English dropdown-ico

Manual Teac E24E

74 pages 1.55 mb
Download

Go to site of 74

Summary
  • Teac E24E - page 1

    4X4X24 PortaCD-RW Drive User’ s Manual CDWE24E ® PCMCIA 4X4X6 USB PortaCDRW.book Page 1 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 2

    PortaCDRW.book Page 2 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 3

    TEAC PortaCD-RW User’s Manual i FCC Radio Frequency Interference Regulations Warning: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions contained in this manual, may cause harmful interference to radio and television communications. This equipment has been test ...

  • Teac E24E - page 4

    ii TEAC PortaCD-RW User’s Manual Registration Information There is no need to register any portion of this kit. TEAC provides 100% support for the drive and the recording software. Refer to “Technical Support” on page 64 if you wish to contact TEAC. Product Warranty Information The TEAC PortaCD-RW Drive features a one year warranty from the d ...

  • Teac E24E - page 5

    TEAC PortaCD-RW User’s Manual iii Safety Precautions TEAC CD Rewritable (CD-RW) Drives are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other th ...

  • Teac E24E - page 6

    iv TEAC PortaCD-RW User’s Manual Optical Pickup Declaration of Conformity Optical Pickup Type PU-W204 Laser output Less than 1mW (playback) and 23mW (record) on the objective lens Wavelength 777-787nm Declaration of Conformity Model Number: CDWE24E Trade Name: TEAC Responsible Party: TEAC AMERICA, Inc. Address: 7733 Telegraph Road Montebello, Cal ...

  • Teac E24E - page 7

    TEAC PortaCD-RW User’s Manual v T able of Contents FCC Radio Frequency Interference Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Copyright and Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Registration Information . . . . . . . . . . . . . . . . . . . . . . . ...

  • Teac E24E - page 8

    vi TEAC PortaCD-RW User’s Manual Installing the PortaCD-RW Driver Using the Windows Wizard . . . . . . . . . . . . . . . . . . . 28 For Windows 98SE/Me/2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Chapter 4. Installing and Using Easy CD Creator 5 Basic on Windows Systems . . . . . . . . . . . . . ...

  • Teac E24E - page 9

    TEAC PortaCD-RW User’s Manual vii List of Figures Figure 1. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 2. Removing the Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Figure 3. Front and Right Panels . . . . . . . . . . . ...

  • Teac E24E - page 10

    viii TEAC PortaCD-RW User’s Manual Figure 46. Select a Project Panel: Help Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Figure 47. Help Topics Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Figure 48. Select a Project Panel: Make Music CD . . . . . . . . . . . . . ...

  • Teac E24E - page 11

    PCMCIA Version TEAC PortaCD-RW User’s Manual 1 Chapter 1. Introduction Thank you for choosing the TEAC PortaCD-RW (model CDWE24E). This durable, portable, external PortaCD-RW drive comes in either PCMCIA or USB interface versions. Please refer to the appropriate sections of this document for information on package contents, performance, power req ...

  • Teac E24E - page 12

    Recommended System Requirements 2 TEAC PortaCD-RW User’s Manual Recommended System Requirements The following items represent the minimum system requirements for successful operation of the PortaCD-RW. All systems (both PCMCIA & USB versions): ❑ 64MB of RAM ❑ A hard dri ve that meets or exceeds the follo wing minimum specifications: ❑ ...

  • Teac E24E - page 13

    Unpacking Your PortaCD-RW TEAC PortaCD-RW User’s Manual 3 Unpacking Y our PortaCD-RW Your TEAC PortaCD-RW and accessories are packaged in a sturdy shipping container. Check the package contents list for the version of the PortaCD-RW drive you purchased. If an item is missing, contact the dealer from whom you purchased the drive. PCMCIA V ersion P ...

