English dropdown-ico

Manual Kenwood KDC-M4524G

32 pages 0.61 mb
Download

Go to site of 32

Summary
  • Kenwood KDC-M4524G - page 1

    © B64-2650-00/00 (IW) CD-RECEIVER INSTR UCTION MANU AL KDC-M4524G KDC-M4524G_U.S_Cover 03.7.18 10:20 AM Page 1 ...

  • Kenwood KDC-M4524G - page 2

    — 2 — English Contents Safety precautions ......................3 About CDs ...................................5 Notes on playing MP3 ................6 General features .........................8 Power Selecting the Source V olume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Theft Deterrent Faceplate T uner featu ...

  • Kenwood KDC-M4524G - page 3

    — 3 — To prevent injury and/or fire, take the following precautions: • Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) ...

  • Kenwood KDC-M4524G - page 4

    — 4 — English • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer . •P ress the reset button if the Disc auto changer fails to operate correctly . Normal operation should be restored. • Characters in the LCD may become difficult to read in te ...

  • Kenwood KDC-M4524G - page 5

    — 5 — About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...

  • Kenwood KDC-M4524G - page 6

    — 6 — English Notes on playing MP3 This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, however , that the MP3 recording media and formats acceptable are limited. When writing MP3, pay attention to the following restrictions. Acceptable media The MP3 recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW . When using CD-RW , ...

  • Kenwood KDC-M4524G - page 7

    — 7 — MP3 playing order When selected for play , Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played. Y ou may be able to set the ord ...

  • Kenwood KDC-M4524G - page 8

    Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" CD "CD" External disc ( Optional accessory ) "DISC CH" Auxiliary input ( Optional accessory ) "AUX1" Standby (Illumination only mode) "ALL OFF" ...

  • Kenwood KDC-M4524G - page 9

    Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [Q] button. Each time the button is pressed the sound setting switches. Sound setting Display Flat "Flat" User memory "User" Rock "Rock" Pops "Pops" ...

  • Kenwood KDC-M4524G - page 10

    Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Program Service name or Frequency Radio text, Program Service name or Frequency "R-TEXT" Clock Switching Display 1 Enter Standby Press the [SRC] button. Select the "A ...

  • Kenwood KDC-M4524G - page 11

    The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while ...

  • Kenwood KDC-M4524G - page 12

    Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on ...

  • Kenwood KDC-M4524G - page 13

    Calling up the stations in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Call up the station Press the desired [1] — [6] button. Preset T uning Putting a station with good reception in the memory automatically . 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Enter Menu mode Press the [MENU] button for a ...

  • Kenwood KDC-M4524G - page 14

    Selecting the Program T ype and searching for a station. PTY (Program T ype) Scrolling the displayed radio text. Press the [SCRL] button for at least 1 second. Radio T ext Scroll Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Press the [TI] button. Each time the button ...

  • Kenwood KDC-M4524G - page 15

    24. T ravel "T ravel" 25. Leisure "Leisure" 26. Jazz Music "Jazz" 27. Country Music "Country" 28. National Music "Nation M" 29. Oldies Music "Oldies" 30. Folk Music "Folk M" 31. Documentary "Document" • Speech and Music include the Program type shown below . Music: No ...

  • Kenwood KDC-M4524G - page 16

    Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program T ype)> (page 14). 2 Enter Changing Language mode Press the [DISP] button. 3 Select the language Press the [FM] or [AM] button. Each time the button is pressed the language switches as shown below . Language Display English "English" French "F ...

  • Kenwood KDC-M4524G - page 17

    When a CD is inserted Press the [SRC] button. Select the "CD" display . When a CD is inserted, the "IN" indicator is ON. Eject the CD Press the [ 0 ] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. The MP3 media that this unit can play are CD-ROM, CD-R, and CD- RW . T ...

  • Kenwood KDC-M4524G - page 18

    Replaying the song, disc in the Disc changer or MP3 folder you're listening to. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below . In CD & External disc source Repeat play Display T rack Repeat "Repeat ON"/ "T -Repeat ON" Disc Repeat (In Disc Changer) "D-Repeat ON" ...

  • Kenwood KDC-M4524G - page 19

    Play the songs on all the discs in the disc changer in random order . Press the [M.RDM] button. Each time the button is pressed the Magazine Random Play turns ON or OFF . When it's ON, "M-Random ON" is displayed. When the [ ¢ ] button is pressed, the next song select starts. Magazine Random Play (Function of disc changer) Play all t ...

