English dropdown-ico

Manual Toshiba IK-WB80A

123 pages 47.89 mb
Download

Go to site of 123

Summary
  • Toshiba IK-WB80A - page 1

    NETWORK CAMERA Model: IK-WB80A User's Manual If the URL changes, refer to the T oshiba website (http://www .toshiba.com/). For information on our latest products and peripheral devices, refer to the following Website: http://www .toshibasecurity .com ...

  • Toshiba IK-WB80A - page 2

    2 T able of Contents Int roduction �������������������������������������������������������������������������������������������������������� ...

  • Toshiba IK-WB80A - page 3

    3 External Microphone .......................................................................................................................................... 1 13 Day / Night setting ....................... ....................................................................................................................... 1 13 Recommended sys ...

  • Toshiba IK-WB80A - page 4

    4 Introduction FCC (USA)-INFORMA TION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generate ...

  • Toshiba IK-WB80A - page 5

    5 Thank you for purchasing the IK-WB80A Network Camera. Before you start using the camera, read this User's Manual carefully to ensure correct usage. Once you have nished reading this User's Manual, keep it in a convenient place for future reference. The design, specications, software, and User's Manual contents are subject to ...

  • Toshiba IK-WB80A - page 6

    6 Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. W arnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating an ...

  • Toshiba IK-WB80A - page 7

    7 12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power- line surges. If lightning occurs, do not touch the u ...

  • Toshiba IK-WB80A - page 8

    8 Important Safeguards (Cont.) CAUTION T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SER VICEABLE P AR TS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" ...

  • Toshiba IK-WB80A - page 9

    9 Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear . A vertical stripe may appear on the screen. However , this is not a malfunction. l T reat the camera with care Dropping or subj ...

  • Toshiba IK-WB80A - page 10

    10 Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user , whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resul ...

  • Toshiba IK-WB80A - page 11

    1 1 Be sure to use only the supplied AC adapter . Using a different AC adapter may cause the camera to malfunction, heat up, or catch re. Before using the AC adapter , carefully read and observe the Important Safeguards ( → page 5) and the notes below . ● Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-24 ...

  • Toshiba IK-WB80A - page 12

    12 Specications AC adapter (3A-183WP12) Power source : 100-240V AC 50/60 Hz Rated output : 12V DC, 1.5 A Ambient temperature guaranteed for performance : 32°F to 104°F (0°C to 40°C) Storage temperature : -14°F to 158°F (-10°C to 70°C) Maximum external dimensions : 2.91(L) x 1.71(W) x 1.34(H) inches (74(L) x 43.5(W) x 34(H) mm) Cord lengt ...

  • Toshiba IK-WB80A - page 13

    13 Package Contents l IK-WB80A l Sun Shield Kit Wrench T ape Rubber Pad l W all Mount Bracket Kit W all Mount Plate Screw and Anchors Kit Wrench IK-WB80A l Quick Start Guide and Important Safeguards l W aterproof Connector l AC adapter l CD-ROM l Alignment Sticker / Silica Gel l W arranty l W aterproof Connector for RJ45 Ethernet Enclosure ...

  • Toshiba IK-WB80A - page 14

    14 Physical Description IR LED Lens Light Sensor Pin Name 1 12V DC Output 2 Digital Output 3 Digital Input 4 Ground 5 AC 24V 6 AC 24V 7 RS485 + 8 RS485 - Pin Name 1 Microphone In 2 Ground 3 Audio Out 4 Ground 8 7 6 5 4 3 2 1 4 3 2 1 General I/O T erminal Block This Network Camera provides a general I/O terminal block which is used to connect extern ...

  • Toshiba IK-WB80A - page 15

    15 ● 12V DC is outputted from 1-pin only when connected to a power supply . ● When an AC adapter or PoE is connected, don’t supply AC24V from this terminal. The diagrams below apply when "Digital Input" is used for an alarm input. NO TE Rx - Rx + RX - Rx + Twisted pair line RS485 + PTZ driver RS485 - PTZ scanner RS485 connection IK- ...

  • Toshiba IK-WB80A - page 16

    16 Status LED The LED indicates the status of the Network Camera. Item LED status Description 1 Steady Red Red LED unlighted Power on and system booting Power off 2 Steady Red + Blink Green every 1 sec. Steady Red + Green LED unlighted Network works (heartbeat) Network fail 3 Steady Red + Blink Green every 2 sec. Audio mute (heartbeat) 4 Blink Red ...

  • Toshiba IK-WB80A - page 17

    17 SD/SDHC Card and Capacity This network camera is compliant with SDHC 32GB /16GB / 8GB and other preceding standard SD cards for local storage. ● There is a limit to the number of rewrites that is possible with the SD memory card. Replacing the SD memory card when performing periodic maintenance of the camera is recommended. ● Do not use 512M ...

