English dropdown-ico

Manual Husqvarna YTH24V42LS

44 pages 3.76 mb
Download

Go to site of 44

Summary
  • Husqvarna YTH24V42LS - page 1

    YTH24V42LS Owner's Manual 532 44 03-82 07002 " This machine is approved by the EP A for E10 (10% ethanol) and lower fuel only . Do not use any fuel >E10 in this machine." ...

  • Husqvarna YTH24V42LS - page 2

    2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROW ING OBJECTS. F AILURE TO OBSERVE THE FOLL OWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH. I. GENERAL OPERA TION • Read, understand, and follow all instructions on the machine and in the ...

  • Husqvarna YTH24V42LS - page 3

    3 SAFETY RULES Safe Operation Practices for Ride-On Mowers • Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary . Al ways look down and behind before and while back- ing. • Never carry children, even with the blades ...

  • Husqvarna YTH24V42LS - page 4

    4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ................................................................. 5-6 OPERA TION ...................................................... ...

  • Husqvarna YTH24V42LS - page 5

    5 UNAS SEMBLED P ARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube AS SEMBL Y Y our new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. Fig. 1 Fig. 2 TO CHECK BA TTERY (See Fig. 1) • Lift hood to raised position. NOTE: If this battery is put into service after month and year indic ...

  • Husqvarna YTH24V42LS - page 6

    6 AS SEMBL Y CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be prop- erly leveled. See “TO LEVEL MOWER HOUSING? ...

  • Husqvarna YTH24V42LS - page 7

    7 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF FUEL CHOKE MOWER HEIGHT REVERS ...

  • Husqvarna YTH24V42LS - page 8

    8 OPERA TION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING Y OUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Our tractors conform to the applicable safety standards of the American Nat ...

  • Husqvarna YTH24V42LS - page 9

    9 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. W e rec om mend standard safety glasses or a wide vision safety mask worn over spectacles. HOW TO ...

  • Husqvarna YTH24V42LS - page 10

    10 OPERA TION TO ADJUST MOWER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. TO MOVE FORWARD AND BACK W ARD (See Fig. 7) The direction and speed of movement is controlled by the forward and reverse drive pedals. • Start tractor and release parking brake. • Slowly depress forward ...

  • Husqvarna YTH24V42LS - page 11

    11 Fig. 10 OPERA TION Fig. 11 TO TRANSPORT (See Figs. 3 and 11) When pushing or towing your tractor , be sure to disengage transmission by placing freewheel control in free wheel ing po- si tion. Free wheel control is located at the rear drawbar of tractor . • Raise attachment lift to highest position with at tach ment lift control. • Pull free ...

  • Husqvarna YTH24V42LS - page 12

    12 OPERA TION CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame. IMPORT ANT : WHEN OPERA TING IN TEMPERA TURES BEL OW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GAS O LINE TO HELP ENSURE GOOD COLD WEA THER ST ART ING. CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can att ...

  • Husqvarna YTH24V42LS - page 13

    13 OPERA TION PURGE TRANSMISSION CAUTION: Never engage or disengage freewheel lever while the engine is run ning. T o ensure proper operation and performance, it is rec om- mend ed that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have de vel- op ...

  • Husqvarna YTH24V42LS - page 14

    14 MAINTENANCE ➀ General Purpose Grease ➁ Refer to Maintenance “ENGINE” Section 01965 ➁ ENGINE ➀ FRONT WHEEL BEARING ZERK ➀ STEERING SECTOR GEAR TEETH ➀ FRONT WHEEL BEARING ZERK ➀ SPINDLE ZERK ➀ SPINDLE ZERK T R A C T 0 R 1 - Change more often when operating under a heavy load or in high ambient temperatures . 2 - Service more o ...

  • Husqvarna YTH24V42LS - page 15

    15 MAINTENANCE TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERA TION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed. (See “TO CHECK BRAKE” in the Ser vice and Ad just ments section of th ...

  • Husqvarna YTH24V42LS - page 16

    16 MAINTENANCE V -BEL TS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able. Re place belts if they begin to slip from wear . Fig. 16 ENGINE LUBRICA TION Only use high quality detergent oil rated with API service classification SG-SL. Select the oil’s SAE viscosity grad ...

  • Husqvarna YTH24V42LS - page 17

    17 MAINTENANCE CL AMP FUEL FIL TER Fig. 17 Fig. 18 • Keep finished surfaces and wheels free of all gasoline, oil, etc. • Protect painted surfaces with automotive type wax. We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transm ...

  • Husqvarna YTH24V42LS - page 18

    18 SERVICE AND ADJUSTMENTS WARNING: TO A VOID SERIOUS INJURY , BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • T urn ignition key to “STOP ” and remove key . • Make sure the blades and all moving parts have completely stopped. ? ...

  • Husqvarna YTH24V42LS - page 19

    19 SERVICE AND ADJUSTMENTS E A M Q F B C C O H D D P Fig. 23 Fig. 24 • Install belt onto electric clutch pulley (M). Fig. 21 Fig. 22 • A TT ACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring. • Repeat on opposite side of tractor . ...

