Manual Leica MZ16

76 pages 3.23 mb
Download

Go to site of 76

Summary
  • Leica MZ16 - page 1

    Leica M Stereo- microscopes User Manual ...

  • Leica MZ16 - page 2

    ...

  • Leica MZ16 - page 3

    3 Leica M Stereomicroscopes User Manual Dear User Thank you for choosing our products. W e hope that you will en- joy the quality and performance of Leica Microsystems products. In developing our instruments, we have placed great emphasis on simple, self-explanatory directions. In order to utilize all the benefits of your new stereomicroscope, we s ...

  • Leica MZ16 - page 4

    Leica M Stereomicroscopes User Manual T able of contents 4 Page Overview Safety concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Controls and functions . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Leica MZ16 - page 5

    5 Page Illuminators T ransformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Incident lamp 6 V/10 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Incident lamp 6 V/20 W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Cold light sources . . . . . . . . . . ...

  • Leica MZ16 - page 6

    Read the user manual and safety instructions before starting up. The Leica MS5, MZ6, MZ7 5 , MZ9 5 , MZ12 5, MZ16 and MZ16 A stereomicro- scopes are optical instruments which use magnification for improved visualization of objects, their details and specimens from technology and natural sciences. The basic outfit, which includes a stand and a light ...

  • Leica MZ16 - page 7

    7 Leica M Stereomicroscopes – Safety regulations Repairs may only be carried out by Leica-trained service tech- nicians. Only original Leica spare parts may be used. • Ensure that personnel who use the instrument have read and understood this user manual and in particular the safety instructions. • Ensure that the Leica MS5, MZ6, MZ7 5 , MZ9 ...

  • Leica MZ16 - page 8

    Liquids Power cables Cable routing Opening the instrument Supply voltage Connections Changing bulbs 8 Leica M Stereomicroscopes – Safety regulations Electrically-operated items The safety regulations listed below apply to the following items: – T ransmitted-light stand, bright field, 20 W (page 24) – Supply (line) lamp 25 W (page 47) – Regu ...

  • Leica MZ16 - page 9

    The following must be observed if Leica products are build into third-party products: The manufacturer of the complete system or the person putting it on the market is responsible for adhering to applicable safety regulations, laws and guidelines. Adhere to general and local regulations relating to accident prevention and environmental protection. ...

  • Leica MZ16 - page 10

    Stereomicroscope 1 Magnification changer 2 Engaging ratchet positions 3a Focusing drive 3b Coarse and fine focusing Larger knob: Coarse focusing, Smaller knob: Fine focusing. 3c Adjustable ring Changes the ease of movement of the coarse/fine drive. 4 Clamping screw Holds the optics carrier in the microscope carrier . 5 Clamping screw Holds the bino ...

  • Leica MZ16 - page 11

    11 Leica M Stereomicroscopes – Overview Leica design by Ernest Igl/Christophe Apothéloz Leica MZ9 5 7 5 4 6 2 1 3c 3b 8 Leica MZ7 5 7 5 4 6 2 1 3c 3b 8 Leica MZ12 5 7 5 10 4 6 2 1 3c 3b 8 Leica MZ16 7 5 10 11 4 6 9 1 2 3b 3c 8 ...

  • Leica MZ16 - page 12

    Magnification changer • Zoom means continuous change of magnification. Ratchets can be engaged for certain magnifications (see below). • For zooming with MZ16 A, see the user manual M2-116-0. MS5: 5 steps MZ6: 6:1 zoom MZ7 5 : 7.9:1 zoom MZ9 5 : 9.5:1 zoom MZ12 5 : 12.5:1 zoom MZ16 and MZ16 A: 16:1 zoom • The magnification changer can be oper ...

  • Leica MZ16 - page 13

    MS5, MZ6: Display of magnification factors from 0.63–4. MZ7 5 : Display of magnification factors from 0.63–5. Corresponding scales for other objective and eyepiece combi- nations can be affixed to the rotary knobs (page 34). MZ9 5 : Display of magnification factors from 0.63–6. MZ12 5 : Display of magnification factors from 0.8–10. MZ16, MZ ...

