English dropdown-ico

Manual Asus T2-P

130 pages 3.67 mb
Download

Go to site of 130

Summary
  • Asus T2-P - page 1

    Barebone Sy stem Model T2-P Terminator 2 User Guide MODE ...

  • Asus T2-P - page 2

    2 Copyright © 2004 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without t ...

  • Asus T2-P - page 3

    3 Contents Notices ........................................................................................... 6 Safety information .......................................................................... 7 About this guide .............................................................................. 8 System package contents ................... ...

  • Asus T2-P - page 4

    4 3.3 Support CD information ....................................................... 46 3.3.1 Running the support CD ........................................ 47 3.3.2 Drivers menu ......................................................... 47 3.3.3 Utilities menu ......................................................... 48 3.3.4 ASUS contact informat ...

  • Asus T2-P - page 5

    5 5.2.5 Sub-menu items .................................................... 99 5.2.6 Configuration fields ............................................... 99 5.2.7 Pop-up window ...................................................... 99 5.2.8 Scroll bar ............................................................... 99 5.2.9 General help ............ ...

  • Asus T2-P - page 6

    6 Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has be ...

  • Asus T2-P - page 7

    7 Safety infor mation Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. • If the power supply is ...

  • Asus T2-P - page 8

    8 Safeguards About this guide Audience This guide provides general information and installation instructions about the ASUS T erminator 2 barebone system. This guide is intended for experienced users and integrators with hardware knowledge of personal computers. How this guide is organized This guide contains the following parts: 1. Chapter 1: Syst ...

  • Asus T2-P - page 9

    9 Conventions used in this guide W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORT ANT : Information that you MUST follow to complete a task. NOTE: T ips and additional information to aid in completing a task. Where to f ...

  • Asus T2-P - page 10

    10 System package contents Check your T erminator 2 system package for the following items. If any of the items is damaged or missing, contact your retailer immediately . T2-P Editions Item Description Consumer Commercial Deluxe 1. ASUS T erminator 2 barebone system with • ASUS P4P8T motherboard • Floppy disk drive • 3-in-1 PCI card (1394, WL ...

  • Asus T2-P - page 11

    ASUS T erminator 2 barebone system MODE Chapter 1 System introduction This chapter gives a general description of the ASUS T erminator 2. The chapter lists the system features including introduction on the front and rear panel, and internal components. ...

  • Asus T2-P - page 12

    12 Chapter 1: System introduction 1 . 1 W elcome! Thank you for choosing the ASUS T erminator 2! The ASUS T erminator 2 is an all-in-one barebone system with a versatile home entertainment feature. The system comes in a stylish mini-tower casing, and powered by the ASUS P4P8T motherboard that supports Intel ® Pentium ® 4 Northwood/ Prescott proce ...

  • Asus T2-P - page 13

    13 ASUS T erminator 2 barebone system 1. Floppy drive door . Open this door to access the floppy disk drive. 2. Optical drive door . This door opens when you eject the loading tray . 3. Eject button. Press this button to eject the loading tray of the optical drive. 4. Second optical drive door . This door covers a second optical drive bay . 5. Powe ...

  • Asus T2-P - page 14

    14 Chapter 1: System introduction 14. ST OP button ( ). Press this button to stop the audio track being played. 15. PREVIOUS button ( ). Press this button to perform various functions in dif ferent modes. In CD mode , selects the previous audio track. In Radio mode , selects the previous preset station. 16. NEXT button ( ). Press this button to per ...

  • Asus T2-P - page 15

    15 ASUS T erminator 2 barebone system 1 .3 Fr ont panel (internal) The optical drive(s), storage card reader slots, and several I/O ports are located inside the front panel doors. Open the front panel doors by pressing the mark. MODE 20 19 21 22 23 24 25 26 27 28 29 30 20 19 25 26 27 30 19. Floppy disk drive. This drive is for 1.44MB, 3.5-inch flop ...

  • Asus T2-P - page 16

    16 Chapter 1: System introduction 25. Headphone port ( ). This port connects a headphone with a stereo mini-plug. 26. Microphone port ( ). This Mic (pink) port connects a microphone. 27. USB 2.0 ports ( 2 .0 ). These Universal Serial Bus 2.0 (USB 2.0) ports are available for connecting USB 2.0 devices such as a mouse, printer , scanner , camera, PD ...

  • Asus T2-P - page 17

    17 ASUS T erminator 2 barebone system 1 .4 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 1. GAME/MIDI port ( ). This port connects a joystick, or game pad for playing games, and MIDI devices for audio editing. 2. T elephone port ( ) (optional) . This port connects an ...

  • Asus T2-P - page 18

    18 Chapter 1: System introduction 7. VGA port ( ). This port connects a VGA monitor . 8. Parallel port ( ). This 25-pin port connects a printer , scanner , or other devices. 9. Line Out port ( ). This Line Out (lime) port connects a headphone or a speaker . In 4/6-channel mode, the function of this port becomes Front Speaker Out. 10. Line In port ( ...

  • Asus T2-P - page 19

    19 ASUS T erminator 2 barebone system 21. V ideo In port. (Deluxe models-Consumer edition only .) This port connects a video casette recorder . 22. Cable TV connector . (Deluxe models-Consumer edition only .) This connects a cable TV twist-on connector . 23. Wireless LAN adapter antenna connector . This connects the dipolar antenna of the wireless ...

