English dropdown-ico

Manual Intellinet Wireless 150N 3G 524940

142 pages Not applicable
Download

Go to site of 142

Summary
  • Intellinet Wireless 150N 3G 524940 - page 1

    WIRELESS N 3G ROUTER USER MANUAL MODEL S 524681 & 524940 I N T - 524681/524940 - UM -0 809 - 02.5 ...

  • Intellinet Wireless 150N 3G 524940 - page 2

    Federal Communication s Comm ission Interfere nce Stat ement FCC Part 15 This equi pment has been tested and found t o comply with the limits for a Class B dig ital device, pursu ant to Part 15 of F CC Rules. These limits are desi gned to provide reasonable protection against harmful interference in a residential instal lation. This equipment gener ...

  • Intellinet Wireless 150N 3G 524940 - page 3

    cause harmful interference; and (2) This device must accept any interference re ceived, includin g interference th at may cause undes ired operation. Any changes or modi fications not expressly appr oved by the part y responsible for compliance could void the autho rity to operate the equipment. Federal Communications Commission (FCC) Radiati on Ex ...

  • Intellinet Wireless 150N 3G 524940 - page 4

    R&TTE Compl iance Sta tement This equipment complies wit h all the requirements of Directive 1999/5/E C of the E urope an Par liame nt and th e Cou ncil of Ma rch 9, 1 999, on radio equipment and telecommunicati on terminal equipment and the mutual recognit ion of their confor mity (R&TTE) . The R&TTE Directi ve repeals a nd replaces in ...

  • Intellinet Wireless 150N 3G 524940 - page 5

    Table of Contents CHAPTER I: PRODUCT INFORM ATION 1- 1 Introduction .......................................................................... 1 1- 2 Safety Information ................................................................ . 2 1- 3 System Requirements ........................................................... 3 1- 4 Package Contents ... ...

  • Intellinet Wireless 150N 3G 524940 - page 6

    2-5-7 Setu p Procedure fo r Telstra Big Pon d ............................. 54 2-5-8 Setu p Procedure fo r DNS ................................................ 55 2-5-9 Setu p Procedure fo r DDNS .............................................. 57 2- 6 Wired LAN Configuratio n s ................................................... 59 2-6- 1 LAN IP ... ...

  • Intellinet Wireless 150N 3G 524940 - page 7

    3-4 F ail Over ............................................................................ 113 3-5 Syste m Status ................................................................... 115 3-5- 1 System I nformation and F irmware V ersion .................... 115 3-5- 2 Internet Connection Status ............................................ 115 3-5- ...

  • Intellinet Wireless 150N 3G 524940 - page 8

    1 Chapter I: Product Information 1 - 1 Intr oduction and S afety I nformation Thank you for purch asing t his INTELLINET NE TWORK SOLUTIONS TM Wireles s 300N 3G Rou ter, Model 524681 , or Wirele ss 150 N 3G Ro uter, Model 524940 . T his high - speed wireless 3G broadband router supports both UMTS/ HSDPA a nd EVDO networks. When connecting a 3G / 3. ...

  • Intellinet Wireless 150N 3G 524940 - page 9

    2 1 - 2 Safety I nformation To maintain the safety of users a nd property, follo w these safety instructions: 1. This device is designed for indoor use only; DO NOT place this device outdoor s. 2. DO NOT put this devi ce in or near ho t or humid place s, like a kitchen or bathroom. Also, do not le ave this device in your car in hot weather . 3. DO ...

  • Intellinet Wireless 150N 3G 524940 - page 10

    3 1 - 3 System Requirements • Internet conne ction, provided b y xDSL or cab le modem or 3 G m o d e m . • Computer or n etwork device s with wir ed or wirel ess network i n t e r f a c e c a r d . • Web bro wser ( Firefox, Micr osoft I nternet Explorer 4.0 or above, Netscape Navigator 4. 7 or above, Opera W eb browser or Saf ari W e b browse ...

  • Intellinet Wireless 150N 3G 524940 - page 11

    4 1 - 5 Conne ctions and I ndicators Front Panel LED Name Light Status Description POWER On Router is switched on and correctl y powered. On Wirele ss WPS f unction is enable d. Off Wirele ss net work i s swit ched off. WLAN Flashing Wirele ss LAN activi ty (transfe rring or receiving data). On WAN por t is connect ed. Off WAN por t is not co nnect ...

  • Intellinet Wireless 150N 3G 524940 - page 12

    5 Back Panel Item Name Description Antenna A/B* These antennas are 3dBi dipole antennas. Radio ON/OFF Switch the button to activate or deactivate the wireless functions. Reset / WPS Reset the router to factory default settings (clear all settings) or start WPS function. Press this button and hold for 10 seconds to restore all settings to factory de ...

  • Intellinet Wireless 150N 3G 524940 - page 13

    6 Chapter II : System and Network Setu p 2 - 1 Network C onnection s 1. C onnect your USB modem to the USB port located on the front panel of the router. 2. Connect your xDSL / cabl e modem to th e WAN port of router by Ethernet cable . NOTE: G o to Section 3 - 4 Fail Over to assign the WAN con nection priority if y ou have subs cribed to both 3G a ...

  • Intellinet Wireless 150N 3G 524940 - page 14

    7 3. Co nnect all your computers, network devices (network - enabled consumer devices other than computers, like game console s or switch es / hub s ) to the LAN port of the router. 4. Connect the AC power adapt er to the wall socket , then connect it to the Power s ocket of the router. ...

  • Intellinet Wireless 150N 3G 524940 - page 15

    8 5. C heck all LEDs on the front panel. The P ower LE D sh o ul d be on ; the WAN, LAN and USB LEDs should be on if t he com puter / network device connected to t he respective port s of the router are p o w e re d o n a n d c o r re c t ly c o nn e ct e d . I f the Power L ED is not on, or if any LED you expected to be on is n’t , re - check th ...

  • Intellinet Wireless 150N 3G 524940 - page 16

    9 2 - 2 Connecting to the R outer via W eb B rowser After the net work connection is established , the next step is to set up the router with pr oper network parameters so it can work properly in your network envi ronment. Before you can connect to the router and start the configuration procedures, your computer must be abl e to obtain an IP addres ...

  • Intellinet Wireless 150N 3G 524940 - page 17

    10 2. Select “ Obtain an IP address from a DHCP server ” a n d t h e n c li c k “ OK. ” ...

  • Intellinet Wireless 150N 3G 524940 - page 18

    11 2 - 2 - 2 Windows 2 000 IP A ddress S etup 1. Click St art (at the lowe r- left corner of your desktop ), then click C ontrol P anel. Doub le - click the Network and D i al - up Connections icon; click Local Area Connection ; the Local Area Connectio n Properties window will appear. Select “ Inte rnet Protocol (TC P/IP) ” and then click “ ...

