English dropdown-ico

Manual SMC Networks Barricade SMC7004VWBR V.2

82 pages 4.74 mb
Download

Go to site of 82

Summary
  • SMC Networks Barricade SMC7004VWBR V.2 - page 1

    ghjkjhg SMC7004VWBR SMC7004VWBR V .2 ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 2

    Barricade TM 2.4 GHz 11 Mbps Wireless Cable/DSL Br oadband Router User Guide F rom SMC’ s Barricade line of Broadband Routers May 2003 Pub. # 150 000026400E ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 3

    i T ABLE OF C ONTENTS About the Wireless Barricade Router . . . . . . . . . 1 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the Wirel ess Barricade Rout er . . . . . . . 5 Package Contents . . . . . . . . ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 4

    T AB LE OF C ONTENTS ii Networ k Addre ss Trans lation (N AT) . . . . . . . . . . . . . . . 50 Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 DDNS (D ynam ic DNS) S ettings . . . . . . . . . . . . . . . . . . . 61 UPnP (Universal Plug and Play) Setting . . . . . . . . . . . . 62 Tools . . . . . . . . . . . . ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 5

    1 A BOUT THE W IRELESS B ARRICADE R OUTER Congratula tions on you r purchase of the Wireless Barricade™ Broadband Router. SMC is proud to provide you with a po werful yet simple communicatio n device for connecting your local area network ( LAN) to the Internet. IMPORTANT INFORMATION ! For DSL-User without a flat rate contract. With your DSL-rout ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 6

    About the Wireless Barrica de Router 2 This disconnect only h appens if there are no more o pen requests received from either the LAN or the WAN side (here this can be requests from the internet, i.e. initiated th rough the use of so called file sharing prog rams like eMule, eDon key, etc.) that keep the router active. In order to counter such inca ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 7

    3 LED Indicators The SMC7004VWBR V.2 includes status LED indicators, as described in the following fig ure and table. Features and Benefits • Internet connection to DSL or cable mod em via a 10/100 Mbps WAN port • Local network con nection via 10/100 Mbps Ethernet ports or 11 Mbps wireless interface (su pporting up to 253 users) • 802.11b com ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 8

    About the Wireless Barrica de Router 4 • DHCP for dynamic IP configuration, and DNS fo r domain name m apping • Stateful Packet In spection (SPI) firewall with clien t privileges, hacker prevention, and NAT • NAT also enables multi-user access with a single -user account, and virtua l server functionality (providing protected access to Intern ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 9

    Installing the Wirele ss Barricade Router 5 I NSTALLING THE W IRELESS B ARRICADE R OUTER Before installing the Wireless Barricade™ Broadband Router, verify that you have all th e items listed under “Pac kage Contents. ” If any of the items are missin g or damaged, con tact your local SMC distributor. Also be sure that you have all the necessa ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 10

    Installing the Wireless Barricade Router 6 Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, plea se retain the carton and original packing materials in case there is a ne ed to return the produ ct. Hardware Description The Wireless Barricade can be connecte d to the Intern et using its RJ-45 WAN p ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 11

    Hardware Description 7 • 4 RJ-45 ports for connec ti on to a 10BASE-T/100BASE-TX Ethernet Lo cal Area Net work (LAN). These ports can auto-negotiate the op erating speed to 10 /100 Mbps, the mod e to half/full duplex, and the pin signa ls to MDI/MDI-X (i.e., allowing these ports to be co nnected to any network device with straight-through cable). ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 12

    Installing the Wireless Barricade Router 8 System Requirements You must have an ISP that meets the follo wing minimum requirements: • Internet access from your local teleph one company or Internet Service Provider (ISP) using a DSL modem or cable mo dem. • A PC using a fixed IP address or dynam ic IP address assigned via DHCP, as well as a gate ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 13

    Connect the System 9 Connect the System The Wireless Barricade can be positioned at any convenient location in your office o r home. No special wiring or cooling requirements are ne eded. You should, however comply with the following guidelines: • Keep the Wireless Barricade awa y from any heating devices. • Do not place the Wire less Barricade ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 14

