English dropdown-ico

Manual Barco R9002240

59 pages 1.98 mb
Download

Go to site of 59

Summary
  • Barco R9002240 - page 1

    VISION 1609s R9002240 R9002249 OWNER'S MANUAL ...

  • Barco R9002240 - page 2

    ...

  • Barco R9002240 - page 3

    BARCO PROJECTION SYSTEMS VISION 1609s R9002240 R9002249 Date : 131097 Art. No. : R5975688 OWNER'S MANUAL ...

  • Barco R9002240 - page 4

    Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, October 1997. All rights reserved. Trademarks are the rights of their respective owners. BARCO nv/Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco a ...

  • Barco R9002240 - page 5

    Table of Contents i-1 5975688 BARCOVISION 1609s 131097 Table of contents ................................................................................................................................................................................. i Safety instructions ............................................................................. ...

  • Barco R9002240 - page 6

    Table of Contents i-2 5975688 BARCOVISION 1609s 131097 Blanking Adjustments ............................................................................................................................................................... 6-15 Convergence Adjustment ...................................................................................... ...

  • Barco R9002240 - page 7

    Safety Instructions 1-1 5975688 BARCOVISION 1609S 131097 1 WARNING TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT) This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These l ...

  • Barco R9002240 - page 8

    Safety Instructions 1-2 5975688 BARCOVISION 1609S 131097 WARNING FOR THE CUSTOMERS : THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable. (If the supplied power cable is not the correct one, consult your dealer.) A. Mains lead (Power cord) with CEE 7 plug : The wires of the mains lead are colored in accordance with ...

  • Barco R9002240 - page 9

    Location and Function of Controls 2-1 5975628 BARCOGRAPHICS 1209S 010797 2 V NOM I MAX FREQ 120/ 23 0 Vo lt 7/5 Amp 50/6 0H z LOCA TION AND FUNCTION OF CONTROLS REAR PANEL TERMINOLOGY Communication Port (800 peripherals) * allows communication between the RCVDS switcher and the projector. * allows connection of a remote IR receiver unit to the proj ...

  • Barco R9002240 - page 10

    Location and Function of Controls 2-2 5975628 BARCOGRAPHICS 1209S 010797 stand-by sharpness pause/park tint color brightness contrast - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 32a b. RCU control panel terminology This remote control includes a battery powered infrared (IR) trans- mitter that allows the user to control the projector remotely. This rem ...

  • Barco R9002240 - page 11

    Connections 3-1 5975688 BARCOVISION 1609S 131097 3 V NOM I MAX FRE Q 120/ 230 Vo lt 7/5A mp 50/ 60Hz CONNECTIONS AC Power (mains) Cord Connection Use the supplied power cord to connect your projector to the wall outlet. Plug the female power connector into the male connector at the frontside of the projector. Power Check Power voltage indication on ...

  • Barco R9002240 - page 12

    Connections 3-2 5975688 BARCOVISION 1609S 131097 Signal Input Connection to the Projector : - Composite Video - S-Video - RGBS or RGsB - RGB3S or RG3sB (option) - Component Video Only available when the optional Tri-level sync module is installed. Port No Projector input Press Digit Button 1 Comp. Video 1 2 S-Video 1 /Comp. Video* 2 3 RGB 2 3 4/5 R ...

  • Barco R9002240 - page 13

    Connections 3-3 5975688 BARCOVISION 1609S 131097 Connecting a Composite Video source to port 1. Composite video signals from a VCR, OFF air signal decoder, etc.. Video input selection : with the RCU or the build in RCU : press digit button 1 * Note : if using the loop-through Video output, then set the Termination Switch to the "OFF" posi ...

  • Barco R9002240 - page 14

    Connections 3-4 5975688 BARCOVISION 1609S 131097 Connecting a RGB Analog source to port 3. Connect your RGB source via an interface to Port 3. Always use an interface when a computer and local monitor have to be connected to the projector. Barco interfaces which can be applied : Universal analog interface R9826100 RGB 120 MHz analog interface R9826 ...