  • Leica MZ16 - page 14

    14 Leica M Stereomicroscopes – Operation Ergonomics, viewing height • Pay great attention when setting up your stereomicroscope. Y ou will only benefit fully from the outstanding optical and ergonomic advantages of the instrument if you set it up precisely in accordance with the directions already given. • For fatigue-free work, use the ErgoM ...

  • Leica MZ16 - page 15

    – ErgoWedge™ 5° – 25° – ErgoWedge™ ±15° – ErgoModule™ 50 mm – The ErgoT ube™ 45° has eyepiece tubes which are 65 mm longer than the standard ones. Magnification factor 1.6 × . MZ16 A: The magnification factor can be toggled on and off using the OPT key . – ErgoModule™ 30 – 120 mm Relubrication may be required after sev ...

  • Leica MZ16 - page 16

    Y ou do not wear glasses and prefer close contact with 10 × /21B wide-field eyepieces for persons wearing glasses: 왘 Holding the diopter ring, turn the eyecup counterclockwise until it is released. 왘 Pull the eyecup upwards. 왘 Holding the diopter ring, turn the eyecup clockwise. Persons wearing glasses need the whole of the available distanc ...

  • Leica MZ16 - page 17

    17 Leica M Stereomicroscopes – Operation 왘 Place the object beneath the objective. 왘 Engage the lowest magnification (page 12). 왘 Look into the eyepieces. 왘 Using the rotary knob, bring the object into focus. The coarse/fine drive supports up to 15 kg. – Resolution with 5 kg load: 1 µm – Resolution with 10 kg load: 2 µm 왘 Focus ap ...

  • Leica MZ16 - page 18

    Microscope carrier • This microscope carrier permits only stereoscopic observation, using both beam paths. • The microscope carrier can be fitted to the drive housing in either of two positions (see page 34): • The optics carrier can be turned sideways in the microscope carrier if the user needs to work from the side: 왘 Release the clamping ...

  • Leica MZ16 - page 19

    The parallax-free imaging produces more precise results in photography , measuring and polarization. 왘 Shift the stereomicroscope to the left or the right position. The object is now located directly beneath either the left or the right beam path. • When photographing or measuring, se- lect the beam path above which the pho- totube or measuring ...

  • Leica MZ16 - page 20

    20 Leica M Stereomicroscopes – Operation Adjusting diopter settings and parfocality Leica stereomicroscopes are parfocally matched. This means that, once you have focused on a feature in the manner de- scribed, taking account of diopter settings, you can zoom the magnification up and down without refocusing. Y ou only need to refocus if you want ...

  • Leica MZ16 - page 21

    4. Engage the highest magnification position. 5. Optimize the focus using the focusing drive. 6. Engage the lowest magnification position. 7. Do not look into the eyepieces. 왘 Rotate the eyepieces counterclockwise in the "+" direction as far as the stop (+5 diopters). 8. Look into the eyepieces 왘 Slowly rotate each eyepiece individual ...

  • Leica MZ16 - page 22

    The components 1a Incident-light base with stage plate 1b T ransmitted-light base with glass stage plate 2a Side-faced column with drive housing, coarse/fine 2b Side-faced column with drive housing, 300 mm or 500 mm 3 Microscope carrier 4 Optics carrier 5 Interchangeable objective 6 Binocular tube 7 Wide-field eyepiece for spectacle wearers, with e ...

  • Leica MZ16 - page 23

    23 Leica M Stereomicroscopes – Assembly Stand Incident-light stand 왘 Remove the stage plate. 왘 Insert 3 Allen screws into the underside of the baseplate and secure them to the bottom end of the side-faced column. 왘 Insert the stage plate. T o fit the microscope carrier and the stereomicroscope, see page 34 T ransmitted-light stand Pull the ...

  • Leica MZ16 - page 24

    T ransmitted-light stand, bright field, 20 W Follow the safety instructions given on page 7. 왘 Fit the side-faced column to the transmitted-light base as described on page 23. Never touch the bulb when it is hot. Y ou may sustain burns. • Do not touch the new 6 V/20 W halogen bulb directly with your fingers, because finger marks can cause it to ...

  • Leica MZ16 - page 25

    Use: – T wo 160 mA T fuses for voltages between 200–240 V . – T wo 315 mA T fuses for voltages between 100–120 V (see the section "Starting up" on the left). 왘 Disconnect the power cable from the stand. 왘 Pull out the fuse holder . 왘 Fuse at rear: Press out downwards. 왘 Spare fuse at front: Pull out sideways and insert int ...

