English dropdown-ico

Manual Buffalo TeraStation 5200 NVR

228 pages Not applicable
Download

Go to site of 228

Summary
  • Buffalo TeraStation 5200 NVR - page 1

    T eraSta tion 5000 and 5000N U ser Manual Americas: www .buf faloamericas.com Europe: www .buf falo-technology .com Asia Pacific: www .buf falo-asia.com 35020018-12 2015.07 ...

  • Buffalo TeraStation 5200 NVR - page 2

    1 C on tents Chapter 1 Installa tion ..................................................... 9 Diagrams ........................................................................................... 9 T urning the T eraS tation On and Off............................................. 12 Changing the A dministra tor P asswor d ............................ ...

  • Buffalo TeraStation 5200 NVR - page 3

    2 Chapter 4 Managing St orage...................................... 39 RAID Arra y s .................................................................................... 39 W orking with R AID Arr ay s ............................................................ 40 Using JBOD ......................................................................... ...

  • Buffalo TeraStation 5200 NVR - page 4

    3 Deleting V olumes ..................................................................................... 78 Hard Driv e Replacemen t .............................................................. 80 Hard Driv e Replacement Examples ........................................................ 81 Chapter 5 Backup ........................................ ...

  • Buffalo TeraStation 5200 NVR - page 5

    4 Chapter 7 BitT orrent .................................................. 119 Chapter 8 Multimedia ............................................... 122 DLNA ............................................................................................ 122 Playing F iles ................................................................................. ...

  • Buffalo TeraStation 5200 NVR - page 6

    5 Client T ools .................................................................................. 151 Camer a P olicies ...................................................................................... 151 Live V iewer ............................................................................................. 151 Data Service P olicies .... ...

  • Buffalo TeraStation 5200 NVR - page 7

    6 P or t T runking ............................................................................... 176 C onfiguring Port T runk ing .................................................................... 177 C onnec ting a Prin ter ................................................................... 178 Setting Up a Printer with W indow s 8.1, Windo ws ...

  • Buffalo TeraStation 5200 NVR - page 8

    7 Updating the F irm war e ............................................................... 199 Updating Manually ................................................................................ 199 Updating A utomatically ........................................................................ 199 Name , Date , T ime , and Language ................ ...

  • Buffalo TeraStation 5200 NVR - page 9

    8 Specifications .............................................................................. 223 Chapter 13 Regula tor y C ompliance Informa tion .... 225 F or C ustomers in the United S tates ........................................... 225 F or C ustomers in E urope ............................................................ 225 F or C ustomer ...

  • Buffalo TeraStation 5200 NVR - page 10

    9 Chapter 1 Installa tion Diagrams TS5800D , TS5800DN, TS5800DWR ± ¶ · ¸ ² ³ ´ µ ±µ ¹ ±° ±± ±² ±³ ±´ ±µ ±¶ ±· ±¸ ±¹ ²° ²± ²´ ²µ TS5600D , TS5600DN ±° ±± ±² ± ¶ · ¸ ² ³ ´ µ ±µ ¹ ±³ ±´ ±µ ±¶ ±· ±¸ ±¹ ²° ²± ²´ ²µ ...

  • Buffalo TeraStation 5200 NVR - page 11

    10 TS5400D , TS5400DN, TS5400DWR ±° ± ¶ · ¸ ¹ ±± ±² ² ³ ´ µ ±¹ ²° ²± ±³ ±´ ±µ ±¶ ±· ±¸ ²´ ²µ TS5200D , TS5200DN, TS5200DS, TS5200D WR ±° ± ² ³ ´ µ ¶ · ¸ ¹ ±± ±² ±¹ ±³ ±´ ±µ ±¶ ±· ²± ±¸ ²° ²´ ²µ TS5400R, TS5400RH, T S5400RN, TS5400RWR ²´ ²µ ±° ± ²³ ´ µ¶ ·¸ ±± ? ...

  • Buffalo TeraStation 5200 NVR - page 12

    11 T o power on, connect the power cable and w ait for 10 seconds , then press the power butt on. T o power off , press the pow er button twice. 2 Info LED If there is a status message, the amber inf o LED will light up. Check the L CD panel to see the status message. 3 Error LED If there is an error , the red error LED will light up . Check the L ...

  • Buffalo TeraStation 5200 NVR - page 13

    12 This second Ethernet port may be used for network redundancy or backup. Y ou may connect a second T eraStation directly to this port for backup. 19 Po wer C onnector Use the included power cable t o connect to an UPS, surge protector , or outlet. 20 Fa n Do not block the fan. 21 Anti- Theft Securit y Slot Use this slot to secure y our T eraStati ...

  • Buffalo TeraStation 5200 NVR - page 14

    13 2 Right-click your T eraStation's icon and select Settings . F or Mac OS, select the T eraStation's icon while holding down the contr ol key , then select Settings . 3 Enter the username and passwor d, then click OK . Note: The default username and passwor d are "admin" and "passwor d" . ...

  • Buffalo TeraStation 5200 NVR - page 15

    14 4 Settings will open. 5 Click at the top-right of Settings and choose either Restar t or Shut Down . When all the LEDs on the front of the T eraStation turn off, the shut down process is c omplete. Changing the A dministra tor P assw ord After initial setup , follow this proc edure to change your passw ord. 1 Double -click the icon to start NAS ...

  • Buffalo TeraStation 5200 NVR - page 16

    15 2 Right-click on your T eraStation's icon and select Settings . On the Mac, select the T eraStation's icon while holding down the contr ol key , then select Settings . 3 Click Easy Admin . 4 Click Change Passw ord . ...

  • Buffalo TeraStation 5200 NVR - page 17

    16 5 If this screen is displayed , enter the current passw ord and click OK . The default passw ord is "passwor d" . 6 Enter the new passwor d (twice) and click Next . 7 Click OK . Y ou have changed the admin passwor d. Crea ting a Reco v er y Driv e T o initialize all of the T eraStation's settings, or just rest ore the admin passwo ...

  • Buffalo TeraStation 5200 NVR - page 18

    17 1 Inser t a 1 GB or larger USB flash drive int o a USB por t on the T eraSta tion. Note: All data on the USB flash drive will be erased! 2 In Settings, navigate to Management - Restor e/Erase - USB Options . 3 Select Create a USB drive for initializing settings . 4 Select the USB memor y device from "T arget USB drive" , then click Exe ...

  • Buffalo TeraStation 5200 NVR - page 19

    18 Chapter 2 C onfigura tion Configure and manage y our T eraStation using the Settings inter face, ac cessible from a bro wser window . Open the interface using the procedure below or type the T eraSta tion's IP address in the URL field of your br owser . Within Settings, the Easy Admin page giv es you quick access t o commonly used settings. ...

  • Buffalo TeraStation 5200 NVR - page 20

    19 3 Enter the username and passwor d and click OK . Notes: • If the time -out period is set to "10 minutes" , you will be logged out of Settings after 10 minutes of inactivity. • Click Secure Connection to log in with an encrypted connection. 4 Settings will open. Notes: • Username/P assword C ombinations: Username P asswo ...

  • Buffalo TeraStation 5200 NVR - page 21

    20 • Click to open Easy Admin. • Click to play a tone fr om the T eraStation for easy location. • Y ou can also use Bonjour to log in to Settings from OS X 10.4 or later . I n Safari, click View - Show Bookmarks Bar . F rom Bookmarks, click Bonjour - T er aStation name . Opening Easy Admin The Easy Admin page makes it easy to change ...

  • Buffalo TeraStation 5200 NVR - page 22

    21 3 Click Easy Admin . 4 The Easy Admin scr een will open. Notes: • If you click any buttons , y ou will need to enter a username and passwor d. • In Advanced Settings, click the icon a t the top left to open Easy Admin. ...

  • Buffalo TeraStation 5200 NVR - page 23

    22 Chapter 3 A cc ess Restric tions Y ou may restrict access to specific shar ed folders, including e xternal USB drives. Notes: • Access r estrictions can be set separately for each shared f older , but not for folders within the shared f olders. • Configure ac cess restrictions through Settings. Configuring acc ess restrictions through ...

  • Buffalo TeraStation 5200 NVR - page 24

    23 4 Configure the desir ed settings, then click OK . Notes: • Names may contain up to 27 alphanumeric characters , hyphens (-), and underscor es (_). Do not use a symbol as the first character in a name. • The description may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces. Do not use a symbol or spac ...

  • Buffalo TeraStation 5200 NVR - page 25

    24 • The follo wing characters are handled differ ently by Mac OS and Windo ws. A void using these characters when sharing data between Mac OS and Window s: • Window s does not suppor t some characters that Mac OS and the T eraStation allow . If you creat e a filename on a Mac with any of the follo wing characters, it will not display cor ...

  • Buffalo TeraStation 5200 NVR - page 26

    25 Recycle Bin T o protect your data from ac cidental deletion, you may c onfigure your T eraStation to use a recycle bin instead of deleting files immediately . The r ecycle bin will only work with SMB connections. T o empt y the recycle bin, click F ile Sharing - F older Setup - Empty Rec ycle Bin in Settings. Notes: • Y ou can preven t gues ...

  • Buffalo TeraStation 5200 NVR - page 27

    26 4 Enter the desired settings , then click OK . Notes: • Usernames may contain up t o 128 characters, including hyphens (-), underscor es (_), periods (.), !, #, &, @, $, *, ^, and %. Do not use a symbol as the first character . • The user ID should be a number from 1000 to 1999. Each user ID should be unique . If this field is left ...

  • Buffalo TeraStation 5200 NVR - page 28

    27 username2,password2,commen t2 username3,password3,commen t3 Guidelines: • Use commas (,) as separators. Do not put spaces bef ore or after commas. • I f a line has an incorrect format, the user on tha t line will not be register ed. • I f a username exists, the new user inf ormation will overwrite the old information. • Do no ...

