English dropdown-ico

Manual Supermicro SUPERO H8QGI+-F

78 pages 0.57 mb
Download

Go to site of 78

Summary
  • Supermicro SUPERO H8QGI+-F - page 1

    H8QG6+-F H8QGi+-F USER’S MANUAL Revision 1.1c ® S UPER ...

  • Supermicro SUPERO H8QGI+-F - page 2

    The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: F ...

  • Supermicro SUPERO H8QGI+-F - page 3

    Preface iii Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the H8QG6/i+-F serverboards. The H8QG6+-F serverboard includes onbard SAS2 support while the H8QGi+-F does not. The H8QG6/i+-F serverboard is based on the AMD® SR569 ...

  • Supermicro SUPERO H8QGI+-F - page 4

    iv H8QG6/i+-F Serverboard User ’ s Manual Notes ...

  • Supermicro SUPERO H8QGI+-F - page 5

    v T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 Checklist .......................................................................................................... 1-1 1-2 Contacting Supermicro .................................... ...

  • Supermicro SUPERO H8QGI+-F - page 6

    vi JIBTN1 Header (only on H8QG6+-F) ...................................................... 2-12 Fan Headers ............................................................................................. 2-13 Serial Ports ............................................................................................... 2-13 SGPIO ....................... ...

  • Supermicro SUPERO H8QGI+-F - page 7

    T able of Contents vii 2-12 Installing Drivers ............................................................................................ 2-25 Supero Doctor III ........................................................................................... 2-26 Chapter 3 Troubleshooting 3-1 T roubleshooting Procedures ................................ ...

  • Supermicro SUPERO H8QGI+-F - page 8

    Notes viii H8QG6/i+-F Serverboard User ’ s Manual ...

  • Supermicro SUPERO H8QGI+-F - page 9

    Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following items ...

  • Supermicro SUPERO H8QGI+-F - page 10

    1-2 H8QG6/i+-F Serverboard User ’ s Manual 1-2 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.com Europe Address ...

  • Supermicro SUPERO H8QGI+-F - page 11

    Chapter 1: Introduction 1-3 Figure 1-1. H8QG6+-F Image ...

  • Supermicro SUPERO H8QGI+-F - page 12

    1-4 H8QG6/i+-F Serverboard User ’ s Manual Notes: Jumpers not indicated are for test purposes only . Not all ports, jumpers or LED Indicators are available on all serverboards. Figure 1-2. H8QG6/i+-F Motherboard Layout (not drawn to scale) JIBTN1 FA N6 FA N5 FA N9 FA N 8 FA N7 FA N1 FA N2 FA N3 FA N4 JD1 JF1 JOH1 JL1 JI2C2 JI2C1 LE1 JWF1 DP3 DP1 ...

  • Supermicro SUPERO H8QGI+-F - page 13

    Chapter 1: Introduction 1-5 H8QG6/i+-F Quick Reference Jumper Description Default Setting JBT1 CMOS Clear (See Section 2-7) JI 2 C1/JI 2 C2 I 2 C to PCI-E Slot Enable/Disable Both Closed (Enabled) JPB1 BMC Enable/Disable Pins 1-2 (Enabled) JPG1 VGA Enable/Disable Pins 1-2 (Enabled) JPL1 LAN 1/2 Enable/Disable Pins 1-2 (Enabled) JPS1 SAS Controller ...

  • Supermicro SUPERO H8QGI+-F - page 14

    1-6 H8QG6/i+-F Serverboard User ’ s Manual Connector Description COM1/COM2 COM1 Serial Port/Header F AN 1-9 Chassis/CPU Fan Headers IPMI LAN Dedicated IPMI LAN Port JD1 Speaker Header JF1 Front Panel Connector JIBTN1 RAIDKey for RAID 5 SAS support (only on H8QG6+-F) JL1 Chassis Intrusion Header JOH1 Overheat W arning Header JPI2C1 Power I 2 C Hea ...

  • Supermicro SUPERO H8QGI+-F - page 15

    Chapter 1: Introduction 1-7 Motherboard Features CPU • Quad AMD Opteron 6000 series (AMD Socket G34 type) processors Note: Y ou must install at least two processors for full functions to be supported. Memory • Thirty-T wo (32) single/dual/tri/quad channel DIMM slots supporting up to 128 GB of ECC/Non-ECC UDIMM or up to 512 GB of ECC RDIMM DDR3- ...

