English dropdown-ico

Manual ATEN ATEN MasterView CS-1732A

37 pages 13.84 mb
Download

Go to site of 37

Summary
  • ATEN ATEN MasterView CS-1732A - page 1

    2005-12-21 User Manual CS-1732 A CS-1734 A ...

  • ATEN ATEN MasterView CS-1732A - page 2

    2005-12-21 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency ener ...

  • ATEN ATEN MasterView CS-1732A - page 3

    Packing List The complete Master View CS-1732 A / CS-1734 A package consists of: w 1 CS-1732 A or CS-1734 A KVM Switch w 2 CS Custom KVM Cables (CS-1732 A ) w 4 CS Custom KVM Cables (CS-1734 A ) w 1 Firmware Upgrade Cable w 1 User Manual w 1 Quick Start Guide Check to make sure that all the components are present and that nothing was damaged in shi ...

  • ATEN ATEN MasterView CS-1732A - page 4

    2005-12-21 CS-1732 A / CS-1734 A User Manual iv ...

  • ATEN ATEN MasterView CS-1732A - page 5

    v CS-1732 A / CS-1734 A User Manual Contents 1. Introduction Features ................................2 Hardware Requirements ........................3 Console ..............................3 Computer .............................3 Cables ..............................3 2. Hardware Setup CS-1732 A / CS-1734 A Front View ..................5 CS-1732 ...

  • ATEN ATEN MasterView CS-1732A - page 6

    4. The Firmware Upgrade Utility Before You Begin ..........................2 3 Starting the Upgrade .........................2 4 Upgrade Succeeded .......................2 7 Upgrade Failed .........................2 7 Appendix Specifications ............................2 9 Troubleshooting ...........................3 0 Limited Warranty ............ ...

  • ATEN ATEN MasterView CS-1732A - page 7

    Chapter 1. Introduction Overview The Master View CS-1732 A and CS-1734 A represent a revolutionary new direction in KVM (Keyboard, Video, Mouse) Switches. The CS-1732 A and CS-1734 A are dual function two and four Port KVM Switches combined with 2 Port USB Hubs. As KVM switches, they allow users to access two and four computers from a single USB ke ...

  • ATEN ATEN MasterView CS-1732A - page 8

    Features w Dual function KVM-USB switch w One console controls 2 (CS-1732 A ) or 4 (CS-1734 A ) computers and two additional USB devices w Dual interface support - PS/2 or USB keyboard and mouse data transport* w Independent (asynchronous) switching of KVM and peripheral USB ports w Fully compliant with the USB 1.1 specification - supports transfer ...

  • ATEN ATEN MasterView CS-1732A - page 9

    Hardware Requirements Console w A VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any computer in the installation. w A USB style mouse w A USB style keyboard Computer The following equipment must be installed on each computer: w A VGA, SVGA or Multisync card. w Type A USB port, or PS/2 keyboard and mouse ...

  • ATEN ATEN MasterView CS-1732A - page 10

    Notes: 2005-12-21 CS-1732 A / CS-1734 A User Manual 4 ...

  • ATEN ATEN MasterView CS-1732A - page 11

    Chapter 2. Hardware Setup CS-1732 A / CS-1734 A Front View 2005-12-21 5 12 3 12 3 ...

  • ATEN ATEN MasterView CS-1732A - page 12

    1. Port Selection Switches w Press a switch for longer than two seconds to bring the KVM, USB hub, and audio focus to the computer attached to its corresponding port. w Press a switch for less than two seconds to bring only the KVM focus to the computer attached to its corresponding port. w Press switches 1 and 2 simultaneously for 2 seconds to sta ...

  • ATEN ATEN MasterView CS-1732A - page 13

    CS-1732 A / CS-1734 A Rear View 2005-12-21 Hardware Setup 7 1 3 2 6 4 56 1 3 2 6 4 56 ...

  • ATEN ATEN MasterView CS-1732A - page 14

    1. Console Audio Jacks The cables from your microphone and speakers plug in here. Each jack is marked with an appropriate icon to indicate itself. 2. USB Hub Section USB peripherals (printers, scanners, etc.) can plug into any available port. 3. Firmware Upgrade Section w Firmware Upgrade Switch During normal operation this switch should be in the ...

  • ATEN ATEN MasterView CS-1732A - page 15

    Before you Begin Cable Connection To set up your Master View CS-1732 A / CS-1734 A installation, refer to the installation diagrams on the following pages, and do the following: 1. Plug your USB keyboard and USB mouse into the USB Ports located on the unit’s front panel. 2. Plug your monitor into the Console monitor port located on the unit’s r ...