  • Buffalo TeraStation 5200 NVR - page 29

    28 4 Enter settings, then click OK . Notes: • Group names may con tain up to 20 alphanumeric characters, hyphens (-), undersc ores (_), and periods (.). Do not use a symbol other than an underscore (_) as the first character . • Group descriptions may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces. Do ...

  • Buffalo TeraStation 5200 NVR - page 30

    29 C onfiguring A cc ess Restric tions Local Users and Gr oups 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder tha t you want to set acc ess restrictions for . 4 Click Edit . 5 Enable " Access Restrictions" . 6 Select the level of access for the user or gr oup you added. ...

  • Buffalo TeraStation 5200 NVR - page 31

    30 : Read and write access allow ed : Read access allowed : Access pr ohibited 7 Click OK . Notes: • The example abov e shows access r estriction by user . T o restrict access b y group , click the L ocal Groups tab and select group permissions. • If both read-only and read & write permissions are given to a user , the user will have ...

  • Buffalo TeraStation 5200 NVR - page 32

    31 4 Select " Active Dir ector y" , then click Nex t . 5 Click Ye s . 6 Enter the desired settings , then click OK . 7 Click to the right of "F older Setup" . ...

  • Buffalo TeraStation 5200 NVR - page 33

    32 8 Click a shared folder tha t you want to set acc ess restrictions for . 9 Click Edit . 10 Enable " Access Restrictions" . 11 Selec t the level of ac cess for the user or gr oup. : Read and write access allow ed : Read access allowed : Access pr ohibited 12 Click OK . Notes: • T o have the T eraStation join an Active Directory dom ...

  • Buffalo TeraStation 5200 NVR - page 34

    33 • Don't disable the SMB protocol while Active Directory is used for access restrictions. If you do , you will need to enable SMB again and reconfigur e AD from scratch. NT Domain In an NT domain environment, the T eraStation uses account inf ormation from the NT domain server to set access restrictions for files and folders on the T er ...

  • Buffalo TeraStation 5200 NVR - page 35

    34 7 Enter settings and click OK . 8 Click to the right of "F older Setup" . 9 Click a shared folder f or which you want t o set access restrictions. 10 Click Edit . 11 Enable " Access Restrictions" . 12 Selec t the level of ac cess for "Domain Users" or "Domain Groups" y ou added. : Read and write access all ...

  • Buffalo TeraStation 5200 NVR - page 36

    35 Notes: • If you change the T eraStation's name, you will no longer be able t o use domain users and groups or access restrictions. T o repair this, rejoin the domain. • If both read-only and read & write permissions are given to a user , the user will have r ead-only access. • If a domain username is more than 20 bytes lo ...

  • Buffalo TeraStation 5200 NVR - page 37

    36 4 Select " W orkgroup " and click Next . 5 If a prompt appears, click Ye s . 6 Enter a workgr oup name. Select " Assign authorization to external SMB ser ver" and enter the SMB server's IP address. Y ou can also specify a ser ver fr om another subnet. 7 If " Automatic user registration " is checked, users that ...

  • Buffalo TeraStation 5200 NVR - page 38

    37 information (including passwor ds) will be remov ed from the NAS. External users cannot be reverted to local users. 10 Click to the right of "F older Setup" . 11 Click a shared folder to set ac cess restrictions on. 12 Click Edit . 13 Enable " Access Restrictions" . 14 Click on the External Users tab and selec t the level of ...

  • Buffalo TeraStation 5200 NVR - page 39

    38 • If using a Windows PC f or external authentication, the default Windo ws SMB security settings may need to be changed. An easy wa y to do this is to run the F ile Sharing Security Level Change T ool, available from this product's download page on the Buffalo website . This utility will let you easily change or r estore your Window s ...

  • Buffalo TeraStation 5200 NVR - page 40

    39 Chapter 4 Managing St or age RAID Arra y s T eraStations support many types of RAID. The type of RAID ar ray s available for use depends on ho w many drives ar e installed in your T eraSta tion. T eraStation Default RAID Mode TS5800D , TS5800DN, TS5800DWR TS5600D , TS5600DN TS5400D , TS5400DN, TS5400DWR TS5400R, TS5400RH, TS5400RN, TS5400RWR RAI ...

  • Buffalo TeraStation 5200 NVR - page 41

    40 RAID 5 * RAID 5 arrays are a vailable for T eraStations with 3 or more hard drives . RAID 5 combines 3 or more drives into a single array . The usable space is equal to the sum of the capacity of the hard drives minus the capacity of one drive. F or example, if 4 drives ar e combined into a RAID 5 array , the usable space is the sum of 3 drives. ...

  • Buffalo TeraStation 5200 NVR - page 42

    41 Using JBOD With JBOD , each hard drive in the T eraStation is addressed separa tely . T o put drives fr om an array into JBOD , follow the steps below . 1 In Settings, click Drives . 2 Click to the right of "RAID" . 3 Click the array to delete . 4 Click Delete RAID Array . Once JBOD is configured , create shar ed folders on each drive ...

  • Buffalo TeraStation 5200 NVR - page 43

    42 3 Click the array to delete . Note: If the "RAID Mode" field is blank , the array is alr eady in JBOD . Proc eed to step 7. 4 Click Delete RAID Array . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK . 7 Choose a RAID array . 8 Select a RAID mode and the dr ives t o be ...

  • Buffalo TeraStation 5200 NVR - page 44

    43 9 Step through the wizar d to create the arra y . Notes: • Y ou can also configure RAID settings from Easy A dmin. • After changing the RAID mode, cr eate a shared f older . C onfiguring a Hot Spare If you have a hot spar e configured and an array fails , the T eraStation immediately switches over t o the hot spare. T o use a hot spare ...

  • Buffalo TeraStation 5200 NVR - page 45

    44 (3) Click Rediscover Disk . (4) Navigate to Driv es - RAID . (5) Choose the RAID array to repair . (6) Click the drive that was previously c onfigured as a hot spare , then click "Recover RAID Array" . This will rebuild the RAID array . RMM (RAID Mode M anager) With RMM, y ou can create or expand a RAID array without er asing the data ...

  • Buffalo TeraStation 5200 NVR - page 46

    45 5 Check " Add a disk to RAID array with RMM. Y our data will be preser ved . " . 6 Select the drive whose data will be saved from the dr op- down menu. 7 Select the drive to add to the RAID array . 8 Click Create RAID Array . 9 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . Adding ...

  • Buffalo TeraStation 5200 NVR - page 47

    46 3 Choose a RAID array . 4 Select the drive to add to the RAID array . 5 Click Create RAID Array . 6 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . Changing the RAID Mode While A dding a Drive Select the drive you want to add to the RAID array and choose the mode f or the array . Enter the &q ...

  • Buffalo TeraStation 5200 NVR - page 48

    47 1 In Settings, click Drives . 2 Move the RAID scanning switch to the position to enable RAID scanning. 3 Click to the right of "RAID Scanning" . 4 Click Edit . 5 Select when to run the scan and click OK . Notes: • Check "Immediately" to run RAID maintenance immediat ely . • T o stop a RAID scan, click Cancel RAID Sc ...

  • Buffalo TeraStation 5200 NVR - page 49

    48 • DUB and DIU series dr ives Supported file systems for external drives are below: • F A T32 • EX T3 • XFS • NTFS • HFS+ (read- only) Connect only one device to each USB port of the T eraStation. Some external drives with automatic power -on don' t turn on automatically when connected to the T eraStation. Use t ...

  • Buffalo TeraStation 5200 NVR - page 50

    49 3 Select the drive to dismount and click Dismount Disk . 4 When the follo wing message is displayed, it is saf e to unplug the drive . Note: T o remount the drive, unplug it and then plug it back in. Checking Drives A disk check tests the data on a drive in the T eraStation or connected via USB for integrity . Errors ar e fixed automatically . W ...

  • Buffalo TeraStation 5200 NVR - page 51

    50 3 Select the drive to test, then click Check Disk . 4 Click Check . Y ou have the option of deleting information files fr om Mac OS during the check if desired. S.M.A.R.T . S.M.A.R.T . (Self-M onitoring , Analysis, and Reporting T echnology) monitors hard drives to det ect and repor t various indicators of reliability , in the hope of anticipati ...

  • Buffalo TeraStation 5200 NVR - page 52

    51 3 Select a drive to check and click S.M.A.R. T . 4 The S.M.A.R.T . information for the drive will be displa yed. Diff erent inf ormation may be displayed depending on the brand of drives in your T eraStation. Critical attributes are display ed in bold. Attributes with curr ent value less than or equal to the threshold value ma y be significant. ...

  • Buffalo TeraStation 5200 NVR - page 53

    52 2 Select Drives to format an internal drive or USB Driv es to format an external drive. 3 Select the drive to format, then click F ormat Disk . 4 Select a format type, then click F ormat . ...

  • Buffalo TeraStation 5200 NVR - page 54

    53 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Depending on the size of your drive , the format may take sev eral minutes or several hours t o complete. "F ormatting" will be displayed on the L CD display until the format is complete . Notes: • Do not turn off or disconnec ...

  • Buffalo TeraStation 5200 NVR - page 55

    54 Encr ypting Driv es Internal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays ar e then readable only from that specific T eraStation. T o unencr ypt a drive or array , uncheck "Encryption" and format it again. Media Car tridges If configured as a media cartridge, an internal drive ca ...

  • Buffalo TeraStation 5200 NVR - page 56

    55 • If the T eraStation fails to boot after drive 1 or 2 is replac ed, remo ve any media cartridges, then replace them after the T eraStation has booted . Erase Da ta on the T er aStation C ompletely Under some circumstances , data from formatt ed drives can be recov ered. The disk erasure proc ess in this section does a much more thorough jo ...