  • Kenwood KDC-M4524G - page 20

    Attaching a title to a CD. 1 Play the disc you want to attach a name to A title can't be attached to a MD. 2 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 3 Select Name set mode Press the [FM] or [AM] button. Select the "NAME SET" display . 4 Enter Name set mode Press the [ 4 ] or [ ¢ ...

  • Kenwood KDC-M4524G - page 21

    GSM TI SRC AM FM MENU ¢ 4 Menu system Scrolling the displayed CD text, MP3 text, or MD title. Press the [SCRL] button for at least 1 second. T ext/T itle Scroll 7 Select the characters Press the [FM] or [AM] button. 8 Repeat steps 5 through 7 and enter the name. 9 Exit Name Set mode Press the [MENU] button. • When operation stops for 10 seconds ...

  • Kenwood KDC-M4524G - page 22

    Synchronizing the RDS station time data and this unit's clock. Display Setting "SYNC ON" Synchronizes the time. "SYNC OFF" Adjust the time manually . It takes 3 to 4 minutes to synchronize the clock. Synchronize Clock This adjustment can be done when the <Synchronize Clock> (page 22) is set as OFF . 1 Select Clock Adj ...

  • Kenwood KDC-M4524G - page 23

    Only stations whose reception is good are searched for in auto seek tuning. Display Setting "Local.S OFF" The local seek function is OFF . "Local.S ON" The local seek function is ON. Local Seek <In T uner mode> radio isn't being listened to. Also, the time interval when interrupt is prohibited can be set. Display and ...

  • Kenwood KDC-M4524G - page 24

    Noise can be reduced when stereo broadcasts are received as monaural. Display Setting "MONO OFF" The monaural reception is OFF . "MONO ON" The monaural reception is ON. Monaural Reception <In FM reception> When the TI function is ON and poor reception conditions are experienced when listening to a traffic information stati ...

  • Kenwood KDC-M4524G - page 25

    Setting the timer to turn this unit's power OFF automatically when Standby mode continues. Using this setting can save the vehicle's battery power . Display Setting "OFF – – –" Power OFF T imer function is OFF . "OFF 20MIN" T urns the power OFF after 20 minutes. (Original setting) "OFF 40MIN" T urns the ...

  • Kenwood KDC-M4524G - page 26

    When there is a problem on playing a CD with special format, this setting play the CD by force. Display Setting "CD READ 1" Play CD and MP3. "CD READ 2" Play CD by force. Setting "CD READ 2" cannot play MP3. Some music CDs may not be played back even in the "CD READ 2" mode. CD Read Setting <In Standby mod ...

  • Kenwood KDC-M4524G - page 27

    — 27 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the ...

  • Kenwood KDC-M4524G - page 28

    — 28 — English Disc source ? " AUX1 " is displayed without achieving External disc control mode. 50 ✔ Unsupported disc changer is connected. 51 ☞ Use the disc changer mentioned in the IMPORT ANT INFORMA TION of the section on <Safety precautions> (page 3). ? The specified disc does not play , but another one plays instead. 5 ...

  • Kenwood KDC-M4524G - page 29

    — 29 — Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. E0d ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playing again. NO NAME: At ...

  • Kenwood KDC-M4524G - page 30

    English — 30 — FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ................................. 0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) .............................. 1.6 µV/75 Ω Frequency response ( ± 3 dB) .................................30 Hz – 15 kHz Signa ...

  • Kenwood KDC-M4524G - page 31

    KDC-M4524G_U.S 03.7.8 9:23 AM Page 31 ...

  • Kenwood KDC-M4524G - page 32

    KDC-M4524G_U.S 03.7.8 9:23 AM Page 32 ...

Manufacturer Kenwood Category CD Player

Documents that we receive from a manufacturer of a Kenwood KDC-M4524G can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KDC-M4524G manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KDC-M4524G
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KDC-M4524G.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KDC-M4524G, service manual, brief instructions and user manuals Kenwood KDC-M4524G. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KDC-M4524G.

Similar manuals

A complete manual for the device Kenwood KDC-M4524G, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KDC-M4524G by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KDC-M4524G.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KDC-M4524G - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KDC-M4524G, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KDC-M4524G, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KDC-M4524G - which should help us in our first steps of using Kenwood KDC-M4524G
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KDC-M4524G
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KDC-M4524G in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KDC-M4524G?

Use the form below

If you did not solve your problem by using a manual Kenwood KDC-M4524G, ask a question using the form below. If a user had a similar problem with Kenwood KDC-M4524G it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)