English dropdown-ico

Manual Smeg PV175CB

22 pages Not applicable
Download

Go to site of 22

Summary
  • Smeg PV175CB - page 1

    Contents 25 EN 1 Instructions 26 1.1 General safety instructions 26 1.2 Manufacturer liability 27 1.3 Appliance purpose 27 1.4 Disposal 27 1.5 Identification plate 28 1.6 This user manual 28 1.7 How to read the user manual 28 2 Description 29 2.1 General Description 29 2.2 Symbols 30 2.3 Available accessories 30 3 Use 31 3.1 Instructions 31 3.2 Fir ...

  • Smeg PV175CB - page 2

    Instructions 26 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Never touch the heating elements during use. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • Children must never play with the appl ...

  • Smeg PV175CB - page 3

    Instructions 27 EN 1.2 Manufacturer liability The manufacturer declines all liability for damage to persons or property caused by: • use of the appliance other than the one envisaged, • non-observance of the user manual provisions, • tampering with any part of the appliance, • use of non-original spare parts. 1.3 Appliance purpose This appl ...

  • Smeg PV175CB - page 4

    Instructions 28 1.5 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance. Do not remove the identification plate for any reason. 1.6 This user manual This user manual is an integral part of the appliance and must therefore be kept in its entirety and in an accessible place for the who ...

  • Smeg PV175CB - page 5

    Description 29 EN 2 Description 2.1 General Description 60 cm 70 cm AUX = Auxiliary SR = Semi-rapid RR = Reduced rapid R1= Large rapid R2 = Medium rapid ...

  • Smeg PV175CB - page 6

    Description 30 2.2 Symbols Cooking zones Front left Rear left Central Rear right Front right Centre left Burner knobs Useful for lighting and adjusting the hob burners. Press and turn the knobs anti- clockwise to the value to light the relative burners. T urn the knobs to the zone between the maximum and minimum setting to adjust the flame. Return ...

  • Smeg PV175CB - page 7

    Use 31 EN 3 Use 3.1 Instructions 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from accessories. 3. Remove and wash all the appliance accessories (see 4 Cleaning and maintenance). Impr oper use Danger of burns • Make sure t ...

  • Smeg PV175CB - page 8

    Use 32 3.3 Using the hob All the appliance's control and monitoring devices are located together on the front panel. The burner controlled by each knob is shown next to the knob. The appliance is equipped with an electronic ignition device. Simply press the knob and turn it anti- clockwise to the maximum flame symbol, until the burner lights. ...

  • Smeg PV175CB - page 9

    Use 33 EN Practical tips for using the hob For better burner efficiency and to minimise gas consumption, use pans with lids and of suitable size for the burner, so that flames do not reach up the sides of the pan. Once the contents come to the boil, turn down the flame far enough to ensure that the liquid does not boil over. T o prevent burns or da ...

  • Smeg PV175CB - page 10

    Cleaning and maintenance 34 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance T o keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Ordinary daily cleaning Always use only specific products that do not contain abrasives or chlorine-based acids. Pour the product onto a damp clo ...

  • Smeg PV175CB - page 11

    Cleaning and maintenance 35 EN Cooking hob grids Remove the grids and clean them with lukewarm water and non-abrasive detergent. Make sure to remove any encrustations. Dry them thoroughly and return them to the hob. Flame-spreader crowns and burner caps For easier cleaning, the flame-spreader crowns and the burner caps can be removed. W ash them in ...

  • Smeg PV175CB - page 12

    Installation 36 5 Installation 5.1 Safety instructions V eneers, adhesives or plastic coatings on adjacent furniture should be temperature- resistant ( >90°C ), otherwise they might warp over time. The minimum distances must also be respected for the edges of the hob on the back as indicated in the mounting illustrations. 5.2 Section cut from t ...

  • Smeg PV175CB - page 13

    Installation 37 EN 5.3 Mounting Over built-in ov en The distance between the hob and the kitchen furniture or other installed appliances must be enough to ensure sufficient ventilation and air discharge. If installed above an oven, a space must be left between the bottom of the hob and the top of the appliance installed below. Over empty kitchen un ...