  • Buffalo TeraStation 5200 NVR - page 57

    56 4 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 5 All data on the T eraStation will be permanently erased. Disk Quotas Y ou can set a disk quota to limit drive space f or each user or group . Y ou can also set an aler t space. If the drive space exceeds the set alert space, an email notific ...

  • Buffalo TeraStation 5200 NVR - page 58

    57 2 Click to the right of "Users" . 3 Select the user whose space will be limited. 4 Enable quotas, choose the maximum space the user will be allow ed to use, and click OK . Note: If you change the primary group, r estar t the T eraSta tion to apply the quota settings. 5 Click OK . Quotas for Groups F ollow the procedur e below to limit ...

  • Buffalo TeraStation 5200 NVR - page 59

    58 5 Click Close . 6 Click to the right of "Users" . 7 Select the user who will inherit the group quota settings. 8 Change the user's primar y group t o the group with the quota, then click OK . 9 Click OK . Size Limits If L VM is enabled , volumes can be created with maximum siz e limits. 1 In Settings, click Drives . 2 Click to the ...

  • Buffalo TeraStation 5200 NVR - page 60

    59 6 Click Edit under "NAS V olume" . 7 Click Create V olume . ...

  • Buffalo TeraStation 5200 NVR - page 61

    60 8 Configure the desir ed settings, then click OK . 9 Click OK . 10 Click Close . 11 Click Close . 12 Navigate to F ile Sharing - F older Setup . 13 Click Create F older . 14 Configure the settings. 15 Selec t the volume tha t you created and click OK . Using the T er aStation as an iSCSI De vice Introduction iSCSI is a protocol f or carr ying SC ...

  • Buffalo TeraStation 5200 NVR - page 62

    61 Installing a Connection T ool W indows XP , W indow s Server 2003 Before using an y iSCSI equipment, download and install the iSCSI connection software "Microsoft iSCSI Soft ware Initiator" from the Microsoft website . If using TS5000 series T eraStations, you can also use Buffalo iSCSI Connection T ool to c onnect to an iSCSI hard dri ...

  • Buffalo TeraStation 5200 NVR - page 63

    62 3 Select the drive or array where the volume will be cr eated and click Enable L VM on V olume . 4 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 5 Click OK . 6 Click Close . Note: If you click Show under "V olume List" , the volumes will be listed on the screen and you can see if ...

  • Buffalo TeraStation 5200 NVR - page 64

    63 9 Click Create V olume . 10 Enter a volume name, v olume description, volume, and siz e (if you enabled L VM), then click OK . The volume size tha t you specify here can be changed lat er . T o change the volume size, ref er to the "Expanding V olume Sizes" section below . 11 The "Confirm Operation " screen will open. Enter t ...

  • Buffalo TeraStation 5200 NVR - page 65

    64 2 Enter the IP address of the T eraStation into the "T arget" field and click Quick Connect . 3 Confirm if the connection is established and click Done . Connecting a volume is finished. If using the connected volume for the first time, the v olume should be formatted t o be used as a local drive. F ollow the procedur e below for f orm ...

  • Buffalo TeraStation 5200 NVR - page 66

    65 3 Right-click the disk volume that shows the status "Unallocated" and click New Simple V olume from the displayed menu . Follo w the screen to finish f ormatting. F ormatting a volume is finished. When the formatting process is complet ed, the drive will be visible as an icon in Computer or My Comput er and can be used as a normal driv ...

  • Buffalo TeraStation 5200 NVR - page 67

    66 2 Select the T eraStation name from the drop-down menu of "T arget" and click Regist er iSCSI Device . 3 Click OK . ...

  • Buffalo TeraStation 5200 NVR - page 68

    67 4 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 5 Click OK . Connecting a volume is finished. If using the connected volume for the first time, the v olume should be formatted t o be used as a local drive. F ollow the procedur e below for f ormatting. 1 In Windows , navigate t o Control P anel - A ...

  • Buffalo TeraStation 5200 NVR - page 69

    68 2 Select a volume to disconnect from the drop-down menu of " V olume" and click Disconnect . 3 Click Ye s . 4 Click OK . ...

  • Buffalo TeraStation 5200 NVR - page 70

    69 5 Select the T eraStation name from the drop-down menu of "T arget" and click Unr egister iSCSI Device . 6 Click OK . Disconnecting a volume is finished. Using with Multiple C omputers If the T eraStation is divided into multiple v olumes (or drives), it can be used with multiple computers. Ho wever , multiple computers cannot be acces ...

  • Buffalo TeraStation 5200 NVR - page 71

    70 Configuring A cc ess Restrictions for the Entire T eraSta tion 1 In Settings, click Drives . 2 Click to the right of "iSCSI" . 3 Click the Security tab. 4 Click Edit under " Access C ontrol ( T arget Discovery)" . 5 Enable access restrictions, ent er the username and password, and click OK . Note: T o enable mutual authentica ...

  • Buffalo TeraStation 5200 NVR - page 72

    71 3 In the "Discovery" tab, click Discov er Portal . 4 Enter the T eraSta tion's IP address in the "IP address or DNS name" field . 5 Click Adv anced . 6 Check "Enable CHAP log on" and enter the configur ed username to the "Name" field and password in to the "T arget secr et" field. If the mut ...

  • Buffalo TeraStation 5200 NVR - page 73

    72 3 The screen to en ter the username and password will be display ed. Enter the c onfigured username and password fr om step 5 of the "Configuring A ccess Restrictions for the Entire T eraStation" section above and click OK . If mutual authentication is enabled, check "Mutual Authen tication" , then click OK . 4 If "Mutua ...

  • Buffalo TeraStation 5200 NVR - page 74

    73 6 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 7 Click OK . Accessing the v olume on the access-restricted T eraStation is finished. Configuring A cc ess Restrictions for Individual V olumes If access restrictions are configured f or a volume, tha t volume cannot be accessed unless the username a ...

  • Buffalo TeraStation 5200 NVR - page 75

    74 4 Enable access restrictions, ent er a client IQN (optional), username, and passwor d, and click OK . Note: T o enable mutual authentication, check "Enable Mutual Authentication" in the screen abo ve and enter the mutual authentication passwor d. 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , th ...

  • Buffalo TeraStation 5200 NVR - page 76

    75 If the mutual authentication is enabled, check "P er form mutual authentica tion" . 7 Click OK twice. 8 In the " T argets" tab , select the volume from "Discov ered targets" and click Connect . 9 Click Adv anced . 10 Check "Enable CHAP log on" and enter the configur ed username into the "Name" fi ...

  • Buffalo TeraStation 5200 NVR - page 77

    76 3 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 4 The screen to en ter the username and password will be display ed. Enter the c onfigured username and password fr om step 4 of the "Configuring A ccess Restrictions for Individual V olumes" sec tion above and click OK . If mutual authenti ...

  • Buffalo TeraStation 5200 NVR - page 78

    77 5 If "Mutual Authentication" is checked , the following scr een will be displayed. En ter the mutual authentication password and click OK . 6 When authentication is successful , click OK . Accessing the ac cess-restricted volume is finished. Expanding V olume Sizes The volume size of the e xisting volumes can expand after they are crea ...

  • Buffalo TeraStation 5200 NVR - page 79

    78 4 Enter the desired v olume size to add and click OK . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK , then Close . Expanding the volume size is finished . Deleting V olumes T o delete an existing volume , follow the pr ocedure below . Note: Deleting a volume will erase all dat ...

  • Buffalo TeraStation 5200 NVR - page 80

    79 3 Select the volume to delete and click Delete V olume . 4 Confirm that the volume is c orrectly selec ted on the scr een and click OK . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK . 7 Click Close . Deleting the volume is finished. ...

  • Buffalo TeraStation 5200 NVR - page 81

    80 Hard Driv e Replacemen t Hard drives in the T eraStation show a blue status LED during normal operation. If a drive fails, its error LED will glow red. ± ² 1 Error LED Glows red if a driv e has failed. 2 Status LEDs The failed drive's status LED will be glowing a st eady red. A drive with a r ed status LED is ready to hot -swap. Notes: ? ...

  • Buffalo TeraStation 5200 NVR - page 82

    81 • Do not change the order of the hard drives in the T eraStation. F or example, pulling out drive 1 and r eplacing it with drive 2 may cause data to be c orrupted or lost. • If the L CD display does not change after a new drive is installed, click Redisc over Disk in Settings. Hard Driv e Replacemen t Examples Drive Replac ement (using ...

  • Buffalo TeraStation 5200 NVR - page 83

    82 3 Pull out the drive cartridge and remove it fr om the T eraStation. 4 Inser t the new drive into the empty slot. Slide the drive in with the locking mechanism open. ...

  • Buffalo TeraStation 5200 NVR - page 84

    83 5 Swing the lock back down until it clicks int o place. 6 Close the front co ver . 7 When the replacement har d drive is recog nized, the status LED will flash r ed and the I31 message will be displayed on the L CD panel. 8 Hold down the function button on the front of the T eraStation for 3 seconds until it beeps. F or RAID 1, 5, or 6: The T er ...

  • Buffalo TeraStation 5200 NVR - page 85

    84 F or JBOD: The drive will be f ormatted as an individual drive. Cr eate a shared f older on the drive befor e use. Drive Replac ement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto- shutdown enabled) This section describes the process of replacing a drive while the T eraStation is off . 1 Open the front co ver with the key . 2 Pu ...

  • Buffalo TeraStation 5200 NVR - page 86

    85 6 Unlock the failed drive by pushing the unlock button and swing ing the lock mechanism out. 7 Pull out the hard driv e car tridge and remo ve it from the T eraStation. 8 Inser t the new hard drive (sold separa tely) into the empty slot. Slide the drive in with the locking mechanism open. Swing the lock back down until it clicks int o place. 9 C ...

