-
Approach Tech DVR-3024 - page 1
Before trying to connect or operate this product, please read this manual complete ly INST ALLA TION & OPERA TI ON MANU AL Digital Video Recorder DVR-3024 & DVR-3024D ...
-
Approach Tech DVR-3024 - page 2
...
-
Approach Tech DVR-3024 - page 3
1 SAFETY PRECAUTIONS All the following safety and operated instructio ns wh ich will prevent harm o r damage to the operator and other persons should be read befo re the unit is operated. INFORMATION This equipment has be en tested and found to comply with the limits for a Cla ss A digital device, pursuant to Part 15 of the FCC Rules. These limits ...
-
Approach Tech DVR-3024 - page 4
2 1. INTR ODUCTION ................................. 3 1.1 Product Introduction .................................. 3 1.2 Product Features ...................................... 3 1.3. FRONT / REAR VIEW ............................. 4 1.3.1 Front Vi ew ............................................. 4 1.3.2 Rear View................................... ...
-
Approach Tech DVR-3024 - page 5
3 1. INTRODUCTION 1.1 Product Introduction This DVR-3024 is a storage medi a of digital video image, which uses hard disk drives instead of VCR tap es to store video. It enables you to enjoy the extreme flexibility of digital image archiving in stead of clumsy t ape management. Equipped with a range of comprehensive feature s, such as playback pict ...
-
Approach Tech DVR-3024 - page 6
4 Power Display Enter ZOOM Seq./Save Setup PLAY STOP REC FWD REV PAUSE A-rec Search T-rec Power DISK 1 3 4 5 6 7 8 9 10 11 14 13 12 15 16 17 18 19 20 21 22 2 23 24 1.3. FRONT / REAR VIEW 1.3.1 Front V iew FOR CD-ROM MODEL FOR REMOV ABLE HDD MODEL 1 CD-RW dev ice compar tment : The compart ment allows you to burn the data mostly for backup purposes. ...
-
Approach Tech DVR-3024 - page 7
5 3 PA U S E button: In a playback display , press this to freeze the di splay . During the freeze, press it to display one frame/field of a picture at a time in the forward direction. (Illuminate green in P AUSE mode.) 4 PLA Y button: Press to play back a recorded video from the hard disk. (Illuminate g reen in PLA Y mode.) 5 STOP button: Press to ...
-
Approach Tech DVR-3024 - page 8
6 the hard-disk drive is storin g or retrieving dat a. The red light signal s the hard-disk drive is filling up. The orange light indicates the hard-disk is retrieving at disk-full status. 20 Shuttle Ring: The shuttle can be moved forward and backward for playback in either dire ction. T urn this left to play a recorded video in the reverse directi ...
-
Approach Tech DVR-3024 - page 9
7 SD Card RS-232 ALARM DC12V RS-485 hi-z 75 AUDIO IN IN OUT OUT MONITOR ETHERNET I/O 25 31 32 33 27 26 28 29 30 34 35 36 37 1.3.2 Rear V iew 25 VIDEO IN Connector : These 4 BNC connectors are used to conne ct the video output from a camera 26 Hi-Z/75 Ω Individual termination: These 4 switches are used to set the impedance of each loop between 75 ...
-
Approach Tech DVR-3024 - page 10
8 ALARM1 IN ALARM4 IN ALARM2 IN ALARM3 IN ALARM OUT RECORD IN GROUND DISK FULL ALARM RESET 1 2 3 4 5 6 7 8 9 5V 0V(Active) 5V 0V(Active) 1.4 ALARM In / Out The above figure is the rear v iew. 1. GND: Ground Cont act. 2. ALARM OUT (OUTPUT): This is an alarm output trigger . Connect this to external devices such a s buzzers or lights. 5V 0V(Active) 3 ...
