 - page 38

    Operating the Camera Using a Smartphone 38 1 Select [ E xit]. If the screen on the left is not displayed, select [ Wi-Fi funct ion ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [ OK]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Conne ction JPEG and RA W i ...

  • Canon 8469B009 - page 39

    39 The camera can reconnect to a smartphone for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 > ...

  • Canon 8469B009 - page 40

    40 Y ou can specify images viewable fr om a smartphone by operating the camera. Images can be specified durin g connection settings or after the connection is terminated. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < ...

  • Canon 8469B009 - page 41

    41 Specifying Viewable Images 5 Select an item. Press the < V > key to select an item, then press < 0 >. Select [ OK ] and press < 0 > to display the setting screen. [All images] All images stored on the card become viewable. [Images from pa st days] S pecify viewable images on the shooting-date basis. Images shot up to nine days ...

  • Canon 8469B009 - page 42

    Specifying Viewable Images 42 [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1 Press the < U > key to select the first image to be set viewable. 2 Press < 0 > to display the image selection screen. Select an image using the < U > key , < ...

  • Canon 8469B009 - page 43

    43 Y ou can register up to three smartphone connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele ...

  • Canon 8469B009 - page 44

    44 MEMO C OP Y ...

  • Canon 8469B009 - page 45

    45 4 Printing Images Using a Wi-Fi Printer - 1 Y ou can directly pri nt images by connecting the camera with a wireless LAN compatible printer supporting PictBridge (Wireless LAN) via a wireless LAN. Images can be printed by connecting this camera wi th a printer by PictBridge via a wireless LAN. PictBridge is a standard for easily printing im ages ...

  • Canon 8469B009 - page 46

    46 The camera and a printer can be dire ctly connected via a wireless LAN. Because the camera acts as an access point, no other access point is necessary , so you can print images easily no matter where you are. T o connect via a Wi-Fi access point, see “Using a Wi-Fi Wireless LAN Access Point” (p.55). 1 Select [Wi-Fi function]. Under the [ 5 3 ...

  • Canon 8469B009 - page 47

    47 Using Camera Access Point Mode to Establish a Connection 5 Set the printer ’ s W i-Fi settings to connect to the camera. On the Wi-Fi settings menu of the printer to be used, select the SSID (network name) displayed on the camera’s LCD monitor . For the password, enter the encryption key displayed on the camera’s LCD monitor . For the prin ...

  • Canon 8469B009 - page 48

    Using Camera Access Point Mode to Establish a Connection 48 7 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 8. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 chara ...

  • Canon 8469B009 - page 49

    49 Using Camera Access Point Mode to Establish a Connection If you have selected [ Manual connection ] in step 4 on page 46, set [ SSID ], [ Channel setting ], and [ Encryption settings ] on each screen displayed. 1 Enter an SSID. Enter any character using the virtual keyboard (p.14). When you are finished, press the < M > button. 2 Select [A ...

  • Canon 8469B009 - page 50

    50 Play back an image. Press the < x > button. X An image is displayed and the < w > icon appears on the upper left of the screen indicating that the printer is connected. For further operations, refer to “Printing Images” in the Camera Instruction Manual. Y o u can also perform “Direct Printing of Print- Ordered Images”. 1 Sele ...

  • Canon 8469B009 - page 51

    51 The camera can reconnect to a prin ter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 > ...

  • Canon 8469B009 - page 52

    52 Y ou can register up to three printer connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele ...

  • Canon 8469B009 - page 53

    53 MEMO C OP Y ...

  • Canon 8469B009 - page 54

    54 MEMO C OP Y ...

  • Canon 8469B009 - page 55

    55 Using a Wi-Fi Wireless LAN Access Point Connecting to a Wi-Fi wire less LAN access point gives you access to the following functions: • Connecting to a smartphone • Printing images using a Wi-Fi printer • Remote operation using EOS Utility • Sending images to a Web service* • Viewing images using a media player * T o send images to a W ...

  • Canon 8469B009 - page 56

    56 When Wi-Fi Protected Setup (WPS) is supported • p.57: Easy Connection via WPS (PBC Mode) • p.62: Easy Connection via WPS (PIN Mode) When WPS is not supported • p.67: Manual Connection by Searching Networks If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. ...

