English dropdown-ico

Manual Mitsubishi Electronics PUY-ANHA3

36 pages 0.79 mb
Download

Go to site of 36

Summary
  • Mitsubishi Electronics PUY-ANHA3 - page 1

    POUR L’INSTALLATEUR PARA EL INSTALADOR FOR INSTALLER Air-Conditioners PUZ-A·NHA3, PUZ-A·NHA3-BS PUY-A·NHA3, PUY-A·NHA3-BS INSTALLATION MANUAL For safe and correct use, read this manual and the indoor unit installation manual thoroughly before installing the air-conditioner unit. MANUEL D’INSTALLATION Avant d’installer le climatiseur, lire ...

  • Mitsubishi Electronics PUY-ANHA3 - page 2

    2 Contents 1. Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Installation location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Installing the outdoor unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Mitsubishi Electronics PUY-ANHA3 - page 3

    31-1/2 11-13/16+29/32 23-5/8 5-29/32 2-23/32 19-11/16 13 37-13/32 13+1-3/16 37-1/8(53-5/32) 6-7/8 23-5/8 14-9/16 3 1. Safety precautions 1.3. Before electric work Caution: • Be sure to install circuit breakers. If not installed, electric shock may result. • For the power lines, use standard cables of suf fi cient capacity. Otherwise, a short c ...

  • Mitsubishi Electronics PUY-ANHA3 - page 4

    Fig. 3-1 Max. 23/32 for A12, A18 Max. 1-3/16 for A24-A42 A24-A42 A12, A18 A24-A42 A12, A18 19-11/16 19-11/16 Min. 25-19/32 5-29/32 5-29/32 Min. 13-25/32 31-1/2 1-9/32 11-13/16 13 23-5/8 23-5/8 Min. 14-3/16 6-7/8 6-7/8 Min. 13/32 37-13/32 1-3/32 13 14-9/16 (inch) (inch)      M10(3/8”)bolt  Base  As long as possible.  Vent ? ...

  • Mitsubishi Electronics PUY-ANHA3 - page 5

    Flare cutting dimensions 45 ˚ ± 2 ˚ 90 ˚ ± 0.5 ˚       Flare nut tightening torque ø A R1/64 to R1/32 Fig. 4-2 (inch) Fig. 4-3            F ront piping cov er Piping cov er Stop valv e Service panel Bend radius : 100 mm, 3-15/16 inch-150 mm, 5-27/32 inch A24-A42 A12, A18 A Liquid pipe B Gas ...

  • Mitsubishi Electronics PUY-ANHA3 - page 6

    1    (1)         (2)          Model Max height difference Additional refrigerant charging amount (kg/oz) A12, A18 30 m, 100 ft 30 m, 100 ft 0 0.06 kg 0.11 kg 0.17 kg –––– ––– 2 oz 4 oz 6 oz A24, A30, A36 50 m, 165 ft 30 m, 100 ft 0 0.17 kg 0.34 kg 0.51 kg 0.68 kg 0.85 kg 1.02 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 7

    7 4. Installing the refrigerant piping 4.7. For twin combination (For A24, A36 only) Refrigerant piping limitation of length, height difference are shown in the fi gure. (Fig. 4-8) A Indoor unit B Outdoor unit C Multi distribution pipe (option) D Height difference (Indoor unit-Outdoor unit) Max. 30 m, 100 ft E Height difference (Indoor unit-Indoor ...

  • Mitsubishi Electronics PUY-ANHA3 - page 8

    8 CORD CO VER CONDUIT CO VER CABLE STRAP TERMINAL BED SER VICE P ANEL CONDUIT PLA TE : accessory GR L2 L1 S1 S2 S3 A12, A18 A24-A42 BG79U896H05.indd 8 BG79U896H05.indd 8 2009/03/23 10:24:42 2009/03/23 10:24:42 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 9

    S1 S2 S3 S1 S2 S3 208/230V Single phase Isolator 3 poles isolator A-Control Outdoor Unit A-Control Indoor Unit 9 6. Electrical work Warning: In case of A-control wiring, there is high voltage potential on the S3 terminal caused by electrical circuit design that has no electrical insulation between power line and communication signal line. Therefore ...

  • Mitsubishi Electronics PUY-ANHA3 - page 10

    10 8. Special Functions 8.1. Low noise mode (on-site modi fi cation) (Fig. 8-1) By performing the following modi fi cation, operation noise of the outdoor unit can be reduced by about 3-4 dB. The low noise mode will be activated when a commercially available timer or the contact input of an ON/OFF switch is added to the CNDM connector (option) on ...

