English dropdown-ico

Manual Posiflex LS-1000U

22 pages Not applicable
Download

Go to site of 22

Summary
  • Posiflex LS-1000U - page 1

    FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply w ith limits for a Class A digital device pursuant to EN55022 and 47 CFR, Part 2 and subpart J of Part 15 ...

  • Posiflex LS-1000U - page 2

    FUNDAMENTAL INFORMA TION MODEL NAME : LS - 1000 CONTENT ( Besides this guide) : Fig . 1 Box content besides this g uide INSTALLATION GUIDES 1. Install the USB or RS232 interface cable onto the scanner by inserting the 8 pin RJ45 type modular plug ( Fig. 2 ) of the cable into the scanner until a firm click is heard. 2. Use the stand fixing screw to ...

  • Posiflex LS-1000U - page 3

    Description Function Scan Window Reads barcodes Object Detector Trigger and wake up scanner automatically when present ed with barcode in its range Beeper Hole Fo r beep tone indication USING THE SCANNER SCANNER INTRODUCTION Features The scanner unit is a compact and space - saving hands - free omni - directional laser scanner . It can operate in a ...

  • Posiflex LS-1000U - page 4

    Wake up scanner When the scanner enters the sleep mode, pressing this switch can wake the scanner up. The sleep mode feature can be programmed using the menu labels from the Programming Guide. NO TE: The default time - out value is set to 10 minutes after laser sl e p t , 30 minutes after motor slep t . When the scanner is in sleep mode, the LED in ...

  • Posiflex LS-1000U - page 5

    SCANNER SETUP (PROGRAMMING) In most of the cases no setup is required. The defaul t setup of the scanner makes the scanner able to detect automatically the most commonly applied bar code types as tabulated above and send the data to the host system as if they are read from an USB or RS232 keyboard . To read the disabled bar code types, t he program ...

  • Posiflex LS-1000U - page 6

    Cover unwanted codes with your hand and present the desired codes, one by one, to the scanner, the scanner beeps once as it accepts each code. When done, again present the < Enter/Exit programming mode > barcode. The scanner beeps twice, once long and once short, and the LED returns to blue. The scanner has b een programmed. Of course you may ...

  • Posiflex LS-1000U - page 7

    SCANNER OPERATION Operating the Scanner The scanner read s barcodes in omni - directional scan mode as regular practice. It can also operate in single - line mode for a better aiming on a specific barcode that is printed on a surface with more than one barcode printed closely. Single Line Scan Mode In this mode the scanner can emit a single line pa ...

  • Posiflex LS-1000U - page 8

    Sleep Mode After the scanner has been inactive for a period of time, the laser automatically turns off; then the motor will turn off and the scanner will enter the “ Sleep Mode ” , the blue status LED keeps blink ing as indication. To wake up the scanner, simply present an object close to the scan window, or press the function button. Note: The ...

  • Posiflex LS-1000U - page 9

    Beeper Indications A beeper gives audible feedback on scanner operation. Beeps Indication One bee p A barcode has been successfully decoded. Four beeps in series This indicates the scanner passed the power on self - test and is operating properly. Two beeps: low - high The scanner has entered programming mode. Two beeps: same tone Scanner has retur ...

  • Posiflex LS-1000U - page 10

    Page 10 make sure that the scanner is installed as instructed in this manual and that all cables are properly connected. If the problem remains, contact your dealer. Problem Diagnostic Tips The scanner window is dirty. Clean the scanner window as described in the Maintenance section. The presented barcode type is not enabled. Use the Programming Gu ...

  • Posiflex LS-1000U - page 11

    The software running on the POS system does not support the data format of the barcode label. Enter/Exit Programming Mode Note: Scan t h is code to enter and exit programming mode. A slightly enlarged image of this code is also printed on the last page of this section for ease of application . PROGRAMMING CODES All framed barcode names represent as ...

  • Posiflex LS-1000U - page 12

    RESET Note: The reading of the “RESET” label turns all the parameters back to default values but leaving the interface mode unchanged. It is suggested to scan also the “ Return to USB default ” or “ Return to RS232 default ” label after this for LS - 1000 scanners. Return to USB default US Keyboard Return to RS232 default Page 12 ...

  • Posiflex LS-1000U - page 13

    Message Terminator - Enter Message Terminator - H.tab Message terminator - None International Keyboard (ALT method) Page 13 ...

  • Posiflex LS-1000U - page 14

    Return to customer default Note: The reading of the label will recover all parameter back to customer default . Codabar Enable Save as customer default Codabar Disable Page 14 ...

  • Posiflex LS-1000U - page 15

    Full ASCII COD E 39 Disable Code 39 Enable Code 39 Disable Full ASCII CODE39 Enable Page 15 ...

  • Posiflex LS-1000U - page 16

    UPC/EAN/JAN Disable UPC/EAN/JAN Enable ITF 2 OF 5 Disable ITF 2 of 5 Enable Page 16 ...

  • Posiflex LS-1000U - page 17

    UPC/EAN ADD ON OFF ADD ON 5 only ADD ON 2 only ADD ON 2 or 5 Page 17 ...

  • Posiflex LS-1000U - page 18

    EAN/UPC +Add on (none mandatory) Force UPC - A to EAN - 13 format enable EAN/UPC + Add on (mandatory) Force UPC - A to EAN - 13 format disable Page 18 ...

  • Posiflex LS-1000U - page 19

    EAN - 13 Convert to ISBN/ISSN Enable EAN - 13 Convert to ISBN/ISSN Disable EAN - 128 Enable EAN - 128 Disable Page 19 ...

  • Posiflex LS-1000U - page 20

    Code 128 Enable Code 128 Disable Code 93 Enable Code 93 Disable Page 20 ...

  • Posiflex LS-1000U - page 21

    Chinese Post Code Enable Chinese Pos t Code Disable Code 32 (Italian Pharmacy Code) Enable Code 32 (Italian Pharmacy Code) Disable Page 21 ...

  • Posiflex LS-1000U - page 22

    MSI enable MSI Disable Enter/Exit Programming Mode Page 22 ...

Manufacturer Posiflex Category Barcode readers

Documents that we receive from a manufacturer of a Posiflex LS-1000U can be divided into several groups. They are, among others:
- Posiflex technical drawings
- LS-1000U manuals
- Posiflex product data sheets
- information booklets
- or energy labels Posiflex LS-1000U
All of them are important, but the most important information from the point of view of use of the device are in the user manual Posiflex LS-1000U.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Posiflex LS-1000U, service manual, brief instructions and user manuals Posiflex LS-1000U. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Posiflex LS-1000U.

Similar manuals

A complete manual for the device Posiflex LS-1000U, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Posiflex LS-1000U by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Posiflex LS-1000U.

A complete Posiflex manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Posiflex LS-1000U - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Posiflex LS-1000U, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Posiflex LS-1000U, that we can find in the current document
3. Tips how to use the basic functions of the device Posiflex LS-1000U - which should help us in our first steps of using Posiflex LS-1000U
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Posiflex LS-1000U
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Posiflex LS-1000U in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Posiflex LS-1000U?

Use the form below

If you did not solve your problem by using a manual Posiflex LS-1000U, ask a question using the form below. If a user had a similar problem with Posiflex LS-1000U it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)