  • Teac E24E - page 14

    USB Version Package Contents 4 TEAC PortaCD-RW User’s Manual Figure 1. Package Contents PCMCIA card/cable Installation software flopp y disk P ortaCD-RW software plus two b lank discs AC adapter USB interface cab le (only one software disc f or PCMCIA version) (ships only with USB version) (ships only with PCMCIA version) PortaCDRW.book Page 4 We ...

  • Teac E24E - page 15

    Power Sources/Battery TEAC PortaCD-RW User’s Manual 5 Power Sources/Battery This section provides information on the power sources available to the PortaCD- RW, including the battery and the AC adapter. Power Sources The PortaCD-RW drive does not have an On/Off switch. It is ready for operation when you connect it to a computer under one of these ...

  • Teac E24E - page 16

    Removing the Battery Pack 6 TEAC PortaCD-RW User’s Manual Removing the Battery Pack To remove the battery pack, turn the drive upside down and slide open the battery pack cover as illustrated in Figure 2, below. Do not use a metal object to pry or remove the battery pack from the PortaCD-RW drive. Doing so could short circuit the battery pack or ...

  • Teac E24E - page 17

    Front and Right Panels TEAC PortaCD-RW User’s Manual 7 Front and Right Panels Figure 3. Front and Right Panels Eject button: Pressing the Eject button releases the disc tray from the drive. Gently pull the disc tray to open it, or push to close. Some software can control disc ejection. On/Busy indicator: This LED indicator lights up during seek/d ...

  • Teac E24E - page 18

    Operating Orientation 8 TEAC PortaCD-RW User’s Manual Power LED: This LED indicates the power state of the PortaCD-RW, as described in the following table. Operating Orientation Place the TEAC PortaCD-RW drive on a stable, level surface for operation. The surface should be within 10° of horizontal. LED AC Adapter Drive Battery Off — Disconnect ...

  • Teac E24E - page 19

    TEAC PortaCD-RW Drive User’s Manual 9 Chapter 2. Connecting the USB PortaCD-RW Drive to a Windows System This chapter explains how to connect the USB PortaCD-RW drive to an IBM PC compatible computer that features a USB port. It also explains how to install the required software drivers. (For information on connecting the PCMCIA PortaCD-RW to a P ...

  • Teac E24E - page 20

    10 TEAC PortaCD-RW Drive User’s Manual Figure 4. Connecting Cables (USB version) 4. Connect the smaller plug on the USB interface cable to a USB port on the computer . 5. Insert the male plug of the A C power cable into an A C power outlet. This step turns on the power to the PortaCD-RW drive and concludes this procedure. Please see “Installing ...

  • Teac E24E - page 21

    Connecting and Disconnecting the Drive TEAC PortaCD-RW Drive User’s Manual 11 Connecting and Disconnecting the Drive The following paragraphs provide information about connecting and disconnecting your PortaCD-RW drive. Windows 98SE Users: You can plug the USB cable into your computer, or unplug it from the computer while the computer is running ...

  • Teac E24E - page 22

    Installing the Driver Software on Windows 98SE/Me Systems 12 TEAC PortaCD-RW Drive User’s Manual Installing the Driver Software on Windows 98SE/Me Systems Follow these steps to install the software driver on a Windows 98SE/Me system. 1. Complete the steps described in “Connecting the USB PortaCD-R W Drive” on page 9. Windows 98SE/Me automatic ...

  • Teac E24E - page 23

    Installing the Driver Software on Windows 98SE/Me Systems TEAC PortaCD-RW Drive User’s Manual 13 3. Select the Recommended option, then click the Next b utton. The system displays an Add New Hardware Wizard panel that asks if you want to specify the location of the driver software (Figure 8). Figure 8. Add New Hardware Wizard: Specify Search Loca ...

  • Teac E24E - page 24

    Installing the Driver Software on Windows 98SE/Me Systems 14 TEAC PortaCD-RW Drive User’s Manual Figure 10. Add New Hardware Wizard: Software Installation Finished 7. Click the Finish button. The system displays an icon in the My Computer folder and in the Device Manager . (You can access the Device Manager using the following menu sequence: Star ...

