English dropdown-ico

Manual Konica Minolta BIZHUB 600

394 pages 7.62 mb
Download

Go to site of 394

Summary
  • Konica Minolta BIZHUB 600 - page 1

    U ser ’ s Guide [Network Scanner Operations] ...

  • Konica Minolta BIZHUB 600 - page 2

    Introduction bizhub 750/600 x-1 Introduction Thank you for choosing this machine. This user’s guide contains details on the operation of the network connection and scanner functions of the bizhub 750 /600, precautions on its use, and ba- sic troubleshooting procedures. In order to ensure that this machine is used correctly and eff iciently, caref ...

  • Konica Minolta BIZHUB 600 - page 3

    Introduction x-2 bizhub 750/600 Trademarks and Regi stered Trademarks KONICA MINOLTA, KONICA MINOLTA L ogo, and The essentials of imaging are registered trademarks or tradem arks of KONICA MINOLTA HOLDINGS, INC. PageScope and bizhub are registered tr ade marks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Netscape Communications, the ...

  • Konica Minolta BIZHUB 600 - page 4

    Introduction bizhub 750/600 x-3 4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derive d from this software without prior written permission. For writt en pe rmission, please contact openssl- core@openssl.org. 5. Products derived from this softwa re may not be called “OpenSSL” nor may ...

  • Konica Minolta BIZHUB 600 - page 5

    Introduction x-4 bizhub 750/600 Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: 1. Redistributions of source code must retain the copyrigh t notice, this list of conditions and the followin g disclaimer. 2. Redistributions in binary form must reproduc ...

  • Konica Minolta BIZHUB 600 - page 6

    Introduction bizhub 750/600 x-5 Permission to use, copy, modify and di stribute this soft ware and its do cu- mentation for any purpose and without fe e is hereby granted, provided that the above copyright notice appears in al l copies and that both that copyright notice and this permission notice app e ar in supporting documentation, and that the ...

  • Konica Minolta BIZHUB 600 - page 7

    Introduction x-6 bizhub 750/600 Portions of this code are copyrigh t © 2001-2003, Cambridg e Broadband Ltd. All rights reserved. Redistribution and use in source and bi nary forms, with or without modifica- tion, are permitted provided that the follow ing conditions are met: * Redistributions of source code must retain the above copyright notice , ...

  • Konica Minolta BIZHUB 600 - page 8

    Introduction bizhub 750/600 x-7 CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- CLAIMED. IN NO EVENT SHA LL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR AN Y DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMEN T OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ...

  • Konica Minolta BIZHUB 600 - page 9

    Introduction x-8 bizhub 750/600 * Redistributions in binary form must reproduce the above copyr ight notice, this list of conditions and the followi ng disclaimer in the documentation and/ or other materials provid e d with the distribution. * Neither the name of Cisco, Inc, Beij ing University of Posts and Telecommu- nications, n or the name s of ...

  • Konica Minolta BIZHUB 600 - page 10

    Introduction bizhub 750/600 x-9 Contents Introduction Trademarks and Regi stered Trademarks ........... ........... ........... ..... x-2 Contents ...... ........ ............ ........ ........... ......... ........... ........ ......... .......... x-9 About Th is Manual ....... ........... ........ ............ ........ ........... ......... ..... ...

  • Konica Minolta BIZHUB 600 - page 11

    Introduction x-10 bizhub 750/600 2.3 Sending Data in an E-Mail Message (Scan t o E-Mail) .......... ..........2-6 Scan to E-Ma il ........ ......... ........... ........ ............ ........ ........... ......... .... 2-6 Using Programs ......... ......... ........... ........ ........... ............ ........ ..........2-6 Selecting Group Address ...

  • Konica Minolta BIZHUB 600 - page 12

    Introduction bizhub 750/600 x-11 Full Scan (Application) ... ............ ........... ........ ........... ............ ........ 2-64 Frame Erase (Application) ....... ........... ........... ......... ........... ........... 2-65 Center Erase (Application) ......... ........... ........... ........ ............ ........ 2-66 Non-Image Area Erase ( ...

  • Konica Minolta BIZHUB 600 - page 13

    Introduction x-12 bizhub 750/600 Program Defa ult .... ........... ........... ........ ............ ........ ........... ......... .. 3-32 Address Book Default Index .......... ........... ........ ............ ........... .....3-33 Address Type Symbol Display .... ........... ........... ............ ........ ........3-34 3.8 Setting the Save For ...

  • Konica Minolta BIZHUB 600 - page 14

    Introduction bizhub 750/600 x-13 3.18 Enabling L DAP Settings ...... ........... ......... ........... ........ ............ ........ 3-75 Enabling LDAP Param eters ..... ........... ........... ........... ......... ........... 3-75 To specify Enabling LDAP settings ............... ........... ............ ........ 3-75 3.19 Setting Up LDAP Settin ...

  • Konica Minolta BIZHUB 600 - page 15

    Introduction x-14 bizhub 750/600 3.29 LPD Settings ............ ........... ........ ........... ......... ........... ........ ............3-116 To specify LPD settings ........ ............ ........... ........... ........ ............3-116 3.30 Prefix/Suffix Setti ngs ... ........... ............ ........ ........... ......... ........... ...3-1 ...

  • Konica Minolta BIZHUB 600 - page 16

    Introduction bizhub 750/600 x-15 For Internet Explorer ......... ......... ........... ........ ........... ......... ........... .. 4-9 For Netscape Navigator ............... ............ ........ ........... ........... ........ 4-9 4.3 Logging O n and Logg ing Off ......... ............ ........ ........... ......... ........ 4-10 Logging Off .. ...

  • Konica Minolta BIZHUB 600 - page 17

    Introduction x-16 bizhub 750/600 To check or c hange the registere d user information ............ ........4-49 To delete a registered user ......... ........... ......... ........... ........... ........4-51 Default Function Permiss ion ............... ............ ........... ........... ........4-52 To specify the defa ult function permi ssion s ...

  • Konica Minolta BIZHUB 600 - page 18

    Introduction bizhub 750/600 x-17 E-Mail TX (SMT P) ................. ........ ............ ........... ........ ........... ...... 4-86 4.30 SSL/TLS ....... ........ ............ ........ ........... ......... ........... ........ ........... ...... 4-89 SSL/TLS Setting ................... ........... ......... ........... ........... ........ .... ...

  • Konica Minolta BIZHUB 600 - page 19

    Introduction x-18 bizhub 750/600 About This Manual This User’s Guide covers the bizhub 750/600 n etwork and scanning func- tions. This section introduces the st ructure of the manual and notat ions used for product names, etc. This manual is intended for users who understan d the basic operations of computers and the machine. For oper ating proce ...

  • Konica Minolta BIZHUB 600 - page 20

    Introduction bizhub 750/600 x-19 Explanation of Manual Conventions Ba si c Co py Oper ati on s Chap ter 3 Basic Copy Operati ons 3 bizhub 750/600 3-31 3.6 Selecting a Paper Setting The paper size can be sel ected automaticall y according to the document size or it can be sp ecified manually. Specify the paper si ze according to t he corresponding p ...

  • Konica Minolta BIZHUB 600 - page 21

    Introduction x-20 bizhub 750/600 User’s Guides The following User’s Guides have been prepared for this machine. User’s Guide [Copy Operations] This manual contain s details on basic operations and the operatin g proce- dures for the various copy functions. - Refer to this User’s Guide for details on operating procedures for cop y functions, ...

  • Konica Minolta BIZHUB 600 - page 22

    Introduction bizhub 750/600 x-21 IC-202 User’s Guid e/Quick Guide This manual contains det ails on oper ati ng procedures using the optional Im- age Controller (IC-202). - Refer to the User’s Guide (PDF data) provided in the User Software CD- ROM or Quick Guide (printed matter) attached to IC- 202 for the proce- dures to use the printer functio ...

  • Konica Minolta BIZHUB 600 - page 23

    Introduction x-22 bizhub 750/600 ...

  • Konica Minolta BIZHUB 600 - page 24

    1 Before Using the Scan Funct ions Chapter 1 Before Using the Scan Functions ...

  • Konica Minolta BIZHUB 600 - page 25

    1 Before Using the Scan Functions 1-2 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 1 Before Using the Scan Functions 1.1 Environment Required fo r Using the Scan Functions The following conditions a re required to use the network and sca nning func- tions of this machine. - The machine is connect ed to the network. (required) The func ...

  • Konica Minolta BIZHUB 600 - page 26

    Before Using the Scan Functions 1 bizhub 750/600 1-3 Before Using the Scan Funct ions Chapter 1 1.2 Available Scanning Functions “Scanning” refers to the operation of reading the image of a documen t fed through the ADF or placed on the original glass. The scann ing functions can be used to temporarily store the sc anne d data in the internal m ...

  • Konica Minolta BIZHUB 600 - page 27

    1 Before Using the Scan Functions 1-4 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 Sending the Scanned Data as Files (FTP) The scanned data is uploaded to a specified FTP server. The FTP server ad- dress, login password, and other info rmation a re entered from the touch panel of this machine. The data files uploaded to the FTP server ...

  • Konica Minolta BIZHUB 600 - page 28

    Before Using the Scan Functions 1 bizhub 750/600 1-5 Before Using the Scan Funct ions Chapter 1 Sending the Scanned Data to a Compu ter on the Network (SMB) The scanned data can be sent to a shared folder on a specified comput er. The name of the destinat ion computer, login password, and other informa- tion are entered from the to uch panel of thi ...

  • Konica Minolta BIZHUB 600 - page 29

    1 Before Using the Scan Functions 1-6 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 Saving the Scanned Data in Boxes The scanned data can be saved in boxe s created on the machine’s interna l hard disk. The data ca n be used in other applications. The fi le name can be entered from the touch panel of the machin e. In addition, if the ...

  • Konica Minolta BIZHUB 600 - page 30

    Before Using the Scan Functions 1 bizhub 750/600 1-7 Before Using the Scan Funct ions Chapter 1 1.3 Settings for Using Ne twork/Scannin g Functions It is recommended that the settings described below be specified before us- ing the network/scanning functi ons. The network settings described in “Specifying Network Setting s” must be specified fi ...

  • Konica Minolta BIZHUB 600 - page 31

    1 Before Using the Scan Functions 1-8 bizhub 75 0/600 Before Using the Scan Funct ions Chapter 1 ! Detail For details on registering destinations and specifying setti ngs, refer to the sections listed below. “Registering Abbreviated Destinati ons” on page 3-10 “Registering Group Destinations” on page 3-22 Setting the From Address To perform ...

  • Konica Minolta BIZHUB 600 - page 32

    Before Using the Scan Functions 1 bizhub 750/600 1-9 Before Using the Scan Funct ions Chapter 1 ! Detail For details on the scan settings, refer to “Specifying the Scan Settings” on page 2-43. Specifying Program Settings The destination a nd scan se ttings can be registered together as a single pro- gram. This is convenient for frequent ly scan ...

  • Konica Minolta BIZHUB 600 - page 33

    1 Before Using the Scan Functions 1-10 bizhub 750/600 Before Using the Scan Funct ions Chapter 1 1.4 Connecting to the Network The machine can be connecte d to the network. 2 Reminder The machine can be conne cted via a pa rallel or USB c onnection (option- al). However, be sure to connect to the network to use the scanner func- tion. Network Conne ...

  • Konica Minolta BIZHUB 600 - page 34

    Before Using the Scan Functions 1 bizhub 750/600 1-11 Before Using the Scan Funct ions Chapter 1 1.5 Flow Chart of Setup and Scanning Operations The sequence from the setup operat ions required to use the scanning fun c- tions to the scanning operation is shown below. Specify scan settings in the screen that appe ars after pressing the [Utility/Cou ...

  • Konica Minolta BIZHUB 600 - page 35

    1 Before Using the Scan Functions 1-12 bizhub 750/600 Before Using the Scan Funct ions Chapter 1 2 Note Some settings that can be specifie d on the control panel can also be specified from a computer over a network using PageScope Web Con- nection. For details, refer to Chapter 4, “Specifying Settings Using Page- Scope Web Connection”. The docu ...

  • Konica Minolta BIZHUB 600 - page 36

    2 Scanning Docu ments Chapter 2 Scanning Documents ...

  • Konica Minolta BIZHUB 600 - page 37

    2 Scanning Do cuments 2-2 bizhub 75 0/600 Scanning Docu ments Chapter 2 2 Scanning Documents 2.1 Control Panel No. Part Na me Descri ption 1 [Power Save] key Press to enter Power Save mode. While the machine is in Power Save mode, the indicator on the [Powe r Save] key lights up in green an d the touch panel goes of f. To cance l Power Save mode, p ...

  • Konica Minolta BIZHUB 600 - page 38

    Scanning Documents 2 bizhub 750/600 2-3 Scanning Docu ments Chapter 2 7 [Copy] key Press to enter Copy mode. (As a defau lt, the machine is in Copy mode.) While the machine is in Copy mode, the indicator on the [Copy] key lights up in green. For deta ils, refer t o the Us er’s Guide [Co py Opera - tions]. 8 [Reset] key Press to clear all settings ...

  • Konica Minolta BIZHUB 600 - page 39

    2 Scanning Do cuments 2-4 bizhub 75 0/600 Scanning Docu ments Chapter 2 7 CAUTION To prevent damage to the touch pa nel, do not push down on the touch panel with force. % Also, do not push down on the touc h panel using hard or sharp objects. ...

  • Konica Minolta BIZHUB 600 - page 40

    Scanning Documents 2 bizhub 750/600 2-5 Scanning Docu ments Chapter 2 2.2 Displaying the Scan Screen Display the Scan mode sc reen in or der to perform scanning operations. Turn the machine on. Wh en the machine i s ready to make copies, the Basic screen appears. Press the [Scan] ke y in the con trol pa nel to display the Scan mode screen. The disp ...

  • Konica Minolta BIZHUB 600 - page 41

    2 Scanning Do cuments 2-6 bizhub 75 0/600 Scanning Docu ments Chapter 2 2.3 Sending Data in an E-Ma il Message (Scan to E-Mail) Scan to E-Mail The Scan to E-mail operation is used to se nd images scanned on this ma- chine to a n e-mail address as an attach ment. The methods described below are availa ble for specifying the destination. The methods ...

  • Konica Minolta BIZHUB 600 - page 42

    Scanning Documents 2 bizhub 750/600 2-7 Scanning Docu ments Chapter 2 2 Touch [Program]. The selected destination s are listed under “Broadcast Destinations”. Other destination add resses can be added using the address book or through direct input. Only the destinat ions that can be spe cified are displayed. For example , fax destinations are n ...

  • Konica Minolta BIZHUB 600 - page 43

    2 Scanning Do cuments 2-8 bizhub 75 0/600 Scanning Docu ments Chapter 2 5 Load the document into the ADF or po sition it on the original glass of the machine. 6 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned jobs disappear from the job list. ...

  • Konica Minolta BIZHUB 600 - page 44

    Scanning Documents 2 bizhub 750/600 2-9 Scanning Docu ments Chapter 2 Selecting Group Addresses “Group” refers to multiple destin ations that are registe red collectively. The following procedure describes how to se nd data by selecting a group that has been r egistered in a dvance. For details on registering groups, re fer to “Registering Pr ...

  • Konica Minolta BIZHUB 600 - page 45

    2 Scanning Do cuments 2-10 bizhub 750/600 Scanning Docu ments Chapter 2 3 Select the desired destinat ions, and then touch [OK]. 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the docum ...