  • Toshiba IK-WB80A - page 18

    Network Deployment In this user ’s manual, “User” refers to whoever has access to the Network Camera, and “Administrator” refers to the person who can congure the Network Camera and grant user access to the camera. Network Deployment is shown in the Quick Start Guide(QSG). Please refer to page 15 of the QSG. Setting up the Network Came ...

  • Toshiba IK-WB80A - page 19

    2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router . ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network pag ...

  • Toshiba IK-WB80A - page 20

    20 Software Installation Installation Wizard (IW), a free-bundled software packaged in the product CD, helps to set up your Network Camera in a LAN. 1. Install the IW under the Software Utility directory from the software CD. Double click the IW shortcut on your desktop to launch the program. 2. The program will analyze your network environment. Af ...

  • Toshiba IK-WB80A - page 21

    21 Ready to Use 1. Access the Network Camera on the LAN. 2. Retrieve live video through a web browser . Adjusting the Lens Adjusting the Lens is shown in the Quick Start Guide (QSG). Please refer to 18 pages of QSG. Completion Completion is shown in the Quick Start Guide (QSG). Please refer to 19 pages of QSG. 2010/09/01 13:49:39 ...

  • Toshiba IK-WB80A - page 22

    22 This chapter explains how to access the Network Camera through web browsers, RTSP players and 3GPP-compatible mobile devices. Using W eb Browsers Use Installation Wizard to access the Network Cameras on the LAN. If your network environment is not a LAN, follow these steps to access the Network Camera: 1. Launch your web browser (Microsoft ® Int ...

  • Toshiba IK-WB80A - page 23

    23 ► If you see a dialog box indicating that your security settings prohibit running ActiveX Controls, please enable the ActiveX Controls for your browser . 1. Choose T ools > Internet Options > Security > Custom Level. 2. Look for Download signed ActiveX controls; select Enable or Prompt. Click OK . 3. Refresh your web browser , the n i ...

  • Toshiba IK-WB80A - page 24

    24 Using RTSP Players T o view the MPEG-4 streaming media using RTSP players, you can use players that support RTSP streaming. As most ISPs and players only allow RTSP streaming through port number 554, please set the RTSP port to 554. For more information, please refer to RTSP Streaming on page 55. For example: 4. The live video will be displayed ...

  • Toshiba IK-WB80A - page 25

    25 Using 3GPP-compatible Mobile Devices T o view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet. For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 18. T o utilize this feature, plea ...

  • Toshiba IK-WB80A - page 26

    26 This chapter explains the layout of the main page. It is composed of the following sections: TOS HIBA Logo, Host Name, Camera Control Area, Conguration Area, Menu, and Live Video Window . TOSHIBA Logo Click this logo to visit the T OSHIBA website. Host Name The host name can be customized to t your needs. For more information, please refer ...

  • Toshiba IK-WB80A - page 27

    27 Conguration Area Client Settings: Click this button to access the client setting page. For more information, please refer to Client Settings on page 30. Conguration: Click this button to access the conguration page of the Network Camera. It is suggested that a password be applied to the Network Camera so that only the administrator can ...

  • Toshiba IK-WB80A - page 28

    28 Pause: Pause the transmission of the streaming media. The button becomes the Resume button after clicking the Pause button. Stop: Stop the transmission of the streaming media. Click the Resume button to continue transmission. Start MP4 Recording: Click this button to record video clips in MP4 file format to your computer . Press the S top M P4 R ...

  • Toshiba IK-WB80A - page 29

    29 Snapshot: Click this button to capture and save still images. The captured images will be displayed in a pop-up window . Right-click the image and choose Save Picture As to save it in JPEG (*.jpg) or BMP (*.bmp) format. Digital Zoom: Click and uncheck “Disable digital zoom” to enable the zoom operation. The navigation screen indicates the pa ...

  • Toshiba IK-WB80A - page 30

    30 This chapter explains how to select the stream transmission mode and saving options on the local computer . When completed with the settings on this page, click Save on the page bottom to enable the settings. Clicking the Client Settings in Configuration Area of a Main Page, the following w indow is shown. MPEG-4 Media Options Select to stream v ...

  • Toshiba IK-WB80A - page 31

    31 MP4 Saving Options Users can record live video as they are watching it by clicking Start MP4 Recording on the main page. Here, you can specify the storage destination and le name. Folder: Specify a storage destination for the recorded video les. File name prex: Enter the text that will be appended to the front of the video le name. A ...

  • Toshiba IK-WB80A - page 32

    32 Click Conguration on the main page to enter the camera setting pages shown below . Note that only Administrators can access the conguration page. TOSHIBA of fers an easy-to-use user interface that helps you set up your network camera with minimal effort. T o simplify the setting procedure, two types of user interfaces are available: Advanc ...

  • Toshiba IK-WB80A - page 33

    33 Advanced Mode Each function on the conguration list will be explained in the following sections. Those functions that are displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up advanced functions, please click [Advanced Mode] on the bottom of the conguration list to quickly switch over . System This section e ...

