English dropdown-ico

Manual Vulcan-Hart VGF-18

12 pages 0.69 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart VGF-18 - page 1

    VGF-18 HEAVY DUTY GAS FRYERS MODEL VGF-18 ML-136401 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC WWW.VULCANHART.COM P.O. BOX 696, LOUISVILLE, KY 40201-0696 TEL. (502) 778-2791 INSTALLATION & OPERATION MANUAL For additional information on Vulcan-Hart or to locate an authorized parts and service provider in your area, visit our website a ...

  • Vulcan-Hart VGF-18 - page 2

    — 2 — IMPORTANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBT ...

  • Vulcan-Hart VGF-18 - page 3

    — 3 — INST ALLA TION, OPERA TION AND CARE OF MODELS V GF-18 HEA VY DUTY GAS FR YERS PLEASE KEEP THIS MANU AL FOR FUTURE USE GENERAL Your Vulcan-Hart Gas Fryer is produced with quality workmanship and material. Proper installation, usage and maintenance will result in many years of satisfactory performance. It is suggested that you thoroughly re ...

  • Vulcan-Hart VGF-18 - page 4

    — 4 — LOCATION CAUTION: The equipment area must be kept free and clear of combustible substances. Installation clearances: COMBUSTIBLE NONCOMBUSTIBLE CONSTRUCTION CONSTRUCTION Back: 6" (152) 0" Right Side: 6" (152) 0" Left Side: 6" (152) 0" The installation location must allow adequate clearances for servicing and ...

  • Vulcan-Hart VGF-18 - page 5

    — 5 — Fig. 1 Fryers Mounted on Optional Casters Fryers mounted on casters must use a flexible connector (NOT SUPPLIED BY VULCAN) that complies with the Standard for Connectors of Movable Gas Appliances, ANSI-Z21.69 • CSA6.16 and a quick-disconnect device that complies with the Standard for Quick-Disconnect Devices for Use With Gas Fuel, ANSI- ...

  • Vulcan-Hart VGF-18 - page 6

    — 6 — GAS CONNECTIONS CAUTION: All gas supply connections and any pipe joint compound used must be resistant to the action of propane gases. WARNING: PRIOR TO LIGHTING, CHECK ALL JOINTS IN THE GAS SUPPLY LINE FOR LEAKS. USE SOAP AND WATER SOLUTION. DO NOT USE AN OPEN FLAME. Rear Gas Connection for Stand Alone Installations The gas inlet is loca ...

  • Vulcan-Hart VGF-18 - page 7

    — 7 — TESTING THE GAS SUPPLY SYSTEM When test pressures exceed 1 / 2 psig (3.45 kPa), the fryer and its individual shutoff valve must be disconnected from the gas supply piping system. When test pressures are 1 / 2 psig (3.45 kPa) or less, the fryer must be isolated from the gas supply system by closing its individual manual shutoff valve. FLUE ...

  • Vulcan-Hart VGF-18 - page 8

    — 8 — LIGHTING THE PILOT 1. Turn thermostat OFF. Thermostat is located behind the door (Fig. 3). 2. Turn gas control valve knob to OFF/PILOT (Fig. 4). Wait 5 minutes for unburned gas to vent. 3. Push gas control knob in (Fig. 4). 4. While still holding knob in, light the pilot with a lit taper. Continue to depress knob for 30 seconds, then rele ...

  • Vulcan-Hart VGF-18 - page 9

    — 9 — TURNING THE FRYER ON To turn the fryer on, set the thermostat knob to the desired temperature. After the set temperature has been reached, the gas control shuts off gas flow to the burners. The pilot remains lit. The burners will cycle on and off, maintaining the set temperature. TURNING THE FRYER OFF 1. Turn the thermostat OFF. 2. Turn t ...

  • Vulcan-Hart VGF-18 - page 10

    — 10 — SHORTENING LIFE Shortening life may be extended by following these guidelines: • Do not salt foods over the fryer. • Use good quality shortening. • Filter shortening at least daily. • Replace shortening if it becomes poorly flavored. • Keep equipment and surroundings clean. • Set thermostats correctly. • Remove excess moist ...

  • Vulcan-Hart VGF-18 - page 11

    — 11 — CLEANING Daily Clean your fryer regularly. Keeping the fryer clean and free of accumulated grease will prevent stubborn stains from forming. Wash all exterior surfaces at least once daily. Use a cloth with warm water and a mild soap or detergent. Follow with a clear rinse, then dry. If regular cleaning is neglected, grease will be burned ...

  • Vulcan-Hart VGF-18 - page 12

    — 12 — FORM 35638 (05-05) PRINTED IN U.S.A. MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT OIL CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL OIL FROM THE TANK. FLUE Annually check the flue when it is cool to be sure it is free of obstructi ...

Manufacturer Vulcan-Hart Category Fryer

Documents that we receive from a manufacturer of a Vulcan-Hart VGF-18 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- VGF-18 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart VGF-18
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart VGF-18.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart VGF-18, service manual, brief instructions and user manuals Vulcan-Hart VGF-18. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart VGF-18.

Similar manuals

A complete manual for the device Vulcan-Hart VGF-18, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart VGF-18 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart VGF-18.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart VGF-18 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart VGF-18, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart VGF-18, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart VGF-18 - which should help us in our first steps of using Vulcan-Hart VGF-18
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart VGF-18
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart VGF-18 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart VGF-18?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart VGF-18, ask a question using the form below. If a user had a similar problem with Vulcan-Hart VGF-18 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)