  • Canon 8469B009 - page 57

    57 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. Note that if multiple access points ar e active in the surrounding area, it may be more diff ...

  • Canon 8469B009 - page 58

    Easy Connection via WPS (PBC Mode) 58 3 Select [Infrastructure mode]. Displayed when [ q ] or [ l ] is selected. Go to step 4 when selecting [ D ] or [ ]. Press the < V > key to select [ Infrastructure mode ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 4 Select [WPS (PBC mode)]. Press the < V > ...

  • Canon 8469B009 - page 59

    59 Easy Connection via WPS (PBC Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically . ...

  • Canon 8469B009 - page 60

    Easy Connection via WPS (PBC Mode) 60 This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page that introduces the selected communication method. Connecting to a Smartphone: Chapter 6 (p.75) Printing Images Using a Wi-Fi Printer: Chapter 7 (p.87) Specifying Setting ...

  • Canon 8469B009 - page 61

    61 Easy Connection via WPS (PBC Mode) Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these operations ...

  • Canon 8469B009 - page 62

    62 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identif ication number specified on the camera is set at the access point to establish a connection. Even if there are multiple access points active in the surrounding area, a relatively ...

  • Canon 8469B009 - page 63

    63 Easy Connection via WPS (PIN Mode) 4 Select [WPS (PIN mode)]. Press the < V > key to select [ WPS (PIN mode) ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Specify the PIN code at the access point. At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor . For ins ...

  • Canon 8469B009 - page 64

    Easy Connection via WPS (PIN Mode) 64 [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically . ...

  • Canon 8469B009 - page 65

    65 Easy Connection via WPS (PIN Mode) This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page that introduces the selected communication method. Connecting to a Smart phone: Chapter 6 (p.75) Printing Images Using a Wi-Fi Printer: Chapter 7 (p.87) Specifying Settin ...

  • Canon 8469B009 - page 66

    Easy Connection via WPS (PIN Mode) 66 Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these operations ...

  • Canon 8469B009 - page 67

    67 When [ Find network ] is selected, a list of active access points nearby is displayed, accompanied by info rmation about them. Select the SSID (or ESS-ID) of the access point to connect to. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select an item. Select either [ q ] [ D ] [ ...

  • Canon 8469B009 - page 68

    Manual Connection by Searching Networks 68 5 Select an access point. Press < 0 > to enable the selection of an access point. Press the < V > key to select an access point, then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen (p.69). (1) Indicates whether th e device is in infrastructure or ad hoc mode (2) ...

  • Canon 8469B009 - page 69

    69 Manual Connection by Searching Networks Go to the next page when the [ IP address set. ] screen is displayed. Set the encryption key specified for the access point. For details on the specified encryption key , refer to t he access point’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentic ...

  • Canon 8469B009 - page 70

    Manual Connection by Searching Networks 70 Press the < V > key to select how the IP address should be set, then press < 0 >. [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environment s using DHCP servers, or access points or routers with DHCP server funct ...

  • Canon 8469B009 - page 71

    71 Manual Connection by Searching Networks If you are not sure what to enter , see “Checking Network Settings” (p.166), or ask the network adm inistrator or another person knowledgeable about the network. This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page ...

  • Canon 8469B009 - page 72

    Manual Connection by Searching Networks 72 Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these opera ...

  • Canon 8469B009 - page 73

    73 MEMO C OP Y ...

  • Canon 8469B009 - page 74

    74 MEMO C OP Y ...

  • Canon 8469B009 - page 75

    75 Connecting to a Smartphone - 2 Connecting the camera to a smartphone lets you use the smartphone to view , ma nage, and receive images stored in the camera. Y ou ca n also use the smartphone to perform remote shooting. Note that movie shooting is disabled. These instructions should be followed only after the smartphone is connected to an access ...

  • Canon 8469B009 - page 76

    76 These instructions are continued from Chapter 5. T o establish connection, operatio ns on the smartphone are required. For details, refer to the smar tphone’s instruction manual. T o connect in the camera access point mode, see “Using Camera Access Point Mode to Establish a Connection” (p.33). 1 St art EOS Remote on the smartphone. When th ...