  • Supermicro SUPERO H8QGI+-F - page 16

    1-8 H8QG6/i+-F Serverboard User ’ s Manual ACPI Features • Microsoft OnNow • Slow blinking LED for suspend state indicator • BIOS support for USB keyboard • W ake-On-LAN (WOL) • Internal/external modem ring-on • Hardware BIOS V irus protection Onboard I/O • Six (6) SA T A ports supported by an on-chip SA T A controller (RAID 0, 1, 1 ...

  • Supermicro SUPERO H8QGI+-F - page 17

    Chapter 1: Introduction 1-9 G34-SOCKET #3 8x DIMM 8x DIMM FWH Keyboard/ Mouse LPC SIO W83527DHG-P G34-SOCKET #2 VRM G34-SOCKET #4 AMD SR5690 PCIE (X16) H/W_MONITOR W83795 LPC BUS 9_FAN_CONN. VRM 6x PORTS SATA_CONN SATA HT Link HT Link VRM VRM HT Link 16x16-5.2GT/S HT Link HT Link 8x DIMM USB USB PORT (0-6) SLOT#4 PCIE_(X16) LSI SAS2 2008 PCIE (X4) ...

  • Supermicro SUPERO H8QGI+-F - page 18

    1-10 H8QG6/i+-F Serverboard User ’ s Manual 1-3 Chipset Overview The H8QG6/i+-F serverboard is based on the AMD SR5690/SP5100 chipset. This chipset functions as a Media and Communications Processor (MCP). Controllers for the system memory are integrated directly into AMD Opteron processors. AMD SR5690/SP5100 Chipsets The AMD SR5690/SP5100 are eac ...

  • Supermicro SUPERO H8QGI+-F - page 19

    Chapter 1: Introduction 1-1 1 CPU Overheat/Fan Fail LED and Control This feature is available when the user enables the CPU overheat/Fan Fail warning function in the BIOS. This allows the user to de fi ne an overheat temperature. When this temperature is exceeded or when a fan failure occurs, the Overheat/Fan Fail warning LED is triggered. Auto-Sw ...

  • Supermicro SUPERO H8QGI+-F - page 20

    1-12 H8QG6/i+-F Serverboard User ’ s Manual W ake-On-LAN (WOL) W ake-On-LAN is de fi ned as the ability of a management application to remotely power up a computer that is powered off. Remote PC setup, up-dates and access tracking can occur after hours and on weekends so that daily LAN traf fi c is kept to a minimum and users are not interrupte ...

  • Supermicro SUPERO H8QGI+-F - page 21

    Chapter 1: Introduction 1-13 The IRQs, DMAs and I/O space resources of the Super I/O can be fl exibly adjusted to meet ISA PnP requirements, which support ACPI and APM (Advanced Power Management). ...

  • Supermicro SUPERO H8QGI+-F - page 22

    1-14 H8QG6/i+-F Serverboard User ’ s Manual Notes ...

  • Supermicro SUPERO H8QGI+-F - page 23

    Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o prevent damage to your system board, it is important to handle it very carefully . The following measures are generally suf fi cient to protect your equipment from ESD. Precautions • Use a grounded ...

  • Supermicro SUPERO H8QGI+-F - page 24

    H8QG6/i+-F Serverboard User's Manual 2-2 ! 2-2 Processor and Heatsink Installation Exercise extreme caution when handling and installing the processor . Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Installation Procedure Follow the procedures as listed below to install the ...

  • Supermicro SUPERO H8QGI+-F - page 25

    Chapter 2: Installation 2-3 Installing the Heatsinks We recommend the use of active type heatsinks (except for 1U systems). Use any onboard fan header for the CPU's heatsink fan. T o install the heatsink, please follow the installation instructions that are included with your heatsink package. T riangle 3. Use your thumb and your index fi nge ...