  • Toshiba IK-WB80A - page 34

    34 System Time Keep current date and time: Select this option to preserve the current date and time of the Network Camera. The Network Camera’ s internal real-time clock maintains the date and time even when the power of the system is turned off. Sync with computer time: Select this option to synchronize the date and time of the Network Camera wi ...

  • Toshiba IK-WB80A - page 35

    35 Security This section explains how to enable password protection and create multiple accounts. Root Password The administrator account name is “root”, which is permanent and can not be deleted. If you want to add more accounts in the Manage User column, please apply the password for the “root” account rst. 1. T ype the password identi ...

  • Toshiba IK-WB80A - page 36

    36 HTTPS (Hypertext T ransfer Protocol over SSL) Advanced Mode This section explains how to enable authentication and encrypted communication over SSL (Secure Socket Layer). It helps protect streaming data transmission over the Internet on higher security level. Enable HTTPS Check this item to enable HTTPS communication, then select a connection op ...

  • Toshiba IK-WB80A - page 37

    37 4. Th e Certicate Information will automatically be d isplayed in the third column as shown below . Y ou can click Property to view detailed information about the certicate. 5. Click Home to return to the main page. Change the address from “ http:// ” to “ https:// “ in the address bar and press Enter on your keyboard. Some Securit ...

  • Toshiba IK-WB80A - page 38

    38 Create self-signed certificate manually 1. Select this option. 2. Click Create to open the Create Certicate page, then click Save to generate the certicate. 3. The Certicate Information will automatically be displayed in the third column as shown below . Y ou can click Property to see detailed information about the certicate. Create ...

  • Toshiba IK-WB80A - page 39

    39 3. If you see the follo wing Information bar , click OK and click on the Information bar at t he top of the page to allow pop-ups. 4. The pop-up window shows an example of a certicate request. ...

  • Toshiba IK-WB80A - page 40

    40 5. L oo k f or a t rus te d c er tif ic ate a ut hor it y th at is su es d ig ita l c ert if ica te s. E nro ll t he N etw or k Ca me ra. W ait for the certificate authority to issue a SSL certificate; click Browse... to search for the issued certicate, then click Upload in the second column. ● How do I cancel the HTTPS settings? 1. Uncheck ...

  • Toshiba IK-WB80A - page 41

    41 SNMP (Simple Network Management Protocol) Advanced Mode This section explains how to use the SNMP on the network camera. The Simple Network Management Protocol is an application layer protocol that facilitates the exchange of management information between network devices. It helps network administrators to remotely manage network devices and ? ...

  • Toshiba IK-WB80A - page 42

    42 Network This section explains how to congure a wired network connection for the Network Camera. Network T ype LAN Select this option when the Network Camera is deployed on a local area network (LAN) and is intended to be accessed by local computers. The default setting for the Network T ype is LAN. Rememer to click Save when you complete the ...

  • Toshiba IK-WB80A - page 43

    43 Enable UPnP port forwarding: T o access the Network Camera from the Internet, select this option to allow the Network Camera to open ports on the router automatically so that video streams can be sent out from a LAN. T o utilize of this feature, make sure that your router supports UPnP TM and it is activated. PPPoE (Point-to-point over Ethernet) ...

  • Toshiba IK-WB80A - page 44

    44 ● Steps to enable the UPnP TM user interface on your computer: Note that you must log on to the computer as a system administrator to install the UPnP T M components. 1. Go to Start, click Control Panel , then click Add or Remove Programs . 2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components . 3. In the Windows Com ...

  • Toshiba IK-WB80A - page 45

    45 4. In the Networking Services dialog box, select Universal Plug and Play and click OK . 5. Click Next in the following window . 6. Click Finish . UPnP TM is enabled. ● How does UPnP TM work? UPnP TM networking technology provides automatic IP conguration and dynamic discovery of devices added to a network. Services and capabilities offered ...

  • Toshiba IK-WB80A - page 46

    46 Enable IPv6 Select this option and click Save to enable IPv6 settings. Please note that this only works if your network environment and hardware equipment support IPv6. The browser should be Microsoft ® Internet Explorer 6.5 or above. When IPv6 is enabled, by default, the network camera will listen to router advertisements and be assigned with ...

  • Toshiba IK-WB80A - page 47

    47 Please follow the steps below to link to an IPv6 address: 1. Open your web browser . 2. Enter the link-global or link-local IPv6 address in the address bar of your web browser . 3. The format should be: 4. Press Enter on the keyboard or click Refresh button to refresh the webpage. For example: ● If you have a Secondary HTTP port (the default v ...

  • Toshiba IK-WB80A - page 48

    48 IEEE 802.1x Advanced Mode Enable this function if your network environment uses IEEE 802.1x, which is a port-based network access control. The network devices, intermediary switch/access point/hub, and RADIUS server must support and enable 802.1x settings. The 802.1x standard is designed to enhance the security of local area networks, which prov ...