  • Canon 8469B009 - page 77

    77 Using Infrastructure Mode to Establish a Connection 4 Connect to the cam era. When pairing is completed, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. T o specify viewable images (p.81), press the < B > button. 5 Perform further settings. T o finish settings in this stage, press th ...

  • Canon 8469B009 - page 78

    78 Y ou can use a smartphone with EOS Remote installed to view images stored in the camera and shoot remotely . The main functions of EOS Remote are described below . T ouch the screen to learn the operation procedures. [Camera Image Viewing] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operat ...

  • Canon 8469B009 - page 79

    79 Operating the Camera Using a Smartphone 1 Select [E xit]. If the screen on the left is not displayed, select [ Wi-F i function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [O K]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Connection JPEG and RA W ima ...

  • Canon 8469B009 - page 80

    80 The camera can reconnect to a smartphone for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 > ...

  • Canon 8469B009 - page 81

    81 Y ou can specify images viewable fr om a smartphone by operating the camera. Images can be specified durin g connection settings or after the connection is terminated. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < ...

  • Canon 8469B009 - page 82

    Specifying Viewable Images 82 5 Select an item. Press the < V > key to select an item, then press < 0 >. Select [ OK ] and press < 0 > to display the setting screen. [All images] All images stored on the card become viewable. [Images from pa st days] S pecify viewable images on the shooting-date basis. Images shot up to nine days ...

  • Canon 8469B009 - page 83

    83 Specifying Viewable Images [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1 Press the < U > key to select the first image to be set viewable. 2 Press < 0 > to display the image selection screen. Select an image using the < U > key , < ...

  • Canon 8469B009 - page 84

    84 Y ou can register up to three smartphone connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele ...

  • Canon 8469B009 - page 85

    85 MEMO C OP Y ...

  • Canon 8469B009 - page 86

    86 MEMO C OP Y ...

  • Canon 8469B009 - page 87

    87 7 Printing Images Using a Wi-Fi Printer - 2 Y ou can directly pri nt images by connecting the camera with a wireless LAN compatible printer supporting PictBridge (Wireless LAN) via a wireless LAN. These instructions sho uld be followed only after the printer is connected to an access point. For information about settings and config uration, refe ...

  • Canon 8469B009 - page 88

    88 These instructions are continued from Chapter 5. T o connect in camera access point mode, see “Using Camera Access Point Mode to Establish a Connection” (p.46). 1 Select the printer to connect to. When a list of detected printers is displayed, select the printer to connect to and press < 0 >. X Some printers may make a beeping sound. W ...

  • Canon 8469B009 - page 89

    89 Using Infrastructure Mode to Establish a Connection 3 Save the settings. Select [ OK ] and press < 0 > to save the settings. X The [ l Connection ] screen will be displayed. T o return to the menu, press the < M > button. The settings for networking with the printer are now complete. C OP Y ...

  • Canon 8469B009 - page 90

    90 Play back an image. Press the < x > button. X An image is displayed and the < w > icon appears on the upper left of the screen indicating that the printer is connected. For further operations, refer to “Printing Images” in the Camera Instruction Manual. Y o u can also perform “Direct Printing of Print- Ordered Images”. 1 Sele ...

  • Canon 8469B009 - page 91

    91 The camera can reconnect to a prin ter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 > ...

  • Canon 8469B009 - page 92

    92 Y ou can register up to three printer connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele ...

  • Canon 8469B009 - page 93

    93 Remote Operation Using EOS Utility Y ou can perform remote oper ation using EOS Utility via a wireless LAN. In addition to remote shooting, various camera operations are av ailable because a wireless LAN is used instead of an interface cable. Note that movie shooting is disabled. These instructions should be followed only after the computer with ...

  • Canon 8469B009 - page 94

    94 These instructions are continued from Chapter 5. With EOS Utility , you can use the prov ided Pairing Software to establish a connection between the camera and a computer . Pairing Software is installed automatically during “easy inst allation” of the software provided with the camera. If it is not inst alled, install it on the computer to b ...