    Installing the Wireless Barricade Router 10 3. P o wer on: Conne ct the po wer a dapter to the Wire less Barricade. Figure 2. Connecting the Wirele ss Barricade Rou ter Attach to Your Network Using Ethernet Cabling The four LAN ports on the Wireless Barricade auto-negotiate the connection speed to 10 Mbps Eth ernet or 100 M bps Fast Ethernet, an d ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 15

    11 Attach to Your Network Using Radio Signals Install a wireless network adapter in each computer that will be connected to the Internet or your local network via radio signals. SMC currently offers several wi re less network cards, including the SMC2602W a nd SMC2632W W ireless cards. Rotate both antennas on the back of the Wireless Barricade to t ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 16

    Installing the Wireless Barricade Router 12 Figure 3. Making the WLAN Connections Attach the Wirele ss Barricade Router to the Inter net If Internet services are provided through an xDSL or cable modem, use unshield ed or shiel ded twisted-pair Ethernet cable (Category 3 or greater) wi th RJ-45 plugs to connect the broadband m odem directly to the ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 17

    Configuring Client TCP/IP 13 C ONFIGURING C LIENT TCP/IP If you have not previously installe d th e TCP/IP protocols on your client PCs, r efer to the follo wing section. If you need information on how to configure a TCP/IP addr ess o n a PC, refer to “Setting Up TCP/IP” on page 15. Installing TCP/IP Windows 95/98/Me 1. Click Start/Settings/Con ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 18

    Configuring Client TCP/IP 14 5. Select Microsoft in the manuf act urers list. Select TCP/IP in the Networ k Protocols lis t. Click the OK bu tton to r etur n to the Network window . 6. The TCP/IP protocol will be listed in the Network window . Clic k OK. The oper ating system ma y prompt you to restar t y our system. Clic k Y es and the computer wi ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 19

    Setting Up TCP/IP 15 4. Doub le-clic k Protocol. 5. Choose Inter net Protocol (TCP/IP). Clic k the OK b utton to return to the Ne twork wind ow . 6. The TCP/IP protocol will be listed in the Network window . Clic k OK to complete the installation procedure . Setting Up TCP/IP To access th e Internet through th e Wireless Barricade, you must configu ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 20

    Configuring Client TCP/IP 16 Note: These settings may be change d to suit your network requirements, but yo u must fi rst configure a t least on e computer as described in this chapter to access the Wireless Barricade’s Web co nfiguration inte rface.See “Configuring th e Wireless Barricade Router” on page 27 for information on con figuring th ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 21

    Setting Up TCP/IP 17 3. On the Network window Configuration tab , doub le-clic k the TCP/IP entr y for y our net work card. 4. Clic k the IP Address tab . 5. Clic k the “Obtain an IP address “option. 6. Ne xt clic k on the Gatew ay tab and v er ify the Gate w a y field is b lank. If there are IP addresses listed in the Ga te wa y section, highl ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 22

    Configuring Client TCP/IP 18 8. On the Network Proper ties Window , clic k the OK bu tton to sa v e these ne w settings . Note: Windows may ask yo u for the o riginal Windows installation disk or additional files. Check for the files at c:windowsoptionscabs, or insert yo ur Windows CD-ROM into you r CDROM drive and check the correct file locatio ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 23

    Setting Up TCP/IP 19 Barricade is functioning. Click OK to clo se the IP Configura tion window . Configuring Your Computer in Windows NT 4.0 1. From the Windows desktop clic k Start/Settings/Control Panel. 2. Double-clic k the Network icon. 3. Clic k on the Protocols tab . 4. Double-clic k TCP/IP Protocol. 5. Clic k on the IP Address tab . ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 24

    Configuring Client TCP/IP 20 6. In the Adap ter drop-d own list, be sure your Ether net adapte r is selected. 7. Clic k on “Obtain a n IP address fro m a DHCP se r ver”. 8. Clic k OK to close the window . 9. Windows ma y cop y files and will then prompt y ou to restar t y our system. Clic k Y es and y our computer will shut do wn and restar t . ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 25

    Setting Up TCP/IP 21 3. T ype IPCONFIG /RENEW and press the <ENTER> k ey . V e rify that y our IP Address is no w 19 2.168.2.xxx, y our Subnet Mask is 255.255 .255.0 and y our Def ault Ga te wa y is 192.168.2.1 . These v alues confir m that the Wireless Barricade is functioning. 4. T ype EXIT an d press <ENTER> to close the Comman d Pro ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 26