  • Teac E24E - page 25

    Drive Letter Allocation TEAC PortaCD-RW Drive User’s Manual 15 Drive Letter Allocation Windows 98SE/Me automatically assigns a drive letter to the new drive during the installation. In some cases, it may be convenient to re-assign drive letters. To do so, follow these steps: 1. Select Start>Settings>Control Panel>System>Device Manager ...

  • Teac E24E - page 26

    Installing the Driver Software on Windows 2000 Systems 16 TEAC PortaCD-RW Drive User’s Manual Installing the Driver Software on Windows 2000 Systems Follow these steps to install the software drive on a Windows 2000 system. 1. Complete the steps described in “Connecting the USB PortaCD-R W Drive” on page 9. Windows 2000 will detect the drive ...

  • Teac E24E - page 27

    Installing the Driver Software on Windows 2000 Systems TEAC PortaCD-RW Drive User’s Manual 17 3. Click the [recommended] option, then click the Next b utton. The system displays a panel that asks if you want to specify the location of the driver software (Figure 15). Figure 15. Found New Hardware Wizard: Locate Driver Files 4. Insert the pro vide ...

  • Teac E24E - page 28

    Installing the Driver Software on Windows 2000 Systems 18 TEAC PortaCD-RW Drive User’s Manual 6. Click the Next button. The system displays the Digital Signature panel (Figure 17). The driver software is 100% compatible with Windows 2000 Professional. Figure 17. Digital Signature Not Found Panel 7. Click the Yes button on the Digital Signature pa ...

  • Teac E24E - page 29

    Installing the Driver Without a Floppy Drive TEAC PortaCD-RW Drive User’s Manual 19 8. Click the Finish button to complete the installation. The system displays an icon in the My Computer folder and in the Device Manager . You can access the Device Manager by using the following menu sequence: Start>Settings>Control Panel>System>Hardw ...

  • Teac E24E - page 30

    Uninstalling the USB Driver Software 20 TEAC PortaCD-RW Drive User’s Manual Uninstalling the USB Driver Software In case you wish to uninstall the driver software, the installation floppy disk contains a program named DriverRemove.exe . This program uninstalls the USB driver software from an IBM PC compatible. You can execute this file directly f ...

  • Teac E24E - page 31

    Uninstalling the USB Driver Software TEAC PortaCD-RW Drive User’s Manual 21 3. Click the Next button. The system advises you to restart your system (Figure 22). Figure 22. Freecom Driver Remove: Restart Windows 4. Select the Restart Windows now option, then click the Finish b utton. 5. After y ou reboot the system, r emove the disk ette from the ...

  • Teac E24E - page 32

    Uninstalling the USB Driver Software 22 TEAC PortaCD-RW Drive User’s Manual PortaCDRW.book Page 22 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 33

    TEAC PortaCD-RW User’s Manual 23 Chapter 3. Connecting the PCMCIA PortaCD-RW to a Windows System This chapter explains how to connect the PCMCIA PortaCD-RW to an IBM PC compatible computer that utilizes PCMCIA card technology. (For information on connecting the USB PortaCD-RW to a PC compatible computer that features a USB port, see “Chapter 2. ...

  • Teac E24E - page 34

    24 TEAC PortaCD-RW User’s Manual Detecting the PCMCIA Card Before you can operate the PortaCD-RW, you must: ❑ make sure Windo ws recognizes the PCMCIA socket, and ❑ install the de vice driv er software on your computer’ s hard disk. To determine whether Windows recognizes the PCMCIA socket in your computer, follow these steps, which may v a ...

  • Teac E24E - page 35

    TEAC PortaCD-RW User’s Manual 25 4. Double-click the item PCMCIA Socket on the Device Manager listing . The Device Manager displays the PCMCIA Socket items currently recognized by the system (see Figure 25 on page 24). If an “x” or “!” mark appears on an item, it is not currently recognized by the system. In this case, you must install th ...