  • Canon 8469B009 - page 95

    95 Configuring EOS Utility Communication Settings 2 St art the pairing sof t ware. S tart the pairing sof tware on the computer . Normally , it is installed in the same location as EOS Utility . X After the pairing sof tware starts up, an icon is displayed on the task bar . X When the camera is detected, a message is displayed. 3 Double-click the p ...

  • Canon 8469B009 - page 96

    Configuring EOS Utility Communication Settings 96 5 Select [OK]. When the camera detects the computer on which you clicked [ Connect ] in step 4, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. 6 Perform further settings. T o finish settings in this stage, press the < V > key to select ...

  • Canon 8469B009 - page 97

    97 Configuring EOS Utility Communication Settings There is no need to complete pair ing again if you will continue using a particular camera and computer together after p airing without changing the settings. T o reconnect to the same computer , simply turn on the camera and start the p airing software. The connection between the camera and compute ...

  • Canon 8469B009 - page 98

    98 For EOS Utility instructions, refer to the EOS Utility instruction manual (CD-ROM). In addition to remote shooting, various camera operations are available. Note that movie shooting is disabled. 1 Select [Exit]. If the screen on the left is not displayed, select [ Wi-Fi function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 S ...

  • Canon 8469B009 - page 99

    99 The camera can reconnect to a comp uter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ D ]. Select [ D ] (Remote control (EOS Utility)) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < ...

  • Canon 8469B009 - page 100

    100 Y ou can register up to three EOS Utility connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ D ]. Select [ D ] (Remote control (EOS Utility)) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecifi ...

  • Canon 8469B009 - page 101

    101 MEMO C OP Y ...

  • Canon 8469B009 - page 102

    102 MEMO C OP Y ...

  • Canon 8469B009 - page 103

    103 Sending Images to a Web Service Y ou can register various We b services on the camera and send images stored in the camera to them. CANON iMAGE GA TEWA Y Web serv ices are not supported in certain countries and areas. Fo r information on countries and areas supporting CANON iMAGE GA TEWA Y services, refer to the Canon Web site (http://canon.com ...

  • Canon 8469B009 - page 104

    104 T o send images to Web services, you need to sign up as a CANON iMAGE GA TEWA Y member (free of charge). Once you are a CANON iMAGE GA TEWA Y member, you can publish photos you took in online albums and use a range of services. This Web site also serves as a bridge to s end images wirelessly from the camera or for sending links to the online al ...

  • Canon 8469B009 - page 105

    105 Preparation The general procedu re for sending images to a W eb ser vice is as follo ws. 1 Prepare a computer on which EOS Utility h as been inst alled. Use the software CD-ROM provided with the camera to install EOS Utility . 2 Access Canon Web site from the computer and sign up as a CANON iMAGE GA TEW A Y member (free of charge). If you are a ...

  • Canon 8469B009 - page 106

    106 When Wi-Fi Protected Setup (WPS) is supported • p.107: Easy Connection via WPS (PBC Mode) • p.1 1 1: Easy Connection via WPS (PIN Mode) When WPS is not supported • p.1 15: Manual Connection by Searching Networks If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other document ...

  • Canon 8469B009 - page 107

    107 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. Note that if multiple access points ar e active in the surrounding area, it may be more dif ...

  • Canon 8469B009 - page 108

    Easy Connection via WPS (PBC Mode) 108 3 Select a Web service. Select a Web service to connect to, then press < 0 >. The contents and ordering of the list of items displayed will vary depending on settings. The Web service to connect to can be changed later (p.126). X When the [ Send to ] screen (p.125) is displayed, select a destination and ...

  • Canon 8469B009 - page 109

    109 Easy Connection via WPS (PBC Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers ,or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically ...

  • Canon 8469B009 - page 110

    Easy Connection via WPS (PBC Mode) 110 7 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 8. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters can be entered ...

  • Canon 8469B009 - page 111

    111 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identif ication number specified on the camera is set at the access point to establish a connection. Even if there are multiple access points active in the surrounding area, a relatively ...

  • Canon 8469B009 - page 112

    Easy Connection via WPS (PIN Mode) 112 4 Select [WPS (PIN mode)]. Press the < V > key to select [ WPS (PIN mode) ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Specify the PIN code at the access point. At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor . For in ...

