English dropdown-ico

Manual Speco Technologies DVR-T4IP

126 pages 5.97 mb
Download

Go to site of 126

Summary
  • Speco Technologies DVR-T4IP - page 1

    USER MANUAL 4-CHANNEL TRIPLEX NETWORK DVR DVR-T4IP * Default system password: 111111 (for RAMS, Record stop, Menu set up, System off, Auto key lock ) * Default ID: admin (for RAMS) Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.specotec ...

  • Speco Technologies DVR-T4IP - page 2

    2 T o prevent fire or shock hazard, do not expose the unit to rain or moisture. The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. The symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within ...

  • Speco Technologies DVR-T4IP - page 3

    3 Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as ...

  • Speco Technologies DVR-T4IP - page 4

    4 T able of content s 1. SYSTEM OV ER VIEWS .......................................................... 13 1.1 P ACKING LIST ....................................................................................................................... 13 1.1.1 Components....................................................................................... ...

  • Speco Technologies DVR-T4IP - page 5

    5 2.6.1 Press the Pl ay button .......................................................................................................... . 25 2.6.2 Audio f iles .................................................................................................................... ....... 25 2.7 S EARCH ................................................ ...

  • Speco Technologies DVR-T4IP - page 6

    6 3.2.2.3 Channel number ................................................................................................................. ................. 34 3.2.2.4 Quality ................................................................................................................................................ 34 3.2.2.5 Frame rate ....... ...

  • Speco Technologies DVR-T4IP - page 7

    7 3.3.8.3 SMTP Server IP address ......................................................................................................... ............ 47 3.3.8.4 Authentication................................................................................................................. .................... 47 3.3.9 Event Log ................... ...

  • Speco Technologies DVR-T4IP - page 8

    8 3.7.5 Language ............................................................................................................................. 62 3.7.6 System Log.......................................................................................................................... 62 3.7.7 HDD Setup .............................................. ...

  • Speco Technologies DVR-T4IP - page 9

    9 3.1 1 PLA YBACK....................................................................................................................... . 73 3.1 1.1 PLA YBACK of recorde d Images ........................................................................................ 73 3.1 1.1.1 Method of playback ................................................. ...

  • Speco Technologies DVR-T4IP - page 10

    1 0 4.3.21 Close pr ogram ..................................................................................................................... 93 4.4 U NI P LA YER .......................................................................................................................... 93 4.4.1 Screen and butt on .................................. ...

  • Speco Technologies DVR-T4IP - page 11

    1 1 5.1.1 Installing single ha rd disk drive ......................................................................................... 11 3 5.1.2 Installing two hard disk drives. .......................................................................................... 11 4 5.1.3 Installing CD -R W drive............................................. ...

  • Speco Technologies DVR-T4IP - page 12

    1 2 All rights reserved. No part of th is p ublication may be reproduced or transmitted in any form or any means, electronic or m echanical, including photocopy , recording, or any information storage and retrieval system, without prior perm ission. ...

  • Speco Technologies DVR-T4IP - page 13

    1 3 1. SYSTEM OVER VIEWS 1.1 Packing list The following items are included with the DVR-T4IP . Please be certain that all items are included as soon as you open the box: 1.1.1 Component s  DVR-T4IP (Main Assembly)  Power cable  Rack mount brackets  DSUB-15 connector for PTZ /AUX / ALARM  Quick Manual  Software CD (RAMS, UniPlayer ...

  • Speco Technologies DVR-T4IP - page 14

    1 4 1.2 Features & specifications 1.2.1 Features  4-channel Embedded Digital Video Recorder  MPEG-2 compression  Quadplex mode for simultaneous recordi ng, playback, backup, and networking  Live remote viewing, on-the-fly reco rding, and control over the network  Dynamic IP support (DHCP & PPPoE)  Alarm triggered FTP and E ...

  • Speco Technologies DVR-T4IP - page 15

    1 5 1.2.2 Specifications Item Description Image System NTSC, P AL selectable Video Input 4CH Composite, 4CH Loop through, BNC Video Output 1CH Composite, BNC, 1CH S-Video Video Compression MPEG-2 Quad NTSC: 720x480 (30fp s) P AL : 720x576 (25fps) Recording Resolution MUX NTSC: 720x480 (30fps), 360x240 (120fp s) P AL : 720x576 (25fps), 360x288 (100f ...

  • Speco Technologies DVR-T4IP - page 16

    1 6 1.3 Name, function & connections 1.3.1 Front view 12 3 4 5 6 7 8 Description: 1. Removable HDD Rack or CD-RW Rack  Removable Hard Disk Drive or CD RW Drive 2. LED indicator  POWER: Power Off st atus is indicated by a R ed light and ON st atus is indicated by a Green light.  REC: Green light (Recording)  ALARM: Green light (Alarm ...

  • Speco Technologies DVR-T4IP - page 17

    1 7  ZOOM: Zoom In/Out on the images during Live Viewing.  FRZ : Freeze. - Press button once to freeze the frame at live mode. Press again to return. - T o take a still image capture at playback mode. -Exchange of video input type : Press p ower butt on with FRZ button from NTSC to Pal or P AL to NTSC.  MISC/SH: Miscellaneous functions or ...

  • Speco Technologies DVR-T4IP - page 18

    1 8 8. Recording/Playback buttons  RECORD: Press once to begin recording all acti ve channels. Press again to end recording.  R-PLA Y : Reverse Playback. Press to begin reverse playback. Under PTZ control menu, used to decrease the speed of Pan, T ilt, Zoom, Focus.  STOP: S top playback.  PLA Y : Access to playback. - Playback button wi ...

  • Speco Technologies DVR-T4IP - page 19

    1 9 6. VIDEO OUT  T erminals for composite video and s-video to connect with monitor 7. CAMERA  IN: Video input (to connect with camera output)  OUT : Vi deo output (Loop-through output for video input) 8. F AN  Heat protection fan to reduce heat in the unit 9. POWER INPUT  Power cord terminal (free voltage, 100 - 240V AC, 50Hz/60Hz) ...