  • Toshiba IK-WB80A - page 49

    49 3. When all settings are complete, move the Network Camera to the protected LAN by connecting it to an 802.1x enabled switch. The devices will then start the authentication automatically . ● The authentication process for 802.1x: 1. The Certicate Authority (CA) provides the required signed certicates to the Network Camera (the supplicant ...

  • Toshiba IK-WB80A - page 50

    50 QoS (Quality of Service) Advanced Mode Quality of Service refers to a resource reservation control mechanism, which guarantees a certain quality to dif ferent services on the network. Quality of service guarantees are important if the network capacity is insufcient, especially for real-time streaming multimedia applications. Quality can be de ...

  • Toshiba IK-WB80A - page 51

    51 QoS/DSCP (the Dif fServ model) DSCP-ECN defines QoS at Layer 3 (Network Layer). The Differentiated Services (Dif fServ) model is based on packet marking and router queuing disciplines. The marking is done by adding a eld to the IP header , called the DSCP (Diff erentiated Services Codepoint). This is a 6-bit field that provides 64 different c ...

  • Toshiba IK-WB80A - page 52

    52 HTTP Advanced Mode T o utilize HTTP authentication, make sure that your have set a password for the Network Camera rst; please refer to Security on page 35 for details. Authentication: Depending on your network security requirements, the Network Camera provid es two types of security settings for an HTTP transaction: basic and digest. If basi ...

  • Toshiba IK-WB80A - page 53

    53 HTTPS By default, the HTTPS port is set to 443. It can also be assigned to another port number between 1025 and 65535. T wo way audio By default, the two way audio port is set to 5060. Also, it can also be assigned to another port number between 1025 and 65535. The Network Camera supports two way audio communication so that operators can transmi ...

  • Toshiba IK-WB80A - page 54

    54 Click to enable audio transmission to the Network Camera; click to adjust the volume of microphone; click to turn of f the audio. T o stop talking, click again. FTP The FTP server allows the user to save recorded video clips. Y ou can utiliz e TOS HIBA Installation Wizard to upgrade the rmware via FTP server . By default, the FTP port is set ...

  • Toshiba IK-WB80A - page 55

    55 RTSP Streaming T o u til ize RT SP s tr eam ing a ut hen tic at ion , ma ke s ure t hat y ou ha ve se t a p as swo rd f or t he N etw or k Camera rst; please refer to Security on page 35 for details. Authentication: Depending on your network security requirements, the Network Camera provides three types of security settings for streaming via ...

  • Toshiba IK-WB80A - page 56

    56 RTSP port /RTP port for video, audio/ RTCP port for video, audio ■ RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the port number is set to 554. ■ The R TP (Real-time T ransport Protocol) is used to deliver video and audio data to the clients. By default, the RTP port for video is set to 5556 and th ...

  • Toshiba IK-WB80A - page 57

    57 DDNS This section explains how to congure dynamic domain name service for the Network Camera. DDNS is a service that allows your Network Camera, especially when assigned with a dynamic IP address, to have a xed host and domain name. DDNS: Dynamic domain name service Enable DDNS: Select this option to enable the DDNS setting. Provider: The ...

  • Toshiba IK-WB80A - page 58

    58 Access List Advanced Mode This section explains how to control access permission by verifying the client PC’s IP address. General Settings Maximum number of concurrent streaming connection(s) limited to: Simultaneous live viewing for 1~10 clients (including stream 1 and stream 2). The default value is 10. If you modify the value and click Save ...

  • Toshiba IK-WB80A - page 59

    59 ■ Refresh: Click this button to refresh all current connections. ■ Add to deny list: Y ou can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that those checked connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick T ime Play ...

  • Toshiba IK-WB80A - page 60

    60 Network: This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List. For example: Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List. This rule is only applied to IPv4. For example: ■ Delete Allowed/Denied list: In the Delete Allowed List or Delete Denied Li ...

  • Toshiba IK-WB80A - page 61

    61 Audio and V ideo This section explains how to congure the audio and video settings of the Network Camera. It is composed of the following two columns: Video Settings and Audio Settings. Video Settings Video title: Enter a name that will be displayed on the title bar of the live video. Color: Select to display color or black/white video stream ...

  • Toshiba IK-WB80A - page 62

    62 En ab le ti me sh if t c ac hi ng st re am Advanced Mode : C he ck t hi s i te m t o e na bl e t he ti me sh if t c ac he stream on the Network Camera, which stores video in the camera’s embedded memory for a period of time depending on the cache memory of each Network Camera. Video orientat ion: Flip--vertically reect the display of the li ...

  • Toshiba IK-WB80A - page 63

    63 White balance: Adjust the value for the best color temperature. ■ Auto The Network Camera automatically adjusts the color temperature of the light in response to different light sources. The white balance setting defaults to Auto and works well in most situations. ■ Keep current value Follow the steps below to manually set the white balance ...

  • Toshiba IK-WB80A - page 64

    64 Enable Edge Enhancement Edge enhancement is an image processing lter that enhances the edge contrast of an image or video to improve its sharpness. Enter a value from 1 to 128 to set the degree of enhancement desired. Enable Noise Reduction Noise reduction is the process of removing noise from a signal. Select the type of noise to remove and ...

