English dropdown-ico

Manual Lowrance electronic 10776001

137 pages 26.06 mb
Download

Go to site of 137

Summary
  • Lowrance electronic 10776001 - page 1

    ENGLISH HDS Gen2 T ouch Operator manual lowr ance .com ...

  • Lowrance electronic 10776001 - page 2

    Cop yright © 2013 Navic o All Rights Reserved Lowrance® and Na vico® are reg istered trademarks of Navico. F ishing Hot Spots® is a regist ered trademark of F ishing Hot Spots Inc. Copyright© 2013 F ishing Hot Spots. Navionics® is a reg istered trademark of Navionics, Inc. NMEA 2000® is a regist ered trademark of the National Marine Elec tro ...

  • Lowrance electronic 10776001 - page 3

    | 1 Pr eface As Navico is continuously impr oving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. P lease contact your Lowrance dealer if y ou require an y further assistance. It is the owner ’ s sole responsibility to install and use the instrument and transd ...

  • Lowrance electronic 10776001 - page 4

    2 | About this manual This manual is a ref erence guide f or operating the Lowrance HDS Gen 2 T ouch system. It assumes that all equipment is installed and configured, and that the syst em is ready to use . The manual does not cover basic background inf ormation about how equipment such as radars, sonars and AIS work. Such information is available ...

  • Lowrance electronic 10776001 - page 5

    PB | | 3 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch C onten ts 7 Introduction 7 HDS Gen 2 T ouchscreen and k eys 8 The HDS Gen2 T ouch home screen 9 Basic operation 9 The power key 9 First time startup 9 Us ing the t ouchsc reen 10 M e n u s 1 2 Dialog boxes 1 3 Po sition ing a Man Overboard wa ypoint 1 4 Screen cap ...

  • Lowrance electronic 10776001 - page 6

    4 | | 5 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 37 Navigating 3 7 Goto cursor 3 7 Na vigati ng on the chart 38 Navigation set tings panel 40 St eer page 41 Sonar 4 2 Z ooming 4 3 Viewing sonar hi story 4 5 Log sonar d ata 47 V i e w 4 9 Mea suri ng distanc e 50 Sonar settings 5 2 Installation set tings 54 Structu ...

  • Lowrance electronic 10776001 - page 7

    4 | | 5 Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 69 The Alarm sy stem 69 The alarms dia log 7 1 Ac knowledging an alarm 72 Utilities 72 Ve ss e ls 73 S un/ moon 73 T rip Calculator 73 Fin d 73 Al ar ms 73 Way p oi nt s/rou tes / tr ai ls 74 T i d e s 7 4 S atel li tes 7 4 Files 7 6 Settin gs 77 Sy stem Settings 77 ...

  • Lowrance electronic 10776001 - page 8

    6 | | PB Conten ts | Lowranc e HDS Gen2 T ouch Conten ts | Lowranc e HDS Gen2 T ouch 99 Networking 99 Aut o c onfigura tion 99 Data sour c es 1 0 1 Dampi ng 1 02 Device li st 1 02 Diag nostics 1 03 NMEA 2000 1 03 NMEA 0 1 8 3 104 GoFree wir eless 1 0 4 Setting HDS device n ame 1 0 4 Setting up the WIFI- 1 1 0 6 Operating the HD S with a wire less ...

  • Lowrance electronic 10776001 - page 9

    | 7 Introduction | Lowrance HDS Gen2 T ouch Introduction HDS Gen2 T ouchscreen and key s 1 T ouchscreen 2 SD Card re ader Used for optional InsightHD , Navionics, other compatible thir d-part y car tography , sof tware updates, transf er of user data and system backup. 3 Way p o i n t k e y A shor t press opens the waypoint menu . A long press open ...

  • Lowrance electronic 10776001 - page 10

    8 | Introduction | Lowrance HDS Gen2 T ouch The HDS Gen2 T ouch home screen ¼ Note: vide o is only a vailable on HD S Gen2 T ouch 9” and 1 2” units. The radar option will on ly be shown when the unit i s c onnec ted to a r a d a r. 1 Utilities panel T ap an icon to access utility data. 2 F av orites panel Used to display F avorite pages, save ...

  • Lowrance electronic 10776001 - page 11

    | 9 Basic Operation | Lowr ance HDS Gen2 T ouch Basic operation The po wer k ey • Pr ess and hold: T urn unit on/off • Single press: Display dialog for brightness adjustment, night mode, standby mode and power off • Repeated presses: T oggle preset brightness levels (10 - 6 - 3- 1) ¼ Note: If the p ower k ey is r elea sed before shut - dow ...

  • Lowrance electronic 10776001 - page 12

    10 | Basic Operation | Lowr ance HDS Gen2 T ouch Operation Menu/Dialogs P ages Char t Sonar R adar Ta p Select/toggle item Activate cursor Pr ess and hold n/a Activate cursor assist mode Drag Adjust slider value Scroll dialog Hide page menu (Drag right) P an chart (any direction) P an water column (any direction) P an sonar history (horizontal move ...

  • Lowrance electronic 10776001 - page 13

    | 11 Basic Operation | Lowr ance HDS Gen2 T ouch Back button Y ou can return to the previous screen or menu by pr essing the Back button. Hidden system menu The page menu for each operation mode has a hidden syst em menu. T o access the hidden system menu , place your finger on the top menu item and drag down. Page men u Hiding page menu Operation ...

  • Lowrance electronic 10776001 - page 14

    12 | Basic Operation | Lowr ance HDS Gen2 T ouch Settings dialog Y ou can access the settings dialog for each operation mode from the hidden system menu or from the Utilities panel on the home screen. Dialog box es Y ou selec t entr y fields and keys in a dialog box by tapping the screen. Y ou can only enter inf ormation when a field is selected ...

  • Lowrance electronic 10776001 - page 15

    | 13 Basic Operation | Lowr ance HDS Gen2 T ouch Using the cursor The cursor is by default not shown on any page . T ap the screen t o activate the cursor on the char t, sonar , structure and radar pages. The cursor information window will show position coor dinates at the cursor position and range and bearing to the vessel. On the Sonar page, the ...

  • Lowrance electronic 10776001 - page 16

    14 | Basic Operation | Lowr ance HDS Gen2 T ouch Cancel na vigation The unit will continue navigating towar d the MOB waypoint until the waypoint is reached or until you cancel na vigation. Delete a MOB wa ypoint 1. Cancel navigation. 2. Ta p Wa ypo int MO B on the pa ge menu. 3. Ta p Delete . Screen capture Simultaneously press and hold the P AGES ...