  • Canon 8469B009 - page 113

    113 Easy Connection via WPS (PIN Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically ...

  • Canon 8469B009 - page 114

    Easy Connection via WPS (PIN Mode) 114 8 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 9. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters can be entered ...

  • Canon 8469B009 - page 115

    115 When [ Find network ] is selected, a list of active access points nearby is displayed, accompanied by info rmation about them. Select the SSID (or ESS-ID) of the access point to connect to. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ w ]. Select [ w ] (Upload to Web s ...

  • Canon 8469B009 - page 116

    Manual Connection by Searching Networks 116 4 Select [Find network]. Press the < V > key to select [ Find network ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Select an access point. Press < 0 > to enable the selection of an access point. Press the < V > key to select an access point, ...

  • Canon 8469B009 - page 117

    117 Manual Connection by Searching Networks Go to the next page when the [ IP address set. ] screen is displayed. Set the encryption key specified for the access point. For details on the specified encryption key , refer to t he access point’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authenti ...

  • Canon 8469B009 - page 118

    Manual Connection by Searching Networks 118 Press the < V > key to select how the IP address should be set, then press < 0 >. [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server func ...

  • Canon 8469B009 - page 119

    119 Manual Connection by Searching Networks If you are not sure what to enter , see “Checking Network Settings” (p.166), or ask the network adm inistrator or another person knowledgeable about the network. 1 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to s ...

  • Canon 8469B009 - page 120

    120 Y ou can share movies and still photos you shot by sending them to a Web service registered on the camera such as CANON iMAGE GA TEWA Y . Sent images are saved in an online album on CANON iMAGE GA TEWA Y and a link to the album is sent to each Web service. It is also possible to send images to Web services directly depending on the selected Web ...

  • Canon 8469B009 - page 121

    121 Sending Images to a Web Service A [ T erms of use ] screen is displayed when sending images to certain W eb services. Thoroughly read the terms of use, press the < U > key to select [ I Agree ], then press < 0 >. The screen can be scrolled up and down by pressing the < V > key . If playback or shooting operation is started du ...

  • Canon 8469B009 - page 122

    Sending Images to a Web Service 122 Multiple images can be selected and sent. 1 Press < 0 >. 2 Select [Send selected]. T o select a size at which to send the images, select [ Resize image ] and press < 0 >. Press the < U > key to select [ Send selected ], then press < 0 >. 3 Select the images to send. Press the < U > k ...

  • Canon 8469B009 - page 123

    123 Sending Images to a Web Service 4 Reduce the image size. Set it if necessary . For the setting procedures, see the next page. When Y ouT ube is selected as the destination, [ Resize images to send ] is not displayed. 5 Send the im ages. Press the < V > key to select [ Send ], then press < 0 >. X The transfer progress screen is displ ...

  • Canon 8469B009 - page 124

    Sending Images to a Web Service 124 When [ Send selected ] is selected, the confirmation screen for sending images also lets you select the size at which to send them. 1 Select [Resize images to send]. On the confirmation screen for sending images, press the < V > key to select [ Resize images to send ], then press < 0 >. 2 Select the i ...

  • Canon 8469B009 - page 125

    125 Sending Images to a Web Service Y ou can send links to posted image s to registered destinations. T o register Email destinations and settings for sending Emails, you must use a computer . For more information, refer to the EOS Utility Instruction Manual (CD-ROM). When [ ] (Email) is selected on the [ Upload to Web service ] screen, the [ Send ...

  • Canon 8469B009 - page 126

    126 The camera can reconnect to a Web service for which connection settings have been registered. The c onnection to the access point only has to be established once. Y ou do not need to establish a new connection for each Web service. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 S ...

  • Canon 8469B009 - page 127

    127 Y ou can register up to three W eb service connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ w ]. Select [ w ] (Upload to Web service) and press < 0 >. 3 Select a Web service. Select a Web service and press < 0 >. X When the [ Send to ] scre ...