  • Toshiba IK-WB80A - page 65

    65 Sensor Settings Advanced Mode Click Sensor Settings to open the Image Sensor Settings page. On this page, you can set the maximum exposure time, exposure level, and AGC (Auto Gain Control) settings. Y ou can congure two sets of sensor settings: one for normal situations, the other for special situations, such as day/night/schedule mode. Expos ...

  • Toshiba IK-WB80A - page 66

    66 If you want to congure another sensor setting for day/night/schedule mode, please click Prole to open the Sensor Settings Prole Settings page as shown below . Please follow the steps beolw to setup a prole: 1. Check Enable this prole . 2. Select the applied mode: Day mode, Night mode, or schedule mode. Please manually enter a rang ...

  • Toshiba IK-WB80A - page 67

    67 Viewing Window Advanced Mode This Network Camera supports multiple streams with frame size ranging from 176 x 144 to 1600 x 1200. The denition of multiple streams: ■ Stream 1: Users can dene the "Region of Interest" (viewing region) and the "Output Frame Rate" (size of the live view window). ■ Stream 2: Users can de ...

  • Toshiba IK-WB80A - page 68

    68 Click Viewing Window to open the viewing region settings page. On this page, you can set the Region of Interest and the Output Frame Size for stream 1 ~ 3. Please follow the steps below to set up those settings for a stream: 1. Select a stream which you want to set up the viewing region. If you want to stream out the video to a mobile device, pl ...

  • Toshiba IK-WB80A - page 69

    69 Cropping Setting Advanced Mode Click Cropping Setting to open the Cropping Settings page. Please follow the steps below to set up cropping mode for mutiple streams: 1. Click Cropping Setting to open the window as shown below . 2. Select a Captured area from the drop-down list. The oating frame, the same as the one in the Global View window on ...

  • Toshiba IK-WB80A - page 70

    70 Video quality settings for stream 1 ~ 4 Advanced Mode Click the items to display the detailed video quality settings. The selections of frame sizes will be listed accroding to your settings in the Viewing Window . This Network Camera of fers two choices of video compression standards (MPEG-4 and JPEG) for real- time viewing. If MPEG-4 mode is se ...

  • Toshiba IK-WB80A - page 71

    71 ■ Frame size Y ou can set up different video resolution for different viewing devices. For example, set a smaller frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web browsers. Note that a larger frame size takes up more bandwidth. ■ Maximum frame rate This li ...

  • Toshiba IK-WB80A - page 72

    72 ■ Video quality The video quality can be adjusted to the following settings: Acceptable, Satisfactory , Good, V ery Good, and Excellent. Y ou can also select Customize and manually enter a value from 10 (high quality) to 200 (low quality). ● Video quality and fixed quality refers to the compression rate , so a lower value will produce higher ...

  • Toshiba IK-WB80A - page 73

    73 Audio Settings Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted even if audio transmission is enabled on the Client Settings page. In that case, the following message is displayed: Input gain: Select the gain of the external audio ...

  • Toshiba IK-WB80A - page 74

    74 Motion Detection This section explains how to congure the Network Camera to enable motion detection. A total of three motion detection windows can be congured. Follow the steps below to enable motion detection: Follow the steps below to enable motion detection: 1. Click New to add a new motion detection window . 2. In the Window Name text ...

  • Toshiba IK-WB80A - page 75

    75 A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the dened threshold. If you want to congure other motion detection settings for day/night/schedule mode, please click Prole to open the Motion Detection Profile Settings page as shown below . ...

  • Toshiba IK-WB80A - page 76

    76 ● How does motion detection work? There are two motion detection parameters: Sensitivity and Percentage. In the illustration above, frame A and frame B are two sequential images. Pixel differences between the two frames are detected and highlighted in gray (frame C) and will be compared with the sensitivity setting. Sensitivity is a value that ...

  • Toshiba IK-WB80A - page 77

    77 Camera T ampering Detection This section explains how to set up camera temper detection. With tamper detection, the camera is capable of detecting incidents such as redirection , blocking or defocusing , or even spray paint . Please follow the steps below to set up the camera tamper detection function: 1. Check Enable camera tampering detection ...

  • Toshiba IK-WB80A - page 78

    78 Camera Control This section explains how to control the Network Camera’s Pan/T ilt/Zoom operation. There are two ways to enable the camera control function: 1. Mechanical: Connect the Network Camera to a PTZ driver or scanner via RS485 interface. 2. Digital: Control the e-PTZ operation. It allows users to quickly move the focus to a target are ...

  • Toshiba IK-WB80A - page 79

    79 T ransparent HTTP T unnel: If you want to use your own RS-485 device, you can use UAR T commands to build a T ransparent HTTP Tunnel. The UART commands will be sent through HTTP tunnel established between the RS-485 device and the linked camera. For detailed application notes, please refer to URL Command Guide. Preset Positions If you select the ...

