English dropdown-ico

Manual Juniper Networks T1600

113 pages 2.07 mb
Download

Go to site of 113

Summary
  • Juniper Networks T1600 - page 1

    T1600 Internet Routing Node PIC Guide Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, California 94089 USA 408-745-2000 www.juniper.net Part Number: 530-024403-01, Revision 1 ...

  • Juniper Networks T1600 - page 2

    This guide provides an overview and description of the Physical Interface Cards (PICs) supported by the Juniper Networks T1600 Internet routing node. The PICs are described alphabetically. Table 1 on page 3 lists the PICs supported by the T1600 Internet routing node by PIC family. PICs provide the physical connection to various network media types. ...

  • Juniper Networks T1600 - page 3

    Table 1: PICs Supported in the T1600 Internet Routing Node Page First JUNOS Support Ports PIC Family and Type ATM2 IQ 18 8.5 4 ATM2 E3 IQ 20 8.5 2 ATM2 OC3/STM1 IQ 23 8.5 2 ATM2 OC12/STM4 IQ 23 8.5 1 ATM2 OC12/STM4 IQ 26 8.5 1 ATM2 OC48/STM16 IQ with SFP Channelized IQ 29 8.5 4 Channelized DS3 IQ 31 8.5 1 Channelized OC3 IQ 34 8.5 1 Channelized OC1 ...

  • Juniper Networks T1600 - page 4

    Table 1: PICs Supported in the T1600 Internet Routing Node (continued) Page First JUNOS Support Ports PIC Family and Type 47 8.5 2 Gigabit Ethernet IQ Ethernet IQ2 50 8.5 4 Gigabit Ethernet IQ2 50 8.5 8 Gigabit Ethernet IQ2 50 8.5 8 Gigabit Ethernet IQ2 54 8.5 1 10-Gigabit Ethernet IQ2 Services 12 8.5 0 Adaptive Services II 15 8.5 0 Adaptive Servic ...

  • Juniper Networks T1600 - page 5

    Table 1: PICs Supported in the T1600 Internet Routing Node (continued) Page First JUNOS Support Ports PIC Family and Type 98 8.5 1 SONET/SDH OC192c/STM64 102 8.5 1 SONET/SDH OC192c/STM64 with XFP 102 8.5 4 SONET/SDH OC192c/STM64 with XFP 106 8.5 1 SONET/SDH OC768c/STM256 ■ 5 ...

  • Juniper Networks T1600 - page 6

    FPCs Supported T1600 routing nodes support the FPCs listed in Table 2 on page 6. Table 2: FPCs Supported by the T1600 Routing Node First JUNOS Release Maximum Throughput per FPC Maximum Number of PICs FPC Model Number FPC Name FPC Type 6.3 4 Gbps 4 T640-FPC1-E Enhanced FPC1 1 7.4 4 Gbps 4 T640-FPC1-E2 Enhanced II FPC1 1 5.3 16 Gbps 4 T640-FPC2 FPC2 ...

  • Juniper Networks T1600 - page 7

    PIC/FPC Compatibility Table 3 on page 7 through Table 12 on page 11 provide PIC/FPC compatibility matrices for the current PICs for T1600 routing nodes. The table lists the first JUNOS release in which the FPC supports the PIC. For example, JUNOS 8.5 is the first release in which the T640-FPC1-E2 supports the ATM2 OC3/STM1 IQ, 2-port PIC. Table 3: ...

  • Juniper Networks T1600 - page 8

    Table 6: T1600 Ethernet PIC/FPC Compatibility (continued) Gigabit Ethernet, 10-port SFP Gigabit Ethernet, 4-port SFP Gigabit Ethernet, 2-port SFP Gigabit Ethernet, 1-port SFP Fast Ethernet, 4-port FPC – 8.5 8.5 – – T640-FPC2-E – 8.5 8.5 – – T640-FPC2-E2 8.5 – – – – T640-FPC3 8.5 – – – – T640-FPC3-E 8.5 – – – – T6 ...

  • Juniper Networks T1600 - page 9

    Table 8: T1600 Ethernet IQ PIC/FPC Compatibility Gigabit Ethernet IQ2, 8-port SFP Gigabit Ethernet IQ2, 4-port SFP Gigabit Ethernet IQ, 2-port SFP Gigabit Ethernet IQ, 1-port SFP FPC – 8.5 – 8.5 T640-FPC1-E – 8.5 – 8.5 T640-FPC1-E2 – – 8.5 – T640-FPC2 8.5 – 8.5 – T640-FPC2-E 8.5 – 8.5 – T640-FPC2-E2 Table 9: T1600 Ethernet IQ2 ...

  • Juniper Networks T1600 - page 10

    Table 10: T1600 Services PIC/FPC Compatibility (continued) 40-Gigabit Tunnel Services Tunnel Services MultiServices Monitoring Services III Monitoring Services II Adaptive Services II Layer 2 Services Adaptive Services II (AS) FPC – 8.5 – 8.5 8.5 – – T640- FPC2 – 8.5 MultiServices 400: 8.5 8.5 8.5 – – T640- FPC2-E – 8.5 MultiService ...

