English dropdown-ico

Manual Husqvarna 362XP, 365, 371XP

36 pages 1.48 mb
Download

Go to site of 36

Summary
  • Husqvarna 362XP, 365, 371XP - page 1

    Operator´ s manual 101 90 43-26 362XP/3 65/3 7 1 X P Please read these instructions carefully and make sure you understand them before using the saw. ...

  • Husqvarna 362XP, 365, 371XP - page 2

    2 – English Symbols on the chain sa w: CAUTION! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the instructions carefully and make sure you understand them before using the saw. Always wear: • Approved protective helmet • Approved hearing protection • Prote ...

  • Husqvarna 362XP, 365, 371XP - page 3

    English – 3 CONTENTS Contents Key to symbols ........................................................ 2 Safety instructions Personal protective equipment ........................................ 4 Chain saw safety equipment ........................................... 4 Inspecting, maintaining and servicing chain saw safety equipment ............. ...

  • Husqvarna 362XP, 365, 371XP - page 4

    4 – English ! CHAIN SA W SAFETY EQUIPMENT This section explains the various safety features of the saw, how they work, and basic inspection and maintenance you should carry out to ensure safe operation. (See the ”What is what?” section to find out where these components are on Your saw). NEVER USE A CHAIN SAW THAT HAS FAULTY SAFETY EQUIPMENT! ...

  • Husqvarna 362XP, 365, 371XP - page 5

    English – 5 1 Chain brake and front hand guard YOUR chain saw is equipped with a chain brake that is desig- ned to stop the chain immediately if you get a kickback. The chain brake reduces the risk of accidents, but only You can prevent them. Take care when using your saw and make sure the kickback zone of the bar never touches any object. 1 The ...

  • Husqvarna 362XP, 365, 371XP - page 6

    6 – English 6 The way the chain brake is triggered, either manually or automatically, depends on the force of the kickback and the position of the chain saw in relation to the object that the kickback zone of the bar strikes. If you get a violent kickback while the kickback zone of the bar is farthest away from you the chain brake will be activat ...

  • Husqvarna 362XP, 365, 371XP - page 7

    English – 7 ! 5 Vibration damping system Your chain saw is equipped with a vibration damping system that is designed to minimise vibrations and make operation easier. When you use a chain saw vibrations are generated by the uneven contact between the chain and the wood you are cutting. Cutting hardwoods (most broadleaf trees) creates more vibrati ...

  • Husqvarna 362XP, 365, 371XP - page 8

    8 – English ! 3 Checking the inertia brake release Hold the chain saw over a stump or other firm object. Let go of the front handle so that the bar falls onto the stump. When the bar hits the stump the brake should be applied. Inspecting, maintaining and servicing chain sa w safety equipment SPECIAL TRAINING IS REQUIRED to service and repair chai ...

  • Husqvarna 362XP, 365, 371XP - page 9

    English – 9 SAFETY INSTR UCTIONS 4 Right hand guard Check that the right hand guard is not damaged and that there are no visible defects, such as cracks. 5 Vibration damping system Regularly check the vibration damping units for cracks or deformation Make sure the vibration damping units are securely attached to the engine unit and handles. 6 Sto ...

  • Husqvarna 362XP, 365, 371XP - page 10

    10 – English ! 7 Muffler Never use a chain saw that has a faulty muffler. Regularly check that the muffler is securely attached to the chain saw. If the muffler on your saw is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage. Never use a muffler if th ...

  • Husqvarna 362XP, 365, 371XP - page 11

    English – 11 ! SAFETY INSTR UCTIONS C Some terms that describe the bar and chain When the cutting equipment supplied with your saw becomes worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” section to find out which equipment is recommended for your saw. Bar • LENGTH ( ...

  • Husqvarna 362XP, 365, 371XP - page 12

    12 – English SAFETY INSTR UCTIONS ! 2 Sharpening your chain and adjusting raker clearance The risk of kickback is increased with a badly sharpened chain! A General information on sharpening cutting teeth • Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be ...

  • Husqvarna 362XP, 365, 371XP - page 13

    English – 13 ! C General advice on setting raker clearance • When you sharpen the cutting teeth you reduce the RAKER CLEARANCE (cutting depth). To maintain cutting performance you must file back the raker teeth to the recommended height. See the ”Technical data” section to find the raker clearance for your saw chain. • On a low-kickback c ...

  • Husqvarna 362XP, 365, 371XP - page 14

    14 – English 1 Undo the bar nuts that hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can. 2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it hangs slack on the underside of the bar. ...