  • Intellinet Wireless 150N 3G 524940 - page 19

    12 2. Select “ Obtain an IP addre ss automatica lly ” and “ Obtain DNS server address automatically, ” then click “ OK. ” ...

  • Intellinet Wireless 150N 3G 524940 - page 20

    13 2 - 2 - 3 Windows X P IP A ddr ess S etup 1. Click St art (at the lower - left corner of your desktop ), then click C ontrol P anel. Double - click the Network an d Internet Connections icon, click Network Conn ections, then double - click Local Area Connection ; the Local Area Connection St atus window will appe ar. Click “ Properties .” ...

  • Intellinet Wireless 150N 3G 524940 - page 21

    14 2. Select “ Obtain an IP addr ess aut omatically ” and “ Obtain DNS server address automatically ,” then click “ OK. ” ...

  • Intellinet Wireless 150N 3G 524940 - page 22

    15 2 - 2 - 4 Windows V ista /7 IP A ddress S et up 1. Click St art (at the lower - left corner of your desktop ), then click C ontrol P anel. Click View Network Status and Ta sks , and then click Manage Ne twork Connec tions. Ri ght - click Local Area Network , then select “ Properties. ” T he Local Ar ea Connection Pr operties window will appe ...

  • Intellinet Wireless 150N 3G 524940 - page 23

    16 2. Select “ Obtain an IP addre ss automatica lly ” and “ Obtain DNS server address automatically, ” then click “ OK. ” ...

  • Intellinet Wireless 150N 3G 524940 - page 24

    17 ...

  • Intellinet Wireless 150N 3G 524940 - page 25

    18 2 - 2 - 5 Router IP A ddress L ookup After the IP address setup is complete, go to S tart, then R un at the bottom - lower corner of y our desktop: Input “ cmd, ” then c lick “ OK .” ...

  • Intellinet Wireless 150N 3G 524940 - page 26

    19 Input “ ipconfig, ” t he n p res s < Enter > . C heck the IP address followed by the d efault g ateway (i n this example, the IP address of the router is 192.168.2.1 ) . 3. Connect the router ’ s management int e rface by W eb browser After your comput er obtain s an IP address from the router, start your W eb browser and input the I ...

  • Intellinet Wireless 150N 3G 524940 - page 27

    20 Enter a user name and pa ssword in their res pective fi eld s ( default user name is “ admin ”; d efault password is “ 1234 ”). Cli ck “ OK ” b and you can see the W eb management interface of th e router . NOTE: If you can’t see the Web management interface and you’re being prompted to input the user name an d password again, it ...

  • Intellinet Wireless 150N 3G 524940 - page 28

    21 2 - 3 Using Quick Setup Quick Setup lets you complete all the required settings you need i n order to access the Inter net very quickly . Click “ Quick Setup ” on the left - hand navigation panel. T he following message will be di splayed: 1. Set Time Zone Below are descriptions of each option : Set Time Click and a drop - down list wi ll be ...

  • Intellinet Wireless 150N 3G 524940 - page 29

    22 Time Server Input the IP add ress / host nam e of time serve r Address (2): here . Daylight If the country yo u live in uses D aylight S aving, Savings (3): check “ Enable Function ” and choose the duration of D aylight S aving. After you fin ish the settings, click “ Next ” (4). NOTE: There are several time servers available on the Inte ...

  • Intellinet Wireless 150N 3G 524940 - page 30

    23 2. Broadband Type C hoose the broadband (Internet connecti on) type you ’ re using . T here are seven types of Internet connection s: 3G/3.5G - go to section 2 -3-1 Cable Modem - go to section 2 - 3-2 Fixed - IP xDSL - go to section 2 - 3-3 PPPoE xDSL - go to section 2 -3-4 PPTP xDSL - go to section 2 -3-5 L2TP xDSL - go to section 2 -3-6 Tels ...

  • Intellinet Wireless 150N 3G 524940 - page 31

    24 3. Basic Setting s Below are d escriptions of each option : Wireless Module ( 1) : C lick “ Enable ” to start using the wireless function of this ro uter, or select “ Disable ” to close the wireless inter face of this router. Band (2): S elect a b an d type from the drop - down list . It allows you to set the router at 802.11b or 802.11g ...

  • Intellinet Wireless 150N 3G 524940 - page 32

    25 ( maximum 3 2 cha racter s ) . SS ID is used to identify your ow n wireless rou ter from others when ther e are other wireless rout ers in the area. Default SSID is “I NTELLINET”; it ’ s recommended to chan ge the default SSID name to one that is easily recognizable, such as “ my home, ” “ office_room1, ” etc. Channel Number ( 4): ...

  • Intellinet Wireless 150N 3G 524940 - page 33

    26 4. Security Settings C hoose the Encryption type you ’ re using from the drop - down list . T here are three types of Encrypt ion : WEP - go to section 2 -7-3-2 WPA pre - shared key - go to section 2 -7-3-3 WPA RADI US - go to sec tion 2 -7-3-4 T o go back to a previous step, click “ Back ” at the bottom of th e page. 2 - 3 - 1 Setup P roc ...

  • Intellinet Wireless 150N 3G 524940 - page 34

    27 Below are d escriptions of each option : PIN Code (1): Enter a P in Code for your UMTS or H SDPA or EVDO connection . T his is optional, and is only required if your service provider asks you to do so. APN (2): Enter the APN code assi gned by your Internet service provider here. User Name (3): Enter the user name assigned by your Internet servic ...

  • Intellinet Wireless 150N 3G 524940 - page 35

    28 2 - 3 - 2 Setup P rocedure for Cable Modem Below are d escriptions of each option : Host Name (1): Enter the host nam e of your com pute r T his is optional, and is only required if your s ervice provider asks you to do so. MAC Addr ess (2 ): Enter the MAC add ress of you r comput er her e if your service provider only permits computer s with a ...

  • Intellinet Wireless 150N 3G 524940 - page 36

    29 2 - 3 - 3 Setup P rocedure for Fixed - IP xDSL Below are d escriptions of the options : IP address (1 ): Enter the IP address assigned by your service provider . Subnet Mask (2): Enter the subnet mask as signed by you r service provider . DNS Address (3 ): Enter the IP address of the DNS server provided by your service provi der. Defau lt Gatewa ...

  • Intellinet Wireless 150N 3G 524940 - page 37

    30 Below are d escriptions of each option : User Name (1): Enter the user name assigne d by your Intern et service provider here. Password (2): E nter the password ass igned by your In ternet service provider here. Service Name (3): Assign a name to this Internet se rvice ( optional ). MTU (4) : Enter the MTU value of you r network connection here. ...