  • Smeg PV175CB - page 14

    Installation 38 Hob seal T o prevent leakage of liquid between the frame of the hob and the work surface, place the adhesive seal provided along the entire outer edge of the hob before assembly. 5.4 Fixing brackets Screw the fixing brackets ( A ) into the holes on the sides of the bottom casing to properly fasten the hob to the structure. 5.5 Gas c ...

  • Smeg PV175CB - page 15

    Installation 39 EN Carefully screw the connector 3 to the gas connector 1 of the appliance, placing the seal 2 between them. Connection with a flexible steel hose with conical fitting Make the connection to the gas mains using a continuous wall flexible steel hose whose specifications comply with the applicable standard. Carefully screw the hose co ...

  • Smeg PV175CB - page 16

    Installation 40 Extraction of the combustion products The combustion products may be extracted by means of hoods connected to a natural draught chimney whose efficiency is certain or via forced extraction. An efficient extraction system requires precision planning by a specialist qualified in this area and must comply with the positions and distanc ...

  • Smeg PV175CB - page 17

    Installation 41 EN Removing the hob top 1. Remove the grids from the hob. 2. Remove the flame-spreader crowns and relative burner caps. 3. Pull the knobs upwards to remove them. 4. Unscrew the burner rings using the supplied wrench. 5. Remove the top. ...

  • Smeg PV175CB - page 18

    Installation 42 Replacing nozzles 1. Unscrew screw A and push air regulator B as far as it will go. 2. Use a spanner to remove the nozzles C and install the new ones for the required gas supply, following the indications given in the relevant table (see “Gas types and Countries”). 3. Adjust the air flow by moving the air regulator B to obtain t ...

  • Smeg PV175CB - page 19

    Installation 43 EN Adjusting the minimum setting for LPG T ighten the screw located at the side of the tap rod clockwise all the way. Lubricating the gas taps Over time the gas taps may become difficult to turn and get blocked. Clean them internally and replace the lubrication grease. Following adjustment to a gas other than the one originally set ...

  • Smeg PV175CB - page 20

    Installation 44 Gas types and Countries N o Gas types IT GB-IE FR-BE DE AT NL ES PT SE RU DK 1 Natural Gas G20 G20 20 mbar •• •• ••••• G20/25 20/25 mbar • 2 Natural Gas G25 G25 25 mbar • 3 Natural Gas G25 G25 20 mbar • 4 LPG G30/31 G30/31 28/37 mbar •• • • G30/31 30/37 mbar •• G30/31 30/30 mbar •• • 5 LPG G ...

  • Smeg PV175CB - page 21

    Installation 45 EN Burner and nozzle characteristics tables Nozzles which are not provided are available at Authorised Service Centres. 1 Natural Gas G20 AUX SR RR R1 R2 Rated heating capacity (kW) 1.1 1.7 2.6 3.5 3.0 Nozzle diameter (1/100 mm) 76 95 117 135 126 Reduced capacity (W) 400 500 750 1050 1050 Primary air (mm) 1.0 1.0 1.0 1.5 1.5 2 Natur ...

  • Smeg PV175CB - page 22

    Installation 46 5.7 Electrical connection General information Check the grid characteristics against the data indicated on the plate. The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate for any reason. Perform the ground connection using a wire that is 20 ...

Manufacturer Smeg Category Stove

Documents that we receive from a manufacturer of a Smeg PV175CB can be divided into several groups. They are, among others:
- Smeg technical drawings
- PV175CB manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg PV175CB
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg PV175CB.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg PV175CB, service manual, brief instructions and user manuals Smeg PV175CB. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg PV175CB.

Similar manuals

A complete manual for the device Smeg PV175CB, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg PV175CB by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg PV175CB.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg PV175CB - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg PV175CB, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg PV175CB, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg PV175CB - which should help us in our first steps of using Smeg PV175CB
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg PV175CB
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg PV175CB in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg PV175CB?

Use the form below

If you did not solve your problem by using a manual Smeg PV175CB, ask a question using the form below. If a user had a similar problem with Smeg PV175CB it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)