English dropdown-ico

Manual Nissin Di866

11 pages 5.14 mb
Download

Go to site of 11

Summary
  • Nissin Di866 - page 1

    INSTRUCTION MANUAL DIG IT AL T TL PO WER ZO OM FLA SH Please refer Nissin’s compatibility chart shown in its home page for details. http://www .nissin-japan.com or http://www.nissindigital.com SIMPLE OPERA TION When attaching Di866 to the camera, the basic flash exposure operation is fully controlled by the camera. It is the same idea as you use ...

  • Nissin Di866 - page 2

    Di866 Flash Mode and Functions - to be set on the flash unit. Advanced functions are provided in some operation modes – to be set on the flash unit Functions by Camera setting – The flash is automatically controlled by the camera This safety instructions refer important information to use the product safely and properly . Please read the follow ...

  • Nissin Di866 - page 3

    x 4 NOTE BASIC OPERA TION SETTING THE MODE AND THE FUNCTION Remove the battery magazine and insert 4 x size AA batteries as shown in the picture. Press the on/off switch. Screen A appears, and the mode A is set. The pilot lamp blinks red showing the unit is charging. In a few seconds, the pilot lamp turns green. The display screen automatically tur ...

  • Nissin Di866 - page 4

    The flash illumination coverage of Di866 responds to the lens focal length of 24mm to 105mm (full size format/film camera standard). With the latest TTL flash control system, the flash power level is always automatically controlled by the camera for the most appropriate exposure. Y ou can soften or weaken the flash light, or give more light to the ...

  • Nissin Di866 - page 5

    15 16 17 18 Flash Power can be adjusted manually at option. The photographer can set his desired exposure manually by the most appropriate power in combination with the aperture value set on the camera. 22 different power , from full power to 1/128 power , by every 1/3 stops are available. Set the camera mode, to or on your camera. Set the mode of ...

  • Nissin Di866 - page 6

    19 20 21 22 When setting Di866 to the slave function, the zoom setting system is automatically set for the Manual Zoom at 24mm position. The zooming position can be selected manually to any other position available.In this mode, the auto-off timer is recommended to set at 60min. or be cancelled (off). The sensing angle of the slave sensor is 100 ap ...

  • Nissin Di866 - page 7

    Setting of Master and Slave flash: Setting Master flash: The master flash to be set is one unit only . Place the master flash on the camera and switch it on, and set to Manual function mode or set to the camera’s built-in flash on. Make sure which mode you chose, digital pre-flash flash system or analogue flash system. Setting Slave flash Di866: ...

  • Nissin Di866 - page 8

    27 28 29 30 SETTING THE REMOTE FLASH Group A Group B Group C Master Flash Single Group Slave Flash (Group A Setting) 1. Navigate the cursor to Group A 2. Navigate the cursor to Flash mode and select mode: TTL or M Selecting TTL 1. Navigate the cursor to the V alue Adjustment and set the EV compensation level. 2. Navigate the cursor to M (Master). 3 ...

  • Nissin Di866 - page 9

    31 32 33 34 Y ou do not need to set the flash unit for these functions. Functions by Camera setting Di866 offers this function at A and TTL mode. Focus the main subject and press < > button on the camera (or < FEL > button on some cameras. Exposure value on the main subject is memorized in the flash. Aim the viewfinder center over the m ...

  • Nissin Di866 - page 10

    35 36 37 38 When using an external power source, the number of flashes is increased and the recycling time is shortened. The following external power pack is available in option. Di866 is automatically turned off when repeating flash continuously over 20 to 30 times to protect the flash circuitry . It will be automatically reset after 15minutes of ...

  • Nissin Di866 - page 11

    39 In case of the following reasons of the defect, it may void the warrantee. Please refer to the respective warrantee condition for details which varies from different countries. 1. The product is not used in accordance with the instruction of the owner's manual. 2. The product is repaired or modified by the one who is not an authorized repai ...

Manufacturer Nissin Category Camera Flash

Documents that we receive from a manufacturer of a Nissin Di866 can be divided into several groups. They are, among others:
- Nissin technical drawings
- Di866 manuals
- Nissin product data sheets
- information booklets
- or energy labels Nissin Di866
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nissin Di866.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nissin Di866, service manual, brief instructions and user manuals Nissin Di866. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nissin Di866.

Similar manuals

A complete manual for the device Nissin Di866, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nissin Di866 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nissin Di866.

A complete Nissin manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nissin Di866 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nissin Di866, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nissin Di866, that we can find in the current document
3. Tips how to use the basic functions of the device Nissin Di866 - which should help us in our first steps of using Nissin Di866
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nissin Di866
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nissin Di866 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nissin Di866?

Use the form below

If you did not solve your problem by using a manual Nissin Di866, ask a question using the form below. If a user had a similar problem with Nissin Di866 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)