English dropdown-ico

Manual Dixon 700 Series

21 pages 0.63 mb
Download

Go to site of 21

Summary
  • Dixon 700 Series - page 1

    ...

  • Dixon 700 Series - page 2

    TABLE OF CONTENTS I. OWNER INFORMATION Warranty Information -------------------------------------------- || Specifications ------------------------------------------------------- ||| II. SAFETY Accident Patterns -------------------------- ---------------------------- 1 Safety Instructions and Recommendation ----------------------- 1 Safety Interloc ...

  • Dixon 700 Series - page 3

    DIXON LIMITED WARRANTY POLICY - HYDRO - GEAR MODELS WARRANTY: Dixon Commercial War ranty term is for a period of one (1) year from date of purchase or 400 hours of use, whichever occurs first. Mowers used for residential homeowner applications (used only at owner's primary place of residence) are warranted for two (2) years from date of purcha ...

  • Dixon 700 Series - page 4

    ...

  • Dixon 700 Series - page 5

    ACCIDENT PATTERNS TO AVOID I. CONTACT WITH THE ROTATING BLADE -- This accident usually happens when the operator is clearing the discharge chute of grass, (especially when the grass is wet), or when th e operator adjusts the machine without turning it off and waiting for the blades to completely stop. II. PROPELLED OBJECTS - Sticks, rocks, wires, a ...

  • Dixon 700 Series - page 6

    7. DO NOT MOVE STEERING CONTROL LEVERS from forward position to reverse position rapidly. The speed and/or direction of travel is affected instantly by movement of the Steering Control Lever s. 8. DO NOT ALLOW CHILDREN TO OPERATE MOWER. Do not allow others who have not had instruction to operate mower. 9. ALWAYS TURN ENGINE OFF AND REMOVE KEY befor ...

  • Dixon 700 Series - page 7

    25. MOW ONLY DURING DAYLIGHT . 26. THIS MACHINE IS NOT MEANT FOR HIGHWAY OR STREET USE. It is not a recreational vehicle and it should not be operated as such. 27. ALWAYS DISENGAGE THE MOWER BLADE CLUTCH when transporting. SAFETY INTERLOCK SYSTEM Your Zero Turning Radius Mower is equipped with switches interlocked for your safety. 1. The mower blad ...

  • Dixon 700 Series - page 8

    12. Clean the air intake screen on the engine if necessary. 13 . Perform any other maintenance as it becomes necessary. (See the "Maintenance" section of this manual.) IMPORTANT: Before cutting grass, clutch must be broken - in as follows: With engine at full RPM engage deck until blades come to full speed and then di sengage until blades ...

  • Dixon 700 Series - page 9

    D. Slow engine speed with throttle to slowest position. E. Turn i gnition key to "OFF" (left) position. F. Remove the key and wait for all movement and all sound to cease before dismounting. 11. BRAKING: To brake mower, gently move the Steering Control Levers in the direction opposite to travel. If the parking b rake is engaged with the S ...

  • Dixon 700 Series - page 10

    MOWING RECOMMENDATIONS 1. Keep mower blades sharp. 2. Make sure deck and discharge are clean. 3. When mowing tall grass, m ake two passes, mowing off 1/2 of the desired cut on the first pass, and then the desired height the second pass. Check for hidden dangers first. 4. Go slowly for trimming. 5. Always cut grass with the engine at full throttle s ...

  • Dixon 700 Series - page 11

    MAINTENANCE INSTRUCTIONS 1. ENGINE: For complete maintenance and operating information for your engine, please refer to your engine operating and mainte nance instructions furnished by the engine manufacturer and included in your Dixon Zero Turning Radius Mower information packet. NOTE: Air intake screen must be kept clean. If plugged, engine may b ...

  • Dixon 700 Series - page 12

    D . Check balance of blade by positioning the blade on a nail or blade balance pedestal. Grind the blade on the end that is heavier until both sides balance. E. Install blade, cup washer, lockwasher, and bolt. Make sure to tighten bolt to 60 ft.lbs. 5. V - BEL TS: There are 3 V - belts on your Dixon Zero Turning Radius Mower. They should be checked ...

  • Dixon 700 Series - page 13

    8. STEERING CONTROL ADJUSTMENTS A. To Adjust Neutral: a. Remove the fender skirts from each side of the machine. b. Block u p the unit so that the Drive Wheels are off the ground. c. Start the engine and run at a fast idle with the Steering control levers in the "out" position. d. Loosen the locknuts tightened against the rod end ball joi ...

  • Dixon 700 Series - page 14

    9. HYDROSTATIC TRANSMISSIONS: Before each use, check to be sure that the cooling fins of the hydrostatic transmissions are clean. Excessive accumulation of oil, dirt, or trash may cause t he transmissions to overheat. NEVER WASH ACROSS TOP OF RESERVOIR with water or steam. Fill reservoir as required per the maintenance schedule listed in this book. ...

  • Dixon 700 Series - page 15

    PROCEDURE FOR RAISING AND LOWERING THE DECK FOR SERVICING 12. RAISING THE DECK: A. Remove cut height adjustment pin and completely lower the cut height adjustment lever. Re - insert the cut height adjustment pin into the 3 - 1/2 ° cut height position (this will lock the cut height adjustment lever into the lowest position). . B. Flip up the foot d ...

  • Dixon 700 Series - page 16

    12 P - 11408 (2/99) ...

  • Dixon 700 Series - page 17

    - .... . ' TROUBLE SHOOTING CHECK LIST 1. ENGINE WON T TURN OVER: Mower blades engaged —— --------- ————————————————— disengage blades Drive not in neutral ---------- — move Steering Control Levers to neutral "OUT" position Blown fuse ——————————— -------- —————? ...

  • Dixon 700 Series - page 18

    6. E NGINE SOMETIMES SKIPS AT HIGHER SPEEDS: Incorrect Ignition Timing ————————— ---- —————————— consult dealer Carburetor maladjusted —————————————— -- ———— readjust carburetor Faulty spark plugs —————————————————— ------- ———— che ...

  • Dixon 700 Series - page 19

    15 P - 11408 (2/99) ...

  • Dixon 700 Series - page 20

    NOTES: ...

  • Dixon 700 Series - page 21

    WAR NING The Engine Exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. ® Dixon a nd ZTR are registered trademarks of Dixon Industries, Inc. Dixon Industries, inc. A BLOUNT International, Inc. c ompany P.O. Box 1569 Coffeyville KS 673 37 0945 316 251 2000 P - 1140 ...

Manufacturer Dixon Category Lawn Mower

Documents that we receive from a manufacturer of a Dixon 700 Series can be divided into several groups. They are, among others:
- Dixon technical drawings
- 700 Series manuals
- Dixon product data sheets
- information booklets
- or energy labels Dixon 700 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dixon 700 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dixon 700 Series, service manual, brief instructions and user manuals Dixon 700 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dixon 700 Series.

Similar manuals

A complete manual for the device Dixon 700 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dixon 700 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dixon 700 Series.

A complete Dixon manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dixon 700 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dixon 700 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dixon 700 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Dixon 700 Series - which should help us in our first steps of using Dixon 700 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dixon 700 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dixon 700 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dixon 700 Series?

Use the form below

If you did not solve your problem by using a manual Dixon 700 Series, ask a question using the form below. If a user had a similar problem with Dixon 700 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)