-
Approach Tech DVR-3024 - page 11
9 Camera Monitor Camera Camera Camera SD Card RS-232 ALARM DC12V RS-485 hi-z 75 AUDIO IN IN OUT OUT MONITOR ETHERNET I/O SD Card RS-232 ALARM DC12V RS-485 hi-z 75 AUDIO IN IN OUT OUT MONITOR ETHERNET I/O 1 2 3 4 5 6 7 8 9 Alarm Reset (Normally Open) (Normally Open) Alarm1 in (Normally Open) Alarm2 in (Normally Open) Alarm3 in (Normally Open) Alarm4 ...
-
Approach Tech DVR-3024 - page 12
10 2.2 Hard-disk Drive Inst allation The DVR is equipped with two comp artments of hard disk drive (for removable model only). The unit usually come s with one hard-disk drive inst alled in the compartment of HD1, which is default- configured as a master . If you need a second hard-disk drive to be installed in the comp artment of HD2 (Mobile), ple ...
-
Approach Tech DVR-3024 - page 13
11 T able 3.2 B. Compatible hard-disk dri ves Manufacturer Model Cap acity Rot ation ST340810A 40G 5400 RPM ST380020A 80G 5400 RPM ST320014A 20G 5400 RPM ST340015A 40G 5400 RPM ST380012ACE 80G 5400 RPM ST3120025ACE 120G 5400 RPM ST340014A 40G 7200 RPM ST38001 1A 80G 7200 RPM ST380013A 80G 7200 RPM ST3120026A 120G 7200 RPM ST3160023A 160G 7200 RPM S ...
-
Approach Tech DVR-3024 - page 14
12 CH1 CH2 CH3 CH4 01/01/2005 1 2:00:00 2.3 System Information and Channel Selection 2.3.1 System information Y ou can display system settings information as shown in FIGURE 3.3 A below at any time by pressing the Display button 8 . In the playback mode, the recorded video information is displayed. In the live or recording mode, the Manual Recordin ...
-
Approach Tech DVR-3024 - page 15
13 Mode Key Result Display Quad ( ) CH1/ CH2/ CH3/ CH4 ( Single channel ) Live / Record Seq./ Save then loop back Quad ( ) Playback CH1/ CH2/ CH3/ CH4 ( Single channel ) 2.4 Up dating System Software Please take the following steps to safely update it. 1. Turn off the DVR. 2. Insert the SD card into the built-in SD sl ot of the unit ...
-
Approach Tech DVR-3024 - page 16
14 3. OPERA TIONS This section shows you how to operate and manage the DVR when it get s in the way . 3.1 Configuring Recording Settings Recording time will vary depending on the image size, recording rate, and the cap acity of the hard-disk drives. Generally , the DVR comes with a built-in hard-disk drive for continuou s recording from one to four ...
-
Approach Tech DVR-3024 - page 17
15 P AL (Audio OFF) Possible Recording Ti me HDD=20GB ( hour ) BEST 3.4 6.0 9.0 15.0 27.1 51.1 99.3 171.6 605.3 906.4 1207.6 HIGH 3.6 7.2 10.8 18.0 32.5 61.4 1 19.2 205.9 726.3 1087.7 1449.1 ST AN DARD 4.5 9.0 13.5 22.5 40.6 76.7 149.0 257.4 907.9 1359.7 181 1.4 Image Quality BASIC 5.7 11 . 4 17.1 28.5 51.3 97.0 188.3 325.2 11 4 6 . 9 1717.5 2288.1 ...
-
Approach Tech DVR-3024 - page 18
16 00 :00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 REC SCHEDULE OK ST ART END 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 ST ART END CANCEL S M T W T F S TO MOVE TO CHANGE RECORD ALARM / MOTION TIMER/ S EQ/ TITLE COMMUNICA TION DISK SYSTEM MAIN MENU GOTO CLOC ...
-
Approach Tech DVR-3024 - page 19
17 ALM OPERA TIO N REC RA TE REC QUALITY AUDIO ALM TYPE ALM DURA TION PRE-ALARM MOTION SETTING ALARM/ MOTION MAIN P AGE : OFF : 30 F/S : BEST : OFF : NO : 0 SEC : OFF ALM OPERA TION REC RA TE REC QUALITY AUDIO ALM TYPE ALM DURA TIO N PRE-ALARM MOTION SETTING ALARM/ MOTI ON MAIN P AGE : ON : 30 F/S : BEST : OFF : NO : 0 SEC : OFF RECORD ALARM / MOTI ...