  • Toshiba IK-WB80A - page 80

    80 Home page in Mechanical PTZ Mode ■ The Preset Positions will also be displayed on the home page. Select one from the drop-down list, and the Network Camera will move to the selected e-preset position. 1 ...

  • Toshiba IK-WB80A - page 81

    81 Patrol Settings Y ou can select some preset positions for the Network Camera to patrol. Please follow the steps below to set up a patrol schedule: 1. Click a preset location on the list and click Select . 2. The selected preset location will be displayed on the Source list. 3. Set the Dwelling time for the preset location during auto patrol. Y o ...

  • Toshiba IK-WB80A - page 82

    82 1 Custom Command If Custom Camera (scanner) is s ele cte d as th e PT Z dr ive r , th e Preset Position and PTZ Control Panel on the main page will be disabled. Y ou will need to congure command buttons to control the PTZ scanner . Click Custom Command to open the Custom Command page to set the commands in the Control Settings session. Please ...

  • Toshiba IK-WB80A - page 83

    83 2009/01/15 19:52:41 E-PTZ Operation If you select “Digital“, the e-PTZ control settings section will be displayed as shown below: Select Stream: Select one of the stream 1~3 to set up the e-PTZ control. Please note that each stream can be set up with its own e-preset positions and e-patrol settings. F or detailed information abouthow to set ...

  • Toshiba IK-WB80A - page 84

    84 1 Home page in E-PTZ Mode ■ The e-Preset Positions will also be displayed on the home page. Select one from the drop- down list, and the Network Camera will move to the selected e-preset position. ■ If you have set up dif ferent e-preset positions for stream 1~3, you can select one of the video streams to display its separate e-preset positi ...

  • Toshiba IK-WB80A - page 85

    85 Homepage Layout Advanced Mode This section explains how to set up your own customized homepage layout. Preview This column shows the settings of your hompage layout. Y ou can manually select the background and font colors in Theme Options (the third column on this page). The settings will be displayed automatically in this Preview eld. The fo ...

  • Toshiba IK-WB80A - page 86

    86 Theme Options Here you can change the color of your homepage layout. There are three types of preset patterns for you to choose from. The new layout will simultaneously appear in the Preview led. Click Save to enable the settings. Font Color of the Video Title Font Color Background Color of the Control Area Font Color of the Configuration Are ...

  • Toshiba IK-WB80A - page 87

    87 ■ Follow the steps below to set up the customed homepage: 1. Click Custom on the left column. 2. Click the eld where you want to change the color on the right column. 3. The palette window will pop up as shown below . 4. Drag the slider bar and click on the left square to select a desired color . 5. The selected color will be displayed in t ...

  • Toshiba IK-WB80A - page 88

    88 Application Advanced Mode This section explains how to congure the Network Camera to responds to particular situations (event). A typical application is that when a motion is detected, the Network Camera sends buffered images to an FTP server or e-mail address as notications. Event Settings In the Event Settings column, click Add to open t ...

  • Toshiba IK-WB80A - page 89

    89 Event name: Enter a name for the event setting. Enable this event: Select this option to enable the event setting. Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher priority setting will be executed rst. De tec t n ext e vent a fte r s eco nds : En ter th e d ura tio n in se con ds t o p aus e ...

  • Toshiba IK-WB80A - page 90

    90 T rigger This is the cause or stimulus which denes when to trigger the Network Camera. The trigger source can be congured to use the Network Camera’s built-in motion detection mechanism or external digital input devices. There are several choices of trigger sources as shown below . Select the item to display the detailed conguration o ...

  • Toshiba IK-WB80A - page 91

    91 ■ Camera tampering detection This option allows the Network Camera to trigger when the camera detects that is is being tampered with. T o enable this function, you need to congure the T ampering Detection option rst. Please refer to page 77 for detailed information. Event Schedule Specify the period for the event. ■ Select the days of ...

  • Toshiba IK-WB80A - page 92

    92 T o set an event with recorded video or snapshots, it is necessary to congure the server and media settings so that the Network Camera will know what action to take (such as which server to send the media files to) when a trigger is activated. ■ Add Server / Add Media Click Add Server to configure Server Settings . For more information, ple ...

  • Toshiba IK-WB80A - page 93

    93 When completed, click Save to enable the settings and click Close to exit Event Settings page. The new event settings / server settings / media settings will appear in the event drop-down list on the Application page. Here is an example of the Application page with an event setting: When the Event Status is ON , once an event is triggered by mot ...

  • Toshiba IK-WB80A - page 94

    94 Server Settings Click Add Server on Event Settings page to open the Server Setting pag e. On this page, you can specify where the notication messages are sent when a trigger is activated. A total of 5 server settings can be congured. Server name: Enter a name for the server setting. Server T ype There are four choices of server types avail ...