  • Lowrance electronic 10776001 - page 17

    | 15 Pages | L owrance HDS Gen2 T ouch P ages P age ov erview This unit supports up to 7 page t ypes. Each has a corresponding group of pr econfigured quick split combo pages . ¼ Note: V ideo is avail able only on 9” and 1 2” units . The radar option will only be sho wn when the unit i s con nec ted to a rada r . Quick splits are two-panel co ...

  • Lowrance electronic 10776001 - page 18

    16 | Pages | L owrance HDS Gen2 T ouch Selec ting Active panel Y ou can change ac tive panels by tapping the desired panel . The active panel will have an orange border . Adjusting splits The size of panels can be adjusted by tapping A djust splits on the hidden system menu. Drag the adjustment button horizontally t o resize the panels . T ap Save ...

  • Lowrance electronic 10776001 - page 19

    | 17 Pages | L owrance HDS Gen2 T ouch Y ou can selec t from seven diff erent panel configurations as illus- trated below . ¼ Note: Y ou can cycle thr ough fav orite pages by pr essi ng the PAG E S k e y. Editing fav orites 1. Ta p Customize on the F avorites panel 2. T ap an existing favorite 3. D rag a pa ge icon from the preview 4. Ta p Save ...

  • Lowrance electronic 10776001 - page 20

    18 | Pages | L owrance HDS Gen2 T ouch Deleting fav orites 1. Ta p Customize on the F avorites panel 2. T ap the page icon for the pag e you want to remov e 3. Ta p Clear and tap S ave Data Overla y Allows you to ov erlay information on the active page. Y ou can turn on/off viewing of overlay data and edit/add overlay data by accessing the hidden ...

  • Lowrance electronic 10776001 - page 21

    | 19 Chart | Lowrance HDS Gen2 T ouch Char t The chart page displays your position relative to land and other char t objects. On the page you can plan and navigate r outes, place waypoints, ov erlay a radar image, a StructureMap image and weather information, and display AIS tar gets. ¼ Note: T his unit has different embe dde d car tography dep e ...

  • Lowrance electronic 10776001 - page 22

    20 | Chart | Lowrance HDS Gen2 T ouch Char t scale Y ou zoom in and out on the char t by using the ZOOM key s. Char t range scale and range rings inter val (when turned on) will be shown in the lower right corner of the chart panel. Using the cursor on the chart page The cursor is by default not shown on the chart page. When you tap the screen, the ...

  • Lowrance electronic 10776001 - page 23

    | 21 Chart | Lowrance HDS Gen2 T ouch Char t menu When the cursor is active, some featur es on the chart menu will be replaced with cursor mode f eatures. T ap Clear cursor to return to the normal char t menu. Saving wa ypoints When the cursor is not active, you can sav e a waypoint at the vessel position by tapping New w aypoint on the char t menu ...

  • Lowrance electronic 10776001 - page 24

    22 | Chart | Lowrance HDS Gen2 T ouch ¼ Note: T o mea sur e di stance from you r vessel , tap the des ired location on the map and the di stance t o tha t location wil l be shown in the info box i n the lower left corner of the screen. 1. T ap the scre en and then tap Me asure on the menu • The measuri ng icon s will a ppear with a li ne drawn f ...

  • Lowrance electronic 10776001 - page 25

    | 23 Chart | Lowrance HDS Gen2 T ouch Heading up Displays the chart with the vessel’ s heading directly up on the chart image. Heading inf ormation is received from a compass . If heading is not available, then the C OG from the GPS will be used . Course up Rotates the chart in the direction of the nex t point when in navigation mode. If the unit ...

  • Lowrance electronic 10776001 - page 26

    24 | Chart | Lowrance HDS Gen2 T ouch Y ou can change the camera tilt angle and rotate the camera around the vessel by dragging y our finger on the screen. ¼ Note: W hen in ro tat e mode, u se horizonta l motions t o r otat e the vessel. U se v er tical motion s to c hange the viewe r perspec tive. When rotate is selected the camera position is ? ...

  • Lowrance electronic 10776001 - page 27

    | 25 Chart | Lowrance HDS Gen2 T ouch Medium This is the minimum information sufficient f or navigation F ull This is all available inf ormation for the chart in use Cat egories Insight char ts includes several categories and sub -categories that you can turn on/off individually depending on which information you want to see on your displa y . Dis ...

  • Lowrance electronic 10776001 - page 28

    26 | Chart | Lowrance HDS Gen2 T ouch Selec ting chart data This unit can use built-in L owrance map data as well as Navionics , F ishing Hotspots, Jeppesen and other third-party mapping cards. T ap Change to Navionics or Change to L owranc e to switch chart data the unit is using. ¼ Note: T he sys tem wil l not aut oma tically swit ch t o embedde ...

  • Lowrance electronic 10776001 - page 29

    | 27 Chart | Lowrance HDS Gen2 T ouch Char t Settings 3D boat selection Y ou can selec t different boat icons that will be used as the curr ent position symbol when the char t is in 3D mode. Range Rings Y ou can turn on/off range r ings from the chart settings menu. The range rings can be used to show the distance from y our vessel to other chart ...

  • Lowrance electronic 10776001 - page 30

    28 | Chart | Lowrance HDS Gen2 T ouch P op-up information Selects whether basic information for chart items shall be displayed when you tap the item. Grid lines T urns on/off viewing of longitude and latitude grid lines on the char t. W a ypoints, r outes and trails Y ou can turn on/off vie wing of waypoints, rout es and trails on the char t. Nav ...

  • Lowrance electronic 10776001 - page 31

    | 29 Chart | Lowrance HDS Gen2 T ouch Community la yer T urns on/off viewing of user generated data downloaded from the Navionics website . Vi e w Shading Shading adds terrain information to the chart. T r aditional 2D chart Chart with shading Dynamic Icons Changes traditional stations to animated icons showing current direction, strength and tide ...

  • Lowrance electronic 10776001 - page 32

    30 | Chart | Lowrance HDS Gen2 T ouch Photo transparency The Photo transpar ency sets the opaqueness of the photo overlay . With minimum transparency settings the chart details will be almost hidden by the photo . Depth range (highlighting) Allows user to specify a range of depths to be highlighted . Depths will be rounded to the closest contour in ...

  • Lowrance electronic 10776001 - page 33

    | 31 Chart | Lowrance HDS Gen2 T ouch Navionics settings Optional settings for Navionics charts T r aditional 2D chart Chart with shading Colored Seabed Ar eas Colors differ ent parts of the seabed to provide better definition of seabed composition. Annotation Determines what area information, such as names of locations and notes of areas , is av ...