  • Speco Technologies DVR-T4IP - page 20

    2 0 1.3.3 Remote control function POWER NET HDD NUMBER SEQ DIRECTION / OK REVERSE PLAY STOP FRZ PTZ 4 Division MUTE REC LOG INFO LOCK DVR SEARCH MENU MULTI PAUSE PLAY ZOOM OSD  MUTE: V oice Mute support or not support  HDD: HDD status information  NET : Network connection status & user connection information  INFO: Hardware & So ...

  • Speco Technologies DVR-T4IP - page 21

    2 1 1.4 INST ALLA TION 1.4.1 Installation and connection Camera 1 Camera 4 Camera 3 Camera 2 Monitor Speak Sensor 1 PTZ Reciever Alarm Network USB Sensor 4 Sensor 3 Sensor 2 RS-485 AUX IN AUX OUT Mic 1.4.1.1 Camera The unit comes with 4 video IN a nd 4 video OUT for up to four camera connection. Connect to 'IN' terminal fo r video input a ...

  • Speco Technologies DVR-T4IP - page 22

    2 2 1.4.1.3 Audio : support or not support Use IN for a Line input and OUT for speaker output. 1.4.1.4 RS-232 Use this connector to connect RS-232 cable to the serial port on your PC to control the DVR or to perform Quick Installation. 1.4.1.5 PTZ/AUX/ALARM 1.4.1.5.1 RS-485+, RS-485- DVR-T4IP use s RS-485 protocol to control PTZ Receiver , S peed D ...

  • Speco Technologies DVR-T4IP - page 23

    2 3 1.4.1.5.4 Sensor 1~4 Users can connect up to four N.O./N.C. type sensors and co nfig ure them within Main Me nu, Sensor Setting. 1.4.1.6 Network Connect RJ-45 Ethernet cable. 1.4.1.7 USB flash memory Perform backup of record ed video files fr om DVR system to USB flash memory manually . ...

  • Speco Technologies DVR-T4IP - page 24

    2 4 2. Basic operation procedures 2.1 Power On/Off 2.1.1 Power on Using either the keyp ad or the remote control, pr ess the “Power” button. (Note: In case of power outage or rare inst ance of system failure, the DVR will reboot automatically) The Power LED light will turn from red to green when it has turned on properly . In a standby mode, th ...

  • Speco Technologies DVR-T4IP - page 25

    2 5 2.5.1 Recording types There are two types of recording: MUX or QU AD type. For resolution, select either D1 (720*480 (NTSC), 720*576 (PAL)) or CIF (360*240 (NTSC), 360*288 (PAL)). Audio channel is synchronized with the selected video signal. Select Video input quality, Frame rate, and recording mode. 2.5.2 Recording modes Recording mode are mad ...

  • Speco Technologies DVR-T4IP - page 26

    2 6 2.8 Backup The DVR-T4IP has various types of backup methods : 2.8.1 Removable HDD  If there are two hard disk drive s equipped in the DVR, the removable HDD will be used as a backup drive. MANUAL BACKUP , AUTO BAC KUP will be selectable for backup.  MANUAL BACKUP: Execute backup dur ing user ’s preferable setting.  AUTO BACKUP: Execu ...

  • Speco Technologies DVR-T4IP - page 27

    2 7 2.9 Client Program 2.9.1 RAMS (Remote Access & Monitoring System)  Remotely access, monitor , and operate the DVR for real-time live viewi ng, playback, backup, on-the-fly recording, and c ontrol over the LAN/W A N  Upgrade the S/W(Kernel, Ramdisk) of DVR  Install the RAMS program as referred to in section 4.2 of Operation Manual. ...

  • Speco Technologies DVR-T4IP - page 28

    2 8 3. Main Setup screen Figure 3-1 Main Setup screen 3.1 Camera Setup menu Figure 3-2 Camera setup screen ...

  • Speco Technologies DVR-T4IP - page 29

    2 9 3.1.1 Channel number . A user can select t argeted camera fro m CH #1 ~ CH # 4. After setting, this, live viewin g picture will be changed to selected channel automatically . 3.1.2 Camera Name Edit Figure 3-3 Camera name edit screen User can edit came ra name indicated b utton part of each channel. as explain ed parag raph 2.1.1. According to a ...

  • Speco Technologies DVR-T4IP - page 30

    3 0 3.1.4 PTZ setup Figure 3-4 PTZ setup screen It sets PTZ protocol of t argeted channel in the Camera Setup. (Please refer to p aragraph 3.1.1 for channel selection) 3.1.4.1 Model Number Select the PTZ model or choose “NONE”. 3.1.4.2 PTZ ID Set the PTZ ID: 0 ~ 255 The PTZ ID must match the ID numb er that has be en set by the PTZ Controller . ...

  • Speco Technologies DVR-T4IP - page 31

    3 1 3.1.4.4 RS-485 Setting Choose from the following to set PTZ RS-485 b aud rate: 2400, 4800, 9600, 1 9200, 38400, 57600, 1 15200 bps. 3.1.4.5 TEST Users can test the PTZ control af ter setting the parameters. After clicking the TEST button, PTZ control will be available and tested by up/ down key . Pan/tilt and Zoom/Focus mode will be controlled ...

  • Speco Technologies DVR-T4IP - page 32

    3 2 Preset numbers are selected by Lef t/R ight buttons and the Pan/T ilt drive moves to the preset position after pressing OK button. - Light : T o turn on/off t he camera lighting selected by Left/Right and OK buttons. - Camera : T o turn on/off the camera itself selected by Left/Right and OK buttons. - Aux : T o turn on/off the AUX (two) connect ...

  • Speco Technologies DVR-T4IP - page 33

    3 3 3.2 Record Setup menu 3.2.1 Record T ype Users can select either Quad mode or MUX mode for recording type. MUX Recording records full size recording sequentially from each channel. Quad recordi ng records 4 cha nnel video signal as one same picture a nd each channel h as quad sliced size. Under MUX Recordin g mode, resolution will be applicable ...

  • Speco Technologies DVR-T4IP - page 34

    3 4 3.2.2.2 Audio Sync As audio input port is on e channel available, user should syn c hronize a udio signal with targeted video signal. With sy nchronized channel w ill record audio as well as video. But others will only record video input signal only . 3.2.2.3 Channel number Under MUX recording mo de, quality , frame rate will be selected per ch ...

