Manual Clarion VMA5096

20 pages 1.63 mb
Download

Go to site of 20

Summary
  • Clarion VMA5096 - page 1

    VMA5096/VMA7196 1 Owner’s manual VMA5096 VMA7196 5” and 7” WIDE SCREEN COLOR LCD MONITOR Owner’s manual VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11/23/05, 2:52 PM 1 ...

  • Clarion VMA5096 - page 2

    2 VMA5096/VMA7196 E ng li s h Thank you for purchasing this Clarion product. • Please read this owner’s manual in its entirety before operating this equipment. • After reading this manual, keep it handy, such as in your glove compartment. FCC Approval This equipment has been tested and found to comply with the limits for a Class B digital dev ...

  • Clarion VMA5096 - page 3

    VMA5096/VMA7196 3 E ng li s h Contents 1. FEATURES ......................................................................................................................... 4 2. PRECAUTIONS .................................................................................................................. 5 Installation .............................. ...

  • Clarion VMA5096 - page 4

    4 VMA5096/VMA7196 E ng li s h 1. FEATURES The Clarion 5-inch VMA5096 and 7-inch VMA7196 are high-performance video monitors designed specifically for the mobile environment. Intended for use with other Clarion multimedia products, the monitors can be integrated with many other products as part of a complete mobile video solution. Two video inputs s ...

  • Clarion VMA5096 - page 5

    VMA5096/VMA7196 5 E ng li s h 2. PRECAUTIONS • Do not operate your monitor in ways other than those described in this manual. • Do not play a multimedia system when the car’s engine is turned off. Doing so runs down the car’s battery. • Do not disassemble or modify the monitor. • Keep moisture away from the monitor. Water and humidity m ...

  • Clarion VMA5096 - page 6

    6 VMA5096/VMA7196 E ng li s h 3. CONTROLS IR (infrared) receiver for Clarion remote control (hidden behind plastic) Accesses the display adjustment menus. Each time you press this button the unit steps to the next setting option and displays the current setting. Increases or selects adjust- ment settings Selects the viewing mode Selects the Video 1 ...

  • Clarion VMA5096 - page 7

    VMA5096/VMA7196 7 E ng li s h Configuration 1 Configuration 2 You don’t need to select the IR channel if you have only one monitor or two monitors and only one video source (Configuration 1—both monitors play the same video or game). 4. OPERATIONS Your monitor is a component of a full audio/video system that may include a VCR, DVD player, game ...

  • Clarion VMA5096 - page 8

    8 VMA5096/VMA7196 Playing a video or game Your monitor is preset at the factory to turn on automatically when you start your car’s ignition. The monitor remains dark until it detects a video signal. 1. Insert the media (tape, cartridge, game or disc) into the video source. 2. Turn on the headphones. If this is the first time you’ve used the uni ...

  • Clarion VMA5096 - page 9

    VMA5096/VMA7196 9 E ng li s h 2. Press MENU again until you reach the option you wish to adjust. The monitor displays the adjustment bar. Example of an adjustment bar TINT adjusts the overall color of the monitor. COLOR adjust the way each color displays. BRIGHT adjusts the monitor’s brightness. CONTRAST adjusts the differences between light and ...

  • Clarion VMA5096 - page 10

    10 VMA5096/VMA7196 E ng li s h Changing the video region mode (NTSC/PAL) 1. Press MENU several times to locate the VIDEOSYS option. 2. Press or to alternate between NTSC and PAL. Disabling automatic power on Your monitor is preset at the factory to switch on when you turn on your vehicle’s ignition. You can set it up to remain off until you press ...

  • Clarion VMA5096 - page 11

    VMA5096/VMA7196 11 Cleaning the LCD panel Use a soft, dry cloth to gently wipe off dust. The LCD panel surface can be easily scratched. Do not rub it with any abrasive object. Servicing the monitor In the event that trouble arises, never open the case or disassemble the unit. The internal parts are not serviceable by the user. Opening any component ...

  • Clarion VMA5096 - page 12

    12 VMA5096/VMA7196 E ng li s h Before starting Disconnect the ground (-) terminal on the vehicle’s battery. WARNING! To prevent short circuits during installation, be sure to disconnect the battery. Precautions • This unit is exclusively for vehicles with a negative ground, 12V power supply. • Do not open the case. There are no user-serviceab ...