  • Teac E24E - page 36

    26 TEAC PortaCD-RW User’s Manual Installing the PCMCIA Card Using the Windows PC Card Wizard Follow the steps below to install the PCMCIA driver using the PC Card Wizard. 1. Open the Windo ws Control Panel by selecting Start>Settings>Control Panel from the pop-up menu. 2. On the Control P anel, double-click the PC Card (PCMCIA) icon. The sy ...

  • Teac E24E - page 37

    TEAC PortaCD-RW User’s Manual 27 4. Click the Next button. The system displays the following panel (Figure 28): Figure 28. Installation Complete 5. Click the Finish button. The system displays the following panel (Figure 29): Figure 29. System Settings Change 6. Click the Yes button to shut do wn the computer . The system shuts down the computer. ...

  • Teac E24E - page 38

    For Windows 98SE/Me/2000 28 TEAC PortaCD-RW User’s Manual Installing the PortaCD-RW Driver Using the Windows Wizard This section explains how to install the PCMCIA driver using the Windows Add New Hardware Wizard. For Windows 98SE/Me/2000 The installation procedure for the PCMCIA Card Driver varies depending on the version of Windows 98SE/Me/2000 ...

  • Teac E24E - page 39

    For Windows 98SE/Me/2000 TEAC PortaCD-RW User’s Manual 29 Figure 31. Search for the Best Driver 3. Select the Search for best driver option, then click the Next b utton. The system displays the following Add New Hardware Wizard panel (Figure 32), asking you to specify the location of the driver: Figure 32. Select the Floppy Disk Drive 4. Insert t ...

  • Teac E24E - page 40

    For Windows 98SE/Me/2000 30 TEAC PortaCD-RW User’s Manual Figure 33. Driver Located 6. Click the Next button. The system displays the following Add New Hardware Wizard panel (Figure 34), indicating the installation is complete: Figure 34. Installation Complete 7. Click the Finish button. The system displays the following panel (Figure 35): Figure ...

  • Teac E24E - page 41

    For Windows 98SE/Me/2000 TEAC PortaCD-RW User’s Manual 31 9. Remove the floppy disk ette and start the computer . After you start the computer, the system will assign a new drive letter and icon to the PortaCD-RW drive. To fully utilize the drive, you should now install pre-mastering software for your Windows system. For more information, see ? ...

  • Teac E24E - page 42

    For Windows 98SE/Me/2000 32 TEAC PortaCD-RW User’s Manual PortaCDRW.book Page 32 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 43

    TEAC PortaCD-RW User’s Manual 33 Chapter 4. Installing and Using Easy CD Creator 5 Basic on Windows Systems Before installing the software, please make sure that the TEAC PortaCD-RW drive is properly installed as per the instructions in “Chapter 2. Connecting the USB PortaCD-RW Drive to a Windows System” on page 9 or “Chapter 3. Connecting ...

  • Teac E24E - page 44

    Installing Easy CD Creator 5 Software 34 TEAC PortaCD-RW User’s Manual Installing Easy CD Creator 5 Software Before you install Easy CD Creator 5 Basic , disable any applications that may be running in the background, including anti-virus software, screen savers, schedulers, etc. To do so, press CTL-ALT-DEL on your keyboard. The Close Program pan ...

  • Teac E24E - page 45

    Installing Easy CD Creator 5 Software TEAC PortaCD-RW User’s Manual 35 Figure 38. Choose Setup language Panel 2. Select a language and click the OK button. The system displays the following installShield Wizard Welcome panel (Figure 39): Figure 39. InstallShield Wizard Welcome Panel 3. Click the Next button. The system displays the following pane ...

