English dropdown-ico

Manual Henny Penny 520

15 pages 2.01 mb
Download

Go to site of 15

Summary
  • Henny Penny 520 - page 1

    Y et 52 ...

  • Henny Penny 520 - page 2

    Henny Penny Model 520 SECTION 3. OPERA TION 3-1. OPERA TING CONTROLS Item Description Function 1 Main Power Switch A three way rocker switch with a center off position. Pressing with Built- In Indicator the left side of the rocker switch (COOK position) operates the Lights fryer , and the amber light illuminates. No light is visible when the switch ...

  • Henny Penny 520 - page 3

    Henny Penny Model 520 Item Description Function 7 Safety Relief V alve The safety relief valve is set at 14.5 PSI (99.9 KPa). In the event that the dead weight valve becomes clogged, the safety valve releases excessive pressure, keeping the frypot at a maximum of 14.5 PSI (99.9 KPa). If this occurs, turn the main power switch to the OFF position to ...

  • Henny Penny 520 - page 4

    el 520 ke 15 High Temperature Control Lid/Locking Assembly Condensate Drain Pan Fun~tio~ The high temperature thermostat is a manual reset control which senses the temperature of the shortening. If the shorten- ing temperature exceeds the safe operating limit, this control will remove power from the contactors, thus removing heat to the cook pot. W ...

  • Henny Penny 520 - page 5

    Henny Penny Model 520 Item 6 Item 7 Item 9 Item 10 Item 1 1 Item 12 Item 9 3-4 101 ...

  • Henny Penny 520 - page 6

    The first step in the use of the Henny Penny Model 520 is to learn the controls. Next, determine the time and temperature settings. The following will assist you in determining these settings but are approximate and will vary with the size and quantity of the raw product. Chicken - 9 piece fresh; 1 head, 2 l/2 - 2 3/4 lbs. (1.13 kg - 1.24 kg) 1 hea ...

  • Henny Penny 520 - page 7

    del 52 The following procedures should be followed in the initial start-up of the fryer and each time the fryer is brought from a cold or shut down condition back into operation. 1. Check to see that all control switches are turned OFF. 2. Be sure that the drain valve and filter valve are closed. 3. Remove the wire basket from the cook pot and leav ...

  • Henny Penny 520 - page 8

    el 520 Step 3 3-5. COOKING Gloves should be worn and care must be taken when pouring hot shortening into the unit. Severe burns could result. Also, when adding fresh shortening to existing shortening, care must be taken to avoid splashing. 3. Cold shortening should be filled approximately 112 inch below the bottom level of the level indicator line. ...

  • Henny Penny 520 - page 9

    Henny Penny Model 520 3-5. COOKING PROCEDURES 8. Raise the lid promptly to allow most of the condensation (Continued) on the lid to drain down and out through the drain channel. Do not let the lid slam up against the back stop. This could damage the hinge assembly . This will also allow condensation to drop back into the shortening. NOTE : The cond ...

  • Henny Penny 520 - page 10

    el 520 The filter pan must be in the proper position beneath the drain valve. This will prevent the splashing of the hot shortening as it drains into the filter drain pan which would cause burns. 3. Open the drain valve by pulling it forward slowly. This will prevent excessive splashing of the hot shortening as it drains into the filter drain pan. ...

  • Henny Penny 520 - page 11

    3-6. FILTERING THE S TENING (Co~ti GING T F~LTE ENVELOPE el 520 D. Wash down and scrub the sides of the cook pot. Use “L” brush to clean the heating elements. E . After the sides and bottom are cleaned, open the drain valve. 7. Pump all the shortening out of the filter pan and back into the cook pot. Close the lid during the first surge of pump ...

  • Henny Penny 520 - page 12

    FILTE ti~~e~) This union will be hot. Use protective glove or cloth to prevent burns. 4. Lift the screen assembly from the drain pan. Step 3 5. Wipe the shortening and crumbs from the drain pan. Clean the drain pan with soap and water. Thoroughly rinse with hot water. 6. Unthread the suction standpipe from the screen assembly. Step 6 7. Remove the ...

  • Henny Penny 520 - page 13

    ENVELOPE (Co~ti~~ed) Step 8 Step 10 tep 11 tep 12 8. Remove filter clips and discard the filter envelope. 9. Clean the top and bottom filter screen with soap and water. Rinse thoroughly with hot water. Be sure that the filter screens, crumb catcher, filter clips, and the suction standpipe are thoroughly dry before assembly of filter envelope, as wa ...

  • Henny Penny 520 - page 14

    Henny Penny Model 520 3-8. CLEANING THE FR YPOT T aste the cold shortening every day for flavor . W atch the shortening for foaming during the cook cycle. Discard the shortening as soon as it shows signs of foaming. Drain and clean the frypot as follows: 1. Turn the power switch to OFF . Place the filter drain pan under the drain valve to prevent s ...

  • Henny Penny 520 - page 15

    Henny Penny Model 520 3-8. CLEANING THE FR YPOT 6. When the set temperature is reached, turn unit off. (Continued) W atch cleaning solution constantly to make sure it does NOT boil over causing damage to controls. If the cleaning solution starts to foam and boil over , DO NOT CLOSE THE FR YER LID, severe burns could result. 7. Let the cleaning solu ...

Manufacturer Henny Penny Category Electric Pressure Cooker

Documents that we receive from a manufacturer of a Henny Penny 520 can be divided into several groups. They are, among others:
- Henny Penny technical drawings
- 520 manuals
- Henny Penny product data sheets
- information booklets
- or energy labels Henny Penny 520
All of them are important, but the most important information from the point of view of use of the device are in the user manual Henny Penny 520.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Henny Penny 520, service manual, brief instructions and user manuals Henny Penny 520. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Henny Penny 520.

Similar manuals

A complete manual for the device Henny Penny 520, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Henny Penny 520 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Henny Penny 520.

A complete Henny Penny manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Henny Penny 520 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Henny Penny 520, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Henny Penny 520, that we can find in the current document
3. Tips how to use the basic functions of the device Henny Penny 520 - which should help us in our first steps of using Henny Penny 520
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Henny Penny 520
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Henny Penny 520 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Henny Penny 520?

Use the form below

If you did not solve your problem by using a manual Henny Penny 520, ask a question using the form below. If a user had a similar problem with Henny Penny 520 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)