  • Leica MZ16 - page 26

    T ransmitted-light stand, bright and dark field The illumination of the transmitted-light stand bright and dark field consists of a fiber -optic light guide and a light source. Observe the safety regulations from the manufacturer of the light source. 왘 Unplug the fiber -optic light guide from the connection in the stand. 왘 Fit the side-faced co ...

  • Leica MZ16 - page 27

    T ransmitted-light stand HL The column seat contains Allen screws. 왘 Remove the glass stage plate. 왘 Invert the transmitted-light base and place it on a table. 왘 Hold column against the column seat from underneath. 왘 Insert the Allen screws into the column from the top and tighten them. 왘 Invert the transmitted-light base and insert the g ...

  • Leica MZ16 - page 28

    Swinging-arm stand ESD The swinging-arm stand ESD is of conducting material (surface resistance <10 11 Ohm/squared, discharge time <2 seconds from 1,000 V to 100 V). T wo sockets for connecting ∅ 4 mm ground cables are provided on the base. 왘 Insert 4 Allen screws into the base from beneath and secure them to the end of the column. The sa ...

  • Leica MZ16 - page 29

    The focusing knobs are located on the inclinable drive housing. Is the focus movement too loose or too tight? Does the outfit tend to slide downwards? Y ou can adjust the movement in accordance with the weight of the outfit and with your own personal requirements: 왘 Hold the drive knobs firmly with both hands and turn them in opposite direc- tion ...

  • Leica MZ16 - page 30

    Large swinging-arm and table-clamp stands 왘 Use the clamp to secure the column to a table top 20 mm – 50 mm thick. 왘 Insert 4 Allen screws into the base from beneath and secure them to the end of the column. The safety ring secures the instrument and must always be positioned beneath the horizontal arm. 왘 Position the safety ring with the s ...

  • Leica MZ16 - page 31

    왘 Secure as described on page 34. 왘 Secure as described on page 34. Possible adjustments 왘 Release the clamping lever . 왘 T ilt the instrument. 왘 Retighten the clamping lever . 왘 Set large distances with the larger knob. 왘 Fine-focus with the smaller (concentric) knob. 왘 Using the ring on the right-hand drive knob, adjust the ease o ...

  • Leica MZ16 - page 32

    10 445 614 MZ6 10 411 589 1x 10 422 562 1.5x 10 447 081 2x 10 473 832 0.8x 10 445 201 0.63x 10 422 563 0.5x 10 422 564 0.32x Achromat M1-105-MZ16 / 01.04 10 446 371 MZ7 5 10 446 272 MZ9 5 10 447 102 MZ16 10 447 103 MZ1 6 A 10 445 613 MS5 10 446 172 10 411 589 1x 10 422 562 1.5x 10 447 081 2x 10 473 832 0.8x 10 445 201 0.63x 10 422 563 0.5x 10 422 5 ...

  • Leica MZ16 - page 33

    33 Leica M Stereomicroscopes User Manual Objective combinations C Compatible CA Compatible if used with intermediate ring (order separately) 0 Intermediate ring is recommended M Magnification increased by factor 1.25 × or higher * Remove intermediate ring (10 446 393); already included with MZ9 5 . (C) Large fields of view at low magnifications ar ...

  • Leica MZ16 - page 34

    Microscope carrier The microscope carrier can be attached to the focusing drive in 2 positions: • For short working distances and for flat objects, use Position 1. Use this position also in conjunction with the attachment for vertical and oblique observation (see detailed in- structions). • Use Position 2 for long working distances and for bulk ...

  • Leica MZ16 - page 35

    35 Leica M Stereomicroscopes – Assembly Binocular tube 왘 Release the clamping screw . • If you have an accessory such as an ergo module (page 14), a coaxial illumi- nator (page 47) or a video/phototube (page 52), fit it now to the optics carrier . T ighten the clamping screw. 왘 T ilt the binocular tube and insert the edge of its dovetail ri ...