  • Husqvarna YTH24V42LS - page 20

    20 SERVICE AND ADJUSTMENTS FRONT - TO-BACK ADJUSTMENT (See Figs. 28 & 29) IMPORT ANT : Deck must be level side-to-side. T o obtain the best cutting re sults, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position. CAUTION: Blades are sharp. Protect your ha ...

  • Husqvarna YTH24V42LS - page 21

    21 SERVICE AND ADJUSTMENTS TO CHECK BRAKE If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be serviced. Y ou may also check brake by: • Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brak ...

  • Husqvarna YTH24V42LS - page 22

    22 SERVICE AND ADJUSTMENTS TO ST ART ENGINE WITH A WEAK BA TTERY (See Fig. 35) WARNING : Lead-acid batteries gen- er ate ex plo sive gases. Keep sparks, flame and smoking ma te ri als away from bat ter ies. Always wear eye pro tec tion when around batteries. If your battery is too weak to start the engine, it should be recharged. (See "BA TTER ...

  • Husqvarna YTH24V42LS - page 23

    23 SERVICE AND ADJUSTMENTS TO REPL ACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. TO REMOVE HOOD AND GRILL ASSEMBL Y (See Fig. 37) • Raise hood. • Unsnap headlight wire ...

  • Husqvarna YTH24V42LS - page 24

    24 Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any en clo sure. TRACTOR Remove mower from tractor f ...

  • Husqvarna YTH24V42LS - page 25

    25 PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4. Bad spark plug. 4. Replace spark plug. 5. Dirty air filter . 5. Clean/replace air filter . 6. Dirty fuel fil ...

  • Husqvarna YTH24V42LS - page 26

    26 PROBLEM CAUSE CORRECTION Engine continues to run when oper- ator leaves seat with attachment clutch engaged 1. Faulty operator -safety presence control system. 1. Check wiring, switches and connections. If not corrected, contact an authorized service center/ department. Poor cut - uneven 1. Worn, bent or loose blade. 1. Replace blade. Tighten bl ...

  • Husqvarna YTH24V42LS - page 27

    27 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 SCHEMA TIC NO TES M FUSE ST ARTER SOLENOID BA TTER Y ELECTRIC CLUTCH CLUTCH/BRAKE (PED AL UP) REVERSE SWITCH (NO T IN REVERSE) SEA T SWITCH (NO T OCCUPIED) SHORTING CONNECT OR CHASSIS HARNESS IGNITION UNIT HOUR METER REGULA T OR CHASSIS HARNESS CONNECT OR (MA TING SIDE) D A ...

  • Husqvarna YTH24V42LS - page 28

    28 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 ELECTRICAL 8 1 99 100 91 2 27 90 28 55 26 43 41 24 27 25 30 33 22 79 21 40 71 34 16 42 T15S 29 With 12V Outlet Option 59 103 46 45 0 60 AMPS 60 102 105 ...

  • Husqvarna YTH24V42LS - page 29

    29 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 ELECTRICAL KEY P ART NO . NO. DESCRIPTION 1 532 16 34-65 Battery 2 874 76 04-12 Bolt Hex Head 1/4-20 x 3/4 8 532 18 64-91 Box Battery 16 532 17 61-38 Switch Interlock Push-In 21 532 40 02-52 Harness Socket Light w/4152J 22 532 00 41-52 Bulb Light 24 532 40 02-53 Cable Batte ...

  • Husqvarna YTH24V42LS - page 30

    30 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 CHASSIS 130 130 130 208 18 15 25 207 3 297 191 130 234 234 14 203 206 214 204 182 176 176 175 150 130 130 177 176 37 194 194 162 282 282 36 36 285 286 283 199 284 287 202 5 176 176 205 151 137 137 chassis-tex_GT HUSQ II_2_r1 161 178 165 152 159 68 217 194 228 228 236 236 23 ...

  • Husqvarna YTH24V42LS - page 31

    31 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 CHASSIS KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION 2 532 41 22-82 Drawbar 3 532 43 97-52 Applique 4 532 40 50-12 Logo 5 532 43 74-70 Dash 14 532 43 97-25 Hood 15 532 43 97-33 Lens LH 18 532 43 77-62 Grille/Lens Asm. 25 532 43 97-32 Lens RH 36 817 06 05- ...

  • Husqvarna YTH24V42LS - page 32

    32 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 DRIVE 231 51 170 307 214 185 225 125 drive-tex_K46_pedal_72_r2 2 2 73 73 33 205 1 116 33 230 230 183 183 205 116 56 213 221 160 206 26 207 209 92 125 116 64 188 161 35 184 167 160 42 29 15 159 159 221 186 189 49 187 50 51 52 51 190 185 210 284 125 215 153 208 166 211 211 22 ...

  • Husqvarna YTH24V42LS - page 33

    33 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 DRIVE 1 - - - - - - - - - T ransaxle, TUFF TORQ K46CR 2 532 12 35-83 Key 15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga. 17 532 41 36-78 Spring, Brake 26 532 19 96-79 Spring Return Cruise 29 532 40 38-06 Rod, Brake 33 812 00 00-01 Ring E 35 532 43 54-86 Rod, Brake, Park 42 53 ...

