English dropdown-ico

Manual Victory Refrigeration VM-2SL

42 pages 1.25 mb
Download

Go to site of 42

Summary
  • Victory Refrigeration VM-2SL - page 1

    MERCHANDISER MODELS VM-1, VM-2 & VM-2SL INST ALLA TION, OPERA TION & SER VICE MANUAL ★ ★ ★ ★ ★ ★ ★ ★ (For “Quick Navigation”, Click On T opics or Sections Highlighted In Blue) DESCRIPTION INS T ALL A TION OPER A TION MAINTENANCE SE R VICE TROUBLESHOOTING P ARTS LISTS WIRING DIAGRAMS ...

  • Victory Refrigeration VM-2SL - page 2

    W arranty (Continental USA Only) The Seller warrants to the original purchaser , equipment manufactured by Seller to be free from defect s in material and workmanship for which it is responsible. The Seller's obligation under this warranty shall be limited to replacing or repairing at Seller's option, without charge, F .O.B. Sellers facto ...

  • Victory Refrigeration VM-2SL - page 3

    RET AIN THIS MANUAL FOR FUTURE REFERENCE Machine Serial Number_______________________________ Installation Date_____________________________________ V ictory Refrigeration Service Hotline (800) 523-5008 iv NOTICE Victory (Manufacturer) reserves the right to change specifications at any time. IMPOR T ANT W arranty Registration Card Enclosed. Failure ...

  • Victory Refrigeration VM-2SL - page 4

    T ABLE OF CONTENTS Pages Section 1 - Description....................................................................................................... . ........................ 1 A. Control and Component Location........................................................................................... 2 B. Component Function..................... ...

  • Victory Refrigeration VM-2SL - page 5

    SECTION 1 DESCRIPTION Victory Merchandiser Refrigerators are Reach-In Models with full length glass swing doors on the front. There is also an optional full length sliding glass door assembly that is available for the two section model only . Victory Merchandiser One Section Model Figure 1-1 1 Section 1 - Description Section 1 - Description ...

  • Victory Refrigeration VM-2SL - page 6

    A. Control and Component Location Figure 1-2 Component Location B. Component Function 1. Doors - Swing doors are reversible for one (1) section only , and have adjustable self-closing features. a. Door Size - The doors are full length. b. Door T ype - The doors are sealed glass. c. Door Hinges - The doors consist of pin hinges. 2 1 3 4 5 2 Section ...

  • Victory Refrigeration VM-2SL - page 7

    2. Refrigeration System - The refrigeration system is self-contained and slides out for easy service. 3. Shelves - (Refer to Figure 1-2 and to the Parts List Section of this manual). a. Wire Shelves - Heavy-duty epoxy coated wire shelves are adjustable and can be angled downward for gravity- feed merchandising. 4. Cabinet - The cabinet exterior is ...

  • Victory Refrigeration VM-2SL - page 8

    VM-1 S tandard Features: ● ● NSF 7 Listed for Foodservice & Prepackaged Products ● Heavy Gauge Black Powder Coated Zinc Plated S teel Exterior ● High Impact Molded ABS Interior ● Bright White Interior with V ertical Fluorescent Lighting ● Fluorescent Lamp Replaceable without Removing Product or Shelving ● ● Automatic Condensatio ...

  • Victory Refrigeration VM-2SL - page 9

    VM - 2 & VM - 2SL S tandard Features: ● ● NSF 7 Listed for Foodservice & Prepackaged Products ● Heavy Gauge Black Powder Coated Zinc Plated S teel Exterior ● High Impact Molded ABS Interior ● Bright White Interior with V ertical Fluorescent Lighting ● ● Automatic Condensation Disposal ● CFC Free Refrigerant ● Full Height S ...

  • Victory Refrigeration VM-2SL - page 10

    SECTION 2 INST ALLA TION IMPORT ANT : It is highly recommended that your merchandiser refrigerator be installed by an authorized V ictory Certified Installer . A. Receiving Shipment Upon arrival, examine the exterior of the shipment packaging for any signs of rough handling. If the cabinet is damaged, it should be noted on the delivery slip or bill ...