  • Intellinet Wireless 150N 3G 524940 - page 38

    31 When yo u fini sh the settin gs, click “ Next ” ( 7) ; to go back to a previous menu, click “ Back. ” 2 - 3 - 5 Setup P rocedure for PPTP xDSL PPTP xDSL requires t wo kinds of set ting s : WAN I nterface S etting s (setup IP address) and PPTP S etting s (PPTP use r name and password). First, WA N I nterface S etting s: Select how you ob ...

  • Intellinet Wireless 150N 3G 524940 - page 39

    32 In ternet conn ection will fail eve n if the PPT P settings are corre ct. C ontact your Internet service provider if you don ’ t know how you should fill in these fields. N ext, PPTP S ettings: Below are d escriptions of each option : User Name (1): Enter the user name assigne d by your Intern et service provider here. Password (2): Enter the ...

  • Intellinet Wireless 150N 3G 524940 - page 40

    33 Connection Ty pe: S elect the connec tion type of Intern et (7) connection you w ant to use ( refer to the last section for detailed descriptions ). I dle Time Out (8): Enter the idle time out of the Interne t connection you w ant to use ( refer to the last section for detailed descriptions ). When yo u fini sh the settin gs, click “ Next ” ...

  • Intellinet Wireless 150N 3G 524940 - page 41

    34 Next, L2TP S ettings: Below are d escriptions of each option : User Name (1): Enter the user name assigne d by your Intern et service provider here. Password (2): Enter the password assigned by your Interne t service provider here. L2TP Gateway (3): Enter t he IP address of P PTP gateway assigned by your Internet service provider here. MTU (4) : ...

  • Intellinet Wireless 150N 3G 524940 - page 42

    35 2 - 3 - 7 Setup P rocedure for Telstra Big Pond This setting only works when you ’ re using Telstra B ig P ond ’ s network service in Australi a. User Name (1): Enter the user name a ssigned by Te lstra. Password (2): Enter the pas sword assig ned by Telstra. Assign login Check this box to choose a login server by server manually yourself. ( ...

  • Intellinet Wireless 150N 3G 524940 - page 43

    36 C lick “ Apply ” to prepare to restart the route r, and you ’ ll see this message: W ait for about 30 seconds, then click “ OK! ” Yo u’ ll be back to the router management interface, and the router is ready with new settings. ...

  • Intellinet Wireless 150N 3G 524940 - page 44

    37 2 - 4 Basic Setup In this chapter, y ou ’ ll see how to cha nge the time zon e, password a nd remote management settings. S tart your W eb browser and log on to the router ’s W eb management interface, then cl ick “ General Setup ” on the left (or click the “ General Setup ” link at the upper - right corner of the scre en) . 2 - 4 - ...

  • Intellinet Wireless 150N 3G 524940 - page 45

    38 Below are d escriptions of each option : Time Zone (1): S elect a time zone from the drop - down list. Time Server Enter the IP address or h ost name of the tim e Address (2): server here. Daylight C heck the “ Enable ” box and s et the duration Saving (3): of D aylight Savi ng. When yo u fini sh, click “ Appl y. ” You ’ ll see the fo ...

  • Intellinet Wireless 150N 3G 524940 - page 46

    39 2 - 4 - 2 Chang ing the M anagement P assword The d efault password of t hi s router is 1234, and it ’ s displayed on the login prom pt when acces sed from the W eb browser. There ’ s a security risk if you don ’ t chang e the default pas sword, since everyone can see it. This is very important when you have the wireless f unction enabl ed ...

  • Intellinet Wireless 150N 3G 524940 - page 47

    40 Re - enter the new passw ord if you see ab ove messag e. If you see the following message, the content in the “ C u rrent Pa ssword ” field is wrong. C lick “ OK ” to go bac k to the previous menu, an d try to enter the current password again . If the current an d new passwords are correctly ente red, after you click “ Apply ” you ? ...

  • Intellinet Wireless 150N 3G 524940 - page 48

    41 2 - 4 - 3 Remote Management This router does not allow management access from the Internet to prevent possible security risks (as when a too - simple password is used or when the default password isn’t c hanged ). However, yo u can still management this router from a specific IP address by enabling the Remote Management f unction. C lick “ S ...

  • Intellinet Wireless 150N 3G 524940 - page 49

    42 Click “ Continue ” to save the s ettings and go back to the W eb management interface; click “ Apply ” t o s a v e t h e s e tt i n g s a n d r e s t a r t the router so th e settings will take effect after it reboo ts. NOTE: When you want to manage this router from another computer on the Internet, you need to input the IP address and p ...

  • Intellinet Wireless 150N 3G 524940 - page 50

    43 2 - 5 Set ting U p the Internet C onnec tion (WA N ) Internet conne ction setup can be done by us i ng Quick Setup as described in Section 2 - 3. However, you can also set up WAN connections up by using the WAN conf iguration m enu. Y ou can also set advanced functions like DDNS (Dynamic DNS) here. C lick “ WAN ” on th e le f t side of the W ...

  • Intellinet Wireless 150N 3G 524940 - page 51

    44 PPTP - go to section 2 -5-5 L2TP - go to section 2 - 5-6 Telstra BigPond - go to section 2 -5-7 DNS - go to section 2 -5-8 DDNS - go to se ction 2 -5-9 2 - 5 - 1 Setup P rocedure for 3G / 3.5G Below are d escriptions of each option : PIN Code (1): Enter the P in Code for your U MTS or HSDPA connection . T his is optional, and is required only if ...

  • Intellinet Wireless 150N 3G 524940 - page 52

    45 Verify Password (5): Enter the password again for conf irmation. Service (6): S elect your c ard type from the dro p - down menu. AT Dial Script (7): Enter the dialed n umber for your UM TS or HSDP A connection . T he default is *99#. This field should no t be altered exce pt when required by your service provider. After you fin ish the settings ...

  • Intellinet Wireless 150N 3G 524940 - page 53

    46 2 - 5 - 2 Setup P rocedure for Dynamic IP Below are d escriptions of each option : Host Name (1): Enter the host name of your computer . T his is optional, and is only required if your service provider asks you to do so. MAC A ddress (2): Enter the MAC ad dress of your computer if your service provider only permits computer s w ith certain MAC a ...

  • Intellinet Wireless 150N 3G 524940 - page 54

    47 C lick “ Cont inue ” to go back and continue with the router setup, or click “ Apply ” to reboot the router so the settings w ill take effect. (W ait for about 30 seconds whil e the router is rebooting .) 2 - 5 - 3 Setup P rocedure for Static IP Below are d escriptions of each option : IP address (1 ): Enter the IP address assigned by yo ...