  • Asus T2-P - page 20

    20 Chapter 1: System introduction 1. Optical drive 2. 5.25-inch empty optical drive bay 3. Floppy disk drive 4. Front panel cover 5. Hard disk drive metal tray 6. Chassis fan 7. ASUS P4P8T motherboard 8. DIMM sockets 9. CPU fan and heatsink assembly 10. AGP slot 1 1. PCI slot (with an installed PCI card) 12. SA T A connectors 1 .5 Internal componen ...

  • Asus T2-P - page 21

    21 ASUS T erminator 2 barebone system 1 .6 LED panel The LED panel displays various system information depending on the system mode. The LED panel displays the system time in 24-hour format when the system is in soft-off or stand-by mode, S3 (Suspend-to-RAM), or S4 (Suspend-to-Disk) state. Enter the BIOS setup or the operating system to adjust the ...

  • Asus T2-P - page 22

    22 Chapter 1: System introduction ...

  • Asus T2-P - page 23

    ASUS T erminator 2 barebone system MODE Chapter 2 Basic installation This chapter provides step-by-step instructions on how to install components in the system. ...

  • Asus T2-P - page 24

    24 Chapter 2: Basic installation 2. 1 Prepar ation Before you proceed, make sure that you have all the components you plan to install in the system. Basic components to install 1. Central processing unit (CPU) 2. DDR Dual Inline Memory Module (DIMM) 3. Expansion card(s) 4. Hard disk drive 5. Second optical drive T ool Phillips (cross) screw driver ...

  • Asus T2-P - page 25

    25 ASUS T erminator 2 barebone system 3. Slightly pull the cover toward the rear panel until the side tabs are disengaged from the chassis. 4. Lift the cover , then set aside. 2. Use a Phillips screw driver to remove the cover screws. Keep the screws for later use. 2.3 Removing the cover T o remove the cover: 1. On the rear panel, locate the three ...

  • Asus T2-P - page 26

    26 Chapter 2: Basic installation 2.4 Removing the power supply Y ou must remove the power supply unit (PSU) before you can install a central processing unit (CPU) and other system components. T o remove the PSU: 1. Lay the system on its side on a flat, stable surface. 2. Disconnect the optical drive and floppy disk drive power plugs. 3. Remove the ...

  • Asus T2-P - page 27

    27 ASUS T erminator 2 barebone system 2.5 Inst alling a CPU The P4P8T motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is designed for Intel ® Pentium ® 4 Northwood/Prescott processor . 2.5.1 Removing the CPU fan and heatsink assembly The system package includes a pre-installed proprietary CPU fan and ...

  • Asus T2-P - page 28

    28 Chapter 2: Basic installation 2.5.2 CPU installation T o install the CPU: 1. Locate the 478-pin CPU socket on the motherboard. 2. Unlock the socket by pressing the lever sideways then lifting it up to a 90° angle. 3. Position the CPU above the socket such that its marked corner (gold mark) matches the base of the socket lever . 4. Carefully ins ...

  • Asus T2-P - page 29

    29 ASUS T erminator 2 barebone system 2. Align the retention bracket with the rails on the side of the CPU fan. 3. Attach the retention bracket hook into the retention module hole. 2.5.3 Re-installing the CPU fan and heatsink assembly T o re-install the CPU fan and heatsink assembly: 1. Position the CPU fan and heatsink assembly on top of the insta ...

  • Asus T2-P - page 30

    30 Chapter 2: Basic installation 2.6 Inst alling a DIMM The system motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets that support dual-channel memory configuration using unbuffered non-ECC PC3200/2700/2100 DIMMs. 2.6.1 Memory configurations Y ou may install up to 2GB system memory using 64MB, 128MB, 256MB, 5 ...

  • Asus T2-P - page 31

    31 ASUS T erminator 2 barebone system 2.6.2 DIMM installation T o install a DDR DIMM. 1. Locate the two DIMM sockets on the motherboard. 2. Unlock a socket by pressing the retaining clips outward. 3. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 4. Firmly insert the DIMM into the socket until the retain ...

  • Asus T2-P - page 32

    32 Chapter 2: Basic installation Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage the motherboard. 2.7 Inst alling an expansion card In the future, you may need to install expansion cards. The motherboard has one PCI and one Accelerated Graphics Port (AGP) slot. ...

  • Asus T2-P - page 33

    33 ASUS T erminator 2 barebone system 2.7.2 Expansion card installation T o install an expansion card. 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2. Pull the expansion card lock to the direction of the arrow . 3. Remove the metal bracket opposite the slot ...

  • Asus T2-P - page 34

    34 Chapter 2: Basic installation Standard interrupt assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 1 1 Communications Port (COM2) 4* 12 Communications Port (COM1) 5* 13 Sound Card (sometimes LPT2) 6 14 Floppy Disk Controller 7* 15 Printer Port (LPT1) 8 3 System CMOS/Real T ime Cl ...

  • Asus T2-P - page 35

    35 ASUS T erminator 2 barebone system 2.8 Inst alling a second optical drive The system comes with a pre-installed optical drive (DVD-RW , DVD-ROM, CD-RW , or CD-ROM) and an empty 5.25-inch drive bay for a second optical drive. T o install a second optical drive: 1. Place the chassis upright. 2. Locate the front panel cover hooks. 3. Press the hook ...