  • Husqvarna 362XP, 365, 371XP - page 15

    English – 15 C Checking chain lubrication • Check the chain lubrication each time you refuel. Aim the tip of the saw at a light coloured surface about 20 cm away. After 1 minute running at 3/4 throttle you should see a distinct line of oil on the light surface. If the chain lubrication is not working: 1 Check that the oil channel in the bar is ...

  • Husqvarna 362XP, 365, 371XP - page 16

    16 – English H Bar Check regularly: • Whether there are burrs on the edges of the bar. Remove these with a file if necessary. • Whether the groove in the bar has become badly worn. Replace the bar if necessary. • Whether the tip of the bar is uneven or badly worn. If a hollow forms on one side of the bar tip this is due to a slack chain. ? ...

  • Husqvarna 362XP, 365, 371XP - page 17

    English – 17 ! 6 Take great care when you cut with the top edge of the bar, i.e. when cutting from the underside of the object. This is known as cutting on the push stroke. The chain tries to push the saw back towards the user. Unless the user resists this pushing force there is a risk that the saw will move so far backwards that only the kickbac ...

  • Husqvarna 362XP, 365, 371XP - page 18

    18 – English SAFETY INSTR UCTIONS GENERAL SAFETY PRECAUTIONS 1 Chain saws are designed solely for cutting wood. The only cutting equipment that can be used with this chain saw are the combinations of bars and chains recommended in the ”Technical data” section. 2 Never use a chain saw if you are tired, if you have drunk alcohol, or if you are ...

  • Husqvarna 362XP, 365, 371XP - page 19

    English – 19 ! SAFETY INSTR UCTIONS GENERAL W ORKING INSTRUCTIONS This section describes basic safety rules for using a chain saw. This information is no substitute for professional skills and experience. If you get into a situation where you feel unsafe, stop and seek expert advice (look under FORESTRY SERVICES in the telephone directory). DO NO ...

  • Husqvarna 362XP, 365, 371XP - page 20

    20 – English ! SAFETY INSTR UCTIONS Two factors decide whether the chain will jam or the log will split. The first is how the log is supported and the second is whether it is in tension. In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom of the log. You need to support the log so that it will not ...

  • Husqvarna 362XP, 365, 371XP - page 21

    English – 21 SAFETY INSTR UCTIONS 2 The log is supported at one end. There is a high risk that it will split. A Start by cutting from below (about 1/3 of the way through). B Finish by cutting from above so that the two cuts meet. 3 The log is supported at both ends. There is a high risk that the chain will jam. A Start by cutting from above (abou ...

  • Husqvarna 362XP, 365, 371XP - page 22

    22 – English SAFETY INSTR UCTIONS C Clearing the trunk and preparing your retreat Remove any branches that are in the way. To do this it is best to work from the top down and keep the trunk between you and the chain saw. Never limb above shoulder height. Remove any undergrowth from the base of the tree and check the area for obstacles (stones, br ...

  • Husqvarna 362XP, 365, 371XP - page 23

    English – 23 ! We recommend that you use a bar that is longer than the diameter of the tree, so that you can make the FELLING CUT and DIRECTIONAL CUT with single cutting stokes. (See ”Technical data” to find out which lengths of bar are recommended for your saw). There are methods for felling trees with a diameter larger than the bar length. ...

  • Husqvarna 362XP, 365, 371XP - page 24

    24 – English WHA T IS WHA T? What is what? 1. Cylinder cover. 2. Front handle. 3. Front hand guard. 4. Starter cover. 5. Chain oil tank. 6. Starter handle. 7. Adjuster screw, carburettor. 8. Choke control/Start throttle lock. 9. Rear handle. 10. Stop switch. Ignition on/off switch. 11. Fuel tank. 12. Muffler. 13. Bar tip sprocket. 14. Saw chain. ...

  • Husqvarna 362XP, 365, 371XP - page 25

    English – 25 ! Mounting guide bar and chain Always wear gloves, when working with the chain, in order to protect your hands from injury. Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle. Take off the bar nuts and remove the clutch cover. Take off the transportation ring (A). ASSEMBL Y Ho ...

  • Husqvarna 362XP, 365, 371XP - page 26

    26 – English Mixing • Always mix the petrol and oil in a clean container intended for fuel. • Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly before filling the saw’s fuel tank. ? ...