  • Intellinet Wireless 150N 3G 524940 - page 55

    48 message wi ll be displa yed on y our W eb browser: C lick “ Continue ” to go back and continue with the router setup, or click “ Apply ” to reboot the router so the settings w ill take effec t . (W ait for about 30 seconds whil e the router is rebooting .) If you want to re set all settings o n this page back to previously saved value s ...

  • Intellinet Wireless 150N 3G 524940 - page 56

    49 Password (2): Enter the password assigned by your Interne t service provider here. Service Name (3): Enter a name for this Interne t service. (T his is optional .) MTU (4) : Enter th e MTU value of y our network connection here. If you don ’ t know it, contact your ISP . Connection S elect the connection type of the Internet Type (5): connecti ...

  • Intellinet Wireless 150N 3G 524940 - page 57

    50 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router is rebooting .) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 2 - 5 - 5 Setup P r ...

  • Intellinet Wireless 150N 3G 524940 - page 58

    51 your Internet servi ce provider if you don ’ t know how you should fill in these fields. N ext, PPTP S ettings: Below are d escriptions of each option : User Name (1): Enter the user name assigne d by your Intern et service provider here. Password (2): Enter the password assigned by your Interne t service provider here. PPTP Gateway Enter the ...

  • Intellinet Wireless 150N 3G 524940 - page 59

    52 Connection S elect the connection type of the Internet Type (7): connection you w ant to use. (R efer to section 2-5- 3 for detailed descriptions. ) Idle Time Ou t (8): Ent er the idle time out of the Intern et connection you want to use. (R efer to section 2-5- 3 for detailed descript ions. ) When yo u fini sh the settin gs, click “ Apply ” ...

  • Intellinet Wireless 150N 3G 524940 - page 60

    53 Below are d escriptions of each option : User Name (1): Enter the user name assigne d by your Intern et service provider here. Password (2): Enter the password assigned by your Interne t service provider here. L2TP Gateway (3): Enter t he IP address of the PPTP gateway assigned by your Internet ser vi c e p ro v id er h er e. MTU (4) : Enter the ...

  • Intellinet Wireless 150N 3G 524940 - page 61

    54 If you w ant to reset all settings o n t his page back to previously saved value s , click “ Cancel .” 2 - 5 - 7 Setup P rocedure for Telstra Big Pond Th ese setting s only work whe n you ’ re using Telstra B ig P ond ’ s network service in Australia. User Name (1): Enter the user name a ssigned by Te lstra. Password (2): Enter the pas s ...

  • Intellinet Wireless 150N 3G 524940 - page 62

    55 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take eff ect . (W ait for about 30 seconds while the router is rebooting .) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 2 - 5 - 8 Setup P ...

  • Intellinet Wireless 150N 3G 524940 - page 63

    56 Below are d escriptions of each option : Primary DNS (1): Enter the IP address of the DNS server provided by your service provi der. Secondary DNS Enter the IP address of an other DNS se rver (2): provided by your service provider (this is optional ). After you fin ish the settings, click “ Apply ” (3) and the following message wi ll be disp ...

  • Intellinet Wireless 150N 3G 524940 - page 64

    57 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the settin gs will take effect. (W ait for about 30 seconds while the router is rebooting .) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 2 - 5 - 9 Setup P r ...

  • Intellinet Wireless 150N 3G 524940 - page 65

    58 Below are d escriptions of each option : Dynamic DNS (1): If y ou want to enable the DDNS f unction, sel ect “ Enabled ” ; otherwise , sele ct “ Disabled .” Provider (2): Select your DDNS service prov ider here. Domain Name (3): Enter the domain nam e you ’ ve obtained from the DDNS service prov ider. Account / Enter accou nt or e - ma ...

  • Intellinet Wireless 150N 3G 524940 - page 66

    59 procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router is rebooting .) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 2 - 6 Wired LAN Config urati on s Before all co mputers using wir ed Ethernet con nection ...

  • Intellinet Wireless 150N 3G 524940 - page 67

    60 Suggestions for a IP address numbering plan: If you have no idea how to define an IP address plan for your network, here are some suggestions. 1. A valid IP address has 4 fields: a.b.c.d. For most home and company users, it ’s suggested to use 192.168.c.d, where c is an integer between 0 and 254, and d is an integer between 1 and 254. This rou ...

  • Intellinet Wireless 150N 3G 524940 - page 68

    61 C lick LAN on the left side of the W eb management interface . T here are three setup groups here: “ LAN IP ,” “ DHCP Server ” and “ Static DHCP Leases Tabl e .” 2 - 6 - 1 LAN IP Below are descri ptions of th e options : IP address (1 ): Enter the IP address of this router. Subnet Mask (2): Enter the subnet mask for this network. 802 ...

  • Intellinet Wireless 150N 3G 524940 - page 69

    62 2 - 6 - 2 DHCP Server These settings are onl y ava ilable when “ DHCP Server ” in “ LAN IP ” is e nabled . Below are descript ions of the o ptions : Lease Time (1): C hoose a lease time (the duration that every computer can keep a specific I P address) of every IP address assigned by thi s router from the drop - down menu. Start IP (2) : ...

  • Intellinet Wireless 150N 3G 524940 - page 70

    63 2 - 6 - 3 Static DHC P Leases Table This function allows you to assign a stat ic IP address to a specific computer forever, so you don ’ t have to set the IP a ddress for a computer, but can still enjoy the benefit o f using DHCP s erver. A m aximum of 16 static IP addresses can be assigned here . (If you set “ Lease Time ” to “ foreve r ...

  • Intellinet Wireless 150N 3G 524940 - page 71

    64 After you cli ck “ Add ,” the MAC addre ss and IP addr ess mapping will be a dded to the Static DHCP Le as es Table section. If you want to de lete a specific item , check the “ Select ” box of a MAC ad dress and IP a ddress mapping (1), then cl ick “ Delete ” (2); if you want to de lete all mapping s, click “ Delete All ” (3). A ...

  • Intellinet Wireless 150N 3G 524940 - page 72

    65 2 - 7 Wirel ess LAN Conf igur ations If your compu ter, PDA, game console or othe r network devic e is equipped with a wirel ess network i nterface, you can use the wireless f unction of this router to let them connec t to the Internet and share resources with other computers with a wired LAN connection. You can also use t he built - in secu rit ...

  • Intellinet Wireless 150N 3G 524940 - page 73

    66 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the settings w ill take effect. (W ait for about 30 seconds while the router is rebooting .) 2-7- 1 Basic Wireless Settings C lick Wireles s on the left side of th e W eb management interface, then click “ Basic Sett ...

  • Intellinet Wireless 150N 3G 524940 - page 74

    67 SSID (2): This is the name of the wi reless router. Yo u can type any alph anumerical ch aracters here ( maximum of 32 characters ) . ESSID is used to identify your ow n wireless rou ter from others when ther e are other wireless rout ers in the same ar ea. The d efault SSID is “INTELLINET”; 2.4 GHz (B) 2.4GHz band only allows 802.11b wirel ...

