-
Smeg Dishwasher ADP8252 - page 1
DISHW ASHER How to get the most from your Fully Integrated Dishwasher ADP 8252 ...
-
Smeg Dishwasher ADP8252 - page 2
A Helping Hand on the Home Front Page No. 1,2 & 3 4 & 5 6 7 8 9 & 10 11 12 13 14 15 & 16 17 18 Installation Loading Y our Dishwasher Detergent and Rinse Aid Dispenser W ater Softener The First W ash T able of Programs Cleaning and Maintenance How to Deal with Small Problems General and T echnical Details Not W orking Properly? Elect ...
-
Smeg Dishwasher ADP8252 - page 3
Installation 1 Y our brand new dishwasher complies with stringent EEC specifications and is fully compatible with any 600mm deep kitchen units. If you are reasonably handy at DIY , installing your dishwasher should be relatively straight forward as long as you stick to the following guidelines. If you have any doubts about installing this product w ...
-
Smeg Dishwasher ADP8252 - page 4
Installation cont... Stage 1 2 Supplied with the appliance is a metal anti-condensation strip, this should be fixed to the underside of your worktop along the front edge (via the two outer screws). Also supplied with the appliance are two plastic skids, which should be positioned below the adjustable feet and allow the appliance to positioned easil ...
-
Smeg Dishwasher ADP8252 - page 5
Installation cont... Stage 4 3 Position the decor door onto the front of the dishwasher by locating the brackets into the two mouldings mounted either side on the top of the door . NO TE: to remove the door a small plastic tool is provided. This should be inserted into the small black mouldings on the side of the door , rotated and pulled away from ...
-
Smeg Dishwasher ADP8252 - page 6
Loading Loading the bottom basket 4 The dishwasher has a capacity of 12 place-settings including serving dishes. Before loading the dishes, remove the largest scraps of food to avoid blocking the filter . V ery dirty pans of frying-pans must be soaked in water before they are placed in the dishwasher , to allow food waste to be removed more easily ...
-
Smeg Dishwasher ADP8252 - page 7
IMPORT ANT NO TE In the interest of general safety do not place long bladed knives in the cutlery basket. These items should be laid flat, so as not to cause potential accidental injury when unloading y our dishwasher . Loading cont... Adjusting the T op Basket 5 The top basket can be in two dif ferent positions depending on the height of the dishe ...
-
Smeg Dishwasher ADP8252 - page 8
W ARNING After loading, ensure that both spray arms are free to r otate . W e cannot accept responsibility for dama g e caused by incorrect loading. Y our Dishwasher 6 1 2 3 4 5 6 7 8 Upper Basket Upper Basket Spray Arm Lower Basket Spray Arm Lower Basket Salt Container Filters Detergent Dispenser and Rinse Aid Container Cutlery Basket ...
-
Smeg Dishwasher ADP8252 - page 9
Deter gent and Rinse Aid Dispenser Filling with deter gent 7 The detergent and rinse aid dispenser are on the inside of the door . The detergent dispenser is on the left and the rinse aid dispenser is on the right. Fill the dispenser with detergent bef ore each wash. T o open the detergent dispenser press the button gently . The lid will spring out ...
-
Smeg Dishwasher ADP8252 - page 10
W ater Softener Filling with salt 8 The dishwasher is equipped with an automatic softener which uses regenerating salts specially developed for dishwashers to remove hardening substances from the water . Hard water leaves whitish marks on the dry dishes, and dishes gradually lose their shine over time. The appliance is preset to dispense the right ...
-
Smeg Dishwasher ADP8252 - page 11
The First W ash Switching on 9 The dishwasher must not be turned on until the dishes have been loaded, the dispenser has been filled with detergent, a check has been made that the spray arms turn freely , and the door has been shut. The water tap must also be turned on and salt placed in the container . T o simplify programming and communication, t ...
-
Smeg Dishwasher ADP8252 - page 12
The First W ash cont... Deleting/Changing the Programme 10 T o abort a programme in progress simply open the door and select programme "P0". When the door is closed, the dishwasher will force an early end to the programme. T o change a programme already in progress simply set the new number corresponding to the programme desired. When the ...
-
Smeg Dishwasher ADP8252 - page 13
T able of Programs 11 No. Cycle Load T ype Prewash W ash Drying Eco 1 st Rinse 2 st Rinse Rinse Aid Rinse 1 2 2 3 4 4 5 5 6 6 7 8 YES NO NO NO YES NO YES NO YES NO 45°C NO NO 45°C 45°C 45°C 65°C 65°C 55°C 55°C 70°C 70°C 70°C NO NO YES YES YES YES YES YES YES YES YES YES NO NO NO NO YES NO NO NO NO YES YES YES YES NO 65°C 55°C NO 65°C ...
-
Smeg Dishwasher ADP8252 - page 14
Cleaning and Maintenance 1 2 Cleaning the Appliance Make sure that the appliance is disconnected from the electrical mains. The outside surfaces and the inside of the door of the dishwasher must be cleaned regularly with a soft, damp cloth. Never use abrasive or acid deter g ents. The door seals must be cleaned with a damp sponge. The outside of th ...
-
Smeg Dishwasher ADP8252 - page 15
How to Deal with Small Problems 1 3 If the dishwasher is to be out of use for a long period The following precautions must be taken: - perform two consecutive pre-rinses; - disconnect the plug from the mains; - leave the door slightly open so that no unpleasant smells can form; - turn off the water tap. Before r e-using the dishwasher after a lay-o ...
-
Smeg Dishwasher ADP8252 - page 16
General and T echnical Details 14 T echnical Details Capacity Intake Power Supply V oltage Fuse Rating Width of Appliance Depth of Appliance Dimension with Door Open 12 place settings 1÷9 bar 230 V 13 Amps 60 cm 57 cm 11 6 c m EN 50242 EN 50242 ...
-
Smeg Dishwasher ADP8252 - page 17
Not W orking Properly? Check These Points First 15 The electronic control system is capable of detecting 6 possible dishwasher malfunctions. Therefore before calling the After-Sales Service, users are advised to consult the list below , and in all cases to make a note of the error messages. Alarm E1 NOT USED ON THIS APPLIANCE. Alarm E2 The system w ...
-
Smeg Dishwasher ADP8252 - page 18
Not W orking Properly cont... If the dishes are not clean at the end of the pr ogram 16 Check whether: - the right washing program has been used; - the detergent dispenser has opened correctly; - the right amount of detergent has been placed in the dispenser; - the dishes have been arranged correctly; - the spray-arms turn freely; - the water tap h ...
-
Smeg Dishwasher ADP8252 - page 19
Electrical Connections IMPOR T ANT : ENSURE THA T THE ELECTRICITY SUPPL Y IS SWITCHED OFF BEFORE CONNECTING. 1 7 Y our appliance must be connected to fixed wiring via the use of a double pole switched fused spur outlet with at least 3mm contact separation. (See technical data for fuse rating). We strongly recommend the appliance is connected by a q ...
-
Smeg Dishwasher ADP8252 - page 20
12 Months Guarantee 18 Procedur e when repor ting a fault Give full name, address including post code, home telephone number and business telephone number if appropriate. 1. Quote sales receipt number , make and model number of faulty appliance. This product's reference is as follows: ADP 8252 2. 08457 959722 LO W CALL SER VICE LO W CALL SER V ...
Do you have a question concerning Smeg Dishwasher ADP8252?
Use the form below
If you did not solve your problem by using a manual Smeg Dishwasher ADP8252, ask a question using the form below. If a user had a similar problem with Smeg Dishwasher ADP8252 it is likely that he will want to share the way to solve it.