  • Teac E24E - page 46

    Installing Easy CD Creator 5 Software 36 TEAC PortaCD-RW User’s Manual 4. Select a setup type, then click the Next button. The system verifies that you wish to begin the installation (Figure 41). Figure 41. Ready to Install Panel 5. Click the Install button. The system begins the installation and displays a bar graph marking progress (Figure 42): ...

  • Teac E24E - page 47

    Installing Easy CD Creator 5 Software TEAC PortaCD-RW User’s Manual 37 : Figure 43. InstallShield Wizard Completed Panel 6. Click the Finish button to exit InstallShield Wizard . The system advises you to restart the computer to use Easy CD Creator 5 . Figure 44. Restart Panel 7. Click the Yes button to r estart the computer . Once the system reb ...

  • Teac E24E - page 48

    Starting Easy CD Creator 5 38 TEAC PortaCD-RW User’s Manual Starting Easy CD Creator 5 To start Easy CD Creator 5 : 1. Click the Start button on the Windows task bar , and select from the pop- up menu: Programs > Roxio Easy CD Creator 5 > Project Selector. The system displays the Select a Project panel for Easy CD Creator 5 Basic (Figure 45 ...

  • Teac E24E - page 49

    Starting Easy CD Creator 5 TEAC PortaCD-RW User’s Manual 39 Figure 45. Easy CD Creator Select a Project Panel Create custom audio CDs from audio tracks , MP3 files, or W A V files. Create data CDs in sev eral formats. For e xample, you can create discs Upgrade to CD Creator Platinum. Download the latest drive support and software updates via the ...

  • Teac E24E - page 50

    About the Help Files ( help button) 40 TEAC PortaCD-RW User’s Manual About the Help Files ( help button) This document explains the basic operations of Easy CD Creator 5 . To learn more, refer to the extensive on-line Help system. Before you install the program, you can access the Help files by using a browser such as Netscape Navigator or Intern ...

  • Teac E24E - page 51

    About the Help Files ( help button) TEAC PortaCD-RW User’s Manual 41 Figure 47. Help Topics Panel 3. Click a topic in the left column to expand the topic list. Click an item to display detailed inf ormation in the right column. Creating Audio Discs ( make a music CD button) Easy CD Creator 5 Basic enables you to create audio CDs from various sour ...

  • Teac E24E - page 52

    Creating Music CDs ( musicCD button) 42 TEAC PortaCD-RW User’s Manual Creating Music CDs ( musicCD button) To create music CDs: 1. Roll over the make a music CD b utton on the main Select a Project panel (Figure 48 on page 41). The system displays the musicCD project button (Figure 48 on page 41). 2. Click the musicCD project button. The system d ...

  • Teac E24E - page 53

    Formatting Blank Discs for Use With DirectCD ( directCD button) TEAC PortaCD-RW User’s Manual 43 Figure 50. Select a Project Panel: Make a Data CD Button Formatting Blank Discs for Use With DirectCD ( directCD button) If you format a disc for use with DirectCD , you can just drag files to the CD using Windows Explorer . To format a DirectCD disc: ...

  • Teac E24E - page 54

    Creating Archive CDs ( dataCD button) 44 TEAC PortaCD-RW User’s Manual Creating Archive CDs ( dataCD button) You can share or archive your computer files on CD-R or CD-RW discs using various formats. To create an archive disc: 1. Roll over the make a data CD b utton on the main Select a Project panel (Figure 45 on page 39). The system highlights ...

  • Teac E24E - page 55

    Creating Photo or Video CDs ( make a photo or video CD button) TEAC PortaCD-RW User’s Manual 45 Creating Photo or Video CDs ( make a photo or video CD button) If you upgrade to the Platinum version of Easy CD Creator 5 as described in “Upgrading the Software ( upgrade button)” on page 47, the make a photo or video CD button is activated, whic ...