    Configuring Client TCP/IP 22 3. Locate and doub le-click th e Local Area Connectio n icon f or the Ether net adapter that is connected to the Wireless Barricade. When the Status dialog box window opens, clic k the Proper ties b utton. 4. In the Local Area Connection Proper ties bo x, v erify the bo x ne xt to Inter net Protocol (TCP/IP) is check e ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 27

    Setting Up TCP/IP 23 2. Locate and doub le-click th e Local Area Connectio n icon f or the Ether net adapter that is connected to the Wireless Barricade. Ne xt, click the Proper ties button. 3. the Local Area Conn ection Proper ties bo x, v erify the bo x ne xt to Inter net Protocol (TCP/IP) is check ed. Then highlig ht the Inter net Protocol (TCP/ ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 28

    Configuring Client TCP/IP 24 2. In the TCP/IP dialog bo x, mak e sure that Ether net is selected in the Connect Via: field. 3. Select Using DHCP Ser ver in the Configure field. 4. Close the TCP/IP dialog bo x. Manual IP Configuration 1. Check Specify an IP address on the IP Ad dress tab. Enter an IP address based on the defa ult network 192.168.2.x ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 29

    25 2. In the Gate wa y tab , add the IP address of th e Wireless Barricade (def ault: 192.168.2.1) in the Ne w gatew ay field and click Add. 3. O n the DNS Configur ation tab , add the IP address f or the Wireless Barricade and clic k Add. This automatically rela ys DNS requests to the DNS ser v er(s) pro vided b y y our ISP . Otherwise, add specif ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 30

    Configuring Client TCP/IP 26 Verifying Your TCP/IP Connection After installing the TCP/IP communicati on protocols and configuring an IP address in the same network a s the Wireless Barricade, use the Ping command to check if yo ur computer has successfully connected to the Wi reless Barricade. The following example shows ho w the Ping procedure ca ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 31

    Configuring the Wire less Barricade Router 27 C ONFIGURING THE W IRELESS B ARRICADE R OUTER The Wireless Barricade Router ca n be configured by any Java-supported browser including In tern et Explorer 5.0 or above, or Netscape Navigator 4.0 or above. Using the Web management interfa ce, you can configure th e Wireless Barricade and view statistics ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 32

    Configurin g the Wireless Ba rricade Rout er 28 This is configured th rough the options/prefe rence section of your browser. Disable Proxy Connection You will also need to verify that the HTTP Proxy feature of your web browser is disabled. This is so that your we b browser will be able to view the Wireless Ba rricade configur ation pages. The follo ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 33

    Netscape (4 or above) 29 Netscape (4 or above) 1. Open Netscape. Click Edit, an d then select Preference s. 2. In the Pref erences window , under Categ or y , doub le-click Adv anced, then select the Pro xies option. 3. Check “Direct conn ecti on to the Inter net . ” 4. Clic k the OK b utton to sa v e th e changes . To access the Wire less Barr ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 34

    Configurin g the Wireless Ba rricade Rout er 30 Navigating the Web Browser Interface The Wireless Barricade’s man agement interface featu res a Setup Wizard and an Adva nced Setup sectio n. Use the Setup Wizard if you want to quic kly se t up the Wireless Barricade for use with a cable modem or DSL modem. Advanced setup supports more advan ced fu ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 35

    Setup Wizard 31 Setup Wizard Time Zone Click on the Setup Wizard pictu re. The first item in the Setup Wizard is Time Zone setup. For accurate timing of client filtering and log events, you need to set the time zone. Select your ti me zone from th e drop-down list, and click NEXT. . Broadband Type Select the type of broadband conn ection you have. ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 36

    Configurin g the Wireless Ba rricade Rout er 32 Cable Modem Your ISP may ha ve given you a ho st name. If so , enter it into the field. Click Finish to complete the setu p. The Status p age will open to allow you to view the connec tion status, as well as other informat ion. See “Status” on page 6 6 for deta ils. ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 37

