English dropdown-ico

Manual Diamond Audio Technology D1 400.1

12 pages 2.51 mb
Download

Go to site of 12

Summary
  • Diamond Audio Technology D1 400.1 - page 1

    D1 250.2 | D1 300.4 | D1 400.1 AMPLIFIER INST ALL A TION MANUAL ...

  • Diamond Audio Technology D1 400.1 - page 2

    2 Congratulations! Thank you for choosing a Diamond Audio T echnologies D1 Series amplier . We sincerely believe that DAT products offer you outstanding per- formance and value. DA T products ar e engineer ed and produced with the highest quality materials and incorporate the latest technology . We think you will nd your new DA T amplier m ...

  • Diamond Audio Technology D1 400.1 - page 3

    3 Fr equency Response: 20Hz to 20KHz +/-3 dB Signal to Noise Ratio: > 95dBA (20 to 20kHz) Channel Separation 50dB THD+N(T otal Harmonic Distortion + Noise) < 0.2% (Output-1W 4 Ohms) RCA Input Sensitivity: 150mV to 4V RCA Input Impedance: > 20K Ohms Hi-Level Input Sensitivity: 1.5V to 14V Hi-Level Input Impedance: 32 Ohms Min to Max V oltag ...

  • Diamond Audio Technology D1 400.1 - page 4

    4 Connections and Contr ols This section describes how all of the terminals and adjustments of DA T D1 Series ampliers function. D1 250.2 2-Channel Amplifier These Functions are Identic al for Each Pair of Channels (Fr ont and Rear) D1 300.4 4-Channel Amplifier D1 400.1 Mono Amplifier 218 x 57.5mm D1.250.2 D1.300.4 Primex 3pt 10˚ slant .3 pt ...

  • Diamond Audio Technology D1 400.1 - page 5

    5 RCA Input and Pass-Thru Output - These RCA jacks allow for a normal Left and Right channel signal input. Simply connect to the source unit using RCA type audio cables, keeping them away from power wiring wher ever possible. On the 4 channel amplifiers (D1 300.4) “F ront” and “Rear” input jacks are present. The “Pass-Thru” output allo ...

  • Diamond Audio Technology D1 400.1 - page 6

    6 Installation Guidelines T ools and Supplies Listed bel ow ar e the tools and supplies needed to compl ete this installation: • V olt/Ohm Meter • Wir e strippers and wir e cutters • #2 Phillips scr ewdriver • Battery post wr ench • Hand held drill w/assorted bits • High quality electric al tape or heatshrink tubing • Soldering ir on ...

  • Diamond Audio Technology D1 400.1 - page 7

    7 Mounting Locations Engine Compartment Never mount this unit in the engine c ompartment. Mounting the unit in the engine compartment will void your warranty . T runk Mounting Mounting the amplier v ertically will pr ovide adequate cooling of the amplier . If you will be mounting it t o an existing panel, be sur e it’ s not prone to e xces ...

  • Diamond Audio Technology D1 400.1 - page 8

    8 3) T rim the power cable within 18 inches (45.7mm) of the positive batt ery post and splice in a in-line fuse holder . DO NOT install the fuse at this time. 4) Strip 1/2 inch (12.7mm) from the battery end of the power cable and crimp a large ring terminal to the cabl e. Connect the ring terminal to the positive (+) battery post. 5) Prepa re the g ...

  • Diamond Audio Technology D1 400.1 - page 9

    9 25A 25A F R BRIDGE + + – + – – 25A FUSE REM GND +12V 30A FUSE BRIDGE L R + + – + – – REM GND +12V Connecting Multiple Speak ers If you must connect more than one speaker per channel, there are two methods in which to do so: Series or Parallel. Parall el connections are harder on the amplier than series connections, as the total imp ...

  • Diamond Audio Technology D1 400.1 - page 10

    10 Installing the Remote Le vel Controll er The D1 400.1 comes packaged with a r emote lev el contr ol. This allows you to contr ol the lev el by attenu- ating the amplitude or incr easing (up to the maximum set-point ) of the amplier’ s input gain contr ol. This contr ol does not add additional bass boost, it simply all ows you to c ontrol th ...

  • Diamond Audio Technology D1 400.1 - page 11

    11 Adjustment of Built-In Crosso ver (All Models) Placing the switch in the HP position sets the amplier to the High P ass mode, enabling fr equencies above the cutoff point t o pass. Placing the switch in the LP position sets the amplier to the Low Pass mode, enabling frequencies below the cut off point to pass. Placing the switch in the OFF ...

  • Diamond Audio Technology D1 400.1 - page 12

    042007 Diamond Audio W arranty Diamond Audio T echnologies, LLC (DA T) warrant s this product to be free fr om defect s in mate- rial and workmanship f or a period of one (1) year from the original date of pur chase pr ovided it was pur chased from an authorized DA T ret ailer within the United States. Ho wever, if this pr oduct was install ed by a ...

Manufacturer Diamond Audio Technology Category Stereo Amplifier

Documents that we receive from a manufacturer of a Diamond Audio Technology D1 400.1 can be divided into several groups. They are, among others:
- Diamond Audio Technology technical drawings
- D1 400.1 manuals
- Diamond Audio Technology product data sheets
- information booklets
- or energy labels Diamond Audio Technology D1 400.1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Diamond Audio Technology D1 400.1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Diamond Audio Technology D1 400.1, service manual, brief instructions and user manuals Diamond Audio Technology D1 400.1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Diamond Audio Technology D1 400.1.

Similar manuals

A complete manual for the device Diamond Audio Technology D1 400.1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Diamond Audio Technology D1 400.1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Diamond Audio Technology D1 400.1.

A complete Diamond Audio Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Diamond Audio Technology D1 400.1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Diamond Audio Technology D1 400.1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Diamond Audio Technology D1 400.1, that we can find in the current document
3. Tips how to use the basic functions of the device Diamond Audio Technology D1 400.1 - which should help us in our first steps of using Diamond Audio Technology D1 400.1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Diamond Audio Technology D1 400.1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Diamond Audio Technology D1 400.1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Diamond Audio Technology D1 400.1?

Use the form below

If you did not solve your problem by using a manual Diamond Audio Technology D1 400.1, ask a question using the form below. If a user had a similar problem with Diamond Audio Technology D1 400.1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)