  • Supermicro SUPERO H8QGI+-F - page 26

    H8QG6/i+-F Serverboard User's Manual 2-4 2-3 Mounting the Motherboard into a Chassis All motherboards have standard mounting holes to fi t different types of chassis. Make sure that the locations of all the mounting holes for both the motherboard and the chassis match. Although a chassis may have both plastic and metal mounting fasteners, met ...

  • Supermicro SUPERO H8QGI+-F - page 27

    Chapter 2: Installation 2-5 3. Gently press down on the memory module until it snaps into place. 4. With four DIMMs installed, repeat step 2 to populate the CPU2 DIMM slots. Always install four DIMMs to both CPU DIMM slots for more ef fi cient operation. Note: Memory modules of 1 GB, 2 GB, 4 GB, 8 GB or 16 GB size are supported. It is highly recom ...

  • Supermicro SUPERO H8QGI+-F - page 28

    H8QG6/i+-F Serverboard User's Manual 2-6 Memory Population for Optimal Performance -For a Motherboard with One CPU (CPU1) Installed # DIMMS CPU Channel 1 Channel 2 Channel 3 Channel 4 4 DIMMs CPU1 P1-1A P1-2A P1-3A P1-4A 8 DIMMs CPU1 P1-1A P1-1B P1-2A P1-2B P1-3A P1-3B P1-4A P1-4B Memory Population for Optimal Performance -For a Motherboard wi ...

  • Supermicro SUPERO H8QGI+-F - page 29

    Chapter 2: Installation 2-7 Note 2 : Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. Possible System Memory Allocation & Availability System Device Size Physical Memory A vailable (4 GB T ...

  • Supermicro SUPERO H8QGI+-F - page 30

    H8QG6/i+-F Serverboard User's Manual 2-8 2-5 PCI Expansion Cards A riser card is used to support one standard size (full height full length) PCI expansion card. Installing a PCI Expansion Card 1. Con fi rm that you have the correct riser card for your chassis model and the add-on card includes a standard bracket. 2. Remove the chassis cover . ...

  • Supermicro SUPERO H8QGI+-F - page 31

    Chapter 2: Installation 2-9 1 2 5 4 3 6 7 8 9 2-6 I/O Port and Control Panel Connections The I/O ports are color coded in conformance with the PC99 speci fi cation to make setting up your system easier . See Figure 2-2 below for the colors and locations of the various I/O ports. Figure 2-2. I/O Port Locations and De fi nitions Front Control Panel ...

  • Supermicro SUPERO H8QGI+-F - page 32

    H8QG6/i+-F Serverboard User's Manual 2-10 2-7 Connector De fi nitions Power Connectors A 24-pin main power supply connector(JPW1) and three 8-pin CPU PWR connectors (JPW2/JPW3) on the motherboard. These power connectors meet the SSI EPS 12V speci fi cation. In addition to the 24-pin A TX power connector , the 12V 8-pin CPU PWR connectors at ...

  • Supermicro SUPERO H8QGI+-F - page 33

    Chapter 2: Installation 2-1 1 Power LED Connector The Power LED connector is on pins 15 and 16 of JF1. See the table on the right for pin de fi nitions. Power LED Pin De fi nitions (JF1) Pin# De fi nition 15 PW_ON 16 Ground HDD/FP UID Switch The HDD/UID Switch connections are located on pins 13/14 of JF1. Attach a hard-drive LED cable to display ...

  • Supermicro SUPERO H8QGI+-F - page 34

    H8QG6/i+-F Serverboard User's Manual 2-12 Universal Serial Bus Ports T wo Universal Serial Bus ports (USB 2.0) are located beside the Keyboard and Mouse PS2 ports. One additional T ype A port (USB6) is also included on the motherboard. See the table on the right for pin de fi nitions. Universal Serial Bus Ports Pin De fi nitions (USB0/1, USB ...

  • Supermicro SUPERO H8QGI+-F - page 35

    Chapter 2: Installation 2-13 Fan Header Pin De fi nitions Pin# De fi nition 1 Ground 2 +12V 3 T achometer 4 PWR Modulation Fan Headers This motherboard has nine fan headers (Fan1 to Fan9). These 4-pin fans headers are backward compatible with 3-pin fans. However , fan speed control is available for 4-pin fans only . The fan speeds are controlled ...