  • Speco Technologies DVR-T4IP - page 35

    3 5 alarm recording will be con trolled at Post alarm recording time on Event Setup Menu. (Refer to paragraph 3.3.4) • Sensor: S tart to record under se nsor inpu t. As same as motion mode, it st arts pre alarm recordin g around 2 or 3 secon d and maintain it until no of sensor input. Post-alarm recording will be controlled at Post alarm recordin ...

  • Speco Technologies DVR-T4IP - page 36

    3 6 3.2.3.3 Audio ON/OFF User can set audio on/off function. If used A udio O n mode, audio signal will be recorded simultaneously with video and used audio of f mode, audio signal not be recorded. 3.2.3.4 Frame rate 3.2.3.4.1 NTSC User can set the recording Frame rate at Quad Recording, none (Non recording), 1, 2, 3, 5, 7, 10, 15, 30 fp s will be ...

  • Speco Technologies DVR-T4IP - page 37

    3 7 User can select to set recording schedule targeted date, time based week & 24Hours. Move the cursor to the desired position of time by pressing up/do wn key and set the recording mode at the desired position of time by pressing the OK button with referring to the Help Message per Record Mode on the right posit ion. Af ter the setup, store t ...

  • Speco Technologies DVR-T4IP - page 38

    3 8 3.3.1 Motion Detection Setting Figure 3-1 1 Motion Detecting Setup screen Sets up the motion detect ing area and sensitivity . It sets u p all 4 channels when it is set on the Quad recording. 3.3.1.1 Channel Sets up the motion dete cting area and sensitivity for each chan nel. It sets up all 4 channels when it is set on the Quad recording. Unde ...

  • Speco Technologies DVR-T4IP - page 39

    3 9 3.3.1.3 Detection Zone Figure 3-12 Motion Detecting Area Setup screen Selects the motion detecting area. The sky blue square implies the current cursor and the yellow square implies the area that was alr eady selected as the motion detecting area. When the cursor positions on the area that was selected a s the motion detecting area, it turns gr ...

  • Speco Technologies DVR-T4IP - page 40

    4 0 3.3.2 Sensor Setting Figure 3-13 Sensor Setting screen 3.3.2.1 Sensor T ype N.O.: Norm al Open. Operation mode f or the install ed sensor’s contact p oint is usually open in normal condition and changed from open to close at sensor ’s detect event. N.C.: Normal Close. Operation mode for the in stalled sensor ’ s contact point is usually c ...

  • Speco Technologies DVR-T4IP - page 41

    4 1 3.3.3 Alarm Output Figure 3-14 Alarm Output Setting: 3.3.3.1 Sensor Configure the alarm out on/off activated by the sensor . 3.3.3.2 Motion Configure the alarm out on/off tr iggered by the motion detection. 3.3.3.3 Relay Time Configure the alarm duration time. It can be set up from 1 second to 60 se con ds in the unit of 5 seconds. 3.3.4 Post A ...

  • Speco Technologies DVR-T4IP - page 42

    4 2 3.3.5 FTP Setting Figure 3-15 FTP Setting Enables the unit to transmit an assigned FTP Len gth of Motion picture to an FTP Server over network when an event occurs. The event will be transmitt ed 15 seconds af ter the event occurs. 3.3.5.1 FTP Server IP address Configure the IP address of the FTP server . The number cha nges by moving left and ...

  • Speco Technologies DVR-T4IP - page 43

    4 3 3.3.5.2 ID Configure the FTP ID. The ID can contain maximum of 31 characters. Figure 3-16 FTP ID 3.3.5.3 Password Configure the FTP p assword. The password can contain maximum of 12 characters. Figure 3-17 FTP Password input ...

  • Speco Technologies DVR-T4IP - page 44

    4 4 3.3.5.4 T arget Path Configure the path to tra nsmit to an FTP se rver . The path ca n contain m aximum of 31 characters. Figure 3-18 FTP Target Path 3.3.5.5 FTP Length of Image (second) Select FTP length of image by second (5 to 10 seconds are select able) to transmit image files for selected seconds. 3.3.6 FTP T rigger Setting Selects on/of f ...

  • Speco Technologies DVR-T4IP - page 45

    4 5 Figure 3-19 FTP T rigger Setting 3.3.6.1 Sensor Configure sensor events. 3.3.6.2 Motion Configure motion events. 3.3.7 E-Mail Address Setting T ransmits the content of an event log periodically through e-m ail. Configure up to four e-mail address to tr ansmit under event st atus simu lt aneously . The e-mail address can contain maximum of 31 ch ...

  • Speco Technologies DVR-T4IP - page 46

    4 6 Figure 3-20 E-Mail Address setting 3.3.8 E-Mail Setting Figure 3-21 E-Mail Setting 3.3.8.1 Send (Period) Configure the e-mail transmitting cycle. It does not transmit when it is set to NO. The setting time can be set up at the unit s of within 2 minutes af ter event, 30minutes, 1, 2, 5, 12, 24 hours. ...

  • Speco Technologies DVR-T4IP - page 47

    4 7 3.3.8.2 Prohibition setting Set up prohibition time to transmit the e-mail. Users can enter prohibiti on time from the starting time and the ending time of transm itting the e-mail 3.3.8.3 SMTP Server IP address Configure the IP address of the SMTP server to transmit the e-mail. If you do not know your SMTP server IP address then go to Command ...

  • Speco Technologies DVR-T4IP - page 48

    4 8 3.3.8.4.1 Password Enter sender ’ s mail password for authentication 3.3.9 Event Log Shows the event log of the sel ected channel. It can re set periodically by setting e-mail a s described in paragraph 3.3.7. Figure 3-22 Event Log Display screen ...

  • Speco Technologies DVR-T4IP - page 49

    4 9 3.4 Playback Setup Figure 3-23 Playback setup screen 3.4.1 Channel Designate the chann el to be viewed when the “R eplay” button is pressed a nd Channel 1 ~ Channel 4 can be selectable . This option is onl y available when the MUX m ode has been selected. (Please refer t o paragraph 3.2.1 for Record type) 3.4.2 St arting Point This starting ...