  • Intellinet Wireless 150N 3G 524940 - page 75

    68 it ’ s recommended to change default ESSID name to one that is meaningfu l to you, such as “ myhome, ” “ office_r oom1, ” etc. Channel Number S elect a channel from the drop - down list . (3): A vailable channel numbers are 1 t o 13 for European countr ies ; 1 to 11 for the U . S. You can choose any channel number you want to use, and ...

  • Intellinet Wireless 150N 3G 524940 - page 76

    69 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router is rebooting .) 2-7- 2 Advanced Wireless Settings This router provides some advan ced control of wireless parameters . C lick Wireles s on th ...

  • Intellinet Wireless 150N 3G 524940 - page 77

    70 Below are descri ptions of th e options : Fragment Set the thres hold of the wirele ss radio . Threshold (1): Do no t modify the default value if you don ’ t know what it doe s ( default value i s 2346 ). RTS Threshold (2): Set the RTS thr eshold of the wir eless r adio. Do not modify the default value i f you don ’ t know what it doe s ( de ...

  • Intellinet Wireless 150N 3G 524940 - page 78

    71 your wireless router (set the option to “ Disable ” ) so only those who know the ESSID of your wireless router can connect . CTS Protect (10): Enabling this sett ing will redu ce the chance o f radio signal collisions between 802.11b and 802.11g/n wireless access points. It ’ s recommended to set this option to “ Auto ” or “ Always . ...

  • Intellinet Wireless 150N 3G 524940 - page 79

    72 2-7- 3 Wireless Security It ’ s very important to set wirel ess security settings properly! If you don ’ t, hackers and malicious users can reach your n e t w o r k a n d valuable data without your consent , causing a serio us security problem. C lick Wireles s on the left side of the W eb management interface, then click “ Security Settin ...

  • Intellinet Wireless 150N 3G 524940 - page 80

    73 Below are descri ptions of th e options : Key Length (2) : There are two types of WEP key length: 64 - bit and 128 - bit. “ 128 - bit ” is safer than “ 64 - bit ” but will red uce some d ata tran sfer per formance. Key Format (3): There are two types of key format: ASCII and Hex. When you select a key for mat, t he number of characters o ...

  • Intellinet Wireless 150N 3G 524940 - page 81

    74 key here ; if you enter mu ltiple WEP ke ys, they should all be different . Enable 802.1x IEEE 802.1x is an authentica tion protocol. Authentication (9): Every user must use a valid account to log in to this wireless ro uter before acc essing the wireless LAN. The authenti cation i s proces sed by a RA DIUS server. This mode o nly authenticates ...

  • Intellinet Wireless 150N 3G 524940 - page 82

    75 After you fin ish the WEP set ting s , click “ Apply ” (10) and the following will be displayed on yo ur W eb browser: C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 second s while the router reboot s. ) 2 - 7 ...

  • Intellinet Wireless 150N 3G 524940 - page 83

    76 Pre - shared Select the type of pre - shared key . Y ou Key Format (3): can select Passphrase (8 or more alphanumerical characters, up t o 63), or Hex (64 characters of 0 - 9 and a - f). Pre - shared Enter the WPA passp hrase here. Key (4): It ’ s not recommended to use a wor d that can b e found in a dictionary due to security reason s. After ...

  • Intellinet Wireless 150N 3G 524940 - page 84

    77 Below are descri ptions of th e options : WPA Unica st S elect a type of WPA cipher suite. O ptions are Cipher Suit e (2): “ WPA ( TKIP), ” “ WPA2 (AES) ” and “ WPA2 Mixe d. ” You can select any one of them, but you have to make sure your wireless c lient support s the cipher yo u selected. RADIUS Server Enter the IP address of y our ...

  • Intellinet Wireless 150N 3G 524940 - page 85

    78 2-7- 4 Wireless Access Control This function will help you to prevent unauthorized users fr om connecting to your wirel ess router; onl y those wireless devices who have the MAC add ress you assig ned here can gain access to your wireless ro uter. You can use thi s function with other security measures describe d in p revious section , to create ...

  • Intellinet Wireless 150N 3G 524940 - page 86

    79 Enable Wireless To enforce MAC address fi ltering, check Access Control ( 4): “ Enable Wirele ss Access Control .” When t his item is unche cked, the router w ill not enforce MAC addr ess f ilt ering of wirel ess cl ients . MAC Addr ess (5 ): Input the M AC addres s of your wirele ss devices here . D ashes ( - ) and colon s ( : ) a re not re ...

  • Intellinet Wireless 150N 3G 524940 - page 87

    80 2 - 7 - 5 Wi - Fi Protected Setup (WPS) Wi - Fi Protected Setup (WPS) is the simplest way to build a connection between wireless network clients and this wireless router. You don ’ t hav e to select an encryption mode or input a long encryption passphrase every ti me you need to set up a wireless client : Y ou only need to press a button on th ...

  • Intellinet Wireless 150N 3G 524940 - page 88

    81 Below are descri ptions of th e options : Enable WPS (1): Check this box to e nable WPS fun ction ; uncheck it to disable WPS. Wi - Fi Protect ed WPS - related system information will be Setup Informatio n displayed here: (2): WPS Status : If the wireless security ( encryption ) function of this w ireless router is p roperly set, you ’ ll see ...

  • Intellinet Wireless 150N 3G 524940 - page 89

    82 Configure Click “ Start PBC " to start Push Button - style by Push Button WPS setup pr ocedure. This wireles s route r will (4): wait for WPS reque sts from wireless clients for 2 minutes. The WLAN LED on the wireless router will be lit for 2 min ut es wh en t hi s w ire les s router is waiting for incoming WPS reques t s. Configure Enter ...

  • Intellinet Wireless 150N 3G 524940 - page 90

    83 Chapter II I Advanced Function s 3 - 1 Quality of Service (QoS) Quality of service pr ovides an ef ficient way for comput ers on the network to share the I nternet bandwidth with a p romised quality of I nternet service. Without QoS, all computers and devices on t he network w i ll c o m pe t e w i t h e a c h o t h e r t o g e t I nternet bandw ...

  • Intellinet Wireless 150N 3G 524940 - page 91

    84 Enable QoS (1): Check this box to enable the QoS funct ion ; de - select this box if you don ’ t want to enforce QoS bandwidth limitatio ns. Total Download You can set the limit of total downloa d Bandwidth (2): bandwidth in kbits. To disable the download bandwidth limitation, enter “0” here. Total Upload You can set th e limit of to tal u ...