    Setup Wizard 33 Fixed-IP xDSL Some xDSL Internet Service Providers may assign a fixed (static) IP address. If you have been provided with this informat ion, choose this optio n and enter the assigned IP address, gateway IP address, DNS IP ad dresses, and su bnet mask. Click FI NISH to complete the setup. PPPoE xDSL Enter the PPPoE User Name and Pas ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 38

    Configurin g the Wireless Ba rricade Rout er 34 during inactivity. If the conn ection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 10) Enable the Au to-reconnect option to automatical ly re-esta blish the connection as soon as you atte mpt to access the Internet again. Clic k FINISH to complete the setup. PPTP (P ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 39

    Setup Wizard 35 Note: Please be aware that the setting "Maximum Idle Time" to "0" and/or "Auto-Reconnect" enabled can caus e increased telephone bills. For fu rther information please visit www.smc-euro pe.com or contact SMC's technical su pport team. Enable the Au to-reconnect option to automatical ly re-esta bli ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 40

    Configurin g the Wireless Ba rricade Rout er 36 Advanced Setup Use the Web manageme nt interface to define system parameters, ma nage and control the Wirele ss Barricade and its ports, or monitor netwo rk conditions. The fo llowing table outlines the selections a vailable from this program. Menu Description System Sets the local time zone, the pass ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 41

    Advanced Setup 37 System Time Zone Select your time zone and tim e se rver from the dr op -down list for the Wireless Barricade. This information is used for log entries and client access control. Status Provides WAN connection type and status, firmware and hardware version numbers, system IP settings, as well as DHCP, NAT, and Firewall information ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 42

    Configurin g the Wireless Ba rricade Rout er 38 Password Settings Use this menu to restrict access based on a password. By default, there is no pa ssword. For security you sh ould assign one before exposing the Wirel ess Barricade to the Intern et. Passwords can contain fro m 3–12 alp hanumeric characte rs and are not case sensitive. Note: If you ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 43

    Advanced Setup 39 Remote Management Remote Manage ment allows a remote PC to configure, man age, and monitor the Wireless Barricade using a standard We b browser. Check Enable and enter the IP address of the remote host. Click APPLY. Note: If you specify 0.0.0.0 as this IP add ress, any host can manage the Wireless Barricade . WAN Specify the WAN c ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 44

    Configurin g the Wireless Ba rricade Rout er 40 Dynamic IP The Host N ame is optiona l, but may be required by some ISPs. The default MAC ad dress is set to the WAN’s physical interface on the Wireless Barricade. Use th is address wh en registering for Internet service, and do not change it unless require d by your ISP. If yo ur ISP used the MAC ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 45

    Advanced Setup 41 Point-to-Point Over Ethernet (PPPoE) Enter the PPPoE User Name and Password assigned by your Service Pro vider. The Service Na me is normally optional, but may be required by some service providers. The MTU (Maximum Transm ission Unit) governs the maximu m size of the data pack ets. Leave th is on the default value (14 54) unless ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 46

    Configurin g the Wireless Ba rricade Rout er 42 please visit www.smc-euro pe.com or contact SMC's technical su pport team. Point-to-Point Tunneling Pr otocol (PPTP) Point-to-Point Tunnel ing Protocol (PPTP) can be used to join different physical networks using t he Inte rnet as an interm ediary. Using the above screen allows cli ent PCs to est ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 47

    Advanced Setup 43 maintained durin g inactivity. If the connection is inactive for longer than the Maxi mum Idle Time, it will be dropped. (Default: 10 minutes) Note: Please be aware that the setting "Maximum Idle Time" to "0" and/or "Auto-Reconnect" enabled can caus e increased telephone bills. For fu rther informatio ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 48

    Configurin g the Wireless Ba rricade Rout er 44 BigPond BigPond is a service provider in Australia that uses a heartbeat system to maintain the Internet con nection. Configure th e built-in client with your user name, password and service nam e to get online. Leave the Authentication Se rvice Name as “login-serve r” for a universal configuratio ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 49

    Advanced Setup 45 DNS Domain Name Servers map numerical IP addresse s to the equivalent domain na me (e.g., www.smc. com ). Your ISP should provide the IP address of one or more dom ain name servers. Enter those addresse s in this screen. ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 50