  • Canon 8469B009 - page 128

    Registering Multiple Connection Settings 128 5 Select [Unspecified]. Select [ Unspecified ] and press < 0 >. X The connection settings screen is displayed. Follow the procedures displayed to complete the connection settings. C OP Y ...

  • Canon 8469B009 - page 129

    129 MEMO C OP Y ...

  • Canon 8469B009 - page 130

    130 MEMO C OP Y ...

  • Canon 8469B009 - page 131

    131 Viewing Images Using a Media Player Images on a card in the camera can be viewed on a TV set via a wireless LAN. This function requires a DLNA*-compatible TV set, game machine, smartphone, or other media player . In this manual, the term “media pl ayer” is used to refer to any such device. * DLNA: Digital Living Network Alliance These instr ...

  • Canon 8469B009 - page 132

    132 These instructions are continued from Chapter 5. 1 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 2. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters c ...

  • Canon 8469B009 - page 133

    133 Images on the card in the camera c an be displayed on a TV set using a media player . Note that RA W im ages and movies cannot be displayed. The following operations must be per formed on the media player . For details, refer to the media player’s instruction manual. 1 Display the media player settings screen on your TV set. Using the media p ...

  • Canon 8469B009 - page 134

    Displaying Images on a TV set 134 1 Select [Exit]. If the screen on the left is not displayed, select [ Wi-Fi function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [OK]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Connection Information overlay and detai ...

  • Canon 8469B009 - page 135

    135 The camera can reconnect to a medi a player for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ ]. Select [ ] (View images on DLNA devices) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < ...

  • Canon 8469B009 - page 136

    136 Y ou can register up to three media player connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ ]. Select [ ] (View images on DLNA devices) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. ...

  • Canon 8469B009 - page 137

    137 MEMO C OP Y ...

  • Canon 8469B009 - page 138

    138 MEMO C OP Y ...

  • Canon 8469B009 - page 139

    139 Using Quick Control to Connect to a Wireless LAN Quick Control or Quick Cont rol during playback lets you connect to a wireless LAN using registered connection destination settings. Connection destination settings cann ot be set using Quick Control. Set connection destination se ttings from the menu screen. C OP Y ...

  • Canon 8469B009 - page 140

    140 Y ou can use Quick Control to ac cess Wi-Fi functions for which connection destination settings have been registered. Three functions are available in Quick Control: [ q ] (Connect to smartphone), [ D ] (Remote control (EOS Utility)), and [ ] (View images on DLNA devices). Set the Mode Dial to the Creative Zone before using these functions. 1 S ...

  • Canon 8469B009 - page 141

    141 Y ou can also use Quick Control during playback to access Wi-Fi functions for which connection destination settings have been registered. From Quick Control duri ng playback, two functions can be used: [ z ] (T ransfer images between cameras) and [ w ] (Upload to Web service). 1 Press the < Q > button. While an image is displayed, press t ...

  • Canon 8469B009 - page 142

    Connecting from a Playback Screen 142 3 Select the item to connect to. Select the item to connect to and press < 0 >. Items for which connection destination settings have not been registered are grayed out. X When you select [ w ] (Upload to Web service), a screen to select a Web service is displayed. Select the item to connect to and press & ...

  • Canon 8469B009 - page 143

    143 MEMO C OP Y ...

  • Canon 8469B009 - page 144

    144 MEMO C OP Y ...

  • Canon 8469B009 - page 145

    145 Managing Settings C OP Y ...

  • Canon 8469B009 - page 146

    146 Check the network settings as follows. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select the item to check settings for . Press the < V > or < U > key to select an item, then press < 0 >. When you select [ w ], a screen to select a Web service is displayed. ...

  • Canon 8469B009 - page 147

    147 Checking or Changing Settings When the Connection Has Been T erminated Select the connection destination, select [ Review/change settings ], then press < 0 >. Select [ Confirm set. ] and press < 0 > to display the settings. C OP Y ...

  • Canon 8469B009 - page 148

    Checking or Changing Settings 148 T o change settings, select [ Change set. ] on the [ Review/change settings ] screen shown on page 147. X A screen for setting connection is displayed. Configure connection settings again following the procedures. T o change the name of the settings, select [ Change settings name ] on the [ Review/change settings ] ...