  • Juniper Networks T1600 - page 11

    Table 11: T1600 SONET/SDH PIC/FPC Compatibility (continued) OC768c/ STM256, 1-port OC192c / STM64, 4-port XFP OC192c / STM64, 1-port XFP OC192c / STM64, 1-port OC48c/ STM16, 4-port SFP OC48c/ STM16, 1-port SFP OC12c/ STM4, 4-port OC12c/ STM4, 1-port OC3c/ STM1, 4-port FPC – – – 8.5 8.5 – – – – T640- FPC3 – – 8.5 8.5 8.5 – – ? ...

  • Juniper Networks T1600 - page 12

    Adaptive Services II PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Supports tunnel services. This feature is included with the PIC and does not require an individual license. ■ Individual licenses must be purchased for additional services. ■ Power requirement: 0.4 A @ 48 V (19 W) Description ■ Support for up to 2000 service sets ? ...

  • Juniper Networks T1600 - page 13

    Table 13: Adaptive Services PICs Software Features Adaptive Services II Layer 2 Services PIC Adaptive Services II PIC Software Feature – – GRE Key – – GRE dont-fragment – 8.5 Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks – 8.5 Network Address Translation (NAT) for IP addres ...

  • Juniper Networks T1600 - page 14

    Table 13: Adaptive Services PICs Software Features (continued) 8.5 8.5 Encapsulations ■ Multilink Frame Relay (MLFR) ■ Multilink Point-to-Point Protocol (MLPP) 14 ■ Adaptive Services II PIC T1600 Internet Routing Node PIC Guide ...

  • Juniper Networks T1600 - page 15

    Adaptive Services II Layer 2 Services PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Supports Layer 2 Service package only. Tunnel services are included with the PIC. Other services require an individual license. ■ Power requirement: 0.4 A @ 48 V (19 W) Description ■ Support for up to 2000 service sets ■ Support for MTUs up to 9192 ...

  • Juniper Networks T1600 - page 16

    Table 14: Adaptive Services PICs Software Features Adaptive Services II Layer 2 Services PIC Adaptive Services II PIC Software Feature – – GRE Key – – GRE dont-fragment – 8.5 Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks – 8.5 Network Address Translation (NAT) for IP addres ...

  • Juniper Networks T1600 - page 17

    Table 14: Adaptive Services PICs Software Features (continued) 8.5 8.5 Encapsulations ■ Multilink Frame Relay (MLFR) ■ Multilink Point-to-Point Protocol (MLPP) Adaptive Services II Layer 2 Services PIC ■ 17 Adaptive Services II Layer 2 Services PIC ...

  • Juniper Networks T1600 - page 18

    ATM2 E3 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Four E3 ports ■ Power requirement: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ ATM standards compliant Description ■ 16-MB SDRAM memory for ATM segmentation and reassembly (SAR) ■ ATM switch ID ■ Configurabl ...

  • Juniper Networks T1600 - page 19

    ■ Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping ■ Unspecified bit rate (UBR) traffic shaping ■ Fine-grained variable bit rate (VBR) traffic shaping ■ Circuit cross-connect (CCC) ■ ATM Inverse Address Resolution Protocol (ARP), which enables routers to automatically learn the IP address of the router on the far end of ...

  • Juniper Networks T1600 - page 20

    ATM2 OC3/STM1 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Two OC3 ports ■ Power requirement: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 ■ ATM and SONET/SDH standards compliant ■ Alarm and event counting and dete ...

  • Juniper Networks T1600 - page 21

    ■ Circuit cross-connect (CCC) for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indicator (RDI) cells, and loop cells ■ Point-to-point and point-to-mu ...

  • Juniper Networks T1600 - page 22

    Table 15: Optical Interface Support for ATM2 OC3 IQ PICs (continued) Multimode Intermediate Reach (IR) Parameter Multivendor agreement Telcordia GR-253 Standard 1.2 miles/2 km 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1260 through 1360 nm Transmitter wavelength – 20 through – 14 dBm – 15 through – 8 dBm Average launch power – ...

  • Juniper Networks T1600 - page 23

    ATM2 OC12/STM4 IQ PICs Left: 1-port ATM2 OC12/STM4 IQ PIC; Right: 2-port ATM2 OC12/STM4 IQ PIC ■ 1-port: JUNOS 8.5 and later (Type 1) ■ 2-port: JUNOS 8.5 and later (Type 2) Software release ■ One or two OC12 ports ■ Power requirement: 0.52 A @ 48 V (25 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ? ...

  • Juniper Networks T1600 - page 24

    ■ Circuit cross-connect for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM fault management processes alarm indication signal (AIS), remote defect indication (RDI), and loop cells ■ Point-to-point and point-to-multipoint mo ...

  • Juniper Networks T1600 - page 25

    Table 16: Optical Interface Support for ATM2 OC12/STM4 IQ PICs (continued) Multimode Transceiver Intermediate Reach (IR) Transceiver Parameter Multivendor agreement Telcordia GR-253 Standard 546.8 yards/500 m 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Transmitter wavelength – 20 through – 14 dBm – 15 through ? ...

  • Juniper Networks T1600 - page 26

    ATM2 OC48/STM16 IQ PIC with SFP ■ JUNOS 8.5 and later (Type 2) Software release ■ One OC48 port ■ Power requirements: 0.41 A @ 48 V (20 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1 ■ ATM and SONET/SDH standards compliant ■ Alarm and event count ...