  • Buffalo TeraStation 5200 NVR - page 87

    86 Chapter 5 Backup Back Up from the T eraSta tion Y ou can back up T eraStation folders to: • A different folder on the T eraStation • Another LinkStation on the network • Another T eraStation on the network Y ou can also configure backup jobs from Easy A dmin. Pr eparing a Backup Destination F irst, configure a f older as a backup ...

  • Buffalo TeraStation 5200 NVR - page 88

    87 2 Click to the right of "Backup" . 3 Click List of LinkStations and T eraStations . ...

  • Buffalo TeraStation 5200 NVR - page 89

    88 4 Click Add under "O ff-subnet Devices" , enter the IP address of the target LinkStation or T eraStation, and click Close . If your setup meets the requirements belo w , you don't have to c onfigure these settings: • The source and target T eraStations are on the same network. • No backup password is set for the target T ...

  • Buffalo TeraStation 5200 NVR - page 90

    89 3 Click Create New Job . Note: Up to 8 backup jobs can be configured . ...

  • Buffalo TeraStation 5200 NVR - page 91

    90 4 Select backup settings such as date and time to run. The follo wing types of backup jobs may be selected: T ype F iles included Normal backup All files in the source will be backed up to the destina tion. Y ou can specify how many backup v ersions to keep from 1–400, or select "Unlimited" to keep all backups until the drive is full ...

  • Buffalo TeraStation 5200 NVR - page 92

    91 T ype F iles included Management backup Each time a backup is executed , management information is stor ed, and only files that have changed ar e copied or deleted. Da ta is retrieved from the previous backup file for files that w ere not changed. This is useful for making backups with limited space or for ref erencing status at a particular poi ...

  • Buffalo TeraStation 5200 NVR - page 93

    92 9 Select the backup target and click OK . Note: Backup targets may include "(LAN1)" or "(LAN2)" , indicating which LAN port will be used for the backup job. 10 Click OK . T asks added to "Backup List" are displayed . 11 Click Close . Replication Replication copies all data from a shar e to a share on a diff erent T ...

  • Buffalo TeraStation 5200 NVR - page 94

    93 2 Click to the right of "F older Setup" . 3 Choose the folder to set as a r eplication destination. 4 Click Edit . 5 Under "LAN Pr otocol Support" , check "Backup" and click OK . Note: Do not configure a backup passwor d for the shared f olders. F olders with a backup passwor d set cannot be selected as replication ...

  • Buffalo TeraStation 5200 NVR - page 95

    94 4 Click Add . 5 Click Browse under "Replication Source" . 6 Select the shared folder that will be the replication sour ce, then click OK . 7 Click Browse under "Replication T arget" . ...

  • Buffalo TeraStation 5200 NVR - page 96

    95 8 Select the shared folder that will be the replication tar get, then click OK . Note: Replication targets may include "(LAN1)" or "(LAN2)" , indicating which LAN port will be used for the replication task. 9 Click OK . 10 Click Ye s . Notes: • A maximum of 64 shared folders can be c onfigured for r eplication. • Re ...

  • Buffalo TeraStation 5200 NVR - page 97

    96 • If a network problem causes a replication error , unsynced data may be shown as "0" ev en though replication is incomplete. Click Resync t o recov er from the replication err or . All files from the source folder will be copied to the target f older . F ailov er With failov er , t wo T eraStations are connected to the network fo ...

  • Buffalo TeraStation 5200 NVR - page 98

    97 Connecting to the networ k at LAN por t 1 and setting failov er at LAN por t 1 With the first setup , if the main T eraStation fails, the backup T eraStation will replace it completely , using the same name and IP address. The backup T eraStation is updated o ver normal network traffic. Connecting to the networ k at LAN por t 1 and setting failo ...

  • Buffalo TeraStation 5200 NVR - page 99

    98 Usage Restrictions F unction Restric tions F ailov er is not available when any of the f ollowing functions are enabled: Replication, sleep mode, encrypted disk volume, MySQL server , media cartridge, L VM volume, iSCSI volume , por t trunking, cloud storage, surveillance server , hot spare, access restrictions by Active Dir ector y or NT domain ...

  • Buffalo TeraStation 5200 NVR - page 100

    99 4 Select a T eraStation to be the target backup device . Note: The target T eraStation's hostname, IP addr ess, and LAN port number will be shown. The LAN port selec ted here will be used to check the main T eraStation for continued operation. 5 Enter the administrator passw ord of the target backup device , then click Continue . 6 If the a ...

  • Buffalo TeraStation 5200 NVR - page 101

    100 Ser vice IP A ddress The "service IP address" will be the new address of the backup T eraStation when it takes over operation fr om the main T eraStation. If no ser vice IP address is set, or a fix ed IP address is set, an attempt is made to inherit the IP address from the main T eraStation. When the Main T eraSta tion F ails Backup T ...

  • Buffalo TeraStation 5200 NVR - page 102

    101 2 Move the AFP switch to the position to enable AFP . 3 Click to the right of "F older Setup" . 4 Choose a shared folder as y our backup destination for Time Machine. 5 Click Edit . 6 Under "LAN Pr otocol Support" , check " AFP (M ac)" and click OK . 7 Click OK . 8 Click Close . 9 Click Backup . 10 Click to the rig ...

  • Buffalo TeraStation 5200 NVR - page 103

    102 13 Selec t the shared f older that you set in the pr evious step, then click OK . 14 Click OK . 15 Click OK . 16 Move the Time Machine switch t o the position to enable Time Machine. 17 On the Mac, open System Pr eferences . ...

  • Buffalo TeraStation 5200 NVR - page 104

    103 18 Click Time Machine . ...

  • Buffalo TeraStation 5200 NVR - page 105

    104 19 Click Select Backup D isk . 20 Selec t the T eraStation, then click Use Disk . ...

  • Buffalo TeraStation 5200 NVR - page 106

    105 21 Enter a username and password with the rights to ac cess the shared f older of the T eraStation, then click Connect . Note: If access restrictions are not configur ed on the target share, log in with the administr ator account . The default username and password f or the administrator accoun t are "admin" and "passwor d" ...

  • Buffalo TeraStation 5200 NVR - page 107

    106 These devic es are supported: • USB mass storage devices • Card readers (ex cept for card r eaders that can recog nize two or more memory cards) • Digital cameras and other PTP devices • UPS devices that are specifically indicated as compatible • USB printers These devic es are not supported: • USB hubs • M ic ...

  • Buffalo TeraStation 5200 NVR - page 108

    107 Chapter 6 Remot e A c cess W ebA cc ess W ebAccess is a software pr ogram for ac cessing the files in the shared folder of y our T eraStation from your computer or mobile devices through the Internet. Be careful when configuring W ebAcc ess. C ertain settings c an make the files in the shared folder a vailable to an yone on the Internet , witho ...

  • Buffalo TeraStation 5200 NVR - page 109

    108 4 Configure the desir ed settings, then click OK . • Y ou may use the default BuffaloNAS.com registration, or disable to use a diff erent DNS server . • Choose a "BuffaloNAS.com Name" and "BuffaloNAS.com Key" f or your W ebAc cess account. Names and keys may use 3 to 20 alphanumeric characters, undersc ores (_), an ...

  • Buffalo TeraStation 5200 NVR - page 110

    109 Notes: • The follo wing levels of security are available: " Allow Anonymous" - An yone can access (view) shar ed folders. " Allow All Groups and Users" - All gr oups and users register ed on the LinkStation or T eraSta tion can use W ebAccess . "Use Inherited F older Permissions" - Users and g roups hav e the ...

  • Buffalo TeraStation 5200 NVR - page 111

    110 4 F rom T arget Folder , select the shared f older that will be connected. Note: The selected folder is used int ernally by "WebA ccess Remote" . Files ar e not added to this folder and the amount of used space does not increase . 5 Y ou may choose to ent er a BuffaloNAS.com name or an external DNS/IP address. If using a BuffaloNAS.co ...

  • Buffalo TeraStation 5200 NVR - page 112

    111 1 TB of files to the WebAc cess Remote target folder , it is recommended to keep at least 2 TB of free spac e available. FTP By default, the T eraStation's shares are only acc essible by users connected to the same network or router as the T eraStation. The optional FTP ser ver allows users outside the local network to ac cess the T eraSta ...

  • Buffalo TeraStation 5200 NVR - page 113

    112 Ac cessing the T eraStation with an Anon ymous User * • T o allow anonymous access to y our FTP share, disable acc ess restrictions. • T o access the T eraStation via anonymous FTP , configure your FTP client software with the following settings: Hostname: IP address of the T eraSta tion Username: anonymous P assword: an y character s ...

  • Buffalo TeraStation 5200 NVR - page 114

    113 3 Click Add . 4 Select the ser vice name from the drop-down menu. Enter the bucket name, ac cess key ID , and secret acc ess key; selec t the storage class and the connection protoc ol, then click OK . 5 Enter a shared f older name to use with the cloud storage service and click OK . ...

  • Buffalo TeraStation 5200 NVR - page 115

    114 6 Under "LAN Pr otocol Support" , check "Backup" and enter the desired shar ed folder settings. Click OK . 7 Click OK . 8 Click Close . Uploading F iles to Cloud St orage T o upload files to cloud storage , using backup job is recommended. 1 In Settings, click Backup . 2 Click to the right of "Backup" . ...

  • Buffalo TeraStation 5200 NVR - page 116

    115 3 Click Create New Job . ...

  • Buffalo TeraStation 5200 NVR - page 117

    116 4 Select backup settings such as date and time to run. 5 Click Add . 6 Click Browse under "Backup Source F older Name" . ...

  • Buffalo TeraStation 5200 NVR - page 118

    117 7 Select the shared folder that uploaded files will be sav ed to, then click OK . 8 Click Browse under "Backup T arget F older Name" . 9 Select the shared folder created fr om the "Configuring Cloud Stor age" section above, then click OK . 10 Click OK . T asks added to "Backup List" are displayed . 11 Click Close . ...