  • Mitsubishi Electronics PUY-ANHA3 - page 11

    11 123456 * Set the refrigerant address using the DIP switch of the outdoor unit. 1 Wiring from the Remote Control This wire is connected to TB5 (terminal board for remote controller) of the indoor unit (non-polar). 2 When a Different Refrigerant System Grouping is Used. Up to 16 refrigerant systems can be controlled as one group using the slim MA ...

  • Mitsubishi Electronics PUY-ANHA3 - page 12

    12 3-15/16 (5-29/32) 7-7/8 ( 1 1-13/16 ) 39-3/8 Max. 19-1 1/16 19-1 1/16 (39-3/8) 7-7/8 (1 1 -13 /16) 39-3/8 (59-1/16) 1 1-13/16 (19-1 1/16) 39-3/8 (59-1/16) Max. 11 -13 /16 39-3/8 (59-1/16) 39-3/8 (59-1/16) 11-13/16 (19-11/16) 19-1 1/16 (39-3/8) 3-15/16 (5-29/32) 15-3/ 4 (23-5/8) 39-3/8 (78-23/32) 39-3/8 (59-1/16) 19-1 1/16 (31-1/2) 5-29/32 39-3/8 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 13

    13 Index 1. Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. Emplacement pour l’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3. Installation de l’appareil extérieur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4. In ...

  • Mitsubishi Electronics PUY-ANHA3 - page 14

    31-1/2 1 1-13/16+29/32 23-5/8 5-29/32 2-23/32 19-11/16 13 37-13/32 13+1-3/16 37-1/8(53-5/32) 6-7/8 23-5/8 14-9/16 14 1. Consignes de sécurité 1.3. Avant l’installation électrique Précaution: • Veiller à installer des coupe-circuits. Dans le cas contraire, un choc élec- trique peut se produire. • Pour les lignes électriques, utiliser de ...

  • Mitsubishi Electronics PUY-ANHA3 - page 15

    Fig. 3-1 Max. 23/32 for A12, A18 Max. 1-3/16 for A24-A42 A24-A42 A12, A18 A24-A42 A12, A18 19-11/16 19-11/16 Min. 25-19/32 5-29/32 5-29/32 Min. 13-25/32 31-1/2 1-9/32 11-13/16 13 23-5/8 23-5/8 Min. 14-3/16 6-7/8 6-7/8 Min. 13/32 37-13/32 1-3/32 13 14-9/16 (inch) (inch)      M10(3/8”)bolt  Base  As long as possible.  Vent ? ...

  • Mitsubishi Electronics PUY-ANHA3 - page 16

    Flare cutting dimensions 45 ˚ ± 2 ˚ 90 ˚ ± 0,5 ˚       Flare nut tightening torque ø A R1/64 à R1/32 Fig. 4-2 (inch) Fig. 4-3            F ront piping cov er Piping cov er Stop valv e Service panel Bend radius : 100 mm, 3-15/16 inch-150 mm, 5-27/32 inch A24-A42 A12, A18 16 4. Installation d ...

  • Mitsubishi Electronics PUY-ANHA3 - page 17

    1    (1)         (2)          17 4. Installation de la tuyauterie du réfrigérant 4.4. Test d’étanchéité des tuyaux de réfrigérant (1) Connecter les outils de test. • Véri fi er que les vannes d’arrêt A et B sont fermées et ne pas les ouvrir. • Ajouter de la pression dans ...

  • Mitsubishi Electronics PUY-ANHA3 - page 18

    18 4. Installation de la tuyauterie du réfrigérant 4.7. Pour une double combinaison (Pour A24, A36 uniquement) La limite de la longueur des tuyaux de réfrigérant ainsi que la différence de hauteur sont indiquées sur la fi gure. (Fig. 4-8) A Appareil intérieur B Appareil extérieur C Tuyau à distribution multiple (facultatif) D Différence ...

  • Mitsubishi Electronics PUY-ANHA3 - page 19

    19 CORD CO VER CONDUIT CO VER CABLE STRAP TERMINAL BED SER VICE P ANEL CONDUIT PLA TE : accessory GR L2 L1 S1 S2 S3 A12, A18 A24-A42 6. Installations électriques TERMINAL BED SANGLE A CABLE PANNEAU DE SERVICE COUVRE-CABLE COUVRE-TUBE PLAQUETTE DE TUBE: accessoire 02_BG79U896H05_FR.indd 19 02_BG79U896H05_FR.indd 19 2009/03/23 10:26:14 2009/03/23 10 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 20

    S1 S2 S3 S1 S2 S3 208/230V Single phase Isolator 3 poles isolator A-Control Outdoor Unit A-Control Indoor Unit 20 6. Installations électriques Avertissement: S’il s’agit d’un câblage de commande A, un risque de haute tension existe sur la borne S3 en raison d’une conception de circuit électrique dépourvue d’un isolant électrique entr ...