  • Juniper Networks T1600 - page 27

    ■ Multiprotocol Label Switching (MPLS) circuit cross-connect for leveraging ATM access networks ■ User-configurable virtual circuit (VC) and virtual path (VP) support ■ Support for idle cell or unassigned cell transmission ■ OAM Fault Management processes Alarm Indication Signal (AIS), Remote Defect Indicator (RDI), and loop cells ■ Point ...

  • Juniper Networks T1600 - page 28

    Table 17: Optical Interface Support for ATM2 OC48/STM16 IQ PICs (continued) Multimode Intermediate Reach (IR) Optical Parameter SFP SFP Transceiver type Multivendor agreement Telcordia GR-253 Standard 546.8 yards/500 m 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Wavelength – 20 through – 14 dBm – 15 through – ...

  • Juniper Networks T1600 - page 29

    Channelized DS3 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Four DS3 ports ■ Power requirement: 0.32 A @ 48 V (15.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: DS3, DS0 Description ■ Data service unit (DSU) functionality ■ Subrate and scrambling: ■ Digital Link ...

  • Juniper Networks T1600 - page 30

    ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB ■ Dynamic, arbitrary channel configuration ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect ...

  • Juniper Networks T1600 - page 31

    Channelized OC3 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ One OC3 port ■ Power requirement: 0.39 A @ 48 V (18.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: DS3, DS1, DS0 Description ■ Subrate and scrambling: ■ Digital Link/Quick Eagle ■ Kentrox ■ Larscom ? ...

  • Juniper Networks T1600 - page 32

    ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB ■ Dynamic, arbitrary channel configuration ■ Full bit error rate test (BERT) ■ Encapsulations: ■ High-Level Data Link Control (HDLC ...

  • Juniper Networks T1600 - page 33

    Table 18: Optical Interface Support for Channelized OC3 IQ PICs (continued) Intermediate Reach (IR) SFP Transceiver Optical Parameter 1274 through 1356 nm Wavelength – 15 through – 8 dBm Average launch power – 8 dBm Receiver saturation – 28 dBm Receiver sensitivity Channelized OC3 IQ PIC ■ 33 Channelized OC3 IQ PIC ...

  • Juniper Networks T1600 - page 34

    Channelized OC12 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ One OC12 port ■ Power requirement: 0.23 A @ 48 V (10.8 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: OC3, DS3, DS1, DS0 Description ■ Subrate and scrambling: ■ Digital Link/Quick Eagle ■ Kentrox ■ Lar ...

  • Juniper Networks T1600 - page 35

    ■ Duplex SC/PC connector (Rx and Tx); single-mode fiber ■ Optical interface support — See Table 19 on page 35 Cables and connectors One tricolor per port: ■ Off — Not enabled ■ Green — Online with no alarms or failures ■ Amber — Online with alarms for remote failures ■ Red — Active with a local alarm; router has detected a fai ...

  • Juniper Networks T1600 - page 36

    Channelized STM1 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ One STM1 port ■ Power requirement: 0.39 A @ 48 V (18.6 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface ■ Channelization: STM1c, fractional E1, framed and unframed DS0 Description ■ Packet buffering, Layer 2 parsing ■ Local a ...

  • Juniper Networks T1600 - page 37

    ■ Alarm indication signal (AIS-L, AIS-P) ■ Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF) ■ Bit interleaved parity errors B1, B2, B3 (CV-S, CV-L, CV-P) ■ Errored seconds (ES-S, ES-L, ES-P), far-end bit errors REI-L, REI-P (CV-LFE, CV-PFE), far-end errored seconds (ES-LFE, ES-PFE), far-end severely errored seco ...

  • Juniper Networks T1600 - page 38

    DS3 PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Four DS3 ports ■ Power requirement: 0.47 A @ 48 V (22.5 W) ■ Integrated DSU interoperability with leading DSU vendors Description ■ High-performance throughput on each port at speeds up to 44.736 Mbps, full duplex ■ C-bit framing ■ B3ZS line encoding ■ Subrate and scrambling: ...

  • Juniper Networks T1600 - page 39

    ■ Custom 10-ft (3.05-m) posilock SMB to BNC male cable, separate Rx and Tx (provided) Cables and connectors One tricolor per port: ■ Off — Not enabled ■ Green — Online with no alarms or failures ■ Amber — Online with alarms for remote failures ■ Red — Active with a local alarm; router has detected a failure LEDs ■ Alarm indicati ...

  • Juniper Networks T1600 - page 40

    E3 IQ PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Four E3 ports ■ Power requirement: 0.38 A @ 48 V (18 W) ■ Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface Description ■ Clear-channel (34.368-Mbps) and subrate E3 ■ Unframed or ITU G.751 framing ■ Data service unit (DSU) functionality ■ Subr ...

  • Juniper Networks T1600 - page 41

    ■ Quality of service (QoS) per port: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB ■ Input policing and output shaping ■ Provider-side rate limiting ■ Full data link connection identifier (DLCI) range with sparse channel numberi ...