-
Approach Tech DVR-3024 - page 20
18 1 2 3 4 Manual or External ly T rigge red Reco rdin g Al arm T a kes Place Actu al Recordi ng Speed Norma l Ala rm Norma l Tim e r Rec or d in g Actu al Recordi ng Speed Al arm T a kes Place Tim e r Rec or d in g Actu al Recordi ng Speed Al arm T a kes Place Tim e r Rec or d in g Actu al Recordi ng Speed Al arm T a kes Place Norma l Ala rm Norma ...
-
Approach Tech DVR-3024 - page 21
19 3.3 Playback Operations This section shows you how to operate the fast, slow , and single-picture playba ck functions, and details h ow the unit is to playback a file in a different op eration status . Please refer to the following paragraph s specifying the relevant details. When playing a file, the monitor should display a flashing PLA Y messa ...
-
Approach Tech DVR-3024 - page 22
20 Live Playb ack Each subsequent turn of the shuttle to the right increases the forward rate, as 1/2, 1/4, 1/8, and 1/16. (3) Reverse: T urn the Shuttle dial 20 to the left to view the recorded video in the reverse direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the left increase s the reverse rate, as - ...
-
Approach Tech DVR-3024 - page 23
21 1 08-1 1-04 21:47:55 28.3G 2 08-12-04 06:55:58 8 .03G 3 08-12-04 10:02:15 1 .00G 4 08-12-04 12:42:31 1 8.0M 5 08-12-04 12:42:47 1 0.0M HD1 A 1 08-12-04 10:02:15 1.00G A 2 08-12-04 12:42:31 18.0M A 3 08-12-04 12:42:47 10.0M HD1 3.4 Search Operations This section sho ws you how t o access recorded video. 3.4.1 FULL LIST Search T ake the following ...
-
Approach Tech DVR-3024 - page 24
22 00:00:00 00:00:00 01: 00:00 02:00:00 03 :00:00 04:00: 00 05:00:00 06:00:00 07:00:00 08 :00:00 09:00:00 10:00:0 0 11:00:00 12:00:00 13:00:00 14:00:00 15:00:0 0 16:00:00 17:00:00 18:00:00 19:00: 00 20:00:00 21:00:00 22: 00:00 23:00:00 2004:10:20 LEVEL : 1 1 HR 15:00:00 1 5:10: 00 15:20:00 15:30:00 1 5:40: 00 15:50:00 2004:10:20 LEVEL : 2 10 MIN MM ...
-
Approach Tech DVR-3024 - page 25
23 F0000.JPG F0001.JPG F0002.JPG F0003.JPG F0004.JPG SD CARD JPEG FI LE 15:30:0 0 15:31:00 15:3 2:00 15:33:00 15:34:0 0 15:35 :00 15:36: 00 15:37:00 15:38:0 0 15:39: 00 2004:10: 20 LEVEL : 3 1 MIN 15:35:00 15:35:10 15:35:20 15:35:30 15:35:40 15:35:50 2004:10:20 LEVEL : 4 10 SEC 15:35:30 15:35:31 15:35:32 15:35:33 15:35:34 15:35:35 15:35:36 15:35:37 ...
-
Approach Tech DVR-3024 - page 26
24 requirement and p ress the Enter button 15 to display the image. (5) If you need another , please press the Enter button 15 to return to the CD MENU page and repeat step (4) again for another search. (“CD” ST ANDS FOR THE C D-ROM MODEL AND “BACKUP” INDICA TES THE REMOV ABLE HDD MODEL ONL Y IN ITEM 6.) NOTE: If by accident one sele ct s a ...