  • Mitsubishi Electronics PUY-ANHA3 - page 21

    21 8. Fonctions spéciales A Exemple de diagramme de circuit (mode à faible bruit) B Disposition sur site C Adaptateur d’entrée externe (PAC-SC36NA) 8.3. Récupération du réfrigérant (Aspiration) Effectuer les opérations suivantes pour récupérer le réfrigérant en cas de déplace- ment des appareils intérieur ou extérieur. 1 Mettre sou ...

  • Mitsubishi Electronics PUY-ANHA3 - page 22

    22 123456 * Régler l’adresse de réfrigérant avec le commutateur DIP de l’appareil extérieur. 1 Câblage depuis la télécommande Ce fi l se raccorde à TB5 (bornier de la télécommande) de l’appareil intérieur (non polaire). 2 Lors de l’utilisation d’un groupe à système de réfrigérant différent Il est possible de contrôler un ...

  • Mitsubishi Electronics PUY-ANHA3 - page 23

    23 3-15/16 (5-29/32) 7-7/8 ( 1 1-13/16 ) 39-3/8 Max. 19-1 1/16 19-1 1/16 (39-3/8) 7-7/ 8 (1 1-13/16) 39-3/8 (59-1/16) 1 1-13/16 (19-1 1/16) 39-3/8 (59-1/16) Max. 1 1-13/16 39-3/8 (59-1/16) 39-3/8 (59-1/16) 11-13/16 (19-11/16) 19-1 1/16 (39-3/8) 3-15/16 (5-29/32) 15-3/4 (23-5/8) 39-3/8 (78-23/32) 39-3/8 (59-1/16) 19-1 1/16 (31-1/2) 5-29/32 39-3/8 (5 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 24

    24 Contenido 1. Medidas de Seguridad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2. Lugar en que se instalará . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3. Instalación de la unidad exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4. ...

  • Mitsubishi Electronics PUY-ANHA3 - page 25

    31-1/2 11-13/16+29/32 23-5/8 5-29/32 2-23/32 19-11/16 13 37-13/32 13+1-3/16 37-1/8(53-5/32) 6-7/8 23-5 /8 14-9/16 25 1. Medidas de Seguridad 1.3. Antes de la instalación eléctrica Cuidado: • Asegúrese de instalar disyuntores. Si no se instalan, se podrían producir descargas eléctricas. • Use cables estándar de su fi ciente capacidad para ...

  • Mitsubishi Electronics PUY-ANHA3 - page 26

    Fig. 3-1 Max. 23/32 for A12, A18 Max. 1-3/16 for A24-A42 A24-A42 A12, A18 A24-A42 A12, A18 19-11/16 19-11/16 Min. 25-19/32 5-29/32 5-29/32 Min. 13-25/32 31-1/2 1-9/32 11-13/16 13 23-5/8 23-5/8 Min. 14-3/16 6-7/8 6-7/8 Min. 13/32 37-13/32 1-3/32 13 14-9/16 (inch) (inch)      M10(3/8”)bolt  Base  As long as possible.  Vent ? ...

  • Mitsubishi Electronics PUY-ANHA3 - page 27

    Flare cutting dimensions 45 ˚ ± 2 ˚ 90 ˚ ± 0,5 ˚       Flare nut tightening torque ø A R1/64 a R1/32 Fig. 4-2 (inch) Fig. 4-3            F ront piping cov er Piping cov er Stop valv e Service panel Bend radius : 100 mm, 3-15/16 inch-150 mm, 5-27/32 inch A24-A42 A12, A18 A Cubierta de la tube ...

  • Mitsubishi Electronics PUY-ANHA3 - page 28

    1    (1)         (2)          Modelo Longitud máxima de la tubería Diferencia máxima de altura Cantidad de carga de refrigerante adicional (kg/oz) 20m 71ft 25m 80ft 27m 90ft 30m 100ft 33,5m 110ft 36,6m 120ft 40m 130ft 43m 140ft 45,5m 150ft 48,8m 160ft 50m 165ft A12, A18 30 m, 100 ft 30 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 29

    29 4. Instalación de los tubos del refrigerante 4.7. Para combinación doble (sólo para A24 y A36) La limitación de diferencia de longitud y altura del tubo refrigerante aparece en la fi gura. (Fig. 4-8) A Unidad interior B Unidad exterior C Tubo de distribución múltiple (opción) D Diferencia de altura (Unidad interior-Unidad exterior) Máx. ...