  • Konica Minolta BIZHUB 600 - page 46

    Scanning Documents 2 bizhub 750/600 2-11 Scanning Docu ments Chapter 2 2 Note Do not turn off the machine until the scanned jobs disappear fr om the job list. ...

  • Konica Minolta BIZHUB 600 - page 47

    2 Scanning Do cuments 2-12 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to send data by selecting destinations from the ad dress book. Multiple addres ses can be s ...

  • Konica Minolta BIZHUB 600 - page 48

    Scanning Documents 2 bizhub 750/600 2-13 Scanning Docu ments Chapter 2 % Administrator settings such as th e LDAP sever setting are required. For details, refer to “Enablin g LDAP Settings” on page 3-75. 3 Touch the button for a destination to se lect it. The selected bu ttons are highlighted, an d the selected destinations are listed unde r ? ...

  • Konica Minolta BIZHUB 600 - page 49

    2 Scanning Do cuments 2-14 bizhub 750/600 Scanning Docu ments Chapter 2 ! Detail To perform LD AP searches, th e LDAP serve r settings that are specified in Administrator Setting are required. For details, refer to “Enabling LDAP Settings” on page 3-75. Up to five destinations can be comb ined from the results of an LDAP search and from those e ...

  • Konica Minolta BIZHUB 600 - page 50

    Scanning Documents 2 bizhub 750/600 2-15 Scanning Docu ments Chapter 2 To search the destination 1 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 2 After specifying the settings, touch [OK]. 3 Load the document into the ADF or po sition ...

  • Konica Minolta BIZHUB 600 - page 51

    2 Scanning Do cuments 2-16 bizhub 750/600 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” refers to the operation of directly entering the d estination ad- dress from the ma chine’s control pan el. Up to five destinations can be combi ned from those entered directly and from the results of a n LDAP search . 1 Pres ...

  • Konica Minolta BIZHUB 600 - page 52

    Scanning Documents 2 bizhub 750/600 2-17 Scanning Docu ments Chapter 2 3 Enter the destination addre ss, and then touch [OK]. – To specify an additi onal address, touch [N ext Dest.], and then specify the address. – Frequently entered user names and domain names can be regis- tered to be recalled and used ag ain. First, prefixes and suffixes mu ...

  • Konica Minolta BIZHUB 600 - page 53

    2 Scanning Do cuments 2-18 bizhub 750/600 Scanning Docu ments Chapter 2 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of the machine. 7 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned ...

  • Konica Minolta BIZHUB 600 - page 54

    Scanning Documents 2 bizhub 750/600 2-19 Scanning Docu ments Chapter 2 2.4 Sending Data to a Server (Sc an to FTP) Scan to FTP The Scan to FTP operation can be used in a network en vironment with an FTP server. The scanne d data is sent to a specified folder in an FTP server on the network. This function is suitable for sending da ta of a large siz ...

  • Konica Minolta BIZHUB 600 - page 55

    2 Scanning Do cuments 2-20 bizhub 750/600 Scanning Docu ments Chapter 2 1 Press the [Scan] ke y on the cont rol panel. The Scan mode screen appears. 2 Touch [Program]. The selected destina tions are listed unde r “Broadcast Destinations”. Other destination addresses can be added using the address book or through direct input. Only the destinati ...

  • Konica Minolta BIZHUB 600 - page 56

    Scanning Documents 2 bizhub 750/600 2-21 Scanning Docu ments Chapter 2 – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 4 After specifying the settings, touch [OK]. 5 Load the document into the ADF or po sition it on the original glass of the machine. 6 Press the [Start] key on the control panel. Th ...

  • Konica Minolta BIZHUB 600 - page 57

    2 Scanning Do cuments 2-22 bizhub 750/600 Scanning Docu ments Chapter 2 1 Press the [Scan] ke y on the cont rol panel. The Scan mode screen appears. 2 Touch [Group]. Touching the button for a group disp lays the list of members registered in the group. Other destination addresses can b e added using the ad- dress b ook or through di rect in put. 3 ...

  • Konica Minolta BIZHUB 600 - page 58

    Scanning Documents 2 bizhub 750/600 2-23 Scanning Docu ments Chapter 2 4 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass ...

  • Konica Minolta BIZHUB 600 - page 59

    2 Scanning Do cuments 2-24 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to send data by selecting destinations from the ad dress book. Multiple addres ses can be s ...

  • Konica Minolta BIZHUB 600 - page 60

    Scanning Documents 2 bizhub 750/600 2-25 Scanning Docu ments Chapter 2 2 Touch [Address Book]. The address book is displayed, an d registered address names are dis- played by touching the corresponding index button. ? How can the address book b e searched f or the desir ed address? % Touch [Detail Search] to search for addresses. The address b ook ...

  • Konica Minolta BIZHUB 600 - page 61

    2 Scanning Do cuments 2-26 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of ...

  • Konica Minolta BIZHUB 600 - page 62

    Scanning Documents 2 bizhub 750/600 2-27 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” re fers to th e operation of directly inputting th e destination ad- dress from the mach ine ’s control pa nel. Up to five destinations can be specified through direct input. The following procedure describes ho w to directly ...

  • Konica Minolta BIZHUB 600 - page 63

    2 Scanning Do cuments 2-28 bizhub 750/600 Scanning Docu ments Chapter 2 3 Enter the host name, destination folder, user name, and password. – Host Name: Use the keyboard that appears in the touch panel to specify the destination host na me or IP address, and then touch [OK]. – Destination Folder: Use the keyb oard that appears in the touch pane ...

  • Konica Minolta BIZHUB 600 - page 64

    Scanning Documents 2 bizhub 750/600 2-29 Scanning Docu ments Chapter 2 6 Enter the destination Informa tion, and th en touc h [OK]. – To specify an additi onal address, touch [N ext Dest.], and then specify the address. The addresse s that were entered are li sted under “Broadcast Destin a- tions”. 7 Touch [Scan Set tings], and then specify t ...

  • Konica Minolta BIZHUB 600 - page 65

    2 Scanning Do cuments 2-30 bizhub 750/600 Scanning Docu ments Chapter 2 8 After specifying the settings, touch [OK]. 9 Load the document into the ADF or po sition it on the original glass of the machine. 10 Press the [Start] key on the control panel. The document is scanned, and the data is sent. 2 Note Do not turn off the machine until the scanned ...

  • Konica Minolta BIZHUB 600 - page 66

    Scanning Documents 2 bizhub 750/600 2-31 Scanning Docu ments Chapter 2 2.5 Sending Data to a PC on the Network (Scan to SMB) Scan to SMB The Scan to SMB operation ca n be used to directly send the scanned data to a specific computer on the network. To use the Scan to File (SMB) fun ction, specify t he Windows shared file set- ting on the computer t ...

  • Konica Minolta BIZHUB 600 - page 67

    2 Scanning Do cuments 2-32 bizhub 750/600 Scanning Docu ments Chapter 2 Settings on this machine - From [Administrator Setting] — [Network Setting] — [SMB Setting], spec- ify “v1/v2” or “v1” for the NTLM setting. Using Programs “Program” refers to a set of destinatio n computers and scan settings that are registered together. The fo ...

  • Konica Minolta BIZHUB 600 - page 68

    Scanning Documents 2 bizhub 750/600 2-33 Scanning Docu ments Chapter 2 3 Touch [Scan Set tings] to check the specified scan set tings. The spec- ified settings can al so be changed. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 4 After checking the se ttings, touch [OK]. 5 Load the document into ...

  • Konica Minolta BIZHUB 600 - page 69

    2 Scanning Do cuments 2-34 bizhub 750/600 Scanning Docu ments Chapter 2 Selecting Group Addresses “Group” refers to multiple destin ations that are re gistered collectively. The following procedure describes how to se nd data by selecting a group that has been registered in advan ce. For details on registering groups, refe r to “Registering G ...

  • Konica Minolta BIZHUB 600 - page 70

    Scanning Documents 2 bizhub 750/600 2-35 Scanning Docu ments Chapter 2 3 Select the desired destin ations, and then touch [OK]. 4 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the doc ...

  • Konica Minolta BIZHUB 600 - page 71

    2 Scanning Do cuments 2-36 bizhub 750/600 Scanning Docu ments Chapter 2 2 Note Do not turn off the machine until the scanned jobs disappear from the job list. Selecting Destinatio ns From the Address Book “Address book” refers to the collecti on of destination addresses that were registered in advance. The following procedure describes how to s ...

  • Konica Minolta BIZHUB 600 - page 72

    Scanning Documents 2 bizhub 750/600 2-37 Scanning Docu ments Chapter 2 2 Touch [Address Book]. The address book is displayed, an d registered address names are dis- played by touching the corresponding index button. ? How can the address book b e searched f or the desir ed address? % Touch [Detail Search] to search for addresses. The address b ook ...

  • Konica Minolta BIZHUB 600 - page 73

    2 Scanning Do cuments 2-38 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Scan Settings], and then specif y the scan settings. – For details on the scan settings, refer to “Specifying the Scan Set- tings” on page 2-43. 5 After specifying the settings, touch [OK]. 6 Load the document into the ADF or po sition it on the original glass of ...

  • Konica Minolta BIZHUB 600 - page 74

    Scanning Documents 2 bizhub 750/600 2-39 Scanning Docu ments Chapter 2 Entering the Addresses Directly “Direct input” re fers to th e operation of directly inputting th e destination ad- dress from the mach ine ’s control pa nel. Up to five destinations can be specified through direct input. 1 Press the [Scan] ke y on the cont rol panel. The ...

  • Konica Minolta BIZHUB 600 - page 75

    2 Scanning Do cuments 2-40 bizhub 750/600 Scanning Docu ments Chapter 2 3 Enter the destination information. – Host Name: Specify the destination host name (ent er using capital letters) or the IP address. Type in the destination name using the keyboard, and then touch [OK]. – Destination Folder: Enter the path to the destination folder using c ...

  • Konica Minolta BIZHUB 600 - page 76

    Scanning Documents 2 bizhub 750/600 2-41 Scanning Docu ments Chapter 2 5 Touch [Scan Set tings], and then specify th e scan settin gs. – For details on the scan settings, ref er to “Specifying the Scan Set- tings” on page 2-43. 6 After specifying the settings, touch [OK]. 7 Load the document into the ADF or po sition it on the original glass ...

  • Konica Minolta BIZHUB 600 - page 77

    2 Scanning Do cuments 2-42 bizhub 750/600 Scanning Docu ments Chapter 2 ! Detail The destination folder can also be specified by touching [Reference], the n browsing to a computer on the network. When a work group and computer th at exceed the nu mbers d escribed below exist, browsing over the networ k (subnet) of th is machine may not be performed ...

  • Konica Minolta BIZHUB 600 - page 78

    Scanning Documents 2 bizhub 750/600 2-43 Scanning Docu ments Chapter 2 2.6 Specifying the Scan Settings Available Settings Detailed scan settings can be specified by touch ing [Scan Settings] in the Scan mode screen. ...

  • Konica Minolta BIZHUB 600 - page 79

    2 Scanning Do cuments 2-44 bizhub 750/600 Scanning Docu ments Chapter 2 The settings that can be specifi ed are as follows: Item Description Reference File Type Selects the file type for s aving the scanned data. “File Type” on page 2-45 Resolution Sel ects the scan resolution. “Resolution” on page 2-47 Simplex/ Duplex Sel ects whe ther to ...

  • Konica Minolta BIZHUB 600 - page 80

    Scanning Documents 2 bizhub 750/600 2-45 Scanning Docu ments Chapter 2 File Type Select the file type for saving th e scanned data. The following two file type s are available. The encryption level can be sele cted if “File Type” is set to “PDF”. File type Also, grouping of the save d data can be specified. Scan Setting To specify the File ...

  • Konica Minolta BIZHUB 600 - page 81

    2 Scanning Do cuments 2-46 bizhub 750/600 Scanning Docu ments Chapter 2 3 Select the file type . 4 Select the scan settin g. 5 If “PDF” was sele cted, the enc ryption settings ca n be specified. If nec- essary, touch [Encrypt]. 6 Specify the encryption settings. – Encryption Level1: Select the encryption level. – Password: Enter the passwor ...

  • Konica Minolta BIZHUB 600 - page 82

    Scanning Documents 2 bizhub 750/600 2-47 Scanning Docu ments Chapter 2 7 Touch [OK], and then touch [OK] in the next scre en that app ears. Resolution Set the scanning resolution to 200 dpi, 300 dpi, 400 dpi, or 600 dpi. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Resolution]. 3 Select the resolut ion. 4 Touch [OK], and then touch [OK ...

  • Konica Minolta BIZHUB 600 - page 83

    2 Scanning Do cuments 2-48 bizhub 750/600 Scanning Docu ments Chapter 2 Simplex/Duplex Select whether to scan one side of the document or both sides. To specify the Simplex/Duplex setting 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Simplex/Duplex]. 3 Select the scan type. 4 Touch [OK], and then touch [OK] in the next screen that appea ...

  • Konica Minolta BIZHUB 600 - page 84

    Scanning Documents 2 bizhub 750/600 2-49 Scanning Docu ments Chapter 2 Original Ty pe Select the type according to the document. The following four image types are available. To specify the Original Type sett ing 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Original Type]. 3 Select the image type. 4 Touch [OK], and then touch [OK] in t ...

  • Konica Minolta BIZHUB 600 - page 85

    2 Scanning Do cuments 2-50 bizhub 750/600 Scanning Docu ments Chapter 2 Scan Size Set the paper size to be scanned. The available scan sizes are as follows: ! Detail If the documen t is read us ing the ADF, th e scan size wil l be fixed to “Au- to”. To specify the Scan Size setting 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Scan ...

  • Konica Minolta BIZHUB 600 - page 86

    Scanning Documents 2 bizhub 750/600 2-51 Scanning Docu ments Chapter 2 – Touch [Custom Size] to display a screen for specifying the size. Use the keyp ad or touch [-] an d [+] to specify the size. Touch [ ⇔ ] to switch between the integer and the fraction. The integer can be specified in in crements of 1 inch, and t he fraction can be specified ...

  • Konica Minolta BIZHUB 600 - page 87

    2 Scanning Do cuments 2-52 bizhub 750/600 Scanning Docu ments Chapter 2 To enlarge/reduce the scan to a preset zoom ratio (Zoom setting) The scan can be enlarged or reduced to a preset zoom ratio, such as one of the standard sizes. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Zoom]. 3 Select the zoom ratio. – Touch the zoom ratio but ...

  • Konica Minolta BIZHUB 600 - page 88

    Scanning Documents 2 bizhub 750/600 2-53 Scanning Docu ments Chapter 2 – If the values are in millimeters. 4 Touch [OK], and then touch [OK] in the next scre en that app ears. ...

  • Konica Minolta BIZHUB 600 - page 89

    2 Scanning Do cuments 2-54 bizhub 750/600 Scanning Docu ments Chapter 2 To specify the zoom ratio for scanning (Zoom setting) The document can be scan ned at the zoom ratio set in 0.1% increments. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Zoom]. 3 Select the zoom ratio. – To specify a zoom ratio near a preset ratio, touch the butt ...