  • Asus T2-P - page 36

    36 Chapter 2: Basic installation 8. Connect a power cable from the power supply unit to the power connector at the back of the optical drive. See page 40 for details. 9. Connect one end of the IDE ribbon cable to the IDE interface at the back of the optical drive, matching the red stripe on the cable with Pin 1 on the IDE interface. 10. Connect one ...

  • Asus T2-P - page 37

    37 ASUS T erminator 2 barebone system Configure your hard disk drive as Master device before connecting the IDE cable and power plug. Refer to the HDD documentation on how to set the drive as a Master device. 2.9 Inst alling a hard disk drive (HDD) The system supports one UltraA T A133 IDE or one Serial A T A hard disk drive. T o install an IDE har ...

  • Asus T2-P - page 38

    38 Chapter 2: Basic installation 6. Re-install the tray and the HDD to the chassis by locking the tray slots to the chassis hooks. 7. Secure the tray with the screw you earlier removed. 8. Connect one end of the 40-pin IDE cable to the IDE connector on the drive. 9. Connect a 4-pin power plug from the power supply unit to the HDD power connector . ...

  • Asus T2-P - page 39

    39 ASUS T erminator 2 barebone system 2. 10 Re-inst alling the power suppl y unit Re-install the power supply unit (PSU) after installing the system components and reconnecting the cables, . T o reinstall the PSU: 1. Connect the 4-pin 12V and the 20-pin A TX power plugs to the A TX12V and A TXPWR connectors, respectively . See page 81 for the locat ...

  • Asus T2-P - page 40

    40 Chapter 2: Basic installation 6. Connect the 4-pin power plug to the power connector of the floppy disk drive. 7. Connect the 4-pin power plug(s) to the power connector of the optical drive(s). 8. Connect the 4-pin power plug to the power connector of the hard disk drive. V oltage selector The PSU has a 1 15V/230V voltage selector switch located ...

  • Asus T2-P - page 41

    41 ASUS T erminator 2 barebone system 2. 11 Replacing the cover T o replace the cover . 1. T urn the chassis upright. 2. Position the front edge of the cover at least two inches from the front panel cover . Fit the cover tabs with the chassis rail and the front panel tabs. 3. Lower the rear edge of the cover as shown. 4. Push the cover slightly tow ...

  • Asus T2-P - page 42

    42 Chapter 2: Basic installation 2. 1 2 Connecting external devices T o the front panel Mic Headphone HDD Scanner Camera Audio Devices ...

  • Asus T2-P - page 43

    43 ASUS T erminator 2 barebone system T o the rear panel PS/2 Mouse Line Out Recorder Mic RJ-45 VGA monitor Card Reader Joystick Power outlet Printer Serial mouse PS/2 KB RJ-1 1 socket T elephone ...

  • Asus T2-P - page 44

    44 Chapter 2: Basic installation ...

  • Asus T2-P - page 45

    ASUS T erminator 2 barebone system ASUS T erminator 2 barebone system MODE Chapter 3 Starting up This chapter helps you power up the system and install drivers and utilities from the support CD. ...

  • Asus T2-P - page 46

    46 Chapter 3: Starting up 3. 1 Inst alling an oper ating system T erminator 2 supports Windows ® 2000/XP operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. 3.3 Suppor t CD infor mation The support CD that came with the system contains useful software and several ...

  • Asus T2-P - page 47

    47 ASUS T erminator 2 barebone system 3.3.1 Running the support CD T o begin using the support CD, place the CD in your optical drive. The CD automatically displays the Drivers menu if Autorun is enabled in your computer . If Autorun is NOT enabled in your computer , browse the contents of the support CD to locate the file ASSETUP .EXE from the BIN ...

  • Asus T2-P - page 48

    48 Chapter 3: Starting up 3.3.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. LifeV iew TVR Application The LifeView TVR application allows control of the TV tuner and radio module. See page 58 for details. ASUS Radio Application This item installs the ASUS radio application that allows y ...

  • Asus T2-P - page 49

    49 ASUS T erminator 2 barebone system ASUS PC Probe This utility continuously monitors vital system information such as fan rotations, CPU temperature, and system voltages, and alerts you on any detected problems. This utility helps you keep your computer in a healthy operating condition. Install ASUS Update This item installs the ASUS Update that ...

  • Asus T2-P - page 50

    50 Chapter 3: Starting up 3.3.5 Other information The icons on the top right side of the screen provide additional information on the motherboard and the contents of the support CD. ...

  • Asus T2-P - page 51

    51 ASUS T erminator 2 barebone system 3.4 Sof twar e information Most of the applications in the support CD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software for more information. 3.4.1 Multi-channel audio feature The AD1888 AC ‘97 audio CODEC provides 6-channel ...

  • Asus T2-P - page 52

    52 Chapter 3: Starting up 10. The MIDI Music Synthesizer tab allows you to select a setting for the MIDI. 1 1. Click the Synthesizer Default Set drop-down menu to display a list of options. Choose the desired setting. 12. Click Apply , then click OK when finished. 13. Reboot the computer . 6. Click the T est button to display the T est Listening En ...

  • Asus T2-P - page 53

    53 ASUS T erminator 2 barebone system Adjusting the volume settings 1. After rebooting the system, click the volume control icon on the Windows ® taskbar to display the V olume Control window . 2. Click the V olume Control Advanced button. The Advanced Controls for V olume Control window appears. T o achieve 6-channel audio capability when playing ...