-
Approach Tech DVR-3024 - page 27
25 3.5 Backup Operations 3.5.1 CD Rewritable unit Backup Operations (FOR CD-ROM MODEL ONL Y) This device now includes a CD-RW unit. (1) SD JPEG: Archive single image clips into an SD card. i ) Insert an SD Card into the SD card sl ot of the rear unit. ii ) Play the video back to find your desired item. Press PAUSE button when yo u find it. iii ) Pr ...
-
Approach Tech DVR-3024 - page 28
26 RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA TION DISK SYSTEM MAIN MENU GOTO DIS K P AGE RECORD ALARM / MOTION CLOCK/ T IMER COMMUNI CA TION DISK SYSTEM MAIN MENU GOTO DISK P AGE Hear that beeping signal to confirm you r disc is ready. ii ) Play the video back to find your desi red item. Press PAUSE when you want to start. iii ) Press the Seq./S ...
-
Approach Tech DVR-3024 - page 29
27 RECORD ALARM / MOT ION CLOCK/ TI MER COMMUNICATION DISK SYSTEM MAIN MENU GOTO DISK P AGE 1 08-1 1-04 21:47:55 28.3G 2 08-12-04 06:55:58 8.03G A 3 08-12-04 10:02:15 1.00G + A 4 08-12-04 12:42:31 18.0 M + A 5 08-12-04 12:42:47 10.0M HD1 READY TO GO TOTAL : 41M OK CANCEL RECORD ALARM / MOTION CLOCK/ TIME R COMMUNICA TION DISK SYSTEM MAIN MENU GOTO ...
-
Approach Tech DVR-3024 - page 30
28 (1) Press the Setup button 9 to enter the setup mode and select the DISK . (2) Highlight DISK and press the Enter button 15 to enter the DISK SETTING page . (3) Then set SD FILE to JPEG . (4) Inse rt an SD Card into the SD ca rd slot of the rear unit. (5) S tart playing back the recorde d video. (6) Press the P AUSE button 3 to freeze the desire ...
-
Approach Tech DVR-3024 - page 31
29 RECORD ALARM / MO TION CLOCK/ TIM ER COMMUN ICA TION DISK SYSTEM MAIN MENU GOTO SYSTEM P AGE SYSTEM OPERA TION LOG MENU BACKGND BUZZER P ASSWORD SETUP PWD DEF AU L T VERSION LOAD MAIN P AGE SD / CD SETUP SA VE 3.5.4 Backup the System setting info into an SD card. The DVR offers a quick setup method by using the SD card. If a user want s to set m ...
-
Approach Tech DVR-3024 - page 32
30 4. MENU SETUP RECORD ALARM/ MOTION TIMER/ SEQ/ TITLE COMMUNICA TION DISK SYSTEM MAIN MENU GOTO REC P AGE RECORD ALARM/ MOTION TIMER/ SEQ/ TIT LE COMMUNICA TION DISK SYSTEM MAIN MENU GOTO REC P AGE 4. MENU SETUP There are 6 categories fo r operation setting in the menu setup system as shown below . The following sections will instruct you step by ...
-
Approach Tech DVR-3024 - page 33
31 RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA T ION DISK SYSTEM MAIN MENU GOTO ALARM/ MOTION P AGE ALM OPERA TIO N REC RA TE REC QUALI TY AUDIO ALM TYPE ALM DURA T ION PRE-ALARM MOTION SETTI NG ALARM/ MOTION MAIN P AGE : OFF : 30 F/S : BEST : OFF : NO : 0 SEC : OFF RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA TI ON DISK SYSTEM MAIN M ENU GOTO ALA ...
-
Approach Tech DVR-3024 - page 34
32 Dur at i on Set ting Alar m acti va ted Alarm deactivated Re s et Al arm rec ordin g Non - S t op Alar m acti va ted Alarm deactivated Dur at io n Al arm rec ordin g Dur at io n REC RA TE: This option is for the purpose of adjusting the number of pictures re corded every second into a storage disk when an alarm input is activated. For an NTSC un ...