  • Leica MZ16 - page 36

    Objective nosepiece • Suggested for Leica MZ16 and MZ16 A Please note: When using the objective nosepiece together with MS5, MZ6, MZ7 5 , MZ9 5 or MZ12 5 large fields of view at low magnifications are not fully illuminated. – Hold objectives during assembly and disassembly to prevent them from falling on the stage plate. This applies particular ...

  • Leica MZ16 - page 37

    왘 Carefully turn and tighten the 2 × planapochromatic objective clockwise to the limit stop without applying excessive force. 왘 Raise the focusing drive with the drive heads to provide sufficient space for the 2 × planapochro- matic objective. 왘 Fit the objective nosepiece like a microscope car- rier with the Allen screw (see page 34, posit ...

  • Leica MZ16 - page 38

    T ransformers Follow the safety instructions given on page 7. Leica transformers may only be opened by authorized service personnel, and the power cable must be disconnected before- hand. The transformers are not to be used outdoors. Regulating transformer The regulating transformer 5.3 to 7.5 V/40 V A is used to operate the 6 V/10 W and 6 V/20 W l ...

  • Leica MZ16 - page 39

    Y ou can prolong the life of your bulb if you: 왘 First switch off the lamp by turning the rotary knob into the black range 왘 and only then switch the transformer on or off. 왘 T urn on the power switch. The diode is illuminated. 왘 Use the rotary knob to adjust the brightness. Above 6 V the diode is illuminated. Fuses 1.0A, 5 × 20 (stock no. ...

  • Leica MZ16 - page 40

    6 V/10 W incident lamp • The 6 V/10 W lamp is an inclined incident source for illuminating spatial objects • By using two lamps, you can soften or eliminate shadows. • At the nominal voltage (6 V), the color temperature is 2700 K. 왘 Release the clamping screw . 왘 Unfold the lampholder arm. 왘 Retighten the clamping screw . 왘 Use the sc ...

  • Leica MZ16 - page 41

    Observe the safety notes on page 7. Observe the notes with respect to the use of the trans- former on page 38. 왘 Connect the cable between the lamp housing and the transformer (page 38). 왘 Switch on the transformer and use the rotary knob to adjust the brightness (page 39). 왘 Hold the lamp housing and release the clamping screw . 왘 Align th ...

  • Leica MZ16 - page 42

    42 Leica M Stereomicroscopes – Illuminations 6 V/20 W incident lamp • The 6 V/20 W lamp is an inclined incident source for illuminating spatial objects. • By using two lamps, you can soften or eliminate shadows. • At the nominal voltage (6 V), the color temperature is 3200 K, ideal for photography . Set the regulating transformer to this no ...

  • Leica MZ16 - page 43

    43 Leica M Stereomicroscopes – Illuminations Observe the safety notes on page 7. Observe the notes with respect to the use of the transformer on page 38. 왘 Connect the cable between the lamp housing and the trans- former (page 38). 왘 Switch on the transformer and use the rotary knob to adjust the brightness. 왘 Push the condenser lens forwar ...

  • Leica MZ16 - page 44

    44 Leica M Stereomicroscopes – Illuminations Disconnect the lamp cable from the transformer . Never touch the bulb when it is hot. Y ou may sustain burns. • Do not touch the 6 V/20 W halogen bulb directly with your fin- gers, because finger marks can cause it to crack when heated. Remove finger marks immediately with a cloth dipped in pure alco ...

  • Leica MZ16 - page 45

    45 Leica M Stereomicroscopes – Illuminations Leica L2 cold-light source The antistatic Leica L2 cold-light source is powerful, small, compact, inexpensive and suitable for simple observation tasks with the Leica MS5 and MZ6 stereo microscopes. In addition to one or two-arm light guides, corresponding accessories are al- so available for the coaxi ...

  • Leica MZ16 - page 46

    46 Leica M Stereomicroscopes – Illuminations Cold light source Leica CLS series The Leica CLS series is a high-performance line for high light intensity within the smallest possible space and flicker -free white light with the lowest possible thermal effect on the ob- jects. The comprehensive line of accessories enables unlimited use. The CLS ser ...

  • Leica MZ16 - page 47

    47 Leica M Stereomicroscopes – Illuminations Supply (line) lamp 25W Follow the safety instructions given on page 7. 왘 Fit the lamp holder and lamp as described below (incident-light lamp 6 V/10 W). 왘 Connect the 25 W supply (line) lamp to the power supply . 왘 Switch on the supply (line) lamp. 왘 Align the light spot with the object as desc ...