  • Konica Minolta BIZHUB 600 - page 90

    Scanning Documents 2 bizhub 750/600 2-55 Scanning Docu ments Chapter 2 5 Select the desired zoom ratio type, and the n use the keypad to specify the zoom ratio. – To enlarge or reduce the scan at a zoom ratio that i s the same hor- izontally and vertically, select a z oom ratio for “Zoom with Constant X and Y Ratio”. – To enlarge or reduce ...

  • Konica Minolta BIZHUB 600 - page 91

    2 Scanning Do cuments 2-56 bizhub 750/600 Scanning Docu ments Chapter 2 Density Specify the density for scanning. 1 Touch [Scan Setting] in the Scan mode screen. 2 Touch [Density]. – To select a specific density, touch [Light] or [Da rk]. – Touch [Std.] to select the default setting. – To scan with the density most a ppr opriate for the detec ...

  • Konica Minolta BIZHUB 600 - page 92

    Scanning Documents 2 bizhub 750/600 2-57 Scanning Docu ments Chapter 2 Original S etting Specify the type of document that is loaded, for ex ample, if it contains mixed sizes or is folded in a zigzag. To specify the Original Settings 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Original Setting]. Item Description Mixed Origin al Select ...

  • Konica Minolta BIZHUB 600 - page 93

    2 Scanning Do cuments 2-58 bizhub 750/600 Scanning Docu ments Chapter 2 3 Specify the original settings. – If “Original Direction” is selecte d , a screen for selecting the direc- tion appears. Select the direct ion, and then touch [OK]. – To select the default setti ngs, touch [Reset]. – If “Bind” is selected, a screen for selecting ...

  • Konica Minolta BIZHUB 600 - page 94

    Scanning Documents 2 bizhub 750/600 2-59 Scanning Docu ments Chapter 2 Book Scanning (Application) Select this function when scann ing page spreads. The four scanning meth- ods listed below are a vailable. In addition, f rame erasing and center e rasing can be specif ied. Shadows that occur from sca nning page spreads can be erased from the scans . ...

  • Konica Minolta BIZHUB 600 - page 95

    2 Scanning Do cuments 2-60 bizhub 750/600 Scanning Docu ments Chapter 2 3 Touch [Book Scanning]. 4 Specify the Book Scann ing settings. – For details on the “E rase” and “Center Erase” fu nctions, refer to “Frame Erase (Application)” on page 2-65 and “Center Erase (Ap- plication)” on page 2-66. – If “Book Separation”, “Fro ...

  • Konica Minolta BIZHUB 600 - page 96

    Scanning Documents 2 bizhub 750/600 2-61 Scanning Docu ments Chapter 2 Booklet Pagi nation (App lication) The left and right pages of a p age spread can be scan ned separately. To specify Boo klet Pagination settings 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Booklet Paginati on]. Item Description Left Bind Sel ...

  • Konica Minolta BIZHUB 600 - page 97

    2 Scanning Do cuments 2-62 bizhub 750/600 Scanning Docu ments Chapter 2 4 Select the binding position for the document. 5 Touch [OK], and then touch [OK] in the next two scre ens that appe ar. Annotation (Application) When saving a scanned document, add the pres et domain name, sequence number, date, and time, and then save the document in a box. 1 ...

  • Konica Minolta BIZHUB 600 - page 98

    Scanning Documents 2 bizhub 750/600 2-63 Scanning Docu ments Chapter 2 4 Select the saving desti nation for the annotation user box. 5 Touch [OK] three ti mes. 2 Note If selecting an annotat ion user box, the box that was selected in [Broad- cast Destinations] is added. ! Detail Only the PDF file format can be saved. When saving data in an annotati ...

  • Konica Minolta BIZHUB 600 - page 99

    2 Scanning Do cuments 2-64 bizhub 750/600 Scanning Docu ments Chapter 2 Full Scan (Application) The entire document ca n be scanned. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Full S can]. – To cancel t he function, t ouch [Full Scan ] again. 4 Touch [OK], and then touch [OK] in the next screen that appears. ...

  • Konica Minolta BIZHUB 600 - page 100

    Scanning Documents 2 bizhub 750/600 2-65 Scanning Docu ments Chapter 2 Frame Erase (Application) Erases the perimeter of the document. The width to be erased can also be specified separately for the top, left, ri ght, and bottom sides within th e range of 1/16 in. to 2 in. If the width to be erased is speci fied using the Book Erase fun ctions in t ...

  • Konica Minolta BIZHUB 600 - page 101

    2 Scanning Do cuments 2-66 bizhub 750/600 Scanning Docu ments Chapter 2 4 Specify the width to be erase d. – To erase all sides wi th the same width, touch [Frame] and enter the value. – To specify the width separately fo r the top, left, right, and bottom sides, touch the corresponding button an d enter the value. To specify that no area is er ...

  • Konica Minolta BIZHUB 600 - page 102

    Scanning Documents 2 bizhub 750/600 2-67 Scanning Docu ments Chapter 2 3 Touch [Center Erase]. 4 Touch [+] or [-] or use the keypad to adjust t he width of the erased area . – If the values are in millimeters. 5 Touch [OK], and then touch [OK] in the next two scre ens that appe ar. ...

  • Konica Minolta BIZHUB 600 - page 103

    2 Scanning Do cuments 2-68 bizhub 750/600 Scanning Docu ments Chapter 2 Non-Image Area Erase (Application) The shadows along the edges of a docume nt can be erased from the scan. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Non-Ima ge Area Erase]. – To cancel the function, t ouch [Non-Image Area Erase] again. 4 ...

  • Konica Minolta BIZHUB 600 - page 104

    Scanning Documents 2 bizhub 750/600 2-69 Scanning Docu ments Chapter 2 Neg-/Pos. Reverse (Application) The black and white areas of the docume nt can be reversed in the scan. 1 Touch [Scan Settings] in the Scan mode screen. 2 Touch [Application]. 3 Touch [Neg-/Pos. Reverse]. – To cancel the functi on, touch [Neg-/Pos. Reverse] again. 4 Touch [OK] ...

  • Konica Minolta BIZHUB 600 - page 105

    2 Scanning Do cuments 2-70 bizhub 750/600 Scanning Docu ments Chapter 2 Separate Scan The scan operat ion can be divided i nto several sessions fo r various types of documents, for example, when all pages of a document cannot be loaded into the ADF, when placing th e document on the original gl ass, or when sin- gle-sided documents are combined wit ...

  • Konica Minolta BIZHUB 600 - page 106

    Scanning Documents 2 bizhub 750/600 2-71 Scanning Docu ments Chapter 2 4 After all pages have been scan ned, touch [Finish]. 5 Press the [Start] key. ...

  • Konica Minolta BIZHUB 600 - page 107

    2 Scanning Do cuments 2-72 bizhub 750/600 Scanning Docu ments Chapter 2 File Name You can chan ge the file na me to be saved. ! Detail If a file name is not specified when the data was sca nned, it will au tomat- ically be specified by combining the mode and the date and tim e at the time the file was saved. For specifyin g the file name, re fer to ...

  • Konica Minolta BIZHUB 600 - page 108

    Scanning Documents 2 bizhub 750/600 2-73 Scanning Docu ments Chapter 2 2.7 Checking the Settings Checking the Settings The selected se tting can be checke d in detail. The de stination can be changed on this screen. The settings that can be viewed an d changed are as follows: ! Detail [Edit] is not displayed when “Manua l Destination Input” is ...

  • Konica Minolta BIZHUB 600 - page 109

    2 Scanning Do cuments 2-74 bizhub 750/600 Scanning Docu ments Chapter 2 2 Note If Changing the “From” Ad dress from [Administrator Setting] — [ System Setting] — [Restrict User Access] — [Restrict Access to job Setting] is specified as restricted, direct input cannot be performed. To check a job 1 Press the [Mode Check] key in the control ...

  • Konica Minolta BIZHUB 600 - page 110

    Scanning Documents 2 bizhub 750/600 2-75 Scanning Docu ments Chapter 2 3 Touch [Detail]. 4 Check the details. ...

  • Konica Minolta BIZHUB 600 - page 111

    2 Scanning Do cuments 2-76 bizhub 750/600 Scanning Docu ments Chapter 2 ? How do you correct the destination? % Touch [Edit] to display the direct input screen on which the address can be corrected. After corre cting the destination, touch [OK]. ? How do you specify the notification destination? % Touch [Set Dest.] to display the address book. Spec ...

  • Konica Minolta BIZHUB 600 - page 112

    Scanning Documents 2 bizhub 750/600 2-77 Scanning Docu ments Chapter 2 ? Can an address th at is directly entered be registere d in the address book? % To register the address to the a ddress book, touch [Save in Add. Book]. ? What type of informati on must be entered? % Touch [Index], and then specify the characters for indexing the ad- dress in t ...

  • Konica Minolta BIZHUB 600 - page 113

    2 Scanning Do cuments 2-78 bizhub 750/600 Scanning Docu ments Chapter 2 6 Touch [Close]. 2 Note When the settings are ch anged, the destination whose settings have been changed is moved to the end of the list of registered destinations. ...

  • Konica Minolta BIZHUB 600 - page 114

    Scanning Documents 2 bizhub 750/600 2-79 Scanning Docu ments Chapter 2 Deleting Unneeded Destinations The selected destina tion can be deleted. 1 Press the [Mode Check] key in t he control panel whil e the Scan mode screen is displayed. The Mode Check screen appears. 2 Select the desired job from the list of registered jobs. 3 Touch [Delete]. A con ...

  • Konica Minolta BIZHUB 600 - page 115

    2 Scanning Do cuments 2-80 bizhub 750/600 Scanning Docu ments Chapter 2 4 Touch [Yes] to delete the job. 5 Touch [Close]. ...

  • Konica Minolta BIZHUB 600 - page 116

    Scanning Documents 2 bizhub 750/600 2-81 Scanning Docu ments Chapter 2 Specifying E-Mail Settings When the data is sent , an e-mail contai ning information about the da ta, such as the file name, can be sent to a specified e-mail address. The file name is also used in Scan to FTP and Scan to SMB. The settings that can be specified are as fol lows: ...

  • Konica Minolta BIZHUB 600 - page 117

    2 Scanning Do cuments 2-82 bizhub 750/600 Scanning Docu ments Chapter 2 To change the e-mail settings 1 Press the [Mode Check] key in the control pane l while the Sca n mode screen is displayed. The Mode Check screen appears. 2 Touch [E-Mail Setting]. A confirmation message appears. 3 Check the information an d change it a s necessary. 4 Touch [Clo ...

  • Konica Minolta BIZHUB 600 - page 118

    Scanning Documents 2 bizhub 750/600 2-83 Scanning Docu ments Chapter 2 2.8 Checking th e Scanner Transmission Log A job list of scanner transmissions ca n be displayed from the control panel. ! Detail For details on the function of each button, refer to the User’s Guide [Copy Operations]. Displaying the Current Jobs List 1 Touch [Job List] on th ...

  • Konica Minolta BIZHUB 600 - page 119

    2 Scanning Do cuments 2-84 bizhub 750/600 Scanning Docu ments Chapter 2 Displaying the Job History List 1 Touch [Job List]. The Print tab of the Job Li st screen appears. 2 Touch [Scan]. The Current Jobs list of the Scan tab appear s. 3 Touch [Job History]. The Active Jobs list appears in the Job History list of the Scan tab. The first screen that ...

  • Konica Minolta BIZHUB 600 - page 120

    Scanning Documents 2 bizhub 750/600 2-85 Scanning Docu ments Chapter 2 Displayed Informatio n The following information is displayed on the Scan tab of the Job List screen. Item Description No. Displays the job ID number that is as signed when a job is registered. Type Displays the transmiss ion type. Status (o nly on the Curre nt Jobs list) Displa ...

  • Konica Minolta BIZHUB 600 - page 121

    2 Scanning Do cuments 2-86 bizhub 750/600 Scanning Docu ments Chapter 2 ...

  • Konica Minolta BIZHUB 600 - page 122

    3 Specifying Settings Fro m the Cont rol Panel Chapter 3 Specifying Settings From the Control Panel ...

  • Konica Minolta BIZHUB 600 - page 123

    3 Specifying S ettings From the Control Pa nel 3-2 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Specifying Settings From the Control Panel 3.1 Settings on the Contro l Panel The Utility mode is used to specify basic settings for using the machine and specifica tions for advanced fu nctions. This chapter explains how to s ...

  • Konica Minolta BIZHUB 600 - page 124

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-3 Specifying Settings Fro m the Cont rol Panel Chapter 3 Administrator Setting Outputs the destinations, sub- jects, and text tha t are regist ered in this machine in a li st. “One-Touch Re gistration L ist” on page 3-36 Creates a filing number box. “Cre ating Annotation User Bo x ...

  • Konica Minolta BIZHUB 600 - page 125

    3 Specifying S ettings From the Control Pa nel 3-4 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Other Related Se ttings Though the setup procedure is not cove red in this manual, there are items that are partially related to the scanning functions and network connecti on. For details on these items, refer to th e correspon ...

  • Konica Minolta BIZHUB 600 - page 126

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-5 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.2 Displaying Setup Screens To display the Scan screen 1 Press the [Utility/Counter] key. – In Utility mode, an item can also be selected by pressing the key in the keypad for the number beside the desired button. For [1 One- T ...

  • Konica Minolta BIZHUB 600 - page 127

    3 Specifying S ettings From the Control Pa nel 3-6 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 The Scan screen appears. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [Close] in each scre en unti ...

  • Konica Minolta BIZHUB 600 - page 128

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-7 Specifying Settings Fro m the Cont rol Panel Chapter 3 To display the User Setting screen 1 Press the [Utility/Counter] key. 2 Touch [2 User Setting]. – In Utility mode, an item can also be selected by pressing the key in the keypad for the number beside the desired button. For “2 ...

  • Konica Minolta BIZHUB 600 - page 129

    3 Specifying S ettings From the Control Pa nel 3-8 bizhub 75 0/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [Close] in each scre en until the screen for the Copy ...

  • Konica Minolta BIZHUB 600 - page 130

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-9 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Type in the password, and then touch [OK]. The Administrator Setti ng screen appears. 2 Note To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press the [Utility/Counter] key. Otherwise, canc ...

  • Konica Minolta BIZHUB 600 - page 131

    3 Specifying S ettings From the Control Pa nel 3-10 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.3 Registering Abbreviated Destinations Abbreviated destinations can be spe cified. Up to 2000 destinations can be registered when the optional hard disk drive is installed, and up to 100 0 des- tinations can be registered if t ...

  • Konica Minolta BIZHUB 600 - page 132

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-11 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Touch [OK]. 8 Touch [Index] and touc h the desired button. – This specifies the ch aracters used to index the destination. – For destination s that are ofte n used, sp ecify [Ma in] at th e same time, and it will be easier ...

  • Konica Minolta BIZHUB 600 - page 133

    3 Specifying S ettings From the Control Pa nel 3-12 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C ...

  • Konica Minolta BIZHUB 600 - page 134

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-13 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [New]. The Register FTP screen appears. 4 Touch [Name] and typ e in the name using the keyboard that appears on the screen. 5 Touch [OK]. 6 Touch [Host Address]. – Enter the host add ress or IP address. – To enter the ...

  • Konica Minolta BIZHUB 600 - page 135

    3 Specifying S ettings From the Control Pa nel 3-14 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If selecting [Host Name Input], check that the DNS settings are specified correctly before making th e selection. For details, refer to “TCP/IP Settings” on page 3-46. 7 Touch [OK]. 8 Touch [File Path] and type in the fi ...