-
Approach Tech DVR-3024 - page 35
33 CH1 CH2 CH3 CH4 SENSITIVITY MOTION SETTING MAIN P AGE : ON : OFF : OFF : OFF : 3 RECORD ALARM / MOTION TIMER/ SEQ/ TITLE COMMUNI CA TION DISK SYSTEM MAIN MENU GOTO CLOCK/ TIMER P AGE RECORD ALARM / MOTION TIMER/ SEQ/ TITLE COMMUNICA TION DISK SYSTEM MAIN MENU GOTO CLOCK / TIMER P AGE CLOCK DA YLIGHT SA VING REC ENABLE TIMER SEQUENCER TITLE TIMER ...
-
Approach Tech DVR-3024 - page 36
34 00 :00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 REC SCHEDULE OK ST ART END 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 00:00- 00:00 ST ART END CANCEL TO M O VE TO CHANGE S M T W T F S RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA TION DISK SYSTEM MAIN MENU GOTO COMM P A ...
-
Approach Tech DVR-3024 - page 37
35 RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA TIO N DISK SYSTEM MAIN MENU GOTO COMM P AGE COMM ID: Communication ID is for RS232 a nd RS485 communication. After th e DVR receives a RS232 or RS485 command, it checks if the <Dest ID> within the code is the sam e as the COMM ID, in which case the particular command can be acce pted. RS-232: Th ...
-
Approach Tech DVR-3024 - page 38
36 FTP IP USER PA S S W O R D PAT H FTP ACCOUNT MAIN P AGE : 192.168.001.128 : [dvr ] : [00000000 ] : [/dvrvideo ] RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICATION DISK SYSTEM MAIN M ENU GOTO DISK P AGE ENABLE: This option select s either to enable or disable as options for the FTP function. ON: Enables it. OFF: Disables it. REC MODE: This option d ...
-
Approach Tech DVR-3024 - page 39
37 RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA TION DISK SYSTEM MAIN MENU GOTO SYSTEM P AGE purpose only . (This function has to be proceeded with when the HD 2 USAGE option is set to BACKUP .) NOTE: In the case of the CD-RW model, only one HD can be reformatted. No backup HD can be used. HD2 USAGE : This option determines th e way to utilize the ...
-
Approach Tech DVR-3024 - page 40
38 RECORD ALARM / MOTI ON CLOCK/ TIMER COMMUNICA T ION DISK SYSTEM MAIN MENU GOTO SYSTEM P AGE 05/15/04 18:19:30 05/15/04 18:19:36 05/15/04 18:23:10 05/15/04 18:23:50 05/15/04 18:25:05 05/15/04 18:27:12 05/15/04 18:50:30 05/15/04 18:51:20 LOG ON OFF ON REC STOP V- L O S S PLA Y STOP-P This page is use d for accessing the history of the operation st ...
-
Approach Tech DVR-3024 - page 41
39 SETUP PWD: When this option is on, the user mu st pass the password check before entering the setup menu. ON: Enables pass protec tion for the setup menu. OFF: Disables pass prote ction for the setup menu. DEF AUL T : This option allows you to relo ad the factory default setting. Please do note that the password will not be changed in the fa cto ...
-
Approach Tech DVR-3024 - page 42
40 5. NETWORK 5.1 Network Configuration 5.1.1 Cable Connections Please follow the instructions belo w to connect your DVR to a computer or a network and to choose a proper RJ-45 cable configuration for connections. Physical S pec. of RJ-45 Ca ble for Ethernet Wire T ype Cat. 5 Connector T ype RJ-45 Max. Cable Length 30 m Hub Wiring Configuration S ...
-
Approach Tech DVR-3024 - page 43
41 RECORD ALARM / MOTION CLOCK/ TIMER COMMUNICA T ION DISK SYSTEM MAIN MENU GOTO COMM P AGE RECORD ALARM / MOT ION CLOCK/ TI MER COMMUNICATION DISK SYSTEM MAIN MENU GOTO COMM PAGE RECORD ALARM / MOTION CLOCK/ T IMER COMMUNI CA TION DISK SYSTEM MAIN MENU GOTO COMM P AGE RJ-45 PIN configuration for LAN Hub 5.1.2 Configure Y our DVR Network Settings U ...