  • Lowrance electronic 10776001 - page 34

    32 | W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch W aypoints , r outes & tr ails The waypoin ts, r oute and trails scr eens The W aypoints , Routes and T rails dialogs give access to advanced edit functions and settings for all these items available on your system. W aypoint, r oute and trail screens ar e accessed from the hom ...

  • Lowrance electronic 10776001 - page 35

    | 33 W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch P ositioning waypoints Placing a waypoint a t vessel position With the cursor inactive, you can position a wa ypoint at the vessel position from any page b y pressing the dedicated W A YPOINT key twice. Using the cursor to position wa ypoints On char t, sonar and structure pages yo ...

  • Lowrance electronic 10776001 - page 36

    34 | W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch Moving a waypoint b y tapping the screen 1. T ap the w aypoint - The waypoint na me will appear on the page menu 2. T ap the waypoint name 3. Ta p Move on the menu - The waypoint ic on wil l change to i ndicat e moving mode 4. D rag the w aypoint to its new p osition 5. Confirm th ...

  • Lowrance electronic 10776001 - page 37

    | 35 W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch Creating r outes using existing w aypoints 1. Acc ess the routes dialog 2. Ta p New 3. Ta p Create using route list 4. T ap the new route window (shown below) 5. Ta p Inser t 6. T ap the desired waypoint 7. Repeat Steps 4 , 5 and 6 until all points have been placed 8. Ta p Save Edi ...

  • Lowrance electronic 10776001 - page 38

    36 | W aypoints, Rout es & T rails | L owranc e HDS Gen2 T ouch T rails A trail is a graphical presentation of the hist orical path of the vessel, allowing you to r etrace where you ha ve traveled . A trail can be con- verted to a route in the Trail scr een, as described later in this section. F rom the factory, the system is set t o automatica ...

  • Lowrance electronic 10776001 - page 39

    | 37 Navigating | Lo wrance HDS Gen2 T ouch Naviga ting The navigation function included in your unit allows you to na vigate towards the cursor position, a wa ypoint or along a predefined rout e. F or information about positioning waypoints and cr eating routes , ref er to “ W aypoints, r outes & trails ” on page 32. Goto cursor Y ou can ...

  • Lowrance electronic 10776001 - page 40

    38 | Navigating | Lo wrance HDS Gen2 T ouch When route navigation is started, the menu will expand showing options for skipping a waypoint, or for r estar ting the route fr om current vessel position. Selec ting start p oint Y ou can navigate a route, starting from any r outepoint, by positioning the cursor over the selected routepoint and tapping ...

  • Lowrance electronic 10776001 - page 41

    | 39 Navigating | Lo wrance HDS Gen2 T ouch Arrival r adius Sets an invisible circle ar ound the destination waypoint. The vessel is considered arrived at the waypoint when it is within this radius. XTE limit (Cr oss track err or) This parameter defines the vessel’ s accepted offset distance from the leg . If the vessel goes beyond this limit a ...

  • Lowrance electronic 10776001 - page 42

    40 | Navigating | Lo wrance HDS Gen2 T ouch Steer page The Steer page can be used to display inf ormation when you are navigating. Data elds The Steer page displays the f ollowing information: DTD Distance to destination XTE Cross track error SOG Speed over gr ound T TD Time to destination COG Course over g round POS P osition The course line Wh ...

  • Lowrance electronic 10776001 - page 43

    PB | | 41 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sonar The sonar function provides an underwater view of the area under and around your boat, allowing y ou to detect fish and examine bottom structure. The sonar displays the water column moving fr om right to left on the page. Y ou can selec t between single page view and ...

  • Lowrance electronic 10776001 - page 44

    42 | | 43 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch T o remove the cursor and cursor elements fr om the page, tap Clear cursor on the Sonar menu. Pr ess and hold the screen to activate cursor assist mode . Goto cursor Y ou can navigate to the cursor by tapping Goto cursor on the menu. Saving a wa ypoint Y ou can save a waypo ...

  • Lowrance electronic 10776001 - page 45

    42 | | 43 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch V iewing sonar hist or y Y ou can view sonar histor y by ac tivating the cursor and then dragging your finger horizontally acr oss the screen. Whenever the cursor is activated on the sonar page, the blue sonar history scroll bar will appear at the bottom of the screen. The ...

  • Lowrance electronic 10776001 - page 46

    44 | | 45 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sonar menu When the cursor is active, some featur es on the sonar menu will be replaced with cursor mode f eatures. T ap Clear cursor to return to the normal sonar menu. Range The range setting determines the water depth that is visible on the screen. T ap the range ke ys o ...

  • Lowrance electronic 10776001 - page 47

    44 | | 45 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Y ou can view t wo frequencies at the same time by selecting the sonar + sonar quicksplit combo option. Advanc ed Noise rejection Signal interference from bilge pumps , engine vibration and air bubbles can clutter the sonar screen. The noise rejection option filters the si ...

  • Lowrance electronic 10776001 - page 48

    46 | | 47 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Bytes per sounding Select how many bytes per seconds that are t o be used when sav- ing the log file. More bytes yield bett er resolution, but will cause the recorded file t o increase in size compar ed to using lower b yte settings. Log all channels Logs Br oadband and S ...

  • Lowrance electronic 10776001 - page 49

    46 | | 47 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Sensitivity Increasing Sensitivity will show more detail on the screen; decreasing Sensitivity displays less. T oo much detail will clutt er the screen. Con versely , desired echoes ma y not be displayed if Sensitivity is set too low . ¼ Note: Auto Sen sitivity is the pref ...

  • Lowrance electronic 10776001 - page 50

    48 | | 49 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch By default the zoom level is set to 2x. Y ou can select up to an 8x zoom by pressing the dedicat ed zoom keys. The range zoom bars on the right side of the display shows the range that is magnified. If you increase the z ooming factor the range will be reduced. Y ou will s ...

  • Lowrance electronic 10776001 - page 51

    48 | | 49 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Palettes Y ou can selec t from several display palettes optimiz ed for a variety of fishing conditions. T emp graph Shows a red line and a digital displa y on the sonar screen to graphically illustrate changes in water t emperature. Depth line Places a line on the bottom s ...

  • Lowrance electronic 10776001 - page 52

    50 | | 51 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Stop sonar Allows you to closely examine sonar echoes , precisely position a waypoint or stop interference between transducers on your boat. When sonar is stopped, no sonar history will be recorded . This function is also useful when using the cursor to measure a distance b ...