  • Toshiba IK-WB80A - page 95

    95 FTP: Select to send the media les to an FTP server when a trigger is activated. ■ Server address: Enter the domain name or IP address of the FTP server . ■ Server port By default, the FTP server port is set to 21. It can also be assigned to another port number between 1025 and 65535. ■ User name: Enter the login name of the FTP account. ...

  • Toshiba IK-WB80A - page 96

    96 HTTP: Select to send the media les to an HTTP server when a trigger is activated. ■ URL: Enter the URL of the HTTP server . ■ User name: Enter the user name if necessary . ■ Password: Enter the password if necessary . T o verify if the HTTP settings are correctly congured, click T est . The result will be shown in a pop-up window as ...

  • Toshiba IK-WB80A - page 97

    97 Media Settings Click Add Media on the Event Settings page to open the Media Settings page. On this page, you can specify the type of media that will be sent when a trigger is activated. A total of 5 media settings can be congured. Media name: Enter a name for the media setting. Media T ype There are three choices of media types available: Sna ...

  • Toshiba IK-WB80A - page 98

    98 Video clip: Select to send video clips when a trigger is activated. ■ Source: The source of video clip, which will be identical to the time shift caching stream. For more information about time shift caching stream, please refer to page 62. ■ Pre-event recording The Network Camera has a buffer area; it temporarily holds data up to a certain ...

  • Toshiba IK-WB80A - page 99

    99 When completed, click Save to enable the settings and click Close to exit this page. The new media settings will appear on the Event Settings page. Y ou can continue to select a server and media type for the event. Please go back to page 92 for detailed information. ■ SD T est: Click to test your SD card. The system will display a message indi ...

  • Toshiba IK-WB80A - page 100

    100 The following is an example of a le destination with video clips: Click 201001 15 to open the directory: 20100115 20100116 20100117 Click to delete s elected ite ms Click to delete all recorded data The format is: YYYYMMDD Click to open the directory Click to delete selected items Click to delete all recorded data Click to go back to the pre ...

  • Toshiba IK-WB80A - page 101

    101 Recording Advanced Mode This section explains how to congure the recording settings for the Network Camera. Recording Settings ● Before setting up this page, please set up the Network Storage on the Server Settings page rst. ● Please remember to format your SD card when using for the rst time. Please refer to page 104 for detailed ...

  • Toshiba IK-WB80A - page 102

    102 If successful, you will receive a test.txt le on the network storage server . 3. Enter a server name. 4. Click Save to complete the settings and click Close to exit the page. Recording Settings Click Add to open the recording setting page. In this page, you can define the recording source, recording schedule and recording capacity . A total ...

  • Toshiba IK-WB80A - page 103

    103 Source: Select the recording source (stream 1 ~ 4). Recording Schedule: Specify the recording duration. ■ Select the days of the week. ■ Select the recording start and end times in 24-hr time format. Destination: Y ou can select the SD card or network storage that was set up for the recorded video les. Capacity: Y ou can choose either th ...

  • Toshiba IK-WB80A - page 104

    104 Local Storage Advanced Mode This section explains how to manage the local storage on the Network Camera. Here you can view SD card status, search for recorded les to playback, download, etc. SD Card Management SD card status: This column shows the status and reserved space of your SD card. Please remember to format the SD card when using for ...

  • Toshiba IK-WB80A - page 105

    105 SD card control ■ Enable cyclic storage: Check this item if you want to enable cyclic recording. When the maximum capacity is reached, the oldest le will be overwritten by the latest one. ■ Enable automatic disk cleanup: Check this item and enter the number of days you wish to retain a le. For example, if you enter “7 days”, the r ...

  • Toshiba IK-WB80A - page 106

    106 Search Results The following is an example of search results. There are four columns: T rigger time, Media type, Trigger type, and Locked. Click to sort the search results in either direction. View: Click on a search result which will highlight the selected item in purple as shown above. Click the View button and a media window will pop up to p ...

  • Toshiba IK-WB80A - page 107

    107 Download: Click on a search result to highlight the selected item in purple as shown above. Then click the Download button and a le download window will pop up for you to save the le. JPEGs to A VI: This functions only applies to “JPEG“ format files such as snapshots. Y ou can select several snapshots from the list, then click this bu ...

  • Toshiba IK-WB80A - page 108

    108 System Log Advanced Mode This section explains how to configure the Network Camera to send the system log to the remote server as backup. Remote Log Y ou can congure the Network Camera to send the system log le to a remote server as a log message. When using this feature, the appropriate syslog server is required for receiving the system ...

  • Toshiba IK-WB80A - page 109

    109 Maintenance This chapter explains how to restore the Network Camera to factory default, upgrade rmware version, etc. Reboot This feature allows you to reboot the Network Camera, which takes about one minute to complete. When completed, the live video page will be displayed in your browser . Th e following message will be displayed during the ...

  • Toshiba IK-WB80A - page 110

    1 10 Export / Upload Files Advanced Mode This feature allows you to Export / Upload daylight saving time rules, custom language les, and setting backup les. Export daylight saving time conguration le: Click to set the start and end time of DST . Follow the steps below to export: 1. In the Export les column, click Export to export the ...