  • Supermicro SUPERO H8QGI+-F - page 36

    H8QG6/i+-F Serverboard User's Manual 2-14 SMBus Header The header at SMBus is for the System Management Bus. Connect the appropriate cable here to utilize SMB on the system. See the table on the right for pin de fi nitions. SMBus Header (SMBus) Pin De fi nitions (JSMB1) Pin# De fi nition 1 Data 2 Ground 3 Clock 4 No Connection Power I2C The ...

  • Supermicro SUPERO H8QGI+-F - page 37

    Chapter 2: Installation 2-15 Power LED/Speaker On the JD1 header , pins 1~3 are used for power LED indication, and pins 4-7 are for the speaker . See the tables on the right for pin de fi nitions. If you wish to use the onboard speaker , you should close pins 6~7 with a jumper . Connect a cable to pins 4~7 of JD1 to use an external speaker . Speak ...

  • Supermicro SUPERO H8QGI+-F - page 38

    H8QG6/i+-F Serverboard User's Manual 2-16 T rusted Platform Module Header This header is used to connect a T rusted Platform Module (TPM), available separately from a third-party vendor . A TPM is a security device that allows encryption and authentica- tion of hard drives, disallowing access if the TPM associated with it is not installed in t ...

  • Supermicro SUPERO H8QGI+-F - page 39

    Chapter 2: Installation 2-17 2-8 Jumper Settings Explanation of Jumpers T o modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector . Pin 1 is identi fi ed with a square solder pad on the printed circuit board. See the diagram a ...

  • Supermicro SUPERO H8QGI+-F - page 40

    H8QG6/i+-F Serverboard User's Manual 2-18 I2C to PCI-Express Slot JI 2 C1/JI 2 C2 allows you to enable the I 2 C bus to communicate with the PCI-Express slot. For the jumpers to work properly , please set both jumpers to the same setting. If enabled, both jumpers must be enabled. If disabled, both jumpers must be disabled. See the table on the ...

  • Supermicro SUPERO H8QGI+-F - page 41

    Chapter 2: Installation 2-19 Backpanel USB W ake-Up Enable (JPUSB1) Jumper Settings Jumper Setting De fi nition Pins 1-2 Enabled (default) Pins 2-3 Disabled USB W ake-Up JPUSB1 jumper allows you to "wake up" the system by pressing a key on the USB keyboard or by clicking the USB mouse of your system. These jumpers are used in conjunction ...

  • Supermicro SUPERO H8QGI+-F - page 42

    H8QG6/i+-F Serverboard User's Manual 2-20 2-9 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gb LAN port, one LED blinks to indicate activity while the other may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with ...

  • Supermicro SUPERO H8QGI+-F - page 43

    Chapter 2: Installation 2-21 2-10 SAS and SA T A Drive Connections SA T A Ports There are no jumpers to con fi gure the SA T A ports, which are designated SA T A0 through SA T A5. See the table on the right for pin de fi nitions. SA T A Ports Pin De fi nitions (SA T A0-SA T A5) Pin # De fi nition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Grou ...

  • Supermicro SUPERO H8QGI+-F - page 44

    H8QG6/i+-F Serverboard User's Manual 2-22 2-1 1 Enabling SA T A RAID Now that the hardware is set up, you must install the operating system and the SA T A RAID drivers, if you wish to use RAID with your SA T A drives. The installation procedure differs depending on whether you wish to have the operating system installed on a RAID array or on a ...

  • Supermicro SUPERO H8QGI+-F - page 45

    Chapter 2: Installation 2-23 Figure 2-4. BIOS Setup Screen Note: Y ou need to have an external USB fl oppy when building the driver diskette. Window's Vista, Windows 2008 or later Windows OS systems can use a USB stick instead of a fl oppy . Enabling SA T A RAID in the BIOS Before installing the Windows Operating System, you must change some ...

  • Supermicro SUPERO H8QGI+-F - page 46

    H8QG6/i+-F Serverboard User's Manual 2-24 4. After exiting the BIOS Setup Utility , the system will reboot. When prompted during the startup, press the <CTRL+A> key when prompted to run the Dot- Hill RAID Utility program (see Figure 2-5). Using the Adaptec RAID Utility The Adaptec® RAID Utility program is where you can de fi ne the dri ...