  • Buffalo TeraStation 5200 NVR - page 119

    118 • If using the cloud storage through a pro xy ser ver , click Proxy Settings . In the displayed page, enter the pr oxy server name, por t number , username, and password . Ask your network administrator f or detailed pro xy server settings. • T o use after the network was temporarily disconnected, click Reconnect . • If a file is ...

  • Buffalo TeraStation 5200 NVR - page 120

    119 Chapter 7 BitT orren t BitT orrent is a protoc ol for distributing large amounts of data efficien tly . The inf ormation in this chapter is for users who are familiar with BitT orrent. Note: Use compatibility mode to use the do wnload manager with Window s 8.1 and Window s 8. 1 In Settings, click Applications . 2 Click to the right of "Bit ...

  • Buffalo TeraStation 5200 NVR - page 121

    120 5 Select the shared folder where the downloaded file will be sa ved, then click OK . 6 Click OK . 7 Move the BitT orrent switch to the position to enable BitT orrent. 8 Click to the right of "BitT or rent" . ...

  • Buffalo TeraStation 5200 NVR - page 122

    121 9 Click Open Download Manager . The default username is "admin" and the default passwor d is blank (no password). 10 The download manager will open. ...

  • Buffalo TeraStation 5200 NVR - page 123

    122 Chapter 8 Multimedia DLNA DLNA is a set of guidelines for sharing digital media. The T eraStation includes a DLNA server compliant with the DLNA guidelines. The movies, photos, and music sa ved on this product can be played back on DLNA-compliant T Vs, stereo equipment, game c onsoles, and other devices within the network. 1 In Settings, click ...

  • Buffalo TeraStation 5200 NVR - page 124

    123 8 Click to the right of "DLNA Ser ver" . 9 Click Edit . 10 Selec t an interval for DLNA server database updates and click OK . 11 Click OK . Playing F iles T o play back conten t from a DLNA-compatible device: 1 Connect the DLNA-compatible device to the same network as the T eraStation and turn it on. 2 Select the T eraStation in the ...

  • Buffalo TeraStation 5200 NVR - page 125

    124 1 In Settings, click Ser vices . 2 Click to the right of "DLNA Ser ver" . 3 Click DLNA Client Acc ess Permissions . 4 A list of the MAC addr esses, IP addresses , and device names of the DLNA-compatible devices connected to the same network as the T eraStation is displayed. If your device is not list ed, click Refresh Database . Strea ...

  • Buffalo TeraStation 5200 NVR - page 126

    125 1 In Settings, click Ser vices . 2 Click to the right of "DLNA Ser ver" , then click Edit . 3 Y ou may change the update int er val, or select Refresh Database to update the da tabase immediately . Disabling Playback fr om Specific Devices Y ou may block specific DLNA devices fr om playing back media content. 1 In Settings, click Ser ...

  • Buffalo TeraStation 5200 NVR - page 127

    126 4 Uncheck the devices you do not want t o allow to play media and click OK . Suppor ted F ile T ypes The T eraStation suppor ts DLNA streaming of files with the extensions below . T ypes F ile Extensions Video files .avi, .divx, .asf , .mpg, .mpe , .m1v , .vob , .mts , .m2ts, .m2t, .mpeg, .mpeg2, .v dr , .spts, .tp, .ts , .3gp, .mov , .m4v , .w ...

  • Buffalo TeraStation 5200 NVR - page 128

    127 3 Click Edit . 4 Click Browse . 5 Select the shared folder that you wan t to make available to iT unes, then click OK . ...

  • Buffalo TeraStation 5200 NVR - page 129

    128 6 Click OK , then OK again. 7 Move the iT unes ser ver switch to the position. Squeezebo x Ser v er Squeezebox is a network music play er by Logit ech that can play back music stor ed on your network using your wired or wireless LAN without a c omputer . S queezebo x supports mp3, flac, ogg, he -aac v2 and wma. Configur ation 1 In Settings, cli ...

  • Buffalo TeraStation 5200 NVR - page 130

    129 5 Click Browse . 6 Select the shared folder that you wan t to make available to Squeezebo x, then click OK . 7 Enter port number (9001 is recommended), then click OK . 8 Click OK . ...

  • Buffalo TeraStation 5200 NVR - page 131

    130 9 Click Open Squeezebox . The Squeezebox's settings will open. ...

  • Buffalo TeraStation 5200 NVR - page 132

    131 Chapter 9 Surveillanc e Ser ver The T eraStation suppor ts streaming video fr om RTSP (Real Time Str eaming Prot ocol) network cameras. Getting Star ted The follo wing items are requir ed: • T eraStation with sur veillance camera support • Suppor ted network camera • Ethernet cable • Ethernet hub • Computer Supported op ...

  • Buffalo TeraStation 5200 NVR - page 133

    132 Installing Client T ools Download "Buffalo Surveillance Camera Client T ools Setup" fr om the Buffalo website and install the f ollowing client tools using the install wizard on y our computer . Camera P olicies - Registers that a netw ork camera is connected and ready to rec ord. Live V iew er - Lets you view video as it is being r e ...

  • Buffalo TeraStation 5200 NVR - page 134

    133 2 Click to the right of "Surveillance Cameras" . 3 Click Edit . 4 F rom "LAN P or t" , select the LAN por t connected to the same network as the network camera and computer where the client tools ar e installed. 5 Click Browse . 6 Choose a folder f or recorded video , then click OK . Note: Use a f older with at least 100 GB ...

  • Buffalo TeraStation 5200 NVR - page 135

    134 9 Move the surveillance camera switch to the position. Notes: • If the target shared folder specified as the st orage location for r ecorded video is deleted , the sur veillance camera is automatically disabled. • Do not directly edit recorded video data in the shar ed storage folder . I f a file is directly edited, the surveillance c ...

  • Buffalo TeraStation 5200 NVR - page 136

    135 4 Open the License tab , then click Activat e Free Lic ense . T o deactivate the license, click . ...

  • Buffalo TeraStation 5200 NVR - page 137

    136 5 Make sure that "SurveillanceCamera" and "Har dDisk" were added t o "Installed Licenses" . The free license is no w enabled. Registering Rec ording P olicies Register the network camera that is used. 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Camer a Policies . F or Windo ws 8.1 and Windo ws 8, ...

  • Buffalo TeraStation 5200 NVR - page 138

    137 3 Click Next . 4 Click Find C ameras . ...

  • Buffalo TeraStation 5200 NVR - page 139

    138 5 Select the detec ted network camera, then click OK . Note: Network cameras that are alr eady in use are indicated b y an asterisk (*) and are gra yed out. 6 Enter the username and passwor d if they are configured , then click Next . Note: Clicking T est Camer a runs an operational check on the network camera. 7 Enter the description, then cli ...

  • Buffalo TeraStation 5200 NVR - page 140

    139 8 Select the recording schedule, then click Next . 9 Select the T eraStation where the video will be rec orded, then click Next . ...

  • Buffalo TeraStation 5200 NVR - page 141

    140 10 Check the registration inf ormation; if it is correct, click Next . 11 Click Next . An additional network camera can be regist ered by selecting "Y es" when asked "Do you want to add an additional camera?" ...

  • Buffalo TeraStation 5200 NVR - page 142

    141 12 Click Finish . 13 Click Sa ve . Recording will begin. Y ou' ve no w register ed the recording policy of the network camera. Checking Recording T o check that recor ding is working correctly, f ollow the proc edure below . W ait at least 15 minutes after r egistering the recor ding policy before checking the recording. 1 Click Star t - B ...

  • Buffalo TeraStation 5200 NVR - page 143

    142 V iewing Sav ed V ideo F ollow the procedur e below to view rec orded data sav ed in the T eraStation. 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Surveillance Video Manager . F or Windo ws 8.1 and Windo ws 8, click Surveillance Video Manager in the Start menu. 2 Click Search . 3 Video clips ar e shown in the search results at ...

  • Buffalo TeraStation 5200 NVR - page 144

    143 2 Select the search criteria on the left side of the search screen, then click Search . ...

  • Buffalo TeraStation 5200 NVR - page 145

    144 3 The search r esults are displayed . Click a thumbnail to start the media viewer . ...

  • Buffalo TeraStation 5200 NVR - page 146

    145 4 Select the sec tion to export and click Expor t . This will r egister the video to the export queue. 5 Open the Export screen, register the export information from "Export Job Configuration" , and click "Star t Export" . The video is exported in MOV format. This completes exporting video in the MOV format. V iewing V ideo ...

  • Buffalo TeraStation 5200 NVR - page 147

    146 2 Registered network cameras ar e listed in the "Cameras" f older on the right side of the screen. T o view a video that is currently being rec orded, double- click the camera whose video you w ant to view or drag to a frame of the camera viewer on the left side of the screen. This completes viewing curren t video. Moving Rec orded V ...

  • Buffalo TeraStation 5200 NVR - page 148

    147 3 Click the Source tab . Under "Vault" , select the T eraStation where the rec orded video data is sav ed. Select " Any" to migrat e recorded data on all netw ork-connec ted T eraStations. 4 Click the Destination tab to select which T eraStation you want t o move the data fr om "Vault" off of . 5 Set the migration ...

  • Buffalo TeraStation 5200 NVR - page 149

    148 3 Click the Source tab and select the T eraStation where the r ecorded video data is sa ved under "Vault" . Note: If "any" is selected, rec orded data for all T eraStations connected to the network will be backed up. Click the Destination tab, then select the T eraStation where you want to mo ve the data from "V ault&qu ...

  • Buffalo TeraStation 5200 NVR - page 150

    149 3 Click the Source tab and select the T eraStation on which rec orded video is saved under "V ault" . 4 Open the Criteria tab; under "Miscellaneous Options" , set " W atermark: High" and "Watermark: Low" options . This determines the used space thr eshold. F or example, if you set Wat ermark: H igh to &qu ...