  • Lowrance electronic 10776001 - page 53

    50 | | 51 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Overlay Do wnscan™ Y ou can overlay a Downscan image on a normal sonar image. T ap Overlay do wnscan on the Sonar settings menu. When Overlay downscan is activated, the sonar menu will expand to include basic Structure options. T ap O verlay on the Structure options menu ...

  • Lowrance electronic 10776001 - page 54

    52 | | 53 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch Installation settings Keel o set This is a value that can be entered on the sonar Installation page to make depth readings relate to an y point from the water surface, to the deepest point of the vessel. Below are some typical ways in which the offset is used: A) F or D ...

  • Lowrance electronic 10776001 - page 55

    52 | | 53 Sonar | Lowrance HDS Gen2 T ouch Sonar | Lowrance HDS Gen2 T ouch W a ter speed calibration W ater speed calibration is used to adjust the speed value from the paddle wheel to match the actual boat speed through the water . Actual speed can be determined from GPS speed over g round (SOG) or by timing the boat over a known distance. W ater ...

  • Lowrance electronic 10776001 - page 56

    54 | | 55 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch StructureScan HD™ StructureScan HD™ uses high frequencies to pro vide a high resolu- tion, picture -like image of the bottom. ¼ Note: Y ou mu st hav e a StructureScan H D transduc er in stalled to u se Stru c tu reSc an feature s. StructureScan HD provi ...

  • Lowrance electronic 10776001 - page 57

    54 | | 55 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Acc ess hidden cont ex t menu Fr equency Data overlay Bottom Range scale Range keys DownScan Using the cursor on the S tructureScan page The cursor is by default not shown on the StructureScan page. When you tap the screen the cursor will appear . The left/r ...

  • Lowrance electronic 10776001 - page 58

    56 | | 57 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Goto cursor Y ou can navigate to the cursor by tapping Goto cursor on the menu. Saving a wa ypoint Y ou can save a waypoint at the cursor position by tapping the screen and then tapping New waypoint on the StructureScan menu. T ap S ave on the waypoint dialo ...

  • Lowrance electronic 10776001 - page 59

    56 | | 57 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch StructureScan™ menu When the cursor is active, some featur es on the StructureScan menu will be replaced with cursor mode featur es. T ap Clear cursor to return to the normal StructureScan menu. Range DownScan range controls the water depth that is visible ...

  • Lowrance electronic 10776001 - page 60

    58 | | 59 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Flipping Left/Right image If required, the left/right Sidescanning images can be flipped to match the corresponding side of your vessel . Range lines Range lines ex tend from the range scale to the other side of the screen, making it easier to estimate dept ...

  • Lowrance electronic 10776001 - page 61

    58 | | 59 StructureScan | Lowrance HDS Gen2 T ouch StructureScan | Lowrance HDS Gen2 T ouch Measuring distance The cursor can be used to measure the distance between two points on the StructureScan image. It is easier to use the measure function when the structure image is paused. ¼ Note: T he Measur e option wi ll only be vis ible on the S tructu ...

  • Lowrance electronic 10776001 - page 62

    60 | StructureMap | Lowrance HDS Gen2 T ouch StructureMap™ StructureMap™ is a tool that allows you to ov erlay SideScan sonar returns on top of the chart, giving you a birds-eye view of under wa- ter structure below and beside your boat. StructureMap makes it easier for you t o visualize the underwater environment in relation to your position a ...

  • Lowrance electronic 10776001 - page 63

    | 61 StructureMap | Lowrance HDS Gen2 T ouch Live mode Displays the last few minutes of the Side Imaging history as a trail behind the vessel icon. The length of this trail will var y depending on the Side Imaging and Down I m- aging range settings. The higher the range settings the longer the history length that will show up behind the vessel icon ...

  • Lowrance electronic 10776001 - page 64

    62 | StructureMap | Lowrance HDS Gen2 T ouch ¼ NOTE: If t here i s more than one S tructureMap of t he same area on the same SD car d, the map s will o verlap on y our scr een. If you want to ha ve mor e than one ma p of the same are a, you shou ld put the maps on sep arate SD cards. Structure options Range Controls the width of the SideScan histo ...

  • Lowrance electronic 10776001 - page 65

    | 63 StructureMap | Lowrance HDS Gen2 T ouch Palett e Several display palettes with varying degrees of color and bright- ness are available . Con trast Adjusts the brightness ratio between light and dark areas of the screen, making it easier to distinguish objects from the background. W a ter column T urns on/off the viewing of the StructureScan w ...

  • Lowrance electronic 10776001 - page 66

    64 | StructureMap | Lowrance HDS Gen2 T ouch (.smf ) files, we recommend using an SD car d when recor ding StructureMaps. T o have structure sonar log (.sl2) files automatically converted to StructureMap file format (.smf ), tap Con vert to map when complete on the Sonar Log menu . The (.sl2) file will be converted to a (.smf ) file when recor ...

  • Lowrance electronic 10776001 - page 67

    | 65 StructureMap | Lowrance HDS Gen2 T ouch Sharing les After structure sonar log (.sl2) files are conv erted to StructureMap (.smf ) files, they can be saved to a SD car d and used on other GPS capable HDS Gen 2 units without the need for the StructureScan module. Show StructureMap (.smf ) les Y ou can view Struc tureMap (.smf ) files fr ...

  • Lowrance electronic 10776001 - page 68

    66 | | 67 Instruments | Lowranc e HDS Gen2 T ouch Instruments | Lowranc e HDS Gen2 T ouch The Instrumen ts panels The Info page instrument panel consists of multiple gauges that can be customized to displa y selected data. The instrument panel dis- plays data on dashboards , and you can define up to ten dashboar ds within the instrument panel. T a ...

  • Lowrance electronic 10776001 - page 69

    66 | | 67 Instruments | Lowranc e HDS Gen2 T ouch Instruments | Lowranc e HDS Gen2 T ouch Edit an Instrument dashboard 1. Selec t the dashb oard you want to edit. 2. Ta p Edit on the Instrument pag e menu 3. T ap the gauge you want to change. The selec ted gauge w ill be shaded in blue 4. Ta p Selec t info 5. T ap a data categor y 6. T ap a data ty ...

  • Lowrance electronic 10776001 - page 70

    68 | | PB Video | L owrance HDS Gen2 T ouch Video | L owrance HDS Gen2 T ouch Using Video (9” and 12” units only) The video function allows you to view videos or camera sources on your unit’ s screen. F or information about how t o connect the camera, see the separate Installation manual. T ap the V ideo icon on the homescreen to access the V ...