  • Konica Minolta BIZHUB 600 - page 136

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-15 Specifying Settings Fro m the Cont rol Panel Chapter 3 14 Touch [OK]. If the first character of the name i s a letter, the first character is auto- matically re gistered as the in dexing charac ter. 15 Touch [Index] and touc h the desired button. – This specifies the ch aracters us ...

  • Konica Minolta BIZHUB 600 - page 137

    3 Specifying S ettings From the Control Pa nel 3-16 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be complet ed unless settings have been speci- fied for “Name”, “Host Address”, “File Path”, “User ID”, and “Password”. ! Detail To check the registered de stination, touc h the ...

  • Konica Minolta BIZHUB 600 - page 138

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-17 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMB Destinations SMB destinations can be registered. 1 In the Scan screen, to uch [1 Address Book]. (R efer to page 3-5 for more details.) 2 Touch [3 SMB]. The SMB screen appears. 3 Touch [New]. The Register SMB screen appears. 4 ...

  • Konica Minolta BIZHUB 600 - page 139

    3 Specifying S ettings From the Control Pa nel 3-18 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – To enter the IP address, touch [IP Address Input], and then enter the value. If the value was incorrectly entere d, press the [C] (clear) key to erase the value, and then us e the keypad to type in the cor- rect value. To ch ...

  • Konica Minolta BIZHUB 600 - page 140

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-19 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If the first characte r of the name is a l etter, the first charac ter is au- tomatically registe red as the indexi ng character. – The registration cannot be co mpleted unless setti ngs have been specified for “Name”, ...

  • Konica Minolta BIZHUB 600 - page 141

    3 Specifying S ettings From the Control Pa nel 3-20 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Box Destinations Box destinations ca n be registered. The Box destination s can be used when the optional hard disk drive is installed. 1 In the Scan screen, to uch [1 Address Book]. (R efer to page 3-5 for more details.) 2 Touc ...

  • Konica Minolta BIZHUB 600 - page 142

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-21 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If the first characte r of the name is a l etter, the first charac ter is au- tomatically registe red as the indexi ng character. – The registration cannot be co mpleted unless setti ngs have been specified fo r “Name” ...

  • Konica Minolta BIZHUB 600 - page 143

    3 Specifying S ettings From the Control Pa nel 3-22 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.4 Registering Group Destinations Group destinations can be registered. Up to 100 groups can be registered. Up to 500 destina tions can be regis- tered to one group. To regist er a group destinatio n 1 In the Scan screen , touc ...

  • Konica Minolta BIZHUB 600 - page 144

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-23 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Touch [Close]. – To check the registered destinati ons, touch [Check Setting]. – The registration cannot be co mpleted unless setti ngs have been specified for “Name” and “Destination”. 7 Touch [OK]. The group desti ...

  • Konica Minolta BIZHUB 600 - page 145

    3 Specifying S ettings From the Control Pa nel 3-24 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.5 Registering Program Dest inations Program destination s can be registered. Only one destin ation can be regis- tered in a program. Up to 400 destinatio ns can be registered in program des- tinations, including fax program de ...

  • Konica Minolta BIZHUB 600 - page 146

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-25 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Touch [Destination]. – To select from registered destinations: Check that [Select from Address B ook] is selected, touch the but- ton for the desired destination ty pe, and then sele ct the destina- tions to be registered. ? ...

  • Konica Minolta BIZHUB 600 - page 147

    3 Specifying S ettings From the Control Pa nel 3-26 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C ...

  • Konica Minolta BIZHUB 600 - page 148

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-27 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.6 Specifying E-Mail Settings Up to 10 e-mail su bjects an d text can be registered. Subject E-Mail subj ects can be regi stered. 1 In the Scan screen, tou ch [4 Subjec t/Text (for E-mail)]. (Refer to page 3-5 for more details.) ...

  • Konica Minolta BIZHUB 600 - page 149

    3 Specifying S ettings From the Control Pa nel 3-28 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be completed unless a setting is specified for “Subject”. ! Detail To check the registered setting, touch the button for the desired subject, and then touch [Det ails]. To delete the registered ...

  • Konica Minolta BIZHUB 600 - page 150

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-29 Specifying Settings Fro m the Cont rol Panel Chapter 3 Text E-mail text can be re gistered. The settings that we re registered when the data was sent can be selected. 1 In the Scan screen, tou ch [4 Subjec t/Text (for E-mail)]. (Refer to page 3-5 for more details.) 2 Touch [2 Text]. ...

  • Konica Minolta BIZHUB 600 - page 151

    3 Specifying S ettings From the Control Pa nel 3-30 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note The registration cannot be completed unless a setting is specified for “Text”. ! Detail To check the registered setting, touch the button for the desired text, and then touch [Details]. To delete the registered settin ...

  • Konica Minolta BIZHUB 600 - page 152

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-31 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.7 Setting the Main Scan Mode Screen Default Tab The default screen that appears in Scan mode can be specified. (Default set- ting: Program) 1 In the User Setting screen, touch [2 Display Setti ng]. (Refer to page 3-7 for more d ...

  • Konica Minolta BIZHUB 600 - page 153

    3 Specifying S ettings From the Control Pa nel 3-32 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Program Default The default screen that appears in th e Program tab in Scan mode c an be specifie d. (Defaul t setting: PAGE1 ) 1 In the User Setting screen, touch [2 Display Setting]. – To display the User Setting screen, ref ...

  • Konica Minolta BIZHUB 600 - page 154

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-33 Specifying Settings Fro m the Cont rol Panel Chapter 3 Address Book Default Index You can select the index type that is displayed in the address book . (Default setting: Main) 1 In the User Setting screen, touch [2 Display Setting]. 2 Touch [3 Scan Basic Scre en Default Setting]. 3 T ...

  • Konica Minolta BIZHUB 600 - page 155

    3 Specifying S ettings From the Control Pa nel 3-34 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Address Ty pe Symbol Display You can specify whether to display th e symbol of the address type. (Default setting: ON) 1 In the User Setting screen, touch [2 Display Setting]. 2 Touch [3 Scan Basic Screen Def ault Setting]. 3 To ...

  • Konica Minolta BIZHUB 600 - page 156

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-35 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.8 Setting the Save Format of the Data to Be Scanned Black Compression Level The black compre ssion level can be specifi ed. (Default set ting: MMR) - [MH]: The data size is large. - [MMR]: The data size is small. To specify the ...

  • Konica Minolta BIZHUB 600 - page 157

    3 Specifying S ettings From the Control Pa nel 3-36 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.9 One -Touch Registrati on List You can output the destinations, subjects, and text that are registered in this machine in a list. The type of lists that can be output are described below. Address Boo k List 1 In the Administr ...

  • Konica Minolta BIZHUB 600 - page 158

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-37 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Select the registration number and des tination type, and then touch [Print]. 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. Group List 1 In the A ...

  • Konica Minolta BIZHUB 600 - page 159

    3 Specifying S ettings From the Control Pa nel 3-38 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [2 Group List]. 4 Select the registration number, and then touch [Pri nt]. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. Program List 1 In ...

  • Konica Minolta BIZHUB 600 - page 160

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-39 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [3 Program List]. 4 Select the registration number and des tination type, and then touch [Print]. 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page ...

  • Konica Minolta BIZHUB 600 - page 161

    3 Specifying S ettings From the Control Pa nel 3-40 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [4 E-Mail Su bject/Text List]. 4 Select the paper size, and simplex or duplex printing, and then press [Start] key. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting ...

  • Konica Minolta BIZHUB 600 - page 162

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-41 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.10 Creating Annota tion User Boxes Annotation user boxes can be u sed only if the optional hard disk drive is in- stalled . 2 Note Register the annotation user boxes from the Administrator Setting screen. To display the Adminis ...

  • Konica Minolta BIZHUB 600 - page 163

    3 Specifying S ettings From the Control Pa nel 3-42 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Reminder If “Password Rules” is set to “ON” , a password con taining less than 8 characters cannot be regi stered. If a box password containing less than 8 cha racters has already been registered, chan ge the password ...

  • Konica Minolta BIZHUB 600 - page 164

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-43 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch [4 Annotation User Box]. 4 Touch [New]. The registration screen appears. 5 Specify the various settings for the box. 6 Touch [Fwd.]. Registration scre en 2/3 appears. ...

  • Konica Minolta BIZHUB 600 - page 165

    3 Specifying S ettings From the Control Pa nel 3-44 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settin gs. 8 Touch [Fwd.]. Registration scre en 3/3 appears. 9 Specify the desired settin gs. 10 Touch [OK]. 11 Touch [Close]. The box is registered. ...

  • Konica Minolta BIZHUB 600 - page 166

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-45 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.11 Specifying Network Settings Whether or not a network is used can be specif ied. To specify network settings 1 In the Administrator Setting sc reen, touch [5 Network Setting]. 2 In the Net work Setting screen , touch [1 Netwo ...

  • Konica Minolta BIZHUB 600 - page 167

    3 Specifying S ettings From the Control Pa nel 3-46 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.12 TCP/IP Settings The settings for using the machine on a TCP/IP network can be specified. To activate all network se tting changes, turn the main power off and then back on. 2 Reminder When turning the main power switch OFF ...

  • Konica Minolta BIZHUB 600 - page 168

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-47 Specifying Settings Fro m the Cont rol Panel Chapter 3 Items To Be Specified The following items are specifi ed. TCP/IP Setting screen 1 /5 TCP/IP Setting screen 2 /5 TCP/IP Setting screen 3 /5 TCP/IP Setting screen 4 /5 Item Description TCP/IP Setting Specify whether to turn on the ...

  • Konica Minolta BIZHUB 600 - page 169

    3 Specifying S ettings From the Control Pa nel 3-48 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 TCP/IP Setting screen 5/5 2 Note Be sure to enter t he host name an d domain name so that the total number of characte rs entered is within 254 characters. To specify TCP/IP settings 1 In the Administrator Setting screen, to uch ...

  • Konica Minolta BIZHUB 600 - page 170

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-49 Specifying Settings Fro m the Cont rol Panel Chapter 3 – If [Auto Input] was selected un der “I P Address Setting Method”, specify the automatic ac quisition procedure, an d then touch [OK]. 6 Touch [Fwd. → ]. TCP/IP Setti ng screen 3/5 app ears. 7 Specify the desired setting ...

  • Konica Minolta BIZHUB 600 - page 171

    3 Specifying S ettings From the Control Pa nel 3-50 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Specify the desired settin gs. 10 Touch [Fwd. → ]. TCP/IP Setti ng screen 5/5 app ears. 11 Specify the desired settin gs. 12 Touch [OK]. The TCP/IP settings are applied. 2 Note To cancel changes to the setting, touch [Can ce ...

  • Konica Minolta BIZHUB 600 - page 172

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-51 Specifying Settings Fro m the Cont rol Panel Chapter 3 IP Filtering The IP addresses in the specified ra nges can be permitted or denied. IP addresses can connect d epending on whether “Enable” or “Disable” has been selected for “P ermit Access” and “Deny Acce ss” in ...

  • Konica Minolta BIZHUB 600 - page 173

    3 Specifying S ettings From the Control Pa nel 3-52 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 Touch the button for a set (Set 1 to Set 5), and then use the keypad to type in the add ress range. – The range setting cannot include “0. 0.0.0”. For example, to specify all addresses before 192.168.1 .20, specify the r ...

  • Konica Minolta BIZHUB 600 - page 174

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-53 Specifying Settings Fro m the Cont rol Panel Chapter 3 RAW Port No. Specify the RAW port numbers used by the printer. By specifying multiple port numbers, multiple data ca n be accepted simultaneously. 1 In TCP/IP Setting screen 5/5, touch [RAW Port No.]. The RAW Port Numbe r screen ...

  • Konica Minolta BIZHUB 600 - page 175

    3 Specifying S ettings From the Control Pa nel 3-54 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.13 NetWare Settings The settings for using the machi ne on a NetWare network can be specif ied. NetWare Parameters The NetWare settings are a s follows: NetWare Setting screen 1/5 NetWare Setting screen 2/5 NetWare Setting scr ...

  • Konica Minolta BIZHUB 600 - page 176

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-55 Specifying Settings Fro m the Cont rol Panel Chapter 3 NetWare Se tting scre en 5/5 To specify NetWare settings 1 In the Administrator S etting screen, to uch [5 Network Setting]. (Refer to page 3-8 for more details.) 2 In the Net work Setting screen, touch [3 NetWare Setting]. NetWa ...

  • Konica Minolta BIZHUB 600 - page 177

    3 Specifying S ettings From the Control Pa nel 3-56 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Specify the desired settin gs. 6 Touch [Fwd. → ]. Pserver Setting sc reen 3/5 appears. 7 Specify the desired settin gs. 8 Touch [Fwd. → ]. Pserver Setting sc reen 4/5 appears. 9 Specify the desired settin gs. 10 Touch [Fwd ...

  • Konica Minolta BIZHUB 600 - page 178

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-57 Specifying Settings Fro m the Cont rol Panel Chapter 3 11 Specify the desired settings. 12 Touch [OK]. The NetWare settings are appli ed. 2 Note To cance l changes to the setting, touch [C ancel]. To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or ...

  • Konica Minolta BIZHUB 600 - page 179

    3 Specifying S ettings From the Control Pa nel 3-58 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Status The NetWare status can be verified . 1 In NetWare Setting screen 2 /5, touch [Status]. The NetWare Statu s screen appear s. 2 Touch [ ] or [ ] to select the server to verify. 3 Verify the NetWare status. 4 Touch [Close]. ...

  • Konica Minolta BIZHUB 600 - page 180

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-59 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.14 http Server Settings You can specify the http server sett ings, PageScope Web Connection set- tings, and the IPP settings used by the printer of this machine. IPP and http Parameters The IPP parameters are as follows: http S ...

  • Konica Minolta BIZHUB 600 - page 181

    3 Specifying S ettings From the Control Pa nel 3-60 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify IPP and http sett ings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [4 http Server Setting]. The http Server Setting ...

  • Konica Minolta BIZHUB 600 - page 182

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-61 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify ea ch item. 8 Touch [Fwd. → ]. http Server Setting screen 4/4 appears. 9 Specify the desired settings. 10 Touch [OK]. The IPP settings a re applied. 2 Note To cance l changes to the setting, touch [C ancel]. To quit s ...

  • Konica Minolta BIZHUB 600 - page 183

    3 Specifying S ettings From the Control Pa nel 3-62 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Support Operat ion Specify whether each function is supported in IPP communication. [OFF]: Responds as not supported. [ON]: Responds to communi cation. No response is returned for “Cancel Job”, “Open Job”, and “Open Jo ...

  • Konica Minolta BIZHUB 600 - page 184

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-63 Specifying Settings Fro m the Cont rol Panel Chapter 3 Printer Information The printer information can be specified. 1 In the IPP Se tting screen, touch [Printer Information]. Printer Information screen 1/2 ap pears. 2 Touch [Printer Name]. The Printer Name screen appears. 3 Type in ...

  • Konica Minolta BIZHUB 600 - page 185

    3 Specifying S ettings From the Control Pa nel 3-64 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Type in the printer location (up to 127 charac ters). 7 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The printer location is set, the Pr inter Information screen appears again. 8 Touch [Fwd. → ]. Printe ...