  • Buffalo TeraStation 5200 NVR - page 151

    150 Changing Where Rec orded V ideo Is Sav ed F ollow this procedur e to change the T eraStation to which video is saved . 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Camer a Policies . F or Windo ws 8.1 and Windo ws 8, click Camera P olicies in the Start menu. 2 Click the icon on the tool bar and open the "Camer a Configurat ...

  • Buffalo TeraStation 5200 NVR - page 152

    151 Client T o ols Camer a P olicies Camera P olicies is utility software that registers the network cameras and starts video recording . Click to start a wizard to register network cameras and schedule r ecording . Click to open the camera configura tion screen where network cameras ar e register ed. Click to start a new registration scr een for a ...

  • Buffalo TeraStation 5200 NVR - page 153

    152 Note: T o view the cur rent video , the network camera must be r egistered in Camer a Policies . • The layout of the camer a view (numbers of rows and c olumns) and register ed network cameras are displayed in the panel on the right side of the screen. • The camera view (live video) is displa yed on the left side panel. In the default ...

  • Buffalo TeraStation 5200 NVR - page 154

    153 Policy T ype Action Purge Deletes the recor ded video data. The right side of the screen includes tools f or creating and updating da ta ser vice policies. The left side of the screen shows an ov er view of all data service policies. Notes: • If is displayed f or a policy in the lef t-side frame , the policy is disabled. • Surveillanc ...

  • Buffalo TeraStation 5200 NVR - page 155

    154 Icon Description Loads a media device . Pr epares a media device. Unloads a media device. Erases a media device. Refreshes the current scr een. Sur v eillance V ideo Manager Surveillance Video Manager is utility software for per forming sear ches and exporting recorded video data. Search W indow ...

  • Buffalo TeraStation 5200 NVR - page 156

    155 Export Window Networ k Activity Network Activity is utility sof tware that display s the T eraStations on which surveillance cameras are opera ting on the network in real time and in graphical f orm. All clients and T eraStations located on the network are indicated b y and labels. These can be moved by dragging and dropping them. Clients ar e ...

  • Buffalo TeraStation 5200 NVR - page 157

    156 Mini V ault Stats Double -click ing the icon f or a T eraStation on "Network Activity" starts "M ini V ault Stats" . "Mini V ault Stats" shows the network traffic in graphical f orm. A c tiva ting Additional Lic enses Pur chasing an additional license (sold separately) enables you t o connect and use two or more ca ...

  • Buffalo TeraStation 5200 NVR - page 158

    157 3 Open the License tab , then click + . If your default free license activation is not installed, see the "Enabling the F ree Lic ense" section to install it. 4 Enter the product key for the lic ense pack (sold separately), then click OK . ...

  • Buffalo TeraStation 5200 NVR - page 159

    158 5 Confirm that the new license was added t o "Installed License" . Y ou have no w activated the additional license. T eraSta tion Not C onnected to the Internet 1 If the T eraStation is being used in an envir onment where Internet access is not a vailable, a separat e computer with access to the Internet is requir ed to activate the a ...

  • Buffalo TeraStation 5200 NVR - page 160

    159 3 Select the T eraStation where you w ant to add the license, right -click it, and click Proper ties . 4 Open the License tab , then make a note of the "Host Id" . 5 Open the website in w eb browser: http://buffalo .jp/support_s/camera_licence/. ...

  • Buffalo TeraStation 5200 NVR - page 161

    160 6 F rom the license pack (sold separately), en ter the product key and host ID code and click " Activate Software License" . 7 Downloading of the license file (*.lic) begins . Save the license file to a USB memory drive or other storage device. 8 Copy the license file t o a computer connected to the same network as the T eraStation. 9 ...

  • Buffalo TeraStation 5200 NVR - page 162

    161 11 Open the License tab , then click + . 12 Selec t "Import license file" , then click Browse . 13 Selec t the license file that w as saved befor e, then click OK . ...

  • Buffalo TeraStation 5200 NVR - page 163

    162 14 Check that the license pack was added to "Installed Licenses" . This completes authentica tion of an additional license. T roubleshooting Issue Possible C ause P ossible Solution Video r ecording does not start. Surveillance Camera setting not enabled. Enable surveillance camera in Settings. A LAN cable between the T eraStation and ...

  • Buffalo TeraStation 5200 NVR - page 164

    163 Issue Possible C ause P ossible Solution I cannot enable the surveillance camera. F ailov er is running. Disable failover . Surveillance cameras no longer recor d video. The target shared f older for the recor ded video was deleted. Enable surveillance camera functionality in S ettings. I cannot view the network camera using Live V iewer . The ...

  • Buffalo TeraStation 5200 NVR - page 165

    164 Chapter 10 A dvanced F eatures Antivir us Sof tware T rend Micro NAS Security™ can protect your network and data fr om soft war e viruses, malware , and spyware. T o use T rend Micro NAS software , purchase an OP- TSVC license pack (sold separately). If your T eraStation includes activated antivirus software, no license r egistration is neces ...

  • Buffalo TeraStation 5200 NVR - page 166

    165 2 Enter the serial number from the "T rend Micro NAS Security TM License P ack Guide" , included in your pack age. Click Activat e . The new license is now r egistered . T o check the status of the current license , open the T rend M icro NAS Security settings page and navigate t o Administr ation - Product License on the left-side me ...

  • Buffalo TeraStation 5200 NVR - page 167

    166 3 Click Options . 4 Enter your username and passw ord, then click Log O n . Y ou can log on with the T eraStation's admin account. The default username and password are "admin " and "password" . 5 T rend Micro NAS Security settings will open. Note: The T rend Micro NAS Security settings page is compatible with IE 6.0 SP ...

  • Buffalo TeraStation 5200 NVR - page 168

    167 1 F rom the left-side menu, click Administr ation - Pro xy S ettings . 2 Check "Use a pro xy ser ver to access the Internet (Lic ense update)" . Enter the IP address and port of the proxy server , then click Save . The antivirus software is now configur ed to use a pro xy ser ver . Updating F or best results, c onfigure your antivirus ...

  • Buffalo TeraStation 5200 NVR - page 169

    168 2 Check "Enable Scheduled Update" . 3 Select a time for updates to begin, an int er val for upda tes, and an amount of time f or updates to continue . Select the components to update. Click Save . The antivirus software is now configur ed to update automatically a t the scheduled time. Updates will not be downloaded if the T eraStatio ...

  • Buffalo TeraStation 5200 NVR - page 170

    169 Real-time Scan The virus scan runs in the background , scanning every file that you read or write. This is the default type of scanning. Y our T eraStation may run slower if r eal-time scanning is enabled. Scheduled Scan A scheduled scan is executed a t specific regular intervals, such as every T uesday at 3 am. Manual Scan A manual scan runs o ...

  • Buffalo TeraStation 5200 NVR - page 171

    170 1 F rom the left-side menu, choose "Logs" . 2 Click the log item that you wan t to check. 3 Click Display Log . This completes the pr ocedure f or checking the log. Online Help F or more information on the an tivirus soft war e, ref er to the online help . Follo w the procedur e below to access the online help. ...

  • Buffalo TeraStation 5200 NVR - page 172

    171 1 F rom the right-top menu, choose Help - C ontents and Index . 2 Online help will open. Online help is now ready to use . Email Notification Y our T eraStation can send you email reports daily , or when settings are changed or an error occurs . Notification emails may be triggered by an y of the following ev ents: • Scheduled hard drive s ...

  • Buffalo TeraStation 5200 NVR - page 173

    172 5 Enter your mail server settings and choose which events will trigger notifications . Click OK to send a test email. Sleep Mode T o save energy , you can specify times to put the T eraStation into sleep (standby) mode, during which the har d drive and LEDs are turned off . 1 In Settings, click Management . 2 Click to the right of "Sleep T ...

  • Buffalo TeraStation 5200 NVR - page 174

    173 4 Specify the timer interval, wake-up time, and time to go into sleep mode, then click OK . Notes: • Up to three timers can be set. • The time to enter sleep mode can be set fr om 0:00 am to 3:45 of the next day . The time to wake fr om sleep mode can be set from 0:00 to 23:45. If the time to enter sleep mode is after 24:00, the wake- ...

  • Buffalo TeraStation 5200 NVR - page 175

    174 On days other than Wednesday , normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On W ednesday , nor mal operation beg ins at 10:00 and the unit goes into sleep mode at 1:00 am of the next d a y. Example 4: When running at a current time of 10:00 Wednesday Timer 1: Daily 9:00–18:00 Timer 2: W ednesday 7:30–22:00 Ti ...

  • Buffalo TeraStation 5200 NVR - page 176

    175 • On the local network, W ake - on-LAN packets may be sent t o por t 2304 on either of the T eraStation's LAN ports. If the T eraStation is connected to a Buffalo wireless r outer configured f or remote access , then it may be turned on from outside the local network (from the W AN side). T o use this feature, connect the rout er to o ...

  • Buffalo TeraStation 5200 NVR - page 177

    176 8 Configure the desir ed settings, then OK . Notes: • If the T eraStation is connected directly to a UPS, select "Sync with UPS connected to this T eraSta tion" . I f a differen t T eraStation is connected to the UPS, select "Sync with UPS connected to another LinkStation or T eraStation on the same network" . After mak ...

  • Buffalo TeraStation 5200 NVR - page 178

    177 T runking Mode Characteristics TLB The outgoing network packet traffic is distributed acc ording to the current load (relativ e to the speed) on each network interface slave . *A separate intelligen t switch that supports EtherChannel or other por t trunking is required. Configur e two LAN ports on the switch for por t trunking first. **A separ ...