  • Intellinet Wireless 150N 3G 524940 - page 92

    85 selected by clicking t his button. Move D o wn (1 0): You can l ower the prior ity of the QoS rule you selected by clicking t his button. After you fin ish the settings, click “ Apply ” (11) and the following message wi ll be displa yed on y our W eb brow ser: C lick “ Continue ” to go back and continue with the router setup procedure , ...

  • Intellinet Wireless 150N 3G 524940 - page 93

    86 Below are descri ptions of th e options : Rule Name (a): Enter a name for this QoS rule ( up to 15 alphanumerical characters) . Bandwidth (b): Set the bandwidth l imitation of t his QoS rule. You need to se le ct t he da ta d ir ec tio n o f th is ru le (Upload o r Dow nload), and the s peed of bandwidth limitation in k bps, then select the type ...

  • Intellinet Wireless 150N 3G 524940 - page 94

    87 Remote IP Specify the remote (dest ination) IP a ddress Address: (e): that will be affected by this ru le. I nput the starting IP address in the left fiel d and input the end IP address in the ri ght field to def ine a range of IP addresses, or just input the IP address in the left field to define a single IP address. Remote Port I nput the rang ...

  • Intellinet Wireless 150N 3G 524940 - page 95

    88 3 - 2 Network Address Trans lati on (NAT ) Network addres s translat ions solve the problem o f sharing a sin gle IP address on mu ltiple computer s. Without NAT, a ll computers must be assigned a val id Int ernet I P address to g et conn ected t o the Internet, but In ternet service p rov iders provide only a very few IP addresses to each user. ...

  • Intellinet Wireless 150N 3G 524940 - page 96

    89 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router reboot s. ) 3 - 2 - 2 Port Forwarding This function all ows you to redirect a single port or consecutive ports of an In ternet IP address to ...

  • Intellinet Wireless 150N 3G 524940 - page 97

    90 Below are descri ptions of th e options : Enable Port Check thi s box to e nable port mapping ; Forwarding (1): uncheck thi s box to disable port mapping. Private IP (2 ): Input th e IP address o f the computer o n the local network that provides I nternet service. Computer Name Pull down the menu and all the computers (3): connected to the rout ...

  • Intellinet Wireless 150N 3G 524940 - page 98

    91 Reset (12): Unselect all mappings. After you fin ish the settings, click “ Apply ” (13 ) and the following message wi ll be displa yed on y our W eb browser: C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seco ...

  • Intellinet Wireless 150N 3G 524940 - page 99

    92 Below are descri ptions of the options : Enable Virtual Check th is box to enable the virtual server; Server (1): uncheck this box to disable it . Private IP (2 ): In put the IP addr ess of the computer which provides Internet service. Compute r Name Pull down the menu and all the computers (3): connected to the router will be li sted here. You ...

  • Intellinet Wireless 150N 3G 524940 - page 100

    93 Reset (9): Remove all enter ed values. Virtual Server All existing virtual s erver mappings wil l be Table (10): displayed here. Delete (11) : S elect a virtual server mapping by clicking the “ Select ” box of the mapp ing, then click “ Delete Selected ” to remove the m apping. If there ’ s no existing mapping, this but ton will be gra ...

  • Intellinet Wireless 150N 3G 524940 - page 101

    94 3 - 2 - 4 Port Mapping for Spec ial Applications Some applications require more t han one connection a time; these applications won ’ t work with sim ple NAT rules. In order to make these applica tions work, you c an use this function . Below are descri ptions of th e options : Enable (1): Check this box to enabl e special applications ; unche ...

  • Intellinet Wireless 150N 3G 524940 - page 102

    95 Popula r This section lis ts the more popular applications Applications ( 7): tha t require multiple connections. Select an application from the “ Popular Applications ” section and click “ Add ” to sav e the setting to “ Current Trig ger - Port Table. ” Add (8): Add the setting to the “ Current T rigger - Port Table. ” Reset (9) ...

  • Intellinet Wireless 150N 3G 524940 - page 103

    96 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router reboot s. ) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 3 - 2 - 5 UPnP Setting ...

  • Intellinet Wireless 150N 3G 524940 - page 104

    97 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router reboot s. ) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 3 - 2 - 6 ALG Settings ...

  • Intellinet Wireless 150N 3G 524940 - page 105

    98 There are many applications listed here. C heck the box of the special support for appl ications you need, then click “ Apply .” T he following mes sage will be disp layed on your W eb browser: C lick “ Continue ” to go back and con tinue with the route r setup procedure , or click “ Apply ” to reboot the router so the se ttings will ...

  • Intellinet Wireless 150N 3G 524940 - page 106

    99 3 - 3 Firewall In addition to NA T, this router p rovide s firewall function s to bloc k malicio us intr uders f rom acce ssing yo ur comput ers on your local network. These functions i nclude inbound attack preventi on and block ing of outbound traffic, such as blocking URLs that have pre - defined keywords. C lick “ Firewall ” on the left ...

  • Intellinet Wireless 150N 3G 524940 - page 107

    100 3 - 3 - 1 Access Control This function all ows or denies computers wit h specific MAC addresses access to the network; it can also allow or deny computers with a specific IP address, protocol or port. C lick “ Firewal l” on the le ft side of the W eb management interface, then click “ Access Control .” T he following message will be dis ...

  • Intellinet Wireless 150N 3G 524940 - page 108

    101 “ aa:bb:cc:dd:ee:ff ,” just input “ aabb ccddeeff .” Computer Name Pull down the menu and all the computers (3): connected to the router will be li sted here. You can select t he computer name without checking the IP address of the compute r. Comment (4): You can input any text here as a commen t about this MAC ad dress, such as “ ROO ...

  • Intellinet Wireless 150N 3G 524940 - page 109

    102 the network; if y ou select “A llow, ” on ly IP addresses listed in th e f il ter in g t ab le wi ll b e a bl e to connect to th e network, and all other network devices will be rejected . IP Filtering All existing IP add resses in the fi lte rin g ta ble wi ll Table (12): be listed here. Add PC (13): Click to add a new I P address t o the ...

  • Intellinet Wireless 150N 3G 524940 - page 110

    103 3 - 3 - 1 - 1 Add PC After this button is cli cked, the following message wi ll be displayed on your W eb browser: Below are descri ptions of th e options : Client PC Enter any text to descr ibe this IP address . (Up Description (a): to 16 alpha numerical characters. ) Client PC IP I nput the starting IP address in t he left a b c d e f ...

  • Intellinet Wireless 150N 3G 524940 - page 111

    104 address (b): field and input th e end IP addres s in the right field to define a ra nge of IP addres ses, or just input the IP add ress in the left field to define a single IP add ress. Client PC C heck all the services you want to allow or Service (c): deny this IP address to use . Y ou can check multi ple s ervice s. Protocol (d): If the serv ...