  • Husqvarna 362XP, 365, 371XP - page 27

    English – 27 ! FUEL HANDLING Fuelling Taking the following precautions, will lessen the risk of fire. • Do not smoke or place warm objects in the vicinity of the fuel. • Always shut off the engine before refuelling. • Slowly open the fuel cap, when filling fuel, so that possible overpressure is slowly released. • Tighten the fuel cap care ...

  • Husqvarna 362XP, 365, 371XP - page 28

    28 – English ! Start and stop WARNING! • Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clutch can come loose and cause personal injuries. • Always move the saw away from the fueling area before starting. • Place the saw on clear ground and make sure that the chain is not contacting ...

  • Husqvarna 362XP, 365, 371XP - page 29

    English – 29 ! • Now start the saw according to the starting instructions and run it warm for 10 minutes. NOTE! If the chain rotates the T screw should be turned anti-clockwise until the chain stops. • Place the saw on a flat surface so that the bar points away from you and so that the bar and chain do not come into contact with the surface o ...

  • Husqvarna 362XP, 365, 371XP - page 30

    30 – English Starter device WARNING! • When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries. • Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection. ! MAINTENANCE Changing a broken or ...

  • Husqvarna 362XP, 365, 371XP - page 31

    English – 31 Air filter The air filter must be regularly cleaned from dust and dirt in order to avoid: • Carburettor malfunctions • Starting problems • Engine power reduction • Unnecessary wear on the engine parts • Abnormal fuel consumption Clean the air filter daily or more often if the air is exceptionally dusty in the working area. ...

  • Husqvarna 362XP, 365, 371XP - page 32

    32 – English MAINTENANCE Cooling system To obtain the lowest possible running temperature the saw is equipped with a cooling system. The cooling system consists of: 1. Air intake on the starter unit. 2. Air guide plate. 3. Fan blades on the flywheel. 4. Cooling fins on the cylinder. 5. Cylinder cowling (supplies cold air over the cylinder). Clean ...

  • Husqvarna 362XP, 365, 371XP - page 33

    English – 33 Below you will find some general maintenance instructions. If you have more questions, contact your servicing dealer. W eekly maintenance 1. Check that the AV elements are not soft or torn. 2. Lubricate the clutch drum bearing. 3. File off burrs, if any, on the sides of the bar. 4. Clean the spark plug and check the gap. The correct ...

  • Husqvarna 362XP, 365, 371XP - page 34

    34 – English Engine Cylinder volume, cu.in/cm 3 Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Recommended max. speed, unloaded, rpm Power, kW/ rpm Ignition system Manufacture Type of ignition system Spark plug Electrode gap, inch/mm Fuel and lubrication system Manufacturer Carburettor type Fuel capacity, US pint/litre Oil pump capacity a ...

  • Husqvarna 362XP, 365, 371XP - page 35

    English – 35 Bar and chain combinations The following combinations are CE approved. Bar Chain Length, Pitch, Max. inches inches tip radius 365/ 15 3/8 11T Husqvarna H42 371XP 16 3/8 11T Husqvarna H42 18 3/8 11T Husqvarna H42 20 3/8 11T Husqvarna H42 24 3/8 11T Husqvarna H42 28 3/8 11T Husqvarna H42 362XP 13 0,325 10T Husqvarna H25 15 0,325 10T Hu ...

  • Husqvarna 362XP, 365, 371XP - page 36

    1999W25 ´*3$@¶6ߨ ...

Manufacturer Husqvarna Category Chainsaw

Documents that we receive from a manufacturer of a Husqvarna 362XP, 365, 371XP can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 362XP, 365, 371XP manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 362XP, 365, 371XP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 362XP, 365, 371XP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 362XP, 365, 371XP, service manual, brief instructions and user manuals Husqvarna 362XP, 365, 371XP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 362XP, 365, 371XP.

Similar manuals

A complete manual for the device Husqvarna 362XP, 365, 371XP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 362XP, 365, 371XP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 362XP, 365, 371XP.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 362XP, 365, 371XP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 362XP, 365, 371XP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 362XP, 365, 371XP, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 362XP, 365, 371XP - which should help us in our first steps of using Husqvarna 362XP, 365, 371XP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 362XP, 365, 371XP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 362XP, 365, 371XP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 362XP, 365, 371XP?

Use the form below

If you did not solve your problem by using a manual Husqvarna 362XP, 365, 371XP, ask a question using the form below. If a user had a similar problem with Husqvarna 362XP, 365, 371XP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)