  • Buffalo TeraStation 5200 NVR - page 179

    178 7 Reboot the T eraStation bef ore use. C onnec ting a P rinter Y ou can connect a printer to the USB port on the T eraStation. Notes: • Only one USB printer can be connected to the T eraSta tion. • Bidirectional communication is not supported i.e., remaining ink quantities and other printer sta tus information is not display ed. •? ...

  • Buffalo TeraStation 5200 NVR - page 180

    179 7 Select your printer , then click OK . 8 Register the printer . Setting Up a Printer with Windo w s XP 1 In Settings, click Ser vices . 2 Move the print server switch to the position to enable the print ser ver . 3 Refer to the manual supplied with the printer . 4 Click Star t - Control P anel . 5 Click Network and Internet Connections . 6 Cli ...

  • Buffalo TeraStation 5200 NVR - page 181

    180 9 Register the printer . T er aSearch T eraSearch lets you sear ch for character strings contained in files (text files, Word files , etc.) stor ed on the T eraStation. F ollow the steps below to enable it . 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder t o be indexed. 4 Click ...

  • Buffalo TeraStation 5200 NVR - page 182

    181 11 Click Refresh Index 12 Click Edit . 13 Enter the port number that you want to use and the time that the index will be updated , then click OK . 14 Open the following URL in your br owser . http://(IP address of your T eraStation):3000/ Note: Y ou can identify your IP address from NAS Naviga tor2. 15 Enter your T eraStation's username an ...

  • Buffalo TeraStation 5200 NVR - page 183

    182 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder f or offline files. 4 Click Edit . 5 Choose "Manual File C aching" , " Aut omatic F ile Caching" , or " Aut omatic Pr ogram and F ile Caching" , then click OK . Note: • "Manual F ile Caching&q ...

  • Buffalo TeraStation 5200 NVR - page 184

    183 9 Check "Enable Offline Files" , then click OK . Note: Offline files cannot be enabled if "Use F ast User Swit ching" is enabled. T o change the setting, open "User Accoun ts" in Control P anel and select "Change the way users log on or off " . 10 Right- click the icon of the shar ed folder on the T eraSt ...

  • Buffalo TeraStation 5200 NVR - page 185

    184 (2) Navigate to Start - All Progr ams - Accessories - S ync Center and click Sync All t o synchronize all offline files. (3) Disconnect the computer from the network and verify that y ou can access offline files. DFS DFS (Distributed F ile System) is a set of client and server services that allows Windo ws users to organize man y distributed SM ...

  • Buffalo TeraStation 5200 NVR - page 186

    185 If enabled, a DFS link target shared f older is created under the DFS r oot. If disabled, up to 8 DFS link target shared folders can be cr eated under the DFS root. 5 Enter DFS Root F older Name . 6 Click Add Link . 7 Enter the link name, hostname , and shared folder name , then click OK . 8 Click OK . 9 Move the DFS switch to the position to e ...

  • Buffalo TeraStation 5200 NVR - page 187

    186 A cc essing from an NFS Clien t Note: (US purchasers only) Buffalo 's customer support will help configure the NFS settings on your T eraStation, and will support VMware and Windows clients but will not pro vide suppor t f or configuring your Linux or other UNIX clients. There are many types of UNIX and the proc edures for c onfiguring NFS ...

  • Buffalo TeraStation 5200 NVR - page 188

    187 10 Click Add Client . 11 Enter the IP address and hostname of the NFS client, then click OK . Note: T o delete a client, check the hostname and click Delete Client . 12 Click Close . 13 Enter the mount command to acc ess the shared folder fr om the NFS client. The mount command depends on y our operating system. The examples below assume that I ...

  • Buffalo TeraStation 5200 NVR - page 189

    188 mount -t nfs 192.168.11.10:/mnt/arra y1/share /mnt/nas F or Windo ws Service for Unix 3.5: mount 192.168.11.10:/mnt/array1/shar e z: F or Solaris 10: mount -F nfs 192.168.11.10:/mnt/arra y1/share /mnt/nas Notes: • T o configure access r estrictions by IP address, click Services - Edit , then enter the desired settings . • T o use shar ...

  • Buffalo TeraStation 5200 NVR - page 190

    189 SSL K ey s SSL keys are used during setup screen oper ations and FTP communication. SSL (Secure Socket Layer) is a type of encryption system called public key encr yption. Generally , SSL is managed by the two files below . server .cr t (SSL Certificates) The T eraStation sends the file to a computer , and the computer uses it to perform encr y ...

  • Buffalo TeraStation 5200 NVR - page 191

    190 4 Click Edit . Note: The settings of the PHP language interpr eter can be changed from "Edit php .ini" . 5 Click Browse . ...

  • Buffalo TeraStation 5200 NVR - page 192

    191 6 Choose a shared folder f or the web server , then click OK . 7 Choose an external por t, then click OK . MySQL Ser ver The T eraStation can be used as a MySQL ser ver . A MySQL database may be installed and linked with the web server . 1 In Settings, click Ser vices 2 Move the MySQL server switch to the position to enable the MySQL ser ver . ...

  • Buffalo TeraStation 5200 NVR - page 193

    192 5 Click Browse . 6 Choose a shared folder f or the MySQL ser ver , then click OK . 7 Choose an external por t, then click OK . SNMP If SNMP is enabled, you can bro wse your T eraSta tion from SNMP-compatible network management software. The specific MIB (management information base) file f or Buffalo is available from the Buffalo w ebsite. 1 In ...

  • Buffalo TeraStation 5200 NVR - page 194

    193 2 Move the SNMP switch to the position to enable SNMP . 3 Click to the right of "SNMP" . 4 Click Edit . 5 Configure the desir ed settings, then click OK . Saving and Applying Settings The T eraStation's settings can be saved t o a USB memor y device and r estored to another T eraStation of the same series. Use this function to ba ...

  • Buffalo TeraStation 5200 NVR - page 195

    194 • The USB memory device should have a capacity of at least 1 GB. • Any data st ored on the USB memory device will be deleted. 2 In Settings, click Management . 3 Click to the right of "Restore/Erase" . 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStat ...

  • Buffalo TeraStation 5200 NVR - page 196

    195 3 Click to the right of "Restore/Erase" . 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStation. 5 Select " T ransf er settings from a USB drive" , then click Execute . Restoring F ac tor y Defaults Initializing from Settings T o initialize the T eraSt ...

  • Buffalo TeraStation 5200 NVR - page 197

    196 Crea ting an Initialization Driv e A system initialization drive will r estore the settings on y our T eraStation to their factory defaults. Y ou can initialize them without logging in to Settings. F ollow the st eps below to creat e a system initialization drive . Notes: • Normally , making and using the system initialization drive will n ...

  • Buffalo TeraStation 5200 NVR - page 198

    197 Resetting the A dministra tor P assw ord Crea ting a P asswor d Reset Drive A password initialization driv e can reset the administrator passw ord to its default value ("passw ord"). This could be very useful if you forget y our admin password. 1 Connect a 1 GB or larger USB memory device (not included) to a USB 2.0 por t on the T era ...

  • Buffalo TeraStation 5200 NVR - page 199

    198 2 Click to the right of "Logs" . 3 Click Edit . 4 Select a log to view . The file operation log stor es file operations performed on the internal hard drives. F ile operations on USB drives are not logged . Note: All logs are enc oded in UTF-8 format. T o show them c orrectly , change the soft war e encoding to "UTF-8" . T o ...

  • Buffalo TeraStation 5200 NVR - page 200

    199 Under the selected shared folder , a folder named "system_log" will no w contain the logs. Updating the F irm w are If a new firmware is av ailable, a message is displayed when the T eraStation boots. Y ou can update the firmware by following wa ys: Notes: • Updating version 2.40 or earlier firmwar e to 2.60 will overwrite your c ...

  • Buffalo TeraStation 5200 NVR - page 201

    200 3 Click Update Settings . 4 Select "Update the firmware automatically" and click OK . Alternately , you may choose to schedule updates f or a specific time of day . Name , Date , T ime, and Language Configure the T eraStation's hostname, dat e, time, and language as shown belo w . Note: If the T eraStation is being used as an iSC ...

  • Buffalo TeraStation 5200 NVR - page 202

    201 3 Click Edit . 4 Click the Name tab, then c onfigure the T eraStation's name and description. 5 Click the Time tab . Click Use L ocal Date/Time to use your c omputer's time settings for the T eraStation. By default, the T eraStation adjusts its clock automatically by using a default NTP server . This NTP server belongs to Internet Mul ...

  • Buffalo TeraStation 5200 NVR - page 203

    202 If an NTP ser ver is specified by name inst ead of IP address, make sure tha t a DNS ser ver is c onfigured for the T eraStation. Note: The internal clocks of the T eraStation and other devices on your network may run at slightly diff erent speeds. Over a long period of time your network devices may sho w somewhat differ ent times, which can ca ...

  • Buffalo TeraStation 5200 NVR - page 204

    203 Note: This tab changes the language used by the T eraStation for email notifications, DLNA, and other functions. T o change the language displayed in Settings, go t o Advanced Settings or Easy Admin and click L anguage in the menu bar . Choose your desired language from the drop-down menu. Beep Aler ts Y ou can set the T eraStation to beep when ...

  • Buffalo TeraStation 5200 NVR - page 205

    204 1 In Settings, click Management . 2 Click to the right of "Notifications" . 3 Click Edit . 4 Click Fr ont Panel Display Settings . 5 Configure y our settings, then click OK . Jumbo F rames If your other network devices support it, you may be able to increase network performance with jumbo frames. 1 In Settings, click Network . ...

  • Buffalo TeraStation 5200 NVR - page 206

    205 2 Click to the right of "IP Addr ess" . 3 Click the LAN port where the jumbo frames will be used. 4 Select the desired Ethernet frame size and click OK . ...

