English dropdown-ico

Manual Whirlpool WWDC 9444

17 pages Not applicable
Download

Go to site of 17

Summary
  • Whirlpool WWDC 9444 - page 1

    ...

  • Whirlpool WWDC 9444 - page 2

    EN 1 INTENDED USE This washing machine is exclusively destined to treat machine washable laundry in quantities which are usual for private households. • Observe the instructions given in these Instructions for Use, the Installation Guide and the Programme Chart when using the washing machine. • Keep these Instructions for Use, the Programme Cha ...

  • Whirlpool WWDC 9444 - page 3

    EN 2 2. Packaging • The packaging material is entirely recyclable, and marked with the recycling symbol . Adhere to current local regulations when disposing of packaging material. 3. Disposing of packaging and scrapping old washing machines • The washing machine is built from reusable materials. It must be disposed of in compliance with current ...

  • Whirlpool WWDC 9444 - page 4

    EN 3 BEFORE USING THE WASHING MACHINE 1. Removing the packaging and inspection • After unpacking, make sure that the washing machine is undamaged. If in doubt, do not use the washing machine. Contact After-Sales Service or your local retailer. • Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as th ...

  • Whirlpool WWDC 9444 - page 5

    EN 4 DESCRIPTION OF THE WASHING MACHINE DOOR BEFORE THE FIRST WASH CYCLE 1. Worktop 2. Control panel 3. Detergent dispenser 4. Service plate (inside the door) 5. Door 6. Pump access with filter and emergency drain hose (if available) behind the plinth 7. Adjustable feet To open the door, hold the door handle and pull the door. Close the door by pre ...

  • Whirlpool WWDC 9444 - page 6

    EN 5 PREPARATION OF THE WASHING 1. Sort the laundry according to... • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwash items. • Colour Separate coloured and white items. Wash new coloured articles separately. • Size Wash items of different sizes in the same load to improve washing efficiency and d ...

  • Whirlpool WWDC 9444 - page 7

    EN 6 Please note: Too much detergent can result in excess foam formation, which reduces washing efficiency. If the washing machine detects too much foam, it may prevent spinning, or prolong the programme duration and increase the water consumption (see also remarks on foam formation in the “Troubleshooting Guide”). Insufficient detergent may re ...

  • Whirlpool WWDC 9444 - page 8

    EN 7 Using chlorine bleach • Wash your laundry in the desired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bleach to the SOFTENER chamber (close the detergent dispenser carefully). • Immediately after end of programme, start the “Rinse and Spin” programme to eliminate any residual bleach smell; if you want, you c ...

  • Whirlpool WWDC 9444 - page 9

    EN 8 DRAINING RESIDUAL WATER/ CLEANING THE FILTER We recommend that you check and clean the filter regularly, at least two or three times a year, especially : • If the “Clean pump” indication lights up. • If the appliance is not draining properly or if it fails to perform spin cycles. If the washing machine stands in a room prone to frost, ...

  • Whirlpool WWDC 9444 - page 10

    EN 9 CARE AND MAINTENANCE Appliance exterior and control panel • Wash down with a soft, damp cloth. Dry with a soft cloth. Appliance interior • After each washing, leave the door open for some time to allow the inside of the appliance to dry. • If you never or seldom wash your laundry at 95 °C, we recommend to occasionally run a 95 °C progr ...

  • Whirlpool WWDC 9444 - page 11

    EN 10 TROUBLESHOOTING GUIDE Your washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Problem Causes, Solutions, Tips Appliance does not start, no indicato ...

  • Whirlpool WWDC 9444 - page 12

    EN 11 Description of failure indicators The washing machine is at a standstill for several minutes in the middle of a running programme; the wash programme seems not to proceed Normal function of the washing machine used for optimizing the rinse phase. One reason for such a pause can be that you might have used too much detergent; the washing machi ...

  • Whirlpool WWDC 9444 - page 13

    EN 12 If any of the faults described above persist, unplug the appliance, turn off the water tap and contact our After-Sales Service (see next chapter). Failure indicator blinks Indication on display (if available) Description Causes Solutions “Service” from “F03” to “F43” (except “F18” and “F24”) “Electrical module fault” P ...

  • Whirlpool WWDC 9444 - page 14

    EN 13 REMAINING MOISTURE CONTENT OF THE LAUNDRY AFTER SPINNING The degree of moisture remaining in the laundry after spinning mainly depends on the fabric type, the selected programme and spin speed. The lowest remaining moisture content can be achieved using the wash programme referred to by the Energy Label, with maximum spin speed. This programm ...

  • Whirlpool WWDC 9444 - page 15

    EN 14 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the washing machine continues to function incorrectly, call our After-Sales Service. Specify: • The nature of the problem. • The ...

  • Whirlpool WWDC 9444 - page 16

    EN 15 ELECTRICAL CONNECTION Manufacturer: Whirlpool Europe s.r.l. Viale Guido Borghi 27 21025 Comerio (VA) Italy For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 13 ...

  • Whirlpool WWDC 9444 - page 17

    5019 300 00591 Whirlpool® Registered tr ademark/TM T rademark of W hirlpool group of c ompanies © Copyright Whirlpool Europe s.r .l. 2012. All rights reserved - http://www.whirlpool.eu EE LV PL GB LT ...

Manufacturer Whirlpool Category Washing Machine

Documents that we receive from a manufacturer of a Whirlpool WWDC 9444 can be divided into several groups. They are, among others:
- Whirlpool technical drawings
- WWDC 9444 manuals
- Whirlpool product data sheets
- information booklets
- or energy labels Whirlpool WWDC 9444
All of them are important, but the most important information from the point of view of use of the device are in the user manual Whirlpool WWDC 9444.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Whirlpool WWDC 9444, service manual, brief instructions and user manuals Whirlpool WWDC 9444. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Whirlpool WWDC 9444.

Similar manuals

A complete manual for the device Whirlpool WWDC 9444, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Whirlpool WWDC 9444 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Whirlpool WWDC 9444.

A complete Whirlpool manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Whirlpool WWDC 9444 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Whirlpool WWDC 9444, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Whirlpool WWDC 9444, that we can find in the current document
3. Tips how to use the basic functions of the device Whirlpool WWDC 9444 - which should help us in our first steps of using Whirlpool WWDC 9444
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Whirlpool WWDC 9444
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Whirlpool WWDC 9444 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Whirlpool WWDC 9444?

Use the form below

If you did not solve your problem by using a manual Whirlpool WWDC 9444, ask a question using the form below. If a user had a similar problem with Whirlpool WWDC 9444 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)