    Configurin g the Wireless Ba rricade Rout er 46 LAN • LAN IP – Use the L AN menu to configu re the LAN IP address for the Wireless Barricade and to enab le the DHCP serve r for dynamic client addre ss allocation. • Lease Time - Set a period for the lea se time if required. For home networks this may be set to Forever, which means ther e is no ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 51

    Advanced Setup 47 Wireless To configure the Wireless Barricade as a wireless access point for wireless clients (eithe r stationary or roam ing), all you need to do is define the radio ch annel, the Service Set identifier (SSID), and encryption option s. Channel and SSID You must specify a common radio chan nel and SSID (Service Set ID) to be used b ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 52

    Configurin g the Wireless Ba rricade Rout er 48 Transmission Rate : Set the data rate tra nsmitte d from the Wireless Barricad e. The lower the data rate, the longer the transm ission distance. (Default: Fully Automatic.) Basic Rate: The highest rate specified is the rate the Wireless Barricade will use when transmitting broadcast/multicas t and ma ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 53

    Advanced Setup 49 You may automatically gene rate encryptio n keys or manually enter the keys. For automa tic 64-bit security, ente r a passphra se and click Generate. Four keys will be genera ted (as shown below). Choose a key from th e drop-down list or accept the default key. Automatic 128-bit se curity generates a single key. ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 54

    Configurin g the Wireless Ba rricade Rout er 50 If you use encryption, configure the same ke ys used for the Wireless Barricade on each of your wireless clients. Note that Wired Equivalent Privacy (WEP) protects data transmitted between wireless n odes, but d oes not protect any transmissions over you r wired network o r over th e Internet . Networ ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 55

    Advanced Setup 51 Virtual Server If you configure the Wireless Barricade as a virtual server, remote users accessing services such as Web or FT P at your local site via p ublic IP addresses can b e automatically redire cted to local servers configured with private IP addresses. In other words, depending on th e reque sted service (TCP/UDP port numb ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 56

    Configurin g the Wireless Ba rricade Rout er 52 Special Applications Some applications, such as Internet gaming, videoconfe rencing, Internet telephony and others , require mult iple connect ions. These applications cannot wo rk with Network Address Translation (NAT) enabled. If you n eed to run applications that require multiple connections, use t ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 57

    Advanced Setup 53 Firewall The Wireless Barricade fire wall can provide access control of connected client PCs, blo ck commo n hacker attack s, including IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port loopback, Snor k Attack, TCP null scan, and TCP SYN flooding. The firewall does not significantly affe ct syste ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 58

    Configurin g the Wireless Ba rricade Rout er 54 Note: Click on Add PC and define th e appropriate settin gs for client PC services (as show n in the following screen). ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 59

    Advanced Setup 55 MAC Filtering Table The MAC Filtering feature of the Wi reless Barricade allows you to control access to your network to up to 32 clients based on the MAC (Media Access Control) Address o f the client machine. This ID is unique to each network adapte r. If the MAC address is listed in the table, that client machine will have acces ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 60

    Configurin g the Wireless Ba rricade Rout er 56 URL Blocking To configure the URL Blocking f eature, use the table below to specify the websites ( www.somesite.com ) and/or keywords you want to filt er on your network. To complete this configuration, you will need to create or modify an access rule in “Access Control ” on page 53. To modify an ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 61

    Advanced Setup 57 Schedu le Rul e The Schedule Rule feat ure allows you to co nfigure specific rule s based on Time and Date. These rules can the n be used to configure more specific Access Cont rol. Enables Schedule-ba sed Internet access control. 1. Click Add Schedule Rule. 2. Define the se ttings f or the sche dule rule (as sho wn on the f ollow ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 62

    Configurin g the Wireless Ba rricade Rout er 58 Use this section to create your network schedule ru les. The times you set below are the times period s that you want the Access Control Rule to be active . For ex ample, if y ou want t o block Intern et access (block WWW) from 9AM to 9PM during the week. Simply configure 9:00 AM as “Start Time” a ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 63