  • Buffalo TeraStation 5200 NVR - page 207

    206 Note: Make sure the T eraSta tion's Ethernet frame size is smaller than the hub or rout er's. Larger frame siz es may not transfer the data t o the T eraStation corr ectly. Changing the IP A ddress Normally , the T eraStation's IP address is set automatically fr om a DHCP ser ver on y our network. I f you pr efer , you can set it ...

  • Buffalo TeraStation 5200 NVR - page 208

    207 4 Disable "DHCP" and enter the desired network addr ess settings, then click OK . Notes: • Do not set the same address for LAN port 1 and LAN por t 2. This may cause unstable network communication. • Use LAN port 1 to access differen t network subnets from the T eraStation. Access to a diff erent network subnet is not possib ...

  • Buffalo TeraStation 5200 NVR - page 209

    208 Chapter 11 Utilities NAS Naviga tor2 f or W indow s NAS Navigator2 is a utility prog ram that makes it easy to display Settings, change the T eraStation's IP address, or check its hard drive . If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically . Double -click the icon to start NAS Navi ...

  • Buffalo TeraStation 5200 NVR - page 210

    209 Name Description Menu Map Share * Assigns the T eraStation's shared folder as a network drive . Disconnect Share * Unmaps the network drive. Map All Remote Shares to Drive Lett ers Assigns all the T eraStation's shared folders as network drives. Create Desktop Shortcut * Creates a shortcut to the T eraStation's shared folder (sha ...

  • Buffalo TeraStation 5200 NVR - page 211

    210 Name Description Refresh Refreshes list of NAS devices. Browse Shar es Displays NAS Naviga tor2 window . Exit Exits NAS Navigator2. The follo wing tasks may be per formed fr om the T eraStation's properties page. Name Description Configuration Click Settings to open the configuration interface. IP Address Check Use DHCP to assign an IP add ...

  • Buffalo TeraStation 5200 NVR - page 212

    211 2 Right-click on the T eraStation's icon, then click Map Share . 3 An icon for the mapped shar e will appear in Computer or My Comput er . Y ou can use this network drive just like any other hard driv e. Changing the IP A ddress 1 Double -click the icon to start NAS Navigator2. 2 Right-click on your T eraStation's icon and choose P ro ...

  • Buffalo TeraStation 5200 NVR - page 213

    212 3 Uncheck "Use DHCP" and enter the desir ed settings, then click OK . If the username and password prompt appears, enter the admin username and passw ord. Note: The f ollowing IP addresses are r eser ved and should not be used . If you configure one of them by ac cident, initialize all settings by ref erring to the "Restoring F a ...

  • Buffalo TeraStation 5200 NVR - page 214

    213 If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically . T o launch it, click the icon in the Dock. Click on a T eraStation's icon to display: • T otal capacit y • Used capacity • Workgr oup • IP address • Subnet mask • Default gateway • MAC address •? ...

  • Buffalo TeraStation 5200 NVR - page 215

    214 Mount as Netw ork Drive Y ou can map a shared f older as a network drive using NAS Navigator2 on Mac OS. 1 Click the icon in the Dock to start NAS Navigator2. 2 Double -click the T eraStation icon or click the T eraStation icon while holding down the control key , then selec t Open Folder . Ent er a username and password with the rights to ac c ...

  • Buffalo TeraStation 5200 NVR - page 216

    215 3 Uncheck "Use DHCP"; enter the desir ed settings and the administrator passwor d, then click Apply . Note: The f ollowing IP addresses are r eser ved and should not be used . If you configure one of them by ac cident, initialize all settings by ref erring to the "Restoring F actory Defaults" sec tion in chapter 10. Local lo ...

  • Buffalo TeraStation 5200 NVR - page 217

    216 F or Windo ws 8.1 and Windo ws 8, click iSCSI Connection T ool . Home Screen Name Description T arget If a T eraStation is selected, clicking Register iSCSI Device will register all the volumes in the T eraSta tion to the computer f or enabling connection to individual volumes. If a volume is already reg istered, click Unr egister iSCSI Device ...

  • Buffalo TeraStation 5200 NVR - page 218

    217 Name Description User authorization - Disabled:No authentication. - Enabled:User authentication is needed to c onnect to a volume. Connect on Start Up If selected, the computer will connect to the volume automatically a t boot. Refresh Search for network devices on the LAN. Exit Exit iSCSI Connection T ool. Menu Name Description F ile Refresh S ...

  • Buffalo TeraStation 5200 NVR - page 219

    218 10 Click Finish . NovaBA CKUP is now installed. T o launch Nov aBACKUP , click the ic on on your computer's desktop . F or more detailed information, click View Help in the No vaBACKUP Express Wizard or click Help T opics at the upper right of the NovaBA CKUP home screen. ...

  • Buffalo TeraStation 5200 NVR - page 220

    219 Chapter 12 A ppendix L CD Display The L CD display can be cycled through diff erent modes b y pressing the display button on the fr ont of the T eraStation. Also , the items display ed can be configured at Management - Notific ations - Fr ont Panel Display Settings in Settings. Modes L CD Message Description Corrective A ction LINK SPEED Note: ...

  • Buffalo TeraStation 5200 NVR - page 221

    220 L CD Message Description Corrective A ction UPS E10 Dependent Mode The T eraStation is running on the UPS battery due to a power outage. The system will now be shut do wn safely . Check that power is being supplied t o the UPS, and if there are no pr oblems, turn on the T eraStation. SYSTEM Error E11 F an F ailure An error occurred in the fan s ...

  • Buffalo TeraStation 5200 NVR - page 222

    221 L CD Message Description Corrective A ction RAID I18 ARRA Y x Rebuilding Rebuilding RAID array x. Note: T ransfer speeds are slower during the rebuilding proc ess. - RAID I19 ARRA Y x 0 Filling Writing 0s to RAID array x, er asing all data. - RAID I20 DISKx F ormatting F ormatting hard drive x. - RAID I21 DISKx Checking Checking hard drive x. - ...

  • Buffalo TeraStation 5200 NVR - page 223

    222 L CD Message Description Corrective A ction Recovery I42 Pr eparing Pr eparing to star t the rec overy process. - Recovery I43 Unsupported HW The T eraStation was started from the USB recov ery device, but the system cannot be recov ered from this USB r ecovery device. - Recovery I44 Disk1 not found Recovery from the USB reco very device was in ...

  • Buffalo TeraStation 5200 NVR - page 224

    223 Shared F olders "share" (for both Windows and Mac computers). The recycle bin is enabled on "share" by default. DHCP Client Normally , the T eraStation will get its IP address automatically from a DHCP server on the network . If no DHCP ser ver is available , then an IP address will be assigned as f ollows: IP Address: 169.2 ...

  • Buffalo TeraStation 5200 NVR - page 225

    224 Internal Hard Drive If a hard drive in the T eraStation malfunctions, replace it with a Buffalo drive of the same capacity . Use a Buffalo OP-HDWR series drive f or the TS5200DS, TS5000WR, and TS5000N series, a OP -HDH series drive for the TS5400RH, and a OP-HDS series drive for other TS5000 series T eraSta tions. The driv es listed above ar e ...

  • Buffalo TeraStation 5200 NVR - page 226

    225 Chapter 13 Regula tor y C ompliance Informa tion F or C ustomers in the United Stat es FC C Stat ement This equipment has been tested and f ound to comply with the limits f or a Class A digital device, pursuant t o par t 15 of the FCC Rules . These limits ar e designed to provide r easonable protection against harmful interference when the equi ...

  • Buffalo TeraStation 5200 NVR - page 227

    226 Dies ist ein Pr odukt der Klasse A. I n einer häuslichen Umgebung kann dieses Produkt F unkstörungen verursachen. Um diese zu beheben, müssen ggf . entsprechende Maßnahmen ergriff en werden. V erwenden Sie ausschließlich die K abel und Zubehörteile, die im Lieferumfang en thalten sind. Andere Z ubehör teile oder Kabel dür fen nur dann v ...

  • Buffalo TeraStation 5200 NVR - page 228

    227 Português Este é um produto de Classe A. Num ambien te doméstico , este produto pode pr ovocar interferências de rádio , pelo que o utilizador poderá ter de tomar medidas adequadas . Utilizar apenas cabos e acessórios incluídos na embalagem. Não utilizar outros acessórios ou cabos, salv o se especificamente indicado na documentação ...

Manufacturer Buffalo Category Server

Documents that we receive from a manufacturer of a Buffalo TeraStation 5200 NVR can be divided into several groups. They are, among others:
- Buffalo technical drawings
- TeraStation 5200 NVR manuals
- Buffalo product data sheets
- information booklets
- or energy labels Buffalo TeraStation 5200 NVR
All of them are important, but the most important information from the point of view of use of the device are in the user manual Buffalo TeraStation 5200 NVR.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Buffalo TeraStation 5200 NVR, service manual, brief instructions and user manuals Buffalo TeraStation 5200 NVR. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Buffalo TeraStation 5200 NVR.

Similar manuals

A complete manual for the device Buffalo TeraStation 5200 NVR, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Buffalo TeraStation 5200 NVR by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Buffalo TeraStation 5200 NVR.

A complete Buffalo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Buffalo TeraStation 5200 NVR - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Buffalo TeraStation 5200 NVR, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Buffalo TeraStation 5200 NVR, that we can find in the current document
3. Tips how to use the basic functions of the device Buffalo TeraStation 5200 NVR - which should help us in our first steps of using Buffalo TeraStation 5200 NVR
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Buffalo TeraStation 5200 NVR
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Buffalo TeraStation 5200 NVR in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Buffalo TeraStation 5200 NVR?

Use the form below

If you did not solve your problem by using a manual Buffalo TeraStation 5200 NVR, ask a question using the form below. If a user had a similar problem with Buffalo TeraStation 5200 NVR it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)