  • Konica Minolta BIZHUB 600 - page 186

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-65 Specifying Settings Fro m the Cont rol Panel Chapter 3 10 Type in the printer informati on (up to 127 characters). – To cancel change s to the setting, touch [Cancel]. 11 Touch [OK]. The printer information is set, the Printer Info rmation screen ap pears again. 12 In Printer Infor ...

  • Konica Minolta BIZHUB 600 - page 187

    3 Specifying S ettings From the Control Pa nel 3-66 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.15 FTP Settings Settings for sending scan data to FTP servers can be specified. FTP Par amete rs The FTP parameters are as follows: FTP Setting screen 1/3 FTP Setting screen 2/3 FTP Setting screen 3/3 Item De script ion Proxy ...

  • Konica Minolta BIZHUB 600 - page 188

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-67 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify FTP settings 1 In the Administrator S etting screen, to uch [5 Network Setting]. (Refer to page 3-8 for more details.) 2 In the Net work Setting screen, touch [5 FTP Setti ng]. FTP Setting scree n 1/3 appears. 3 Specif ...

  • Konica Minolta BIZHUB 600 - page 189

    3 Specifying S ettings From the Control Pa nel 3-68 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settin gs. 8 Touch [OK]. The FTP settings are applied. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise ...

  • Konica Minolta BIZHUB 600 - page 190

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-69 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.16 SMB Set tings You can specify the settings for sharing printers and sending files over a net- work. SMB Parameters The SMB parameters are as follows: SMB Setting screen 1/4 WINS Setting screen 2/4 WINS Setting screen 3/4 Cli ...

  • Konica Minolta BIZHUB 600 - page 191

    3 Specifying S ettings From the Control Pa nel 3-70 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note When performing SMB scans (host name setting) via a router, specif y the WINS settings according to th e SMB transmission settings. To specify SMB sett ings 1 In the Administrator Setting screen, to uch [5 Netw ork Settin ...

  • Konica Minolta BIZHUB 600 - page 192

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-71 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settings. 8 Touch [Fwd. → ]. SMB Setting screen 4/4 appears. 9 Specify the desired settings. 10 Touch [OK]. The SMB settings are applied. ...

  • Konica Minolta BIZHUB 600 - page 193

    3 Specifying S ettings From the Control Pa nel 3-72 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [C ...

  • Konica Minolta BIZHUB 600 - page 194

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-73 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.17 AppleTalk Settings You can specify the settings for network printi ng using AppleTalk. AppleTalk Parameters The AppleTalk parameters are as follows: To specify AppleTalk settings 1 In the Administrator S etting screen, to uc ...

  • Konica Minolta BIZHUB 600 - page 195

    3 Specifying S ettings From the Control Pa nel 3-74 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [OK]. The AppleTalk settings a re applied. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. ...

  • Konica Minolta BIZHUB 600 - page 196

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-75 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.18 Enabling LDAP Sett ings The LDAP func tion to which t he machine can connect and search a nd re- trieve information ca n be enabled/disabled. Enabling LDAP Parameters The Enabling LDAP parameters are as follows: To specify E ...

  • Konica Minolta BIZHUB 600 - page 197

    3 Specifying S ettings From the Control Pa nel 3-76 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen ...

  • Konica Minolta BIZHUB 600 - page 198

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-77 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.19 Setting Up LDAP Settings The LDAP server can be registered and authen tication settings ca n be spec- ified. LDAP Server Registration Parameters The LDAP server registration parameters are as follows: Setting Up LDAP screen ...

  • Konica Minolta BIZHUB 600 - page 199

    3 Specifying S ettings From the Control Pa nel 3-78 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Setting Up LDAP screen 3/6 Setting Up LDAP screen 4/6 Setting Up LDAP screen 5/6 Item De script ion Enable SSL Sets wh ether to use SSL (dat a encryptio n) when connecting to the LDAP server. Whe n SSL is used, the content that ...

  • Konica Minolta BIZHUB 600 - page 200

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-79 Specifying Settings Fro m the Cont rol Panel Chapter 3 Setting Up LDAP screen 6/6 Use referral Select whether to use the referral setting. When refer ral is used, the s earch base that was spec ified in LDAP Sever Setting se arches th e top and bo ttom levels as the st arting point. ...

  • Konica Minolta BIZHUB 600 - page 201

    3 Specifying S ettings From the Control Pa nel 3-80 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify Setting Up LDAP setti ngs 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [8 LDAP Setting]. 3 In the LDAP Setti ng scree ...

  • Konica Minolta BIZHUB 600 - page 202

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-81 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 Specify the desired settings. 8 Touch [Fwd. → ]. Setting Up LDAP screen 3/6 appears. 9 Specify the desired settings. 10 Touch [Fwd. → ]. Setting Up LDAP screen 4/6 appears. 11 Specify the desired settings. 12 Touch [Fwd. ? ...

  • Konica Minolta BIZHUB 600 - page 203

    3 Specifying S ettings From the Control Pa nel 3-82 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 13 Specify the desired settin g. 14 Touch [Fwd. → ]. Setting Up LDAP screen 6/6 appears. 15 Specify the desired settin gs. 16 Touch [OK]. The LDAP server registration and a uthentication are set . 2 Note To cancel changes to t ...

  • Konica Minolta BIZHUB 600 - page 204

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-83 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note Be sure to use an authentication meth od like the one that is used by the LDAP server. For details, refer to th e manual of the LDAP server being used. If the auth entication meth od is specified as “GSS-SPNEGO”, enter ...

  • Konica Minolta BIZHUB 600 - page 205

    3 Specifying S ettings From the Control Pa nel 3-84 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Initial Setting for Search Detai ls The initial setting of the search condit ions wh en performing a deta iled search can be specified by “Nam e”, “E-Mail”, “Fax Number”, “Last Name”, “First Name”, “City” ...

  • Konica Minolta BIZHUB 600 - page 206

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-85 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cance l changes to the setting, touch [C ancel]. To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode by touching [Cl ...

  • Konica Minolta BIZHUB 600 - page 207

    3 Specifying S ettings From the Control Pa nel 3-86 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.20 Search Default Setting You can specify the LDAP server that is to perform searches by priority from the registered LDAP servers. To specify the detect default server settings 1 In the Administrator Setting screen, touch [5 ...

  • Konica Minolta BIZHUB 600 - page 208

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-87 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.21 E-Mail TX (SMTP) Settings Information such as the SMTP serve r that is re quired to se nd the da ta as an e-mail attachme nt in Scan mode can be specified. Also, e-mail authe ntica- tion can be specified. ! Detail If running ...

  • Konica Minolta BIZHUB 600 - page 209

    3 Specifying S ettings From the Control Pa nel 3-88 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 E-Mail TX (S MTP) screen 3/4 E-Mail TX (S MTP) screen 4/4 SMTP Detail screen To specify E-Mail TX (SMTP) settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the ...

  • Konica Minolta BIZHUB 600 - page 210

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-89 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 In the E-Mail Setting screen, touch [1 E-Mail TX (SMTP)]. E-Mail TX (SMTP) screen 1/4 appears. 4 Specify the desired settings. 5 Touch [Fwd. → ]. E-Mail TX (SMTP) screen 2/4 appears. 6 Specify the desired settings. 7 Touch [F ...

  • Konica Minolta BIZHUB 600 - page 211

    3 Specifying S ettings From the Control Pa nel 3-90 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Touch [Fwd. → ]. E-Mail TX (SMTP) screen 4/4 appears. 10 Specify the desired settin gs. 11 Touch [OK]. The SMTP server information is set. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Util ...

  • Konica Minolta BIZHUB 600 - page 212

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-91 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMTP Server Address The SMTP server add ress used to send e-mail can be specified. 1 In the E-Mail TX (SMTP) scre en 2/4, touch [Host Address]. The Host Address screen appears. 2 Touch [IP Address Input] or [Host Name Input]. – ...

  • Konica Minolta BIZHUB 600 - page 213

    3 Specifying S ettings From the Control Pa nel 3-92 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. If the host address exceeds 81 characte rs, touch [Details] to display the Host Address Detail screen with the rest of the host addresses. If the DNS setting i s not spec ...

  • Konica Minolta BIZHUB 600 - page 214

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-93 Specifying Settings Fro m the Cont rol Panel Chapter 3 SMTP Authentication Specify w hen the auth entication meth od is set to SMTP authentication. 1 In the SMTP Detail screen under SMTP Authentication, touch [ON]. The SMTP Authen tication screen a ppears. 2 In the SMTP Authenticatio ...

  • Konica Minolta BIZHUB 600 - page 215

    3 Specifying S ettings From the Control Pa nel 3-94 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Type in the password (up to 15 characters). 7 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The password is set, and the SMTP Au thentication scre en appears again. 8 In the SMTP Authentic ation screen, to ...

  • Konica Minolta BIZHUB 600 - page 216

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-95 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.22 E-Mail R X (POP) Settings You can specify the setti ngs to perform the authen tication of the e-mail sender with POP Before SMTP. E-Mail RX (POP) Parameters The E-Mail RX (POP) parameters are as follows: E-Mail RX (POP) scre ...

  • Konica Minolta BIZHUB 600 - page 217

    3 Specifying S ettings From the Control Pa nel 3-96 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify E-Mail RX (POP) settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [9 E-Mai l Setting]. 3 In the E-Mail Setting sc ...

  • Konica Minolta BIZHUB 600 - page 218

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-97 Specifying Settings Fro m the Cont rol Panel Chapter 3 9 Specify the desired settings. 10 Touch [OK]. The POP server information is set. ...

  • Konica Minolta BIZHUB 600 - page 219

    3 Specifying S ettings From the Control Pa nel 3-98 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 POP Server Address The POP server address that is used to receive e-mail can be specified. 1 In the E-Mail RX (POP) sc reen, touch [Host Address]. The Host Address screen app ears. 2 Touch [IP Address Input] or [Host Name Input] ...

  • Konica Minolta BIZHUB 600 - page 220

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-99 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.23 Device Settings Device informati on can be set. Device Parameters The device paramete rs are as follows: 2 Reminder When turning the main power switch OFF then ON, wait for 10 seconds or longer before t urning it ON aga in; ...

  • Konica Minolta BIZHUB 600 - page 221

    3 Specifying S ettings From the Control Pa nel 3-100 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Touch [OK]. The device information is set. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe ...

  • Konica Minolta BIZHUB 600 - page 222

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-101 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.24 Time Adjustment Settings The machine’s internal clock can be c orrected via the network. Time Adjus tment Parameters The time adjustment para meters are as follows: After specifying this setti ng, touch [1 System Setting] ...

  • Konica Minolta BIZHUB 600 - page 223

    3 Specifying S ettings From the Control Pa nel 3-102 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or press the [Utility/Counter] key. Othe rwise, cance l the Utility mode by touching [ ...

  • Konica Minolta BIZHUB 600 - page 224

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-103 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cance l changes to the setting, touch [C ancel]. ! Detail For the procedur e to enter characters using the keyboa rd that appears on the screen, refer to “E ntering text” on page 6-5. ...

  • Konica Minolta BIZHUB 600 - page 225

    3 Specifying S ettings From the Control Pa nel 3-104 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.25 Status Notificat ion Settings Settings for notifying the administrator of the machine’ s status by e-mail can be specified. The stat us notification is sent if the e-mail address is entered and if any of the notific atio ...

  • Konica Minolta BIZHUB 600 - page 226

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-105 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Specify the desired settings. Notification Item Setting The conditions under which notific ation of the machine’s status is to be sent by e-mail can be speci fied. 1 In the Status Notification Setting sc reen, touch [2 Notif ...

  • Konica Minolta BIZHUB 600 - page 227

    3 Specifying S ettings From the Control Pa nel 3-106 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.26 Total Counter Report Setting You can specify the total counter notifi cation schedule and notification des- tination. The settings that can be specifi ed in the total counter scre en are described below. To specify the tot ...

  • Konica Minolta BIZHUB 600 - page 228

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-107 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Adminis trator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To quit specifying the Utility mode se tting, touch [Exit] in th e sub display area or press ...

  • Konica Minolta BIZHUB 600 - page 229

    3 Specifying S ettings From the Control Pa nel 3-108 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 When “Weekly” is specified as the notif ication period When “Monthly” is specified as the notification period Item De script ion Interval of Week (s) Enter the interval of week s for sending the sche dule. To change th ...

  • Konica Minolta BIZHUB 600 - page 230

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-109 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify the notifi cation address settings 1 In the Total Counter Report Se tt ing screen, touch [Schedule1]. The Schedule1 settin g screen appears. 2 Specify the notificati on period. 3 Touch [OK]. The Total Counter Report S ...

  • Konica Minolta BIZHUB 600 - page 231

    3 Specifying S ettings From the Control Pa nel 3-110 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Select whether you want to use this schedule to send to this address. 6 Touch [OK], and then touch [OK] in the next screen that appears. The Total Counter Report Se tting screen appears again. 2 Note To cancel changes to the ...

  • Konica Minolta BIZHUB 600 - page 232

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-111 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.27 PING Confirmation Settings for checking the TCP/IP network using PING can be specifi ed. PING Confirmation Parameters The PING Confirmation pa rameters are as follows: To specify PING co nfirmation settings 1 In the Adminis ...

  • Konica Minolta BIZHUB 600 - page 233

    3 Specifying S ettings From the Control Pa nel 3-112 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 5 Touch [Close]. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area. Otherwise, cancel the Utility mode by touching [Close] in each screen until the screen f or the Copy , Fax, Scan or B o ...

  • Konica Minolta BIZHUB 600 - page 234

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-113 Specifying Settings Fro m the Cont rol Panel Chapter 3 PING TX Addres s The host address of the device to ping can be specified. 1 In the PING Con firmation sc reen, touch [Host Address]. The Host Address screen appears. 2 Touch [IP Address Input] or [Host Name Input]. – To specif ...

  • Konica Minolta BIZHUB 600 - page 235

    3 Specifying S ettings From the Control Pa nel 3-114 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To cancel changes to the setting, touch [Can cel]. ! Detail For the procedure to enter characters usin g the keyboar d that appear s on the screen, refer to “E ntering text” on page 6-5. ...

  • Konica Minolta BIZHUB 600 - page 236

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-115 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.28 SLP Settings The use of SLP can be enabled or disabled. If se t to “Enable”, devices can be searched using TWAIN. If set to “D isable”, device cannot be searched. To specify SLP settings 1 In the Administrator S ett ...

  • Konica Minolta BIZHUB 600 - page 237

    3 Specifying S ettings From the Control Pa nel 3-116 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.29 LPD Settings The use of LPD when printing can be enabled or disabled. To specify LPD settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setti ...

  • Konica Minolta BIZHUB 600 - page 238

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-117 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.30 Prefix/Suffix Settings The registered characters can be added to the e-mail address that is speci- fied when se nding e-mail. This elimin ates having to enter chara cters that are often entered such as the same domain name. ...

  • Konica Minolta BIZHUB 600 - page 239

    3 Specifying S ettings From the Control Pa nel 3-118 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Specify the desired settin gs. The prefix/suffix is set. If [ON] is selected, cont inue with t he registration of prefixes/suffixes. 2 Note To quit specifying the Utility mode sett ing, touch [Exit] in the sub display area or ...

  • Konica Minolta BIZHUB 600 - page 240

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-119 Specifying Settings Fro m the Cont rol Panel Chapter 3 Prefix/Suffix Setting The character strin gs that are used by th e prefix/suffix inpu t function can be registered. 1 In the Prefix/Suffi x Setting screen, touch [2 Prefix/Suffix Se tting]. The Prefix/Suffi x Setting screen appe ...