    Advanced Setup 59 Intrusion Detection Firewall Configuration • SPI (Stateful Packet Inspec tion) and A nti-DoS firewa ll protection (Default: Enabled) – the Wireless Barricade’s Intrusion Detection feature limits access for incoming traffic at the WAN port. When the SPI feature is turned on, all incoming packets will be blocked. • Discard P ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 64

    Configurin g the Wireless Ba rricade Rout er 60 DMZ (Demilitar ized Zone) If you have a client PC that cannot run an Internet application properly from behind the firewall, then you can open the client up to unrestricted two-way Internet access. Enter the IP address o f a DMZ host to this screen. Adding a client to th e DMZ may expose your local ne ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 65

    Advanced Setup 61 DDNS (Dynamic DN S) Settings Domain Name is a series of alphanumeric string s separated by periods, that is the ad dress of a network con nection and that identifies the owner of th e address. Dynamic DNS provides us ers on the Intern et with a method to tie their domain name (s) to computer s or servers. DDNS allows your domain n ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 66

    Configurin g the Wireless Ba rricade Rout er 62 This DNS feature is power ed by TZO.com. With a DDNS connection you can host your own web site, email se rver, FTP site, and more at your own location even if you ha ve a dy namic IP address. (De fault: Disa ble) UPnP (Universal Plug and Play) Setting Enable UPnP by che cking ON in the screen above. U ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 67

    Advanced Setup 63 Tools Use the Tools menu to backu p the current configuration, re store a previously saved con figuration, restore fa ctory settings, update firmware , and reset the Wir eless Barr icade. Tools - Configuratio n Tools • Backup – saves the Wireless Barrica de’s configuration to a file. • Restore – restores settings fr om a ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 68

    Configurin g the Wireless Ba rricade Rout er 64 Tools - Firmware Upgrade Use this screen to update the firmwa re or user interface to the latest versions . Down lo ad the upgrade file from the SMC Web site ( www.smc.com ) and save it to your hard drive. In the Upgrade Targ et field, choose Firmware. Then click Browse to look for the previously down ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 69

    65 Tools - Reset Click APPLY to reset the Wireless Barricade. The reset will be complete when the po wer LED stops blinking. Note: If you use th e Reset butto n on the front panel, the Wireless Bar ricade perf orms a power reset. If th e button is held depressed for over five seco nds, all the LEDs will illuminate and the factory settings will be r ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 70

    Configurin g the Wireless Ba rricade Rout er 66 Status The Status screen displays WAN/L AN connection status, firmware , and ha rdware version numbers, illega l attempts to access your network, as well as information on DHCP clients connected to your network. The following it ems are incl uded on this s creen: Section Description INTERNET Displays ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 71

    Troubleshooting 67 T ROUBLESHOOTING The information outlined in this se ction describes some useful steps for getting yo ur computer and the Wirele ss Barricade Router o nline. A. Ver ify your connection to the Wireless Ba rricade If you are unable to access the Wireless Barric ade’s web-bas ed administration page s then you may not be properly c ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 72

    Troubleshootin g 68 If you have any othe r IP address informa tion listed see below . If you have an IP address that starts with 169.254.XXX.XXX then see the next section. If you have an other IP address con figured, then see section C. B. I am getting an IP Address that star ts with 169.254.XXX.XXX If you are getting this IP Address, then you need ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 73

    69 C. I have another IP Address displayed If you have another IP address listed then the PC may no t be configured for a DHCP connection. Please refer to “Configuring Client TCP/IP” on page 13 for information. Once you have confirmed your computer is configured for DHCP, then please follow the step s below. 1. Open a DO S window as described ab ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 74

    Troubleshootin g 70 D. Th e 10/100 LED does not light after a con nection is made. 1. Check that the ho st computer and hub are both p owered on. 2. Be sure the netw ork cable is connected to bo th de vices. 3. V er ify that Categor y 5 cab le is used if you are operating at 100 Mbps , and that the length of an y cab le does not e xceed 100 m (328 ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 75

    Specifications 71 S PECIFICATIONS Below is an outline of the T e ch nical Specificat ions f or the SMC7004VWBR V .2 Standards IEEE 802.3 10BASE-T Ether net IEEE 802.3u 100BASE-TX F ast E ther net IEEE 802.11b LAN Interface 4 - RJ-45 10/100 Mbps A uto MDI/MDI-X por ts WAN Interface 1- RJ-45 10/100 Mbps Auto MDI/MDI-X por t Manage ment W eb managemen ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 76