  • Clarion VMA5096 - page 13

    VMA5096/VMA7196 13 E ng li s h Flush mounting in the headrest You may use the included trim bezel to flush-mount the monitor. 1. Ensure that you will have sufficient clearance for the monitor and its rear-located wiring harness. 2. Cut the opening. 3. Route the DIN-connector end of the wiring harness into the opening from the rear out the front. 4. ...

  • Clarion VMA5096 - page 14

    14 VMA5096/VMA7196 E ng li s h 7. Gently insert the monitor into the bezel. Press only on the edges of the monitor, not on the screen. You should hear a few soft clicks as the monitor locks into place. CAUTION! NEVER press on the surface of the screen! Gently press on the edges of the monitor case. If you find that you cannot in- sert the monitor w ...

  • Clarion VMA5096 - page 15

    VMA5096/VMA7196 15 E ng li s h Wiring the monitor Precautions • Disconnect the negative battery terminal before making any wiring connections. • Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires. • If the fuse should blow, make sure all connections are correct and no wire ...

  • Clarion VMA5096 - page 16

    16 VMA5096/VMA7196 Monitor connections CAUTION! Some non-Clarion automotive DVD and VCP source units use a similar connector for an external IR receiver, but use different pin polarity than the Clarion uses. Connecting non-Clarion source equip- ment to this connector could cause equipment damage not covered by the warranty! IR connector polarity Co ...

  • Clarion VMA5096 - page 17

    VMA5096/VMA7196 17 E ng li s h 7. Troubleshooting The monitor does not turn on A fuse may be blown. Replace the external fuse with a fuse of the same value. The power wires may not be connected. Check the wiring connections and retest. No picture. Press INPUT to make sure the proper input is selected. If there is still no picture, press MENU . If t ...

  • Clarion VMA5096 - page 18

    18 VMA5096/VMA7196 8. Specifications Note The technical data and the design of the equipment may change without prior notice for the sake of technical improvements. VMA5096 General Specifications Power requirement: 12V DC (9V-16V) Power consumpaion: 6.5 watts, power on 0.6 amps (600mA) Weight: 300 g Dimensions (w x h x d): 138 x 106 x 26.5 mm Inclu ...

  • Clarion VMA5096 - page 19

    VMA5096/VMA7196 19 9. LIMITED WARRANTY INFORMATION For USA and Canada only Except as noted, Clarion products purchased from an authorized Clarion dealer are warranted against all defects in materials and workmanship for a period of one (1) year from date of original purchase. The following Clarion products noted below ** are warranted against all d ...

  • Clarion VMA5096 - page 20

    20 VMA5096/VMA7196 Clarion Corporation of America All Rights Reserved. Copyright C 2006: Clarion Corp. of America Printed in China VMA5096_VMA7196_OwnersManual_rev.pmd.p65 11/23/05, 2:54 PM 20 ...

Manufacturer Clarion Category Flat Panel Television

Documents that we receive from a manufacturer of a Clarion VMA5096 can be divided into several groups. They are, among others:
- Clarion technical drawings
- VMA5096 manuals
- Clarion product data sheets
- information booklets
- or energy labels Clarion VMA5096
All of them are important, but the most important information from the point of view of use of the device are in the user manual Clarion VMA5096.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Clarion VMA5096, service manual, brief instructions and user manuals Clarion VMA5096. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Clarion VMA5096.

Similar manuals

A complete manual for the device Clarion VMA5096, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Clarion VMA5096 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Clarion VMA5096.

A complete Clarion manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Clarion VMA5096 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Clarion VMA5096, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Clarion VMA5096, that we can find in the current document
3. Tips how to use the basic functions of the device Clarion VMA5096 - which should help us in our first steps of using Clarion VMA5096
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Clarion VMA5096
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Clarion VMA5096 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Clarion VMA5096?

Use the form below

If you did not solve your problem by using a manual Clarion VMA5096, ask a question using the form below. If a user had a similar problem with Clarion VMA5096 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)