  • Mitsubishi Electronics PUY-ANHA3 - page 30

    30 CORD CO VER CONDUIT CO VER CABLE STRAP TERMINAL BED SER VICE P ANEL CONDUIT PLA TE : accessory GR L2 L1 S1 S2 S3 A12, A18 A24-A42 6. Trabajo eléctrico BANCO DE TERMINALES BRIDA DE SUJECIÓN DE CABLES PANEL DE SERVICIO CUBIERTA DE CABLES CUBIERTA DEL CONDUCTO PLACA DEL CONDUCTO: accesorio 03_BG79U896H05_SP.indd 30 03_BG79U896H05_SP.indd 30 2009/ ...

  • Mitsubishi Electronics PUY-ANHA3 - page 31

    S1 S2 S3 S1 S2 S3 208/230V Single phase Isolator 3 poles isolator A-Control Outdoor Unit A-Control Indoor Unit 208/230 V Monofásicos Aislante Unidad Externa de “Control A” Aislante de 3 polos Unidad Interna de “Control A” 31 6. Trabajo eléctrico Atención: Si hay un cableado de control A habrá un alto voltaje potencial en el terminal S3 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 32

    32 8. Funciones especiales 8.1. Modo de reducción del ruido (modi fi cación in situ) (Fig. 8-1) Si lleva a cabo las siguientes modi fi caciones, puede reducir el ruido de la unidad exterior en 3 o 4 dB. El modo de reducción del ruido se activará cuando añada un programador (dis- ponible en los comercios) o si al conector CNDM (que se vende p ...

  • Mitsubishi Electronics PUY-ANHA3 - page 33

    33 123456 * Ajuste la dirección de refrigerante utilizando el interruptor DIP de la unidad exterior. 1 Cableado desde el control remoto Este cable se conecta a TB5 (bloque de terminales del control remoto) de la uni- dad interior (sin polaridad). 2 Cuando esté utilizando un agrupamiento de sistemas de refrigerante diferente Utilizando un control ...

  • Mitsubishi Electronics PUY-ANHA3 - page 34

    34 3-15/16 (5-29/32) 7-7/8 ( 1 1-13/16 ) 39-3/8 Max. 19-1 1/16 19-1 1/16 (39-3/8) 7-7/8 (1 1-13/16) 39-3/8 (59-1/16) 1 1-13/16 (19-1 1/16) 39-3/8 (59-1/16) Max. 1 1-13/16 39-3/8 (59-1/16) 39-3/8 (59-1/16) 11-13/16 (19-11/16) 19-1 1/16 (39-3/8) 3-15/16 (5-29/32) 15-3/ 4 (23-5/8) 39-3/8 (78-23/ 32) 39-3/8 ( 59-1/16) 19-1 1/16 (31-1/2) 5-29/32 39-3/8 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 35

    BG79U896H05.indd 13 BG79U896H05.indd 13 2009/03/23 10:24:51 2009/03/23 10:24:51 ...

  • Mitsubishi Electronics PUY-ANHA3 - page 36

    HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIY ODA-KU, TOKY O 100-8310, JAP AN Please be sure to put the contact address/telephone number on this manual before handing it to the customer. This product is designed and intended for use in the residential, commercial and light-industrial environment. BG79U896H05 Printed in Japan BG79U896H05.indd 14 ...

Manufacturer Mitsubishi Electronics Category Air Conditioner

Documents that we receive from a manufacturer of a Mitsubishi Electronics PUY-ANHA3 can be divided into several groups. They are, among others:
- Mitsubishi Electronics technical drawings
- PUY-ANHA3 manuals
- Mitsubishi Electronics product data sheets
- information booklets
- or energy labels Mitsubishi Electronics PUY-ANHA3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi Electronics PUY-ANHA3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi Electronics PUY-ANHA3, service manual, brief instructions and user manuals Mitsubishi Electronics PUY-ANHA3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi Electronics PUY-ANHA3.

Similar manuals

A complete manual for the device Mitsubishi Electronics PUY-ANHA3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi Electronics PUY-ANHA3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi Electronics PUY-ANHA3.

A complete Mitsubishi Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi Electronics PUY-ANHA3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi Electronics PUY-ANHA3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi Electronics PUY-ANHA3, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi Electronics PUY-ANHA3 - which should help us in our first steps of using Mitsubishi Electronics PUY-ANHA3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi Electronics PUY-ANHA3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi Electronics PUY-ANHA3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi Electronics PUY-ANHA3?

Use the form below

If you did not solve your problem by using a manual Mitsubishi Electronics PUY-ANHA3, ask a question using the form below. If a user had a similar problem with Mitsubishi Electronics PUY-ANHA3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)