    Specifications 72 Input Power 9 V (1 A) Internet Standards ARP (RFC 826), IP (RFC 791), IC MP (RFC 792), UDP (RFC 768), TCP (RFC 793), T elnet (R FC 854-859), MD5 (RF C 1321), BOO TP Extension (RFC 1497), PPP LCP Extension (RFC 1570), PPP oE (RFC 2516), NA T (RFC 1631), PPP (RFC 1661), HTML (RFC 1866), HTTP (RFC 1945), CHAP (RFC 1944), DHCP (RFC 21 ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 77

    i C OMPLIANCES FCC - Class B This equipment has been tested and found to co mply with the limits f or a Class B digital device , pu rsuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against ha r mful interference in a residential installation. This equipment g enerates, uses and can radiate radio freq ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 78

    Compliances ii Industry Canada - Class B This digital apparatus does not e xceed the Class B limits for r adio noise emissions from digital apparatus as set out in the inte rf ere nce-causing equipment standard entitled “Digital Apparatus” ICES-003 of the Depar tment of Communications. Cet appareil numérique respecte les limites de br uits rad ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 79

    iii L EGAL I NFORMATION AND C ONTACTS SM C's Limited Warranty Statement S M C N etw orks E urop e ("S M C" ) w a rran ts its pr od ucts to b e fre e fro m def ec ts in workmanshi p and mat eri al s, under normal use and serv i ce, f or the ap pli ca ble war rant y term. All SM C products carry a st anda rd 2 year limit ed w arrant y ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 80

    Legal Informa tion and Conta cts iv I NCLUDI NG WARRANTI ES OR CONDI TI ONS OF MERCHANT ABI LI TY AND FI TNESS FOR A PA RTI CULAR PURP OSE. SMC NEIT HER ASSUMES NOR AUTHORI ZES ANY OTHER PERS ON TO ASSUME FOR IT ANY OTHER LI ABI LI TY I N CONNECTIO N W I TH THE SALE, I NSTAL LAT ION, MAI NTENANCE OR USE OF I TS PRODUCTS. SMC SHALL NOT BE LI AB LE U ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 81

    Legal Informat ion and Contacts v Statement of Conditi ons In l i ne wi th our cont inue d ef for t s t o impr ove i nt ernal d esig n, o pera ti onal f unct i on, and/ or rel i abi l it y, SMC reser ves t he r ig ht t o make changes t o t he produc t( s) descri be d in t hi s d oc um e nt wit ho ut n otic e . S M C d oe s no t a ss um e an y liab ...

  • SMC Networks Barricade SMC7004VWBR V.2 - page 82

    Model Nu mber: SMC7004 VWBR V .2 Part Number : 15000002 6400E Revision Number E05 2003-R01 F 1.0 ...

Manufacturer SMC Networks Category Network Router

Documents that we receive from a manufacturer of a SMC Networks Barricade SMC7004VWBR V.2 can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- Barricade SMC7004VWBR V.2 manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks Barricade SMC7004VWBR V.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks Barricade SMC7004VWBR V.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks Barricade SMC7004VWBR V.2, service manual, brief instructions and user manuals SMC Networks Barricade SMC7004VWBR V.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks Barricade SMC7004VWBR V.2.

Similar manuals

A complete manual for the device SMC Networks Barricade SMC7004VWBR V.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks Barricade SMC7004VWBR V.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks Barricade SMC7004VWBR V.2.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks Barricade SMC7004VWBR V.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks Barricade SMC7004VWBR V.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks Barricade SMC7004VWBR V.2, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks Barricade SMC7004VWBR V.2 - which should help us in our first steps of using SMC Networks Barricade SMC7004VWBR V.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks Barricade SMC7004VWBR V.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks Barricade SMC7004VWBR V.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks Barricade SMC7004VWBR V.2?

Use the form below

If you did not solve your problem by using a manual SMC Networks Barricade SMC7004VWBR V.2, ask a question using the form below. If a user had a similar problem with SMC Networks Barricade SMC7004VWBR V.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)