English dropdown-ico

Manual Perle Systems GNS-30CR

19 pages 0.24 mb
Download

Go to site of 19

Summary
  • Perle Systems GNS-30CR - page 1

    User Guide NOVACOM wireless GNS-30CR 1 ...

  • Perle Systems GNS-30CR - page 2

    2 1. Safety information Radio device have limitations in the vicinity of electronic devices: • Switch the Modem o ff when you are in a hospital or near medi cal devices like p acemakers . The Modem may in te rfere with the op eration of these devices. • Switch the Modem off wh en flying . Secure i t so th at it canno t be swit ched on inadverte ...

  • Perle Systems GNS-30CR - page 3

    2. Contents 1. Saf ety inf orm ati on ............................................................................................................. .. 2 2. Conten ts ............................................................................................................................... 3 3. Overview .......................................... ...

  • Perle Systems GNS-30CR - page 4

    3. Overview 3.1 Front View 3.2 Rear View 4 ...

  • Perle Systems GNS-30CR - page 5

    5 4.Product description The NOVACOM wireless Modem makes integration as simple as possible, primarily for users in the M2M market segment: a stand- alone device, the Modem is fitted with standard interfaces for a power supply, an antenna, a PC, and a handset, with its plug & play technology m aking it very easy to put into operation. Thanks to ...

  • Perle Systems GNS-30CR - page 6

    6 4.1 Highlights • Support band: GNS-30CR: EGSM900/DCS1800/PCS1900 Data, voice, SMS and fax • Easy to integrate • Standard Industrial interfaces • LED display • Wide input voltage range • Highly compact, light and powerful • Integrated SIM card holder • SIM application toolkit • Extended AT commands for in dustrial applications ? ...

  • Perle Systems GNS-30CR - page 7

    7 4.2 Applications • Security systems • Traffic system • Fleet management • Teleservice • Telematics • Telemetry • Remote monitoring • Remote control • Remote me ter rea ding • Mobile office • Vending/POS ...

  • Perle Systems GNS-30CR - page 8

    8 5. Features 5.1 Product data • Support band: GNS-30CR: EGSM900/DCS1800/PCS1900 Certified in accordance with GSM phase 2/2+ • Output performance: - Class4(2W) for GSM850/EGSM900 - Class1(1W) for DCS 1800/PCS 1900 • Control via AT comm ands • Input voltage range DC+6….. +30V • Dimensions: 122 × 68 × 21.6mm • Weight: approx.165g • ...

  • Perle Systems GNS-30CR - page 9

    9 5.2 SMS • Point-to-point MT and MO • SMS cell broadcast • Text and PDU mode 5.3 Da ta • CSD up to 14.4kbps • USSD • Non-transparent mode • GPRS: max.85.6kbps (downlink) max.42.8kbps (uplink) • Coding scheme CS 1,2,3,4 • PPP-stack, TCP/IP protocol ...

  • Perle Systems GNS-30CR - page 10

    10 5.4 Fa x • Group 3, classes 1 5 . 5 External interfaces • Connector for plug-in power supply unit • Handset audio interface (optional) • Mini-SIM card holder • Antenna connector SMA (female) • RS232 interface ...

  • Perle Systems GNS-30CR - page 11

    6. Installation 6 . 1 Package contents • NOVACOM wireless GNS-30CR • NOVACOM wireless GNS-30CR user guide • Antenna • Power supply adapter • RS232 cable 6 .2 Safety and installation information • The Modem should be inst alled and set up only by qualified personal. • Connect at fast 1.25 A fuse to the inco ming line for the positive s ...

  • Perle Systems GNS-30CR - page 12

    12 7.1 Plug-in power supply units • The Modem receiv es its power supply in a wide voltage range (+6V…. +30V) via the power supply connectors, power interface: inte rnal + / external –s upply adaptor: Object Description Current Parameter Input Adaptor Input AC 220V(100~240V) 50Hz Output Ada ptor Output DC 6V(±5%) 2A ...

  • Perle Systems GNS-30CR - page 13

    13 7.2 SIM card holder The connector is intended for 1.8V or 3V SIM card s in accordance with G S M 11.12 phase 2 to ope rate the Modem. The SIM card must be inserted in th e card holder to put the Modem into operation. 1) Make sure that there is no vo ltage applied to the Modem. 2) Operate the eject mechanism (yellow pin next to the card holder) t ...

  • Perle Systems GNS-30CR - page 14

    14 7.3 Antenna connector SMA (f emale) A quad band antenna (GSM850/EGSM 900/DCS1800/PCS1900) can be connected to the RF in terface. The connection is implemented as a 50  SMA (female) coaxial jack. Pin assignments: Signal name Pin Function RF Input RF Input/Output GND Output Frame connecting ...

  • Perle Systems GNS-30CR - page 15

    7.4 RS232 interface The RS232 interface is the interface fo r the application software and the connection to the PC. The customer ap plication communicates with the Modem by AT cellular commands. Th e RS232 interface is implem ented as a 9-pin D-Sub socket with two screws fitting. Pin assignments: Signal Pin Input/Output Description DCD 1 Output RX ...

  • Perle Systems GNS-30CR - page 16

    Use and operation In order to control th e Modem and Tran sfer da ta, the cu st omer application (e.g. host computer) is c onnected via the RS232 cable. N o t e : NOVACOM wireless GNS-30CR Modem must be connected via a RS232-USB converter which baud rate ca n support at least 230400bps. 16 ...

  • Perle Systems GNS-30CR - page 17

    17 8. Startup Before startup, the com ponents required for your application must be connected. The SIM card must be inserted into SIM card holder. The Modem is ready for operation when supply voltage is applied and the ignition line is activated. If the recomme nded plug-in power supply unit is used, the ignition line is already connected to the su ...

  • Perle Systems GNS-30CR - page 18

    Operating states/LED The LED display th e followi ng states of the Modem: State in GSM network Note: Usually, the net work search take s only a few seconds till the Modem is register ed, if the f lashing every 0.85 se conds continues, this means that no SIM card is inserted, no PIN number is ente red or no G PRS network is a v ai lab le. 18 ...

  • Perle Systems GNS-30CR - page 19

    19 9. AT command control The Modem is controlled and progra mmed by means of AT commands. The AT commands structure corr esponds to the SIM module used. For obtain the AT commands or more help, please contact our FAE. ...

Manufacturer Perle Systems Category Network Router

Documents that we receive from a manufacturer of a Perle Systems GNS-30CR can be divided into several groups. They are, among others:
- Perle Systems technical drawings
- GNS-30CR manuals
- Perle Systems product data sheets
- information booklets
- or energy labels Perle Systems GNS-30CR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Perle Systems GNS-30CR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Perle Systems GNS-30CR, service manual, brief instructions and user manuals Perle Systems GNS-30CR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Perle Systems GNS-30CR.

Similar manuals

A complete manual for the device Perle Systems GNS-30CR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Perle Systems GNS-30CR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Perle Systems GNS-30CR.

A complete Perle Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Perle Systems GNS-30CR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Perle Systems GNS-30CR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Perle Systems GNS-30CR, that we can find in the current document
3. Tips how to use the basic functions of the device Perle Systems GNS-30CR - which should help us in our first steps of using Perle Systems GNS-30CR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Perle Systems GNS-30CR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Perle Systems GNS-30CR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Perle Systems GNS-30CR?

Use the form below

If you did not solve your problem by using a manual Perle Systems GNS-30CR, ask a question using the form below. If a user had a similar problem with Perle Systems GNS-30CR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)