English dropdown-ico

Manual Kenwood KDC-X9533U

52 pages 1.32 mb
Download

Go to site of 52

Summary
  • Kenwood KDC-X9533U - page 1

    CD-RECEIVER KDC-X9533U INSTR UCTION MANU AL © B64-3390-00/00 (MW) B64-3390-00_00_M_English.Indd 1 B64-3390-00_00_M_English.Indd 1 06.1.27 1:31:28 PM 06.1.27 1:31:28 PM ...

  • Kenwood KDC-X9533U - page 2

    2 | English Con tents Safety precautions 4 Notes 5 About CDs 6 About USB device 7 About AA C, MP3 and WMA 8 Notes on Multi-function Key S ystem 10 General featur es 11 Pow er Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker Setting Subwoofer Output TEL Mute F aceplate Angle Adj ...

  • Kenwood KDC-X9533U - page 3

    English | 3 The " AAC" logo is trademark of Dolby Laboratories. Menu system 32 Menu System Security Code T ouch Sensor T one Manual Clock Adjustment Date Adjustment Date Mode DSI (Disabled System Indicator) Selectable Illumination Display Illumination Control Dimmer Built-in Amp Setting Dual Zone System Setting B.M.S. (Bass Management Sys ...

  • Kenwood KDC-X9533U - page 4

    4 | English Safety precautions Do Not Load 8 cm (3 in.) CDs in the CD slot If you tr y to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. ...

  • Kenwood KDC-X9533U - page 5

    English | 5 Notes • No USB device comes with this unit. Y ou need to purchase a commercially available USB device . For the types of available USB devices, ref er to <About USB device> (page 7). • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenw ...

  • Kenwood KDC-X9533U - page 6

    6 | English Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. When using a new CD If the CD center hole or outside rim ha ...

  • Kenwood KDC-X9533U - page 7

    English | 7 About USB devic e Notes on Use of the USB devic e This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document). The following restrictions are placed on the types and usage of available USB devices: A vailable USB devices • USB d ...

  • Kenwood KDC-X9533U - page 8

    8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not conforming to the specification, may not play normally , or the file and folder names may not display correctly . Playable A udio file • AAC, MP3, WM A • Attach the cor ...

  • Kenwood KDC-X9533U - page 9

    English | 9 Playing order of the A udio file • The Audio file pla ys in the order which is written by CD writing software. Y ou may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files ar e played in the order the files are written. Y ou c ...

  • Kenwood KDC-X9533U - page 10

    10 | English Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below . What is the Multi-function Key S ystem? This unit is equipped with the Multi-function Key System that enables the operation of multipl ...

  • Kenwood KDC-X9533U - page 11

    English | 11 General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 33) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selec ting the Source Press the [SRC] button. Source required Display ...

  • Kenwood KDC-X9533U - page 12

    12 | English General fea tures Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to adjust Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "SYS.Q" is displayed above the [1] button. Refer to <Notes on Multi-function Ke ...

  • Kenwood KDC-X9533U - page 13

    English | 13 Adjusting the detail of A udio Con t ro l Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Treble lev el in detail. 1 Select the Basic Audio item Select the desired item to be set in detail from followings; • Bass level • Middle level • T reble level F or how to select Basic Audio items, see <Audi ...

  • Kenwood KDC-X9533U - page 14

    14 | English General fea tures Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source to adjust Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates be ...

  • Kenwood KDC-X9533U - page 15

    English | 15 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL ...

  • Kenwood KDC-X9533U - page 16

    16 | English General fea tures Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receiv e/play the station/disc you w ant to attach a title to • A title cannot be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 3 Select Name set mode Push ...

  • Kenwood KDC-X9533U - page 17

    English | 17 "Display T ype D" 4 7 6 8 8 8 8 8 8 1 Graphic display part 2 T ext display par t 3 T ext icon display par t 4 Upper text display part 5 Middle text display par t 6 Lower text display part 7 Source icon display part 8 F unction item display 5 Exit display c ontrol mode Press the [6] ("RTN") button. • Under the disp ...

  • Kenwood KDC-X9533U - page 18

    18 | English General fea tures Display T ype B T ext Selec tion for Display Selecting the text display. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 10). 2 Enter display c ontrol mode Press th ...

  • Kenwood KDC-X9533U - page 19

    English | 19 Display T ype C/ Display T ype D T ext Display Switching Changing the text display . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 10). 2 Enter display c ontrol mode Press the [2] ...