  • Juniper Networks T1600 - page 42

    Fast Ethernet PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ 4 100Base-TX ports ■ Power requirement: 0.14 A @ 48 V (6.8 W) Description ■ High-performance throughput on each port at speeds up to 100 Mbps ■ Source and destination Media Access Control (MAC) address filtering ■ RMON EtherStats packet buffering ■ 802.3 Ethernet stan ...

  • Juniper Networks T1600 - page 43

    Status LED, one bicolor: ■ Off — PIC ports not enabled ■ Green — PIC is operating normally ■ Red — PIC has an error or failure 4-port PIC — One pair of port LEDs: ■ Link LED — If green, the port is online; if there is no light, the port is down ■ RX LED — If flashing green, the port is receiving data; if there is no light, the ...

  • Juniper Networks T1600 - page 44

    Gigabit Ethernet PICs with SFP Left: 1-port Gigabit Ethernet PIC; Right: 2-port Gigabit Ethernet PIC Left: 4-port Gigabit Ethernet PIC; Right: 8-port Gigabit Ethernet PIC 44 ■ Gigabit Ethernet PICs with SFP T1600 Internet Routing Node PIC Guide ...

  • Juniper Networks T1600 - page 45

    Software release ■ 1-port: JUNOS 8.5 and later (Type 1) ■ 2-port: JUNOS 8.5 and later (Type 2) ■ 4-port: JUNOS 8.5 and later (Type 2) ■ 10-port: JUNOS 8.5 and later (Type 3) ■ One, two, four, or ten Gigabit Ethernet ports ■ Power requirement: ■ 1-port: 0.25 A @ 48 V (11.9 W) ■ 2-port: 0.25 A @ 48 V (11.9 W) ■ 4-port: 0.50 A @ 48 V ...

  • Juniper Networks T1600 - page 46

    ■ You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Fiber-optic SFP transceivers: ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — See Table 20 on page 46 ■ 1000Base-T SFP transceivers: ■ Connecto ...

  • Juniper Networks T1600 - page 47

    Gigabit Ethernet IQ PICs with SFP Left: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC ■ 1-port: JUNOS 8.5 and later (Type 1) ■ 2-port: JUNOS 8.5 and later (Type 2): Software release ■ One or two Gigabit Ethernet ports ■ Power requirement: 0.46 A @ 48 V (22 W) ■ Intelligent queuing (IQ) PICs support fine-grained que ...

  • Juniper Networks T1600 - page 48

    ■ You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Fiber-optic SFP transceivers: ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — see Table 21 on page 48 ■ 1000Base-T SFP transceivers: ■ Connecto ...

  • Juniper Networks T1600 - page 49

    Table 21: Optical Interface Support for Gigabit Ethernet IQ PICs with SFP (continued) 1000Base-LH 1000Base-LX 1000Base-SX Parameter – 20 through – 3 dBm – 19 through – 3 dBm – 17 through 0 dBm Average receive power – 3 dBm – 3 dBm 0 dBm Receiver saturation – 20 dBm – 19 dBm – 17dBm Receiver sensitivity Gigabit Ethernet IQ PICs w ...

  • Juniper Networks T1600 - page 50

    Gigabit Ethernet IQ2 PICs with SFP Left: 1-port Gigabit Ethernet IQ2 PIC (Type 1); Right: 8-port Gigabit Ethernet IQ2 PIC (Type 2) 50 ■ Gigabit Ethernet IQ2 PICs with SFP T1600 Internet Routing Node PIC Guide ...

  • Juniper Networks T1600 - page 51

    g002378 Center: 10-port Gigabit Ethernet IQ2 PIC (Type 3) ■ 4-port: JUNOS 8.5 and later (Type 1) ■ 8-port: JUNOS 8.5 and later (Type 2) ■ 8-port: JUNOS 8.5 and later (Type 3) Software release ■ Four or eight Gigabit Ethernet ports ■ Power requirement: ■ 4-port: 0.65 A @ 48 V (31 W) ■ 8-port (Type 2): 0.89 A @ 48 V (42.5 W) ■ 8-port ...

  • Juniper Networks T1600 - page 52

    ■ Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs ■ Optical diagnostics and related alarms ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Virtual Router Redundancy Protocol (VRRP) support ■ Hierarchical shaping ■ Fine-gr ...

  • Juniper Networks T1600 - page 53

    Table 22: Optical Interface Support for Gigabit Ethernet IQ2 PICs with SFP 1000Base-LH 1000Base-LX 1000Base-SX Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type Multivendor agreement IEEE 802.3 — 1998 IEEE 802.3 — 1998 Standard 9/125 SMF cable: 43.5 miles/70 km 9/125 SMF cable: 6.2 miles/10 km 62.5/125 o ...

  • Juniper Networks T1600 - page 54

    10-Gigabit Ethernet IQ2 PIC with XFP ■ JUNOS 8.5 and later (Type 3) Software release ■ One 10-Gigabit Ethernet port ■ Power requirements: 1.2 A @48 V (56 W) Description ■ High-performance throughput ■ WAN-PHY mode at 9.953 Gbps ■ LAN-PHY mode at 10.3125 Gbps ■ Full-duplex mode ■ Large maximum transmission units (MTUs) of up to 9192 ...

