-
Optoma DS327 - page 1
EN-1 CONTENTS Usage Notice ............. .............. .............. .............. .............. .............. .. 2 Safety Instructions ............................................................................................ ............... ...... 2 Introduction . .............. ........... .............. .............. .............. .... ...
-
Optoma DS327 - page 2
EN-2 Usage Notice Safety Instructions Read all of these instructions befo re you operate yo ur projector and save for future reference. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Notes and warnings All notes and warnings in the oper ating instructions should be adhered to. 3. C ...
-
Optoma DS327 - page 3
EN-3 8. Replacement p arts When replacement pa rts are requir ed, be sure that the replacement part s are specified by the manufacture. Unauthorized substitutions may result in fire, elect ric shock or other haza rds. 9. Moisture Conden sation Never operate this projector immediately af ter moving it from a cold location to a warm one. When the pro ...
-
Optoma DS327 - page 4
EN-4 Notes on the AC Power Cord AC Power Cord must meet the requirement of countries where yo u use this projector . Please confirm your AC pl ug type with the graphi cs below and ensure that the p roper AC Power Cord is used. If the supplied AC Power Cord does not match your AC outlet, please cont act your sales dealer . This projector is eq uippe ...
-
Optoma DS327 - page 5
EN-5 Introduction Projector Features The projector integrates high-pe rformance optical e ngine projection and a us er - friendly design to deliver high reliability and eas e of use. The projecto r offers the following featur es: Single chip 0.55" T e xas Instruments DLP ® technology SVGA (800 x 600 pixels) XGA (1024 x 768 pixels) ...
-
Optoma DS327 - page 6
EN-6 Package Content s When you unpack the proj ector , make sure you have all these components: Note For European w arrant info rmation please visit www .optomaeurope. com Due to the di fference in applications for ea ch country , some r egions may have diffe rent accessorie s. Contact you dealer immediately if any ite ms are missing, ...
-
Optoma DS327 - page 7
EN-7 Projector Overview Front View Front IR remote control sensor Control panel Elevator foot Zoom ring Projection lens Focus ring S peaker Lamp cover V entilation holes 3 2 1 5 6 7 8 9 4 1 6 2 7 3 8 4 9 5 ...
-
Optoma DS327 - page 8
EN-8 Rear View AC power socket Connection ports (HDMI is only on certain models) Kensington lock Bottom V iew Security bar Ceiling mount holes V entilation holes Note This projector can be used with a ceiling mo unt f or support. The ceil ing mount is not incl uded in the package. Contact your dealer for informat ion to mount the projector ...
-
Optoma DS327 - page 9
EN-9 Using the Product Control Panel Power T urn the projecto r on or off. SOURCE Switch between input signals. MENU/EXIT Display or exit the on -screen display menus. Keystone ( / ) Manually correct distorted images resulting from an angled proje ction. Four directional buttons Use four directiona l buttons to select items or make adju stments to ...
-
Optoma DS327 - page 10
EN-10 Connection Port s AUDIO IN Connect an audio output from video e quipment or compute r to this jack. HDMI (HDMI is only on certain models) Connect HDMI output from video equipme nt to this jack. S-VIDEO Connect S-V ideo output from vide o equipment to this jack. VGA1-IN/YPbPr Connect image input signal (analog RGB or componen t) to this jack. ...
-
Optoma DS327 - page 11
EN-11 Remote Control Switch Switch to mouse m ode when the on-screen menus ar e close. Source Switch between input signals. Four directional buttons Use four directional buttons to select items or make adjustmen ts to your selection . Lef t mouse Perform the lef t button of the mouse when mouse mode is activated. Keystone ( / ) Manually cor rect di ...
-
Optoma DS327 - page 12
EN-12 Enter Confirmed selections. Right mouse Perform the right button of the mouse when mouse mo de is activated. V olume ( / ) Adjust the volume level. Menu Display on-screen display menus. ZOOM Magnifies or reduces the projected picture size. AV m u t e Cut off the A V Mute temporarily . Only pressing A V Mute again can output sound and image. I ...
-
Optoma DS327 - page 13
EN-13 Inst alling the Batteries 1. Open the battery cover in the direction shown. 2. Install batteries as indicated by the diagram inside the comp artment. 3. Close the battery cover into position. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Make sure th ...
-
Optoma DS327 - page 14
EN-14 Remote Control Operation Point the remote control at the infrare d remote sensor and press a button. Operating the projector from the front Note The remote control may not operate wh en there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a positi on where ...
-
Optoma DS327 - page 15
EN-15 Connection When connecting a signal source to th e projector , be sure to: 1. T urn all equ ipment of f before makin g any connection s. 2. Use the correct signal cab les for each sour ce. 3. Ensure the cables are firmly inserted. 1. ........................... ...................... ........................... ................ *Audio cable 2 ...