  • Konica Minolta BIZHUB 600 - page 241

    3 Specifying S ettings From the Control Pa nel 3-120 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [OK]. – To cancel changes to the setting, touch [C ancel]. The prefix is set. 5 Touch [Suffix]. The Suffix screen appears. 6 Enter the character string that is to be used as a suff ix (up to 64 char- acters). – For ...

  • Konica Minolta BIZHUB 600 - page 242

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-121 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.31 Action for In valid Certificate When this machine is to be connected t o an SSL serve r as a cl ient, you can specify the operation meth od when the validation of the SSL server certifi- cate has expired. 2 Note The functio ...

  • Konica Minolta BIZHUB 600 - page 243

    3 Specifying S ettings From the Control Pa nel 3-122 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett i ...

  • Konica Minolta BIZHUB 600 - page 244

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-123 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.32 SNMP Set tings SNMP settings can be specified. SNMP Parameters The SNMP parameters are as follows: The v1/v2c settings that ca n be specified are described below. Item Description SNMP Sett ing Specify whet her to use SN MP ...

  • Konica Minolta BIZHUB 600 - page 245

    3 Specifying S ettings From the Control Pa nel 3-124 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify SNMP settings 1 In the Administrator Setting screen, to uch [5 Netw ork Setting]. (Refer to page 3-8 for more details.) 2 In the Network Setting screen, touch [Fwd.->], then [1 SNMP Setting]. 3 Specify the desired ...

  • Konica Minolta BIZHUB 600 - page 246

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-125 Specifying Settings Fro m the Cont rol Panel Chapter 3 v1/v2c Setting 1 In the Net work Setting scre en, touch [v1/v2c Setting]. 2 Specify the settings for v1/v2c. 3 Touch [OK]. The SNMP Settin g screen appears aga in. ...

  • Konica Minolta BIZHUB 600 - page 247

    3 Specifying S ettings From the Control Pa nel 3-126 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 v3 Setting The settings that can be sp ecified are described below. SNMP v3 Setting screen 1/3 SNMP v3 Read Setting screen 2/3 SNMP v3 Write Setting screen 3/3 Item De script ion Context Name Specify th e context name. Use the ...

  • Konica Minolta BIZHUB 600 - page 248

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-127 Specifying Settings Fro m the Cont rol Panel Chapter 3 To specify the v3 settings 1 In the Net work Setting screen, touch [v3 Setti ng]. SNMP v3 Setting screen 1/3 appears. 2 Specify the desired settings. 3 Touch [Fwd. → ]. SNMP v3 Setting screen 2/3 appears. 4 Specify the desired ...

  • Konica Minolta BIZHUB 600 - page 249

    3 Specifying S ettings From the Control Pa nel 3-128 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 Specify the desired settin gs. 7 Touch [OK]. The SNMP Setti ng screen appears aga in. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett ing, touch [Exit] in the sub display are ...

  • Konica Minolta BIZHUB 600 - page 250

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-129 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.33 Bonjour Setting You can specify the Bon jour setting. Bonjour Setting scree n To specify the Bonjour settings 1 In the Administrator Setting sc reen, touch [5 Network Setting]. 2 In the Net work Setting screen, touch [Fwd. ...

  • Konica Minolta BIZHUB 600 - page 251

    3 Specifying S ettings From the Control Pa nel 3-130 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. 2 Note To cancel changes to the setting, touch [Can cel]. To quit specifying the Utility mode sett i ...

  • Konica Minolta BIZHUB 600 - page 252

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-131 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.34 TCP Socket Setting You can specify the TCP sock et settings. The TCP socket is used for the computer programs and the data tr ansmission of this machine. The settings that can be sp ecified are described below. TCP Socket S ...

  • Konica Minolta BIZHUB 600 - page 253

    3 Specifying S ettings From the Control Pa nel 3-132 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 4 Touch [Fwd. → ]. TCP Socket Setting screen 2/2 appears. 5 Specify the desired settin gs. 6 Touch [OK]. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on pag ...

  • Konica Minolta BIZHUB 600 - page 254

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-133 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.35 OpenAPI Settings Specify whethe r or not therface is open to soft ware with a fu nction for com- municating with t he copier. The settings for “Access Setting”, “Port No.”, “SSL”, and “Auth entication” of Op ...

  • Konica Minolta BIZHUB 600 - page 255

    3 Specifying S ettings From the Control Pa nel 3-134 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Port No. Specify the port number that other systems access using OpenAPI (initial port number: 50001, init ial port number (SSL): 50003). 1 In the Administrator Setting screen , touch [9 System Connecti on]. (Re- fer to page 3- ...

  • Konica Minolta BIZHUB 600 - page 256

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-135 Specifying Settings Fro m the Cont rol Panel Chapter 3 SSL Specify whether to encrypt with SSL access from other systems that use OpenAPI. (D efault setting: O FF) 1 In the Administrator Setting screen , touch [9 Syste m Connection]. (Re- fer to page 3-8 for more details.) 2 In the ...

  • Konica Minolta BIZHUB 600 - page 257

    3 Specifying S ettings From the Control Pa nel 3-136 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 Authentication Specify whether to use au thentication for access from other systems that use OpenAPI. (Defaul t setting: OFF) 1 In the Administrator Setting screen , touch [9 System Connecti on]. (Re- fer to page 3-8 for more d ...

  • Konica Minolta BIZHUB 600 - page 258

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-137 Specifying Settings Fro m the Cont rol Panel Chapter 3 8 Enter the password (up to 8 char acters), and then touch [OK]. The user password is set. 9 Touch [OK]. The authentic ation function whe n OpenAPI is used i s set. 2 Note To cance l changes to the setting, touch [C ancel]. ! De ...

  • Konica Minolta BIZHUB 600 - page 259

    3 Specifying S ettings From the Control Pa nel 3-138 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3.36 External Server Authentication If performing user authentication using an external server, multiple settings are required depending on the type of server bei ng used. Specify the settings by using the following procedure a ...

  • Konica Minolta BIZHUB 600 - page 260

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-139 Specifying Settings Fro m the Cont rol Panel Chapter 3 ! Detail When “Active Direct ory” is selected under “Externa l Server Authentica- tion”, specify a password with one char acter or more. If a password is not specified, authenticati on will fail . Do not use “ ” ”a ...

  • Konica Minolta BIZHUB 600 - page 261

    3 Specifying S ettings From the Control Pa nel 3-140 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 3 In TCP/IP Setting screen 3/5 from the Net work Setting scre en, specify the following settings. Specify the DNS server that is connected to “Ac- tive Directory”. – Priority DNS Server – Substitute 1 DNS Server – Sub ...

  • Konica Minolta BIZHUB 600 - page 262

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-141 Specifying Settings Fro m the Cont rol Panel Chapter 3 6 In [Administrator Setting] — [User Authentication/Account Track] — [Authenticati on Method], specify the following settings. – Specify “On (Ex ternal Server)” in Us er Authentication . – Specify “Active Directory ...

  • Konica Minolta BIZHUB 600 - page 263

    3 Specifying S ettings From the Control Pa nel 3-142 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 7 In [Administrator Setting] — [1 System Setting] — [3 Date/Time Set- ting], specify the followin g settings. – Specify the current time and time zone. 2 Note To display the Administrator Setting sc reen, refer to “To d ...

  • Konica Minolta BIZHUB 600 - page 264

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-143 Specifying Settings Fro m the Cont rol Panel Chapter 3 Using Novell NDS Before specifying the settings, prepare the information described below. The settings can be specifi ed with Nove ll NDS Netware Server 4.0 or lat er. Administrator password (required) Default NDS tree name (req ...

  • Konica Minolta BIZHUB 600 - page 265

    3 Specifying S ettings From the Control Pa nel 3-144 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – Specify “NDS” in External Server Type. – Enter the NDS server tree name and contex t name. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3-8. ...

  • Konica Minolta BIZHUB 600 - page 266

    Specifying Settings From the Con trol Panel 3 bizhub 750/600 3-145 Specifying Settings Fro m the Cont rol Panel Chapter 3 Using NTLM v1/NTLM v2 Before specifying the se ttings, prepare the info rmation described below. Administrator password (required) Defaul t domain name (req uired) List of the users f or authentication (required) ! Detail Do not ...

  • Konica Minolta BIZHUB 600 - page 267

    3 Specifying S ettings From the Control Pa nel 3-146 bizhub 750/600 Specifying Settings Fro m the Cont rol Panel Chapter 3 – Specify “NTLM v1” or “NTLM v2 ” in External Server Type. – Enter the default domain name. 2 Note To display the Administrator Setting sc reen, refer to “To display the Ad- ministrator Setting screen” on page 3 ...

  • Konica Minolta BIZHUB 600 - page 268

    4 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Specifying Settings Using PageScope Web Connection ...

  • Konica Minolta BIZHUB 600 - page 269

    4 Specifying Settings Using PageScope Web Connection 4-2 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Specifying Settings Using PageScope Web Connection 4.1 Items That Can Be Spec ified Using PageScope Web Connection PageScope Web Connection is a device management utility supported by the HTTP server built into t ...

  • Konica Minolta BIZHUB 600 - page 270

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-3 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Administ rator Mode The following more advanced settings can be specified by the administrator. Item Descri ption System ta b User Authenti cation — User Regist ration Adds and registers new users. User Au thenti ...

  • Konica Minolta BIZHUB 600 - page 271

    4 Specifying Settings Using PageScope Web Connection 4-4 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Network tab TCP/IP Setting Sp ecifies TCP/IP settings. IP Filtering Sets the IP address filter funct ion. NetWare Setting Specifies NetWare settings. NetWare Status Used to check the NetWa re status. IPP Setting Sp ...

  • Konica Minolta BIZHUB 600 - page 272

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-5 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.2 Using PageScope Web Connection Operating Environment 2 Reminder Flash Player 8 or later is not supp orted by Windows NT 4.0 or Mac O S 8/ 9. If your computer is running one of these operating systems, download F ...

  • Konica Minolta BIZHUB 600 - page 273

    4 Specifying Settings Using PageScope Web Connection 4-6 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail Below is the URL after SSL/TLS is enabled. https://<IP_add ress_of_the_machine>/Re directed to “https://” even if “http://” is entered. 2 Note If user authen tication i s enabled, a page for ...

  • Konica Minolta BIZHUB 600 - page 274

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-7 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Page Structure The page that appears immediately aft er PageScope Web Connection is ac- cessed is called the User mode page. The configuration of the PageScope Web C onnection page is shown below. 1 2 3 11 56 10 8 1 ...

  • Konica Minolta BIZHUB 600 - page 275

    4 Specifying Settings Using PageScope Web Connection 4-8 bizhub 75 0/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail For each login method, refer to “Logging On and Logging Off” on page 4-10. 10 Tabs Sele ct the category of the page to be displayed. The fol - lowing tabs are displayed in User mode. • System •J o ...

  • Konica Minolta BIZHUB 600 - page 276

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-9 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Web Browser Cache The newest information ma y not appear in the Pa geScope Web Connection pages because older versions of page s are saved in the cache for the Web browser. In addition, the following pr oblems may o ...

  • Konica Minolta BIZHUB 600 - page 277

    4 Specifying Settings Using PageScope Web Connection 4-10 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.3 Logging On and Logging Off When PageScope Web Connec tion is accessed, the page for a public user appears. In order to log on as a register ed user or an administrator when user authentication is performed, it ...

  • Konica Minolta BIZHUB 600 - page 278

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-11 Specifying Setting s Using PageScope Web Conne ction Chapter 4 The user is logged off, an d the Login page appears. Logging O n to User Mode (Pub lic User) There are two procedures for logging on to User mode: one for a registered user and one for a public user. If user authen ...

  • Konica Minolta BIZHUB 600 - page 279

    4 Specifying Settings Using PageScope Web Connection 4-12 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Click [Login]. The User mode page appears. 2 Note If “Flash” is selected as the display format, the followin g will appear using the Flash fe ature. Flas h Player is required to u se the Flash feature. Status ...

  • Konica Minolta BIZHUB 600 - page 280

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-13 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Logging O n to User Mode (Reg istered User/B ox Administrator) There are two procedures for logging on to User mode: one for a registered user and one for a public user. The following procedure describes how to per ...

  • Konica Minolta BIZHUB 600 - page 281

    4 Specifying Settings Using PageScope Web Connection 4-14 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Click [Login]. The User mode page appears. 2 Note If “Prohibit Functions when Auth. Erro r” in Administrator mode is set to “Mode 2” and a user enters an incorrect password the specif ied number of times, ...

  • Konica Minolta BIZHUB 600 - page 282

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-15 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note When logged on to Administrator mode , the control panel of this machine is locked and c annot be used. Depending on the status of the mach ine, you may not be able to log on to Administrator mode. To log on ...

  • Konica Minolta BIZHUB 600 - page 283

    4 Specifying Settings Using PageScope Web Connection 4-16 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 The Administrator mode page appears. 2 Reminder If “Prohibit Functions when Auth. Erro r” in Administrator mode is set to “Mode 2” and an incorrect admini st rator password is entered the speci- fied number ...

  • Konica Minolta BIZHUB 600 - page 284

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-17 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.4 User Authentication (User Mode) Changing the User Password The setting can be specified when logge d in with user authentication. The password of the currently logged in user can b e changed. The settings that ...

  • Konica Minolta BIZHUB 600 - page 285

    4 Specifying Settings Using PageScope Web Connection 4-18 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking the User Regi stration Information The user information can be viewed when logged in with user authentication. The information of th e currently logged in user can be checked. 1 On the System tab, click [U ...

  • Konica Minolta BIZHUB 600 - page 286

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-19 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.5 Account Track (User Mode) You can che ck the accou nt information when performing a ccount track au- thentication. The information of the currently logged in account can be checked. To check the account track i ...

  • Konica Minolta BIZHUB 600 - page 287

    4 Specifying Settings Using PageScope Web Connection 4-20 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.6 Address Boo k Registering New Destinations New destinations can be registered for the scanning func tions. The Scan tab appears only when re gistrations by users are permitted. Registering New Address Books Cli ...

  • Konica Minolta BIZHUB 600 - page 288

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-21 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “SMB” is selected When “User Box” is selected ! Detail User boxes can be used only if the op tional hard disk drive is installed. Item Description Name Enter the name of the destination (up to 24 chara ...

  • Konica Minolta BIZHUB 600 - page 289

    4 Specifying Settings Using PageScope Web Connection 4-22 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 A setting edit page appears an d the settings can be chan ged. The items are the same as those used in registration. ...

  • Konica Minolta BIZHUB 600 - page 290

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-23 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register new destinations 1 Click [New Registration]. A page for selecting the tr ansmission mode appears. 2 Select the transmission mode and click [Nex t]. The registration page appears. 3 Enter t he sett ings, ...

  • Konica Minolta BIZHUB 600 - page 291

    4 Specifying Settings Using PageScope Web Connection 4-24 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Editing abbr eviated des tinations Click of the address you want to change. Deleting the Address Book 1 Click of the address you want to delete. A confirmation page appears. 2 To delete, click the [OK] bu tton. ...

  • Konica Minolta BIZHUB 600 - page 292

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-25 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.7 Group Destination Click the Scan tab, an d then click “Grou p”. Multiple destinations registered in th e abbreviated destination list ca n be registered as a group. To register gr oup destinations 1 Click [ ...

