-
Image IMTL11997 - page 1
USER'S MANUAL ® CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. IMTL11997 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .imagefitne ...
-
Image IMTL11997 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . ...
-
Image IMTL11997 - page 3
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it. Do not place the treadmill on any surface that blocks air op ...
-
Image IMTL11997 - page 4
21. Do not change the incline of the treadmill by placing objects under the treadmill. 22. When folding or moving the treadmill, make sure that the storage latch is fully closed. 23. When using iFIT.com CD’s and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always list ...
-
Image IMTL11997 - page 5
Thank you for selecting the revolutionary IMAGE ® 10.2QL treadmill. The IMAGE 10.2QL treadmill com- bines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home. And when you’re not exercising, the unique IMAGE 10.2QL can be folded up, requiring less than half the floor spac ...
-
Image IMTL11997 - page 6
3. With the help of a second person, carefully tip the Uprights (69) down as shown. Make sure that the Extension Legs (102) remain in the Uprights. Attach each Extension Leg (102) with two Screws (111) as shown. With the help of a second person, carefully tip the Uprights (69) back to the vertical position. Note: One replacement Base Pad (99) may b ...
-
Image IMTL11997 - page 7
7. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 24). To protect the floor or carpet from damage, place a mat under the treadmill. 6. Insert two Handrail Bolts (78) with Handrail Washers (77) and Handrail Bushings ( ...
-
Image IMTL11997 - page 8
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW ...
-
Image IMTL11997 - page 9
9 FEATURES OF THE CONSOLE The advanced console offers an impressive array of features to help you get the most from your exercise. When the console is in the manual mode, the speed and incline of the treadmill can be changed with a touch of a button. As you exercise, the console will provide continuous exercise feedback. You can even measure your h ...
-
Image IMTL11997 - page 10
10 GETTING STARTED Attach the clip to the waistband of your clothes. Stand on the foot pads of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is ...
-
Image IMTL11997 - page 11
11 HOW TO USE THE MANUAL MODE Insert the key fully into the console. See GETTING STARTED on page 10. Select the manual mode. When the key is in- serted, the manual mode will be selected and the Manual indica- tor will light. If a program has been selected, press the Select Pro- gram but ton r epeatedly to select the manual mode. Press the Start but ...
-
Image IMTL11997 - page 12
12 Speed/Pace display — This display shows the speed of the walking belt and your current pace (pace is mea- sured in minutes per mile ). The display will change from one number to the other every few seconds, as shown by the indi- cators around the display. Note: The console can display speed and dis- tance in either miles or kilometer s. To fin ...
-
Image IMTL11997 - page 13
13 Each program is divided into several time seg- ments of different lengths. The Time/Laps display shows both the time remaining in the program and the time remaining in the current segment. One speed setting and one incline setting are pro- grammed for each seg- ment. The speed setting for the first segment will be shown in the flashing Current S ...
-
Image IMTL11997 - page 14
14 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected. To select one of the custom programs, press the Select Program but - ton repeatedly until the Learn 1 or Learn 2 indicator lights. Note: If the custo ...
-
Image IMTL11997 - page 15
15 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 10. Select one of the custom programs. When the key is in- serted, the manual mode will be selected. To select one of the custom programs, press the Select Program but - ton repeatedly until the Learn 1 or Learn 2 indicator lights. When a custom program ...
-
Image IMTL11997 - page 16
16 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CD’s , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 19 and 20 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be connected to your VCR. See page 1 ...
-
Image IMTL11997 - page 17
17 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the ...
-
Image IMTL11997 - page 18
18 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 17. A. Plug one end of the audio cable into the ...
-
Image IMTL11997 - page 19
19 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St ...
-
Image IMTL11997 - page 20
20 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See HO ...
-
Image IMTL11997 - page 21
21 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the informati ...
-
Image IMTL11997 - page 22
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the ...
-
Image IMTL11997 - page 23
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The power ...
-
Image IMTL11997 - page 24
24 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench, ...
-
Image IMTL11997 - page 25
25 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with ...
-
Image IMTL11997 - page 26
P ART LIST—Model No. IMTL1 1997 R0202A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description 1 2 Foot Rail Insert 2 2 Foot Rail 3 2 Foot Rail Cap Screw 4 1 Left Fait Rail Cap 5 2 Frame Pivot Bolt 6 2 Frame Pivot Spacer 7 1 Magnet 8 1 Front Roller/Pulley ...
-
Image IMTL11997 - page 27
Key No. Qty. Description Key No. Qty. Description 103 2 Extension Cap 104 2 Incline Warning Decal 105 1 Shock 106* 1 Extension Leg Assembly 107 1 Audio Wire Nut 108 1 Book Holder 109 1 Power Cord Grommet 110 1 Frame 111 7 Screw 112 1 Catch 113 1 12” Audio Wire 114 1 Walking Belt 115* 1 Latch Assembly # 2 Thick Base Pad # 1 12” White Wire, M/F # ...
-
Image IMTL11997 - page 28
Part No. 183463 R0202A Printed in USA © 2002 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire IMAGE ® 10.2QL (“Product”) is warranted to be free of all defects in material and work- manship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser. HOW LONG ...
-
Image IMTL11997 - page 29
1 2 3 4 5 6 7 8 9 10 80 12 13 14 15* 18 16 17 19 20 24 22 9 21 25 26 25 56 29 30 27 9 32 34 14 35 9 6 5 9 37 3 36 9 24 38 39 40 41 42 43 39 80 80 83 45 46 47 100 50 49 2 51 1 53 53 52 11 4 49 47 100 49 49 55 56 57 58 34 59 60 59 34 61 49 55 53 54 11 0 54 53 62 109 100 47 111 11 2 53 53 11 3 44 96 80 83 101 31 67 67 28 28 107 100 47 63 100 63 EXPLOD ...
-
Image IMTL11997 - page 30
95 9 99 100 103 102 106* 85 86 89 80 91 92 94 93 99 100 111 99 100 103 104 102 106* 105 99 100 97 98 104 14 9 95 94 93 14 23 111 68 70 71 74 73 72 81 108 66 87 76 76 111 111 80 87 33 33 90 90 90 90 88 75 77 78 77 78 75 75 79 79 65 65 69 82 48 84 87 87 11 11 1 15* 28 64 33 90 33 90 EXPLODED DRA WING—Model No. IMTL1 1997 R0202A ...
Do you have a question concerning Image IMTL11997?
Use the form below
If you did not solve your problem by using a manual Image IMTL11997, ask a question using the form below. If a user had a similar problem with Image IMTL11997 it is likely that he will want to share the way to solve it.