-
Optoma DS327 - page 16
EN-16 Connecting a computer or monitor Connecting a computer The projecto r provides tw o VGA input sockets that allow you to conn ect them to both IBM ® compatibles a nd Macintosh ® computers. A Mac adapter is needed if you are connecting legacy version Macintosh comp uters. T o connect the projector to a notebook or desktop computer: 1. T ake t ...
-
Optoma DS327 - page 17
EN-17 Connecting V ideo source devices Y ou can conn ect your projector to vari ous V ideo source devices th at provide any one of the following outpu t sockets: HDMI Component V ideo S-Video Video (composite) Y ou need only connect th e projector to a V ideo source device using just one of the abov e connecting m ethods, however ea ...
-
Optoma DS327 - page 18
EN-18 Connecting an HDMI source device Examine your Vi deo source device to determin e if it has a set of unused HDMI output jacks available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. T o connect the projector to an HDMI source device: 1. T ake an HDMI c ...
-
Optoma DS327 - page 19
EN-19 Connecting an S-V ideo source device Examine your V ideo source device to de te rmine if it has an unused S-V ideo output socket available: If so, you can continue with this procedure. If not, you will need to reassess whic h method you can use to connect to the device. T o connect the projector to an S-Vi deo source device: 1. T ake ...
-
Optoma DS327 - page 20
EN-20 Connecting a composit e V ideo source device Examine your Vi deo source device to determin e if it has a set of unused composite Vi deo output socket s available: If so, you can continue with this procedure. If not, you will need to reassess which method you can use to connect to the device. T o connect the projector to a composit e V ...
-
Optoma DS327 - page 21
EN-21 Operation Powering On/Off the Projector Powering On the Projector: 1. Complete t he AC power cor d and periph eral signal cab le(s) connec tions. 2. Press to turn on the projector . The projector t akes a minute or so to warm up. 3. T urn on your source (computer , notebook, DVD, etc.). Th e projector automatically detects your source. If ...
-
Optoma DS327 - page 22
EN-22 Adjusting the Projector Height The projector is equippe d with an elevator foot to adjust the ima ge height. T o raise or lower the image, turn the el evator foot to fi ne-tune the height. Note T o avo id damaging the proj ector , make sure that t he elevator foot is fully retr acted before placing the proj ector in its carrying case. Adj ...
-
Optoma DS327 - page 23
EN-23 Adjusting Projection Image Size Refer to the graphic a nd table below to d etermine the sc reen size and projection distance. Note Position the pr ojector in a hori zontal positio n; other positions can cause h eat build-up and damage to the projecto r. Keep a space of 30 cm or more between t he sides of the projector. Do not use ...
-
Optoma DS327 - page 24
EN-24 Menu Operation The projector has mu ltilingual on-scree n display menus that allow you to make image adjustment s and change a variety of settings. How to operate 1. Press MENU on the projector or Menu on the remote control to open the OSD menu. 2. When OSD is displayed, u se / to select any feature in the main menu. 3. Afte r selecting the d ...
-
Optoma DS327 - page 25
EN-25 Presentation, Bright, Movie, sRGB, User, Classroom, Black Board, 3D ...
-
Optoma DS327 - page 26
EN-26 Image Brightness Brighten or darken the image . Contrast Set the difference b etween light a nd dark area s. Color Sett ings Adjust the color temperature. At hig h er temperature the screen looks colder; at lower temperature, the scr een looks warmer . If you select “User”, then you can change the intensity of each of 3 color ( Red, Green ...
-
Optoma DS327 - page 27
EN-27 There are ma ny factory presets optimize d for various types of images. Present ation: For computer or note book. Bright: For bright environm ent. Movie: For home theater . sRGB: For PC s tandard color . User: Memorize user’s settings. Classroom: For projection in the classroom. Black Board: For black projection ...
-
Optoma DS327 - page 28
EN-28 Signal Frequency Adjust the timing of the projector relative to the computer . T racking Adjust the ph ase of the projector rela tive to the com puter . H Positi on (Horizon t al Position ) Adjust the image left or right with in the projection area. V Position (V ertical Position) Adjust the image up or down within the projection area . ...
-
Optoma DS327 - page 29
EN-29 Vid e o I m ag e Color Adjust a vide o image fro m black and w hite to fully s aturated color . Sharpness Sharpen or sof ten the image. Tin t Shift colors towar d red or green. Sound Vo l u m e Adjust the volume level. Mute Cut off the sound temp orarily . ...