  • Asus T2-P - page 54

    54 Chapter 3: Starting up 3.4.2 ASUS Radio Player ASUS Radio Player allows you to tune into an FM station using the optional radio module. T une left Scan left Stop Scan right T une right Close ASUS Radio Minimize ASUS Radio Power button Preset station list Station frequency Increase the volume Decrease the volume Mute/Sound on button Store button ...

  • Asus T2-P - page 55

    55 ASUS T erminator 2 barebone system Storing a radio station T o store a radio station: 1. Use the Scan or T une buttons to tune into a radio station you wish to store. 2. Click the Store button. A Store Channel window appears. 3. Assign a Channel (preset number) to the radio station using the arrow buttons. 4. T ype the station name in the field, ...

  • Asus T2-P - page 56

    56 Chapter 3: Starting up T o enable ASUS Instant Music: 1. Connect the analog audio cable from the optical drive to the 4-pin CD connector on the motherboard. See section “4.4 Connectors” for the location of the CD connector . 3.4.3 ASUS Instant Music The motherboard is equipped with a BIOS-based audio playback feature called Instant Music . T ...

  • Asus T2-P - page 57

    57 ASUS T erminator 2 barebone system T o use ASUS Instant Music: 1. Connect the PC power plug to an electrical outlet. 2. Use either one of the two sets of special function keys on your keyboard to play audio CDs. These keys only function as indicated if you enabled the Instant Music item in BIOS. Instant Music function keys (Set 1) Instant Music ...

  • Asus T2-P - page 58

    58 Chapter 3: Starting up 3.4.4 LifeV iew ® TVR Application The LifeView ® TVR Application allows you to watch and record TV in the T erminator 2 system. Install this application if your system comes with a 3-in-1 PCI card with a TV tuner . The 3-in-1 PCI card is available only on Deluxe models. Using LifeV iew ® TVR T o use the LifeView ® TVR ...

  • Asus T2-P - page 59

    59 ASUS T erminator 2 barebone system 3.5 Audio DJ Audio DJ is an application that allows you to play audio CD/DVD or tune into an FM radio station without entering the T erminator 2 operating system. T o put the system in Audio DJ mode: 1. Connect the system power plug to an electrical outlet. 2. Press the CD button ( ) on the front panel to put t ...

  • Asus T2-P - page 60

    60 Chapter 3: Starting up 3.5.3 Presetting a station T o preset a radio station: 1. Put the Audio DJ in radio mode. 2. Select the radio station you wish to preset by pressing the PLA Y/P AUSE ( / ) button for less than 2 seconds. 3. After selecting the radio station, press the PLA Y/P AUSE ( / ) button for more than 2 seconds or until the station f ...

  • Asus T2-P - page 61

    61 ASUS T erminator 2 barebone system 3.6 ASUS Wir eless L AN adapter The 3-in-1 PCI card bundled with the T erminator 2 Commercial Deluxe model comes with an IEEE 802.1 1b-compliant wireless LAN adapter for wireless local area network (WLAN). The 3-in-1 PCI card is available only on Commercial Deluxe models. Features The wireless LAN adapter gives ...

  • Asus T2-P - page 62

    62 Chapter 3: Starting up 3.6.1 LED indicators The wireless LAN adapter comes with a Data T ransmission (Green AIR) and Network Link (Y ellow LINK) LED indicators. Refer to the table below for LED indications. 3.6.2 Antenna installation Connect the dipolar antenna to the antenna connector (male) of the wireless LAN adapter before installing the dev ...

  • Asus T2-P - page 63

    63 ASUS T erminator 2 barebone system 3.6.4 Other support CD options Uninstall ASUS WLAN Card Utilities/ Driver . Click this option to uninstall the WLAN Card utilities and driver from the system. Read/Install User Documentation. Click to view the user handbook, installation, and quick setup guides in PDF format. Install Screen Savers. Click this o ...

  • Asus T2-P - page 64

    64 Chapter 3: Starting up Control Center right-click menu Right-clicking the Control Center icon displays the right-click menu. The following sections describe the right-click menu items. 3.6.5 The Control Center utility The Control Center utility is a management software that launches applications and configures network settings. The Control Cente ...

  • Asus T2-P - page 65

    65 ASUS T erminator 2 barebone system Wireless LAN Card Settings The Wireless LAN Card Settings is the main interface that allows you to control the ASUS wireless LAN adapter . Use the Wireless Settings to view the operational and connection status, or to modify the wireless LAN adapter configuration. The Wireless Settings window is composed of the ...

  • Asus T2-P - page 66

    66 Chapter 3: Starting up Status - IP Config tab The IP Config tab displays the current host and Ethernet adapter configurations. IP Config displays TCP/IP information including the IP address, subnet mask, default gateway , DNS and W indows Internet Naming Service (WINS) configurations. Use the IP Config tab to verify your network settings. IP Rel ...

  • Asus T2-P - page 67

    67 ASUS T erminator 2 barebone system Status - Ping tab The Ping tab allows you to verify the connection of the host computer with another computer in the network. T o ping a connection: 1. T ype the IP address of the connection you want to verify in the IP Address field. 2. Configure the ping session by assigning the size and count of packet to se ...

  • Asus T2-P - page 68

    68 Chapter 3: Starting up Config - Encryption tab Wireless data transmissions between your wireless LAN adapter and the AP are secured using the Wired Equivalent Privacy (WEP) encryption. Check the Data encryption (WEP enabled) option to assign the WEP keys. Check the Network Authentication (Shared Mode) option if you wish to use a network key to a ...