  • Leica MZ16 - page 48

    Near -vertical illuminator • The near -vertical (approx. 5°) light beam illuminates depres- sions and cavities. • Shadowing by tools is eliminated. • This illuminator can only be used with the achromatic objec- tives having focal lengths of 100, 150, 175 and 200 mm. • Spacer rings are required for the Leica MZ7 5 , MZ9 5 , MZ12 5 to secure ...

  • Leica MZ16 - page 49

    49 Leica M Stereomicroscopes – Illuminations 왘 Attach the fiber -optic light guide on either the left or the right. T o switch on the cold-light illuminator , refer to the user manual provided with it. 왘 T urn the rotary knob. • A movable prism directs the light from the left or right outlet onto the object. No light? ...

  • Leica MZ16 - page 50

    T ubes • All accessory tubes which fit between the optics carrier and the binocular tube are fitted in the same manner . • In the dovetail ring of the optics carrier is a locating screw which must engage the notch in the accessory (page 35). This is best accomplished by moving the accessory slightly from side to side. 왘 Release the clamping s ...

  • Leica MZ16 - page 51

    Drawing tube • The drawing tube is for both left-handers and right-handers. Fit the mirror on the left-hand or right-hand side of the optics carrier . 왘 Fit the drawing tube between optics car- rier and binocular tube as described on page 50. 왘 Place a sheet of paper beneath the mirror . 왘 Use a table lamp to illuminate the paper . 왘 Move ...

  • Leica MZ16 - page 52

    Video/phototubes 52 Leica M Stereomicroscopes – Accessories Leica MPS30 / MPS60 photoautomats 10 445 927 10 445 924 50% 10 446 229 100% 10 446 121 8x 10 446 131 10x 10 446 132 16x 11 541 038 0.55x -1.1x 11 543 703 11 543 706 10 445 932 10 446 120 8x 10 445 304 10x 10 445 305 16x 10 404 207 10 445 541 10 162 226 Adapter SLR SLR camera housing 10 4 ...

  • Leica MZ16 - page 53

    • Video/phototubes are designed to support modular photomicrography systems, and Leica digital, video, film or SLR cameras. • The modular photomicrographic systems and the Leica digi- tal cameras are detailed in a separate user manual, along with instructions for their assembly and use. • When you are not taking photographs, engage the observ ...

  • Leica MZ16 - page 54

    T rinocular video/phototube 100% Fitting: See "T rinocular video/phototube 50%". 왘 Observation: Push lever in. 왘 Photography: Pull out lever to the left. • 100% in both eyepieces. • 100% in the left eyepiece • 100% in the video/photo beam path. As shown in the setup diagram on page 52, there are various possibilities for adaptin ...

  • Leica MZ16 - page 55

    Video/phototube HD50 왘 Use the video/phototube HD50 between the optics carrier and the binocular tube (page 50). 왘 Observation: Push lever in. 왘 Documentation: Pull lever out. • 50% to both eyepieces • 50% in the left-hand video/photo beam path • 50% in the right-hand video/photo beam path • 100% to left video/photo beam path • 50% ...

  • Leica MZ16 - page 56

    Attachment for vertical and oblique observation • The attachment for vertical and oblique observation enables spatial objects to be observed from above, and also from all around at an angle of 45°. • The microscope carrier must be fitted in the lower position 1 (page 34). • For MS5, MZ6: Fit the 1 × achromatic objective by screwing its adap ...

  • Leica MZ16 - page 57

    Stages The ∅ 120 mm stages can be used in those incident and trans- mitted-light stands which have a ∅ 120 mm port. The gliding stage can be moved in all directions and rotated completely . 왘 Place the ∅ 120 mm gliding stage in the ∅ 120 mm port and secure it with the eccentric lever . 왘 Insert the ∅ 120 mm glass stage plate or the bl ...

  • Leica MZ16 - page 58

    58 Leica M Stereomicroscopes – Notes T ips and hints: What to do if … Remedy: • Set the interpupillary distance correctly (page 15). • Locate the eyepoint (page 15). Remedy: • Fit the eyepieces correctly (page 35). • Adjust your dioptric settings exactly as described (page 20). Remedy: • Adjust the ease of movement (pages 16, 29, 31). ...