  • Konica Minolta BIZHUB 600 - page 293

    4 Specifying Settings Using PageScope Web Connection 4-26 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the Name. 4 For each tr ansmission mode, sele ct the destinations. – Click . – Select the desired desti nations to be registered to the group from the Abbreviated Destination List, and click [Apply]. ...

  • Konica Minolta BIZHUB 600 - page 294

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-27 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.8 Program Registration Click the Scan tab, and then click “Program”. The information to be entered is as follows: When “E -mail: Scan” is selecte d Item Description No. E nter the reg istrati on number. N ...

  • Konica Minolta BIZHUB 600 - page 295

    4 Specifying Settings Using PageScope Web Connection 4-28 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “FTP: Scan” is selected Neg-/Positive Rev erse Select whet her or not the black and whit e areas of the docume nt are reversed in the scan. Non-Image Area Erase Select whether or not the shadows alon g the ...

  • Konica Minolta BIZHUB 600 - page 296

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-29 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “SMB: Scan” is selecte d Booklet Pagination Select wh ether or not to enable pa ge scanning. If “ON” is selecte d, the binding position is specified. Erase Specify the width of the perimeter of th e do ...

  • Konica Minolta BIZHUB 600 - page 297

    4 Specifying Settings Using PageScope Web Connection 4-30 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 File Name Enter the file na me (up to 30 ch aracters). Original Direction Sel ect the orientation of the original do cument. Bind Select t he original binding po sition. Special O riginal Selec t whether the docume ...

  • Konica Minolta BIZHUB 600 - page 298

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-31 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “User Box: Scan” is sele cted Item Description No. Enter the registrati on number. Name Enter the re gistration name (up t o 24 charac ters). Select from Address Book Enter the destination e-mail address d ...

  • Konica Minolta BIZHUB 600 - page 299

    4 Specifying Settings Using PageScope Web Connection 4-32 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “Group: Scan” is selected Neg-/Positive Rev erse Select whether or not the black and w hite areas of the document ar e reversed in the scan. Non-Image Area Eras e Select whet her or not t he shadows along ...

  • Konica Minolta BIZHUB 600 - page 300

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-33 Specifying Setting s Using PageScope Web Conne ction Chapter 4 When “No Destination (Store Scanner)” is selected Booklet Pagina tion Select whether or not to ena ble page scanning. If “ON” is selected, the binding position is specified. Erase Specify the wi dth of the ...

  • Konica Minolta BIZHUB 600 - page 301

    4 Specifying Settings Using PageScope Web Connection 4-34 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Multiple destinations registered in th e abbreviated destination list can be registered as a program. Book Scanning Select whether or not to enable book sc anning. If “ON” is selected, th e scanning method a nd ...

  • Konica Minolta BIZHUB 600 - page 302

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-35 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register new destinations 1 Click [New Registration]. A page for selecting the tr ansmission mode appears. 2 Select the transmission mode and click [Nex t]. The registration page appears. ...

  • Konica Minolta BIZHUB 600 - page 303

    4 Specifying Settings Using PageScope Web Connection 4-36 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the settings, and click [Apply]. ...

  • Konica Minolta BIZHUB 600 - page 304

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-37 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.9 Temporary One-Tou ch Registration Click the Scan tab, and then click “Temporary One-Touch”. Temporary destinations can be registered. To regist er tempor ary destinat ions 1 Click [New Registration]. A page ...

  • Konica Minolta BIZHUB 600 - page 305

    4 Specifying Settings Using PageScope Web Connection 4-38 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Enter the settings, and click [Apply]. The details of the settings are the sa me as those for program registra- tions. For details, see “Program Registration” on page 4-27. 2 Note To specifying a registered t ...

  • Konica Minolta BIZHUB 600 - page 306

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-39 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.10 Subject Registration Click the Scan tab, and then click “Subject”. Up to 10 subjects that can be used wh en sending e-mail can be registered. ...

  • Konica Minolta BIZHUB 600 - page 307

    4 Specifying Settings Using PageScope Web Connection 4-40 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register the subject When sending e-mail wi th a fixed subject 0 Click “E-Mail Default” to select it. 1 Click beside the subject to be registered or edited. The registration page appears. 2 Enter the subject ...

  • Konica Minolta BIZHUB 600 - page 308

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-41 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.11 Text Registration Click the Scan tab, an d then click “Text”. Up to 10 text messages that can be used when sending e-mail can be reg- istered. ...

  • Konica Minolta BIZHUB 600 - page 309

    4 Specifying Settings Using PageScope Web Connection 4-42 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To regi ster text When sending e -mail with a fixed text messa ge 0 Click “E-Mail Default” to select it. 1 Click beside the text to be registered or edited. The registration page appears. 2 Enter the text, an d ...

  • Konica Minolta BIZHUB 600 - page 310

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-43 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.12 Administrator Mode In Administrator mode, you can perfo rm system configuration of the ma- chine. Six tabs (System, Job, Box, Print, Scan and Net work) are available. For the procedure to log on to Adm inistra ...

  • Konica Minolta BIZHUB 600 - page 311

    4 Specifying Settings Using PageScope Web Connection 4-44 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.13 Time Adjustment Setting Select whether the date an d time of the machine can be adjusted through ac - quisition from the NTP server. To adjust the time 1 On the System tab, click [Date/Time]. 2 Click [Time Adj ...

  • Konica Minolta BIZHUB 600 - page 312

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-45 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.14 User Authentication (Administrator Mode) User Registrat ion You can specify the setting w hen performing u ser authentic ation. Register the users tha t can log in. The settings that can be sp ecified are desc ...

  • Konica Minolta BIZHUB 600 - page 313

    4 Specifying Settings Using PageScope Web Connection 4-46 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register a user 1 On the System tab, click [User Authenticati on]. 2 Click the [New Regist ration] button. ...

  • Konica Minolta BIZHUB 600 - page 314

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-47 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Specify the required settings. 4 Click the [Apply] button. 5 Click the [OK] button. ...

  • Konica Minolta BIZHUB 600 - page 315

    4 Specifying Settings Using PageScope Web Connection 4-48 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking or Changing the Re gistered User Information You can check or change the registered user inf ormation. The following set- tings can be specified. Item Description No. Displays the user registra tion number ...

  • Konica Minolta BIZHUB 600 - page 316

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-49 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To check or change the regi stered user information 1 On the System tab, click [User Authentication ]. 2 Click in the user list for the user you want to check. ...

  • Konica Minolta BIZHUB 600 - page 317

    4 Specifying Settings Using PageScope Web Connection 4-50 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Check the regist ration informati on and change i t as necessary. 4 Click the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 318

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-51 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To delete a registered user 1 On the System tab, click [User Authentication ]. 2 Click in the user list for the user you want to delete. 3 Check the message, and then click the [OK] button. ...

  • Konica Minolta BIZHUB 600 - page 319

    4 Specifying Settings Using PageScope Web Connection 4-52 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Default Function Permission You can specify the permissions for the op erating functions for a ll registered users. The settings that can be sp ecified are described below. To specify the default function permissio ...

  • Konica Minolta BIZHUB 600 - page 320

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-53 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.15 Account Track Registration (Administrator Mode) Account Track Registration You can specify the setti ngs when performing account track authentication . Register the accou nt that can log in. The settings that ...

  • Konica Minolta BIZHUB 600 - page 321

    4 Specifying Settings Using PageScope Web Connection 4-54 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To register an account 1 On the System tab, click [A ccount Track Registration]. 2 Click the [New Regist ration] button. 3 Specify the desired settin gs. ...

  • Konica Minolta BIZHUB 600 - page 322

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-55 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Click the [Apply] button. 5 Click the [OK] button. ...

  • Konica Minolta BIZHUB 600 - page 323

    4 Specifying Settings Using PageScope Web Connection 4-56 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Checking or Changing the Regi stered Account Information The settings that can be chec ke d or changed are described below. To check or change the regi stered account information 1 On the System tab, click [User Au ...

  • Konica Minolta BIZHUB 600 - page 324

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-57 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Check the registra tion information and chan ge it as necessary. 4 Click the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 325

    4 Specifying Settings Using PageScope Web Connection 4-58 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To delete registered accounts 1 On the System tab, click [User Authenticati on]. 2 Click in the account list for th e account you want to delete. 3 Check the message, and then click the [OK] button. ...

  • Konica Minolta BIZHUB 600 - page 326

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-59 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.16 Administrator Password The administrator password can be changed. ! Detail If the enhanced security mode wa s enabled, [Administrator Password] does not appear in the menu. To change the administrator password ...

  • Konica Minolta BIZHUB 600 - page 327

    4 Specifying Settings Using PageScope Web Connection 4-60 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.17 Prefix/Suffix The prefix and suf fix that are provided as destination inf ormation when send- ing e-mail can be registered. If address book regis tration by users is disa- bled, the address book regi str ation ...

  • Konica Minolta BIZHUB 600 - page 328

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-61 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ...

  • Konica Minolta BIZHUB 600 - page 329

    4 Specifying Settings Using PageScope Web Connection 4-62 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.18 Import/Export Used to import address book data fr om the computer or export the ma- chine’s address book. Importing % Click [Browse...], select the address book data to be imported, and click [Import]. Expor ...

  • Konica Minolta BIZHUB 600 - page 330

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-63 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.19 Other Specify address book r estrictions. Item Description Prohibit User Operation Specify whether to permit destin ation registrat ion by users. ...

  • Konica Minolta BIZHUB 600 - page 331

    4 Specifying Settings Using PageScope Web Connection 4-64 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.20 TCP/IP 2 Reminder To activate all network se tting ch anges, turn the main power off and then back on. When turning the main power switch OFF then ON, wait for 10 seconds or longer before t urning it ON aga in ...

  • Konica Minolta BIZHUB 600 - page 332

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-65 Specifying Setting s Using PageScope Web Conne ction Chapter 4 TCP/IP Specify TCP/IP settings. ...

  • Konica Minolta BIZHUB 600 - page 333

    4 Specifying Settings Using PageScope Web Connection 4-66 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Item Description TCP/IP Enables/disables TCP/IP. Network S peed Specify the transmission spe ed. IP Address Setting Method Select the IP addre ss setting method. IP Address Specify the machine’s IP address (synta ...

  • Konica Minolta BIZHUB 600 - page 334

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-67 Specifying Setting s Using PageScope Web Conne ction Chapter 4 IP Address Filtering Specify the IP address filter function. Access restrictions can be applied by specifying the host IP address. Item Description Permit Access Ena bles/disables the acc ess permission address set ...

  • Konica Minolta BIZHUB 600 - page 335

    4 Specifying Settings Using PageScope Web Connection 4-68 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.21 NetWare Specify NetWare settings. Item Description IPX Setting Spec ify whether to enable the I PX setting. Ethernet Frame Type Select the fr ame type. NetWare Print Mode Specify th e print server operation mo ...

  • Konica Minolta BIZHUB 600 - page 336

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-69 Specifying Setting s Using PageScope Web Conne ction Chapter 4 NetWare Status The NetWare server and que ue names can be displayed to show the Net- Ware connection stat us. NDS Context Name Enter the NDS context name ( up to 191 characters ex cluding / : ; , * [ ] < > ...

  • Konica Minolta BIZHUB 600 - page 337

    4 Specifying Settings Using PageScope Web Connection 4-70 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.22 IPP Specify the IPP print settings. ...

  • Konica Minolta BIZHUB 600 - page 338

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-71 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Item Description IPP Setting Specify whether to enable the IPP print func tion. Printer Name Enter the prin ter name (up t o 127 alpha numeric ch aracters, hyphen, and underscore). Printer Location En ter the print ...

  • Konica Minolta BIZHUB 600 - page 339

    4 Specifying Settings Using PageScope Web Connection 4-72 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.23 FTP FTP TX Specify client settings such as the FTP proxy server. Item Description FTP TX Specify whethe r to use this machine as an FTP server. Proxy Server Address Enter the proxy serv er address (syntax: “ ...

  • Konica Minolta BIZHUB 600 - page 340

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-73 Specifying Setting s Using PageScope Web Conne ction Chapter 4 FTP Server Specify FTP server settings. Item Description FTP Server Specify the FTP server sett ing to “ON” or “OFF”. ...

  • Konica Minolta BIZHUB 600 - page 341

    4 Specifying Settings Using PageScope Web Connection 4-74 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.24 SNMP Specify SNMP settings. Item Description SNMP Specify whether to use SNMP. Also, se lect the SNMP type to be used from the list of items. SNMPv1/v2c (IP) SNMPv3 (IP) SNMPv1 (IPX) UDP Port Setting Enter the ...

  • Konica Minolta BIZHUB 600 - page 342

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-75 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.25 SMB WINS Setting You can specify SMB WINS settings. 2 Note When performing SMB scans (host name setting) via a router, specify the WINS settings according to the SMB tr ansmission settings in [SMB Set- ting] - ...

  • Konica Minolta BIZHUB 600 - page 343

    4 Specifying Settings Using PageScope Web Connection 4-76 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Client Setting Specify SMB scan settings. 2 Note To use the SMB (NTLM ) of the externa l server authenticat ion, [Scan Set- ting] or [Print Sett ing] must be turned ON. 2 Note NTLMv2 is available from Windows NT 4. ...

  • Konica Minolta BIZHUB 600 - page 344

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-77 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Print Setting Specify SMB print settings. Item Description SMB Print Specify wheth er to use th e SM B printing (Windo ws printing) service. NetBIOS Name Enter the NetBIOS name (up to 15 characters). Print Service ...

  • Konica Minolta BIZHUB 600 - page 345

    4 Specifying Settings Using PageScope Web Connection 4-78 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.26 AppleTalk Specify AppleTal k settings. Item Description AppleTalk Specify whether to use AppleTalk. Printer Nam e Enter th e print name (u p to 31 character s excluding = ~). Zone Name Enter the zone name (up ...

  • Konica Minolta BIZHUB 600 - page 346

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-79 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.27 Bonjour Setting You can specify th e Bonjour settings. Item Description Bonjour Specify whether to use the Bonjour setting . Bonjour Name Specify the device name that is used wit h Bonjour (up to 63 characters ...

  • Konica Minolta BIZHUB 600 - page 347

    4 Specifying Settings Using PageScope Web Connection 4-80 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.28 LDAP Setting LDAP Setting Specify whether to use the LDAP setting. ...

  • Konica Minolta BIZHUB 600 - page 348

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-81 Specifying Setting s Using PageScope Web Conne ction Chapter 4 LDAP Server Registration 1 On the Ne twork ta b, click [LDA P Setti ng]. 2 Click [LDAP Server Registration]. 3 Click of the server to be registered. – You can specify 5 LDAP servers. ...

  • Konica Minolta BIZHUB 600 - page 349

    4 Specifying Settings Using PageScope Web Connection 4-82 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4 Specify the desired settin gs. ! Detail The setting that must be specified va ry depending on the authentication method. If “anonymous” is selected, settings for “Domain Name”, “Login Name”, and “Pa ...

  • Konica Minolta BIZHUB 600 - page 350

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-83 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note Be sure to use an authentication meth od like the one that is used by the LDAP server. For details, refer to th e manual of the LDAP server being used. If the auth entication meth od is specified as “GSS-S ...