  • Asus T2-P - page 69

    69 ASUS T erminator 2 barebone system All wireless clients in a network must have identical WEP keys to communicate with each other or with an access point. T wo ways to assign WEP keys Manual Assignment . For a 64-bit encryption, enter 10 hexadecimal digits (0~9, a~f, A~F) or 5 ASCII characters in each of the four WEP keys. For 128-bit encryption ...

  • Asus T2-P - page 70

    70 Chapter 3: Starting up Config - Soft AP tab The Soft AP tab displays the Internet Connection Sharing (ICS) and bridge features of the wireless LAN adapter . The Soft AP tab appears only on systems running on Windows ® XP . SoftAP/ST A Mode. This field allows you to select the wireless LAN adapter mode. Select Station Mode if you wish to connect ...

  • Asus T2-P - page 71

    71 ASUS T erminator 2 barebone system Site Survey The Site Survey window displays the available networks within the wireless LAN adapter range and the following network settings: BSSID - The IEEE MAC address of the available wireless networks. SSID - SSID (service set identifier) of the network. CH - Direct sequence channel used by the network. RSS ...

  • Asus T2-P - page 72

    72 Chapter 3: Starting up Help Menu The Control Center utility comes with a Help menu to guide you in using the Control Center and Wireless Settings utilities. Right-click the Control Center icon, then select Help . Select the utility you wish to view the help files. Change Mode The Change Mode menu allows you to set the wireless LAN adapter in a S ...

  • Asus T2-P - page 73

    73 ASUS T erminator 2 barebone system Preferences The Preferences window allows you to customize the Control Center Utility settings. Control Center left-click menu Left-clicking the Control Center icon displays the left-click Menu. The options are described below . Wireless Radio On – T urns the wireless LAN adapter radio ON. Wireless Radio Off ...

  • Asus T2-P - page 74

    74 Chapter 3: Starting up ...

  • Asus T2-P - page 75

    ASUS T erminator 2 barebone system MODE Chapter 4 Motherboard info This chapter gives information about the motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations. ...

  • Asus T2-P - page 76

    76 Chapter 4: Motherboard info 4. 1 Introduction The ASUS P4PT motherboard comes already installed in the ASUS T erminator 2 system. This chapter provides technical information about the motherboard for future upgrades or system reconfiguration. 4.2 Motherboard layout CHA_F AN FLOPPY CD1 AD1888 AUX1 USB56 P4P8T ® IOC_MB PCI Slot 1 Super I/O Flash ...

  • Asus T2-P - page 77

    77 ASUS T erminator 2 barebone system 4.3 Jumper Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system setup information such as system passwords, is powered b ...

  • Asus T2-P - page 78

    78 Chapter 4: Motherboard info 4.4 Connectors This section describes and illustrates the connectors on the motherboard. See page 17 for the description of rear panel connectors. 1. Front panel USB connector (10-1 pin USB56) The USB56 header is connected to the USB_2 connector on the front panel I/O daughterboard. 2. Front panel audio connector (10- ...

  • Asus T2-P - page 79

    79 ASUS T erminator 2 barebone system 3. Digital audio connector (4-1 pin SPDIF_OUT) The SPDIF_OUT is connected to the SPDIF_OUT2 connector on the front panel I/O daughterboard to support the optical S/PDIF port. P4P8T ® P4P8T Digital Audio Connector +5V SPDIFOUT GND SPDIF OUT P4P8T ® P4P8T USB Port USB Power USBP2– USBP2+ GND NC USB Power USBP ...

  • Asus T2-P - page 80

    80 Chapter 4: Motherboard info 5. Modem connector (10-1 pin MDC) This interface connects to the JP2 connector on the optional modem module. P4P8T ® P4P8T MDC Connector MDC 1 PHONE AC_SYNC AC_SDIN1 GND MDC_BITCLK GND +3VSB AC_RST# AC_SDOUT P4P8T ® P4P8T IOC_MB Connector ® CGAEX COM1 GAME IOC_DC 6. I/O extension module (22-pin IOC_MB) This connect ...

  • Asus T2-P - page 81

    81 ASUS T erminator 2 barebone system 7. CPU and chassis fan connectors (3-pin CPU_F AN, CHA_F AN) The fan connectors support the proprietary CPU fan and chassis fan. Connect the fan cable to the connector matching the black wire to the ground pin. P4P8T ® P4P8T Fan Connectors CPU_F A N GND Rotation +12V CHA_F A N GND Rotation +12V P4P8T ® P4P8T ...

  • Asus T2-P - page 82

    82 Chapter 4: Motherboard info P4P8T ® P4P8T SA T A Connectors S ATA 2 GND RSA T A_TXP2 RSA T A_TXN2 GND RSA T A_RXP2 RSA T A_RXN2 GND S ATA 1 GND RSA T A_TXP1 RSA T A_TXN1 GND RSA T A_RXP1 RSA T A_RXN1 GND 10. Serial A T A connectors (7-pin SA T A2, SA T A1) These next generation connectors support the thin Serial A T A cables for Serial A T A ha ...

  • Asus T2-P - page 83

    83 ASUS T erminator 2 barebone system Parallel A T A and Serial A T A device configurations Following are the Parallel A T A and Serial A T A device configurations supported by Intel ICH5 specifications. Native operating systems (OS) are Windows ® 2000/XP . ICH5 supports a maximum of six (6) devices using these OS. Legacy OS are MS-DOS, Windows ® ...