  • Barco R9002240 - page 15

    Connections 3-5 5975688 BARCOVISION 1609S 131097 Connecting a RGB Analog source with Tri-level sync to port 4/5. (option) RGB analog input terminals with Tri level sync input or with Tri-level sync on green. The projector detects automati- cally where the sync signal is located. RGB input selection : (RG3sB : R, G, B signals with automatic Tri-leve ...

  • Barco R9002240 - page 16

    Connections 3-6 5975688 BARCOVISION 1609S 131097 PERIPHERAL EQUIPMENT Connecting a RCVDS 05 switcher to the projector - Up to 20 inputs with the RCVDS 05 switcher and up to 90 inputs when 10 RCVDS switchers are linked via the expansion modules. - Serial communication with the projector. - Remote control buttons on the RCVDS to control the projector ...

  • Barco R9002240 - page 17

    Controlling 4-1 5975688 BARCOVISION 1609S 131097 4 fig.1 310a. DRW fig.2 CONTROLLING Caution : Do not display a stationary image with full brightness and contrast for longer than 20 min., otherwise you risk damage to the CRT's. Battery installation in the RCU. A new battery is delivered inside the plastic bag with the power cord. Before using ...

  • Barco R9002240 - page 18

    Controlling 4-2 5975688 BARCOVISION 1609S 131097 c) RCU used in a hardwired configuration. Ceil ing Scre en IR se n sor RCU ADDR AD J EX IT STB Y MU TE TEXT BRI G HTNE SS - + - + - + - + SH ARPN ESS - + TIN T CO LOR CONTRAST 0 9 7 8 6 5 4 3 2 1 AD DR ADJ EXI T STB Y MU TE TEXT BR IG H TN ES S - + - + - + - + SHAR PN ES S - + TINT COL OR CONTRAST 0 ...

  • Barco R9002240 - page 19

    Controlling 4-3 5975688 BARCOVISION 1609S 131097 How to display a projector address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'. This text box disappears after a few seconds. To continue using your RCU, it is necessary to enter the same address with the dig ...

  • Barco R9002240 - page 20

    Controlling 4-4 5975688 BARCOVISION 1609S 131097 36 Analog Picture Controls The analog picture controls can be adjusted with the RCU. The control keys are located on the lower right side of the key panel of the RCU and indicated with the name of the control and an icon. When an analog picture control is pressed, a text box with bar scale and the fu ...

  • Barco R9002240 - page 21

    5-1 5975688 BARCOVISION 1609S 131097 Start Up of the Adjustment Mode 5 ST ART UP OF THE ADJUSTMENT MODE Adjustment Mode All picture geometry and convergence adjustments are made while in the 'Adjustment mode'. Press the ADJUST key to enter the 'adjustment mode'. You are now in the 'Adjustment mode' . The Control disk i ...

  • Barco R9002240 - page 22

    5-2 5975688 BARCOVISION 1609S 131097 Start Up of the Adjustment Mode enter password xxxx Some items in the Adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (Password protection is only available when the password DIP switch on the controller module is in the ON position. Contact a ...

  • Barco R9002240 - page 23

    6-1 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode 6 RANDOM ACCESS ADJUSTMENT MODE Starting-Up the Random Access Adjustment mode. Push the control disk up or down to highlight "RANDOM ACCESS" and then press ENTER . Some items in the Random access mode are password protected (when the password function is enabled). Enter yo ...

  • Barco R9002240 - page 24

    6-2 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode RANDOM ACCESS ADJUSTMENT MODE CONVERGENCE H SIZE V SIZE BLANKING LEFT BOTTOM RIGHT TOP V LINEARITY GREEN ONLY BLUE ON GREEN RED ON GREEN FOCUSING BLUE GREEN RED BLUE GREEN RED RED AND BLUE BLUE AND GREEN RED AND GREEN COLOR SELECT ORBITING CONTRAST MODULATION SOFT EDGE CORRECTION Fr ...