  • Victory Refrigeration VM-2SL - page 11

    placed into it. T o estimate the possible product load weight it is generally conceded that a safe figure is 35 pounds for each net cubic foot storage space. For example, a 47 cubic foot cabinet could hold approximately 1645 pounds of product (47 x 35 = 1645). 2. V entilation - The air cooled, self-cont ained merchandiser refrigerator requires a su ...

  • Victory Refrigeration VM-2SL - page 12

    from the main supply to your merchandiser . It is most important that a volt age reading be made at the compressor-motor electrical connections, or as close to the compressor- motor as possible, while the merchandiser is in operation, to assure that the correct voltage required by the compressor is being supplied. Low or high voltage can detriment ...

  • Victory Refrigeration VM-2SL - page 13

    K. VM St andard Shelf Installation Instructions 9 Step 1 Step 2 Make sure plastic end caps are on the front left and right sides of the shelf before the installation process. *Note: Putting shelving in the cabinet without end caps will cause damage to the interior! T ilt shelf at an angle and insert into cabinet. Step 3 Insert the front shelf peg i ...

  • Victory Refrigeration VM-2SL - page 14

    K. VM St andard Shelf Installation Instructions (continued) 10 Step 5 Lift the inside shelf peg into the locking clip. Step 6 Shelf is installed. Attention!!!! Do not force the peg into the place. Doing this will damage the unit as previously stated. Section 2- Inst allation Section 2- Inst allation ...

  • Victory Refrigeration VM-2SL - page 15

    L. Assembling and Inst alling VM-2 & VM-2SL Beverage Organizer Shelf Victory organizer shelves have adjust able product dividers that allow for merchandising a variety of products without the need to purchase multiple unique fixed dividers. Before inst alling the dividers on the shelf, determine the required spacing for the product that will be ...

  • Victory Refrigeration VM-2SL - page 16

    L. Assembling and Inst alling VM-2 & VM-2SL Beverage Organizer Shelf (continued) Section 2- Inst allation Section 2- Inst allation Step 5 Hold the divider evenly . Grasp the divider above the back hook and gently snap the divider over the rear support rod on the shelf. Step 6 Make sure that the rear bar is seated within the hook snugly as shown ...

  • Victory Refrigeration VM-2SL - page 17

    SECTION 3 OPERA TION A. T emperature Control The temperature control should be set to maintain a temperature of 38°F (3.3°C) to 40°F (4.4°C). Note: Continued use of this equipment will allow you to become familiar with its operation and functions. Figure 3-1 Section 3 - Operation Section 3 - Operation “End Of Section, Click Here For T able Of ...

  • Victory Refrigeration VM-2SL - page 18

    SECTION 4 MAINTENANCE A. Cleaning and Proper Detergent Use Follow requirements of local health authorities. 1. Use a detergent-sanitizer or a mild detergent (neutral) or mildly alkaline (recommended for metal surfaces) followed by a sanitizing rinse solution. These chemicals are necessary to kill or deactivate the micro-organisms on the surface are ...

  • Victory Refrigeration VM-2SL - page 19

    1. Daily Exterior Surface Cleaning (continued) a. Dip sponge in cleaning solution, wipe down surfaces. b. Polish with clean soft cloth. Always wipe in direction of grain. Once a week a film cutting agent may be used for metal finishes to maint ain a shining surface. 2. W eekly Interior Accessory Cleaning Interior cleaning is recommended a minimum o ...

  • Victory Refrigeration VM-2SL - page 20

    4. Once Every Three Months, Condenser Maintenance Cleaning is recommended at least once every three (3) months. However , once a month is recommended when unit is located near cooking equipment which produces grease laden vapors, i.e.: fryers, grills, steam kettles, etc. a. Disconnect power by switching circuit breaker to “OFF” position. b. Rem ...

  • Victory Refrigeration VM-2SL - page 21

    SECTION 5 SER VICE A. Servicing the Refrigeration Condensing Unit The refrigeration condensing unit is serviceable from the front and rear of the merchandiser . 1. Discontinue power to merchandiser by turning arrow on temperature control knob to “one” (1) and unplugging power cord from electrical outlet at rear of cabinet. 2. Remove front grill ...

  • Victory Refrigeration VM-2SL - page 22

    B. Servicing Evaporator Fan Motors and T emperature Control (continued) b. VM-2 & VM-2SL Fan Panel/Drain Pan Disconnect (continued) ● Disconnect wiring one at a time on both sides of remaining ballast assembly . * Note: Be cautious!! At the same time individual wires are disconnected, mark wires for correct reinstallation! ● Place remaining ...