  • Speco Technologies DVR-T4IP - page 50

    5 0 3.5 Display Setup screen Figure 3-24 Display setup screen Determine whether to have the following be shown on the monitor: Camera n ame, T ime/Date, HDD status, Borders (Quad V iew). Sel ect either ON/OFF for each item. ...

  • Speco Technologies DVR-T4IP - page 51

    5 1 3.6 Network Setup screen Figure 3-25 Network Setup screen 3.6.1 DDNS setting Set up DDNS (Dynamic Domain Name System) server address & port number . Users can set up two DDNS server address and port. Figure 3-26 DDNS setup screen ...

  • Speco Technologies DVR-T4IP - page 52

    5 2 Under DHCP or PPPoE configuration using IP Router , the DVR will receive an IP address periodically , and each time, the IP addre ss can be differe n t. Therefore, in order for users to access the DVR over the netwo rk, it must update its IP address to the DDNS Server . Under IP router configuration, IP of DVR mu st be setup as static IP addres ...

  • Speco Technologies DVR-T4IP - page 53

    5 3 3.6.2 Remote Connection Login Passw ord There are two levels of access that can be set up in the RAMS program. - Admin (Highest), User (Normal) - B y d e f a u l t , t h e p a s s w o r d i s 111111 w hen the software is first installed. Users can use any numeric number from 0~4, combined 6 units. Figure 3-27 Remote Connection Login Password sc ...

  • Speco Technologies DVR-T4IP - page 54

    5 4 3.6.4 St atic Figure 3-28 S tatic Network setting 3.6.4.1 DDNS On/off 3.6.4.2 Port Configure the Port number to be used to conn ect to the DVR system using RA MS (Remote Access & Monitoring System). The default Port number is port 80. Chang e easily by using Jog/shuttle equipped in front panel. 3.6.4.3 IP Address Assign a fixed IP address t ...

  • Speco Technologies DVR-T4IP - page 55

    5 5 3.6.5 DHCP Figure 3-29 DHCP setup screen 3.6.5.1 Port Please refer to paragraph 3.6.4.1for Port setting of S tatic/ DHCP/ PPPoE) 3.6.6 PPPoE Figure 3-30 PPPoE setting ...

  • Speco Technologies DVR-T4IP - page 56

    5 6 3.6.6.1 Port Please refer to the port setting in paragraph 3.6.4. 3.6.6.2 ID T ype in your user ID for the ADSL account (PPPoE). The password can cont ain maximum of 31 characters. Figure 3-31 ID input screen 3.6.6.3 Password T ype in your user Password fo r the ADSL account (PPPoE), The password can cont ain maximum of 12 characters. Figure 3- ...

  • Speco Technologies DVR-T4IP - page 57

    5 7 3.6.7 Changing the Netw ork configuration If users want to change ne twork type of DVR-T4 IP , users must reboot the system. User can restart the new network mode setting af ter entering ‘yes’ key button. Figure 3-33 Changing the Network setting screen 3.7 System Setup screen Figure 3-34 System Setup screen DVR-T4IP ...

  • Speco Technologies DVR-T4IP - page 58

    5 8 3.7.1 DVR Name T ype in the name of the DVR you wish to assi gn. The name can contain maxi mum of 12 digits. Figure 3-35 DVR name screen Using the arrow , type in the DVR name. Click “OK” when finished. 3.7.2 System Password Figure 3-36 System password set up DVR-T4IP ...

  • Speco Technologies DVR-T4IP - page 59

    5 9 Set up part for system password, related function and application. This is a part of inst allation, actual sy stem password, related function and p assword application. 3.7.2.1 Password Setting T o change system password: First, type-in the current p assword, confirm. T hen if it is correct, type-in the new p assword twice. If they match, the p ...

  • Speco Technologies DVR-T4IP - page 60

    6 0 3.7.2.3 Auto Key Lock Possible Setting time is every 30sec, 1 min, 3min, 5min, 10 minutes. If users choose setting time among them, auto key lock function will st art exactly after the setting time and lock key type icon will be displayed at the bottom of window . Users can access syste m operation after release from key lock state by entering ...

  • Speco Technologies DVR-T4IP - page 61

    6 1 For example, if users ado pt day light saving time from May 01 to Oct.31, input the dates accordingly . 3.7.3.3.1 Apply Configure Day Light Saving T ime. 3.7.3.3.2 St art date (m/d) Set up start day in Day Light Saving Time mode. 3.7.3.3.3 End date (m/d) Set up end date in Day Light Saving T ime mode. 3.7.3.3.4 Apply hour Set up the duration ti ...

  • Speco Technologies DVR-T4IP - page 62

    6 2 3.7.5 Language English, Korean, Japanese and S panish are available. 3.7.6 System Log It is for displaying major system events. The items that manage by Log are V ideo Loss, Power On, Power Off, Menu entry , HDD Full, failure of FTP transmission, failure of E-mail transmission. Figure 3-40 System Log screen 3.7.7 HDD Setup Set up for Internal H ...

  • Speco Technologies DVR-T4IP - page 63

    6 3 3.7.7.1 The number of HDD Show the HDD quantity that is built –in. 3.7.7.2 Write Mode Set up writing type in recording. T ypes are ‘Once’ and ’Overwrite’. If set up by ‘On c e’, HDD can reco rd until the Full state. If set by ‘Overwrite’, HDD will record conti nuously by start overwrite oldest data. 3.7.7.3 Forced erasure The ...

  • Speco Technologies DVR-T4IP - page 64

    6 4 3.7.7.5.1 Cap acity Please refer to paragraph 3.7.3.1. 3.7.7.5.2 Function Set up for Removable HDD usage. Use rs can fix it for manual Backup, Auto backup, Extension. If it is fixed to manual backup, user s can use for manual backup. It is fixed to auto backup, system will a utomatically backup re cordin g image. If it is fixed by extensi on, i ...