  • Lowrance electronic 10776001 - page 71

    | 69 Alarms | Lowr ance HDS Gen2 T ouch The A larm sy stem This unit will continuously check for danger ous situations and system faults while the system is running . When an alarm situation occurs, an alarm message will pop up on the screen. If you have enabled the siren, the alarm message will be f ollowed by an audible alarm. The alarm is record ...

  • Lowrance electronic 10776001 - page 72

    70 | Alarms | Lowr ance HDS Gen2 T ouch T ype of messages The messages are classified accor ding to how the reported situation will affect your vessel . The f ollowing color codes are used: Color Impor tance Red Critical Orange Impor tant Y ellow Standard Blue W arning Green Light warning Single alarms A single alarm is displayed with the name of ...

  • Lowrance electronic 10776001 - page 73

    | 71 Alarms | Lowr ance HDS Gen2 T ouch Acknowledging an alarm The following options ar e available in the alarm dialog for acknowledging a message: Option Result Close Sets the alarm state to acknowledged, meaning that you are awar e of the alarm condition. The siren will st op and the alarm dialog will be removed . The alarm will however remain a ...

  • Lowrance electronic 10776001 - page 74

    72 | Utilities | Lowranc e HDS Gen2 T ouch Utilities The Utilities tab includes options and tools that are not specific to any page. Utilities ar e accessed from the homescreen. T apping a utility will open a dialog giving you access to available options for the selected item. When you selec t a utility, a dialog will open on top of your previous ...

  • Lowrance electronic 10776001 - page 75

    | 73 Utilities | Lowranc e HDS Gen2 T ouch Sun/moon Displays sunrise, sunset, moonrise and moonset for a position based on entered date and the position ’ s latitude/long itude. T rip Calcula tor T rip 1/ T rip 2 Displays voyage and eng ine information, with reset option f or all data fields. To d a y Displays voyage inf ormation for the current ...

  • Lowrance electronic 10776001 - page 76

    74 | Utilities | Lowranc e HDS Gen2 T ouch T ides Displays tide information f or the tide station nearest to y our vessel. T ap the arrow panel buttons to change date , or tap the date field to access the calender function. Available tide stations can be selected from the menu . Satellites Status page for active satellites . W AAS (and EGNOS) di? ...

  • Lowrance electronic 10776001 - page 77

    | 75 Utilities | Lowranc e HDS Gen2 T ouch Cop ying les to SD card Y ou can copy screenshots and logs to a SD card . Y ou can also export system settings and waypoints, r outes and trails to a SD car d. Ex- por ting files is covered in the Maintenance section. Copying all les ...

  • Lowrance electronic 10776001 - page 78

    76 | Utilities | Lowranc e HDS Gen2 T ouch PDF reader Use the PDF viewer to read manuals and other PDF files on the HDS display . The manuals can be read from an inserted SD card or from the unit ’ s internal memor y. Settings Opens the system settings menu. ...

  • Lowrance electronic 10776001 - page 79

    | 77 System Settings | L owrance HDS Gen2 T ouch S y stem Settings Changing sy stem settings The system settings pro vides access to advanced settings for y our system and determines the way your system displa ys various user inter face information on the display . Language Controls the language used on this unit f or pages, menus and dialogs. Chan ...

  • Lowrance electronic 10776001 - page 80

    78 | System Settings | L owrance HDS Gen2 T ouch Coor dinate sy stem Defines the coordinate system used when position coor dinates are entered and display ed. Magnetic variation Magnetic variation is the difference between true bearings and magnetic bearings, caused by diff erent location of the Geographic and the Magnetic nor th poles. Any loca ...

  • Lowrance electronic 10776001 - page 81

    | 79 Simulator | Lowr ance HDS Gen2 T ouch Using the simula tor Simulator mode The simulation featur e will let you see how the unit works in a stationar y position and without being connected to the sonar , GPS, radar , etc . Y ou can use the simulator to help you become familiar with your unit befor e using it out on the water . When the simulato ...

  • Lowrance electronic 10776001 - page 82

    80 | Simulator | Lowr ance HDS Gen2 T ouch Adv anced simula tor settings The advanced simulator settings allow you t o define how to run the simulator . When the settings are sa ved these will be used as default when star ting the simulator mode. GPS source Selects the source where simulated GPS data is generated . Speed, Course and Rout e Used to ...

  • Lowrance electronic 10776001 - page 83

    | 81 Radar | Lowrance HDS Gen2 T ouch Using the r adar (optional) The radar page can be set up as a full screen view or combined with other pages. The radar image can also be displayed as an ov erlay to existing 2D char t views and 3D for Navionics . Refer to “Char t overlay ” on page 26. ¼ Note: Radar overla y requi res da ta from headi ng se ...

  • Lowrance electronic 10776001 - page 84

    82 | Radar | Lowrance HDS Gen2 T ouch Adjusting r ange Y ou can use the zoom keys on the touchscreen or the dedicated zoom keys on the front of the unit to adjust the radar range. Using the cursor on the r adar page The cursor is by default not shown on the radar image. When you tap the radar page the cursor and the cursor position window will be a ...

  • Lowrance electronic 10776001 - page 85

    | 83 Radar | Lowrance HDS Gen2 T ouch Measuring range and bearing to a tar get Range rings The range rings are displayed at pr eset distances from the vessel based on the radar range. Y ou can use the range ring to estimate the distance to a radar echo. Radar menu When the cursor is active, some featur es on the radar menu will be replaced with cur ...

  • Lowrance electronic 10776001 - page 86

    84 | Radar | Lowrance HDS Gen2 T ouch Rain Clutter Rain clutter is used to reduce the effect of rain, snow or other weather conditions on the radar image. Adjust the value by vertically dragging the rain clutter slide bar . The value should not be increased too much as this ma y filter out real targets . Interference rejection Inter ference could ...

  • Lowrance electronic 10776001 - page 87

    | 85 Radar | Lowrance HDS Gen2 T ouch Cent er Look ahead Cust om oset 1. Selec t the o ffset option f rom the menu 2. T ap the screen where you want to position the radar center 3. Confirm the s et ting by tapping S ave off se t on the menu. Symbology Radar symbology can be turned ON/OFF collec tively from the Radar menu, or individually as de ...

  • Lowrance electronic 10776001 - page 88

    86 | Radar | Lowrance HDS Gen2 T ouch Dening an EBL/VRM marker 1. Ensur e that the cursor is not ac tive on the ra dar page 2. T ap EBL/ VRM on th e radar menu 3. S elec t an EBL / VRM . 4. T ap adjust to selec t EBL / V RM position 5. Drag the EBL / VR M into the desir ed lo cation 6. T ap Save E BL / VRM Quick EBL/VRM marker positioning by usi ...