  • Asus T2-P - page 84

    84 Chapter 4: Motherboard info 1 1. Internal audio connectors (4-pin AUX1, CD1) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card. P4P8T ® P4P8T Internal Audio Connectors AUX1 (White) CD1 (Black ) Right Audio Channel Left Audio Channel Ground Right Audio Channel Left Audio Channel ...

  • Asus T2-P - page 85

    85 ASUS T erminator 2 barebone system 13. System panel connector (8-1 pin P ANEL) This connector accommodates several system front panel functions. P4P8T ® P4P8T System Panel Connector * Requires an A TX power supply . PLED+ Ground Power LED PWR A TX Power Switch* PLED- IDE_LED+ IDE_LED- IDE_LED P ANEL • Power LED Lead This 2-pin connector conne ...

  • Asus T2-P - page 86

    86 Chapter 4: Motherboard info ...

  • Asus T2-P - page 87

    87 ASUS T erminator 2 barebone system MODE Chapter 5 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters. ...

  • Asus T2-P - page 88

    88 Chapter 5: BIOS setup 5. 1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. AFUDOS (Updates the BIOS in DOS mode using a bootable floppy disk.) 2. ASUS EZ Flash (Updates the BIOS using a floppy disk during POST .) 3. CrashFree BIOS 2 (Updates the BIO ...

  • Asus T2-P - page 89

    89 ASUS T erminator 2 barebone system 5.1.2 Using AFUDOS to copy the current BIOS The AFUDOS.EXE utility can also be used to copy the current system BIOS settings to a floppy or hard disk. The copy can be used as a backup in case the system BIOS fails or gets corrupted. 1. At the DOS prompt, type the command line: afudos /o <filename> where ? ...

  • Asus T2-P - page 90

    90 Chapter 5: BIOS setup 2. Copy the AFUDOS.EXE utility from the support CD to the bootable floppy disk that contains the BIOS file. 3. Boot the system from the floppy disk. 4. At the DOS prompt, type the command line: afudos / i<filename.rom> where “filename.rom” means the latest (or original) BIOS file that you copied to the bootable fl ...

  • Asus T2-P - page 91

    91 ASUS T erminator 2 barebone system When the BIOS update process is complete, the utility returns to the DOS prompt. A:>afudos /ip4p8t.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file ..... done Erasing flash .... done Writing flash .... 0x0008CC00 (9%) Verifying fla ...

  • Asus T2-P - page 92

    92 Chapter 5: BIOS setup 5.1.4 Using ASUS EZ Flash to update the BIOS The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility . The EZ Flash is built-in the BIOS LPC chip so it is accessible by simply pressing <Alt> + <F2> du ...

  • Asus T2-P - page 93

    93 ASUS T erminator 2 barebone system 5.1.5 Recovering the BIOS with CrashFree BIOS 2 The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from the motherboard support CD, or from a floppy disk that contains the BIOS file, in case the current BIOS on the motherboard fails or gets corrupted. T o recover the BIOS from a floppy disk: 1. ...

  • Asus T2-P - page 94

    94 Chapter 5: BIOS setup T o recover the BIOS from the support CD: 1. Boot the system. 2. When a corrupted BIOS is detected, the following screen message appears. Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... 3. Place the support CD in the optical drive. The support CD contains the original BIOS for this motherboard. 4. When t ...

  • Asus T2-P - page 95

    95 ASUS T erminator 2 barebone system 5.1.6 ASUS Update The ASUS Update is a utility that allows you to update the motherboard BIOS in Windows ® environment. This utility is available in the support CD that comes with the motherboard package. ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP) ...

  • Asus T2-P - page 96

    96 Chapter 5: BIOS setup 4. From the FTP site, select the BIOS version that you wish to download. Click Next . 5. Follow the screen instructions to complete the update process. If you selected the option to update the BIOS from a file, a window pops up prompting you to locate the file. Select the file, click Save , then follow the screen instructio ...

  • Asus T2-P - page 97

    97 ASUS T erminator 2 barebone system 5.2 BIOS Setup pr ogr am This motherboard supports a programmable Firmware Hub (FWH) that you can update using the provided utility described in section “ 5.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run ...

  • Asus T2-P - page 98

    98 Chapter 5: BIOS setup System Time [11:10:19] System Date [Thu, 09/27/2003] Legacy Diskette A [1.44M, 3.5 in.] Language [English] Primary IDE Master [ST321122A] Primary IDE Slave [ASUS CDS520/] Secondary IDE Master [Not Detected] Secondary IDE Slave [Not Detected] Third IDE Master [Not Detected] Fourth IDE Master [Not Detected] IDE Configuration ...

  • Asus T2-P - page 99

    99 ASUS T erminator 2 barebone system 5.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items. 5.2.5 Sub-menu items An item with a sub-menu on any menu sc ...

  • Asus T2-P - page 100

    100 Chapter 5: BIOS setup 5.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears giving you an overview of the basic system information. 5.3.1 System Time [xx:xx:xxxx] This item allows you to set the system time. 5.3.2 System Date [Day xx/xx/xxxx] This item allows you to set the system date. 5.3.3 Legacy Diskette A [1.44M ...

