-
Hanns.G HG216 - page 1
HG216 USER’S MANUAL 22 inch Wide Screen TFT LCD Monitor ...
-
Hanns.G HG216 - page 2
User’s Manual Before operating the monitor, please read th is manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference S t atement This equipment has been tested and found to comp ly with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designe ...
-
Hanns.G HG216 - page 3
User’s Manual Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirement s in the world. This makes for a high performance product, designed with the user in focus that also mini ...
-
Hanns.G HG216 - page 4
User’s Manual Recycling Information We, the Hanns.G care very much about our environmen t protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devi ces at the end-of-life. These devices contain recyclable materials, which can be re-dec omposed and re-integrat ...
-
Hanns.G HG216 - page 5
User’s Manual T ABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 6 PRECAUTIONS ......................................................................................... 6 SPECIAL NOTES ON LCD MONIT ORS ................................................... 7 BEFORE YOU OPERA T ...
-
Hanns.G HG216 - page 6
User’s Manual SAFETY NOTICE 1. The changes or modifications not expr essly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord , if any , must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for an ...
-
Hanns.G HG216 - page 7
User’s Manual SPECIAL NOTES ON LCD MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn off the Power Switch and then turn it on agai n to make sure the flicker disappears. • Y ou may find slightly uneven brigh ...
-
Hanns.G HG216 - page 8
User’s Manual BEFORE YOU OPERA TE THE MONIT OR FEA TURES • 22” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1680X 1050@60Hz • EP A ENERGY ST AR ® • Ergonomic Design • S pace Saving, Comp act Case Design CHECKING THE CONTEN TS OF THE P ACKAGE The product p ackage should include the ...
-
Hanns.G HG216 - page 9
User’s Manual INST ALLA TION INSTRUCTIONS Inst all Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer secti on of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify that t ...
-
Hanns.G HG216 - page 10
User’s Manual MAKING CONNECTIONS CONNECTING TO A PC T urn of f your computer before performing the procedure below . 1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer ’s D-Sub port. 2. Connect one end of the HDMI cable (Dual input mode optional) to the back of the monitor and connect the ...
-
Hanns.G HG216 - page 11
User’s Manual ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of t he monitor , then adjust the monitor ’s angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor ’s angle. • Y ou are able to adjust t he monitor ’s angle from -5 ° to 20 ? ...
-
Hanns.G HG216 - page 12
User’s Manual OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other contro l buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the Sign ...
-
Hanns.G HG216 - page 13
User’s Manual FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor ’s power . • Power Indicator: Blue — Power On mode. Orange — Power Saving mode. • MENU / ENTER: 1. Activate the OSD menu or adjust t he function settings and confirmation or 2. Exit OSD menu when in volume OSD status. • Adjust < >: ...
-
Hanns.G HG216 - page 14
User’s Manual HOW TO ADJUST A SETTING M M a a i i n n M M e e n n u u FUNCTION DESCRIPTION Brightness Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option by pressing the 「 Menu 」 button again, and adjust the level. Contrast Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option by pressing ...
-
Hanns.G HG216 - page 15
User’s Manual Clock Adjustment Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase Adjustment Select the 「 Phase Adjustment 」 option to reduce the horizont al flicker of characters on the screen. Enter the option and adjust the level. Exit Exit the ...
-
Hanns.G HG216 - page 16
User’s Manual OSD Color Select the 「 OSD Color 」 setting option to adjust t he color of the OSD. Enter the option and adjust the level. Language Select the 「 Language 」 option to change the language of the OSD. Enter the option and select a language. (Reference only , the OSD Langua ge is depended on selected model) Exit Exit the OSD menu ...
-
Hanns.G HG216 - page 17
User’s Manual PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B cap abilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of it s identity and, depending on the level of DDC used, communicate additional information about its display cap abilities. The DDC2B is a bidirect ...
-
Hanns.G HG216 - page 18
User’s Manual TECHNICAL SUPPORT (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V ideo Card is Plug & Play compatible *Check ...
-
Hanns.G HG216 - page 19
User’s Manual ERROR MESSAGE & PO SSIBLE SOLUTIONS CABLE NOT CONNECTED : 1. Check that the signal-cable is properly con nected, If the connector is loose, tighten the connector ’s screws. 2. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable di splay mode, set the compu ...
-
Hanns.G HG216 - page 20
User’s Manual 27 1440x900@75Hz 70.635 74.984 28 1600x1200@60Hz 75 60 29 1680x1050@60Hz 65.29 59.954 30 720x480i@60Hz 15.734 59.94 31 720x480p@60Hz 31.469 59.94 32 720x576i@50Hz 15.625 50 33 720x576p@50Hz 31.25 50 34 1280x720p@50Hz 37.5 50 35 1280x720p@60Hz 45 60 36 1920x1080i@60Hz 33.75 60 37 1920x1080i@50Hz 28.125 50 20 ...
-
Hanns.G HG216 - page 21
User’s Manual APPENDIX SPEC IFICA TIONS Driving system TFT Color LCD Size 22” (21.6" V iewable) LCD Panel Pixel pitch 0.276mm(H) x 0.276mm(V) H-Frequency 30KHz – 80KHz V ideo V -Frequency 50 – 75Hz Display Colors 16.7M Colors Max. Resolution 1680 x 1050 @75Hz Plug & Play VESA DDC2B TM ON Mode ≤ 50W EP A ENERGY ST AR ® OFF Mode ? ...
Do you have a question concerning Hanns.G HG216?
Use the form below
If you did not solve your problem by using a manual Hanns.G HG216, ask a question using the form below. If a user had a similar problem with Hanns.G HG216 it is likely that he will want to share the way to solve it.