  • Supermicro SUPERO H8QGI+-F - page 47

    Chapter 2: Installation 2-25 Figure 2-6. Driver/T ool Installation Display Screen 2-12 Installing Drivers The CD that came bundled with the system contains drivers, some of which must be installed, such as the chipset driver . After inserting this CD into your CD-ROM drive, the display shown in Figure 2-6 should appear . (If this display does not a ...

  • Supermicro SUPERO H8QGI+-F - page 48

    H8QG6/i+-F Serverboard User's Manual 2-26 Supero Doctor III The SuperDoctor® III program is a Web base management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called SD III Client. The SuperDoctor III program included on the CD-ROM that came with your motherboard allo ...

  • Supermicro SUPERO H8QGI+-F - page 49

    Chapter 2: Installation 2-27 Note: The SuperDoctor III program and User ’s Manual can be downloaded from the Supermicro web site at http://www .supermicro.com/products/accessories/software/ SuperDoctorIII.cfm.For Linux, we recommend that you use the SuperoDoctor II application instead. Figure 2-8. Supero Doctor III Interface Display Screen (Remot ...

  • Supermicro SUPERO H8QGI+-F - page 50

    H8QG6/i+-F Serverboard User's Manual 2-28 Notes ...

  • Supermicro SUPERO H8QGI+-F - page 51

    3-1 Chapter 3: T roubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘T echnical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter . ...

  • Supermicro SUPERO H8QGI+-F - page 52

    3-2 H8QG6/i+-F Serverboard User's Manual 4. T urn the power switch on and off to test the system. 5. The battery on your motherboard may be old. Check to verify that it still supplies ~3VDC. If it does not, replace it with a new one. No Video 1. If the power is on but you have no video, remove all the add-on cards and cables. 2. Use the speake ...

  • Supermicro SUPERO H8QGI+-F - page 53

    3-3 Chapter 3: T roubleshooting 3-2 T echnical Support Procedures Before contacting T echnical Support, please take the following steps. Also, note that as a motherboard manufacturer , we do not sell directly to end-users, so it is best to fi rst check with your distributor or reseller for troubleshooting services. They should know of any possible ...

  • Supermicro SUPERO H8QGI+-F - page 54

    3-4 H8QG6/i+-F Serverboard User's Manual Select your motherboard model on the web page and download the corresponding BIOS fi le to your computer . Unzip the BIOS update fi le, in which you will fi nd the readme.txt ( fl ash instructions), the afudos.exe (BIOS fl ash utility) and the BIOS image (xxx.rom) fi les. Copy these fi les to a b ...

  • Supermicro SUPERO H8QGI+-F - page 55

    Chapter 4: BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMIBIOS™ Setup utility for the H8QG6/i+-F serverboard. The AMI ROM BIOS is stored in a fl ash chip and can be easily upgraded using a fl oppy disk-based program. Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet ...

  • Supermicro SUPERO H8QGI+-F - page 56

    4-2 H8QG6/i+-F Serverboard User ’ s Manual 4-2 Main Menu When you fi rst enter AMI BIOS Setup Utility , you will see the Main Menu screen. Y ou can always return to the Main Menu by selecting the Main tab on the top of the screen with the arrow keys. The Main Menu screen provides you with a system overview , which includes the version, built dat ...

  • Supermicro SUPERO H8QGI+-F - page 57

    Chapter 4: BIOS 4-3 Hit 'DEL' Message Display Use this option to Enable or Disable the "Press DEL to run setup" message in POST . Interrupt 19 Capture Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and Disabled. Restore on AC Power Loss This sets the action that occurs when an AC power loss occurs. Op ...

  • Supermicro SUPERO H8QGI+-F - page 58

    4-4 H8QG6/i+-F Serverboard User ’ s Manual CPU DownCore Mode This option sets the CPU DownCore Mode for your system. If you change this option then a cold reset is required. Options include Auto Mode , Maximum Core Level, No Leveling, 2 Cores, 4 Cores, 6 Cores, 8 Cores, 10 Cores and 12 Cores. C1E Support This option enables or disables C1E Suppor ...