  • Barco R9002240 - page 25

    6-3 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Selecting Setup Pattern If an external source is connected to the projector, this menu will be displayed. Push the control disk up or down to highlight the desired setup pattern and then press ENTER . Genlocked pattern : internally generated cross hatch pattern, locked on the extern ...

  • Barco R9002240 - page 26

    6-4 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or <ENTER> to accept <EXIT> to return. Select with or then <ENTER> <EXIT> to return. RANDOM ACCESS ADJUSTMENT MODE PICTURE TUNING GEOMETRY CONVERGENCE FOCUSING COLOR SELECT ORBITING CONTR. MODULATION SOFT EDGE Select with or <ENTER> to accep ...

  • Barco R9002240 - page 27

    6-5 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or <ENTER> to accept <EXIT> to return. Clamp Tuning Highlight CLAMP TUNING by pushing the control disk up or down and press ENTER to toggle between NORMAL and RESTORATION. Select Normal : - for all standard sources and all sources with a backporch > 0.8µs ...

  • Barco R9002240 - page 28

    6-6 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Port 2 : Video or S-Video Port 2 can be used as a Video or S-Video input. Highlight Port 2 by pushing the control disk up or down and press ENTER to toggle between VIDEO and S-VIDEO. Select with or <ENTER> to accept < ...

  • Barco R9002240 - page 29

    6-7 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Focusing Before starting the 'focusing' adjustment, be sure the lenses are correctly focused. Push the control disk up or down to select 'Focusing' ...

  • Barco R9002240 - page 30

    6-8 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode H PHASE >< 70 H PH AS E >< 70 Select with or then <ENTER> <EXIT> to return. H P HAS E >< 70 Geometry Adjustments The geometry adjustments have to be done only on the green image. These adjustments are automatically implemented for the other color images ...

  • Barco R9002240 - page 31

    6-9 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode for bi dden area proj ect ed raster cr t f ac e pl at e bo r de r phosphor bo rder correct raster position wrong raster position Raster Shift Adjustment The green raster must be centered both horizontally and vertically on the center of the CRT surface. To center the green raster, l ...

  • Barco R9002240 - page 32

    6-10 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. LEFT-RIGHT Left-Right (east-west) Adjustments Left-right adjustments affect only the vertical lines of the projected image. Only the green image is displayed while making left-right adjustments. The red and blue images will ...

  • Barco R9002240 - page 33

    6-11 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Seagull correction Use this correction only if, after adjusting the vertical lines with the side bow or side keystone, still a 'S' deformation is visible on ...

  • Barco R9002240 - page 34

    6-12 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode TOP-BOTTOM Select with or then <ENTER> <EXIT> to return. Top-Bottom (north-south) Adjustments Top-Bottom and center adjustments affect only the horizontal lines of the projected image. To start up the Top-Bottom and center corrections, follow the next procedure : Push t ...

  • Barco R9002240 - page 35

    6-13 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. H size too large H size too small Ideal image width Seagull Correction Use this correction after the image has been adjusted with top and bottom bow and keystone. If ...

  • Barco R9002240 - page 36

    6-14 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Image too Tall Image too Short Ideal Im a ge Hight Ideal Image Hight Vertical Linearity Adjustment The vertical linearity adjustment function corrects for vertical no ...

  • Barco R9002240 - page 37

    6-15 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. BLANKING TOP BOTTOM LEFT RIGHT Blanking Adjustments Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwanted information ( ...

  • Barco R9002240 - page 38

    6-16 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. 25 23 9 15 17 24 22 8 14 16 5412 3 20 18 6 10 12 21 19 7 11 13 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> ...