  • Leica MZ16 - page 59

    59 Leica M Stereomicroscopes – Notes Care, maintenance W e will show you how to look after your microscope and how to clean it. Y ou are working with a high-precision, high-performance instrument. Accordingly , we guarantee the quality of each of our instru- ments. The guarantee covers all faults in materials and manu- facture. It does not, howev ...

  • Leica MZ16 - page 60

    60 Leica M Stereomicroscopes – Notes Cleaning Dust and dirt will affect the quality of your results. 왘 Put a dust cover over the instrument during breaks in work. 왘 Use dust caps to protect tube openings, tubes without eyepieces, and eyepieces. 왘 Remove dust with a pneumatic rubber bulb or with a soft brush. 왘 Clean objectives and eyepiec ...

  • Leica MZ16 - page 61

    61 Leica M Stereomicroscopes – Notes Calculation M O Magnification of objective M E Magnification of eyepiece z Magnification changer position q T ube factor , e.g. 1.5 × for coaxial incident light, 45° ErgoT ube TM 1.6 × r Factor 1.25 × if the planachromatic and planapochro- matic objectives of the MZ12 5 /MZ16 are used on the MS5, MZ6, MZ7 ...

  • Leica MZ16 - page 62

    62 Leica M Stereomicroscopes User Manual Optical data of Leica MS5, MZ6 Objectives Working distance (mm) Field diameter (mm) T otal magnification 0.63 25.2 9.5 31.5 7.6 50.4 4.8 20.2 11.9 15.8 15.2 7.9 30.4 12.6 19 37.6 6.4 0.8 32 7.5 40 6 64 3.8 25.6 9.4 20 12 10 24 16 15 47.8 5 1 40 6 50 4.8 80 3 32 7.5 25 9.6 12.5 19.2 20 12 59.7 4 1.25 50 4.8 6 ...

  • Leica MZ16 - page 63

    63 Leica M Stereomicroscopes User Manual Objectives Working distance (mm) 0.63 16 14.9 10.4 23 0.8 20.4 11.8 13.2 18.2 1 25.5 9.4 16.5 14.5 1.25 31.8 7.5 20.6 11.7 1.6 40.8 5.9 26.3 9 2 51 4.7 32.9 7.3 2.5 63.7 3.8 41.2 5.8 3.2 81.5 2.9 52.7 4.6 4 101.9 2.4 65.8 3.6 0.63 10 23.8 6.5 36.5 0.8 12.7 18.7 8.2 29 1 15.9 14.9 10.3 23 1.25 19.9 11.9 12.9 ...

  • Leica MZ16 - page 64

    64 Leica M Stereomicroscopes User Manual Optical data of Leica MZ7 5 , MZ9 5 Objectives 40 × /6B 0.63 25.2 9.5 31.5 7.6 50.4 4.8 20.2 11.9 15.8 15.2 7.9 30.4 12.6 19 37.6 6.4 0.8 32 7.5 40 6 64 3.8 25.6 9.4 20 12 10 24 16 15 47.8 5 1 40 6 50 4.8 80 3 32 7.5 25 9.6 12.5 19.2 20 12 59.7 4 1.25 50 4.8 62.5 3.8 100 2.4 40 6 31.3 7.7 15.6 15.4 25 9.6 7 ...

  • Leica MZ16 - page 65

    65 Leica M Stereomicroscopes User Manual Objectives 40 × /6B 0.63 16 14.9 10.4 23 0.8 20.4 11.8 13.2 18.2 1 25.5 9.4 16.5 14.5 1.25 31.8 7.5 20.6 11.7 1.6 40.8 5.9 26.3 9 2 51 4.7 32.9 7.3 2.5 63.7 3.8 41.2 5.8 3.2 81.5 2.9 52.7 4.6 4 101.9 2.4 65.8 3.6 5 127.4 1.9 82.3 2.9 6* 152.9 1.6 98.8 2.4 0.63 10 23.8 6.5 36.5 0.8 12.7 18.7 8.2 29 1 15.9 14 ...