  • Asus T2-P - page 101

    101 ASUS T erminator 2 barebone system 5.3.4 Primary and Secondary IDE Master/Slave; Third and Fourth IDE Master While entering Setup, BIOS auto-detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press Enter to display the IDE device information. The values opposite the dimmed items (Dev ...

  • Asus T2-P - page 102

    102 Chapter 5: BIOS setup PIO Mode [Auto] Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMAR T Monitoring [Auto] Sets the Smart Monitoring, Analysis, and ...

  • Asus T2-P - page 103

    103 ASUS T erminator 2 barebone system Enhanced Mode Support On [S-A T A] The default setting S-A T A allows you to use native OS on Serial A T A and Parallel A T A ports. We recommend that you do not change the default setting for better OS compatibility . In this setting, you may use legacy OS on the Parallel A T A ports only if you did not insta ...

  • Asus T2-P - page 104

    104 Chapter 5: BIOS setup 5.4.1 CPU Configuration The items in this menu show the CPU-related information auto-detected by BIOS. Ratio CMOS Setting [26] This item allows you to set the ratio between the CPU clock and the FSB Frequency . Select this option, then press <Enter> to specify the ratio value. We recommend that you keep the default s ...

  • Asus T2-P - page 105

    105 ASUS T erminator 2 barebone system L3 Cache [Enabled] This item allows you to enable or disable the L3 cache. Configuration options: [Enabled] [Disabled] Max CPUID V alue Limit [Disabled] This item allows you to enable or disable the CPUID maximum value limit support for older OS. Configuration options: [Disabled] [Enabled] Hyper-Threading T ec ...

  • Asus T2-P - page 106

    106 Chapter 5: BIOS setup DRAM CAS# Latency [2.5 Clocks] This item controls the latency between the SDRAM read command and the time the data actually becomes available. Configuration options: [2.0 Clocks] [2.5 Clocks] [3.0 Clocks] DRAM RAS# Precharge [4 Clocks] This item controls the idle clocks after issuing a precharge command to the DDR SDRAM. C ...

  • Asus T2-P - page 107

    107 ASUS T erminator 2 barebone system Onboard V ideo Memory [Enabled, 8MB] Allows you to set the size of the onboard video memory . Configuration options: [Enabled, 1MB] [Enabled, 4MB] [Enabled, 8MB] [Enabled, 16MB] [Enabled, 32MB] Graphics Aperture Size [64MB] This parameter allows you to select the mapped memory for AGP graphic data. Configurati ...

  • Asus T2-P - page 108

    108 Chapter 5: BIOS setup 5.4.3 Onboard Devices Configuration OnBoard AC’97 Audio [Auto] [Auto] allows the BIOS to detect whether you are using any audio device. If an audio device is detected, the onboard audio controller is enabled; if no audio device is detected, the controller is disabled. Configuration options: [Auto] [Disabled] OnBoard LAN ...

  • Asus T2-P - page 109

    109 ASUS T erminator 2 barebone system EPP V ersion [1.9] Allows selection of the Parallel Port EPP version. This item appears only when the Parallel Port Mode is set to EPP . Configuration options: [1.9] [1.7] ECP Mode DMA Channel [DMA3] Allows selection of the Parallel Port ECP DMA channel. This item appears only when the Parallel Port Mode is se ...

  • Asus T2-P - page 110

    110 Chapter 5: BIOS setup 5.4.4 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. NO: Lets the BIOS configure all the devices in the system. YES: Lets ...

  • Asus T2-P - page 111

    111 ASUS T erminator 2 barebone system Palette Snooping [Disabled] When set to [Enabled], the pallete snooping feature informs the PCI devices that an ISA graphics device is installed in the system so that the latter can function correctly . Setting to [Disabled] deactivates this feature. Configuration options: [Disabled] [Enabled] PCI IDE BusMaste ...

  • Asus T2-P - page 112

    112 Chapter 5: BIOS setup 5.4.5 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press Enter to display the configuration options. USB Configuration Module Version : 2.22.4-5.3 USB Devices Enabled : None USB Function [8 USB Ports] Legacy USB Support [Auto] USB 2.0 Controller [Enabled] USB 2 ...

  • Asus T2-P - page 113

    113 ASUS T erminator 2 barebone system USB Mass Storage Device Configuration USB Mass Storage Reset Delay [20 Sec] Allows you to select the number of seconds POST waits for the USB mass storage device after the start unit command. The message “No USB mass storage device detected” appears if none is installed in the system. Configuration options ...

  • Asus T2-P - page 114

    114 Chapter 5: BIOS setup 5.4.6 Instant Music Configuration Instant Music [Disabled] Allows you to enable or disable the Instant Music feature in BIOS. Configuration options: [Disabled] [Enabled] Instant Music CD-ROM Drive [IDE Secondary Master] Allows you to select the CD-ROM drive that you wish to use for the Instant Music CD playback. Configurat ...

  • Asus T2-P - page 115

    115 ASUS T erminator 2 barebone system 5.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options. 5.5.1 Suspend Mode [Auto] Allows you to select the ACPI state to be used for system suspend. Configuration options: [Auto] ...

  • Asus T2-P - page 116

    116 Chapter 5: BIOS setup 5.5.5 APM Configuration Restore on AC Power Loss [Power Off] When set to Power Off, the system goes into of f state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state whatever was the system state before the AC power l ...