  • Canon 8469B009 - page 149

    149 All wireless LAN settings can be deleted by the procedure described below . By deleting the wireless LAN settings, you can prevent them from being exposed when you lend or give your camera to other people. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Press the < B > butto ...

  • Canon 8469B009 - page 150

    150 MEMO C OP Y ...

  • Canon 8469B009 - page 151

    151 Troubleshooting Guide Tr ansfer speed in ad hoc mode may become extremely slow when the camera is used with certai n types of computer . For more information, contact your dealer or nearest Canon Service Center . C OP Y ...

  • Canon 8469B009 - page 152

    152 When < k > or < l > on the LCD panel blinks, display the error content following one of the procedures below. Then, eliminate the cause of the error referring to t he examples shown in this chapter. Select [ 5 3: Wi-Fi function ] 9 [ General sett. ] 9 [ Error details ], then press < 0 >. Select [ 5 3: Wi-Fi function ] and pres ...

  • Canon 8469B009 - page 153

    153 Responding to Error Messages In the case of [ q ], is EOS Remote running? X Establish a connection using EOS Remote (p.37, 78). In the case of [ l ], is the power of the printer on? X T urn on the printer . In the case of [ D ], is the pairing sof tware running? X S t art the p airing sof tware and follow the instructions to re-establish the co ...

  • Canon 8469B009 - page 154

    Responding to Error Messages 154 Is the DHCP server working correctly? X Check the DHCP server settings to make sure it is working correctly as a DHCP server . X If applicable, ask your network admin istrator to ensure the DHCP server is available. What to check on the camera On the camera, does the DNS server ’ s IP address setting match the ser ...

  • Canon 8469B009 - page 155

    155 Responding to Error Messages What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask your network administrator for the network gateway address and enter it on t he camera (p.59, 64, 70, 109, 1 13, 1 18, 166). X Make sure that the gateway addr ess setting is cor ...

  • Canon 8469B009 - page 156

    Responding to Error Messages 156 Are any obstacles blocking the line of sight between the camera and the antenna of the access point? X Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.164). What to check on the camera Does the SSID set on the camera match that of the access point? X Check t ...

  • Canon 8469B009 - page 157

    157 Responding to Error Messages Are the camera and the access point set to use the same authentication method? X The camera supports the fo llowing authentication methods: [ Open system ], [ Shared key ], [ WP A-PSK ], and [ WP A2-PSK ] (p.68, 1 16). X When using an AirPort for communication in infrastructure mode, [ Open system ] is not supported ...

  • Canon 8469B009 - page 158

    Responding to Error Messages 158 The wireless LAN connection w as lost, for some reason, and the connection cannot be restored. X The following are possible reason s: excessive access to the access point from other device, a microwave oven or similar appliance in use nearby (interfering with IEEE 802.1 1b/g/n (2.4 GHz band)), or influence of rain o ...

  • Canon 8469B009 - page 159

    159 Responding to Error Messages Connection is in progress by ot her access points in Pushbutton Connection mode (PBC mode) of Wi-Fi Protected Setup (WPS). X W ait a while before trying to establish the connection, or try to establish a connection in PIN code connection mode (PIN mode) (p.62, 1 1 1). A problem other than error number 1 1 to 69 occu ...

  • Canon 8469B009 - page 160

    Responding to Error Messages 160 Check if the folder number of the camera to receive data is 999 and the file number 9999. X Folder or file names cannot be created automatically . Replace the card in the camera to receive dat a, then try sending the data again. Is the card working properly? X Replace the card in the camera to receive data, then try ...

  • Canon 8469B009 - page 161

    161 Responding to Error Messages Has the target camera terminated the connection? X Check the connection status and connect the cameras again. A problem other than those described in errors 101 through 108 occurred during the connection between cameras. X Connect the cameras again. The target W eb server does not have enough free space. X Delete un ...

  • Canon 8469B009 - page 162

    Responding to Error Messages 162 Is the network connected? X Check the connection status of the network. CANON iMAGE GA TEW A Y is under maintenance or load is concentrated temporarily . X T ry connecting to the Web service again later . A problem other than error 121 to 126 occurred during the connection to the Web service. X T ry connecting to th ...