  • Konica Minolta BIZHUB 600 - page 351

    4 Specifying Settings Using PageScope Web Connection 4-84 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.29 E-Mail Setting E-Mail RX ( POP) You can specify the settings to perf orm the authentication of the e-mail sender with POP Before SMTP. Item Description E-Mail RX Setting Specify whether to use the e-m ail rece ...

  • Konica Minolta BIZHUB 600 - page 352

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-85 Specifying Setting s Using PageScope Web Conne ction Chapter 4 2 Note If selecting [Please check to ente r host name.], check that the D NS set- tings are specified correctly before maki ng the selection. For de tails, refer to “TCP/IP” on page 4-64. Auto Receiv e Check A ...

  • Konica Minolta BIZHUB 600 - page 353

    4 Specifying Settings Using PageScope Web Connection 4-86 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 E-Mail TX (SMTP) Specify e-mail send settings. Item Description E-Mail TX Setting Specify whether to use the e- mail transmission setting. Scan to E-Mail Specify whether to use Scan to E-Mail. E-Mail Notificat ion ...

  • Konica Minolta BIZHUB 600 - page 354

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-87 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail If running an antivirus progra m on th e e-mail server, the binary div ision function may not be able to be used. For det ails, ask the network admin- istrator. To receive binary e-mails, an e-mail client ...

  • Konica Minolta BIZHUB 600 - page 355

    4 Specifying Settings Using PageScope Web Connection 4-88 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ! Detail To perform user authentication with POP Before SMTP, the setti ngs that will allow POP to access the e-mail server must be specifie d. For details, refer to “E-Mail RX (POP)” on page 4-84. ...

  • Konica Minolta BIZHUB 600 - page 356

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-89 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.30 SSL/TLS Specify SSL/TLS settings . When SSL/TLS is enabled, the commun ication between the mac hine and the client co mputer is encrypted to pr event infor- mation leakage such a s passwords and transmitted da ...

  • Konica Minolta BIZHUB 600 - page 357

    4 Specifying Settings Using PageScope Web Connection 4-90 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 If you create a sel f-signed certificat e or obtain and instal l a certificat e from a Certificate Authority, SSL/TLS is enabled. Click [Setting] to change certificate inform ation, delete certificates, or create n ...

  • Konica Minolta BIZHUB 600 - page 358

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-91 Specifying Setting s Using PageScope Web Conne ction Chapter 4 SSL/TLS Setting If “Create a self-signed Ce rtificat e” is select ed, settings f or the foll owing need to be entered. To create your own certificat e, select “Create a self-signe d Certificate”. If “Requ ...

  • Konica Minolta BIZHUB 600 - page 359

    4 Specifying Settings Using PageScope Web Connection 4-92 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To create a certificate 1 Click [Setting]. A page for selecting the function appears. 2 Select “Create a sel f-signed Certifi cate” or “Request a Certif icate”, and then click [Next]. The registration page ...

  • Konica Minolta BIZHUB 600 - page 360

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-93 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Specify the desired settings. Example for Create a Self- signed a Certificat e 4 Click [Apply] or [Next]. A certificate can be regis tered or obtained. – If a request was made for a ce rtificate, proceed to ste ...

  • Konica Minolta BIZHUB 600 - page 361

    4 Specifying Settings Using PageScope Web Connection 4-94 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 SSL/TLS Setting — Install a Certificate Install the certif icate issued by the Certificat e Authority. 1 Click [Setting]. A page for selecting the function appears. 2 Select “Install a Certific ate”, and then ...

  • Konica Minolta BIZHUB 600 - page 362

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-95 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Set an Encryption Strength 1 In the SSL/TLS page, select “Set an En cryption Strength”, and then click the [Next] button. 2 Select the encrypt ion strength, and then clic k the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 363

    4 Specifying Settings Using PageScope Web Connection 4-96 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Remove a Certificate 1 In the SSL/TLS page, select “Re move a Certificate”, and then clic k the [Next] b utton. 2 Check the message, and then click the [OK] button. ...

  • Konica Minolta BIZHUB 600 - page 364

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-97 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Set Mode using SSL Select the mode using SSL. 1 In the SSL/TLS page , select “Set Mode us ing SSL”, and then click the [Next] button. 2 Select the mode using SSL, and then click the [Apply] button . ...

  • Konica Minolta BIZHUB 600 - page 365

    4 Specifying Settings Using PageScope Web Connection 4-98 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Processing Mode When this machine is to be connected t o an SSL se rver as a c lient, you ca n specify the operation meth od when the validation of the SSL server certifi- cate has expired. 2 Note The functions tha ...

  • Konica Minolta BIZHUB 600 - page 366

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-99 Specifying Setting s Using PageScope Web Conne ction Chapter 4 3 Select the processin g method, and then click the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 367

    4 Specifying Settings Using PageScope Web Connection 4-100 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.31 Authentication User Authentication/Account Track The settings that can be sp ecified are described below. Item Description User Authen tication Sele ct “OFF”, “ON (External Ser ver)”, or “ON (MF P)? ...

  • Konica Minolta BIZHUB 600 - page 368

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-101 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To specify the user authenti cation and account track settings 1 On the Networ k tab, c lick [Authentication]. 2 Enter the required settings. 3 Click the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 369

    4 Specifying Settings Using PageScope Web Connection 4-102 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 Auto Logout Specify auto logout settings for Administrator mode and User mode. If no operation is performed within th e specified time, the administrator or user is automatically logged out. Item Description Admin ...

  • Konica Minolta BIZHUB 600 - page 370

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-103 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.32 OpenA PI Specify OpenAPI. 2 Reminder The setting of [Use SSL/TLS] and [Por t No. (SSL/TLS)] is available only when the SSL/TLS setting is valid. Item Description Port No. Enter the port number (input range: 1 ...

  • Konica Minolta BIZHUB 600 - page 371

    4 Specifying Settings Using PageScope Web Connection 4-104 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 4.33 TCP Socket Setting You can specify TCP socket settings. The settings that can be sp ecified are described below. 2 Reminder When changing the TCP socket settings, be sure to turn the power of this machine off ...

  • Konica Minolta BIZHUB 600 - page 372

    Specifying Settings Using PageScope Web Connection 4 bizhub 750/600 4-105 Specifying Setting s Using PageScope Web Conne ction Chapter 4 To specify the TCP socket settings 1 On the Networ k tab, clic k [TCP Socket Setting]. 2 Enter the required settings. 3 Click the [Apply] button. ...

  • Konica Minolta BIZHUB 600 - page 373

    4 Specifying Settings Using PageScope Web Connection 4-106 bizhub 750/600 Specifying Setting s Using PageScope Web Conne ction Chapter 4 ...

  • Konica Minolta BIZHUB 600 - page 374

    5 Scan Function Troublesh ooting Chapter 5 Scan Function Troubleshooting ...

  • Konica Minolta BIZHUB 600 - page 375

    5 Scan Function Troubleshooting 5-2 bizhub 75 0/600 Scan Function Troublesh ooting Chapter 5 5 Scan Function Troubleshooting 5.1 Error List If an error message appears, take action as described below. Message Cau se a nd Re medy Cannot connect to the network. A connection to th e network co uld not be established. Ch eck if the network cable is cor ...

  • Konica Minolta BIZHUB 600 - page 376

    6 Appendix Chapte r 6 Appendix ...

  • Konica Minolta BIZHUB 600 - page 377

    6 Appendix 6-2 bizhub 75 0/600 Appendix Chapte r 6 6 Appendix 6.1 Product Specifications Scanning Functions Item Specifications Scan Sp eed Same as the copier Scanna ble Range S ame as the co pier (11 × 17 maximum) Functions Scan to E-Mail Scan to FTP Scan to SMB Save in U ser BOX Scanner Reso lution 200/300/400/600 dpi Scannable Paper Size 11 × ...

  • Konica Minolta BIZHUB 600 - page 378

    Appendix 6 bizhub 750/600 6-3 Appendix Chapte r 6 Network Function * If you set the search condition to “OR” or “END” when using the Lotus Domino Server, it will not work properly. Item Specifications Type Embedded Frame Type IEEE802.2/802.3/Etherne t II/IEEE802.3SNAP Cable Type 10Base-T/100Base- TX Connector RJ-45 Support ed Protocols TCP/ ...

  • Konica Minolta BIZHUB 600 - page 379

    6 Appendix 6-4 bizhub 75 0/600 Appendix Chapte r 6 Important In order to incorporate improvements, these product specificat ions are sub- ject to change without notice. Status Indicat ors 10/100Base-T UTP Cable Specific ations - General Ethernet standa rds apply when connecting a 10/100Base- T UTP cable to an RJ-45 connec tor on the network. Use ca ...

  • Konica Minolta BIZHUB 600 - page 380

    Appendix 6 bizhub 750/600 6-5 Appendix Chapte r 6 6.2 Entering text The following procedure describes how to use the keyboard that a ppears in the touch panel fo r typing in the names of registered accounts and custom paper sizes. The keypad can als o be used to type in numbers. Any of the following keyboards may appear. Example Password input scre ...

  • Konica Minolta BIZHUB 600 - page 381

    6 Appendix 6-6 bizhub 75 0/600 Appendix Chapte r 6 ...

  • Konica Minolta BIZHUB 600 - page 382

    Appendix 6 bizhub 750/600 6-7 Appendix Chapte r 6 To type text % Touch the button for th e desired character from the keyboard that ap- peared. – To type in uppercase letters or sy mbols, touch [Shift]. – Numbers can also be ty ped in with the keypad. The entered c haracters a ppear in the text box. 2 Note To cancel change s to the settings, to ...

  • Konica Minolta BIZHUB 600 - page 383

    6 Appendix 6-8 bizhub 75 0/600 Appendix Chapte r 6 6.3 Glossar y Term Definition 10Base-T/100Ba se-TX/ 1000Base-T An Ethernet standar d, which is a cable cons isting of twisted coppe r wire pairs. The transmis sion speed of 10Base-T is 10 Mb ps, of 100Base-TX is 100 Mbps, and of 10 00Base-T is 1000 Mbps. Active Directory A service that manages a ll ...

  • Konica Minolta BIZHUB 600 - page 384

    Appendix 6 bizhub 750/600 6-9 Appendix Chapte r 6 Default Th e initial settings. The set tings first select ed when the machin e is turned on, or the setting s first specified when the functi on is select- ed. Default Gatew ay A device, such as a com puter or router, used as a “gateway ” to ac- cess comput ers not on the same LAN. Density An in ...

  • Konica Minolta BIZHUB 600 - page 385

    6 Appendix 6-10 bizhub 750/600 Appendix Chapte r 6 HTTP Abbreviation for Hype rText Transfer Protocol. A pro tocol used t o send and receive dat a between a Web serv er and a client (Web browser). Doc uments contai ning images, recordin gs, and video clips can be ex changed wit h the expre ssive form informat ion. ICM Abbreviation fo r Image Color ...

  • Konica Minolta BIZHUB 600 - page 386

    Appendix 6 bizhub 750/600 6-11 Appendix Chapte r 6 LPD Abbreviation for Line Printer Daemon. A printer prot ocol that uses TCP/IP and is platf orm-independe nt. Originally developed for BSD UNIX, it has become the standard pr inting protocol and can be used with any gener al computer. LPR/LPD Abbreviation for Line Printer Request/L ine Printer Daem ...

  • Konica Minolta BIZHUB 600 - page 387

    6 Appendix 6-12 bizhub 750/600 Appendix Chapte r 6 PASV Abbreviation for PASsiVe. A m ode for connecti ng to an FTP server from within a firewall. If this mode is not specified, the firewall will be considered inaccessible and the connection will be terminated, pre- venting the file fr om being sent. Peer-to-pe er A network format tha t allows conn ...

  • Konica Minolta BIZHUB 600 - page 388

    Appendix 6 bizhub 750/600 6-13 Appendix Chapte r 6 Scanning With the scanning operation of the scanner , an image is read while the row of image sen sors is gradua lly moved. The dire ction that the image sensors are moved is called the main scanning directi on, and the direction in which the image se nsors are ar ranged is ca lled the sub-scanning ...

  • Konica Minolta BIZHUB 600 - page 389

    6 Appendix 6-14 bizhub 750/600 Appendix Chapte r 6 6.4 Ind ex A Abbreviated destinations ...... ......... 3-10 Access setting ........ ........ ............ . 3-133 Account track informati on ....... ...... 4-19 Account track registrati on ....... ...... 4-53 Action for Invalid Certif icate ........ 3 -121 Address book ...... 2-12 , 2-2 4 , 2-36 , ...

  • Konica Minolta BIZHUB 600 - page 390

    Appendix 6 bizhub 750/600 6-15 Appendix Chapte r 6 Frame erase ............. ......... ........... .. 2-65 FTP destination registration .... ....... 3-12 FTP server settings ........ ......... ....... 4-73 FTP settings ............. ......... ... 3-66 , 4-73 Full scan .............. ........... ......... ....... 2-64 G Group ....... ........ ...... ...

  • Konica Minolta BIZHUB 600 - page 391

    6 Appendix 6-16 bizhub 750/600 Appendix Chapte r 6 Public user ........ ............ ........ ......... 4-11 R RAW port number ...... ........... ......... 3-53 Registered user ... ........... ......... ...... 4-13 Registering box destinations ......... 3-20 Registering destinations ........ 1-7 , 3-1 0 Registering e-mail destinations ..... 3-10 Re ...

  • Konica Minolta BIZHUB 600 - page 392

    Appendix 6 bizhub 750/600 6-17 Appendix Chapte r 6 User mode settings via PageScope Web Connection ............ ......... ......... 4 -2 User setting screen ........ ......... ......... 3 -7 User’s guide con ventions ............ .. x-19 User’s guides .............. ............ ....... x -20 W Warning explanation ......... ........... .. x-19 ...

  • Konica Minolta BIZHUB 600 - page 393

    6 Appendix 6-18 bizhub 750/600 Appendix Chapte r 6 ...

  • Konica Minolta BIZHUB 600 - page 394

    C opyri g h t 2007 Printed in C hin a 200 7. 1 5 7AE97363H htt p ://konicaminolta.com ● This manual was printed usin g 100 % post-consumer recycled paper. ...

Manufacturer Konica Minolta Category Scanner

Documents that we receive from a manufacturer of a Konica Minolta BIZHUB 600 can be divided into several groups. They are, among others:
- Konica Minolta technical drawings
- BIZHUB 600 manuals
- Konica Minolta product data sheets
- information booklets
- or energy labels Konica Minolta BIZHUB 600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Konica Minolta BIZHUB 600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Konica Minolta BIZHUB 600, service manual, brief instructions and user manuals Konica Minolta BIZHUB 600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Konica Minolta BIZHUB 600.

Similar manuals

A complete manual for the device Konica Minolta BIZHUB 600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Konica Minolta BIZHUB 600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Konica Minolta BIZHUB 600.

A complete Konica Minolta manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Konica Minolta BIZHUB 600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Konica Minolta BIZHUB 600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Konica Minolta BIZHUB 600, that we can find in the current document
3. Tips how to use the basic functions of the device Konica Minolta BIZHUB 600 - which should help us in our first steps of using Konica Minolta BIZHUB 600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Konica Minolta BIZHUB 600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Konica Minolta BIZHUB 600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Konica Minolta BIZHUB 600?

Use the form below

If you did not solve your problem by using a manual Konica Minolta BIZHUB 600, ask a question using the form below. If a user had a similar problem with Konica Minolta BIZHUB 600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)