  • Speco Technologies DVR-T4IP - page 65

    6 5 Figure 3-44 Set up AUX port screen 3.7.8.1 Active Set up Active state. Low/High will be dif ferent depend on machine.. 3.7.8.2 Function The following list contains a brie f description of each function. 3.7.8.2.1 Direction : IN • UNUSED: Do not use the AUX port. • ALARM RESET IN: Pause alarm or buzzer when event occurred • RECORD ST ART I ...

  • Speco Technologies DVR-T4IP - page 66

    6 6 3.7.9 Factory Default All of set-up date of system comes back to Factory default. Confirmation box on picture setting default w ill appear af ter entering default. User can restore the factory default setting after entering ‘yes’ key button. Please refer to paragraph 5.3 for factory default. Figure 3-45 Confirmation box for Factory Default ...

  • Speco Technologies DVR-T4IP - page 67

    6 7 Figure 3-46 Software Upgrade - After the unit recognizes the U SB flash drive and upgrading end, the unit will reboot. Figure 3-47 Ramdisk Upgrade 3.8 Backup Backup recording data to HDD or USB Flash Drives Figure 3-48 Backup image ...

  • Speco Technologies DVR-T4IP - page 68

    6 8 3.8.1 Backup Device Set up the device for backup. HDD / USB/ CD-RW are available In order to use HDD for backup, the functi on of HDD should be setup as “Manual Backup” In the HDD Setting. 3.8.2 St art T ime Input the start of backup date and time. 3.8.3 End Time Input the end of backup date and time. 3.8.4 Channel Choose the channel to bac ...

  • Speco Technologies DVR-T4IP - page 69

    6 9 3.9 System Information Figure 3-49 System Information 3.9.1 V ideo type It shows that present V ideo type of System is NTSC or P AL. 3.9.2 H/W version It shows the H/W V ersion of system. 3.9.3 S/W version It shows the S/W V ersion of system 3.9.4 KERNEL version It shows the S/W V ersion of KERNEL. 3.9.5 Mac Address It shows Mac Address of syst ...

  • Speco Technologies DVR-T4IP - page 70

    7 0 3.10 Search Menu Figure 3-50 Main Screen of Search 3.10.1 Search by T ime The recorded images are search ed by T ime, Channel, Event. DVR saves lat searching condition so it automatically displayed last search condition under search mode. ** Screen where the condition of search will be input. Figure 3-51 Search by time 3.10.1.1 St arting Time S ...

  • Speco Technologies DVR-T4IP - page 71

    7 1 3.10.1.2 Ending T ime Ending T ime and date for Search is input. The ending year range is from 1970 to 2037, and it is not p ossible to input any year after 2037. 3.10.1.3 Channel Select the channel for Search from Channel 1 ~ Channel 4. 3.10.1.4 Event Select the Event as follows. • NONE : All of files are searched regardless of Event. • MO ...

  • Speco Technologies DVR-T4IP - page 72

    7 2 3.10.2.1 Screen of search Figure 3-53 Search Screen of S till Image 3.10.3 Search of back up HDD The images that were backed up ma nually or automatically can be searched by T ime, Channel, Event. Figure 3-54 Screen for input data of HDD Search The method of input and search is the same as that of recorde d file, as indicated in the paragraph 3 ...

  • Speco Technologies DVR-T4IP - page 73

    7 3 3.11 PLA YBACK 3.11.1 PLA YBACK of recorded Images This function means that th e images recorded in the system are searched by T ime or Played back directly . 3.11.1.1 Method of playback In order to play back the recorded ima ges, put the Curser to the sele cted content in the Menu of Search, and press Button “ OK”. The screen of Search res ...

  • Speco Technologies DVR-T4IP - page 74

    7 4 3.11.1.3.1 Stop of Play back If user needs to stop play back, user should press button “ STOP” in the remote controller of in the system, and play back stops and live screen is coming back. 3.11.1.3.2 T empo rary S to p d uring Playback In order to stop temporarily playback, press button “ P AUSE”. If users press the button “P AUSE” ...

  • Speco Technologies DVR-T4IP - page 75

    7 5 3.11.1.3.6 Audio ON / OFF In case of recorded image with Audio, u s er ca n on or of f by using the button “ AUDIO MUTE”. The Icon in the top of screen shows t he status (On / Of f) of AUDIO. 3.11.2 Playback of still image 3.11.2.1 Method of playback As the paragraph 3.2.1, users put the curser to contents. In the searched still Image Lists ...

  • Speco Technologies DVR-T4IP - page 76

    7 6 Playback stops and screen of search list appears. 3.11.2.3.2 Next screen Press Button “RIGHT” and next screen is played back. 3.11.2.3.3 Previous screen Press Button “LEFT” and previous screen is played back. 3.11.3 Playback the backed up-image This function means that the images in the backup HDD that were backed up manually or automat ...

  • Speco Technologies DVR-T4IP - page 77

    7 7 3.12.1 NET Displays the current network IP and the user connected to the network. (it substitutes the NET button on the remote control). Figure 3-58 Network Information 3.12.2 OSD T urns on/off the OSD (On Screen Display). It substitutes the OSD button on the r e m o t e c o n t r o l . 3.12.3 Audio Mute T urns on/off the audio. It substitutes ...

  • Speco Technologies DVR-T4IP - page 78

    7 8 4. DVR-T4IP Client program 4.1 Overview of DVR-T4IP  DVR-T4IP (Digital V ideo Recorder , MPEG-2, 4c hannel) has three types of client operation programs.  RAMS (Remote Access & Monitoring System) is us ed to remotely access, monitor , and operate the DVR for real-time live viewing, play back, backup, on -the-fly recording, and control ...

  • Speco Technologies DVR-T4IP - page 79

    7 9 4.3 RAMS (Remote Access & Monitoring System) 4.3.1 Screen and button ① Event indication icon ( Motion, Sensor). The color will change upon event activation. ( => , => ) ② Screen display ③ Channel function button (On/Off, Capture, Record) ④ Channel selection button (1CH, 2CH, 3CH, 4CH, Quad) ⑤ Quad Capture, Quad Record button ...