  • Barco R9002240 - page 39

    6-17 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode Select with or then <ENTER> <EXIT> to return. COARSE CONVERGENCE Select with or then <ENTER> <EXIT> to return. HORIZONTAL SIDES VERTICAL CORNERS Select with or then <ENTER> <EXIT> to return. CONVERGENCE Select with or then <ENTER> <EXIT& ...

  • Barco R9002240 - page 40

    6-18 5975688 BARCOVISION 1609S 131097 Random Access Adjustment Mode ...

  • Barco R9002240 - page 41

    Service Mode 7-1 5975688 BARCOVISION 1609s 131097 7 Select with or then <ENTER> <EXIT> to return. Starting up the Service mode. Use the control disk to highlight 'Service' and then press ENTER . Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All ot ...

  • Barco R9002240 - page 42

    Service Mode 7-2 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or <ENTER> to copy <EXIT> to return. Identification Highlight 'Identification' with the control disk and press ENTER . The 'Identification' ...

  • Barco R9002240 - page 43

    Service Mode 7-3 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or <ENTER> to copy <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Deletion of all blocks Highlight 'delete all blocks' with the control disk and press ENTER . ENTER gives a confir ...

  • Barco R9002240 - page 44

    Service Mode 7-4 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. SERVICE MODE IDENTIFICATION COPY A BLOCK DELTE A BLOCK DELETE ALL BLOCKS CHANGE PASSWORD CHANGE LANGUAGE RUN TIME SET TO MIDPO ...

  • Barco R9002240 - page 45

    Service Mode 7-5 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. SERVICE MODE IDENTIFICATION COPY A BLOCK DELTE A BLOCK DELETE ALL BLOCKS CHANGE PASSWORD CHANGE LANGUAGE RUN TIME SET TO MIDPOSITION CONVERGENCE MID DYNAMIC ASTIGMATISM MORE... SET TO MIDPOSITION All settings in current block will be overwrit ...

  • Barco R9002240 - page 46

    Service Mode 7-6 5975688 BARCOVISION 1609s 131097         Spo t s hapes bef ore dy nami c asti gmati sm correc ti on Spot sha pe s a fte r dy n a m ic asti gmati sm correcti o n Di ag onal astig matism cor rect i on (u se th e an d a r ro w ke y) Axia l asti gmati sm correc ti on (use the an d a rrow k e y ) Select with or t ...

  • Barco R9002240 - page 47

    Service Mode 7-7 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. SERVICE MODE WARNING RISK OF INCORRECT ADJUSTMENT OF THE PROJECTOR THE GAMMA CORRECTIONS ARE FACTORY ADJUSTED USING AN ACTAS COLOUR ANALYSER ! THEREFORE, ONLY QUALIFIED INSTALLTION OR ...

  • Barco R9002240 - page 48

    Service Mode 7-8 5975688 BARCOVISION 1609s 131097 Select with or then <ENTER> <EXIT> to return. Select with or then <ENTER> <EXIT> to return. Projector Warm Up Highlight 'Projector Warm Up' by pushing the control disk up or down and press ENTER to select the projector warm up menu. The ON/OFF option can be toggled ...

  • Barco R9002240 - page 49

    Messages, warnings and failures 8-1 5975688 BARCOVISION 1609s 131097 8 MESSAGES, W ARNINGS AND F AILURES When selecting a new source, information about this source will be displayed on the screen. Source number, horizontal and vertical fre- quencies of the displayed source. SOURCE 01 Announcement of the selected source. INPUT 01 Fh= 15.6 kHz Fv= 05 ...

  • Barco R9002240 - page 50

    Messages, warnings and failures 8-2 5975688 BARCOVISION 1609s 131097 FAILURE RCVDS com- munication error Serial communication error be- tween the RCVDS and the projec- tor. FAILURE IRIS commu- nication error WAIT starting up IRIS Message during the start up of the IRIS. Message will disappear when the IRIS is ready to accept com- mands. Communicati ...