  • Intellinet Wireless 150N 3G 524940 - page 112

    105 Below are descri ptions of th e options : Enable URL Check this b ox to enfor ce URL Blo cking ; Blocking (1): uncheck it to disable URL Blocking. URL/Keyword (2) : Input the U RL (host nam e or IP address of the W eb site , like http://www.blocked - site.com or http:/ /11.22.33.44 ), or the keyw ord that is contained in the URL (like por nogra ...

  • Intellinet Wireless 150N 3G 524940 - page 113

    106 Delete All (7): If you want to de lete all URL/Key word entries listed here, click “ Delete Al l .” Reset (8): You can also click “ Reset ” to unselect all URL/Keyword entries . After you fin is h the settings, click “ Apply ” ( 9 ) and the following message wi ll be displa yed on y our W eb browser: C lick “ Continue ” to go ba ...

  • Intellinet Wireless 150N 3G 524940 - page 114

    107 Below are descri ptions of th e opt ions : Ping of Death ( 1): Ping of Death is a spe cial packet, and it will cause certain computer s to stop respo nding. Check this box and the router wil l filte r this ki nd of packet out. Discard Ping Ping is a common and us eful tool for learning f ro m WAN (2 ): the connectio n status of a spec ified rem ...

  • Intellinet Wireless 150N 3G 524940 - page 115

    108 server become unusable. Check this box and the router will filter this kind of traffic ou t. Advanced Click this but ton and you can set adva nced Settings (5): setti ngs of the DoS preventi on method listed above ( see section 3 -3-3- 1 DoS – Adva nced Settings below ). After you fin ish the settings, click “ Apply ” ( 9 ) and the follow ...

  • Intellinet Wireless 150N 3G 524940 - page 116

    109 Below are descri ptions of th e options : Ping of Death ( a): Set the threshold for when this DoS preve ntion mechani sm wil l be acti vated. C heck the box of Ping of Death, and input the frequency of the threshold (ho w many pack ets per secon d, minute or h our) . Y ou can al so input the “ Burst ” value, which means when this number of ...

  • Intellinet Wireless 150N 3G 524940 - page 117

    110 C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings will take effect. (W ait for about 30 seconds while the router reboot s. ) If you want to re set all settings o n this page back to previously saved value s , click “ Cancel .” 3 - 3 - 4 Demilitarize ...

  • Intellinet Wireless 150N 3G 524940 - page 118

    111 Below are d escriptions of the options : Enable DMZ (1): Check this box to enabl e the DMZ function ; uncheck this box to disabl e the DMZ function. Pu blic IP Yo u can select “ Dynamic IP ” or “ Static I P ” here. address (2): If you select “ Dynamic IP ,” you need to sel ect an Internet connection sessi on from the drop - down men ...

  • Intellinet Wireless 150N 3G 524940 - page 119

    112 Reset (10): You can also click “ Reset ” to unselect all D MZ entries. After you fin ish the settings, click “ Apply ” ( 11 ) and the following message wi ll be displa yed on y our W eb browser: C lick “ Continue ” to go back and continue with the router setup procedure , or click “ Apply ” to reboot the router so the se ttings ...

  • Intellinet Wireless 150N 3G 524940 - page 120

    113 3 - 4 F ail Over WAN fai lure detect ion wo rks by detec ting the pr esence of t raffi c on the 3G modem link. If the link is idle for too long , th e router will attempt to ping a t arget IP address. If the ping does not reply, the router assumes the link is down and attem pts to fail over to an E thernet WA N link. Below are descri ptions of ...

  • Intellinet Wireless 150N 3G 524940 - page 121

    114 Ping Target IP ( 4 ): I npu t the target IP ad dress you want t o p in g o ut . If the major I nternet co nnecti on is idle for too long , the route r will attempt to pin g the target IP address. E- Mail If you enab le the E- Mail Not ifi catio n f uncti on, Notificat ion (5): when the WAN connection fails the router will automatically attempt ...

  • Intellinet Wireless 150N 3G 524940 - page 122

    115 3 - 5 Syst em Status The functions descri bed here will provide you with system - related information. To enter the S ystem S tatus m enu, either clic k the “ Status ” link in the upper - righ t corner of the W eb management interface or clic k “ Status ” in the main menu . 3 - 5 - 1 System I nformation and F irmware V ersion Click “ ...

  • Intellinet Wireless 150N 3G 524940 - page 123

    116 This information wil l vary depending on the c onnection status. 3 - 5 - 3 Device Status C lick “ Device Status ” on the l eft side of the W eb management interface, and the following mes sage will be displayed on your W eb browser: ...

  • Intellinet Wireless 150N 3G 524940 - page 124

    117 This information wil l vary depending on the devi ce status. 3 - 5 - 4 System Log All important system events are logged. You can use this func tion to check the e vent log of your ro uter. Cl ick “ System Log ” on t he left side of the W eb management interface, and the following message will be displayed on your W eb browser: Below are de ...

  • Intellinet Wireless 150N 3G 524940 - page 125

    118 Cl ick “ Security Log ” on the left side of the W eb management interface, and the following message will be displayed on your W eb browser: Below are descri ptions of th e options : Save (1): Save the current event log to a text file. Clear (2): Delete all event logs displ ayed here. Refresh (3): Refresh the event l og display. 3 - 5 - 6 A ...

  • Intellinet Wireless 150N 3G 524940 - page 126

    119 All informatio n about active DHCP leases issued b y this router will be displayed here. C lick “ Refresh ’ to display the latest inform ation . 3 - 5 - 7 Statistics You can use thi s function t o check the st atistics of the wirel ess, LAN and WAN interface s of this router. C lick “ Statistics ” on the left side of the W eb management ...

  • Intellinet Wireless 150N 3G 524940 - page 127

    120 3 - 6 Configurat ion Backup and Restore You can back up all config urations of this ro uter to a fi le so you can make seve ral cop ie s of the router configuration for security reason s. C lick “ Tool s” at the upp er - right corner of the W eb management interface, then c lick “ Configuratio n Tools ” on the left side of the W eb mana ...

  • Intellinet Wireless 150N 3G 524940 - page 128

    121 configuration wi l l be r e p la c e d b y t h e f il e y o u j u s t uploaded. Restore to Click to remove all s e ttings you made and Factory Default restore the configuration of this router back to (3): factory default settings. 3 - 7 Firmware Upgrade The system software used by th e ro u t e r i s referred t o a s “ firmware,” just like ...

  • Intellinet Wireless 150N 3G 524940 - page 129

    122 Click “ Browse ” first and you ’ ll be prompted to provide the filen ame of the firmware upg rade file. Do wnload the latest firmware fi le from www.intelli net - network.com and use it to upgrad e your router. After a fir mware upgrade fil e is selected, click “ Apply ” and the router will start the firmwa re upgrade pro ced ure auto ...