-
Approach Tech DVR-3024 - page 44
42 Y ou don’t need to set a NET IP for the unit if the LAN, which the unit is connected to, has a DHCP server . Otherwise, please follow the instructions given below: Enter the NET IP page and set the IP , MASK and GA TEWA Y . Then press the Enter button to proceed. The following is a sample setting. IP: 192.168.1.100 MASK: 255.255.255.0 GA TEW A ...
-
Approach Tech DVR-3024 - page 45
43 5.1.3 TCP/IP Communica tion Setup Follow the instructions below to install the TCP/IP com munication program into your computer . 1 . Click the Star t Menu from your computer , and point to the Control p anel. 2. Click the Netw ork Connections icon twice to enter the Network setting windows. Point to the Local Area Connection and click the right ...
-
Approach Tech DVR-3024 - page 46
44 5 TCP/IP Configuration setting Click Sta r t → Control Panel → Net work . Connections → Local Area Connection Select Internet Protocol (TCP/IP) , and then click Properties . Befo re proces sing the DVR installation in a W AN, please make sure the Internet connection works properly . If not, please contact your ISP provider . If ...
-
Approach Tech DVR-3024 - page 47
45 5.1.4 Connection T esting With the previous settings, follow the instructions below to ensure wh ether you have esta blished the connecti on successfully . 1 . Click Star t → Command Programs 2 . T ype in ping 192.168.1.1 then Enter . (See the sample screen below) ** This IP is the DVR IP address which is assigned for the conne cted DVR . 3. I ...
-
Approach Tech DVR-3024 - page 48
46 5.2 TRIPLEX 4 CH DVR VIEWER SOFTW ARE: Introduction This version of the TRIP LEX 4 CH DVR Viewer Software uses the Microsoft .Net Framework version. The .Net Fram ework performs the XML Web Services, which applies this operation system. The .Net Framework provides a very high performan ce environment to solve the network program. Therefore, plea ...
-
Approach Tech DVR-3024 - page 49
47 ※ Note: Please choose th e "Next" button to continue. Step 4: The installation screen will show the message " C:Program Files Vie w er Sof tware". Or you can select the path you want. ※ Note: Click "Next" to continue the installation. Step 5 : The window belo w tells you the process is complete. ※ Note: Cli ...
-
Approach Tech DVR-3024 - page 50
48 5.2.2.1 Program introduction 【 A vailable Dev ices 】 ： Here the whole DVR list is shown. You can connect with your selection. Double click any of them to open the screen below. Please enter the correct "Username" and "Password" to log into this DVR. The default "Username" and "Pass word" are "ad ...
-
Approach Tech DVR-3024 - page 51
49 the full screen for surveillance. All the setting buttons will be hidden in this mode. If you want to return to the previous mode, use the mouse to cli ck the right key, and choose "Close" . 4. Re-arrange the divi sions: Click this button to see the following channel s. 5. Screen divisions: Choose any of the buttons you want. 6. LAN or ...
-
Approach Tech DVR-3024 - page 52
50 5.2.3.2.1 Remote play This device has the full triplex so you can use the Viewer Software in the remote without affecting the performance of the 4 - channel DVR. You can also use the Viewer Softwa re to play and back up. If you have a PTZ camera, the Viewer Software can also control it. “Play ": Click it to see the DVR play window. Use th ...
-
Approach Tech DVR-3024 - page 53
51 6. The ‘AutoPan’ section has three buttons. The ‘S tart’ and ‘End’ buttons fix the two points of any p anning movement you select. The third or bottom button sets the chosen movement in the play mode. 5.2.3.3 Backup and video edit Use the button to see the "Backup" window. 【 Backup up to A VI 】 ： Backup Settings ： ? ...