  • Supermicro SUPERO H8QGI+-F - page 59

    Chapter 4: BIOS 4-5  ECC Con fi guration ECC Mode This submenu sets the level of ECC protection. Options include Disabled, Basic , Good, Super , Max and User . Selecting User activates the other op- tion for user setting. Note: The "Super" ECC mode dynamically sets the DRAM scrub rate so all of memory is scrubbed in 8-hours. DRAM E ...

  • Supermicro SUPERO H8QGI+-F - page 60

    4-6 H8QG6/i+-F Serverboard User ’ s Manual Legacy USB Support Select "Enabled" to enable the support for USB Legacy . Disable Legacy support if there are no USB devices installed in the system. "Auto" disabled Legacy support if no USB devices are connected. The options are Disabled, Enabled and Auto.   IDE/SA T A Con fi ...

  • Supermicro SUPERO H8QGI+-F - page 61

    Chapter 4: BIOS 4-7 Use this value if the IDE disk drive support cannot be determined. Select 0 to allow BIOS to use PIO mode 0, which has a data transfer rate of 3.3 MBs. Select 1 to allow BIOS to use PIO mode 1, which has a data transfer rate of 5.2 MBs. Select 2 to allow BIOS to use PIO mode 2, which has a data transfer rate of 8.3 MBs. Select 3 ...

  • Supermicro SUPERO H8QGI+-F - page 62

    4-8 H8QG6/i+-F Serverboard User ’ s Manual  PCI/PNP Con fi guration Clear NVRAM Select Y es to clear NVRAM during boot-up. The options are Y es and No . Plug & Play O/S Select Y es to allow the OS to con fi gure Plug & Play devices. (This is not required for system boot if your system has an OS that supports Plug & Play .) Select ...

  • Supermicro SUPERO H8QGI+-F - page 63

    Chapter 4: BIOS 4-9 Serial 2 Address This option speci fi es the base I/O port address and Interrupt Request address of serial port 2. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable. Select "2F8/IRQ3&quo ...

  • Supermicro SUPERO H8QGI+-F - page 64

    4-10 H8QG6/i+-F Serverboard User ’ s Manual Sredir Memory Display Delay Use this setting to set the delay in seconds to display memory information. Options are No Delay , 1 sec, 2 secs and 4 secs.   Hardware Health Con fi guration CPU Overheat T emperature This setting allows you to specify the type of alarm for CPU overheating. Options in ...

  • Supermicro SUPERO H8QGI+-F - page 65

    Chapter 4: BIOS 4-1 1 ACPI V ersion Features Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. ACPI APIC Support Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and Disabled. Headless Mode Use this setting to enable or disab ...

  • Supermicro SUPERO H8QGI+-F - page 66

    4-12 H8QG6/i+-F Serverboard User ’ s Manual   MAC Address In the fi eld provided here enter the MAC address in the hex form of xx.xx. xx.xx.xx.xx with xx in hex form only . The current MAC address in the BMC is shown.   Subnet Mask In the fi eld provided here enter the Subnet address in the decimal form of xxx.xxx.xxx.xxx with xxx h ...

  • Supermicro SUPERO H8QGI+-F - page 67

    Chapter 4: BIOS 4-13 4-6 Security Settings Menu AMI BIOS provides a Supervisor and a User password. If you use both passwords, the Supervisor password must be set fi rst. Change Supervisor Password Select this option and press <Enter> to access the sub menu, and then type in the password. Change User Password Select this option and press < ...

  • Supermicro SUPERO H8QGI+-F - page 68

    4-14 H8QG6/i+-F Serverboard User ’ s Manual   CD/DVD Drives This feature allows you to specify the boot sequence from the list of available CD/ DVD drives. A device that is in parenthesis has been disabled in the corresponding type menu.   USB Drives This feature allows you to specify the boot sequence from the list of available USB d ...

  • Supermicro SUPERO H8QGI+-F - page 69

    Chapter 4: BIOS 4-15 Load Optimal Defaults T o set this feature, select Load Optimal Defaults from the Exit menu and press <Enter>. Then Select "OK" to allow BIOS to automatically load the Optimal Defaults as the BIOS Settings. The Optimal settings are designed for maximum system performance, but may not work best for all computer a ...