  • ATEN ATEN MasterView CS-1732A - page 16

    6. If you choose to use external power, plug the power adapter cable into the switch’s Power Jack, then plug the power adapter into an AC power source. Note: The power adapter should be DC5V 2.6A with the inside positive and the outside negative: 7. Turn on the power to the computers. 2005-12-21 CS-1732 A / CS-1734 A User Manual 10 1 2 3 4 4 5 6 ...

  • ATEN ATEN MasterView CS-1732A - page 17

    2005-12-21 Hardware Setup 11 5 USB Cable Connection: 5 PS/2 Cable Connection: ...

  • ATEN ATEN MasterView CS-1732A - page 18

    Hot Plugging The Master View CS-1732 A / CS-1734 A supports USB hot plugging - components can be removed and added back into the installation by unplugging their cables from the CPU ports without the need to shut the unit down. Powering Off and Restarting If it becomes necessary to Power Off the Master View unit, before starting it back up you must ...

  • ATEN ATEN MasterView CS-1732A - page 19

    Chapter 3. Hotkey Operation The CS-1732 A / CS-1734 A provides an extensive, easy-to-use, hotkey function that makes it convenient to control and configure your KVM installation from the keyboard. Hotkeys provide asynchronous (independent) switching of the KVM, USB hub and audio focus. If you wish, you can give one computer the KVM console focus, a ...

  • ATEN ATEN MasterView CS-1732A - page 20

    Going Directly to a Port Hotkey Action [Scroll Lock] [Scroll Lock] [n] [Enter] Brings the KVM, USB hub, and audio focus to the computer attached to the port corresponding to the specified Port ID. Note that the KVM, USB hub, and audio focus all go to this port even if they were on different ports to begin with. [Scroll Lock] [Scroll Lock] [n] [K] [ ...

  • ATEN ATEN MasterView CS-1732A - page 21

    Auto Scanning The CS-1732 A / CS-1734 A ‘s Auto Scan feature automatically cycles the KVM focus through the computer ports at regular intervals. This allows you to monitor the computer activity without having to take the trouble of switching from port to port manually. See the table below for details. Hotkey Action [Scroll Lock] [Scroll Lock] [A] ...

  • ATEN ATEN MasterView CS-1732A - page 22

    Hotkey Setting Mode Hotkey Setting Mode is used to set up your CS-1732 A / CS-1734 A switch configuration. All operations begin with invoking Hotkey Setting Mode (HSM). Invoking HSM To invoke HSM do the following: 1. Press and hold down the Num Lock key 2. Press and release the minus key 3. Release the Num Lock key Note: 1. There is an alternate ke ...

  • ATEN ATEN MasterView CS-1732A - page 23

    Alternate Port Switching Keys The port switching activation keys can be changed from tapping the Scroll Lock key twice ([Scroll Lock] [Scroll Lock]) to tapping the Ctrl key twice. To change the port switching activation keys, do the following: 1. Invoke HSM (see p. 16) 2. Press and release the T key Note: This procedure is a toggle between the two ...

  • ATEN ATEN MasterView CS-1732A - page 24

    List Hotkey Settings To see a listing of the current hotkey settings, do the following: 1. Invoke HSM (see p. 16). 2. Press and release the F4 function key. 3. Open a text editor or word processor and use its Paste function to display the settings. USB Reset If the USB loses focus and needs to be reset, do the following: 1. Invoke HSM (see p. 16). ...

  • ATEN ATEN MasterView CS-1732A - page 25

    Restore Default Settings To reset the CS-1732 A / CS-1734 A to its default hotkey settings, do the following: 1. Invoke HSM (see p. 16). 2. Press [R] [Enter] . All hotkey settings return to the factory default settings. HSM Summary Table After invoking HSM (see p. 16), key in one of the following keys to perform the corresponding function: Key Func ...

  • ATEN ATEN MasterView CS-1732A - page 26

    Keyboard Emulation Sun Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Sun keyboard when the Control key [Ctrl] is used in conjunction with other keys. The corresponding functions are shown in the table below. Note: When using [Ctrl] combinatons, press and release the Ctrl key, then press and release the activatio ...

  • ATEN ATEN MasterView CS-1732A - page 27

    Mac Keyboard The PC compatible (101/104 key) keyboard can emulate the functions of the Mac keyboard. The emulation mappings are listed in the table below. Note: When using key combinatons, press and release the first key, then press and release the second one. PS/2 Keyboard Mac Keyboard [Shift] Shift [Ctrl] Ctrl [Win] [Ctrl] [4] [Alt] L Alt/Option ...

