Manual Kathrein UFS 910

16 pages 1.53 mb
Download

Go to site of 16

Summary
  • Kathrein UFS 910 - page 1

    Manual UFS 902/910 Application of external USB storage media for recording and playback ...

  • Kathrein UFS 910 - page 2

    2 UFS 902/910 KA THREIN cannot be held liable for damage, loss of data or consequential loss of any kind (e.g. loss of pro fi t, interruption of production, loss of data and information, or other detriment to assets) resulting from the use or non-usability of this KA THREIN product, even where KA THREIN has pointed out the possibility of such loss ...

  • Kathrein UFS 910 - page 3

    3 Connect the USB storage device to one of the two USB 2.0 interfaces on the receiver rear panel. Press the  button to access the receiver ’ s main menu. The following display will appear: Select the “Service menu” with the  buttons and con fi rm by pressing  . Next, use the  but- tons to select “USB Device Management” ...

  • Kathrein UFS 910 - page 4

    4 Please Wait Use the  buttons to choose the selection fi eld “Formatting” and con fi rm the launch of the formatting procedure with the  button. The following display will appear: Formatting leads to permanent deletion of all data saved on the storage medium! Con fi rm message with the  button. The following display will appear: ...

  • Kathrein UFS 910 - page 5

    5 SCANNING EXTERNAL USB ST ORAGE MEDIA FORMA TTING AND SCANNING AN EXTERNAL USB ST ORAGE MEDIUM During scanning, the connected USB storage medium is scanned for errors, which are automati- cally corrected by the receiver . Loss of re- cordings is likely! If more than one external storage medium is connected to the receiver , use the  to selec ...

  • Kathrein UFS 910 - page 6

    6 RECORDING Press the  button. The following display will appear: OTR (ONE TOUCH RECORDING) Y ou are now able to change the settings (default) for recording: Select the parameters to be changed with the  buttons. Use the  buttons to make changes. T arget: If more than one storage medium is connected to the receiver or if a storage me ...

  • Kathrein UFS 910 - page 7

    7 Press the  button. The following display appears: PROGRAMMING A RECORDING VIA EPG (TIMER) RECORDING Select the desired channel from the available lists/views as described in the UFS 910 manual. After selecting the desired channel, press the " (yellow) button. Use the  buttons to choose the programme to be recorded and then press the ...

  • Kathrein UFS 910 - page 8

    8 If required, use the cursor  buttons to select the desired external storage device. If more than one storage medium is connected to the receiver or if a storage medium with several partitions has been connected, you can select the storage medium or partition on which the recordings are to be made. Subsequently , use the  buttons to ac ...

  • Kathrein UFS 910 - page 9

    9 PLA YBACK T o open the recording list, press the button  , # (select with the  buttons and then press  ) or the  button. the following display will appear: In the view , recordings can be sorted according to the following criteria: - # (green) button sorted by date (press the  button to sort according to date, title or duration ...

  • Kathrein UFS 910 - page 10

    10 REMOTE CONTROL BUTT ONS AND THEIR FUNCTIONS Y ou have the following options during playback:  Pause Interrupts playback. T o resume playback, press again or press the Play button.  Info 1x Displays progress bar showing the time played back so far as well as the remaining time of the recording (see picture on next page). Press the Exit butt ...

  • Kathrein UFS 910 - page 11

    11 PLA YBACK Displays current playback mode (in example, “Play”) Re Remaining time BT i T ime played back so far EDITING RECORDINGS IN THE RECORDING LIST Use the  buttons to select the recording you would like to edit. Next, press the  button to call up the “Editing” menu. The following display will appear: Use the  buttons t ...

  • Kathrein UFS 910 - page 12

    12 PLA YBACK Rename: Press the  button to rename the recording you have previously selected. A keypad will appear with which you can enter names alphanumerically . For instructions on how to enter names, please see the section “Alphanumeric Input” in your UFS 902/910 manual. Change category: In order to assign a recording previously selected ...

  • Kathrein UFS 910 - page 13

    13 TIMESHIFT (TIME-SHIFTED VIEWING) If you cannot catch the beginning of a programme because you are occupied with something else, or if you have to take a break from watching while a programme is being broadcast, you can watch it in timeshift mode. Press the  button to activate this mode. The following display will appear: Y ou can change the f ...

  • Kathrein UFS 910 - page 14

    14 SA VE/EXTEND TIMESHIFT RECORDING T o save a timeshift recording and not lose it after you have fi nished viewing it, or to extend the recording time, press the  button. The following message will appear: Use the  buttons to select the entry to be modi fi ed. Change the settings using the  buttons. Con fi rm new settings by pres ...

  • Kathrein UFS 910 - page 15

    15 MESSAGES/ERROR MESSAGES This message is displayed whenever a hard disk which is not F A T32 formatted is connected to a USB interface. The hard disk can then be formatted in the menu “Service menu/USB Device Management” (see pages 3-4). If the connected hard disk contains F A T32 partitions, this message is not displayed. USB device could no ...

  • Kathrein UFS 910 - page 16

    Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 10 04 44 • 83004 Rosenheim 936.3305/B/1008/ZWT - Subject to technical modi fi cations! USB device is being formatted. The USB storage device is write-protected. Check and/or deactivate the device. Recording or deletion is not possible. The connected U ...

Manufacturer Kathrein Category Satellite TV System

Documents that we receive from a manufacturer of a Kathrein UFS 910 can be divided into several groups. They are, among others:
- Kathrein technical drawings
- UFS 910 manuals
- Kathrein product data sheets
- information booklets
- or energy labels Kathrein UFS 910
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kathrein UFS 910.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kathrein UFS 910, service manual, brief instructions and user manuals Kathrein UFS 910. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kathrein UFS 910.

Similar manuals

A complete manual for the device Kathrein UFS 910, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kathrein UFS 910 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kathrein UFS 910.

A complete Kathrein manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kathrein UFS 910 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kathrein UFS 910, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kathrein UFS 910, that we can find in the current document
3. Tips how to use the basic functions of the device Kathrein UFS 910 - which should help us in our first steps of using Kathrein UFS 910
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kathrein UFS 910
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kathrein UFS 910 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kathrein UFS 910?

Use the form below

If you did not solve your problem by using a manual Kathrein UFS 910, ask a question using the form below. If a user had a similar problem with Kathrein UFS 910 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)