  • Kenwood KDC-X9533U - page 20

    20 | English General fea tures The text display in the Upper te xt display part In T uner source Information Display Station name "SNPS"* Fr equency "Frequency" Spectrum Analyzer & Clock "Speana/Clock" Date "Date" In CD & External disc source Information Display Disc title "Disc Title"* T ra ...

  • Kenwood KDC-X9533U - page 21

    English | 21 The text display in the L ower text display part In T uner source Information Display Indicator "Sta tus" Spectrum Analyzer & Clock "Speana/Clock" Date "Date" Blank "Blank" In CD & External disc source Information Display Indicator "Sta tus" Spectrum Analyzer & Clock "S ...

  • Kenwood KDC-X9533U - page 22

    22 | English T uner/T V control f eatures T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands. 3 T une up or down band Push the Con ...

  • Kenwood KDC-X9533U - page 23

    English | 23 F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the r emote control. Ex ...

  • Kenwood KDC-X9533U - page 24

    24 | English T uner/T V control f eatures F unction of LX BUS T elevision TV T uning Selecting the TV channel of a connected LX BUS T elevision (optional accessor y). The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details. 1 Select T V sourc e Press the [SRC] button ...

  • Kenwood KDC-X9533U - page 25

    English | 25 CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When there is no disc inserted 1 Open the panel Press the [ 0 ] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function. If this happens, pay attention to saf ety and move the shi ...

  • Kenwood KDC-X9533U - page 26

    26 | English CD/USB device/A udio file/External disc control f eatures Playing USB devic e Playing USB devic e 1 Select a source other than the USB device Press the [SRC] button. 2 C onnect the USB device. 3 Select USB source Press the [SRC] button. Select the "USB" display. • For the types of available USB devices and how t o connect U ...

  • Kenwood KDC-X9533U - page 27

    English | 27 F unction of disc changer/ Audio file Disc Search/F older Search Selecting the disc set in the Disc changer or the folder recor ded on the Audio file media. Push the Contr ol knob towards [FM] or [ AM]. F unction of remote control Direct T rack/File Search Doing T rack/File Search by ent ering the track/file number . 1 Enter the track/ ...

  • Kenwood KDC-X9533U - page 28

    28 | English CD/USB device/A udio file/External disc control f eatures Random Play Play all the songs on the disc or Audio file f older in random order . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. Refer to <Notes on Multi-function Key System> ...

  • Kenwood KDC-X9533U - page 29

    English | 29 F unction of ACDrive media Switching the Pla y mode Arrange the playing orders of the songs by categories. 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "S.MODE" is displayed above the [1] button. Refer to <Notes on Multi-function Key System> (page 10). 2 Select the Play mo ...

  • Kenwood KDC-X9533U - page 30

    30 | English CD/USB device/A udio file/External disc control f eatures F unction of Audio file Select mode Quickly selecting the file or folder you want to hear . 1 Select the key function section Press the [NEXT] button. Repeatedly press the button until "FSEL " is displayed above the [5] button. Refer to <Notes on Multi-function Key ...

  • Kenwood KDC-X9533U - page 31

    English | 31 F unction of Audio file Folder Select 2 mode Select the target folder within the folders containing audio files. The folder which c ontains playable audio files is only displayed . 1 Enter F older Select 2 mode Press the [5] ("FSEL ") button. Select the "FOLDER SELEC T2" display . Refer to <Select mode> (page ...

  • Kenwood KDC-X9533U - page 32

    32 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 2 Sele ...

  • Kenwood KDC-X9533U - page 33

    English | 33 In Standby mode Secur ity C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle. Indication of this Security Code activation prevents your precious audio u ...

  • Kenwood KDC-X9533U - page 34

    34 | English Menu system In Standby mode Date Adjustmen t 1 Select Date Adjust mode Push the knob towards [F M] or [AM]. Select the "Date Adjust" display . 2 Enter Date A djust mode Press the C ontrol knob for at least 1 second. The date display blinks. 3 Selecting the item (day , month, or year) to adjust Push the Contr ol knob towards [ ...

  • Kenwood KDC-X9533U - page 35

    English | 35 Display Illumination C ontrol This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display Setting "Display : ON" Keeps the display on. "Display : OFF" T urns off the display when you perform no operation for 5 seconds . • When t ...