  • ATEN ATEN MasterView CS-1732A - page 28

    Notes: 2005-12-21 CS-1732 A / CS-1734 A User Manual 22 ...

  • ATEN ATEN MasterView CS-1732A - page 29

    Chapter 4. The Firmware Upgrade Utility The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated process for upgrading the KVM switch’s firmware. The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware upgrade packages are posted on our web site as new firmware revision ...

  • ATEN ATEN MasterView CS-1732A - page 30

    6. Power the switch back on by plugging in one of the KVM cables. The switch’s front panel LEDs flash to indicate that it is in Firmware Upgrade Mode. Starting the Upgrade To upgrade your firmware: 1. Run the downloaded Firmware Upgrade Package file - either by double clicking the file icon, or by opening a command line and entering the full path ...

  • ATEN ATEN MasterView CS-1732A - page 31

    1. Click Next to continue. The Firmware Upgrade Utility main screen appears: The Utility inspects your installation. All the devices capable of being upgraded by the package are listed in the Device List panel. 2. As you select a device in the list, its description appears in the Device Description panel. 2005-12-21 The Firmware Upgrade Utility 25 ...

  • ATEN ATEN MasterView CS-1732A - page 32

    3. After you have made your device selection(s), Click Next to perform the upgrade. If you enabled Check Firmware Version , the Utility compares the device’s firmware level with that of the upgrade files. If it finds that the device’s version is higher than the upgrade version, it brings up a dialog box informing you of the situation and gives ...

  • ATEN ATEN MasterView CS-1732A - page 33

    Upgrade Succeeded After the upgrade has completed, a screen appears to inform you that the procedure was successful. To complete the upgrade: 1. Click Finish to close the Firmware Upgrade Utility. 2. Power off the switch by unplugging the KVM cable that you connected in step 6 of Before You Begin (see p. 23), from the back of the switch. 3. Remove ...

  • ATEN ATEN MasterView CS-1732A - page 34

    Notes: 2005-12-21 CS-1732 A / CS-1734 A User Manual 28 ...

  • ATEN ATEN MasterView CS-1732A - page 35

    Appendix Specifications Function CS-1732 A CS-1734 A Computer Connections 2 4 CPU Port Selection Front Panel Switches; Hotkey USB Port Selection Hotkey LEDs On Line 2 (Orange) 4 (Orange) USB Link 2 (Green) 4 (Green) Console Connectors Keyboard 1 x USB Type A Mouse 1 x USB Type A Video 1 x HDB -15 female Audio 1 x Stereo port 1 x Microphone port CPU ...

  • ATEN ATEN MasterView CS-1732A - page 36

    Troubleshooting Symptom Possible Cause Action Erratic behavior. Unit not receiving enough power. Use a DC 5V power adapter if you are not already using one. If you are already using a power adapter, check that it matches the system specifications (DC 5V), and that it is plugged in and functioning properly. Keyboard and/or Mouse not responding. Keyb ...

  • ATEN ATEN MasterView CS-1732A - page 37

    2005-12-21 The Firmware Upgrade Utility 31 Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN - TIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMEN - TATION. The direct vendor makes no warranty or representation, exp ...

Manufacturer ATEN Category Switch

Documents that we receive from a manufacturer of a ATEN ATEN MasterView CS-1732A can be divided into several groups. They are, among others:
- ATEN technical drawings
- MasterView CS-1732A manuals
- ATEN product data sheets
- information booklets
- or energy labels ATEN ATEN MasterView CS-1732A
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATEN ATEN MasterView CS-1732A.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATEN ATEN MasterView CS-1732A, service manual, brief instructions and user manuals ATEN ATEN MasterView CS-1732A. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATEN ATEN MasterView CS-1732A.

Similar manuals

A complete manual for the device ATEN ATEN MasterView CS-1732A, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATEN ATEN MasterView CS-1732A by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATEN ATEN MasterView CS-1732A.

A complete ATEN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATEN ATEN MasterView CS-1732A - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATEN ATEN MasterView CS-1732A, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATEN ATEN MasterView CS-1732A, that we can find in the current document
3. Tips how to use the basic functions of the device ATEN ATEN MasterView CS-1732A - which should help us in our first steps of using ATEN ATEN MasterView CS-1732A
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATEN ATEN MasterView CS-1732A
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATEN ATEN MasterView CS-1732A in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATEN ATEN MasterView CS-1732A?

Use the form below

If you did not solve your problem by using a manual ATEN ATEN MasterView CS-1732A, ask a question using the form below. If a user had a similar problem with ATEN ATEN MasterView CS-1732A it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)