  • Juniper Networks T1600 - page 55

    ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Configurable WAN-PHY mode options: ■ loopback ■ mpls ■ path-trace ■ trigger ■ Virtual Router Redundancy Protocol (VRRP) support ■ Hierarchical shaping ■ Fine-grained queueing and shaping per lo ...

  • Juniper Networks T1600 - page 56

    Table 23: Optical Interface for 10-Gigabit Ethernet IQ2 PICs 10-GBase-Z 10-GBase-E 10-GBase-L 10-GBase-S Parameter XFP-10G-Z-OC192-LR2 XFP-10G-E-OC192-IR2 XFP-10G-L-OC192-SR1 XFP-10G-S Transceiver model number Single-mode Single-mode Single-mode Multimode Optical interface XFP XFP XFP XFP Transceiver type Multivendor agreement IEEE 802.3ae — 2002 ...

  • Juniper Networks T1600 - page 57

    10-Gigabit Ethernet PIC with XENPAK ■ JUNOS 8.5 and later (Type 3): 10GBase-ER, 10GBase-LR, 10GBase-SR, and 10GBase-ZR transceivers ■ JUNOS 9.0R2 and later (Type 3): XENPAK-OTN transceivers Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 W) ■ Supports large Ethernet frame sizes for more efficient t ...

  • Juniper Networks T1600 - page 58

    ■ Duplex SC/PC connector (RX and TX) ■ Optical interface support — See Table 24 on page 58 and Table 25 on page 59 Cables and connectors Status LED, one bicolor: ■ Off — PIC not enabled ■ Green — PIC is operating normally ■ Red — PIC has an error or failure Port LEDs, one pair: ■ Link — If green, the port is online; if there i ...

  • Juniper Networks T1600 - page 59

    Table 24: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK (continued) Extra-Long Wavelength Serial (10GBase-ZR), LAN Rate Extra-Long Wavelength Serial (10GBase-ER), LAN Rate Long Wavelength Serial (10GBase-LR), LAN Rate Short Wavelength Serial (10GBase-SR), LAN Rate Parameter – 24.0 through – 7.0 dBm – 15.8 through – 1.0 ...

  • Juniper Networks T1600 - page 60

    Table 25: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK-OTNs (continued) ■ Transmitter type: Electro-absorption Modulated Laser (EML) ■ Modulation format: Non-retum-to-zero (NRZ) ■ Channel-plan wavelength range: 1551.72 through 1542.94 nm ■ Channel-plan frequency range: 193.2 through 194.3 THz ■ Channel spacing: 100 G ...

  • Juniper Networks T1600 - page 61

    Table 26: XENPAK-OTN Optical Signal-to-Noise Ratio (OSNR) Performance (continued) CD Tolerance (ps/nm) Input-Power Range (dBm) Post-FEC BER Pre-FEC BER FEC Type OSNR (dB/0.5 nm) OSNR (dB/0.1 nm) – 400 to +800 – 8 to – 20 10 – 15 10 – 5 GFEC 10 17 – 600 to +1200 – 8 to – 20 10 – 15 10 – 5 GFEC 11 18 – 700 to +1500 – 8 to – ...

  • Juniper Networks T1600 - page 62

    10-Gigabit Ethernet LAN/WAN PIC with XFP ■ JUNOS 9.0 and later (Type 4) Software release ■ Four 10-Gigabit Ethernet ports ■ Power requirements: 0.9 A @48 V (43 W) Description ■ High-performance throughput ■ WAN-PHY mode at 9.953 Gbps ■ LAN-PHY mode at 10.3125 Gbps ■ Full-duplex mode ■ Large maximum transmission units (MTUs) of up to ...

  • Juniper Networks T1600 - page 63

    ■ Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED) ■ Configurable WAN-PHY mode options: ■ loopback ■ mpls ■ path-trace ■ trigger ■ Flexible Ethernet Services Encapsulation ■ 802.1q virtual LANs (VLANs) ■ Ethernet OAM 802.1ag continuity check ■ ...

  • Juniper Networks T1600 - page 64

    Table 28: Optical Interface for 10-Gigabit Ethernet LAN/WAN PICs 10-GBase-Z 10-GBase-E 10-GBase-L 10-GBase-S Parameter XFP-10G-Z-OC192-LR2 XFP-10G-E-OC192-IR2 XFP-10G-L-OC192-SR1 XFP-10G-S Transceiver model number Single-mode Single-mode Single-mode Multimode Optical interface XFP XFP XFP XFP Transceiver type Multivendor agreement IEEE 802.3ae — ...

  • Juniper Networks T1600 - page 65

    10-Gigabit Ethernet DWDM PIC ■ JUNOS 8.5 and later (Type 3) Software release ■ One 10-Gigabit Ethernet port ■ Power requirement: 0.55 A @ 48 V (26.6 W) ■ Supports large Ethernet frame sizes for more efficient throughput across the intra-POP network Description ■ C-band ITU-Grid with 100 GHz spacing ■ High-performance throughput at speed ...

  • Juniper Networks T1600 - page 66

    ■ Duplex SC/PC connector (RX and TX) Cables and connectors Status LED, one bicolor: ■ Off — PIC is not enabled ■ Green — PIC is operating normally ■ Red — PIC has an error or failure Port LEDs, one pair: ■ Link — If green, the port is online; if there is no light, the port is down ■ RX — If flashing green, the port is receivin ...