  • Teac E24E - page 56

    Creating Photo or Video CDs ( make a photo or video CD button) 46 TEAC PortaCD-RW User’s Manual Figure 54. Select a Project: CD Copier Button 2. Click the CD copier button. The system displays the Welcome panel (Figure 55), which warns against copyright infringement. Figure 55. CD Copier Welcome Panel 3. Please read the panel, then click the OK b ...

  • Teac E24E - page 57

    Creating Photo or Video CDs ( make a photo or video CD button) TEAC PortaCD-RW User’s Manual 47 Upgrading the Software ( upgrade button) If your computer has access to the Internet, you can upgrade Easy CD Creator 5 Basic to Easy CD Creator Platinum by clicking the upgrade button on the Select a Project panel and following the instructions. Roxio ...

  • Teac E24E - page 58

    Creating CD Labels ( CD label creator button) 48 TEAC PortaCD-RW User’s Manual Creating CD Labels ( CD label creator button) If you upgrade to the Platinum version of Easy CD Creator 5 as described above, the CD Label Creator button is activated, enabling you to create CD labels and design CD jackets. Figure 58. Select a Project: CD Label Creator ...

  • Teac E24E - page 59

    TEAC PortaCD-RW User’s Manual 49 Chapter 5. Connecting the USB PortaCD-RW to and Installing Software on Macintosh Systems You can connect the USB version of the TEAC PortaCD-RW to an Apple Power Macintosh iBook, iMac, PowerBook, or G3 or G4 computer that features a USB port. Connecting to a Macintosh System Follow these steps: 1. Connect the appr ...

  • Teac E24E - page 60

    Before You Disconnect the Cable from the Computer’s USB Port 50 TEAC PortaCD-RW User’s Manual 4. Plug the A C adapter cable into a power outlet. This turns on the power to the PortaCD-RW drive and concludes the procedure for physically connecting the drive to your Apple Macintosh computer. There is no need to install a software driver. This fun ...

  • Teac E24E - page 61

    Installing Toast Software TEAC PortaCD-RW User’s Manual 51 Installing T oast Software Before you can record data onto CD-R or CD-RW discs using your Macintosh computer and your TEAC PortaCD-RW drive, you must first install TEAC/ Toast Software for Macintosh onto your Macintosh computer’s hard disk. The kit includes a CD-ROM that contains the To ...

  • Teac E24E - page 62

    Installing Toast Software 52 TEAC PortaCD-RW User’s Manual Figure 61. Toast Main Installation Panel 3. Double-click the installer in y our desired language. The system displays a continuation panel (Figure 62 on page 52). Figure 62. Continuation Panel 4. Click the Continue button. Toast 4.1.2 installs an English language version of the software. ...

  • Teac E24E - page 63

    Installing Toast Software TEAC PortaCD-RW User’s Manual 53 Figure 63. Read Me/Registration Panel 6. Click the Continue button. The system displays the Toast 4.1.2 Installer panel (Figure 64). Figure 64. Toast 4.1.2 Installer Panel 7. Select the Full Install option by using the pull-down menu in the upper - right corner of the panel. 8. If desired ...

  • Teac E24E - page 64

    Installing Toast Software 54 TEAC PortaCD-RW User’s Manual Figure 65. Installing Panel If the installation is successful, the system then displays an Installation successful panel (Figure 66). Figure 66. Installation Successful Panel 10. Click the Quit button to conclude the installation. Starting T oast To start Toast , follow these steps: 1. Do ...

  • Teac E24E - page 65

    Installing Toast Software TEAC PortaCD-RW User’s Manual 55 2. Double-click the Toast 4.1.2 application icon. The system loads the Toast software and displays the main panel (Figure 68). Figure 68. Toast Main Panel For information on using Toast , refer to the user’s guide in the documentation.pdf file in the Toast 4.1.2 folder. PortaCDRW.book P ...