  • Kenwood KDC-X9533U - page 36

    36 | English Menu system In FM reception CRSC ( Clean Reception Sy stem Circuit) T emporarily have reception alternate fr om stereo to mono to r educe multi-path noise when listening to the FM station. Display Setting "CRSC : ON" The CRSC is ON. "CRSC : OFF" The CRSC is OFF . • Strong electrical fields (such as from power line ...

  • Kenwood KDC-X9533U - page 37

    English | 37 T ext Scroll Setting the displayed text scroll. Display Setting "Scroll : Aut o" Repeats scroll . "Scroll : Manual" Scrolls when the display changes. • The text scrolled is listed below . - CD tex t - F older name/ File name/ Song title/ Artist name/ Album name - MD title In Standby mode Built-in Auxiliary input S ...

  • Kenwood KDC-X9533U - page 38

    38 | English Menu system Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 38). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 3 Select Audio Preset mode Push the Contr ol knob towards ...

  • Kenwood KDC-X9533U - page 39

    English | 39 Basic Operations of r emote control Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case . 2 W ARNING • Store unused ...

  • Kenwood KDC-X9533U - page 40

    40 | English Basic Operations of r emote control Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 12) for the operation method, such as the procedures f or Audio control and others operations. • The remote control can only select and adjust the Basi ...

  • Kenwood KDC-X9533U - page 41

    English | 41 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remov e the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wire ...

  • Kenwood KDC-X9533U - page 42

    42 | English Connecting W ires to T erminals ANT . CONT MUTE P .CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT SUB WOOFER AUX IN REAR FM/AM antenna input Fr ont left output ( Whit e) Fr ont right output (Red) F use (10A) Wiring harness (Accessory 1 ) White/Black Gray/Black Green/Black Purple/Black White Gray Green Purple T o front l ...

  • Kenwood KDC-X9533U - page 43

    English | 43 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 45) and then remove the hard rubber frame. 2 Align the holes in the unit (two locatio ...

  • Kenwood KDC-X9533U - page 44

    44 | English Installation Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will con ...

  • Kenwood KDC-X9533U - page 45

    English | 45 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, remove the lower two locations. • The frame can be removed from the bottom side in the same manner . ...

  • Kenwood KDC-X9533U - page 46

    46 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ Af ter checking for short circuits in the wires, replac ...

  • Kenwood KDC-X9533U - page 47

    English | 47 T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way. ✔ The ant enna control wire is not connected. ☞ Connec t the wire correctly , referring to the section on <Connecting Wir es to T erminals>. ? The desired frequency can ’t be entered with the Direct Access T ...

  • Kenwood KDC-X9533U - page 48

    48 | English Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6). ? The sound skips when an Audio file is being played . ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the se ...

  • Kenwood KDC-X9533U - page 49

    English | 49 Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playing again. No Name: Atte ...

  • Kenwood KDC-X9533U - page 50

    50 | English Specifications FM tuner section Fr equency range (50 kHz space) : 87.5 MH z – 108.0 MHz (200 kHz space): 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV /75 Ω) Fr equency response (±3.0 dB) : 30 Hz – 15 kH z Signal to Noise ratio (MONO) : 70 dB ...

  • Kenwood KDC-X9533U - page 51

    B64-3390-00_00_M_English.Indd 51 B64-3390-00_00_M_English.Indd 51 06.1.27 1:31:58 PM 06.1.27 1:31:58 PM ...

  • Kenwood KDC-X9533U - page 52

    B64-3390-00_00_M_English.Indd 52 B64-3390-00_00_M_English.Indd 52 06.1.27 1:31:58 PM 06.1.27 1:31:58 PM ...

Manufacturer Kenwood Category CD Player

Documents that we receive from a manufacturer of a Kenwood KDC-X9533U can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-X9533U manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-X9533U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-X9533U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-X9533U, service manual, brief instructions and user manuals Kenwood KDC-X9533U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-X9533U.

Similar manuals

A complete manual for the device Kenwood KDC-X9533U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-X9533U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-X9533U.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-X9533U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-X9533U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-X9533U, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-X9533U - which should help us in our first steps of using Kenwood KDC-X9533U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-X9533U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-X9533U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-X9533U?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-X9533U, ask a question using the form below. If a user had a similar problem with Kenwood KDC-X9533U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)