English dropdown-ico

Manual Hotpoint HS93I

9 pages 1.26 mb
Download

Go to site of 9

Summary
  • Hotpoint HS93I - page 1

    MorleyWay, Peterborough,PE2 9JB,England www.hotpoint.co.uk Hood Instructions HOTpoint Oven 14-04-2005 8:48 Pagina 1 ...

  • Hotpoint HS93I - page 2

    GB Contents Installation, 2-3 Assembly Technical information, 4 Electrical connection Power cable Technical data Description, 5 Filtering version Ducting version Operation, 6 Controls Maintenance,7 Cleaning the hood Cleaning the grease filters Replacing the charcoal filter Replacing the lamps Precautions and tips, 8 General safety Air vent Disposal ...

  • Hotpoint HS93I - page 3

    2 Installation 6) For the hoods in filtering version, fit the reducer (E). Securing the decorative flue 1) Assemble the support bracket of the decorative flue and adjust the width with the 2 screws (F). Then, using the screw anchors and the screws (G), secure it to the ceiling in such a way that it is in line with the hood. 2) For the filtering ver ...

  • Hotpoint HS93I - page 4

    3 d) Make the electrical connection of the hood by means of the power cable ( refer to the paragraph “Electrical connection” ). e) Lower the lower flue resting it on the hood. f) Check if the charcoal filter (P) has been installed. If not yet installed, proceed by sliding the 2 filter clips into their seats and turn the filter upwards. 3) Ducti ...

  • Hotpoint HS93I - page 5

    4 Electrical connection ! Arrange the electrical power supply within the decorative flue dimensions. ! When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. ! In case your appliance is not furnished with a non separating flexible cable and has no plug, or h ...

  • Hotpoint HS93I - page 6

    5 Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible). Filtering version The hood aspirates air from the kitchen impregnated with fumes and smells, purifies it through the grease filters and ...

  • Hotpoint HS93I - page 7

    6 GB Operation Controls Speed increase button Repeatedly pressing the button will increase the motor speed until reaching the maximum speed (12th speed). Boost speed button Activates the motor at boost speed (13th speed) for 10 minutes, after which the motor goes back to running at the speed set previously. Light button Turns the lights on/off. Mot ...

  • Hotpoint HS93I - page 8

    7 Maintenance Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat. Replace the charcoal filter with one of the same type by carrying out th ...

  • Hotpoint HS93I - page 9

    8 Disposal The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduc ...

Manufacturer Hotpoint Category Ventilation Hood

Documents that we receive from a manufacturer of a Hotpoint HS93I can be divided into several groups. They are, among others:
- Hotpoint technical drawings
- HS93I manuals
- Hotpoint product data sheets
- information booklets
- or energy labels Hotpoint HS93I
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hotpoint HS93I.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hotpoint HS93I, service manual, brief instructions and user manuals Hotpoint HS93I. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hotpoint HS93I.

Similar manuals

A complete manual for the device Hotpoint HS93I, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hotpoint HS93I by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hotpoint HS93I.

A complete Hotpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hotpoint HS93I - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hotpoint HS93I, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hotpoint HS93I, that we can find in the current document
3. Tips how to use the basic functions of the device Hotpoint HS93I - which should help us in our first steps of using Hotpoint HS93I
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hotpoint HS93I
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hotpoint HS93I in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hotpoint HS93I?

Use the form below

If you did not solve your problem by using a manual Hotpoint HS93I, ask a question using the form below. If a user had a similar problem with Hotpoint HS93I it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)