  • Asus T2-P - page 117

    117 ASUS T erminator 2 barebone system 5.5.6 Hardware Monitor CPU T emperature [xxxºC/xxxºF] MB T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. Select [Disabled] if you do not wish to display the detected temperatures. CPU Fan Speed [xxxxRPM] or [N/A] Chassis Fan S ...

  • Asus T2-P - page 118

    118 Chapter 5: BIOS setup The following items appear only when the Smart Q-Fan Function item is set to Enabled. VCORE V oltage, +3.3V V oltage, +5V V oltage, +12V V oltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. If any of the monitored items is out of range, the following error m ...

  • Asus T2-P - page 119

    119 ASUS T erminator 2 barebone system 5.6.1 Boot Device Priority 1st ~ xxth Boot Device [1st Floppy Drive] These items specify the boot device priority sequence from the available devices. The number of device items that appear on the screen depends on the the number of devices installed in the system. Configuration options: [xxxxx Drive] [Disable ...

  • Asus T2-P - page 120

    120 Chapter 5: BIOS setup 5.6.2 Removable Drives 1st ~ xxth Drive [1st Floppy Drive] These items specify the boot sequence from the available removable drives. The number of drives that appear on the screen depends on the the number of devices installed in the system. Configuration options: [ xxxxx Drive] [Disabled] Removable Drives 1st Drive [1st ...

  • Asus T2-P - page 121

    121 ASUS T erminator 2 barebone system Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock. Configuration options: [On] [Of f] PS/2 Mouse Support [Auto] Allows you to enable or disable support for PS ...

  • Asus T2-P - page 122

    122 Chapter 5: BIOS setup T ypematic Rate [Fast] Allows you to select the keyboard typematic rate. Configuration options: [Fast] [Slow] Boot to OS/2 [No] Allows you to specify the OS/2 compatibility mode. Configuration options: [No] [Y es] W ait for ‘F1’ If Error [Enabled] When set to Enabled, the system waits for F1 key to be pressed when erro ...

  • Asus T2-P - page 123

    123 ASUS T erminator 2 barebone system 5.6.5 Security The Security menu items allow you to change the system security settings. Select an item then press Enter to display the configuration options. Security Settings Supervisor Password Not Installed User Password Not Installed Change Supervisor Password Boot Sector Virus Protection [Disabled] <E ...

  • Asus T2-P - page 124

    124 Chapter 5: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. Security Settings Supervisor Password Not Installed User Password Not Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sec ...

  • Asus T2-P - page 125

    125 ASUS T erminator 2 barebone system Clear User Password Select this item if you wish to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility . When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Configuration options: ...

  • Asus T2-P - page 126

    126 Chapter 5: BIOS setup Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting. Discard Changes This option allows you to discard the selections you ...

  • Asus T2-P - page 127

    ASUS T erminator 2 barebone system MODE Appendix Appendix The Appendix includes the power supply unit specification and IEEE 802.1 1b channels for the wireless LAN adapter . ...

  • Asus T2-P - page 128

    A-2 Appendix A. 1 Power supply specif ications A.1.1 Input characteristics Input V oltage Range Min Nom Max Range 1 90V 1 15V 132V Range 2 180V 230V 264V Input Frequency Range 47 Hz to 63 Hz Maximum Input AC Current 5A max. at 1 15V ac 3A max. at 230V ac, full load Inrush Current No hazards to occur and damage components Efficiency 65% min. at 1 15 ...

  • Asus T2-P - page 129

    A-3 ASUS T erminator 2 barebone system Channel Center Channel Center Frequency Frequency 1 2.412 GHz 8 2.447 GHz 2 2.417 GHz 9 2.452 GHz 3 2.422 GHz 10 2.457 GHz 4 2.427 GHz 1 1 2.462 GHz 5 2.432 GHz 12 2.467 GHz 6 2.437 GHz 13 2.472 GHz 7 2.442 GHz 14 2.484 GHz A.2 W ireless L AN adapter channels The IEEE 802.1 1b standard for Wireless LAN allocat ...

  • Asus T2-P - page 130

    A-4 Appendix Channels 1, 6 and 1 1 are independent and do not overlap each other . W e recommended that you tune your wireless LAN adapter to these channels. Country/Region (Regulating Body) A vailable Channels Ireland (RTT&E/EMC/L VD) Channels 1 to 13 Italy (RTT&E/EMC/L VD) Channels 1 to 13 Japan (TELEC) Channels 1 to 14* Luxembourg (RTT&a ...

Manufacturer Asus Category Personal Computer

Documents that we receive from a manufacturer of a Asus T2-P can be divided into several groups. They are, among others:
- Asus technical drawings
- T2-P manuals
- Asus product data sheets
- information booklets
- or energy labels Asus T2-P
All of them are important, but the most important information from the point of view of use of the device are in the user manual Asus T2-P.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Asus T2-P, service manual, brief instructions and user manuals Asus T2-P. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Asus T2-P.

Similar manuals

A complete manual for the device Asus T2-P, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Asus T2-P by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Asus T2-P.

A complete Asus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Asus T2-P - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Asus T2-P, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Asus T2-P, that we can find in the current document
3. Tips how to use the basic functions of the device Asus T2-P - which should help us in our first steps of using Asus T2-P
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Asus T2-P
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Asus T2-P in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Asus T2-P?

Use the form below

If you did not solve your problem by using a manual Asus T2-P, ask a question using the form below. If a user had a similar problem with Asus T2-P it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)