-
Approach Tech DVR-3024 - page 54
52 ● Mark Day and Time : Sets the date and time stamp. Play Options ： ● Time to play: To se arch the date and time you want. ● Chan nel Number: To choose the camera. Play Monitor ： ● Use the pane l below to play or stop, etc. If you already want to back up, click the "Start backup" button. If you want to stop, click the " ...
-
Approach Tech DVR-3024 - page 55
53 5.2.3.5 Vie wer setting 1. "Channel Notation". If you wish to change the "Display Mod e" , open its drop - down list and select any of the four items there. Your choi ce will automatically appear in the relevant blank space. Similarly you can enter the "Fill Color" and "Border Color" entries to open their ...
-
Approach Tech DVR-3024 - page 56
54 Browsing images from the DVR The images from the DVR will be displayed on the home page whil e going online with the DVR. There are some buttons provided at the bottom of the home page for furthe r setting. Description Click to stop playing back the recorded video. Click to a recorded video from the PLA Y LIST . Click to freeze the image. Click ...
-
Approach Tech DVR-3024 - page 57
55 3. Click the button to submit the new Record / Alarm setting. 4. Click the button to return to the home page while the ne w image setting act s on the images to effect the desired chang es instantly . (If the setting has not been changed by the above steps, any (re)entry to the home p age will find images in their earlier or original setting. ) ...
-
Approach Tech DVR-3024 - page 58
56 6. MISCELLANEOUS 6.1 RS-232 & RS-485 Setup & Protocol 6.1.1 RS232 & RS485 Setup Use a Null Modem ca ble (the standard RS-232 9 Pin Cabl e with Pin 2 and Pin 3 exch anged, see pin configuration chart below for details) to con nect the COM 1 on the rear panel of the DVR to a PC. Set the RS-232 option to ON in the COMMUNICA TION page of ...
-
Approach Tech DVR-3024 - page 59
57 6.1.2.1 Ke ys and signals ( Main Category = 0x01 ) PC Send: <0x41>, <0x01>, <0x 20>, <0x01>, <Key V alue>, <0x4f> < The value of a specific front p anel key > D E C H E X KEY_PLA Y 1 0x01 KEY_STOP 3 0x 03 KEY_P AUSE 4 0x 04 KEY_REC 6 0x 06 KEY_SETUP 7 0x 07 KEY_ENTER 8 0x 08 KEY_SEARCH 10 0x 0A KEY_DISPL ...
-
Approach Tech DVR-3024 - page 60
58 2004/06/20 17:05:00 = <0xD4 >, <0x07>, <0x06>, <0x14>, <0x1 1>, <0x05>, <0x00> DVR Act: Changing the time and date. D. Request S t ate (Second Category =0x06) PC Request: <0x41>, <0 x01>, <0x20>, <0x02> , <0x06>, <0x00> , <0x4f> DVR Response: <0x41>, <0x ...
-
Approach Tech DVR-3024 - page 61
59 6.2 Hard Disk Inst allation Usually , the unit comes with one hard-di sk drive install ed in comp artment HD 1, which is default-configured as a m aster . The jumper settings configuration of the inst alled hard-disk drives for the unit and comp atible drives wh ich can be used wi th this unit a re listed in the table bel ow . T o install two ha ...
-
Approach Tech DVR-3024 - page 62
60 9 . Place the mobile rack back onto the device and screwing in all the 4 screw s. 6.2.2 Mobile Rack ( FOR REMOV ABLE HDD MODEL) 1. Make sure that the key is unlocked. 2. Pull the active-handle outward to detach the carrier body from the mobile rack. 3. Slide the top cover backward and remove. 4. Setting the jumper of your hard disk driver . The ...
-
Approach Tech DVR-3024 - page 63
61 5. Attach the interface connecto r and the power connector to the drive. Please note the red lining of the IDE cable and the red wire of power cable must line up side by side. 6. Place the HDD inside mobile rack. Use four of the provided screws. 7. Place the top cover back to the carrier body by sliding forward to secure. 8. Slide the carrier bo ...