  • Juniper Networks T1600 - page 67

    Monitoring Services II PIC ■ JUNOS 8.5 and later (Type 1) Software release ■ Passive traffic monitoring or flow collection services ■ Power requirement: 0.4 A @ 48 V (19 W) ■ Monitors IPv4 packets ■ Support for collecting and exporting cflowd records Description ■ Monitors up to 400,000 packets per second ■ Support for MTUs up to 4474 ...

  • Juniper Networks T1600 - page 68

    Status LED, one tricolor: ■ Off — PIC is offline and it is safe to remove it from the chassis. ■ Green — PIC is operating normally. ■ Amber — PIC is initializing. ■ Red — PIC has an error or failure and no further harm can be done by removing it from the chassis. Application LED, one bicolor: ■ Off — Flow collector is not runnin ...

  • Juniper Networks T1600 - page 69

    Monitoring Services III PIC ■ JUNOS 8.5 and later (Type 2) Software release ■ Power requirement: 0.4 A @ 48 V (19 W) ■ Supports dynamic flow capture ■ 2 Gbps of sustained packet bandwidth Description ■ Supports MTUs up to 4474 bytes for SONET interfaces Hardware features For more information about the software features for services PICs, ...

  • Juniper Networks T1600 - page 70

    Two Status LEDs: PIC and APP PIC LED, one tricolor: ■ Off — PIC is offline and it is safe to remove it from the chassis. ■ Green — PIC is operating normally. ■ Amber — PIC is initializing. ■ Red — PIC has an error or failure and no further harm can be done by removing it from the chassis. Application LED, one tricolor: ■ Off — M ...

  • Juniper Networks T1600 - page 71

    MultiServices PICs Left: MultiServices 100 PIC; Right: MultiServices 400 PIC Center: MultiServices 500 PIC MultiServices PICs ■ 71 MultiServices PICs ...

  • Juniper Networks T1600 - page 72

    Software release ■ MultiServices 100: JUNOS 8.5 and later (Type 1) ■ MultiServices 400: JUNOS 8.5 and later (Type 2) ■ MultiServices 500: JUNOS 8.5 and later (Type 3) ■ Supports tunnel services. This feature is included with the PIC and does not require an individual license. ■ Individual licenses must be purchased for additional services ...

  • Juniper Networks T1600 - page 73

    Table 30: MultiServices PICs Software Features Supported on the T1600 Routing Node (continued) 8.5 8.5 8.5 Port Address Translation (PAT) for port numbers 8.5 8.5 8.5 IP Security (IPSec) encryption 8.5 8.5 8.5 Active flow monitoring exports cflowd version 5 and version 8 records 8.5 8.5 8.5 Active flow monitoring exports flow monitoring version 9 r ...

  • Juniper Networks T1600 - page 74

    SONET/SDH OC3c/STM1 PIC ■ JUNOS 8.5 and later (Type 1) NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-mode intermediate reach PIC are both supported. Software release ■ Four OC3 ports ■ Power requirement: 0.49 A @ 48 V @ 23.7 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ ...

  • Juniper Networks T1600 - page 75

    One tricolor per port: ■ Off — Not enabled ■ Green — Online with no alarms or failures ■ Amber — Online with alarms for remote failures ■ Red — Active with a local alarm; router has detected a failure LEDs ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate s ...

  • Juniper Networks T1600 - page 76

    Table 31: Optical Interface Support for SONET/SDH OC3c/STM1 PICs Multimode Intermediate Reach Parameter Multimode Single-mode Optical interface Fixed Fixed Transceiver type Multivendor agreement Telcordia GR-253 Standard MMF cable: 1.2 miles/2 km SMF cable: 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1260 through 1360 nm Transmitter wavel ...

  • Juniper Networks T1600 - page 77

    SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFP POR T 3 Left: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1); Right: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 2) ■ 4-port: JUNOS 8.5 and later (Type 1) ■ 4-port: JUNOS 8.5 and later (Type 2) Software release ■ Rate-selectable using one of the following rates: ■ 1-port OC12 ■ 1-port OC12c ■ 4- ...

  • Juniper Networks T1600 - page 78

    ■ Optical diagnostics and related alarms ■ Per-port SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect (CC ...

  • Juniper Networks T1600 - page 79

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 80

    Table 32: Optical Interface Support for SONET/SDH OC3/STM1 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km Max ...

  • Juniper Networks T1600 - page 81

    SONET/SDH OC12c/STM4 PIC ■ JUNOS 8.5 and later Software release ■ One port ■ Power requirement: 0.23 A @ 48 V (10.8 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware features ■ SONET/SDH framing ■ Link aggregation ■ Alarm and event coun ...

  • Juniper Networks T1600 - page 82

    One tricolor per port: ■ Off — Not enabled ■ Green — Online with no alarms or failures ■ Amber — Online with alarms for remote failures ■ Red — Active with a local alarm; router has detected a failure LEDs ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate s ...