  • Lowrance electronic 10776001 - page 89

    | 87 Radar | Lowrance HDS Gen2 T ouch Dening a guard zone 1. T ap Guard Zone on the ra dar menu 2. T ap one of the guard zones 3. Ta p Adjust and t ap and drag on th e screen to position the guard zon e 4. S ave the position by tapping S ave guard z one on the menu. Sensitivity The guard zone sensitivity can be adjusted to eliminat e alarms for ...

  • Lowrance electronic 10776001 - page 90

    88 | Radar | Lowrance HDS Gen2 T ouch ST C curve The ST C (Sensitivity Time Control) contr ols the sensitivity of the radar signal close to your v essel. Y our selection should be based on the current sea conditions. ¼ Note: W hen a 4G broadband radar is i nstalled, beam s harpening i s enabled, re sulti ng in 2X the azimuth r esolution — s imil ...

  • Lowrance electronic 10776001 - page 91

    | 89 Radar | Lowrance HDS Gen2 T ouch Threshold The threshold sets r equired signal str ength for the low est radar signals. Radar returns below this limit will be filter ed and not displayed. The default value is 30%. F ast scan (Broadband Radar™ only). Increases the rotation speed of the radar scanner when the range is under 2nm. This option g ...

  • Lowrance electronic 10776001 - page 92

    90 | Radar | Lowrance HDS Gen2 T ouch MARP A target symbols Y our unit uses the target symbols shown below . Symbol Description Acquiring MARP A target. Typically it takes up to 10 full rotations of the scanner T racking MARP A target, not moving or at anchor . T racking and safe MARP A target with extension lines. Dangerous M ARP A target. A targe ...

  • Lowrance electronic 10776001 - page 93

    | 91 Radar | Lowrance HDS Gen2 T ouch V iewing target inf ormation T ap the desired target and then tap T arget details on the radar menu. MARP A target settings Several vessel settings define alarm limits and how the targets are displayed on your radar image . T arget trails and safe rings Y ou can define the length of the MARP A trail mak ing i ...

  • Lowrance electronic 10776001 - page 94

    92 | Radar | Lowrance HDS Gen2 T ouch your vessel comes within this distance fr om a vessel, the symbol will change to the “ dangerous” target symbol. An alarm will be triggered if activated in the Alarm settings panel. V essel alarm settings Y ou can define several V essels alarms to alert you if a target comes within predefined range limits ...

  • Lowrance electronic 10776001 - page 95

    | 93 Radar | Lowrance HDS Gen2 T ouch Radar installation menu Setup and configuration of the Broadband radar has been simplified compared to traditional pulse radars . Ther e is no zero range (time delay), no warm up time, and no burn-in required . Radar status Displays scanner information, the availability and status of scanner featur es, and th ...

  • Lowrance electronic 10776001 - page 96

    94 | Radar | Lowrance HDS Gen2 T ouch Occasionally false target returns can occur adjacent to strong tar get returns such as large boats or container ports. This occurs because not all of the transmitted radar energy can be f ocused into a single beam by the radar antenna, a small amount energy is transmitt ed in other directions. This energy is re ...

  • Lowrance electronic 10776001 - page 97

    | 95 AIS | Lowranc e HDS Gen2 T ouch Using AIS The marine Automatic Identification System ( AIS) is a location and vessel information r epor ting system. It allows vessels equipped with AIS to automatically and dynamically share and r egularly update their position, speed, course and other inf ormation such as vessel identity with similarly equipp ...

  • Lowrance electronic 10776001 - page 98

    96 | AIS | Lowranc e HDS Gen2 T ouch Lost AIS tar get. When no signals have been r eceived within a time limit a target will be defined as lost. The target symbol repr esents the last valid position of the target befor e the reception of data was lost. Selected AIS target, activated by tapping on a target symbol. The target will return to default ...

  • Lowrance electronic 10776001 - page 99

    | 97 AIS | Lowranc e HDS Gen2 T ouch V essel alarms Y ou can define several alarms to aler t you if a target comes within predefined range limits, or if a pr eviously identified target is lost. V es- sel alarms can be set up from the Alarms utility. Alarm ID Description Dangerous vessel Controls whether an alarm shall be activated when a vessel ...

  • Lowrance electronic 10776001 - page 100

    98 | AIS | Lowranc e HDS Gen2 T ouch Y our v essel’ s MMSI number Y ou need to have your own MMSI (Maritime Mobile Ser vice Identit y) number entered in the system t o be able to receiv e addressed mes- sages from AIS and DSC vessels . It is also impor tant to have the MMSI number entered to a void see- ing your own vessel as an AIS tar get on th ...

  • Lowrance electronic 10776001 - page 101

    PB | | 99 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Networ king Y ou can monitor the per formance of NMEA 2000 and Ethernet networks and configure data sources, network devices, waypoint sharing and NMEA 0183 settings. Aut o congur ation After you have installed y our NMEA 2000 network , or added/re- moved a de ...

  • Lowrance electronic 10776001 - page 102

    100 | | 101 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Conguring da ta sources Devices can be configured from the Data source menu or fr om the device list. Select the device from the list and tap Configure . Sco pe Y ou can selec t the Global or Local setting f or display units and data sources on the network. ...

  • Lowrance electronic 10776001 - page 103

    100 | | 101 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Device Global Local Display units Automatically uses data from global data sources When a data source is selected by other global scope units, all units switch to same data source Data sources must be selected manually . Data source selection will not be affect ...

  • Lowrance electronic 10776001 - page 104

    102 | | 103 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch Damping accomplishes this by averag ing the data. The higher the damping level, the mor e data histor y will be averaged. A s a result, higher damping levels cause a delayed r esponse to changes in the data. Device list T ap device list to view all devices conne ...

  • Lowrance electronic 10776001 - page 105

    102 | | 103 Networking | Lowrance HDS Gen2 T ouch Networking | Lowrance HDS Gen2 T ouch SIRIUS status (US only) Y ou can view your ESN number , SIRIUS subscription status and signal strength. Y ou must have a SIRIUS weather and/or audio subscription to view SIRIUS information. NMEA 2000 T urns on/off sharing/receiving of waypoints acr oss a NMEA 2 ...

  • Lowrance electronic 10776001 - page 106

    104 | | 105 GoFr ee wireless With a WIFI-1 unit connected to an HDS unit y ou can use a wireless device to view or remotely contr ol the HDS display . Displaying HDS data on a wireless device requir es a corresponding app. P lease check the appropriate Apple or Android st ore f or your device. ¼ Note: In this documen t we ha ve used the t erm wire ...