  • Victory Refrigeration VM-2SL - page 23

    C. Servicing Evaporator Coil and/or Heat Exchanger Assembly (continued) 5. After service to evaporator coil and/or heat exchanger assembly , reverse steps for reinstallation and proper restoration of power . *Note: If fan p anel/drain pan assembly was disconnected, make sure proper reinst allation procedures were used. Add more sealant to avoid lea ...

  • Victory Refrigeration VM-2SL - page 24

    D. VM-2SL Sliding Glass Door Shim Insertion Instructions If VM-2SL cabinet has gap(s) between the sliding glass door and frame, contact factory and request door roller assembly shim(s) under part number 05314501. Following are step by step guidelines that will assist in closing any gap(s). *Note: Pay close attention to roller assembly location and ...

  • Victory Refrigeration VM-2SL - page 25

    D. VM-2SL Sliding Glass Door Shim Insertion Instructions (continued) 1. If cabinet has gap(s) between sliding glass door and frame, place shim(s) as shown on page 19. 2. Remove door(s) from the frame by grasping firmly on both ends and lifting the door(s) up towards the top frame and pulling out towards you ( Fig.2 ). 3. T urn door(s) over and remo ...

  • Victory Refrigeration VM-2SL - page 26

    D. VM-2SL Sliding Glass Door Shim Insertion Instructions (continued) 4. T ake the roller assembly out of the door ( Fig.4 ). 5. Install necessary amount of shims over stud screws ( Fig.5 ). Examples: (1) One shim will resolve a 1/4” gap in between the door and frame; (2) T w o shims will resolve a 1/2” gap in between the door and frame. 6. Plac ...

  • Victory Refrigeration VM-2SL - page 27

    D. VM-2SL Sliding Glass Door Shim Insertion Instructions (continued) 7. Insert nuts with 1/4” nut driver ( Fig.7 ). 8. T urn door over after roller assembly is properly inst alled. Place top of door in top rail of frame by pushing tension spring block with door . ( Fig.8 & Fig.8a ). Push bottom of door in for complete installation. Figure 7 F ...

  • Victory Refrigeration VM-2SL - page 28

    SECTION 6 TROUBLESHOOTING 24 Section 6 - T roubleshooting Section 6 - T roubleshooting ...

  • Victory Refrigeration VM-2SL - page 29

    PROBLEM POSSIBLE CAUSE REMEDY 1. Condensing unit fails to start - no hum. 2. Condensing unit fails to start - hums, but trips on overload protector . 3. Condensing unit start s, but fails to switch off of “start” winding. 4. Condensing unit start s and runs, but short cycles on overload protector . 5. Condensing unit runs but short cycles on... ...

  • Victory Refrigeration VM-2SL - page 30

    7. St art capacitor open or shorted blown. 8. Run capacitor open, shorted or blown. 9. Relay defective or burned out. 10. Product zone temperature too high. 1 1. Suction line frosted or sweating. 12. Liquid line frosted or sweating. 13. Noisy condensing unit. 1. Relay contact s not opening properly . 2. Prolonged operation on start cycle due to: a. ...

  • Victory Refrigeration VM-2SL - page 31

    SECTION 7 P ARTS LIST 27 Section 7 - Part s List Section 7 - Part s List ...

  • Victory Refrigeration VM-2SL - page 32

    Victory Merchandiser One Section Cabinet & Hinged Glass Door Part s 28 Section 7 - Part s List Section 7 - Part s List ...

  • Victory Refrigeration VM-2SL - page 33

    Victory Merchandiser One Section Cabinet & Hinged Glass Door Part s List (Refer to drawing on p age 28) Item Description Part Numbers Qty 1 Light Rod Reflector 04459801 1 2 Light Rod 04459701 1 3 Upper Hinge Bracket 50841201 1 4 Rear Joint Cover 01375301 1 5 Lower Back Panel 01375701 1 6 Lower Case End 01375801 2 7 Plastic Grille 50798405 1 8 A ...

  • Victory Refrigeration VM-2SL - page 34

    Victory Merchandiser T wo Section Cabinet & Hinged Glass Door Part s 30 Section 7 - Part s List Section 7 - Part s List ...