  • Juniper Networks T1600 - page 83

    Table 34: Optical Interface Support for SONET/SDH OC12c/STM4 PICs Multimode Intermediate Reach Parameter Multimode Single-mode Optical interface Fixed Fixed Transceiver type Multivendor agreement Telcordia GR-253 Standard MMF cable: 546.8 yards/500 m SMF cable: 9.3 miles/15 km Maximum distance 1270 through 1380 nm 1274 through 1356 nm Transmitter w ...

  • Juniper Networks T1600 - page 84

    SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFP Left: 1-port SONET/SDH OC12/STM4 (Multi-Rate) PIC; Right: 4-port SONET/SDH OC12/STM4 (Multi-Rate) PIC ■ 1-port: JUNOS 8.5 and later (Type 1) ■ 4-port: JUNOS 8.5 and later (Type 2) Software release ■ 1-port: Rate-selectable using one of the following rates: ■ 1-port OC3 ■ 1-port OC12 ■ 1-por ...

  • Juniper Networks T1600 - page 85

    ■ Optical diagnostics and related alarms ■ Per-port SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect (CC ...

  • Juniper Networks T1600 - page 86

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 87

    Table 35: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km Ma ...

  • Juniper Networks T1600 - page 88

    Table 37: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Long Reach (LR-2) Intermediate Reach (IR-1) Short Reach (SR-1) Parameter SFP SFP SFP Transceiver type SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 Telcordi ...

  • Juniper Networks T1600 - page 89

    SONET/SDH OC48c/STM16 PIC with SFP ■ JUNOS 8.5 and later Software release ■ Four OC48 ports ■ Power requirement: 0.46 A @ 48 V (22.1 W) Description ■ Multiplexing and demultiplexing on the 1-port PIC ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware features ■ Optical diagnostics and rela ...

  • Juniper Networks T1600 - page 90

    You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — See Table 38 on page 91 NOTE: To extend the life of the laser, when a PIC is not being actively used with a ...

  • Juniper Networks T1600 - page 91

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 92

    Table 38: Optical Interface Support for SONET/SDH OC48c/STM16 PICs with SFP (continued) Long Reach (LR) Intermediate Reach (IR) Short Reach (SR) Parameter SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 — L-16.3 Telcordia GR-253 Telcordia GR-253 Standard 1500 through 1580 nm 126 ...

  • Juniper Networks T1600 - page 93

    SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP ■ JUNOS 8.5 and later (Type 2) Software release ■ Rate-selectable using one of the following rates: ■ 1-port OC3c ■ 1-port OC12 ■ 1-port OC12c ■ 1-port OC48 ■ 1-port OC48c ■ Power requirement: 0.20 A @ 48 V (9.5 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on inp ...

  • Juniper Networks T1600 - page 94

    You can install any transceiver supported by the PIC. For information about installing and removing transceivers, see the PIC and Transceiver Installation Instructions . ■ Duplex LC/PC connector (Rx and Tx) ■ Optical interface support — See Table 39 on page 95, Table 40 on page 96, and Table 41 on page 96 NOTE: To extend the life of the laser ...

  • Juniper Networks T1600 - page 95

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 96

    Table 39: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC3/STM1 Rate (continued) Long Reach (LR-1) Intermediate Reach (IR-1) Multimode Parameter Single-mode Single-mode Multimode Optical interface SFP SFP SFP Transceiver type SMF cable: 24.85 miles/40 km SMF cable: 9.3 miles/15 km MMF cable: 1.2 miles/2 km M ...

  • Juniper Networks T1600 - page 97

    Table 41: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at an OC48/STM16 Rate (continued) Long Reach (LR-2) Intermediate Reach (IR-1) Short Reach (SR-1) Parameter SFP SFP SFP Transceiver type SMF cable: 49.71 miles/80 km SMF cable: 9.3 miles/15 km SMF cable: 1.24 miles/2 km Maximum distance Telcordia GR-253 Telcord ...

  • Juniper Networks T1600 - page 98

    SONET/SDH OC192c/STM64 PIC ■ JUNOS 8.5 and later (Type 3) Software release ■ Two OC192 ports ■ Power requirement: 0.45 A @ 48 V (21.6 W) Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware features ■ SONET/SDH framing ■ Link aggregation ■ Al ...

  • Juniper Networks T1600 - page 99

    ■ Very short reach (VSR 1): 12-ribbon multimode fiber with MTP connector (Rx and Tx) Optical interface support — See Table 42 on page 100 NOTE: To extend the life of the laser, when a PIC is not being actively used with any valid links, take the PIC offline until you are ready to establish a link to another device. For information about taking ...

  • Juniper Networks T1600 - page 100

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 101

    Table 42: Optical Interface Support for the SONET/SDH OC192 PIC (continued) Very Short Reach (VSR) 1 Transceiver Parameter OIF VSR4-1 Standard MMF cable: 984.25 feet/300 m Maximum distance 830 through 860 nm Transmitter wavelength – 10 through – 3 dBm Average launch power – 3 dBm Receiver saturation – 16 dBm Receiver sensitivity SONET/SDH O ...

  • Juniper Networks T1600 - page 102

    SONET/SDH OC192c/STM64 PICs with XFP Left: 1-port SONET/SDH OC192c/STM64 PIC; Right: 4-port SONET/SDH OC192c/STM64 PIC ■ 1-port: JUNOS 8.5 and later (Type 3) ■ 4-port: JUNOS 8.5 and later (Type 4) Software release ■ One or four OC192 ports ■ 4-port OC192 PIC with XFP: four OC192 links can be aggregated into one OC768 link or two OC256 links ...