  • Lowrance electronic 10776001 - page 107

    104 | | 105 Downloading the GoF ree app Download the Lowrance GoF r ee Controller & Viewer app to your wireless device from the Apple App Stor e or Android Google Pla y app store . Connecting the wireless devic e to the WIFI-1 Set up the wireless device ’ s net work to be the WIFI-1 defined as primar y access point. Enable/disable wireless c ...

  • Lowrance electronic 10776001 - page 108

    106 | | PB When control is confirmed, the connection will be immediately established. ¼ Note: If contr ol is r ejected the wireless devic e wil l mirr or the HDS screen, but no operati on will be allo wed from the remo te devic e . All connected wireless devices will be listed in the HDS dialog, and you can change the access level f or all connec ...

  • Lowrance electronic 10776001 - page 109

    PB | | 107 Point 1 an tenna | Lowr ance HDS Gen2 T ouch Point 1 an tenna | Lowr ance HDS Gen2 T ouch P oint 1 an tenna P oint 1 c ongura tion Enabling W AAS/MSAS/EGNOS Select W AAS/MSAS/EGNOS to use the satellite based aug mentation system (SBAS), which can increase accuracy of a GPS fix to within approximat ely 1m. W AAS covers North Amer ica, ...

  • Lowrance electronic 10776001 - page 110

    108 | | 109 Point 1 an tenna | Lowr ance HDS Gen2 T ouch Point 1 an tenna | Lowr ance HDS Gen2 T ouch C OG/SOG F ilter Averages C OG/SOG data to smooth out display ed values. The best setting will depend on the type of vessel and user prefer ence. Compass Oset Offset may be applied to correct for small errors seen in the orientation relative to ...

  • Lowrance electronic 10776001 - page 111

    108 | | 109 Point 1 an tenna | Lowr ance HDS Gen2 T ouch Point 1 an tenna | Lowr ance HDS Gen2 T ouch GNSS Congur ation The GPS and GL ONASS options may be enabled simultaneously , or individually . Generally , GPS offers the highest accuracy , but in cer tain circumstances a better fix may be achiev ed with both or only GL ONASS enabled. Cali ...

  • Lowrance electronic 10776001 - page 112

    110 | | 111 Fuel | L owranc e HDS Gen2 T ouch Fuel | L owranc e HDS Gen2 T ouch F uel The fuel utility allows your unit to calculate and monitor the o verall fuel per formance of your vessel . The F uel utilit y requires a fuel used sensor , like a Lo wrance F uel F low sensor , an engine inter face with fuel used output capability, or a L owrance ...

  • Lowrance electronic 10776001 - page 113

    110 | | 111 Fuel | L owranc e HDS Gen2 T ouch Fuel | L owranc e HDS Gen2 T ouch Calibration If you need to calibrate a tank, fill the tank , tap the Set to full checkbox, and proceed to tank calibration. If you add fuel, but do not fill the tank, you must enter the amount of fuel added to the tank to ensure the accuracy of fuel economy calculatio ...

  • Lowrance electronic 10776001 - page 114

    112 | W eather | Lowr ance HDS Gen2 T ouch SIRIUS™ w eather (Nor th America only) When connected to a Navico W eather Module, you can subscribe and include SIRIUS™ audio and SIRIUS™ Marine W eather Service on your system (North America only). SIRIUS™ audio and weather service covers inland US waters and coastal areas into the Atlantic and P ...

  • Lowrance electronic 10776001 - page 115

    | 113 W eather | Lowr ance HDS Gen2 T ouch SST color bar Pr ecipitation color shading SST color shading Storm ic ons Wind bar bs City forec ast icon Showing detailed w eather inf ormation When you tap a shaded weather ar ea, available information will be shown in the cursor window . When you tap a weather icon, detailed inf ormation about the obser ...

  • Lowrance electronic 10776001 - page 116

    114 | W eather | Lowr ance HDS Gen2 T ouch Sea sur face temperatur e (SST ) Can be shown as color shading or text. When color coding is selected, the SST color bar will be shown on the left side of the display . Y ou can define which temperature range that shall be color coded as described later in this section. W a ve indica tion Colors are used ...

  • Lowrance electronic 10776001 - page 117

    | 115 W eather | Lowr ance HDS Gen2 T ouch Icon Description City forecast Sur face obser vation T ropical st orm track ing; past (grey) - pr esent (red) - future (y ellow) Hurricane (categor y 1-5) track ing; past (grey) - present (r ed) - future (yello w) T r opical disturbance/depression tracking; past (grey) - present (red) - futur e (yellow) St ...

  • Lowrance electronic 10776001 - page 118

    116 | W eather | Lowr ance HDS Gen2 T ouch A watchbox is defined by the National Weather Ser vice. When the alarm is turned on you will get an alarm if your vessel is inside or moves into a watchbo x. Access the Alarms utility to set up weather alarms. W eather repor ts Marine zones SIRIUS™ ser vice includes access to weather reports for all U . ...

  • Lowrance electronic 10776001 - page 119

    | 117 W eather | Lowr ance HDS Gen2 T ouch Animating SIRIUS™ w eather gr aphics This unit recor ds the weather information you ha ve turned on, and this information can be used to animate past or futur e weather con- ditions. The amount of information available in the system depends on the amount of weather activity,- the mor e complex it is the ...

  • Lowrance electronic 10776001 - page 120

    118 | Audio | Lo wrance HDS Gen2 T ouch A udio When this unit is connected to a SonicHub ser ver you can use your unit to control audio playback fr om iP od, iPhone , USB mass storage device (mp3) and AM/FM radio . Bef ore playing F M radio through the SonicHub, you must pur chase a marine -grade AM/FM antenna. When connected to a L WX Satellite mo ...

  • Lowrance electronic 10776001 - page 121

    | 119 Audio | Lo wrance HDS Gen2 T ouch Operating the audio sour ce Selec ting the audio source Y ou switch between available audio sources from the Source menu . ¼ Note: T he Mic sourc e select s a high voltage lev el input al lowing y ou to br oadcast loud hailer messages o ver the aud io system. Adjusting the v olume The volume is adjusted by p ...

  • Lowrance electronic 10776001 - page 122

    120 | Audio | Lo wrance HDS Gen2 T ouch Shue and repeat Shuffle and repeat are turned on/off fr om the audio menu. The icons will be blue when the function is turned on. The pla yback menu The playback menus includes an option giving access to the source ’ s native menu or file structure, used f or selecting tracks. Using the AM/F M r adio S ...