  • Supermicro SUPERO H8QGI+-F - page 70

    4-16 H8QG6/i+-F Serverboard User ’ s Manual Notes ...

  • Supermicro SUPERO H8QGI+-F - page 71

    Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal errors are those which will not allow t ...

  • Supermicro SUPERO H8QGI+-F - page 72

    A-2 H8QG6/i+-F Serverboard User ’ s Manual Notes ...

  • Supermicro SUPERO H8QGI+-F - page 73

    B-1 Appendix B: BIOS POST Checkpoint Codes Appendix B BIOS POST Checkpoint Codes When AMIBIOS performs the Power On Self T est, it writes checkpoint codes to I/O port 0080h. If the computer cannot complete the boot process, diagnostic equipment can be attached to the computer to read I/O port 0080h. B-1 Uncompressed Initialization Codes The uncompr ...

  • Supermicro SUPERO H8QGI+-F - page 74

    B-2 H8QG6/i+-F Serverboard User ’ s Manual B-2 Bootblock Recovery Codes The bootblock recovery checkpoint codes are listed in order of execution: Checkpoint Code Description E0h The onboard fl oppy controller if available is initialized. Next, beginning the base 512 KB memory test. E1h Initializing the interrupt vector table next. E2h Initializi ...

  • Supermicro SUPERO H8QGI+-F - page 75

    B-3 Appendix B: BIOS POST Checkpoint Codes B-3 Uncompressed Initialization Codes The following runtime checkpoint codes are listed in order of execution. These codes are uncompressed in F0000h shadow RAM. Checkpoint Code Description 03h The NMI is disabled. Next, checking for a soft reset or a power on condition. 05h The BIOS stack has been built. ...

  • Supermicro SUPERO H8QGI+-F - page 76

    B-4 H8QG6/i+-F Serverboard User ’ s Manual Checkpoint Code Description 2Eh Completed post-video ROM test processing. If the EGA/VGA controller is not found, performing the display memory read/write test next. 2Fh The EGA/VGA controller was not found. The display memory read/write test is about to begin. 30h The display memory read/write test pass ...

  • Supermicro SUPERO H8QGI+-F - page 77

    B-5 Appendix B: BIOS POST Checkpoint Codes Checkpoint Code Description 54h Shutdown was successful. The CPU is in real mode. Disabling the Gate A20 line, parity , and the NMI next. 57h The A20 address line, parity , and the NMI are disabled. Adjusting the memory size depending on relocation and shadowing next. 58h The memory size was adjusted for r ...

  • Supermicro SUPERO H8QGI+-F - page 78

    B-6 H8QG6/i+-F Serverboard User ’ s Manual Checkpoint Code Description 99h Any initialization required after the option ROM test has completed. Con fi guring the timer data area and printer base address next. 9Ah Set the timer and printer base addresses. Setting the RS-232 base address next. 9Bh Returned after setting the RS-232 base address. Pe ...

Manufacturer Supermicro Category Computer Hardware

Documents that we receive from a manufacturer of a Supermicro SUPERO H8QGI+-F can be divided into several groups. They are, among others:
- Supermicro technical drawings
- SUPERO H8QGI+-F manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro SUPERO H8QGI+-F
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro SUPERO H8QGI+-F.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro SUPERO H8QGI+-F, service manual, brief instructions and user manuals Supermicro SUPERO H8QGI+-F. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro SUPERO H8QGI+-F.

Similar manuals

A complete manual for the device Supermicro SUPERO H8QGI+-F, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro SUPERO H8QGI+-F by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro SUPERO H8QGI+-F.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro SUPERO H8QGI+-F - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro SUPERO H8QGI+-F, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro SUPERO H8QGI+-F, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro SUPERO H8QGI+-F - which should help us in our first steps of using Supermicro SUPERO H8QGI+-F
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro SUPERO H8QGI+-F
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro SUPERO H8QGI+-F in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro SUPERO H8QGI+-F?

Use the form below

If you did not solve your problem by using a manual Supermicro SUPERO H8QGI+-F, ask a question using the form below. If a user had a similar problem with Supermicro SUPERO H8QGI+-F it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)