  • Juniper Networks T1600 - page 103

    ■ Configuration of SONET or SDH framing on a per-port basis on the 4-port Type 4 PIC ■ SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame ...

  • Juniper Networks T1600 - page 104

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 105

    Table 43: Optical Interface Support for SONET/SDH OC192 PICs (continued) Long Reach (LR-2) Intermediate Reach (IR-2) Short reach (SR-1) Parameter XFP XFP XFP Transceiver type Telcordia GR-253 OC192 LR2 Telcordia GR-253 OC192 IR2 Telcordia GR-253 OC192 SR1 Standard SMF cable: 49.71 miles/80 km SMF cable: 24.8 miles/40 km; distances greater than 30 k ...

  • Juniper Networks T1600 - page 106

    SONET/SDH OC768c/STM256 PIC ■ JUNOS 8.5 and later (Type 4) Software release ■ One OC768 port ■ Power requirement: 1.37 A @ 48 V (65.7 W) ■ Optical interface support — see Table 44 on page 108 Description ■ Multiplexing and demultiplexing ■ Rate policing on input ■ Rate shaping on output ■ Packet buffering, Layer 2 parsing Hardware ...

  • Juniper Networks T1600 - page 107

    ■ SONET/SDH framing ■ Link aggregation ■ Alarm and event counting and detection ■ Dual-router automatic protection switching (APS) ■ Multiprotocol Label Switching (MPLS) fast reroute ■ Encapsulations: ■ High-Level Data Link Control (HDLC) ■ Frame Relay ■ Circuit cross-connect (CCC) ■ Translational cross-connect (TCC) ■ Point-t ...

  • Juniper Networks T1600 - page 108

    ■ SONET alarms: ■ Alarm indication signal — line (AIS-L) ■ Alarm indication signal — path (AIS-P) ■ Bit error rate signal degrade (BERR-SD) ■ Bit error rate signal fail (BERR-SF) ■ Bit interleaved parity (BIP) error B1 ■ Bit interleaved parity (BIP) error B2 ■ Bit interleaved parity (BIP) error B3 ■ Loss of frame (LOF) ■ Los ...

  • Juniper Networks T1600 - page 109

    Table 44: Optical Interface Support for SONET/SDH OC768 PICs (continued) Short Reach (SR) Optical Parameter 300-pin multi-source agreement (MSA) ITU G.693 VSR2000 – 3R2 Standard 1.24 miles/2 km Maximum distance 1530 through 1565 nm Transmitter wavelength 0 through +3 dBm Average launch power +3 dBm Receiver saturation – 6 dBm Receiver sensitivi ...

  • Juniper Networks T1600 - page 110

    Tunnel Services PIC ■ JUNOS 8.5 and later (Type 1) ■ JUNOS 8.5 and later (Type 2) ■ JUNOS 8.5 and later (Type 3) Software release ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ Loopback function that encapsulates and de-encapsulates packets ■ OC12/STM4 tunneling bandwidth on Type 1 FPC; OC48/STM16 tunneling bandwidth on Type 2 ...

  • Juniper Networks T1600 - page 111

    40-Gigabit Tunnel Services PIC ■ JUNOS 8.5 and later Software release ■ Power requirement: 0.07 A @ 48 V (3.4 W) Description ■ 40 gigabit loopback bandwidth that encapsulates and de-encapsulates packets Hardware features For a list of the software features available for services PICs, see the JUNOS Services Interfaces Configuration Guide . ? ...

  • Juniper Networks T1600 - page 112

    Appendix A High Availability Features High availability features include Routing Engine redundancy, graceful Routing Engine switchover (GRES), nonstop bridging, nonstop active routing, graceful restart for routing protocols, Virtual Router Redundancy Protocol (VRRP), and unified in-service software upgrade (ISSU). Some high availability features ar ...

  • Juniper Networks T1600 - page 113

    Copyright © 2008, Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or reg ...

Manufacturer Juniper Networks Category Network Router

Documents that we receive from a manufacturer of a Juniper Networks T1600 can be divided into several groups. They are, among others:
- Juniper Networks technical drawings
- T1600 manuals
- Juniper Networks product data sheets
- information booklets
- or energy labels Juniper Networks T1600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Juniper Networks T1600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Juniper Networks T1600, service manual, brief instructions and user manuals Juniper Networks T1600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Juniper Networks T1600.

Similar manuals

A complete manual for the device Juniper Networks T1600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Juniper Networks T1600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Juniper Networks T1600.

A complete Juniper Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Juniper Networks T1600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Juniper Networks T1600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Juniper Networks T1600, that we can find in the current document
3. Tips how to use the basic functions of the device Juniper Networks T1600 - which should help us in our first steps of using Juniper Networks T1600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Juniper Networks T1600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Juniper Networks T1600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Juniper Networks T1600?

Use the form below

If you did not solve your problem by using a manual Juniper Networks T1600, ask a question using the form below. If a user had a similar problem with Juniper Networks T1600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)