  • Leica MZ16 - page 66

    66 Leica M Stereomicroscopes User Manual Optical data of Leica MZ12 5 , MZ16, MZ16 A Eyepieces Working distance (mm) Objectives 0.71 28.4 8.4 14.2 16.9 17.9 13.4 22.7 10.5 45.4 5.3 56.8 4.2 0.8 32 7.5 16 15 20.5 11.7 25.6 9.4 51.2 4.7 64 3.8 1 40 6 20 12 25.6 9.4 32 7.5 64 3.8 80 3 1.25 50 4.8 25 9.6 32 7.5 40 6 80 3 100 2.4 1.6 64 3.8 32 7.5 41 5. ...

  • Leica MZ16 - page 67

    67 Leica M Stereomicroscopes User Manual MS5 1.0x Achromat MS5 Dimensions of Leica MS5 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . Measurements in mm 1 × Achromat 1 × Achromat ...

  • Leica MZ16 - page 68

    68 Leica M Stereomicroscopes User Manual Dimensions of Leica MZ6 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . MZ6 MZ6 1.0x Achromat Measurements in mm 1 × Achromat 1 × Achromat ...

  • Leica MZ16 - page 69

    69 Leica M Stereomicroscopes User Manual Dimensions of Leica MZ7 5 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . 1.0x Plan 1.0x Plan MZ7 5 MZ7 5 Measurements in mm 1 × Plan 1 × Plan ...

  • Leica MZ16 - page 70

    70 Leica M Stereomicroscopes User Manual Dimensions of Leica MZ9 5 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . 1.0x Plan 1.0x Plan MZ9 5 MZ9 5 Measurements in mm 1 × Plan 1 × Plan ...

  • Leica MZ16 - page 71

    71 Leica M Stereomicroscopes User Manual Dimensions of Leica MZ12 5 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . 1.0x Plan 1.0x Plan MZ12 5 MZ12 5 Measurements in mm 1 × Plan 1 × Plan ...

  • Leica MZ16 - page 72

    1x Planapo 1x Planapo MZ16 MZ16 72 Leica M Stereomicroscopes User Manual Dimensions of Leica MZ16 with incident-light stand with transmitted-light stand Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . Measurements in mm ...

  • Leica MZ16 - page 73

    73 Leica M Stereomicroscopes User Manual Additional dimensional diagrams involving Leica ErgoModule™ are available from your Leica agency . Dimensions of Leica MZ16 A with incident-light stand with transmitted-light stand Measurements in mm ...

  • Leica MZ16 - page 74

    74 Leica M Stereomicroscopes User Manual T ype description T ransmitted light base 20 W Power supply ES 635 474 incl. potentiometer T ype of bulb Halogen bulb 6 V/20 W Socket Connection for one external incident illumination with a maximum combined loading of 20 W Operating voltage Primary voltage: 115 /-230 V , 50/60 Hz Secondary voltage: 7 V 28 V ...

  • Leica MZ16 - page 75

    ...

  • Leica MZ16 - page 76

    Leica Microsystems – the brand for outstanding products Leica Microsystems – an international company with a strong network of customer services Australia: Gladesville, NSW T el . +1 800 625 286 Fax +61 2 9817 8358 Austria: Vienna T el . +43 1 486 80 50 0 Fax +43 1 486 80 50 30 Canada: Richmond Hill/Ontario T e l . + 1 905 762 20 00 Fax +1 905 ...

Manufacturer Leica Category Microscope & Magnifier

Documents that we receive from a manufacturer of a Leica MZ16 can be divided into several groups. They are, among others:
- Leica technical drawings
- MZ16 manuals
- Leica product data sheets
- information booklets
- or energy labels Leica MZ16
All of them are important, but the most important information from the point of view of use of the device are in the user manual Leica MZ16.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Leica MZ16, service manual, brief instructions and user manuals Leica MZ16. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Leica MZ16.

Similar manuals

A complete manual for the device Leica MZ16, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Leica MZ16 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Leica MZ16.

A complete Leica manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Leica MZ16 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Leica MZ16, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Leica MZ16, that we can find in the current document
3. Tips how to use the basic functions of the device Leica MZ16 - which should help us in our first steps of using Leica MZ16
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Leica MZ16
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Leica MZ16 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Leica MZ16?

Use the form below

If you did not solve your problem by using a manual Leica MZ16, ask a question using the form below. If a user had a similar problem with Leica MZ16 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)