-
Approach Tech DVR-3024 - page 64
62 RECORD ALARM/ MOTION CLOCK/ TIMER COMMUNICA TION DISK SYSTEM SETUP MENU 1 2 3 4 5 6 ALM OPERA TION REC RA TE REC QUALITY AUDIO ALM TYPE ALM DURA TION PRE-ALARM MOTION SETTI NG ALARM/ MOTION MAIN P AGE : OFF : 15 F/S : BEST : OFF : NO : 0 SEC : OFF CLOCK DA YLIGHT SA VING REC ENABLE TIMER SEQUENCER TITLE TIMER/ SEQ/ TITLE MAIN P AGE : SET : OFF : ...
-
Approach Tech DVR-3024 - page 65
63 6.4 O.S.D Message No. O.S.D Message Meanings 1 NO DIS K No hard-disk detected after power a ctivated 2 BA TTERY LOW Suggest change the battery and reset the system time 3 LOADING System Boot up 4 VIDEO LOSS Video lo ss 5 VIDEO IN Video inp ut source 6 KEY LOCKED Key lock function is on 7 KEY UNLOCKED Key lock function is off 8 n1 OF n2 ITEMS PRO ...
-
Approach Tech DVR-3024 - page 66
64 6.5 T ime Index T able HD1 HD1 1 12-02-03 12:20:55 1 12-02-03 12:20:55 2 12-02-03 13:30:33 2 01-30-04 16:00:34 3 01-30-04 16:00:34 : : : : : : 2999 02-03-04 16:00:56 3000 Indexes 3000 02-03-04 16:00:56 3000 02-08-04 17:30:58 3000 Indexes The DVR will generate a T ime Index T able indicating recorded dat a is kept in a particul ar HDD. This allow ...
-
Approach Tech DVR-3024 - page 67
65 6.6 S pecifications Model Number DVR-3024 DVR-3024D Image System NTSC/P AL Resolution NTSC: 720 x 480 pixels / P AL: 720 x 576 p ixels Video In Composite Video In (BNC) x 4 Video Out Composite Video Out (BNC) x 4, Monitor Out (BNC) x 1 Audio In/Out Line In / Out (RCAx2) S t orage Media > 600 GB / 1 Fixed HDD, 1 Removable HDD > 300 GB / 1 F ...
-
Approach Tech DVR-3024 - page 68
66 6.7 ScanIP Follow the instructions below to use the ScanIP sof tware to search the DVR devices in a local network. 1. Click the button to discover the connection of the all-type device in the LAN. The Device List will display the connection of the all-type device. 2. Select the desired device of the DVR from the Device List . 3. Click the desire ...
-
Approach Tech DVR-3024 - page 69
67 6. Auto search “Free IP Address”. If you clicked “Y es” the “Free IP Address” box will appear on the right. 1. Select and double click any of the addresses in the “Free IP Address” box on the right to enter it into an IP Address on the left. 2. T o change an y IP address, type in the new address in the “F ree IP Address” box ...
-
Approach Tech DVR-3024 - page 70
68 APPENDIX 1. – Using CD Discs (FOR CD-R W MODEL ONL Y) Please note that when us ing CD-ROM, CD-R or CD-RW discs, do not write or stick anything on the surface as this could cause an error in recording or the data on the disc may be damaged. Inserting Disc 1. Please press the eject button. 2. Please place the disc in the tray. NOTE: When using a ...
-
Approach Tech DVR-3024 - page 71
69 3. Press the front of the tray or lightly and gently pull the tray out with two fingers. Caution When you use either a CD-RW or a CD-ROM, please pay heed to the following. 1. At the time of installation: As suggested in your specifications, please do not install in an unstable position or in one that cause s vibrations. 2. Do not install in high ...
Do you have a question concerning Approach Tech DVR-3024?
Use the form below
If you did not solve your problem by using a manual Approach Tech DVR-3024, ask a question using the form below. If a user had a similar problem with Approach Tech DVR-3024 it is likely that he will want to share the way to solve it.