  • Lowrance electronic 10776001 - page 123

    | 121 Audio | Lo wrance HDS Gen2 T ouch Saving a channel to the fav orite list When the channel is tuned in, you can add the stations to your fav orite list. All favorite channels can be viewed , selected and deleted from within this list. Using SIRIUS r adio The channels list The channels list displays all available SIRIUS channels , whether or no ...

  • Lowrance electronic 10776001 - page 124

    122 | Audio | Lo wrance HDS Gen2 T ouch Locking channels Y ou can lock selec ted SIRIUS channels from being br oadcast unless an unlock code is entered . When the function is activated, a 4 digit code must be entered befor e the locking is ac tivated. The same code must be entered bef ore a locked channel can be released. Mixer Y ou can mak e adjus ...

  • Lowrance electronic 10776001 - page 125

    | 123 Maintenance | Lo wrance HDS Gen2 T ouch Maintenanc e Pre v entiv e maintenanc e The unit does not contain any field serviceable components, there- for e the operator is requir ed to per form only a very limited amount of preventative maint enance. It is recommended that you always fit the supplied protective sun cover when the unit is not i ...

  • Lowrance electronic 10776001 - page 126

    124 | Maintenance | Lo wrance HDS Gen2 T ouch Sof tware upgrades The latest software for this unit will be available f or download fr om our web site; www .lowrance.com Detailed instructions for how to install the software will follow the upgrade files. F or more details about software upgrades , ref er to the separate Installation manual. T roubl ...

  • Lowrance electronic 10776001 - page 127

    | 125 Maintenance | Lo wrance HDS Gen2 T ouch Expor ting waypoints , routes and tr ails 1. Acc ess the Files utilit y 2. Ta p Wa ypoints, Routes and T rails database 3. Ta p Expor t 4. S elec t the d esired file format 5. Selec t des tination folder 6. Enter a name for exp or ted file 7. Ta p Enter ¼ Note: T o expor t waypoints, rout es and trai ...

  • Lowrance electronic 10776001 - page 128

    126 | Maintenance | Lo wrance HDS Gen2 T ouch Export region The example shows how to export waypoints, rout es and trails from a par ticular region. 1. Acc ess the Files utilit y 2. Ta p Wa ypoints, Routes and T rails database 3. Ta p Expor t region 4. D rag the re d boundar y box around the desired region 5. Ta p Ex port 6. S elec t the d esired ? ...

  • Lowrance electronic 10776001 - page 129

    PB | | 127 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch A AIS Dening dangerous vessels 98 F iltering targets 98 MMSI number 98 Selecting targets 96 T arget information 96 V essel alarms 97 V essels extension lines 98 Alarms Acknowledge 71 Active alarms 73 Alarm history 73 Alarm settings 73 Message types 70 Audio AM/FM r ad ...

  • Lowrance electronic 10776001 - page 130

    128 | | 129 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch F ishing modes Reset shing mode 51 F uel F ind fuel 111 F uel used 111 Refueling 110 Calibration 111 V essel setup 110 G GoFr ee wireless 104, 107 Connecting to the WIFI-1 105 Downloading GoFr ee app 105 Enabling control of HDS 105 Operating HDS 106 Operating the HDS ...

  • Lowrance electronic 10776001 - page 131

    128 | | 129 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch Safety depth 31 Shading 29 Shallow water highligh ting 30 Synchronize 2D/3D chart 28 Networking Auto congur ation 99 Damping 101 Data sources 99 Conguring 100 New 101 Remove 101 Renaming a data source 101 Device List Calibrating devices 102 Diagnostics 102 Etherne ...

  • Lowrance electronic 10776001 - page 132

    130 | | 131 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch Restore defaults 94 Sea clutter 83 Sidelobe suppression 93 ST C cur ve 88 Symbology 85 T arget expansion 87 T arget trails 88 Threshold 89 V essel alarm settings 92 Restore defaults 78 Routes Create fr om chart 34 Create fr om waypoints 35 Editing 35 S Satellites 74 Scr ...

  • Lowrance electronic 10776001 - page 133

    130 | | 131 Index | Lowranc e HDS Gen2 T ouch Index | Lowranc e HDS Gen2 T ouch Measuring distance 59 Networking 59 Noise Rejection 57 P alette 58 P ausing sonar 59 Pr eset range levels 57 Range 57 Stop sonar 59 Sur face clarity 57 View Downscan 58 Sidescan 58 Viewing history 56 System settings 77 Advanced 78 Coordinat e system 78 Datum 77 Key beep ...

  • Lowrance electronic 10776001 - page 134

    Navico Databases License A greement THIS IS A LEGAL AGREEMENT B E T WEEN T HE END -USER WHO FIRST PURCHA SES THIS PROD UC T AS A CONSUMER ITEM FO R PERSONAL, FAMIL Y , OR HOUSEHOLD USE ("YOU") AND NAVICO , THE MANUF ACT URER OF T HIS PRODUC T ( " WE" , "OUR", OR "US "). US ING THE PRO DUC T AC C OMP ANIED B Y ...

  • Lowrance electronic 10776001 - page 135

    Databases Limited Warran ty “ We” , “our ” , or “u s” refers to Navi co, the manuf ac turer o f this produ c t. “ Y ou” or “your ” refer s to the firs t pe rson w ho purchas es the p roduc t as a consum er item for pe rson al, famil y , or hous ehol d use. Th e Databa ses Limi ted Warrant y a pplie s to the one o r more data ba ...

  • Lowrance electronic 10776001 - page 136

    ...

  • Lowrance electronic 10776001 - page 137

    *988-10312-002* ...

Manufacturer Lowrance electronic Category GPS Receiver

Documents that we receive from a manufacturer of a Lowrance electronic 10776001 can be divided into several groups. They are, among others:
- Lowrance electronic technical drawings
- 10776001 manuals
- Lowrance electronic product data sheets
- information booklets
- or energy labels Lowrance electronic 10776001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Lowrance electronic 10776001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Lowrance electronic 10776001, service manual, brief instructions and user manuals Lowrance electronic 10776001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Lowrance electronic 10776001.

Similar manuals

A complete manual for the device Lowrance electronic 10776001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Lowrance electronic 10776001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Lowrance electronic 10776001.

A complete Lowrance electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Lowrance electronic 10776001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Lowrance electronic 10776001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Lowrance electronic 10776001, that we can find in the current document
3. Tips how to use the basic functions of the device Lowrance electronic 10776001 - which should help us in our first steps of using Lowrance electronic 10776001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Lowrance electronic 10776001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Lowrance electronic 10776001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Lowrance electronic 10776001?

Use the form below

If you did not solve your problem by using a manual Lowrance electronic 10776001, ask a question using the form below. If a user had a similar problem with Lowrance electronic 10776001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)