  • Barco R9002240 - page 51

    9-1 5975688 BARCOVISION 1609s 131097 Options 9 IR Receiver 800 This infrared receiver unit makes it possible to control the BARCOVISION 1609s from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS05. The control information from the RCU can now be sent to this IR receiver. The IR receiver ...

  • Barco R9002240 - page 52

    9-2 5975688 BARCOVISION 1609s 131097 Options MAGIK Interface Multifuctional Analog Graphics Interface Kit. BARCO's MAGIK interface allows the user to connect a presentation device such as a projector or a professional monitor to any computer with analog video signal with or without maintaining the connection with its own display. The MAGIK int ...

  • Barco R9002240 - page 53

    Orbiting A-1 5975628 BARCOGRAPHICS 1209s 010797 A <EXIT> to return. MASTER ORBITING CHANGE TO SLAVE MODE : ON SPEED : FAST ADJUST DEVIATION SELECT WITH OR THEN <ENTERN> DEVIATION ADJUST : VERTICAL WITH OR HORIZONTAL WITH OR <EXIT> to return. MASTER ORBITING CHANGE TO MASTER MODE : ON SPEED : FAST ADJUST DEVIATION SELECT WITH OR TH ...

  • Barco R9002240 - page 54

    Orbiting A-2 5975268 BARCOGRAPHICS 1209s 010797 Orbiting Speed Toggle (only in MASTER Orbiting) Highlight 'SPEED : SLOW' with the control stick and press ENTER to set the ORBITING SPEED to Fast. Highlight 'SPEED : FAST' with the control stick and press ENTER to set the ORBITING SPEED to Slow <EXIT> to return. MASTER ORBITI ...

  • Barco R9002240 - page 55

    Orbiting A-3 5975628 BARCOGRAPHICS 1209s 010797 Adjustment procedure multiple projector installations : Inportant : to allow corrections in the deviation alignments of the slave projectors, never adjust the deviations of the master projector to its maximum. Default setting of the Master projectorn see 'Stand-Alone projector'. Highlight &a ...

  • Barco R9002240 - page 56

    Orbiting A-4 5975268 BARCOGRAPHICS 1209s 010797 ...

  • Barco R9002240 - page 57

    Adjustment Blocks and Source Numbers 90-99 B-1 5975688 BARCOVISION 1609s 131097 Adjustment Blocks (memory blocks) As the projector is digitally controlled, all geometry and convergence adjustments are stored in the projectors memory as nume ric values. These numeric values are used to control digital potentiometers which in turn, control the pro ...

  • Barco R9002240 - page 58

    Adjustment Blocks and Source Numbers 90-99 B-2 5975688 BARCOVISION 1609s 131097 The alternate adjustment block for sources 0 - 9 (projector with RCVDS) or 1 - 5 (stand-alone projector) is activated by selecting the corresponding source number 0 - 9 (projector with RCVDS) or 1 - 5 (stand-alone projector). Once this source number is selected, the alt ...

  • Barco R9002240 - page 59

    Insert Card i-1 5975628 BARCOGRAPHICS 1209s 010797 3 INSERT CARD ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco R9002240 can be divided into several groups. They are, among others:
- Barco technical drawings
- R9002240 manuals
- Barco product data sheets
- information booklets
- or energy labels Barco R9002240
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco R9002240.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco R9002240, service manual, brief instructions and user manuals Barco R9002240. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco R9002240.

Similar manuals

A complete manual for the device Barco R9002240, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco R9002240 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco R9002240.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco R9002240 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco R9002240, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco R9002240, that we can find in the current document
3. Tips how to use the basic functions of the device Barco R9002240 - which should help us in our first steps of using Barco R9002240
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco R9002240
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco R9002240 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco R9002240?

Use the form below

If you did not solve your problem by using a manual Barco R9002240, ask a question using the form below. If a user had a similar problem with Barco R9002240 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)