  • Toshiba IK-WB80A - page 111

    1 1 1 Upload daylight saving time rule: Click Browse… and specify the XML le to upload. If the incorrect date and time are assigned, you will see the following warning message when uploading the le to the Network Camera. The following message is displayed when attempting to upload an incorrect le format. Export setting backup le: Clic ...

  • Toshiba IK-WB80A - page 112

    1 12 The following message is displayed when the upgrade has succeeded. The following message is displayed when you have selected an incorrect rmware le. Starting firmware upgrade... Do not power down the server during the upgrade. The server will restart automatically after the upgrade is completed. This will take about 1 - 5 minutes. Wrong ...

  • Toshiba IK-WB80A - page 113

    1 13 T roubleshooting Reboot and restore If an operational problem occurred in the camera, please refer to the Reboot and Restore function on page 16. Audio When using multiple network cameras, restart Internet Explorer each time you switch the camera. Using the same Internet Explorer session for the multiple cameras may transmit multiple camera&ap ...

  • Toshiba IK-WB80A - page 114

    1 14 Specications Power supply 12V DC ± 10 %, 24V AC ± 10 %, PoE Consumption current 12V DC / 0.6 A, 24V AC / 0.6 A Image pickup device 1/3.2 inch (4:3), CMOS Digital Image Sensor Full resolution Horizontal 1600, vertical 1200 pixels Scanning system Progressive Lens Max. Aperture F=1:1.2 Focal length f= 3mm to 9mm Angle of view Wide end: horiz ...

  • Toshiba IK-WB80A - page 115

    1 15 *1: V aries in accordance with the object, image quality , network environment and performance of the personal computer used. *2: The sound may not be clear depending on the conditions of the lines. *3: When the camera is installed and operated in low temperatures below –10 °C {14 °F}, normal images may not be obtained immediately after st ...

  • Toshiba IK-WB80A - page 116

    1 16 3.72 (94.55) 12.4 (315.12) 8.36 (212.5) 9.52(242) 3.26 (83) 9.61 (244.16) Appearance Diagram Dimensions: inch (mm) ...

  • Toshiba IK-WB80A - page 117

    1 17 T echnology License Notice MPEG-4 AAC T echnology THIS PRODUCT IS LICENSED UNDER THE MPEG-4 AAC AUDIO P A TENT LICENSE. THIS PRODUCT MA Y NOT BE DECOMPILED, REVERSE-ENGINEERED OR COPIED, EXCEPT REGARD T O PC SOFTWARE, YOU MA Y MAKE SINGLE COPIES FOR ARCHIV AL PURPOSES.FOR MORE INFORMA TION, PLEASE REFER TO HTTP://WWW .VIALICENSING.COM. MPEG-4 ...

  • Toshiba IK-WB80A - page 118

    1 18 End-user License Agreement on Free Software Components Used in the T OSHIBA Network Camera GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor , Boston, MA 021 10-1301 USA Ev er yo ne i s p er mi tt ed t o co py a nd d is tr ib ut e ve rb at im co pi es o f t ...

  • Toshiba IK-WB80A - page 119

    1 19 having been made by running the Program). Whether that is true depends on what the Program does. 1. Y ou may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; k ...

  • Toshiba IK-WB80A - page 120

    120 c) Accompany it with the information you received as to the of fer to distribute corresponding source code. (This al ternative is allowed only for noncommerc ial distribution and only if you received the program in object code or executable form with such an offer , in accord with Subsection b above.) The source code for a work means the prefer ...

  • Toshiba IK-WB80A - page 121

    121 a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighte d interfaces, the original copyright holder w ho places the Program under ...

  • Toshiba IK-WB80A - page 122

    122 END OF TERMS AND CONDITIONS How to Apply These T erms to Y our New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. T o do so, attach the following notices to the program. ...

  • Toshiba IK-WB80A - page 123

    TOSHIBA AMERICA INFORMA TION SYSTEMS, INC. Surveillance & IP V ideo Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 ...

Manufacturer Toshiba Category Security Camera

Documents that we receive from a manufacturer of a Toshiba IK-WB80A can be divided into several groups. They are, among others:
- Toshiba technical drawings
- IK-WB80A manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba IK-WB80A
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba IK-WB80A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba IK-WB80A, service manual, brief instructions and user manuals Toshiba IK-WB80A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba IK-WB80A.

Similar manuals

A complete manual for the device Toshiba IK-WB80A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba IK-WB80A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba IK-WB80A.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba IK-WB80A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba IK-WB80A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba IK-WB80A, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba IK-WB80A - which should help us in our first steps of using Toshiba IK-WB80A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba IK-WB80A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba IK-WB80A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba IK-WB80A?

Use the form below

If you did not solve your problem by using a manual Toshiba IK-WB80A, ask a question using the form below. If a user had a similar problem with Toshiba IK-WB80A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)