  • Intellinet Wireless 150N 3G 524940 - page 130

    123 C lick “ Apply ” to reset y our router. It will be av ailable again afte r a few minutes. ...

  • Intellinet Wireless 150N 3G 524940 - page 131

    124 Chapter IV: Appendix 4 - 1 Specifi cation s Standards • IEEE 802.1d (Spanning Tree Protocol) • IEEE 802.11b (11 Mbps Wireless LAN) • IEEE 802.11g (54 Mbps Wireless LAN) • IEEE 802.11n Draft 2.0 ( 15 0 Mbps Wireless LAN) • IEEE 802.11n Draft 2.0 (300 Mbps Wireless LAN) • IEEE 802.3 (10Base- T Ethernet) • IEEE 802.3u (100Base-TX Fas ...

  • Intellinet Wireless 150N 3G 524940 - page 132

    125 - UDP - ICMP - PPPoE - NTP - NAT - DHCP - DNS • NAT: - Virtual server - Port forwarding - Special applications (port trigger) • Firewall: - Access control based on MAC address - URL filter - DM Z (demilitarized zone) • Supports UPnP (Universal Plug and Play) • Supports DHCP (client/server) • Supports WPS (WiFi Protected Setup) • VPN ...

  • Intellinet Wireless 150N 3G 524940 - page 133

    126 - IEEE 802.11n (MCS0-07: up to 150 Mbps) - IEEE 802.11n (MCS0-15: up to 300 Mbps) • Output power: - OFDM: 15 dBm +/- 1 dBm (300 Mbps, 40 mW max.) - OFDM: 15 dBm +/- 1 dBm (54 Mbps, 4 0 mW max.) - CCK: 17 dBm +/- 1 dBm (11 Mbps, 63 mW max.) • Receiver sensitivity: - 11n ( 15 0 Mbps) MCS0- 07 : 20 MHz: -73 dBm; 40 MHz: -68 dBm - 11n (300 Mbps ...

  • Intellinet Wireless 150N 3G 524940 - page 134

    127 Power • External power adapter: 12 V DC, 1.0 A • Power consumption: 5 W max., Model 524681; 3.5 W max., Model 524940 Package Contents • Wireless 3G Router (150N or 300N) • User manual on CD, plus quick install guide • Power adapter • Ethernet Cat5 RJ45 cable: 1.0 m (3 ft.) • USB extension cable: 1.0 m (3 ft.) ...

  • Intellinet Wireless 150N 3G 524940 - page 135

    128 4 - 2 Troubleshoot ing If you f i nd the router is working improperly or has stop ped responding , see if a possible solution appears in this section b efore you contact your dealer of purchas e for help . Scenario Solution Router is not responding when I try to access it b y W eb browser . a. C heck the router’s power cord and network cable ...

  • Intellinet Wireless 150N 3G 524940 - page 136

    129 connected to the I nternet with your computer directly attached t o the device provided by your I n ternet service provider. d. Check the PPPoE / L2TP / PPTP user ID and passw ord again. e. Call your Internet s ervice provi de r and check if there ’ s something wrong with their service. f. If you just can ’ t conne ct to one or mor e W eb s ...

  • Intellinet Wireless 150N 3G 524940 - page 137

    130 d. If this never hap pen ed before, call y ou r Internet servic e provid er to see if there is something w rong with their n etwork. I can ’ t log on to the W eb management interface ; the password is wrong . a. Make sure you ’ re connecting to the correct IP address of t he router . b. The p assword is case - sensitive. Make sure the Caps ...

  • Intellinet Wireless 150N 3G 524940 - page 138

    131 4 - 3 Glossary Default Gateway (Router): Every non - router IP device needs to configure a default gat eway’s IP address. When the device sends out an IP packet, if the destination i s not on the same network, t he device has to send the packet to its default gateway, which will then send it out toward t he destination. DHCP: Dynamic Host Con ...

  • Intellinet Wireless 150N 3G 524940 - page 139

    132 computer host in an IP net work. Example: 192.168.2.1 . It consis ts of 2 portions: the IP network address, and the host identifier. The IP address is a 32 - bit binar y patter n, which can be represented as four cascaded decimal numbers separated by “.”: aaa.aaa.aaa.aaa, where each “aaa” can be anything from 000 to 255, or as four casc ...

  • Intellinet Wireless 150N 3G 524940 - page 140

    133 MAC Addres s: MAC st ands fo r Media Access Control. A MAC address is the hardware address of a device connected to a network. The MAC address is a unique identifier for a device with an Ethernet interface. It is comprised of t wo parts: 3 bytes of data that correspo nds to the Manu facturer ID (unique for each manufact urer), plus 3 bytes that ...

  • Intellinet Wireless 150N 3G 524940 - page 141

    134 transmitting info rmation over E thernet betwee n different manufact urers . Protocol: A pro tocol is a se t of rules f or interacti on agreed upon between multiple parties so that when they interf ace with each other based on such a protocol , the interpretati on of their behavior is well defined a nd can be ma de objectively, w ithout confusi ...

  • Intellinet Wireless 150N 3G 524940 - page 142

    135 ...

Manufacturer Intellinet Category Router

Documents that we receive from a manufacturer of a Intellinet Wireless 150N 3G 524940 can be divided into several groups. They are, among others:
- Intellinet technical drawings
- Wireless 150N 3G 524940 manuals
- Intellinet product data sheets
- information booklets
- or energy labels Intellinet Wireless 150N 3G 524940
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intellinet Wireless 150N 3G 524940.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intellinet Wireless 150N 3G 524940, service manual, brief instructions and user manuals Intellinet Wireless 150N 3G 524940. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intellinet Wireless 150N 3G 524940.

Similar manuals

A complete manual for the device Intellinet Wireless 150N 3G 524940, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intellinet Wireless 150N 3G 524940 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intellinet Wireless 150N 3G 524940.

A complete Intellinet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intellinet Wireless 150N 3G 524940 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intellinet Wireless 150N 3G 524940, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intellinet Wireless 150N 3G 524940, that we can find in the current document
3. Tips how to use the basic functions of the device Intellinet Wireless 150N 3G 524940 - which should help us in our first steps of using Intellinet Wireless 150N 3G 524940
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intellinet Wireless 150N 3G 524940
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intellinet Wireless 150N 3G 524940 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intellinet Wireless 150N 3G 524940?

Use the form below

If you did not solve your problem by using a manual Intellinet Wireless 150N 3G 524940, ask a question using the form below. If a user had a similar problem with Intellinet Wireless 150N 3G 524940 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)