  • Canon 8469B009 - page 163

    163 If a problem occurs with the camera, first refer to this T roubleshooting Guide. If this T roubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center . Set [ 5 3: Wi-Fi ] to [ Disable ]. If [ Wi-Fi ] is set to [ Enable ], even when the camera is connected to a computer , printer , GPS receiver , or ot ...

  • Canon 8469B009 - page 164

    164 If the transmission rate drops, the c onnection is lost, or other problems occur when using the camera with a wireless LAN, try the following corrective actions. When using indoors, install the de vice in the same room that you are shooting. Install the device higher than the camera. Install the device where people or objects do not come betwee ...

  • Canon 8469B009 - page 165

    165 Wireless LAN Notes Wireless LAN radio waves can be easily intercepted. For this reason, we recommend activating encrypted communication in the access point settings. When [ 5 3: Wi-Fi ] is set to [ Enable ], interface cable connection is disabled. Set it to [ Disable ] and then connect an interface cable. When the camera is connected to a compu ...

  • Canon 8469B009 - page 166

    166 Click the Windows [ Start ] button 9 [ All Programs ] 9 [ Accessories ] 9 [ Command Prompt ]. T ype ipconfig/all and press the < Enter > key . The IP address assigned to the computer is displayed, as well as the subnet mask, gateway , and DNS server information. T o avoid using the same IP addre ss for the computer and other devices on th ...

  • Canon 8469B009 - page 167

    167 MEMO C OP Y ...

  • Canon 8469B009 - page 168

    168 MEMO C OP Y ...

  • Canon 8469B009 - page 169

    169 Reference C OP Y ...

  • Canon 8469B009 - page 170

    170 9 Wireless LAN S tandards compliance: IEEE 802.1 1b/g/n T r an smission method: DS-SS modulation (IEEE 802.1 1b) OFDM modulation (IEEE 802.1 1g/n) T r an smission range: A pprox. 30 m/98.4 ft. * With no obstructions between th e tran smitting and receiving antennas and no radio interference * With a large, high-perfor mance antenna attached to ...

  • Canon 8469B009 - page 171

    171 A Access point encryption .......... 68, 116 Android................. .....................32, 55 Auto power off .. ..................... .......... 15 C Cable.................... ................. ..........17 Camera access point mode ......33, 46 CANON iMAGE GA TEWA Y ..........104 Changing setting names ......... 28, 148 Changing settings .. ...

  • Canon 8469B009 - page 172

    172 Index T T ouch control .... ................. ............. 17 T ransferring images between cameras ................. ......................... 19 T roubleshooting Gu ide ................. 151 V Viewable images.... ................... 40, 81 Viewing images...... ....................... 131 W Wi-Fi printer ...... ..................... ... 45, 87 ...

  • Canon 8469B009 - page 173

    MEMO C OP Y ...

  • Canon 8469B009 - page 174

    CPY-E059-001 © C ANON INC. 2013 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan U.S.A. CANON U.S.A. INC. http://www .usa.canon.com/eos http://www .usa.canon.com/support For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontari ...

Manufacturer Canon Category Digital Camera

Documents that we receive from a manufacturer of a Canon 8469B009 can be divided into several groups. They are, among others:
- Canon technical drawings
- 8469B009 manuals
- Canon product data sheets
- information booklets
- or energy labels Canon 8469B009
All of them are important, but the most important information from the point of view of use of the device are in the user manual Canon 8469B009.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Canon 8469B009, service manual, brief instructions and user manuals Canon 8469B009. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Canon 8469B009.

Similar manuals

A complete manual for the device Canon 8469B009, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Canon 8469B009 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Canon 8469B009.

A complete Canon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Canon 8469B009 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Canon 8469B009, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Canon 8469B009, that we can find in the current document
3. Tips how to use the basic functions of the device Canon 8469B009 - which should help us in our first steps of using Canon 8469B009
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Canon 8469B009
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Canon 8469B009 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Canon 8469B009?

Use the form below

If you did not solve your problem by using a manual Canon 8469B009, ask a question using the form below. If a user had a similar problem with Canon 8469B009 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)