  • Husqvarna YTH24V42LS - page 34

    34 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 ENGINE 1 92 12 11 41 42 85 9 29 SP ARK ARRESTER KIT 92 45 90 37 28 37 22 62 70 71 86 69 87 2 engine-tex_Ka wa-2cyl_5 18 15 91 21 20 116 ...

  • Husqvarna YTH24V42LS - page 35

    35 KEY P ART NO . NO. DESCRIPTION 1 - - - - - - Engine KAWA Model No. FR691-AS15 2 532 14 97-23 Muffler 9 532 19 43-20 Keeper Belt Engine 11 532 40 00-08 Clutch Electric 12 532 40 50-97 Pulley Engine 15 532 40 00-21 T ank F uel 18 532 43 02-17 Cap 20 532 42 43-41 Control Throttle 21 532 41 63-58 Screw #10 x .750 BOS Thread 22 532 19 15-96 Control C ...

  • Husqvarna YTH24V42LS - page 36

    36 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 STEERING ASSEMBL Y 55 35 19 63 60 59 58 67 54 67 78 66 54 65 61 55 2 Steering-tex_LEGND2_37 6 5 13 13 53 8 62 4 50 50 70 65 68 69 15 15 14 14 6 16 28 28 13 22 64 63 9 8 7 9 8 7 21 45 51 26 1 ...

  • Husqvarna YTH24V42LS - page 37

    37 KEY P ART NO . NO . DESCRIPTION 1 532 41 64-80 Wheel, Steering 2 532 19 59-68 Axle Asm., Front 4 532 40 30-89 Spindle Asm., LH 5 532 40 30-90 Spindle Asm., RH 6 532 12 49-31 Bearing, Race Thrust Harden 7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga. 8 812 00 00-29 Ring, Clip #T5304-75 9 532 12 12-32 Cap, Spindle 13 532 12 17-49 Washer 25/32 x 1-1/4 ...

  • Husqvarna YTH24V42LS - page 38

    38 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 SEA T AS SEMBL Y 1 532 42 40-71 Seat 2 532 18 01-66 Bracket Pivot Fender 3 532 14 06-75 Strap, Asm Fender 6 873 80 06-00 Nut, Lock w/Ins. 3/8-16 unc 7 532 12 41-81 Spring, Seat Cprsn 8 532 17 18-77 Bolt 5/16-18 unc x 3/4 w/Sems 10 532 19 69-77 Pan, Seat 21 532 17 18-52 Bolt ...

  • Husqvarna YTH24V42LS - page 39

    39 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 DECALS NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO . NO . DESCRIPTION 6 2 1 3 11 4 10 5 9 8 7 wheel_art_1-tex WHEELS AND TIRES KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION 1 532 05 91-92 Cap V alve Tire 2 532 06 51-39 ...

  • Husqvarna YTH24V42LS - page 40

    40 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 MOWER DECK                                        ? ...

  • Husqvarna YTH24V42LS - page 41

    41 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 MOWER DECK KEY P ART NO . NO . DESCRIPTION KEY P ART NO . NO . DESCRIPTION NOTE : All component dimensions given in U.S. inches 1 inch = 25.4 mm 1 575 43 80-01 Deck w/Decals 42" 2 539 11 21-70 Housing Assembly 3 539 10 75-20 Washer -Spacer 4 539 10 76-30 Screw , W ashe ...

  • Husqvarna YTH24V42LS - page 42

    42 TRACTOR - MODEL NO . YTH24V42LS (96043011500), PRODUCT NO . 960 43 01-15 MOWER LIFT KEY P ART NO . NO . DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO . NO . DESCRIPTION 2 532 42 20-27 Shaft Asm., Lift 3 532 19 52-31 Lever Asm., Lift RH 7 532 41 15-55 Grip, Lever 10 532 19 63-14 Spring T orsion 41 5 ...

  • Husqvarna YTH24V42LS - page 43

    43 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees. Make turns gradually to preven ...

  • Husqvarna YTH24V42LS - page 44

    11.08.10 BAD Printed in the U.S.A. ...

Manufacturer Husqvarna Category Lawn Mower

Documents that we receive from a manufacturer of a Husqvarna YTH24V42LS can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- YTH24V42LS manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna YTH24V42LS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna YTH24V42LS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna YTH24V42LS, service manual, brief instructions and user manuals Husqvarna YTH24V42LS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna YTH24V42LS.

Similar manuals

A complete manual for the device Husqvarna YTH24V42LS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna YTH24V42LS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna YTH24V42LS.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna YTH24V42LS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna YTH24V42LS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna YTH24V42LS, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna YTH24V42LS - which should help us in our first steps of using Husqvarna YTH24V42LS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna YTH24V42LS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna YTH24V42LS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna YTH24V42LS?

Use the form below

If you did not solve your problem by using a manual Husqvarna YTH24V42LS, ask a question using the form below. If a user had a similar problem with Husqvarna YTH24V42LS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)