  • Victory Refrigeration VM-2SL - page 35

    Victory Merchandiser T wo Section Cabinet & Hinged Glass Door Part s List (Refer to drawing on p age 30) Item Description Part Numbers Qty 1 Light Rod Reflector 04460301 1 2 Light Rod 04460401 1 3 N/A -- 4 Rear Joint Cover 01375301 2 5 Lower Back Panel 01376301 1 6 Lower Case End 01375801 1 7 Lower Case End Screws 50316701 4 8 Plastic Grille 50 ...

  • Victory Refrigeration VM-2SL - page 36

    Victory Merchandiser One Section Cabinet Refrigeration Component s 32 Section 7 - Part s List Section 7 - Part s List ...

  • Victory Refrigeration VM-2SL - page 37

    Victory Merchandiser One Section Refrigerator Component s Parts List (Refer to drawing on p age 32) *Note: Electrical wiring harness components within this p arts list pertains to cabinets manufactured on o r a f t e r June 12th, 2001! For cabinets built prior to this date, consult factory . Item Description Part Numbers Qty 1 T emperature Control ...

  • Victory Refrigeration VM-2SL - page 38

    Victory Merchandiser T wo Section Cabinet Refrigeration Component s 34 Section 7 - Part s List Section 7 - Part s List ...

  • Victory Refrigeration VM-2SL - page 39

    Victory Merchandiser T wo Section Refrigerator Component s Part s List (Refer to drawing on p age 34) *Note: Electrical wiring harness components within this p arts list pertains to cabinets manufactured on o r a f t e r June 12th, 2001! For cabinets built prior to this date, consult factory . Item Description Part Numbers Qty 1 T emperature Contro ...

  • Victory Refrigeration VM-2SL - page 40

    SECTION 8 WIRING DIAGRAM 36 Section 8 - Wiring Diagram Section 8 - Wiring Diagram ...

  • Victory Refrigeration VM-2SL - page 41

    VM-1, VM-2 & VM-2SL (Self-Cont ained) 1 15v/60Hz/1ph Section 8 - Wiring Diagram Section 8 - Wiring Diagram “End Of Section, Click Here For T able Of Conten t s” ...

  • Victory Refrigeration VM-2SL - page 42

    VICT OR Y REFRIGERA TION 1 10 Woodcrest Road Cherry Hill, NJ 08003 Phone (856) 428-4200 Fax (856) 428-7299 W ebsite: ww w .victory-refrig.com E-Mail: p ar t s@victory-refrig.com p ar t s.order-entry@victory-refrig.com or service@victory-refrig.com Manual Part Number: 50843901 Rev: 02 Print Date: 08/13/01 Price: $15.00 W ebsite: ww w .agafoodservice ...

Manufacturer Victory Refrigeration Category Refrigerator

Documents that we receive from a manufacturer of a Victory Refrigeration VM-2SL can be divided into several groups. They are, among others:
- Victory Refrigeration technical drawings
- VM-2SL manuals
- Victory Refrigeration product data sheets
- information booklets
- or energy labels Victory Refrigeration VM-2SL
All of them are important, but the most important information from the point of view of use of the device are in the user manual Victory Refrigeration VM-2SL.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Victory Refrigeration VM-2SL, service manual, brief instructions and user manuals Victory Refrigeration VM-2SL. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Victory Refrigeration VM-2SL.

Similar manuals

A complete manual for the device Victory Refrigeration VM-2SL, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Victory Refrigeration VM-2SL by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Victory Refrigeration VM-2SL.

A complete Victory Refrigeration manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Victory Refrigeration VM-2SL - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Victory Refrigeration VM-2SL, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Victory Refrigeration VM-2SL, that we can find in the current document
3. Tips how to use the basic functions of the device Victory Refrigeration VM-2SL - which should help us in our first steps of using Victory Refrigeration VM-2SL
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Victory Refrigeration VM-2SL
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Victory Refrigeration VM-2SL in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Victory Refrigeration VM-2SL?

Use the form below

If you did not solve your problem by using a manual Victory Refrigeration VM-2SL, ask a question using the form below. If a user had a similar problem with Victory Refrigeration VM-2SL it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)