  • Speco Technologies DVR-T4IP - page 80

    8 0 4.3.2 Connecting to DVR Click icon to open the DVR list. ① This box allows the user to select the IP address assigned to the selected unit. This is required for making a network connection. ② To create a new IP address & DVR select ion, enter the DVR name, DVR address, and port number. ③ Click Add to add the newly entered DVR informat ...

  • Speco Technologies DVR-T4IP - page 81

    8 1 4.3.3 Channel On/Off After connected, icon is changed to icon. Under this status, if users push icon, channel name & date displayed in front part of this screen will be phased out. Under bad network transmission condition, if users use selected channel, pre-allocated channel transmission will be better. If users enter this icon again, enter ...

  • Speco Technologies DVR-T4IP - page 82

    8 2 4.3.5 Full-screen display If you push this icon in the main menu, full screen form appears. If users press the key of ESC, you will return to the selected screen. 4.3.6 Program setup If users click this button in the main window, window of program setup appears. ① Capture a still image and select a folder where the image is recorded C:Progra ...

  • Speco Technologies DVR-T4IP - page 83

    8 3 ② Select the image of water mark to be input in the still image ③ Set up a program by user’s language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated. ⑤ Close the window without saving the setup ⑥ Close the window after saving the setup 4.3.7 DVR recording It works as recording button of ...

  • Speco Technologies DVR-T4IP - page 84

    8 4 => DVR (Recording mode) 4.3.8 DVR playback search This button is used for playback search , playback, and backup functions for DVR and after logging in by admin. ...

  • Speco Technologies DVR-T4IP - page 85

    8 5 ① Enter search time from start time to end time ② Check if user want to search event condition ③ Select targeted channel for search ④ Close DVR playback search ⑤ Start to search by selected searching condition ⑥ Previous research result will appears 4.3.9 DVR playback search Search data will appear list form if users push two button ...

  • Speco Technologies DVR-T4IP - page 86

    8 6 After selecting a file at list, push play button or do double clicks in order to watch playback pictures. ① Change present mode to playback mode ② Display playback picture derived from DVR system ③ Button for reverse playback, pause, still, reve rse phase, forward phase, slow, fast, previous search, next search ④ Comeback playback mode ...

  • Speco Technologies DVR-T4IP - page 87

    8 7 When user use temporarily paus e image file move to forward Play stored files slowly. User can control by clicking this button Play stored files quickly. User c an control by clicking this button Playback button. Start playback previ ous files of present viewing files Playback button. Start playback nex t files of present viewing files 4.3.10 D ...

  • Speco Technologies DVR-T4IP - page 88

    8 8 progress rate. Even backup, users can stop it by pushing button. Close DVR backup window with pushing button. (Even backup mode, it will be stopped & closed.) 4.3.11 DVR Setting This button is for linking into quick installation program is used to manage setting parameter of DVR easily. It can be activated after logging in by admin. 4.3.12 ...

  • Speco Technologies DVR-T4IP - page 89

    8 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image. The dest ...

  • Speco Technologies DVR-T4IP - page 90

    9 0 ① Select the targeted channel changed recording time. Among this mode, Quad mean that timing choice for recording button on main menu ② Continuous recording until clients stop recording mode ③ Continuous recording until targeted minutes . Of course, it stopped manually by users ④ Continuous recording until targeted dat e & time. It ...

  • Speco Technologies DVR-T4IP - page 91

    9 1 4.3.18 HDD Information Orange: used parts of HDD, White: remaining par of HDD. Detailed HDD in formation will be activated on pushing this icon. ① Select hard disk ② It shows total capacity of HDD ③ It shows the used capacity of HDD used ④ It shows the capacity of HDD to be used ⑤ It shows the capacity of HDD used and to be used ⑥ C ...

  • Speco Technologies DVR-T4IP - page 92

    9 2 ③ Display S/W update window of DVR system 4.3.20 S/W upgrade of DVR S/W upgrade window is activated on pushing S/W upgrade button in the program version check screen ① : Select targeted files to upgrade ② : Select targeted files saved in local PC ③ : Enter targeted DVR information such as DVR addre ss, Port, user, and password (admin on ...

  • Speco Technologies DVR-T4IP - page 93

    9 3 4.3.21 Close program Closed Multiviewer program 4.4 UniPlayer 4.4.1 Screen and button ① Icon for event (Motion detec tion, Sensor). If events happen => , => the color of icon changes. ② Button per channel (Capture, Print, D-zoom) ③ Playback picture ④ : Indicator for playback progress rate ⑤ : Reverse playback, playback, still, p ...

  • Speco Technologies DVR-T4IP - page 94

    9 4 ⑮ Button for closing program 4.4.2 Search Users access to search files after push th is icon. As files are default mode, without knowing of files, users can access it. 4.4.2.1 Search option from video image & backup file ① Select whether recording files at RAMS, Multiviewer or backup files ② Enter targeted recording date for search ? ...

  • Speco Technologies DVR-T4IP - page 95

    9 5 => If there is nothing to special condition for search ing, all files saved in recording folder will be displayed on search window after searched. => Search window after selected channel number 1 as search option. ...

  • Speco Technologies DVR-T4IP - page 96

    9 6 4.4.2.2 Search option for still image ① Enter targeted recording date for search ② Enter targeted DVR name for search ③ Enter targeted channel ④ Enter keyword to classification to list ⑤ Start to search accordingly ⑥ Close search option window => If there is nothing to special condition for sear ching, all still images saved in f ...

  • Speco Technologies DVR-T4IP - page 97

    9 7 => Search window after selected channel number 1 & selected date (June 22.004) as search option. 4.4.3 Searching by directory You can use it when you know the director y has AVI file or still image file. It will be set up default directory at first. After that us ers can choose their own directory than see all folder user want to save wi ...

  • Speco Technologies DVR-T4IP - page 98

    9 8 => AVI file Playing screen by searching scene 4.4.4 Still Image Capture Save replaying images into still image by capture. Besides users can capture image by push capture but ton for each channel or push ca pture button at the foot of a screen. Still image will be saved in a path of which is established in RAMS’s setup section screen ...