  • Teac E24E - page 66

    Installing Toast Software 56 TEAC PortaCD-RW User’s Manual PortaCDRW.book Page 56 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 67

    TEAC PortaCD-RW User’s Manual 57 Chapter 6. Connecting to Audio Equipment The PortaCD-RW drive outputs a stereo audio signal from the left and right phono connectors on the right panel. Connect these outputs to the left and right channel inputs on a mixer, amplifier, or powered-speakers. The PortaCD-RW drive outputs a line-level audio signal from ...

  • Teac E24E - page 68

    58 TEAC PortaCD-RW User’s Manual PortaCDRW.book Page 58 Wednesday, April 4, 2001 10:49 PM ...

  • Teac E24E - page 69

    TEAC PortaCD-RW User’s Manual 59 Chapter 7. Handling, Loading, and Ejecting Discs This section explains how to handle, load, and eject discs from the PortaCD-RW. Handling Discs ❑ Handle compact discs only by their edges to av oid getting fingerprints on the surface. Do not touch the disc’ s data surface (non-label side). ❑ Do not place dis ...

  • Teac E24E - page 70

    Loading and Ejecting Discs 60 TEAC PortaCD-RW User’s Manual Loading and Ejecting Discs This section explains how to load and eject discs from the PortaCD-RW. Loading a Disc 1. Press the Open/Eject b utton on the front panel. The PortaCD-R W partially extends the disc tray . Grasp the front bezel and slide the tray fully open. Figure 71. Extending ...

  • Teac E24E - page 71

    Ejecting a Disc TEAC PortaCD-RW User’s Manual 61 Ejecting a Disc 1. T o eject a disc, first make sur e the disc has stopped spinning . Then pr ess the Open/Eject button on the fr ont panel. The PortaCD-R W partially extends the disc tray . Grasp the front bezel and slide the tray fully open. 2. Carefully r emove the disc. You may need to press a ...

  • Teac E24E - page 72

    Recommended Media 62 TEAC PortaCD-RW User’s Manual Recommended Media One blank TEAC CD-R disc and one CD-RW rewritable disc are included in the package with your PortaCD-RW. Use only 74 or 80-minute blank CD-R and CD-RW media from TEAC or the following manufacturers: Disc Formats The TEAC PortaCD-RW drive supports the following disc formats: Disc ...

  • Teac E24E - page 73

    TEAC PortaCD-RW User’s Manual 63 Specifications Specifications and features subject to change without notice or obligation. Model CDWE24E Interface ATAPI (drive side) PCMCIA Card Type II or USB 1.1 Transfer Rate Write and Rewrite: 4X (600KBps) Read: PCMCIA version: 24X maximum (3,600KBps) USB version: 6X maximum (900KBps) Access Time 110 msec (1 ...

  • Teac E24E - page 74

    64 TEAC PortaCD-RW User’s Manual T echnical Support For technical support, please contact the dealer from whom you purchased the drive or the TEAC Service and Support Center nearest you: TEAC America, Inc. (USA) Technical Support Telephone: (323) 727-4860 Fax: (323) 869-8751 Monday - Friday 8:00 a.m. - 5:00 pm PST http://www.teac.com/dspd E-mail: ...

Manufacturer Teac Category CD Player

Documents that we receive from a manufacturer of a Teac E24E can be divided into several groups. They are, among others:
- Teac technical drawings
- E24E manuals
- Teac product data sheets
- information booklets
- or energy labels Teac E24E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Teac E24E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Teac E24E, service manual, brief instructions and user manuals Teac E24E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Teac E24E.

Similar manuals

A complete manual for the device Teac E24E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Teac E24E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Teac E24E.

A complete Teac manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Teac E24E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Teac E24E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Teac E24E, that we can find in the current document
3. Tips how to use the basic functions of the device Teac E24E - which should help us in our first steps of using Teac E24E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Teac E24E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Teac E24E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Teac E24E?

Use the form below

If you did not solve your problem by using a manual Teac E24E, ask a question using the form below. If a user had a similar problem with Teac E24E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)