-
Optoma DS327 - page 30
EN-30 Setting Menu Position Choose the menu location on th e display screen. Projection Adjust the picture to match the orient atio n of the projector: upright or up side- down, in fr ont of or be hind the scr een. Invert o r reverse the image accordingly . Color S p ace Select an appropriate color matr ix type from RGB,YCbCr/YPbPr . Lamp Time Disp ...
-
Optoma DS327 - page 31
EN-31 Source Lock On: The projector will search specified c onnection port. Off: The projector will search for other si gnals if the current input signal is lost. Bright Mode ECO: Choose “ECO” to dim the pr ojector lamp which will lower power consumption and extend the lamp life by up to 120%. Bright: Choose “Bright” to incr ...
-
Optoma DS327 - page 32
EN-32 Language Select the language used by the on- screen menu. Factory Defaul t Restore settings to factory defaul t . ...
-
Optoma DS327 - page 33
EN-33 Appendix Replacing the Lamp As the projector operates ov er time, the brightness of the projecto r lamp gradually decreases and th e lamp becomes more susceptible to breaka ge. We reco mmend replacing the lamp if a warnin g message is displayed. Do not attempt to replace the lamp yo urself. Contact the qualified service personnel for replacem ...
-
Optoma DS327 - page 34
EN-34 1. T urn of f the proje ctor . 2. If the projector is insta lled in a ceiling mount, remove it 3. Unplug the power cord. 4. Remove the screw in the side of the lamp cover . 1 5. Remove the cover . 2 6. Loosen the screws from the lamp module. 3 7. Raise the handle, and lif t out the module. 4 8. Insert the new lamp modu le into the proje ctor ...
-
Optoma DS327 - page 35
EN-35 Ceiling mount inst allation 1. T o prevent damage to your projecto r , please use the Optoma ceiling mount. 2. If you wish to use a third party ceili ng mount kit, please ensure the screws used to att ach a mount to the projector meet the following specifica tions: Screw type: M4*3 Maximum screw length: 8mm Minimum screw length : ...
-
Optoma DS327 - page 36
EN-36 Comp atibility Modes Computer: Mode Resolution H-Sync [KHz] V -Syn c [Hz] 640 x 350 31.5 70 640 x 350 37.9 85 720 x 350 31.5 70 640 x 400 31.5 70 640 x 400 37.9 85.1 720 x 400 31.5 70 720 x 400 37.9 85 720 x 576 - 50 720 x 576 - 60 VGA 640 x 480 31.5 60 -6 7 37.9 72.8 37.5 75 43.3 85 SVGA 800 x 600 35.2 56.3 37.9 60.3 46.9 75 48.1 72.2 -8 0 5 ...
-
Optoma DS327 - page 37
EN-37 WXGA-800 1280 x 800 - 60 SXGA 1280 x 1024 64 60 80 75 91.1 85 1366 x 768 - 60 1440 x 900 55.935 60 SXGA+ 1400 x 1050 - 60 UXGA 1600 x 1200 75 60 HDTV 1920 x 1080 33.8 30 1920 x 1080 28.1 25 1920 x 1080i - 50 1920 x 1080i - 60 1920 x 1080p - 24 1920 x 1080p - 25 1920 x 1080p - 30 1920 x 1080p - 50 1920 x 1080p - 60 1280 x 720 45 60 1280 x 720p ...
-
Optoma DS327 - page 38
EN-38 Video: NTSC NTSC M/J, 3.58MHz, 4.43MHz P AL P AL B/D/G/H/I/M/N, 4.43MHz SECAM SECAM B/D/G/K/K1/L, 4.25/4.4 MHz SDTV 480i/p, 576i/p HDTV 720p(50/60Hz), 1080i(50/60Hz), 1 080P(50/60Hz) ...
-
Optoma DS327 - page 39
EN-39 RS232 Commands and Protocol Function List RS232 Pin Assignment s D-Sub 9 pin 11 C D 2R X D 3T X D 4D T R 5G N D 6D S R 7R T S 8C T S 9R I Wire Li st C1 COLOR C2 1 Black 1 2B r o w n 2 3R e d 3 4O r a n g e 4 5 Y ellow 5 6 Green 6 7B l u e 7 8 Purple 8 9W h i t e 9 SHELL DW SHELL ...
-
Optoma DS327 - page 40
EN-40 RS232 Protocol Function List Note There is a <CR> after all ASCII commands. 0D is the HEX code for <CR> in ASCII code. Baud Rate : 9600 Da ta B its : 8 Parity: None St o p B i t s : 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F XX=01-99, projector' s ID, XX=00 is f ...