  • Speco Technologies DVR-T4IP - page 99

    9 9 ① Select check box in order to insert watermark into still image capture ② Save still image as user defined default file name if chosen ③ Save still image as user selected new file name if chosen ④ Insert keyword to user easy searching ⑤ Close still image capture window ⑥ Print still image capture file ⑦ Save still image. The dest ...

  • Speco Technologies DVR-T4IP - page 100

    100 When user use temporarily paus e image file, move to backward When user use temporarily pause image file, move to forward. Play file slowly. Users can control by click this button. Play file quickly. User can control by click this button. 4.4.9 Water mark drawing When still image is display, if push this button watermark will be drawn. If you f ...

  • Speco Technologies DVR-T4IP - page 101

    101  Watermark viewing screen. If you find other colo r except black, white, blue color, image file must get damaged. 4.4.10 Panorama You can see the panorama screen when you pus h this button while file playing. (Button will change into like this button. . And & button can help user to view screen while control screen back and forth. And cl ...

  • Speco Technologies DVR-T4IP - page 102

    102 => Screen in panorama mode. ...

  • Speco Technologies DVR-T4IP - page 103

    103 => Image when click one screen in panorama mode. 4.4.11 Check the program version. Click this icon logo to confirm version. 4.4.12 Close Program Close UniPlayer program ...

  • Speco Technologies DVR-T4IP - page 104

    104 4.5 MultiV iewer 4.5.1 Program login ① Insert program password. ② If inserted password is right, multiviewer runs. ③ Close program ④ Modify program password. ① After inserting current password, change password, & confirm password accordingly, changes program pass. ② Closing window without changing. Return to login window ...

  • Speco Technologies DVR-T4IP - page 105

    105 4.5.2 Screen and Button ① ICON for Event (Motion, Sensor ): If an Event is activated, => , => the color of icons change. ② BUTTON for channel (Connect/Disconnect, Capture, Record) ③ Channel SCREEN ③ Click on icon logo to check the version of program ⑤ Actual Time shows. ⑥ Information of Hard Disk of PC shows ⑦ Button for div ...

  • Speco Technologies DVR-T4IP - page 106

    106 window appear. ① DVR List that user recorded, appears. ② Input DVR name, IP address, domain name, port ③ Input id name ④ Input id password ⑤ Delete the information selected in DVR List ⑥ Modify the information of DVR List ⑦ Add the information in DVR List ⑧ Connect to the selected DVR ID ⑨ Close the screen, after storing DVR L ...

  • Speco Technologies DVR-T4IP - page 107

    107 => Connected screen => If connection is impossible, it displays error defectives on screen. 4.5.4 Camera On/Off In order to connect to DVR in the main screen, please click button, and select DVR, and log in. After connection, please click one more time , and DVR is disconnected. ...

  • Speco Technologies DVR-T4IP - page 108

    108 4.5.5 Full Screen Click the Full Screen button to open a screen in full view. Press ESC to return. . 4.5.6 Program Setup Click to launch Setup. C:Program Files / DVR / DVR Viewer C:Program Files DVR DVR Vi ew er MARK4015 ...

  • Speco Technologies DVR-T4IP - page 109

    109 ① Indicates the file location of the captured still Image ② Indicates the file location of the wate rmark image to be inserted in the still image ③ Select language ④ Set up whether alarm occurrence is on or off when motion detection or sensor icon activated. ⑤ Check the image among 4channels ⑥ Check the image among 9 channels ⑦ Cl ...

  • Speco Technologies DVR-T4IP - page 110

    1 1 0 ① Select HDD disk ② It shows total capacity of HDD ③ It shows the used capacity of HDD ④ It shows the free capacity of HDD ⑤ It shows both the used capacity of HDD and free space ⑥ Click to close the screen 4.5.10 Confirmation of V ersion of Program Click this icon to check the program version. 4.5.11 Closing of Program Click to c ...

  • Speco Technologies DVR-T4IP - page 111

    1 1 1 4.6 Quick Inst aller 4.6.1 Select model Clicks to select DVR model name and video type in order to set system parameters. 4.6.2 System p arameter setting * Right part s on System parameter setting window is same form as Main menu used in DVR system. Users can change DVR system parameter by entering each menu. * Main menu description * File -& ...

  • Speco Technologies DVR-T4IP - page 112

    1 1 2 parameters of DVR. 5. System parameter->Default value se tting: Initialize parameters values. 6. Communication->Network: Communicate data through network. 7. Communication->Serial: Comm unicate dat a through se rial port (Setting preferable ComPort) 8. Language: Click to select preferable language 9. Information: Click to display pro ...

  • Speco Technologies DVR-T4IP - page 113

    1 1 3 5. Appendix 5.1 Inst alling HDD 5.1.1 Installing single hard disk drive The following procedure i s for installing either one internal HDD or one removable HDD. Please note that the Jumper setting must be set to MASTER. T o Install a single HDD in the Removable Bay , please follow these steps  Prepare one HDD. V erify the Jumper setting. I ...

  • Speco Technologies DVR-T4IP - page 114

    1 1 4  Slide-in the Removable Bay in to the DVR  Lock the Removable Bay . 5.1.2 Installing two hard disk drives.  The Jumper setting should be done as follows: - The Internal HDD: Master - The Removable Bay HDD: Slave  Mount the HDD in the internal slot. ...

  • Speco Technologies DVR-T4IP - page 115

    1 1 5  Once the HDD has been firmly mounted in t he DV R, connect the power cable and the data cable.  T o install the second HDD in the Removable Bay , set the Jumper setting on the removable HDD to Slave. Follow the procedur e as listed in p aragraph1.1.1 of Appendix V. 5.1.3 Installing CD-R W drive  T o install the CD-RW drive in the Re ...

  • Speco Technologies DVR-T4IP - page 116

    1 1 6  The CD-RW drive install ed in the DVR system ...

  • Speco Technologies DVR-T4IP - page 117

    1 1 7 5.2 T erminal Information 5.2.1 DSUB-9P (RS-232) 15 69 No Name Description 2 RXD Receive Data 3 TXD T ransmit Data 5 GND Signal Ground 5.2.2 DSUB-15P (PTZ / AUX / ALARM / SENSOR) 18 9 15 No Name Description No Name Description 1 RS-485+ RS-485 T ransmit Data + 9 Alarm Out Alarm Out (NO) 2 RS-485- RS-485 Transmit Dat a - 10 Alarm Out Alarm Out ...

  • Speco Technologies DVR-T4IP - page 118

    1 1 8 5.3 Factory Default V alue 5.3.1 Main Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Channel Channel No CH-1~CH-4 Camera Name CH-1~CH-4 Camera Hide Off Model No NONE URX-500, PELCO-D, SENSORMA TIC, VICON, SUNGJIN MRX-1000 SRX-100B PTZ ID Channel No Reverse Control Pan NO T ilt NO Zoom NO Focus NO PTZ Setup RS-485 Set ...

  • Speco Technologies DVR-T4IP - page 119

    1 1 9 Password Blank T arget Path / FTP Length of Image 5 sec 5, 6, 7, 8, 9, 10 sec Sensor CH1~CH4 OFF FTP T rigger Setting Motion CH1~CH4 OFF Receiver Address 1~4 Blank E-Mail Address Setting Sender Address 1 Blank Send (Period) NO YES / NO NO S tart Hour 01 Prohibition Setting End Hour 01 SMTP Server IP Blank Authentication YES / NO NO E-Mail Set ...

  • Speco Technologies DVR-T4IP - page 120

    120 S tart Date (m/d) 01/01 End Date (m/d) 01/01 Apply Hour 00 Sensor OFF Motion OFF Buzzer Video Loss OFF Language ENGLISH System Log Mounted HDD 1 or 2 Write Mode Overw rite Forced Deletion (day s ago) OFF 1~100 Capacity Used Cap. / T ota l Cap. Internal HDD Format Capacity Used Cap. / T ota l Cap. Function EXTENSION HDD Setup Removable HDD Forma ...

  • Speco Technologies DVR-T4IP - page 121

    121 5.3.2 Search Menu Menu Main menu Sub menu1 Sub menu2 Sub menu3 Default V alue Remarks Sta r t Ti m e Date : Date of Y esterday Ti m e : C u r r en t Ti m e End T ime Date : Date of T oday Ti m e : C u r r en t Ti m e Channel CH1 Search by T ime Event NONE S till Image Search Sta r t Ti m e Date : Date of Y esterday Ti m e : C u r r en t Ti m e ...

  • Speco Technologies DVR-T4IP - page 122

    122 5.4 Protocol 5.4.1 Code t able No Protocol Description Remarks 1 kmute Audio Mute 2 krec Record 3 khdd HDD Information 4 knet Network user information 5 klog Log Display 6 kinfo System Information 7 knum1 Number 1 8 knum2 Number 2 9 knum3 Number 3 10 knum4 Number 4 1 1 knum5 Number 5 12 knum6 Number 6 13 knum7 Number 7 14 knum8 Number 8 15 knum ...

  • Speco Technologies DVR-T4IP - page 123

    123 50 ks1 Shuttle left 1S tep 51 ks2 Shuttle left 2S tep 52 ks3 Shuttle left 3S tep 53 ks4 Shuttle left 4S tep 54 ks5 Shuttle left 5S tep 55 ks6 Shuttle left 6S tep 56 ks7 Shuttle left 7S tep 57 kjleft Jog left 58 kjright Jog right 59 kpower Power 5.4.2 Usage - System protocol to control DVR from remote client software inst alled in PC or remote c ...

  • Speco Technologies DVR-T4IP - page 124

    124 5.5 HDD recording time t able (Based on recording mode, Resolution, picture Quality, FPS) Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 30 39.4 58.1 79.3 97.4 145.7 15 82.0 120.8 165.0 202.7 303.0 Super Fine 7 166.9 245.9 336.0 412.8 617.0 30 60.4 89.0 121.6 149.4 ...

  • Speco Technologies DVR-T4IP - page 125

    125 Recording time per HDD capacity (HR) TV System Record Mode Resolution Quality Frame Rate (fps/CH) 80GB 120GB 160GB 200GB 300GB 25 42.5 62.6 85.5 105.1 157.1 12 71.2 104.9 143.2 176.0 263.1 Super Fine 6 141.2 208.1 284.3 349.3 522.1 25 61.6 90.8 124.0 152.4 227.8 12 125.7 185.3 253.1 311.0 464.9 Fine 6 223.9 329.9 450.7 553.8 827.7 25 98.7 145.4 ...

  • Speco Technologies DVR-T4IP - page 126

    126 Speco T echnologies , 200 New Highway Amityville, N.Y . 1 1701 T oll Free : 1-800-645-5516 In Metro NY : 631-957-8700 Fax:631-957-9142 or 631-957-3880 Web:w w w.specotech.com ...

Manufacturer Speco Technologies Category DVR

Documents that we receive from a manufacturer of a Speco Technologies DVR-T4IP can be divided into several groups. They are, among others:
- Speco Technologies technical drawings
- DVR-T4IP manuals
- Speco Technologies product data sheets
- information booklets
- or energy labels Speco Technologies DVR-T4IP
All of them are important, but the most important information from the point of view of use of the device are in the user manual Speco Technologies DVR-T4IP.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Speco Technologies DVR-T4IP, service manual, brief instructions and user manuals Speco Technologies DVR-T4IP. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Speco Technologies DVR-T4IP.

Similar manuals

A complete manual for the device Speco Technologies DVR-T4IP, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Speco Technologies DVR-T4IP by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Speco Technologies DVR-T4IP.

A complete Speco Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Speco Technologies DVR-T4IP - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Speco Technologies DVR-T4IP, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Speco Technologies DVR-T4IP, that we can find in the current document
3. Tips how to use the basic functions of the device Speco Technologies DVR-T4IP - which should help us in our first steps of using Speco Technologies DVR-T4IP
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Speco Technologies DVR-T4IP
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Speco Technologies DVR-T4IP in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Speco Technologies DVR-T4IP?

Use the form below

If you did not solve your problem by using a manual Speco Technologies DVR-T4IP, ask a question using the form below. If a user had a similar problem with Speco Technologies DVR-T4IP it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)