-
Optoma DS327 - page 41
EN-41 ~XX45 n 7E 30 30 34 34 20 a 0D Color (Satura tion) n = 0 (a=30) ~ 10 0 (a=31 30 30) ~XX44 n 7E 30 30 34 35 20 a 0D Tint n = 0 (a=30) ~ 100 (a=31 30 3 0) ~XX60 1 7E 30 30 36 30 20 31 0 D Format 4:3 ~XX60 2 7E 30 30 36 30 20 32 0 D 16:9-l ~XX60 3 7E 30 30 36 30 20 33 0 D 16:9-ll ~XX62 n 7E 30 30 36 32 20 a 0D Zoom n = -5 (a=2D 35 ) ~ 5 (a=35) ~ ...
-
Optoma DS327 - page 42
EN-42 ~XX140 10 7E 30 30 31 34 30 20 31 30 0D Up/Page + ~XX140 1 1 7E 30 30 31 34 30 20 31 31 0D Left/ Source ~XX140 12 7E 30 30 31 34 30 20 31 32 0D Enter (for pro jection MENU) ~XX140 13 7E 30 30 31 34 30 20 31 33 0D Right/Re-SYNC ~XX140 14 7E 30 30 31 34 30 20 31 34 0D Down/Page - ~XX140 15 7E 30 30 31 34 30 20 31 35 0D Keystone + ~XX140 16 7E 3 ...
-
Optoma DS327 - page 43
EN-43 T roubleshooting Refer to the symptoms and measures listed below before sending the projector for rep airs. If the problem persist s, contact your lo cal reseller or service center . Please refer to "LED Indicato r Messages" a s well. St art-up problems If no lights turn on: Be sure that the powe r cord is securely connected to ...
-
Optoma DS327 - page 44
EN-44 LED Indicator Messages Projector St atus POWER TEMP LAMP St andby mode Blue solid Off Off Normal running mode Flashing 30 seconds after powering on and then become solid blue Off Off Normal cooling Blue solid Blue solid Red solid Lamp ignition failed Blue solid Off Red flashing Lamp life end Blue solid Off Red solid T emp error Blue solid Blu ...
-
Optoma DS327 - page 45
EN-45 Optoma Global Offices For service or support please cont act your local of fice. USA 3178 Laurelview Ct. Fremont, CA 94538, USA 888-289-6786 www .optomausa.com services@optoma.com Canada 5630 Kennedy Road, Mississa uga, 905-361-2582 ON, L4Z 2A9, Canada 905-361-2581 www .optoma.ca services@optoma.com Europe 42 Caxton W ay , The W atfor d Busin ...
-
Optoma DS327 - page 46
EN-46 Lerpeveien 25 +47 32 98 89 90 3040 Drammen +47 32 98 89 99 Norway info@optoma.no PO.BOX 9515 3038 Drammen Norway Latin Americ a 3178 Laurelvie w Ct. Fremont, CA 94538, USA 888-289-6786 www .optoma.com.br www .optoma.com.mx Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Ka ngnam-Ku, +82+2+3443000 4 seoul,135-815, KOREA +82+2+34430005 Japan ? ...
-
Optoma DS327 - page 47
EN-47 Changning District +86-21-629473 75 Shanghai, 200052, Ch ina www .optoma.com.cn ...
-
Optoma DS327 - page 48
EN-48 Regulation & Safety Notices This appendix lists th e general notices of your proj ector . FCC Notice This equipment has been tested and found to comp ly with the limits fo r a Class B digital device, pursuant to part 1 5 of the FCC Rules. These limit s are designed to provide re asonable protecti on against har mful interference in reside ...
-
Optoma DS327 - page 49
EN-49 Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interf erence received, including interfer ence that may cause undesired operation . Notice: Canadian users This Class B digital app ...
-
Optoma DS327 - page 50
EN-50 Remote Control Power T urn the projector on or of f. L Button Perform the lef t button of the mouse. R Button Perform the right button of the mouse. Page + Perform pa ge up function. Page - Perform pa ge down function. Enter/ /Help? Confirm your item selection. ? Open the Help Menu. Source Switch between input signals. Re-SYNC Automatically s ...
-
Optoma DS327 - page 51
EN-51 Freeze Freeze the projected image. AV m u t e Cut off the A V Mute temporarily . Only pressing A V Mute again can output sound and image. If any other buttons are pressed, the projection image will become abnormal and no sound will be output. S-V ideo Display S-Video signal. VGA Switch input source to VGA1 or VGA2 by sequence. Vide o Display ...
Do you have a question concerning Optoma DS327?
Use the form below
If you did not solve your problem by using a manual Optoma DS327, ask a question using the form below. If a user had a similar problem with Optoma DS327 it is likely that he will want to share the way to solve it.